Age | Commit message (Collapse) | Author | Files | Lines |
|
This patch introduces a new map type BPF_MAP_TYPE_REUSEPORT_SOCKARRAY.
To unleash the full potential of a bpf prog, it is essential for the
userspace to be capable of directly setting up a bpf map which can then
be consumed by the bpf prog to make decision. In this case, decide which
SO_REUSEPORT sk to serve the incoming request.
By adding BPF_MAP_TYPE_REUSEPORT_SOCKARRAY, the userspace has total control
and visibility on where a SO_REUSEPORT sk should be located in a bpf map.
The later patch will introduce BPF_PROG_TYPE_SK_REUSEPORT such that
the bpf prog can directly select a sk from the bpf map. That will
raise the programmability of the bpf prog attached to a reuseport
group (a group of sk serving the same IP:PORT).
For example, in UDP, the bpf prog can peek into the payload (e.g.
through the "data" pointer introduced in the later patch) to learn
the application level's connection information and then decide which sk
to pick from a bpf map. The userspace can tightly couple the sk's location
in a bpf map with the application logic in generating the UDP payload's
connection information. This connection info contact/API stays within the
userspace.
Also, when used with map-in-map, the userspace can switch the
old-server-process's inner map to a new-server-process's inner map
in one call "bpf_map_update_elem(outer_map, &index, &new_reuseport_array)".
The bpf prog will then direct incoming requests to the new process instead
of the old process. The old process can finish draining the pending
requests (e.g. by "accept()") before closing the old-fds. [Note that
deleting a fd from a bpf map does not necessary mean the fd is closed]
During map_update_elem(),
Only SO_REUSEPORT sk (i.e. which has already been added
to a reuse->socks[]) can be used. That means a SO_REUSEPORT sk that is
"bind()" for UDP or "bind()+listen()" for TCP. These conditions are
ensured in "reuseport_array_update_check()".
A SO_REUSEPORT sk can only be added once to a map (i.e. the
same sk cannot be added twice even to the same map). SO_REUSEPORT
already allows another sk to be created for the same IP:PORT.
There is no need to re-create a similar usage in the BPF side.
When a SO_REUSEPORT is deleted from the "reuse->socks[]" (e.g. "close()"),
it will notify the bpf map to remove it from the map also. It is
done through "bpf_sk_reuseport_detach()" and it will only be called
if >=1 of the "reuse->sock[]" has ever been added to a bpf map.
The map_update()/map_delete() has to be in-sync with the
"reuse->socks[]". Hence, the same "reuseport_lock" used
by "reuse->socks[]" has to be used here also. Care has
been taken to ensure the lock is only acquired when the
adding sk passes some strict tests. and
freeing the map does not require the reuseport_lock.
The reuseport_array will also support lookup from the syscall
side. It will return a sock_gen_cookie(). The sock_gen_cookie()
is on-demand (i.e. a sk's cookie is not generated until the very
first map_lookup_elem()).
The lookup cookie is 64bits but it goes against the logical userspace
expectation on 32bits sizeof(fd) (and as other fd based bpf maps do also).
It may catch user in surprise if we enforce value_size=8 while
userspace still pass a 32bits fd during update. Supporting different
value_size between lookup and update seems unintuitive also.
We also need to consider what if other existing fd based maps want
to return 64bits value from syscall's lookup in the future.
Hence, reuseport_array supports both value_size 4 and 8, and
assuming user will usually use value_size=4. The syscall's lookup
will return ENOSPC on value_size=4. It will will only
return 64bits value from sock_gen_cookie() when user consciously
choose value_size=8 (as a signal that lookup is desired) which then
requires a 64bits value in both lookup and update.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
A later patch will introduce a BPF_MAP_TYPE_REUSEPORT_ARRAY which
allows a SO_REUSEPORT sk to be added to a bpf map. When a sk
is removed from reuse->socks[], it also needs to be removed from
the bpf map. Also, when adding a sk to a bpf map, the bpf
map needs to ensure it is indeed in a reuse->socks[].
Hence, reuseport_lock is needed by the bpf map to ensure its
map_update_elem() and map_delete_elem() operations are in-sync with
the reuse->socks[]. The BPF_MAP_TYPE_REUSEPORT_ARRAY map will only
acquire the reuseport_lock after ensuring the adding sk is already
in a reuseport group (i.e. reuse->socks[]). The map_lookup_elem()
will be lockless.
