aboutsummaryrefslogtreecommitdiffstats
path: root/net/sunrpc/xprtsock.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2010-03-22SUNRPC: Fix a use after free bug with the NFSv4.1 backchannelTrond Myklebust1-3/+0
The ->release_request() callback was designed to allow the transport layer to do housekeeping after the RPC call is done. It cannot be used to free the request itself, and doing so leads to a use-after-free bug in xprt_release(). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-03-18Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6Linus Torvalds1-6/+2
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFS: ensure bdi_unregister is called on mount failure. NFS: Avoid a deadlock in nfs_release_page NFSv4: Don't ignore the NFS_INO_REVAL_FORCED flag in nfs_revalidate_inode() nfs4: Make the v4 callback service hidden nfs: fix unlikely memory leak rpc client can not deal with ENOSOCK, so translate it into ENOCONN
2010-03-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds1-5/+4
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (108 commits) bridge: ensure to unlock in error path in br_multicast_query(). drivers/net/tulip/eeprom.c: fix bogus "(null)" in tulip init messages sky2: Avoid rtnl_unlock without rtnl_lock ipv6: Send netlink notification when DAD fails drivers/net/tg3.c: change the field used with the TG3_FLAG_10_100_ONLY constant ipconfig: Handle devices which take some time to come up. mac80211: Fix memory leak in ieee80211_if_write() mac80211: Fix (dynamic) power save entry ipw2200: use kmalloc for large local variables ath5k: read eeprom IQ calibration values correctly for G mode ath5k: fix I/Q calibration (for real) ath5k: fix TSF reset ath5k: use fixed antenna for tx descriptors libipw: split ieee->networks into small pieces mac80211: Fix sta_mtx unlocking on insert STA failure path rt2x00: remove KSEG1ADDR define from rt2x00soc.h net: add ColdFire support to the smc91x driver asix: fix setting mac address for AX88772 ipv6 ip6_tunnel: eliminate unused recursion field from ip6_tnl{}. net: Fix dev_mc_add() ...
2010-03-08net/sunrpc: Convert (void)snprintf to snprintfJoe Perches1-2/+2
(Applies on top of "Remove uses of NIPQUAD, use %pI4") Casts to void of snprintf are most uncommon in kernel source. 9 use casts, 1301 do not. Remove the remaining uses in net/sunrpc/ Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08net/sunrpc: Remove uses of NIPQUAD, use %pI4Joe Perches1-3/+2
Originally submitted Jan 1, 2010 http://patchwork.kernel.org/patch/71221/ Convert NIPQUAD to the %pI4 format extension where possible Convert %02x%02x%02x%02x/NIPQUAD to %08x/ntohl Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08rpc client can not deal with ENOSOCK, so translate it into ENOCONNBian Naimeng1-6/+2
If NFSv4 client send a request before connect, or the old connection was broken because a ETIMEOUT error catched by call_status, ->send_request will return ENOSOCK, but rpc layer can not deal with it, so make sure ->send_request can translate ENOSOCK into ENOCONN. Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-03-02SUNRPC: Handle EINVAL error returns from the TCP connect operationTrond Myklebust1-0/+5
This can, for instance, happen if the user specifies a link local IPv6 address. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org
2010-02-10xprtsock.c: make bc_{malloc/free} staticH Hartley Sweeten1-2/+2
xprtsock.c: make bc_{malloc/free} static The server backchannel buf_alloc and buf_free methods should be static since they are not used outside this file. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: J. Bruce Fields <bfields@fieldses.org> Cc: Neil Brown <neilb@suse.de> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-12-13Merge branch 'nfs-for-2.6.33'Trond Myklebust1-1/+1
2009-12-03SUNRPC: Allow RPCs to fail quickly if the server is unreachableChuck Lever1-1/+1
