aboutsummaryrefslogtreecommitdiffstats
path: root/net/sunrpc (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-03-10SUNRPC: Take the transport send lock before binding+connectingTrond Myklebust1-1/+8
Before trying to bind a port, ensure we grab the send lock to ensure that we don't change the port while another task is busy transmitting requests. The connect code already takes the send lock in xprt_connect(), but it is harmless to take it before that. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-10SUNRPC: Micro-optimise when the task is known not to be sleepingTrond Myklebust1-34/+65
In cases where we know the task is not sleeping, try to optimise away the indirect call to task->tk_action() by replacing it with a direct call. Only change tail calls, to allow gcc to perform tail call elimination. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-10SUNRPC: Check whether the task was transmitted before rebind/reconnectTrond Myklebust1-4/+40
Before initiating transport actions that require putting the task to sleep, such as rebinding or reconnecting, we should check whether or not the task was already transmitted. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-09SUNRPC: Remove redundant calls to RPC_IS_QUEUED()Trond Myklebust2-5/+1
The RPC task wakeup calls all check for RPC_IS_QUEUED() before taking any locks. In addition, rpc_exit() already calls rpc_wake_up_queued_task(). Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-09SUNRPC: Clean upTrond Myklebust1-33/+14
Replace remaining callers of call_timeout() with rpc_check_timeout(). Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-07SUNRPC: Respect RPC call timeouts when retrying transmissionTrond Myklebust1-18/+24
Fix a regression where soft and softconn requests are not timing out as expected. Fixes: 89f90fe1ad8b ("SUNRPC: Allow calls to xprt_transmit() to drain...") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-07SUNRPC: Fix up RPC back channel transmissionTrond Myklebust1-28/+33
Now that transmissions happen through a queue, we require the RPC tasks to handle error conditions that may have been set while they were sleeping. The back channel does not currently do this, but assumes that any error condition happens during its own call to xprt_transmit(). The solution is to ensure that the back channel splits out the error handling just like the forward channel does. Fixes: 89f90fe1ad8b ("SUNRPC: Allow calls to xprt_transmit() to drain...") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-07SUNRPC: Prevent thundering herd when the socket is not connectedTrond Myklebust1-4/+17
If the socket is not connected, then we want to initiate a reconnect rather that trying to transmit requests. If there is a large number of requests queued and waiting for the lock in call_transmit(), then it can take a while for one of the to loop back and retake the lock in call_connect. Fixes: 89f90fe1ad8b ("SUNRPC: Allow calls to xprt_transmit() to drain...") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-02SUNRPC: Allow dynamic allocation of back channel slotsTrond Myklebust1-16/+25
Now that the reads happen in a process context rather than a softirq, it is safe to allocate back channel slots using a reclaiming allocation. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-02SUNRPC: Convert remaining GFP_NOIO, and GFP_NOWAIT sites in sunrpcTrond Myklebust3-8/+5
Convert the remaining gfp_flags arguments in sunrpc to standard reclaiming allocations, now that we set memalloc_nofs_save() as appropriate. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01NFSv4/flexfiles: Abort I/O early if the layout segment was invalidatedTrond Myklebust1-0/+7
If a layout segment gets invalidated while a pNFS I/O operation is queued for transmission, then we ideally want to abort immediately. This is particularly the case when there is a large number of I/O related RPCs queued in the RPC layer, and the layout segment gets invalidated due to an ENOSPC error, or an EACCES (because the client was fenced). We may end up forced to spam the MDS with a lot of otherwise unnecessary LAYOUTERRORs after that I/O fails. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-02-26SUNRPC: Fix an Oops in udp_poll()Trond Myklebust1-2/+19