This patch also adds an ID to sock_reuseport. A later patch
will introduce BPF_PROG_TYPE_SK_REUSEPORT which allows
a bpf prog to select a sk from a bpf map. It is inflexible to
statically enforce a bpf map can only contain the sk belonging to
a particular reuse->socks[] (i.e. same IP:PORT) during the bpf
verification time. For example, think about the the map-in-map situation
where the inner map can be dynamically changed in runtime and the outer
map may have inner maps belonging to different reuseport groups.
Hence, when the bpf prog (in the new BPF_PROG_TYPE_SK_REUSEPORT
type) selects a sk, this selected sk has to be checked to ensure it
belongs to the requesting reuseport group (i.e. the group serving
that IP:PORT).
The "sk->sk_reuseport_cb" pointer cannot be used for this checking
purpose because the pointer value will change after reuseport_grow().
Instead of saving all checking conditions like the ones
preced calling "reuseport_add_sock()" and compare them everytime a
bpf_prog is run, a 32bits ID is introduced to survive the
reuseport_grow(). The ID is only acquired if any of the
reuse->socks[] is added to the newly introduced
"BPF_MAP_TYPE_REUSEPORT_ARRAY" map.
If "BPF_MAP_TYPE_REUSEPORT_ARRAY" is not used, the changes in this
patch is a no-op.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Although the actual cookie check "__cookie_v[46]_check()" does
not involve sk specific info, it checks whether the sk has recent
synq overflow event in "tcp_synq_no_recent_overflow()". The
tcp_sk(sk)->rx_opt.ts_recent_stamp is updated every second
when it has sent out a syncookie (through "tcp_synq_overflow()").
The above per sk "recent synq overflow event timestamp" works well
for non SO_REUSEPORT use case. However, it may cause random
connection request reject/discard when SO_REUSEPORT is used with
syncookie because it fails the "tcp_synq_no_recent_overflow()"
test.
When SO_REUSEPORT is used, it usually has multiple listening
socks serving TCP connection requests destinated to the same local IP:PORT.
There are cases that the TCP-ACK-COOKIE may not be received
by the same sk that sent out the syncookie. For example,
if reuse->socks[] began with {sk0, sk1},
1) sk1 sent out syncookies and tcp_sk(sk1)->rx_opt.ts_recent_stamp
was updated.
2) the reuse->socks[] became {sk1, sk2} later. e.g. sk0 was first closed
and then sk2 was added. Here, sk2 does not have ts_recent_stamp set.
There are other ordering that will trigger the similar situation
below but the idea is the same.
3) When the TCP-ACK-COOKIE comes back, sk2 was selected.
"tcp_synq_no_recent_overflow(sk2)" returns true. In this case,
all syncookies sent by sk1 will be handled (and rejected)
by sk2 while sk1 is still alive.
The userspace may create and remove listening SO_REUSEPORT sockets
as it sees fit. E.g. Adding new thread (and SO_REUSEPORT sock) to handle
incoming requests, old process stopping and new process starting...etc.
With or without SO_ATTACH_REUSEPORT_[CB]BPF,
the sockets leaving and joining a reuseport group makes picking
the same sk to check the syncookie very difficult (if not impossible).
The later patches will allow bpf prog more flexibility in deciding
where a sk should be located in a bpf map and selecting a particular
SO_REUSEPORT sock as it sees fit. e.g. Without closing any sock,
replace the whole bpf reuseport_array in one map_update() by using
map-in-map. Getting the syncookie check working smoothly across
socks in the same "reuse->socks[]" is important.
A partial solution is to set the newly added sk's ts_recent_stamp
to the max ts_recent_stamp of a reuseport group but that will require
to iterate through reuse->socks[] OR
pessimistically set it to "now - TCP_SYNCOOKIE_VALID" when a sk is
joining a reuseport group. However, neither of them will solve the
existing sk getting moved around the reuse->socks[] and that
sk may not have ts_recent_stamp updated, unlikely under continuous
synflood but not impossible.
This patch opts to treat the reuseport group as a whole when
considering the last synq overflow timestamp since
they are serving the same IP:PORT from the userspace
(and BPF program) perspective.
"synq_overflow_ts" is added to "struct sock_reuseport".
