aboutsummaryrefslogtreecommitdiffstats
path: root/net/tipc (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-04-11tipc: purge deferred updates from dead nodesErik Hugne1-0/+19
If a peer node becomes unavailable, in addition to removing the nametable entries from this node we also need to purge all deferred updates associated with this node. Signed-off-by: Erik Hugne <erik.hugne@gmail.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-11tipc: make dist queue pernetErik Hugne3-9/+11
Nametable updates received from the network that cannot be applied immediately are placed on a defer queue. This queue is global to the TIPC module, which might cause problems when using TIPC in containers. To prevent nametable updates from escaping into the wrong namespace, we make the queue pernet instead. Signed-off-by: Erik Hugne <erik.hugne@gmail.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-14tipc: make sure IPv6 header fits in skb headroomRichard Alpe1-1/+1
Expand headroom further in order to be able to fit the larger IPv6 header. Prior to this patch this caused a skb under panic for certain tipc packets when using IPv6 UDP bearer(s). Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11ip_tunnel: add support for setting flow label via collect metadataDaniel Borkmann1-1/+1
This patch extends udp_tunnel6_xmit_skb() to pass in the IPv6 flow label from call sites. Currently, there's no such option and it's always set to zero when writing ip6_flow_hdr(). Add a label member to ip_tunnel_key, so that flow-based tunnels via collect metadata frontends can make use of it. vxlan and geneve will be converted to add flow label support separately. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-15/+21
Several cases of overlapping changes, as well as one instance (vxlan) of a bug fix in 'net' overlapping with code movement in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07tipc: move netlink policies to netlink.cRichard Alpe9-74/+85
Make the c files less cluttered and enable netlink attributes to be shared between files. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-06tipc: remove pre-allocated message header in link structJon Paul Maloy5-77/+45
Until now, we have kept a pre-allocated protocol message header aggregated into struct tipc_link. Apart from adding unnecessary footprint to the link instances, this requires extra code both to initialize and re-initialize it. We now remove this sub-optimization. This change also makes it possible to clean up the function tipc_build_proto_msg() and remove a couple of small functions that were accessing the mentioned header. In particular, we can replace all occurrences of the local function call link_own_addr(link) with the generic tipc_own_addr(net). Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-06tipc: fix nullptr crash during subscription cancelParthasarathy Bhuvaragan1-1/+2
commit 4d5cfcba2f6e ('tipc: fix connection abort during subscription cancel'), removes the check for a valid subscription before calling tipc_nametbl_subscribe(). This will lead to a nullptr exception when we process a subscription cancel request. For a cancel request, a null subscription is passed to tipc_nametbl_subscribe() resulting in exception. In this commit, we call tipc_nametbl_subscribe() only for a valid subscription. Fixes: 4d5cfcba2f6e ('tipc: fix connection abort during subscription cancel') Reported-by: Anders Widell <anders.widell@ericsson.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-06tipc: make sure required IPv6 addresses are scopedRichard Alpe1-0/+5
Make sure the user has provided a scope for multicast and link local addresses used locally by a UDP bearer. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-06tipc: safely copy UDP netlink data from userRichard Alpe1-11/+13
The netlink policy for TIPC_NLA_UDP_LOCAL and TIPC_NLA_UDP_REMOTE is of type binary with a defined length. This causes the policy framework to threat the defined length as maximum length. There is however no protection against a user sending a smaller amount of data. Prior to this patch this wasn't handled which could result in a partially incomplete sockaddr_storage struct containing uninitialized data. In this patch we use nla_memcpy() when copying the user data. This ensures a potential gap at the end is cleared out properly. This was found by Julia with Coccinelle tool. Reported-by: Daniel Borkmann <daniel@iogearbox.net> Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-06tipc: don't check link reset on non existing linkRichard Alpe1-1/+1
