| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Implement the getsockopt SOL_TLS TLS_RX which is currently missing. The
primary usecase is to use it in conjunction with TCP_REPAIR to
checkpoint/restore the TLS record layer state.
TLS connection state usually exists on the user space library. So
basically we can easily extract it from there, but when the TLS
connections are delegated to the kTLS, it is not the case. We need to
have a way to extract the TLS state from the kernel for both of TX and
RX side.
The new TLS_RX getsockopt copies the crypto_info to user in the same
way as TLS_TX does.
We have described use cases in our research work in Netdev 0x14
Transport Workshop [1].
Also, there is an TLS implementation called tlse [2] which supports
TLS connection migration. They have support of kTLS and their code
shows that they are expecting the future support of this option.
[1] https://speakerdeck.com/yutarohayakawa/prism-proxies-without-the-pain
[2] https://github.com/eduardsui/tlse
Signed-off-by: Yutaro Hayakawa <yhayakawa3720@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When MSG_OOB is specified to tls_device_sendpage() the mapped page is
never unmapped.
Hold off mapping the page until after the flags are checked and the page
is actually needed.
Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure")
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Trying to use ktls on a system with 32-bit userspace and 64-bit kernel
results in a EOPNOTSUPP message during sendmsg:
setsockopt(3, SOL_TLS, TLS_TX, …, 40) = 0
sendmsg(3, …, msg_flags=0}, 0) = -1 EOPNOTSUPP (Operation not supported)
The tls_sw implementation does strict flag checking and does not allow
the MSG_CMSG_COMPAT flag, which is set if the message comes in through
the compat syscall.
This patch adds MSG_CMSG_COMPAT to the flag check to allow the usage of
the TLS SW implementation on systems using the compat syscall path.
Note that the same check is present in the sendmsg path for the TLS
device implementation, however the flag hasn't been added there for lack
of testing hardware.
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking updates from David Miller:
1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.
2) Support UDP segmentation in code TSO code, from Eric Dumazet.
3) Allow flashing different flash images in cxgb4 driver, from Vishal
Kulkarni.
4) Add drop frames counter and flow status to tc flower offloading,
from Po Liu.
5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.
6) Various new indirect call avoidance, from Eric Dumazet and Brian
Vazquez.
7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
Yonghong Song.
8) Support querying and setting hardware address of a port function via
devlink, use this in mlx5, from Parav Pandit.
9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.
10) Switch qca8k driver over to phylink, from Jonathan McDowell.
11) In bpftool, show list of processes holding BPF FD references to
maps, programs, links, and btf objects. From Andrii Nakryiko.
12) Several conversions over to generic power management, from Vaibhav
Gupta.
13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
Yakunin.
14) Various https url conversions, from Alexander A. Klimov.
15) Timestamping and PHC support for mscc PHY driver, from Antoine
Tenart.
16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.
17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.
18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.
19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
drivers. From Luc Van Oostenryck.
20) XDP support for xen-netfront, from Denis Kirjanov.
21) Support receive buffer autotuning in MPTCP, from Florian Westphal.
22) Support EF100 chip in sfc driver, from Edward Cree.
23) Add XDP support to mvpp2 driver, from Matteo Croce.
24) Support MPTCP in sock_diag, from Paolo Abeni.
25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
infrastructure, from Jakub Kicinski.
26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.
27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.
28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.
29) Refactor a lot of networking socket option handling code in order to
avoid set_fs() calls, from Christoph Hellwig.
30) Add rfc4884 support to icmp code, from Willem de Bruijn.
31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.
32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.
33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.
34) Support TCP syncookies in MPTCP, from Flowian Westphal.