udp_poll() checks the struct file for the O_NONBLOCK flag, so we must not call it with a NULL file pointer. Fixes: 0ffe86f48026 ("SUNRPC: Use poll() to fix up the socket requeue races") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-02-25Merge tag 'nfs-rdma-for-5.1-1' of git://git.linux-nfs.org/projects/anna/linux-nfsTrond Myklebust27-847/+858
NFSoRDMA client updates for 5.1 New features: - Convert rpc auth layer to use xdr_streams - Config option to disable insecure enctypes - Reduce size of RPC receive buffers Bugfixes and cleanups: - Fix sparse warnings - Check inline size before providing a write chunk - Reduce the receive doorbell rate - Various tracepoint improvements [Trond: Fix up merge conflicts] Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-02-20SUNRPC: Remove the redundant 'zerocopy' argument to xs_sendpages()Trond Myklebust1-12/+4
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-02-20SUNRPC: Further cleanups of xs_sendpages()Trond Myklebust1-10/+1
Now that we send the pages using a struct msghdr, instead of using sendpage(), we no longer need to 'prime the socket' with an address for unconnected UDP messages. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-02-20SUNRPC: Convert socket page send code to use iov_iter()Trond Myklebust2-36/+14
Simplify the page send code using iov_iter and bvecs. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-02-20SUNRPC: Convert xs_send_kvec() to use iov_iter_kvec()Trond Myklebust1-15/+23
Prepare to the socket transmission code to use iov_iter. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-02-20SUNRPC: Initiate a connection close on an ESHUTDOWN error in stream receiveTrond Myklebust1-1/+4
If the client stream receive code receives an ESHUTDOWN error either because the server closed the connection, or because it sent a callback which cannot be processed, then we should shut down the connection. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-02-20SUNRPC: Don't suppress socket errors when a message read completesTrond Myklebust1-5/+2
If the message read completes, but the socket returned an error condition, we should ensure to propagate that error. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-02-20SUNRPC: Handle zero length fragments correctlyTrond Myklebust1-14/+29
A zero length fragment is really a bug, but let's ensure we don't go nuts when one turns up. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-02-20SUNRPC: Don't reset the stream record info when the receive worker is runningTrond Myklebust1-3/+9
To ensure that the receive worker has exclusive access to the stream record info, we must not reset the contents other than when holding the transport->recv_mutex. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-02-20SUNRPC: remove pointless test in unx_match()NeilBrown1-1/+1
As reported by Dan Carpenter, this test for acred->cred being set is inconsistent with the dereference of the pointer a few lines earlier. An 'auth_cred' *always* has ->cred set - every place that creates one initializes this field, often as the first thing done. So remove this test. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-02-20SUNRPC: Ensure rq_bytes_sent is reset before request transmissionTrond Myklebust5-7/+0
When we resend a request, ensure that the 'rq_bytes_sent' is reset to zero. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-02-20SUNRPC: Use poll() to fix up the socket requeue racesTrond Myklebust1-2/+24
Because we clear XPRT_SOCK_DATA_READY before reading, we can end up with a situation where new data arrives, causing xs_data_ready() to queue up a second receive worker job for the same socket, which then immediately gets stuck waiting on the transport receive mutex. The fix is to only clear XPRT_SOCK_DATA_READY once we're done reading, and then to use poll() to check if we might need to queue up a new job in order to deal with any new data. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-02-20SUNRPC: Set memalloc_nofs_save() on all rpciod/xprtiod jobsTrond Myklebust3-3/+17
Set memalloc_nofs_save() on all the rpciod/xprtiod jobs so that we ensure memory allocations for asynchronous rpc calls don't ever end up recursing back to the NFS layer for memory reclaim. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-02-16Merge tag 'nfsd-5.0-2' of git://linux-nfs.org/~bfields/linuxLinus Torvalds1-11/+38