The kernel sometimes makes RPC calls to services that aren't running. Because the kernel's RPC client always assumes the hard retry semantic when reconnecting a connection-oriented RPC transport, the underlying reconnect logic takes a long while to time out, even though the remote may have responded immediately with ECONNREFUSED. In certain cases, like upcalls to our local rpcbind daemon, or for NFS mount requests, we'd like the kernel to fail immediately if the remote service isn't reachable. This allows another transport to be tried immediately, or the pending request can be abandoned quickly. Introduce a per-request flag which controls how call_transmit_status() behaves when request transmission fails because the server cannot be reached. We don't want soft connection semantics to apply to other errors. The default case of the switch statement in call_transmit_status() no longer falls through; the fall through code is copied to the default case, and a "break;" is added. The transport's connection re-establishment timeout is also ignored for such requests. We want the request to fail immediately, so the reconnect delay is skipped. Additionally, we don't want a connect failure here to further increase the reconnect timeout value, since this request will not be retried. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-11-18sysctl: Drop & in front of every proc_handler.Eric W. Biederman1-5/+5
For consistency drop & in front of every proc_handler. Explicity taking the address is unnecessary and it prevents optimizations like stubbing the proc_handlers to NULL. Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Joe Perches <joe@perches.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2009-11-12sysctl net: Remove unused binary sysctl codeEric W. Biederman1-16/+2
Now that sys_sysctl is a compatiblity wrapper around /proc/sys all sysctl strategy routines, and all ctl_name and strategy entries in the sysctl tables are unused, and can be revmoed. In addition neigh_sysctl_register has been modified to no longer take a strategy argument and it's callers have been modified not to pass one. Cc: "David Miller" <davem@davemloft.net> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: netdev@vger.kernel.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2009-09-23NFS/RPC: fix problems with reestablish_timeout and related code.Neil Brown1-0/+9
[[resending with correct cc: - "vfs.kernel.org" just isn't right!]] xprt->reestablish_timeout is used to cause TCP connection attempts to back off if the connection fails so as not to hammer the network, but to still allow immediate connections when there is no reason to believe there is a problem. It is not used for the first connection (when transport->sock is NULL) but only on reconnects. It is currently set: a/ to 0 when xs_tcp_state_change finds a state of TCP_FIN_WAIT1 on the assumption that the client has closed the connection so the reconnect should be immediate when needed. b/ to at least XS_TCP_INIT_REEST_TO when xs_tcp_state_change detects TCP_CLOSING or TCP_CLOSE_WAIT on the assumption that the server closed the connection so a small delay at least is required. c/ as above when xs_tcp_state_change detects TCP_SYN_SENT, so that it is never 0 while a connection has been attempted, else the doubling will produce 0 and there will be no backoff. d/ to double is value (up to a limit) when delaying a connection, thus providing exponential backoff and e/ to XS_TCP_INIT_REEST_TO in xs_setup_tcp as simple initialisation. So you can see it is highly dependant on xs_tcp_state_change being called as expected. However experimental evidence shows that xs_tcp_state_change does not see all state changes. ("rpcdebug -m rpc trans" can help show what actually happens). Results show: TCP_ESTABLISHED is reported when a connection is made. TCP_SYN_SENT is never reported, so rule 'c' above is never effective. When the server closes the connection, TCP_CLOSE_WAIT and TCP_LAST_ACK *might* be reported, and TCP_CLOSE is always reported. This rule 'b' above will sometimes be effective, but not reliably. When the client closes the connection, it used to result in TCP_FIN_WAIT1, TCP_FIN_WAIT2, TCP_CLOSE. However since commit f75e674 (SUNRPC: Fix the problem of EADDRNOTAVAIL syslog floods on reconnect) we don't see *any* events on client-close. I think this is because xs_restore_old_callbacks is called to disconnect xs_tcp_state_change before the socket is closed. In any case, rule 'a' no longer applies. So all that is left are rule d, which successfully doubles the timeout which is never rest, and rule e which initialises the timeout. Even if the rules worked as expected, there would be a problem because a successful connection does not reset the timeout, so a sequence of events where the server closes the connection (e.g. during failover testing) will cause longer and longer timeouts with no good reason. This patch: - sets reestablish_timeout to 0 in xs_close thus effecting rule 'a' - sets it to 0 in xs_tcp_data_ready to ensure that a successful connection resets the timeout - sets it to at least XS_TCP_INIT_REEST_TO after it is doubled, thus effecting rule c I have not reimplemented rule b and the new version of rule c seems sufficient. I suspect other code in xs_tcp_data_ready needs to be revised as well. For example I don't think connect_cookie is being incremented as often as it should be. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-09-13nfsd41: sunrpc: add new xprt class for nfsv4.1 backchannelAlexandros Batsakis1-2/+94