35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
Brivio.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
net: thunderx: initialize VF's mailbox mutex before first usage
usb: hso: remove bogus check for EINPROGRESS
usb: hso: no complaint about kmalloc failure
hso: fix bailout in error case of probe
ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
selftests/net: relax cpu affinity requirement in msg_zerocopy test
mptcp: be careful on subflow creation
selftests: rtnetlink: make kci_test_encap() return sub-test result
selftests: rtnetlink: correct the final return value for the test
net: dsa: sja1105: use detected device id instead of DT one on mismatch
tipc: set ub->ifindex for local ipv6 address
ipv6: add ipv6_dev_find()
net: openvswitch: silence suspicious RCU usage warning
Revert "vxlan: fix tos value before xmit"
ptp: only allow phase values lower than 1 period
farsync: switch from 'pci_' to 'dma_' API
wan: wanxl: switch from 'pci_' to 'dma_' API
hv_netvsc: do not use VF device if link is down
dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
net: macb: Properly handle phylink on at91sam9x
...
|
|
sockptr_advance never properly worked. Replace it with _offset variants
of copy_from_sockptr and copy_to_sockptr.
Fixes: ba423fdaa589 ("net: add a new sockptr_t type")
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rework the remaining setsockopt code to pass a sockptr_t instead of a
plain user pointer. This removes the last remaining set_fs(KERNEL_DS)
outside of architecture specific code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> [ieee802154]
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.
In preparation for removing[2] the[3] macro[4], remove all remaining
needless uses with the following script:
git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \
xargs perl -pi -e \
's/\buninitialized_var\(([^\)]+)\)/\1/g;
s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;'
drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid
pathological white-space.
No outstanding warnings were found building allmodconfig with GCC 9.3.0
for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64,
alpha, and m68k.
[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/
Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5
Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB
Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers
Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
This patch adds support for asynchronous resynchronization in tls_device.
Async resync follows two distinct stages:
1. The NIC driver indicates that it would like to resync on some TLS
record within the received packet (P), but the driver does not
know (yet) which of the TLS records within the packet.
At this stage, the NIC driver will query the device to find the exact
TCP sequence for resync (tcpsn), however, the driver does not wait
for the device to provide the response.
2. Eventually, the device responds, and the driver provides the tcpsn
within the resync packet to KTLS. Now, KTLS can check the tcpsn against
any processed TLS records within packet P, and also against any record
that is processed in the future within packet P.
The asynchronous resync path simplifies the device driver, as it can
save bits on the packet completion (32-bit TCP sequence), and pass this
information on an asynchronous command instead.
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
This reverts commit b3ae2459f89773adcbf16fef4b68deaaa3be1929.
Revert the force resync API.
Not in use. To be replaced by a better async resync API downstream.
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Pull READ/WRITE_ONCE rework from Will Deacon:
"This the READ_ONCE rework I've been working on for a while, which
bumps the minimum GCC version and improves code-gen on arm64 when
stack protector is enabled"
[ Side note: I'm _really_ tempted to raise the minimum gcc version to
4.9, so that we can just say that we require _Generic() support.
That would allow us to more cleanly handle a lot of the cases where we
depend on very complex macros with 'sizeof' or __builtin_choose_expr()
with __builtin_types_compatible_p() etc.
This branch has a workaround for sparse not handling _Generic(),
either, but that was already fixed in the sparse development branch,
so it's really just gcc-4.9 that we'd require. - Linus ]
* 'rwonce/rework' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux:
compiler_types.h: Use unoptimized __unqual_scalar_typeof for sparse
compiler_types.h: Optimize __unqual_scalar_typeof compilation time
compiler.h: Enforce that READ_ONCE_NOCHECK() access size is sizeof(long)
compiler-types.h: Include naked type in __pick_integer_type() match
READ_ONCE: Fix comment describing 2x32-bit atomicity
gcov: Remove old GCC 3.4 support
arm64: barrier: Use '__unqual_scalar_typeof' for acquire/release macros
locking/barriers: Use '__unqual_scalar_typeof' for load-acquire macros
READ_ONCE: Drop pointer qualifiers when reading from scalar types
READ_ONCE: Enforce atomicity for {READ,WRITE}_ONCE() memory accesses
READ_ONCE: Simplify implementations of {READ,WRITE}_ONCE()
arm64: csum: Disable KASAN for do_csum()
fault_inject: Don't rely on "return value" from WRITE_ONCE()
net: tls: Avoid assigning 'const' pointer to non-const pointer
netfilter: Avoid assigning 'const' pointer to non-const pointer
compiler/gcc: Raise minimum GCC version for kernel builds to 4.8
|
|
KTLS uses a stream parser to collect TLS messages and send them to
the upper layer tls receive handler. This ensures the tls receiver
has a full TLS header to parse when it is run. However, when a
socket has BPF_SK_SKB_STREAM_VERDICT program attached before KTLS
is enabled we end up with two stream parsers running on the same
socket.