Pull more nfsd fixes from Bruce Fields: "Two small fixes, one for crashes using nfs/krb5 with older enctypes, one that could prevent clients from reclaiming state after a kernel upgrade" * tag 'nfsd-5.0-2' of git://linux-nfs.org/~bfields/linux: sunrpc: fix 4 more call sites that were using stack memory with a scatterlist Revert "nfsd4: return default lease period"
2019-02-16Merge tag 'nfs-for-5.0-4' of git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds2-2/+3
Pull more NFS client fixes from Anna Schumaker: "Three fixes this time. Nicolas's is for xprtrdma completion vector allocation on single-core systems. Greg's adds an error check when allocating a debugfs dentry. And Ben's is an additional fix for nfs_page_async_flush() to prevent pages from accidentally getting truncated. Summary: - Make sure Send CQ is allocated on an existing compvec - Properly check debugfs dentry before using it - Don't use page_file_mapping() after removing a page" * tag 'nfs-for-5.0-4' of git://git.linux-nfs.org/projects/anna/linux-nfs: NFS: Don't use page_file_mapping after removing the page rpc: properly check debugfs dentry before using it xprtrdma: Make sure Send CQ is allocated on an existing compvec
2019-02-15sunrpc: fix 4 more call sites that were using stack memory with a scatterlistScott Mayhew1-11/+38
While trying to reproduce a reported kernel panic on arm64, I discovered that AUTH_GSS basically doesn't work at all with older enctypes on arm64 systems with CONFIG_VMAP_STACK enabled. It turns out there still a few places using stack memory with scatterlists, causing krb5_encrypt() and krb5_decrypt() to produce incorrect results (or a BUG if CONFIG_DEBUG_SG is enabled). Tested with cthon on v4.0/v4.1/v4.2 with krb5/krb5i/krb5p using des3-cbc-sha1 and arcfour-hmac-md5. Signed-off-by: Scott Mayhew <smayhew@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-02-14SUNRPC: Use au_rslack when computing reply buffer sizeChuck Lever1-3/+4
au_rslack is significantly smaller than (au_cslack << 2). Using that value results in smaller receive buffers. In some cases this eliminates an extra segment in Reply chunks (RPC/RDMA). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-14SUNRPC: Add rpc_auth::au_ralign fieldChuck Lever4-6/+16
Currently rpc_inline_rcv_pages() uses au_rslack to estimate the size of the upper layer reply header. This is fine for auth flavors where au_verfsize == au_rslack. However, some auth flavors have more going on. krb5i for example has two more words after the verifier, and another blob following the RPC message. The calculation involving au_rslack pushes the upper layer reply header too far into the rcv_buf. au_rslack is still valuable: it's the amount of buffer space needed for the reply, and is used when allocating the reply buffer. We'll keep that. But, add a new field that can be used to properly estimate the location of the upper layer header in each RPC reply, based on the auth flavor in use. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-14SUNRPC: Make AUTH_SYS and AUTH_NULL set au_verfsizeChuck Lever3-1/+6
au_verfsize will be needed for a non-flavor-specific computation in a subsequent patch. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-14NFS: Account for XDR pad of buf->pagesChuck Lever2-1/+7
Certain NFS results (eg. READLINK) might expect a data payload that is not an exact multiple of 4 bytes. In this case, XDR encoding is required to pad that payload so its length on the wire is a multiple of 4 bytes. The constants that define the maximum size of each NFS result do not appear to account for this extra word. In each case where the data payload is to be received into pages: - 1 word is added to the size of the receive buffer allocated by call_allocate - rpc_inline_rcv_pages subtracts 1 word from @hdrsize so that the extra buffer space falls into the rcv_buf's tail iovec - If buf->pagelen is word-aligned, an XDR pad is not needed and is thus removed from the tail Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-14SUNRPC: Introduce rpc_prepare_reply_pages()Chuck Lever2-0/+28
prepare_reply_buffer() and its NFSv4 equivalents expose the details of the RPC header and the auth slack values to upper layer consumers, creating a layering violation, and duplicating code. Remedy these issues by adding a new RPC client API that hides those details from upper layers in a common helper function. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-14SUNRPC: Add SPDX IDs to some net/sunrpc/auth_gss/ filesChuck Lever8-136/+9