[sunrpc: change idle timeout value for the backchannel] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-09-11nfsd41: sunrpc: Added rpc server-side backchannel handlingRahul Iyer1-0/+146
When the call direction is a reply, copy the xid and call direction into the req->rq_private_buf.head[0].iov_base otherwise rpc_verify_header returns rpc_garbage. Signed-off-by: Rahul Iyer <iyer@netapp.com> Signed-off-by: Mike Sager <sager@netapp.com> Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [get rid of CONFIG_NFSD_V4_1] [sunrpc: refactoring of svc_tcp_recvfrom] [nfsd41: sunrpc: create common send routine for the fore and the back channels] [nfsd41: sunrpc: Use free_page() to free server backchannel pages] [nfsd41: sunrpc: Document server backchannel locking] [nfsd41: sunrpc: remove bc_connect_worker()] [nfsd41: sunrpc: Define xprt_server_backchannel()[ [nfsd41: sunrpc: remove bc_close and bc_init_auto_disconnect dummy functions] [nfsd41: sunrpc: eliminate unneeded switch statement in xs_setup_tcp()] [nfsd41: sunrpc: Don't auto close the server backchannel connection] [nfsd41: sunrpc: Remove unused functions] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: change bc_sock to bc_xprt] [nfsd41: sunrpc: move struct rpc_buffer def into a common header file] [nfsd41: sunrpc: use rpc_sleep in bc_send_request so not to block on mutex] [removed cosmetic changes] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [sunrpc: add new xprt class for nfsv4.1 backchannel] [sunrpc: v2.1 change handling of auto_close and init_auto_disconnect operations for the nfsv4.1 backchannel] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> [reverted more cosmetic leftovers] [got rid of xprt_server_backchannel] [separated "nfsd41: sunrpc: add new xprt class for nfsv4.1 backchannel"] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Cc: Trond Myklebust <trond.myklebust@netapp.com> [sunrpc: change idle timeout value for the backchannel] Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Acked-by: Trond Myklebust <trond.myklebust@netapp.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-08-10Merge branch 'patches_cel-for-2.6.32' into nfs-for-2.6.32Trond Myklebust1-138/+97
2009-08-09SUNRPC: Update xprt address strings after an rpcbind completesChuck Lever1-41/+41
After a bind completes, update the transport instance's address strings so debugging messages display the current port the transport is connected to. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-09SUNRPC: Kill RPC_DISPLAY_ALLChuck Lever1-16/+34
At some point, I recall that rpc_pipe_fs used RPC_DISPLAY_ALL. Currently there are no uses of RPC_DISPLAY_ALL outside the transport modules themselves, so we can safely get rid of it. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-09SUNRPC: Rename sock_xprt.addr as sock_xprt.srcaddrChuck Lever1-12/+12
Clean up: Give the "addr" and "port" field less ambiguous names. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-09SUNRPC: Use rpc_ntop() for constructing transport address stringsChuck Lever1-75/+34
Clean up: In addition to using the new generic rpc_ntop() and rpc_get_port() functions, have the RPC client compute the presentation address buffer sizes dynamically using kstrdup(). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-09SUNRPC: Remove duplicate universal address generationChuck Lever1-18/+0
RPC universal address generation is currently done in several places: rpcb_clnt.c, nfs4proc.c xprtsock.c, and xprtrdma.c. Remove the redundant cases that convert a socket address to a universal address. The nfs4proc.c case takes a pre-formatted presentation address string, not a socket address, so we'll leave that one. Because the new uaddr constructor uses the recently introduced rpc_ntop(), it now supports proper "::" shorthanding for IPv6 addresses. This allows the kernel to register properly formed universal addresses with the local rpcbind service, in _all_ cases. The kernel can now also send properly formed universal addresses in RPCB_GETADDR requests, and support link-local properly when encoding and decoding IPv6 addresses. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-09SUNRPC: convert some sysctls into module parametersTrond Myklebust1-0/+52