The result is both try to run on the same socket. First the KTLS
stream parser runs and calls read_sock() which will tcp_read_sock
which in turn calls tcp_rcv_skb(). This dequeues the skb from the
sk_receive_queue. When this is done KTLS code then data_ready()
callback which because we stacked KTLS on top of the bpf stream
verdict program has been replaced with sk_psock_start_strp(). This
will in turn kick the stream parser again and eventually do the
same thing KTLS did above calling into tcp_rcv_skb() and dequeuing
a skb from the sk_receive_queue.
At this point the data stream is broke. Part of the stream was
handled by the KTLS side some other bytes may have been handled
by the BPF side. Generally this results in either missing data
or more likely a "Bad Message" complaint from the kTLS receive
handler as the BPF program steals some bytes meant to be in a
TLS header and/or the TLS header length is no longer correct.
We've already broke the idealized model where we can stack ULPs
in any order with generic callbacks on the TX side to handle this.
So in this patch we do the same thing but for RX side. We add
a sk_psock_strp_enabled() helper so TLS can learn a BPF verdict
program is running and add a tls_sw_has_ctx_rx() helper so BPF
side can learn there is a TLS ULP on the socket.
Then on BPF side we omit calling our stream parser to avoid
breaking the data stream for the KTLS receiver. Then on the
KTLS side we call BPF_SK_SKB_STREAM_VERDICT once the KTLS
receiver is done with the packet but before it posts the
msg to userspace. This gives us symmetry between the TX and
RX halfs and IMO makes it usable again. On the TX side we
process packets in this order BPF -> TLS -> TCP and on
the receive side in the reverse order TCP -> TLS -> BPF.
Discovered while testing OpenSSL 3.0 Alpha2.0 release.
Fixes: d829e9c4112b5 ("tls: convert to generic sk_msg interface")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/159079361946.5745.605854335665044485.stgit@john-Precision-5820-Tower
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
xdp_umem.c had overlapping changes between the 64-bit math fix
for the calculation of npgs and the removal of the zerocopy
memory type which got rid of the chunk_size_nohdr member.
The mlx5 Kconfig conflict is a case where we just take the
net-next copy of the Kconfig entry dependency as it takes on
the ESWITCH dependency by one level of indirection which is
what the 'net' conflicting change is trying to ensure.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds a field to the tls rx offload context which enables
drivers to force a send_resync call.
This field can be used by drivers to request a resync at the next
possible tls record. It is beneficial for hardware that provides the
resync sequence number asynchronously. In such cases, the packet that
triggered the resync does not contain the information required for a
resync. Instead, the driver requests resync for all the following
TLS record until the asynchronous notification with the resync request
TCP sequence arrives.
A following series for mlx5e ConnectX-6DX TLS RX offload support will
use this mechanism.
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tls_sw_recvmsg() and tls_decrypt_done() can be run concurrently.