Make sure we have a link before checking if it has been reset or not. Prior to this patch tipc_link_is_reset() could be called with a non existing link, resulting in a null pointer dereference. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-06tipc: add net device to skb before UDP xmitRichard Alpe1-0/+2
Prior to this patch enabling a IPv4 UDP bearer caused a null pointer dereference in iptunnel_xmit_stats(), when it tried to dereference the net device from the skb. To resolve this we now point the skb device to the net device resolved from the routing table. Fixes: 039f50629b7f (ip_tunnel: Move stats update to iptunnel_xmit()) Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-03tipc: Revert "tipc: use existing sk_write_queue for outgoing packet chain"Parthasarathy Bhuvaragan1-14/+19
reverts commit 94153e36e709e ("tipc: use existing sk_write_queue for outgoing packet chain") In Commit 94153e36e709e, we assume that we fill & empty the socket's sk_write_queue within the same lock_sock() session. This is not true if the link is congested. During congestion, the socket lock is released while we wait for the congestion to cease. This implementation causes a nullptr exception, if the user space program has several threads accessing the same socket descriptor. Consider two threads of the same program performing the following: Thread1 Thread2 -------------------- ---------------------- Enter tipc_sendmsg() Enter tipc_sendmsg() lock_sock() lock_sock() Enter tipc_link_xmit(), ret=ELINKCONG spin on socket lock.. sk_wait_event() : release_sock() grab socket lock : Enter tipc_link_xmit(), ret=0 : release_sock() Wakeup after congestion lock_sock() skb = skb_peek(pktchain); !! TIPC_SKB_CB(skb)->wakeup_pending = tsk->link_cong; In this case, the second thread transmits the buffers belonging to both thread1 and thread2 successfully. When the first thread wakeup after the congestion it assumes that the pktchain is intact and operates on the skb's in it, which leads to the following exception: [2102.439969] BUG: unable to handle kernel NULL pointer dereference at 00000000000000d0 [2102.440074] IP: [<ffffffffa005f330>] __tipc_link_xmit+0x2b0/0x4d0 [tipc] [2102.440074] PGD 3fa3f067 PUD 3fa6b067 PMD 0 [2102.440074] Oops: 0000 [#1] SMP [2102.440074] CPU: 2 PID: 244 Comm: sender Not tainted 3.12.28 #1 [2102.440074] RIP: 0010:[<ffffffffa005f330>] [<ffffffffa005f330>] __tipc_link_xmit+0x2b0/0x4d0 [tipc] [...] [2102.440074] Call Trace: [2102.440074] [<ffffffff8163f0b9>] ? schedule+0x29/0x70 [2102.440074] [<ffffffffa006a756>] ? tipc_node_unlock+0x46/0x170 [tipc] [2102.440074] [<ffffffffa005f761>] tipc_link_xmit+0x51/0xf0 [tipc] [2102.440074] [<ffffffffa006d8ae>] tipc_send_stream+0x11e/0x4f0 [tipc] [2102.440074] [<ffffffff8106b150>] ? __wake_up_sync+0x20/0x20 [2102.440074] [<ffffffffa006dc9c>] tipc_send_packet+0x1c/0x20 [tipc] [2102.440074] [<ffffffff81502478>] sock_sendmsg+0xa8/0xd0 [2102.440074] [<ffffffff81507895>] ? release_sock+0x145/0x170 [2102.440074] [<ffffffff815030d8>] ___sys_sendmsg+0x3d8/0x3e0 [2102.440074] [<ffffffff816426ae>] ? _raw_spin_unlock+0xe/0x10 [2102.440074] [<ffffffff81115c2a>] ? handle_mm_fault+0x6ca/0x9d0 [2102.440074] [<ffffffff8107dd65>] ? set_next_entity+0x85/0xa0 [2102.440074] [<ffffffff816426de>] ? _raw_spin_unlock_irq+0xe/0x20 [2102.440074] [<ffffffff8107463c>] ? finish_task_switch+0x5c/0xc0 [2102.440074] [<ffffffff8163ea8c>] ? __schedule+0x34c/0x950 [2102.440074] [<ffffffff81504e12>] __sys_sendmsg+0x42/0x80 [2102.440074] [<ffffffff81504e62>] SyS_sendmsg+0x12/0x20 [2102.440074] [<ffffffff8164aed2>] system_call_fastpath+0x16/0x1b In this commit, we maintain the skb list always in the stack. Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25tipc: fix null deref crash in compat config pathFlorian Westphal1-0/+1
msg.dst_sk needs to be set up with a valid socket because some callbacks later derive the netns from it. Fixes: 263ea09084d172d ("Revert "genl: Add genlmsg_new_unicast() for unicast message allocation") Reported-by: Jon Maloy <maloy@donjonn.com> Bisected-by: Jon Maloy <maloy@donjonn.com> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25tipc: fix crash during node removalJon Paul Maloy1-13/+11