The tcp_synq_overflow() and tcp_synq_no_recent_overflow()
will update/check reuse->synq_overflow_ts if the sk is
in a reuseport group. Similar to the reuseport decision in
__inet_lookup_listener(), both sk->sk_reuseport and
sk->sk_reuseport_cb are tested for SO_REUSEPORT usage.
Update on "synq_overflow_ts" happens at roughly once
every second.
A synflood test was done with a 16 rx-queues and 16 reuseport sockets.
No meaningful performance change is observed. Before and
after the change is ~9Mpps in IPv4.
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Pretty print tests for hash/lru_hash maps are added in test_btf.c.
The btf type blob is the same as pretty print array map test.
The test result:
$ mount -t bpf bpf /sys/fs/bpf
$ ./test_btf -p
BTF pretty print array......OK
BTF pretty print hash......OK
BTF pretty print lru hash......OK
PASS:3 SKIP:0 FAIL:0
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Commit a26ca7c982cb ("bpf: btf: Add pretty print support to
the basic arraymap") added pretty print support to array map.
This patch adds pretty print for hash and lru_hash maps.
The following example shows the pretty-print result of
a pinned hashmap:
struct map_value {
int count_a;
int count_b;
};
cat /sys/fs/bpf/pinned_hash_map:
87907: {87907,87908}
57354: {37354,57355}
76625: {76625,76626}
...
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
In function map_seq_next() of kernel/bpf/inode.c,
the first key will be the "0" regardless of the map type.
This works for array. But for hash type, if it happens
key "0" is in the map, the bpffs map show will miss
some items if the key "0" is not the first element of
the first bucket.
This patch fixed the issue by guaranteeing to get
the first element, if the seq_show is just started,
by passing NULL pointer key to map_get_next_key() callback.
This way, no missing elements will occur for
bpffs hash table show even if key "0" is in the map.
Fixes: a26ca7c982cb5 ("bpf: btf: Add pretty print support to the basic arraymap")
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Move XDP and napi related fields from veth_priv to newly created veth_rq
structure.
When xdp_frames are enqueued from ndo_xdp_xmit and XDP_TX, rxq is
selected by current cpu.
When skbs are enqueued from the peer device, rxq is one to one mapping
of its peer txq. This way we have a restriction that the number of rxqs
must not less than the number of peer txqs, but leave the possibility to
achieve bulk skb xmit in the future because txq lock would make it
possible to remove rxq ptr_ring lock.
v3:
- Add extack messages.
- Fix array overrun in veth_xmit.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This allows further redirection of xdp_frames like
NIC -> veth--veth -> veth--veth
(XDP) (XDP) (XDP)
The intermediate XDP, redirecting packets from NIC to the other veth,
reuses xdp_mem_info from NIC so that page recycling of the NIC works on
the destination veth's XDP.
In this way return_frame is not fully guarded by NAPI, since another
NAPI handler on another cpu may use the same xdp_mem_info concurrently.
Thus disable napi_direct by xdp_set_return_frame_no_direct() during the
NAPI context.
v8:
- Don't use xdp_frame pointer address for data_hard_start of xdp_buff.
v4:
- Use xdp_[set|clear]_return_frame_no_direct() instead of a flag in
xdp_mem_info.
v3:
- Fix double free when veth_xdp_tx() returns a positive value.
- Convert xdp_xmit and xdp_redir variables into flags.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
We need some mechanism to disable napi_direct on calling
xdp_return_frame_rx_napi() from some context.
When veth gets support of XDP_REDIRECT, it will redirects packets which
are redirected from other devices. On redirection veth will reuse
xdp_mem_info of the redirection source device to make return_frame work.
But in this case .ndo_xdp_xmit() called from veth redirection uses
xdp_mem_info which is not guarded by NAPI, because the .ndo_xdp_xmit()
is not called directly from the rxq which owns the xdp_mem_info.
This approach introduces a flag in bpf_redirect_info to indicate that
napi_direct should be disabled even when _rx_napi variant is used as
well as helper functions to use it.
A NAPI handler who wants to use this flag needs to call
xdp_set_return_frame_no_direct() before processing packets, and call
xdp_clear_return_frame_no_direct() after xdp_do_flush_map() before
exiting NAPI.
v4:
- Use bpf_redirect_info for storing the flag instead of xdp_mem_info to
avoid per-frame copy cost.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
We are going to add kern_flags field in redirect_info for kernel
internal use.