// tls_sw_recvmsg()
if (atomic_read(&ctx->decrypt_pending))
crypto_wait_req(-EINPROGRESS, &ctx->async_wait);
else
reinit_completion(&ctx->async_wait.completion);
//tls_decrypt_done()
pending = atomic_dec_return(&ctx->decrypt_pending);
if (!pending && READ_ONCE(ctx->async_notify))
complete(&ctx->async_wait.completion);
Consider the scenario tls_decrypt_done() is about to run complete()
if (!pending && READ_ONCE(ctx->async_notify))
and tls_sw_recvmsg() reads decrypt_pending == 0, does reinit_completion(),
then tls_decrypt_done() runs complete(). This sequence of execution
results in wrong completion. Consequently, for next decrypt request,
it will not wait for completion, eventually on connection close, crypto
resources freed, there is no way to handle pending decrypt response.
This race condition can be avoided by having atomic_read() mutually
exclusive with atomic_dec_return(),complete().Intoduced spin lock to
ensure the mutual exclution.
Addressed similar problem in tx direction.
v1->v2:
- More readable commit message.
- Corrected the lock to fix new race scenario.
- Removed barrier which is not needed now.
Fixes: a42055e8d2c3 ("net/tls: Add support for async encryption of records for performance")
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We cannot free record on any transient error because it leads to
losing previos data. Check socket error to know whether record must
be freed or not.
Fixes: d10523d0b3d7 ("net/tls: free the record on encryption error")
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
bpf_exec_tx_verdict() can return negative value for copied
variable. In that case this value will be pushed back to caller
and the real error code will be lost. Fix it using signed type and
checking for positive value.
Fixes: d10523d0b3d7 ("net/tls: free the record on encryption error")
Fixes: d3b18ad31f93 ("tls: add bpf support to sk_msg handling")
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tls_data_ready() invokes sk_psock_get(), which returns a reference of
the specified sk_psock object to "psock" with increased refcnt.
When tls_data_ready() returns, local variable "psock" becomes invalid,
so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling path of
tls_data_ready(). When "psock->ingress_msg" is empty but "psock" is not
NULL, the function forgets to decrease the refcnt increased by
sk_psock_get(), causing a refcnt leak.
Fix this issue by calling sk_psock_put() on all paths when "psock" is
not NULL.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
bpf_exec_tx_verdict() invokes sk_psock_get(), which returns a reference
of the specified sk_psock object to "psock" with increased refcnt.
When bpf_exec_tx_verdict() returns, local variable "psock" becomes
invalid, so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling path of
bpf_exec_tx_verdict(). When "policy" equals to NULL but "psock" is not
NULL, the function forgets to decrease the refcnt increased by
sk_psock_get(), causing a refcnt leak.
Fix this issue by calling sk_psock_put() on this error path before
bpf_exec_tx_verdict() returns.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tls_build_proto() uses WRITE_ONCE() to assign a 'const' pointer to a
'non-const' pointer. Cleanups to the implementation of WRITE_ONCE() mean
that this will give rise to a compiler warning, just like a plain old
assignment would do:
| net/tls/tls_main.c: In function ‘tls_build_proto’:
| ./include/linux/compiler.h:229:30: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
| net/tls/tls_main.c:640:4: note: in expansion of macro ‘smp_store_release’
| 640 | smp_store_release(&saved_tcpv6_prot, prot);
| | ^~~~~~~~~~~~~~~~~
Drop the const qualifier from the local 'prot' variable, as it isn't
needed.
Cc: Boris Pismenny <borisp@mellanox.com>
Cc: Aviad Yehezkel <aviadye@mellanox.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Building with some experimental patches, I came across a warning
in the tls code:
include/linux/compiler.h:215:30: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
215 | *(volatile typeof(x) *)&(x) = (val); \
| ^
net/tls/tls_main.c:650:4: note: in expansion of macro 'smp_store_release'
650 | smp_store_release(&saved_tcpv4_prot, prot);
This appears to be a legitimate warning about assigning a const pointer
into the non-const 'saved_tcpv4_prot' global. Annotate both the ipv4 and
ipv6 pointers 'const' to make the code internally consistent.