When the TIPC module is unloaded, we have identified a race condition that allows a node reference counter to go to zero and the node instance being freed before the node timer is finished with accessing it. This leads to occasional crashes, especially in multi-namespace environments. The scenario goes as follows: CPU0:(node_stop) CPU1:(node_timeout) // ref == 2 1: if(!mod_timer()) 2: if (del_timer()) 3: tipc_node_put() // ref -> 1 4: tipc_node_put() // ref -> 0 5: kfree_rcu(node); 6: tipc_node_get(node) 7: // BOOM! We now clean up this functionality as follows: 1) We remove the node pointer from the node lookup table before we attempt deactivating the timer. This way, we reduce the risk that tipc_node_find() may obtain a valid pointer to an instance marked for deletion; a harmless but undesirable situation. 2) We use del_timer_sync() instead of del_timer() to safely deactivate the node timer without any risk that it might be reactivated by the timeout handler. There is no risk of deadlock here, since the two functions never touch the same spinlocks. 3: We remove a pointless tipc_node_get() + tipc_node_put() from the timeout handler. Reported-by: Zhijiang Hu <huzhijiang@gmail.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25tipc: eliminate risk of finding to-be-deleted node instanceJon Paul Maloy1-9/+9
Although we have never seen it happen, we have identified the following problematic scenario when nodes are stopped and deleted: CPU0: CPU1: tipc_node_xxx() //ref == 1 tipc_node_put() //ref -> 0 tipc_node_find() // node still in table tipc_node_delete() list_del_rcu(n. list) tipc_node_get() //ref -> 1, bad kfree_rcu() tipc_node_put() //ref to 0 again. kfree_rcu() // BOOM! We fix this by introducing use of the conditional kref_get_if_not_zero() instead of kref_get() in the function tipc_node_find(). This eliminates any risk of post-mortem access. Reported-by: Zhijiang Hu <huzhijiang@gmail.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-7/+9
Conflicts: drivers/net/phy/bcm7xxx.c drivers/net/phy/marvell.c drivers/net/vxlan.c All three conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-19tipc: unlock in error pathInsu Yun1-1/+3
tipc_bcast_unlock need to be unlocked in error path. Signed-off-by: Insu Yun <wuninsu@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18Revert "genl: Add genlmsg_new_unicast() for unicast message allocation"Florian Westphal1-1/+0
This reverts commit bb9b18fb55b0 ("genl: Add genlmsg_new_unicast() for unicast message allocation")'. Nothing wrong with it; its no longer needed since this was only for mmapped netlink support. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16tipc: refactor node xmit and fix memory leaksRichard Alpe2-24/+38
Refactor tipc_node_xmit() to fail fast and fail early. Fix several potential memory leaks in unexpected error paths. Reported-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16tipc: fix premature addition of node to lookup tableJon Paul Maloy1-6/+6
In commit 5266698661401a ("tipc: let broadcast packet reception use new link receive function") we introduced a new per-node broadcast reception link instance. This link is created at the moment the node itself is created. Unfortunately, the allocation is done after the node instance has already been added to the node lookup hash table. This creates a potential race condition, where arriving broadcast packets are able to find and access the node before it has been fully initialized, and before the above mentioned link has been created. The result is occasional crashes in the function tipc_bcast_rcv(), which is trying to access the not-yet existing link. We fix this by deferring the addition of the node instance until after it has been fully initialized in the function tipc_node_create(). Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-06tipc: use alloc_ordered_workqueue() instead of WQ_UNBOUND w/ max_active = 1Parthasarathy Bhuvaragan1-2/+2
Until now, tipc_rcv and tipc_send workqueues in server are allocated with parameters WQ_UNBOUND & max_active = 1. This parameters passed to this function makes it equivalent to alloc_ordered_workqueue(). The later form is more explicit and can inherit future ordered_workqueue changes. In this commit we replace alloc_workqueue() with more readable alloc_ordered_workqueue(). Acked-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-06tipc: donot create timers if subscription timeout = TIPC_WAIT_FOREVERParthasarathy Bhuvaragan1-3/+11