Parameters like the minimum reserved port, and the number of slot entries should really be module parameters rather than sysctls. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-06-18Merge branch 'devel-for-2.6.31' into for-2.6.31Trond Myklebust1-0/+1
Conflicts: fs/nfs/client.c fs/nfs/super.c
2009-06-17Merge commit 'linux-pnfs/nfs41-for-2.6.31' into nfsv41-for-2.6.31Trond Myklebust1-20/+196
2009-06-17nfs41: Backchannel callback service helper routinesRicardo Labiaga1-0/+3
Executes the backchannel task on the RPC state machine using the existing open connection previously established by the client. Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com> nfs41: Add bc_svc.o to sunrpc Makefile. [nfs41: bc_send() does not need to be exported outside RPC module] [nfs41: xprt_free_bc_request() need not be exported outside RPC module] Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [Update copyright] Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2009-06-17SUNRPC: Fix a missing "break" option in xs_tcp_setup_socket()Trond Myklebust1-0/+1
In the case of -EADDRNOTAVAIL and/or unhandled connection errors, we want to get rid of the existing socket and retry immediately, just as the comment says. Currently we end up sleeping for a minute, due to the missing "break" statement. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-06-17nfs41: New xs_tcp_read_data()Ricardo Labiaga1-18/+126
Handles RPC replies and backchannel callbacks. Traditionally the NFS client has expected only RPC replies on its open connections. With NFSv4.1, callbacks can arrive over an existing open connection. This patch refactors the old xs_tcp_read_request() into an RPC reply handler: xs_tcp_read_reply(), a new backchannel callback handler: xs_tcp_read_callback(), and a common routine to read the data off the transport: xs_tcp_read_common(). The new xs_tcp_read_callback() queues callback requests onto a queue where the callback service (a separate thread) is listening for the processing. This patch incorporates work and suggestions from Rahul Iyer (iyer@netapp.com) and Benny Halevy (bhalevy@panasas.com). xs_tcp_read_callback() drops the connection when the number of expected callbacks is exceeded. Use xprt_force_disconnect(), ensuring tasks on the pending queue are awaken on disconnect. [nfs41: Keep track of RPC call/reply direction with a flag] [nfs41: Preallocate rpc_rqst receive buffer for handling callbacks] Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfs41: sunrpc: xs_tcp_read_callback() should use xprt_force_disconnect()] Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [Moves embedded #ifdefs into #ifdef function blocks] Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2009-06-17nfs41: Process the RPC call directionRicardo Labiaga1-6/+25
Reading and storing the RPC direction is a three step process. 1. xs_tcp_read_calldir() reads the RPC direction, but it will not store it in the XDR buffer since the 'struct rpc_rqst' is not yet available. 2. The 'struct rpc_rqst' is obtained during the TCP_RCV_COPY_DATA state. This state need not necessarily be preceeded by the TCP_RCV_READ_CALLDIR. For example, we may be reading a continuation packet to a large reply. Therefore, we can't simply obtain the 'struct rpc_rqst' during the TCP_RCV_READ_CALLDIR state and assume it's available during TCP_RCV_COPY_DATA. This patch adds a new TCP_RCV_READ_CALLDIR flag to indicate the need to read the RPC direction. It then uses TCP_RCV_COPY_CALLDIR to indicate the RPC direction needs to be saved after the 'struct rpc_rqst' has been allocated. 3. The 'struct rpc_rqst' is obtained by the xs_tcp_read_data() helper functions. xs_tcp_read_common() then saves the RPC direction in the XDR buffer if TCP_RCV_COPY_CALLDIR is set. This will happen when we're reading the data immediately after the direction was read. xs_tcp_read_common() then clears this flag. [was nfs41: Skip past the RPC call direction] Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfs41: sunrpc: Add RPC direction back into the XDR buffer] Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfs41: sunrpc: Don't skip past the RPC call direction] Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2009-06-17nfs41: Add ability to read RPC call direction on TCP stream.Ricardo Labiaga1-3/+49