Files under net/sunrpc/auth_gss/ do not yet have SPDX ID tags. This directory is somewhat complicated because most of these files have license boilerplate that is not strictly GPL 2.0. In this patch I add ID tags where there is an obvious match. The less recognizable licenses are still under research. For reference, SPDX IDs added in this patch correspond to the following license text: GPL-2.0 https://spdx.org/licenses/GPL-2.0.html GPL-2.0+ https://spdx.org/licenses/GPL-2.0+.html BSD-3-Clause https://spdx.org/licenses/BSD-3-Clause.html Cc: Simo Sorce <simo@redhat.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-14SUNRPC: Remove xdr_buf_trim()Chuck Lever3-45/+6
The key action of xdr_buf_trim() is that it shortens buf->len, the length of the xdr_buf's content. The other actions -- shortening the head, pages, and tail components -- are actually not necessary. In particular, changing the size of those components can corrupt the RPC message contained in the buffer. This is an accident waiting to happen rather than a current bug, as far as we know. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Bruce Fields <bfields@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-14SUNRPC: Introduce trace points in rpc_auth_gss.koChuck Lever4-89/+99
Add infrastructure for trace points in the RPC_AUTH_GSS kernel module, and add a few sample trace points. These report exceptional or unexpected events, and observe the assignment of GSS sequence numbers. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-14SUNRPC: Use struct xdr_stream when decoding RPC Reply headerChuck Lever5-196/+232
Modernize and harden the code path that parses an RPC Reply message. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-13SUNRPC: Clean up rpc_verify_header()Chuck Lever1-127/+96
- Recover some instruction count because I'm about to introduce a few xdr_inline_decode call sites - Replace dprintk() call sites with trace points - Reduce the hot path so it fits in fewer cachelines I've also renamed it rpc_decode_header() to match everything else in the RPC client. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-13SUNRPC: Use struct xdr_stream when constructing RPC Call headerChuck Lever5-176/+221
Modernize and harden the code path that constructs each RPC Call message. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-13SUNRPC: Add build option to disable support for insecure enctypesChuck Lever2-0/+18
Enable distributions to enforce the rejection of ancient and insecure Kerberos enctypes in the kernel's RPCSEC_GSS implementation. These are the single-DES encryption types that were deprecated in 2012 by RFC 6649. Enctypes that were deprecated more recently (by RFC 8429) remain fully supported for now because they are still likely to be widely used. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Simo Sorce <simo@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-13SUNRPC: Remove rpc_xprt::tsh_sizeChuck Lever6-51/+65
tsh_size was added to accommodate transports that send a pre-amble before each RPC message. However, this assumes the pre-amble is fixed in size, which isn't true for some transports. That makes tsh_size not very generic. Also I'd like to make the estimation of RPC send and receive buffer sizes more precise. tsh_size doesn't currently appear to be accounted for at all by call_allocate. Therefore let's just remove the tsh_size concept, and make the only transports that have a non-zero tsh_size employ a direct approach. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-13SUNRPC: Remove some dprintk() call sites from auth functionsChuck Lever2-37/+1
Clean up: Reduce dprintk noise by removing dprintk() call sites from hot path that do not report exceptions. These are usually replaceable with function graph tracing. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-13SUNRPC: Add trace event that reports reply page vector alignmentChuck Lever1-6/+27
We don't want READ payloads that are partially in the head iovec and in the page buffer because this requires pull-up, which can be expensive. The NFS/RPC client tries hard to predict the size of the head iovec so that the incoming READ data payload lands only in the page vector, but it doesn't always get it right. To help diagnose such problems, add a trace point in the logic that decodes READ-like operations that reports whether pull-up is being done. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-13SUNRPC: Add XDR overflow trace eventChuck Lever1-7/+17