Until now, we create timers even for the subscription requests with timeout = TIPC_WAIT_FOREVER. This can be improved by avoiding timer creation when the timeout is set to TIPC_WAIT_FOREVER. In this commit, we introduce a check to creates timers only when timeout != TIPC_WAIT_FOREVER. Acked-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-06tipc: protect tipc_subscrb_get() with subscriber spin lockParthasarathy Bhuvaragan1-2/+2
Until now, during subscription creation the mod_time() & tipc_subscrb_get() are called after releasing the subscriber spin lock. In a SMP system when performing a subscription creation, if the subscription timeout occurs simultaneously (the timer is scheduled to run on another CPU) then the timer thread might decrement the subscribers refcount before the create thread increments the refcount. This can be simulated by creating subscription with timeout=0 and sometimes the timeout occurs before the create request is complete. This leads to the following message: [30.702949] BUG: spinlock bad magic on CPU#1, kworker/u8:3/87 [30.703834] general protection fault: 0000 [#1] SMP [30.704826] CPU: 1 PID: 87 Comm: kworker/u8:3 Not tainted 4.4.0-rc8+ #18 [30.704826] Workqueue: tipc_rcv tipc_recv_work [tipc] [30.704826] task: ffff88003f878600 ti: ffff88003fae0000 task.ti: ffff88003fae0000 [30.704826] RIP: 0010:[<ffffffff8109196c>] [<ffffffff8109196c>] spin_dump+0x5c/0xe0 [...] [30.704826] Call Trace: [30.704826] [<ffffffff81091a16>] spin_bug+0x26/0x30 [30.704826] [<ffffffff81091b75>] do_raw_spin_lock+0xe5/0x120 [30.704826] [<ffffffff81684439>] _raw_spin_lock_bh+0x19/0x20 [30.704826] [<ffffffffa0096f10>] tipc_subscrb_rcv_cb+0x1d0/0x330 [tipc] [30.704826] [<ffffffffa00a37b1>] tipc_receive_from_sock+0xc1/0x150 [tipc] [30.704826] [<ffffffffa00a31df>] tipc_recv_work+0x3f/0x80 [tipc] [30.704826] [<ffffffff8106a739>] process_one_work+0x149/0x3c0 [30.704826] [<ffffffff8106aa16>] worker_thread+0x66/0x460 [30.704826] [<ffffffff8106a9b0>] ? process_one_work+0x3c0/0x3c0 [30.704826] [<ffffffff8106a9b0>] ? process_one_work+0x3c0/0x3c0 [30.704826] [<ffffffff8107029d>] kthread+0xed/0x110 [30.704826] [<ffffffff810701b0>] ? kthread_create_on_node+0x190/0x190 [30.704826] [<ffffffff81684bdf>] ret_from_fork+0x3f/0x70 In this commit, 1. we remove the check for the return code for mod_timer() 2. we protect tipc_subscrb_get() using the subscriber spin lock. We increment the subscriber's refcount as soon as we add the subscription to subscriber's subscription list. Acked-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-06tipc: hold subscriber->lock for tipc_nametbl_subscribe()Parthasarathy Bhuvaragan1-2/+2
Until now, while creating a subscription the subscriber lock protects only the subscribers subscription list and not the nametable. The call to tipc_nametbl_subscribe() is outside the lock. However, at subscription timeout and cancel both the subscribers subscription list and the nametable are protected by the subscriber lock. This asymmetric locking mechanism leads to the following problem: In a SMP system, the timer can be fire on another core before the create request is complete. When the timer thread calls tipc_nametbl_unsubscribe() before create thread calls tipc_nametbl_subscribe(), we get a nullptr exception. This can be simulated by creating subscription with timeout=0 and sometimes the timeout occurs before the create request is complete. The following is the oops: [57.569661] BUG: unable to handle kernel NULL pointer dereference at (null) [57.577498] IP: [<ffffffffa02135aa>] tipc_nametbl_unsubscribe+0x8a/0x120 [tipc] [57.584820] PGD 0 [57.586834] Oops: 0002 [#1] SMP [57.685506] CPU: 14 PID: 10077 Comm: kworker/u40:1 Tainted: P OENX 3.12.48-52.27.1. 9688.1.PTF-default #1 [57.703637] Workqueue: tipc_rcv tipc_recv_work [tipc] [57.708697] task: ffff88064c7f00c0 ti: ffff880629ef4000 task.ti: ffff880629ef4000 [57.716181] RIP: 0010:[<ffffffffa02135aa>] [<ffffffffa02135aa>] tipc_nametbl_unsubscribe+0x8a/ 0x120 [tipc] [...] [57.812327] Call Trace: [57.814806] [<ffffffffa0211c77>] tipc_subscrp_delete+0x37/0x90 [tipc] [57.821357] [<ffffffffa0211e2f>] tipc_subscrp_timeout+0x3f/0x70 [tipc] [57.827982] [<ffffffff810618c1>] call_timer_fn+0x31/0x100 [57.833490] [<ffffffff81062709>] run_timer_softirq+0x1f9/0x2b0 [57.839414] [<ffffffff8105a795>] __do_softirq+0xe5/0x230 [57.844827] [<ffffffff81520d1c>] call_softirq+0x1c/0x30 [57.850150] [<ffffffff81004665>] do_softirq+0x55/0x90 [57.855285] [<ffffffff8105aa35>] irq_exit+0x95/0xa0 [57.860290] [<ffffffff815215b5>] smp_apic_timer_interrupt+0x45/0x60 [57.866644] [<ffffffff8152005d>] apic_timer_interrupt+0x6d/0x80 [57.872686] [<ffffffffa02121c5>] tipc_subscrb_rcv_cb+0x2a5/0x3f0 [tipc] [57.879425] [<ffffffffa021c65f>] tipc_receive_from_sock+0x9f/0x100 [tipc] [57.886324] [<ffffffffa021c826>] tipc_recv_work+0x26/0x60 [tipc] [57.892463] [<ffffffff8106fb22>] process_one_work+0x172/0x420 [57.898309] [<ffffffff8107079a>] worker_thread+0x11a/0x3c0 [57.903871] [<ffffffff81077114>] kthread+0xb4/0xc0 [57.908751] [<ffffffff8151f318>] ret_from_fork+0x58/0x90 In this commit, we do the following at subscription creation: 1. set the subscription's subscriber pointer before performing tipc_nametbl_subscribe(), as this value is required further in the call chain ex: by tipc_subscrp_send_event(). 2. move tipc_nametbl_subscribe() under the scope of subscriber lock Acked-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-06tipc: fix connection abort when receiving invalid cancel requestParthasarathy Bhuvaragan1-1/+2
Until now, the subscribers endianness for a subscription create/cancel request is determined as: swap = !(s->filter & (TIPC_SUB_PORTS | TIPC_SUB_SERVICE)) The checks are performed only for port/service subscriptions. The swap calculation is incorrect if the filter in the subscription cancellation request is set to TIPC_SUB_CANCEL (it's a malformed cancel request, as the corresponding subscription create filter is missing). Thus, the check if the request is for cancellation fails and the request is treated as a subscription create request. The subscription creation fails as the request is illegal, which terminates this connection. In this commit we determine the endianness by including TIPC_SUB_CANCEL, which will set swap correctly and the request is processed as a cancellation request. Acked-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-06tipc: fix connection abort during subscription cancellationParthasarathy Bhuvaragan1-19/+19
In 'commit 7fe8097cef5f ("tipc: fix nullpointer bug when subscribing to events")', we terminate the connection if the subscription creation fails. In the same commit, the subscription creation result was based on the value of subscription pointer (set in the function) instead of the return code. Unfortunately, the same function also handles subscription cancellation request. For a subscription cancellation request, the subscription pointer cannot be set. Thus the connection is terminated during cancellation request. In this commit, we move the subcription cancel check outside of tipc_subscrp_create(). Hence, - tipc_subscrp_create() will create a subscripton - tipc_subscrb_rcv_cb() will subscribe or cancel a subscription. Fixes: 'commit 7fe8097cef5f ("tipc: fix nullpointer bug when subscribing to events")' Acked-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-06tipc: introduce tipc_subscrb_subscribe() routineParthasarathy Bhuvaragan1-23/+31
In this commit, we split tipc_subscrp_create() into two: 1. tipc_subscrp_create() creates a subscription 2. A new function tipc_subscrp_subscribe() adds the subscription to the subscriber subscription list, activates the subscription timer and subscribes to the nametable updates. In future commits, the purpose of tipc_subscrb_rcv_cb() will be to either subscribe or cancel a subscription. There is no functional change in this commit. Acked-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-06tipc: remove struct tipc_name_seq from struct tipc_subscriptionParthasarathy Bhuvaragan3-16/+37
Until now, struct tipc_subscriber has duplicate fields for type, upper and lower (as member of struct tipc_name_seq) at: 1. as member seq in struct tipc_subscription 2. as member seq in struct tipc_subscr, which is contained in struct tipc_event The former structure contains the type, upper and lower values in network byte order and the later contains the intact copy of the request. The struct tipc_subscription contains a field swap to determine if request needs network byte order conversion. Thus by using swap, we can convert the request when required instead of duplicating it. In this commit, 1. we remove the references to these elements as members of struct tipc_subscription and replace them with elements from struct tipc_subscr. 2. provide new functions to convert the user request into network byte order. Acked-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-06tipc: remove filter and timeout elements from struct tipc_subscriptionParthasarathy Bhuvaragan2-12/+8