NFSv4.1 callbacks can arrive over an existing connection. This patch adds the logic to read the RPC call direction (call or reply). It does this by updating the state machine to look for the call direction invoking xs_tcp_read_calldir(...) after reading the XID. [nfs41: Keep track of RPC call/reply direction with a flag] As per 11/14/08 review of RFC 53/85. Add a new flag to track whether the incoming message is an RPC call or an RPC reply. TCP_RPC_REPLY is set in the 'struct sock_xprt' tcp_flags in xs_tcp_read_calldir() if the message is an RPC reply sent on the forechannel. It is cleared if the message is an RPC request sent on the back channel. Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2009-06-03net: skb->dst accessorsEric Dumazet1-1/+1
Define three accessors to get/set dst attached to a skb struct dst_entry *skb_dst(const struct sk_buff *skb) void skb_dst_set(struct sk_buff *skb, struct dst_entry *dst) void skb_dst_drop(struct sk_buff *skb) This one should replace occurrences of : dst_release(skb->dst) skb->dst = NULL; Delete skb->dst field Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-02SUNRPC: Fix the problem of EADDRNOTAVAIL syslog floods on reconnectTrond Myklebust1-5/+21
See http://bugzilla.kernel.org/show_bug.cgi?id=13034 If the port gets into a TIME_WAIT state, then we cannot reconnect without binding to a new port. Tested-by: Petr Vandrovec <petr@vandrovec.name> Tested-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01Merge branch 'devel' into for-linusTrond Myklebust1-135/+228
2009-03-26Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller1-5/+18
Conflicts: drivers/net/wimax/i2400m/usb-notif.c
2009-03-19SUNRPC: Ensure we close the socket on EPIPE errors too...Trond Myklebust1-1/+1
As long as one task is holding the socket lock, then calls to xprt_force_disconnect(xprt) will not succeed in shutting down the socket. In particular, this would mean that a server initiated shutdown will not succeed until the lock is relinquished. In order to avoid the deadlock, we should ensure that xs_tcp_send_request() closes the socket on EPIPE errors too. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-19SUNRPC: xs_tcp_connect_worker{4,6}: merge common codeTrond Myklebust1-68/+72
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-19SUNRPC: Add a sysctl to control the duration of the socket linger timeoutTrond Myklebust1-2/+11
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-19SUNRPC: Add the equivalent of the linger and linger2 timeouts to RPC socketsTrond Myklebust1-17/+81
This fixes a regression against FreeBSD servers as reported by Tomas Kasparek. Apparently when using RPC over a TCP socket, the FreeBSD servers don't ever react to the client closing the socket, and so commit e06799f958bf7f9f8fae15f0c6f519953fb0257c (SUNRPC: Use shutdown() instead of close() when disconnecting a TCP socket) causes the setup to hang forever whenever the client attempts to close and then reconnect. We break the deadlock by adding a 'linger2' style timeout to the socket, after which, the client will abort the connection using a TCP 'RST'. The default timeout is set to 15 seconds. A subsequent patch will put it under user control by means of a systctl. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-11SUNRPC: Ensure that xs_nospace return values are propagatedTrond Myklebust1-4/+7
If xs_nospace() finds that the socket has disconnected, it attempts to return ENOTCONN, however that value is then squashed by the callers. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-11SUNRPC: Delay, then retry on connection errors.Trond Myklebust1-18/+16
Enforce the comment in xs_tcp_connect_worker4/xs_tcp_connect_worker6 that we should delay, then retry on certain connection errors. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-11SUNRPC: Return EAGAIN instead of ENOTCONN when waking up xprt->pendingTrond Myklebust1-27/+31
While we should definitely return socket errors to the task that is currently trying to send data, there is no need to propagate the same error to all the other tasks on xprt->pending. Doing so actually slows down recovery, since it causes more than one tasks to attempt socket recovery. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-11SUNRPC: Handle socket errors correctlyTrond Myklebust1-7/+5