This can help field troubleshooting without needing the overhead of a full network capture (ie, tcpdump). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-13SUNRPC: Add xdr_stream::rqst fieldChuck Lever5-10/+16
Having access to the controlling rpc_rqst means a trace point in the XDR code can report: - the XID - the task ID and client ID - the p_name of RPC being processed Subsequent patches will introduce such trace points. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-13xprtrdma: Reduce the doorbell rate (Receive)Chuck Lever2-0/+12
Post RECV WRs in batches to reduce the hardware doorbell rate per transport. This helps the RPC-over-RDMA client scale better in number of transports. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-13xprtrdma: Check inline size before providing a Write chunkChuck Lever1-1/+17
In very rare cases, an NFS READ operation might predict that the non-payload part of the RPC Call is large. For instance, an NFSv4 COMPOUND with a large GETATTR result, in combination with a large Kerberos credential, could push the non-payload part to be several kilobytes. If the non-payload part is larger than the connection's inline threshold, the client is required to provision a Reply chunk. The current Linux client does not check for this case. There are two obvious ways to handle it: a. Provision a Write chunk for the payload and a Reply chunk for the non-payload part b. Provision a Reply chunk for the whole RPC Reply Some testing at a recent NFS bake-a-thon showed that servers can mostly handle a. but there are some corner cases that do not work yet. b. already works (it has to, to handle krb5i/p), but could be somewhat less efficient. However, I expect this scenario to be very rare -- no-one has reported a problem yet. So I'm going to implement b. Sometime later I will provide some patches to help make b. a little more efficient by more carefully choosing the Reply chunk's segment sizes to ensure the payload is optimally aligned. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-13xprtrdma: Fix sparse warningsChuck Lever2-3/+3
linux/net/sunrpc/xprtrdma/rpc_rdma.c:375:63: warning: incorrect type in argument 5 (different base types) linux/net/sunrpc/xprtrdma/rpc_rdma.c:375:63: expected unsigned int [usertype] xid linux/net/sunrpc/xprtrdma/rpc_rdma.c:375:63: got restricted __be32 [usertype] rq_xid linux/net/sunrpc/xprtrdma/rpc_rdma.c:432:62: warning: incorrect type in argument 5 (different base types) linux/net/sunrpc/xprtrdma/rpc_rdma.c:432:62: expected unsigned int [usertype] xid linux/net/sunrpc/xprtrdma/rpc_rdma.c:432:62: got restricted __be32 [usertype] rq_xid linux/net/sunrpc/xprtrdma/rpc_rdma.c:489:62: warning: incorrect type in argument 5 (different base types) linux/net/sunrpc/xprtrdma/rpc_rdma.c:489:62: expected unsigned int [usertype] xid linux/net/sunrpc/xprtrdma/rpc_rdma.c:489:62: got restricted __be32 [usertype] rq_xid Fixes: 0a93fbcb16e6 ("xprtrdma: Plant XID in on-the-wire RDMA ... ") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-12rpc: properly check debugfs dentry before using itGreg Kroah-Hartman1-1/+1
debugfs can now report an error code if something went wrong instead of just NULL. So if the return value is to be used as a "real" dentry, it needs to be checked if it is an error before dereferencing it. This is now happening because of ff9fb72bc077 ("debugfs: return error values, not NULL"), but why debugfs files are not being created properly is an older issue, probably one that has always been there and should probably be looked at... Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Anna Schumaker <anna.schumaker@netapp.com> Cc: linux-nfs@vger.kernel.org Cc: netdev@vger.kernel.org Reported-by: David Howells <dhowells@redhat.com> Tested-by: David Howells <dhowells@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-12xprtrdma: Make sure Send CQ is allocated on an existing compvecNicolas Morey-Chaisemartin1-1/+2
Make sure the device has at least 2 completion vectors before allocating to compvec#1 Fixes: a4699f5647f3 (xprtrdma: Put Send CQ in IB_POLL_WORKQUEUE mode) Signed-off-by: Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.