Until now, struct tipc_subscription has duplicate timeout and filter attributes present: 1. directly as members of struct tipc_subscription 2. in struct tipc_subscr, which is contained in struct tipc_event In this commit, we remove the references to these elements as members of struct tipc_subscription and replace them with elements from struct tipc_subscr. Acked-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-06tipc: remove incorrect check for subscription timeout valueParthasarathy Bhuvaragan1-2/+1
Until now, during subscription creation we set sub->timeout by converting the timeout request value in milliseconds to jiffies. This is followed by setting the timeout value in the timer if sub->timeout != TIPC_WAIT_FOREVER. For a subscription create request with a timeout value of TIPC_WAIT_FOREVER, msecs_to_jiffies(TIPC_WAIT_FOREVER) returns MAX_JIFFY_OFFSET (0xfffffffe). This is not equal to TIPC_WAIT_FOREVER (0xffffffff). In this commit, we remove this check. Acked-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-06tipc: fix link priority propagationRichard Alpe1-0/+6
Currently link priority changes isn't handled for active links. In this patch we resolve this by changing our priority if the peer passes a valid priority in a state message. Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-06tipc: fix link attribute propagation bugRichard Alpe3-30/+16
Changing certain link attributes (link tolerance and link priority) from the TIPC management tool is supposed to automatically take effect at both endpoints of the affected link. Currently the media address is not instantiated for the link and is used uninstantiated when crafting protocol messages designated for the peer endpoint. This means that changing a link property currently results in the property being changed on the local machine but the protocol message designated for the peer gets lost. Resulting in property discrepancy between the endpoints. In this patch we resolve this by using the media address from the link entry and using the bearer transmit function to send it. Hence, we can now eliminate the redundant function tipc_link_prot_xmit() and the redundant field tipc_link::media_addr. Fixes: 2af5ae372a4b (tipc: clean up unused code and structures) Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Reported-by: Jason Hu <huzhijiang@gmail.com> Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-29tipc: fix connection abort during subscription cancelParthasarathy Bhuvaragan1-6/+5
In 'commit 7fe8097cef5f ("tipc: fix nullpointer bug when subscribing to events")', we terminate the connection if the subscription creation fails. In the same commit, the subscription creation result was based on the value of the subscription pointer (set in the function) instead of the return code. Unfortunately, the same function tipc_subscrp_create() handles subscription cancel request. For a subscription cancellation request, the subscription pointer cannot be set. Thus if a subscriber has several subscriptions and cancels any of them, the connection is terminated. In this commit, we terminate the connection based on the return value of tipc_subscrp_create(). Fixes: commit 7fe8097cef5f ("tipc: fix nullpointer bug when subscribing to events") Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-25ip_tunnel: Move stats update to iptunnel_xmit()Pravin B Shelar1-9/+3
By moving stats update into iptunnel_xmit(), we can simplify iptunnel_xmit() usage. With this change there is no need to call another function (iptunnel_xmit_stats()) to update stats in tunnel xmit code path. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-5/+14
Conflicts: drivers/net/ethernet/renesas/ravb_main.c kernel/bpf/syscall.c net/ipv4/ipmr.c All three conflicts were cases of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03tipc: fix node reference count bugJon Paul Maloy1-8/+7
Commit 5405ff6e15f40f2f ("tipc: convert node lock to rwlock") introduced a bug to the node reference counter handling. When a message is successfully sent in the function tipc_node_xmit(), we return directly after releasing the node lock, instead of continuing and decrementing the node reference counter as we should do. This commit fixes this bug. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-30net: Generalise wq_has_sleeper helperHerbert Xu1-2/+2