Ensure that we pick up and handle socket errors as they occur. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-11SUNRPC: Handle ECONNREFUSED correctly in xprt_transmit()Trond Myklebust1-14/+12
If we get an ECONNREFUSED error, we currently go to sleep on the 'xprt->sending' wait queue. The problem is that no timeout is set there, and there is nothing else that will wake the task up later. We should deal with ECONNREFUSED in call_status, given that is where we also deal with -EHOSTDOWN, and friends. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-11SUNRPC: Don't disconnect if a connection is still in progress.Trond Myklebust1-4/+14
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-11SUNRPC: Ensure we set XPRT_CLOSING only after we've sent a tcp FIN...Trond Myklebust1-4/+1
...so that we can distinguish between when we need to shutdown and when we don't. Also remove the call to xs_tcp_shutdown() from xs_tcp_connect(), since xprt_connect() makes the same test. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-11SUNRPC: Avoid spurious wake-up during UDP connect processingChuck Lever1-18/+26
To clear out old state, the UDP connect workers unconditionally invoke xs_close() before proceeding with a new connect. Nowadays this causes a spurious wake-up of the task waiting for the connect to complete. This is a little racey, but usually harmless. The waiting task immediately retries the connect via a call_bind/call_connect sequence, which usually finds the transport already in the connected state because the connect worker has finished in the background. To avoid a spurious wake-up, factor the xs_close() logic that resets the underlying socket into a helper, and have the UDP connect workers call that helper instead of xs_close(). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-11SUNRPC: xprt_connect() don't abort the task if the transport isn't boundTrond Myklebust1-4/+9
If the transport isn't bound, then we should just return ENOTCONN, letting call_connect_status() and/or call_status() deal with retrying. Currently, we appear to abort all pending tasks with an EIO error. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-11SUNRPC: Fix an Oops due to socket not set up yet...Trond Myklebust1-1/+9
We can Oops in both xs_udp_send_request() and xs_tcp_send_request() if the call to xs_sendpages() returns an error due to the socket not yet being set up. Deal with that situation by returning a new error: ENOTSOCK, so that we know to avoid dereferencing transport->sock. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-02-06net/sunrpc/xprtsock.c: some common code foundIlpo Järvinen1-32/+21
$ diff-funcs xs_udp_write_space net/sunrpc/xprtsock.c net/sunrpc/xprtsock.c xs_tcp_write_space --- net/sunrpc/xprtsock.c:xs_udp_write_space() +++ net/sunrpc/xprtsock.c:xs_tcp_write_space() @@ -1,4 +1,4 @@ - * xs_udp_write_space - callback invoked when socket buffer space + * xs_tcp_write_space - callback invoked when socket buffer space * becomes available * @sk: socket whose state has changed * @@ -7,12 +7,12 @@ * progress, otherwise we'll waste resources thrashing kernel_sendmsg * with a bunch of small requests. */ -static void xs_udp_write_space(struct sock *sk) +static void xs_tcp_write_space(struct sock *sk) { read_lock(&sk->sk_callback_lock); - /* from net/core/sock.c:sock_def_write_space */ - if (sock_writeable(sk)) { + /* from net/core/stream.c:sk_stream_write_space */ + if (sk_stream_wspace(sk) >= sk_stream_min_wspace(sk)) { struct socket *sock; struct rpc_xprt *xprt; $ codiff net/sunrpc/xprtsock.o net/sunrpc/xprtsock.o.new net/sunrpc/xprtsock.c: xs_tcp_write_space | -163 xs_udp_write_space | -163 2 functions changed, 326 bytes removed net/sunrpc/xprtsock.c: xs_write_space | +179 1 function changed, 179 bytes added net/sunrpc/xprtsock.o.new: 3 functions changed, 179 bytes added, 326 bytes removed, diff: -147 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-02sunrpc: Fix build warning due to typo in %pI4 format changes.David S. Miller1-1/+1
Noticed by Stephen Hemminger. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-31net: replace NIPQUAD() in net/*/Harvey Harrison1-8/+7
Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u can be replaced with %pI4 Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.