In order to avoid function call to access the flags, make redirect_info
accessible from modules. Also as it is now non-static, add prefix bpf_
to redirect_info.
v6:
- Fix sparse warning around EXPORT_SYMBOL.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This allows NIC's XDP to redirect packets to veth. The destination veth
device enqueues redirected packets to the napi ring of its peer, then
they are processed by XDP on its peer veth device.
This can be thought as calling another XDP program by XDP program using
REDIRECT, when the peer enables driver XDP.
Note that when the peer veth device does not set driver xdp, redirected
packets will be dropped because the peer is not ready for NAPI.
v4:
- Don't use xdp_ok_fwd_dev() because checking IFF_UP is not necessary.
Add comments about it and check only MTU.
v2:
- Drop the part converting xdp_frame into skb when XDP is not enabled.
- Implement bulk interface of ndo_xdp_xmit.
- Implement XDP_XMIT_FLUSH bit and drop ndo_xdp_flush.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This is preparation for XDP TX and ndo_xdp_xmit.
This allows napi handler to handle xdp_frames through xdp ring as well
as sk_buff.
v8:
- Don't use xdp_frame pointer address to calculate skb->head and
headroom.
v7:
- Use xdp_scrub_frame() instead of memset().
v3:
- Revert v2 change around rings and use a flag to differentiate skb and
xdp_frame, since bulk skb xmit makes little performance difference
for now.
v2:
- Use another ring instead of using flag to differentiate skb and
xdp_frame. This approach makes bulk skb transmit possible in
veth_xmit later.
- Clear xdp_frame feilds in skb->head.
- Implement adjust_tail.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
xdp_frame has kernel pointers which should not be readable from bpf
programs. When we want to reuse xdp_frame region but it may be read by
bpf programs later, we can use this helper to clear kernel pointers.
This is more efficient than calling memset() for the entire struct.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Oversized packets including GSO packets can be dropped if XDP is
enabled on receiver side, so don't send such packets from peer.
Drop TSO and SCTP fragmentation features so that veth devices themselves
segment packets with XDP enabled. Also cap MTU accordingly.
v4:
- Don't auto-adjust MTU but cap max MTU.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This is the basic implementation of veth driver XDP.
Incoming packets are sent from the peer veth device in the form of skb,
so this is generally doing the same thing as generic XDP.
This itself is not so useful, but a starting point to implement other
useful veth XDP features like TX and REDIRECT.
This introduces NAPI when XDP is enabled, because XDP is now heavily
relies on NAPI context. Use ptr_ring to emulate NIC ring. Tx function
enqueues packets to the ring and peer NAPI handler drains the ring.
Currently only one ring is allocated for each veth device, so it does
not scale on multiqueue env. This can be resolved by allocating rings
on the per-queue basis later.
Note that NAPI is not used but netif_rx is used when XDP is not loaded,
so this does not change the default behaviour.
v6:
- Check skb->len only when allocation is needed.
- Add __GFP_NOWARN to alloc_page() as it can be triggered by external
events.
v3:
- Fix race on closing the device.
- Add extack messages in ndo_bpf.
v2:
- Squashed with the patch adding NAPI.
- Implement adjust_tail.
- Don't acquire consumer lock because it is guarded by NAPI.
- Make poll_controller noop since it is unnecessary.
- Register rxq_info on enabling XDP rather than on opening the device.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This is needed for veth XDP which does skb_copy_expand()-like operation.
v2:
- Drop skb_copy_header part because it has already been exported now.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This implement XDP CPU redirection load-balancing across available
CPUs, based on the hashing IP-pairs + L4-protocol. This equivalent to
xdp-cpu-redirect feature in Suricata, which is inspired by the
Suricata 'ippair' hashing code.
An important property is that the hashing is flow symmetric, meaning
that if the source and destination gets swapped then the selected CPU
will remain the same. This is helps locality by placing both directions
of a flows on the same CPU, in a forwarding/routing scenario.
The hashing INITVAL (15485863 the 10^6th prime number) was fairly
arbitrary choosen, but experiments with kernel tree pktgen scripts
(pktgen_sample04_many_flows.sh +pktgen_sample05_flow_per_thread.sh)
showed this improved the distribution.
This patch also change the default loaded XDP program to be this
load-balancer. As based on different user feedback, this seems to be
the expected behavior of the sample xdp_redirect_cpu.
Link: https://github.com/OISF/suricata/commit/796ec08dd7a63
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|