The memory barrier in the helper wq_has_sleeper is needed by just about every user of waitqueue_active. This patch generalises it by making it take a wait_queue_head_t directly. The existing helper is renamed to skwq_has_sleeper. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-24tipc: fix error handling of expanding buffer headroomYing Xue1-2/+5
Coverity says: *** CID 1338065: Error handling issues (CHECKED_RETURN) /net/tipc/udp_media.c: 162 in tipc_udp_send_msg() 156 struct udp_media_addr *dst = (struct udp_media_addr *)&dest->value; 157 struct udp_media_addr *src = (struct udp_media_addr *)&b->addr.value; 158 struct sk_buff *clone; 159 struct rtable *rt; 160 161 if (skb_headroom(skb) < UDP_MIN_HEADROOM) >>> CID 1338065: Error handling issues (CHECKED_RETURN) >>> Calling "pskb_expand_head" without checking return value (as is done elsewhere 51 out of 56 times). 162 pskb_expand_head(skb, UDP_MIN_HEADROOM, 0, GFP_ATOMIC); 163 164 clone = skb_clone(skb, GFP_ATOMIC); 165 skb_set_inner_protocol(clone, htons(ETH_P_TIPC)); 166 ub = rcu_dereference_rtnl(b->media_ptr); 167 if (!ub) { When expanding buffer headroom over udp tunnel with pskb_expand_head(), it's unfortunate that we don't check its return value. As a result, if the function returns an error code due to the lack of memory, it may cause unpredictable consequence as we unconditionally consider that it's always successful. Fixes: e53567948f82 ("tipc: conditionally expand buffer headroom over udp tunnel") Reported-by: <scan-admin@coverity.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-23tipc: avoid packets leaking on socket receive queueYing Xue1-3/+7
Even if we drain receive queue thoroughly in tipc_release() after tipc socket is removed from rhashtable, it is possible that some packets are in flight because some CPU runs receiver and did rhashtable lookup before we removed socket. They will achieve receive queue, but nobody delete them at all. To avoid this leak, we register a private socket destructor to purge receive queue, meaning releasing packets pending on receive queue will be delayed until the last reference of tipc socket will be released. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20tipc: correct settings of broadcast link stateJon Paul Maloy1-0/+2
Since commit 5266698661401afc5e ("tipc: let broadcast packet reception use new link receive function") the broadcast send link state was meant to always be set to LINK_ESTABLISHED, since we don't need this link to follow the regular link FSM rules. It was also the intention that this state anyway shouldn't impact the run-time working state of the link, since the latter in reality is controlled by the number of registered peers. We have now discovered that this assumption is not quite correct. If the broadcast link is reset because of too many retransmissions, its state will inadvertently go to LINK_RESETTING, and never go back to LINK_ESTABLISHED, because the LINK_FAILURE event was not anticipated. This will work well once, but if it happens a second time, the reset on a link in LINK_RESETTING has has no effect, and neither the broadcast link nor the unicast links will go down as they should. Furthermore, it is confusing that the management tool shows that this link is in UP state when that obviously isn't the case. We now ensure that this state strictly follows the true working state of the link. The state is set to LINK_ESTABLISHED when the number of peers is non-zero, and to LINK_RESET otherwise. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20tipc: eliminate remnants of hungarian notationJon Paul Maloy6-133/+133
The number of variables with Hungarian notation (l_ptr, n_ptr etc.) has been significantly reduced over the last couple of years. We now root out the last traces of this practice. There are no functional changes in this commit. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20tipc: narrow down interface towards struct tipc_linkJon Paul Maloy7-345/+415
We move the definition of struct tipc_link from link.h to link.c in order to minimize its exposure to the rest of the code. When needed, we define new functions to make it possible for external entities to access and set data in the link. Apart from the above, there are no functional changes. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20tipc: narrow down exposure of struct tipc_nodeJon Paul Maloy7-461/+462
In our effort to have less code and include dependencies between entities such as node, link and bearer, we try to narrow down the exposed interface towards the node as much as possible. In this commit, we move the definition of struct tipc_node, along with many of its associated function declarations, from node.h to node.c. We also move some function definitions from link.c and name_distr.c to node.c, since they access fields in struct tipc_node that should not be externally visible. The moved functions are renamed according to new location, and made static whenever possible. There are no functional changes in this commit. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20tipc: convert node lock to rwlockJon Paul Maloy3-133/+136
According to the node FSM a node in state SELF_UP_PEER_UP cannot change state inside a lock context, except when a TUNNEL_PROTOCOL (SYNCH or FAILOVER) packet arrives. However, the node's individual links may still change state. Since each link now is protected by its own spinlock, we finally have the conditions in place to convert the node spinlock to an rwlock_t. If the node state and arriving packet type are rigth, we can let the link directly receive the packet under protection of its own spinlock and the node lock in read mode. In all other cases we use the node lock in write mode. This enables full concurrent execution between parallel links during steady-state traffic situations, i.e., 99+ % of the time. This commit implements this change. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20tipc: introduce per-link spinlockJon Paul Maloy3-26/+25
As a preparation to allow parallel links to work more independently from each other we introduce a per-link spinlock, to be stored in the struct nodes's link entry area. Since the node lock still is a regular spinlock there is no increase in parallellism at this stage. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20tipc: reduce code dependency between binding table and node layerJon Paul Maloy6-67/+74
The file name_distr.c currently contains three functions, named_cluster_distribute(), tipc_publ_subcscribe() and tipc_publ_unsubscribe() that all directly access fields in struct tipc_node. We want to eliminate such dependencies, so we move those functions to the file node.c and rename them to tipc_node_broadcast(), tipc_node_subscribe() and tipc_node_unsubscribe() respectively. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20tipc: small cleanup of function tipc_node_check_state()Jon Paul Maloy1-3/+2
The function tipc_node_check_state() contains the core logics for handling link synchronization and failover. For this reason, it is important to keep it as comprehensible as possible. In this commit, we make three small cleanups. 1) If the node is in state SELF_DOWN_PEER_LEAVING and the received packet confirms that the peer has lost contact, there will be no further action in this function. To make this clearer, we return from the function directly after the state change. 2) Since commit 0f8b8e28fb3241f9fd ("tipc: eliminate risk of stalled link synchronization") only the logically first TUNNEL_PROTO/SYNCH packet can alter the link state and set the synch point, independently of arrival order. Hence, there is not any longer any need to adjust the synch value in case such packets arrive in disorder. We remove this adjustment. 3) It is the intention that any message arriving on any of the links may trig a check for and possible termination of a node SYNCH state. A redundant and unnoticed check for tipc_link_is_synching() obviously beats this purpose, with the effect that only packets arriving on the synching link may currently end the synch state. We remove this check. This change will further shorten the synchronization period between parallel links. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20tipc: move linearization of buffers to generic codeJon Paul Maloy3-5/+3
In commit 5cbb28a4bf65c7e4 ("tipc: linearize arriving NAME_DISTR and LINK_PROTO buffers") we added linearization of NAME_DISTRIBUTOR, LINK_PROTOCOL/RESET and LINK_PROTOCOL/ACTIVATE to the function tipc_udp_recv(). The location of the change was selected in order to make the commit easily appliable to 'net' and 'stable'. We now move this linearization to where it should be done, in the functions tipc_named_rcv() and tipc_link_proto_rcv() respectively. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+5
Minor overlapping changes in net/ipv4/ipmr.c, in 'net' we were fixing the "BH-ness" of the counter bumps whilst in 'net-next' the functions were modified to take an explicit 'net' parameter. Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.