Fixes: 5bb4c45d466c ("net/tls: Read sk_prot once when building tls proto ops")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sockmap performs lockless writes to sk->sk_prot on the following paths:
tcp_bpf_{recvmsg|sendmsg} / sock_map_unref
sk_psock_put
sk_psock_drop
sk_psock_restore_proto
WRITE_ONCE(sk->sk_prot, proto)
To prevent load/store tearing [1], and to make tooling aware of intentional
shared access [2], we need to annotate other sites that access sk_prot with
READ_ONCE/WRITE_ONCE macros.
Change done with Coccinelle with following semantic patch:
@@
expression E;
identifier I;
struct sock *sk;
identifier sk_prot =~ "^sk_prot$";
@@
(
E =
-sk->sk_prot
+READ_ONCE(sk->sk_prot)
|
-sk->sk_prot = E
+WRITE_ONCE(sk->sk_prot, E)
|
-sk->sk_prot
+READ_ONCE(sk->sk_prot)
->I
)
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Apart from being a "tremendous" win when it comes to generated machine
code (see bloat-o-meter output for x86-64 below) this mainly prepares
ground for annotating access to sk_prot with READ_ONCE, so that we don't
pepper the code with access annotations and needlessly repeat loads.
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-46 (-46)
Function old new delta
tls_init 851 805 -46
Total: Before=21063, After=21017, chg -0.22%
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The helper that builds kTLS proto ops doesn't need to and should not modify
the base proto ops. Annotate the parameter as read-only.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-02-21
The following pull-request contains BPF updates for your *net-next* tree.
We've added 25 non-merge commits during the last 4 day(s) which contain
a total of 33 files changed, 2433 insertions(+), 161 deletions(-).
The main changes are:
1) Allow for adding TCP listen sockets into sock_map/hash so they can be used
with reuseport BPF programs, from Jakub Sitnicki.
2) Add a new bpf_program__set_attach_target() helper for adding libbpf support
to specify the tracepoint/function dynamically, from Eelco Chaudron.
3) Add bpf_read_branch_records() BPF helper which helps use cases like profile
guided optimizations, from Daniel Xu.
4) Enable bpf_perf_event_read_value() in all tracing programs, from Song Liu.
5) Relax BTF mandatory check if only used for libbpf itself e.g. to process
BTF defined maps, from Andrii Nakryiko.
6) Move BPF selftests -mcpu compilation attribute from 'probe' to 'v3' as it has
been observed that former fails in envs with low memlock, from Yonghong Song.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sk_msg and ULP frameworks override protocol callbacks pointer in
sk->sk_prot, while tcp accesses it locklessly when cloning the listening
socket, that is with neither sk_lock nor sk_callback_lock held.
Once we enable use of listening sockets with sockmap (and hence sk_msg),
there will be shared access to sk->sk_prot if socket is getting cloned
while being inserted/deleted to/from the sockmap from another CPU:
Read side:
tcp_v4_rcv
sk = __inet_lookup_skb(...)
tcp_check_req(sk)
inet_csk(sk)->icsk_af_ops->syn_recv_sock
tcp_v4_syn_recv_sock
tcp_create_openreq_child
inet_csk_clone_lock
sk_clone_lock
READ_ONCE(sk->sk_prot)
Write side:
sock_map_ops->map_update_elem
sock_map_update_elem
sock_map_update_common
sock_map_link_no_progs
tcp_bpf_init
tcp_bpf_update_sk_prot
sk_psock_update_proto
WRITE_ONCE(sk->sk_prot, ops)
sock_map_ops->map_delete_elem
sock_map_delete_elem
__sock_map_delete
sock_map_unref
sk_psock_put
sk_psock_drop
sk_psock_restore_proto
tcp_update_ulp
WRITE_ONCE(sk->sk_prot, proto)
Mark the shared access with READ_ONCE/WRITE_ONCE annotations.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200218171023.844439-2-jakub@cloudflare.com
|
|
Current code doesn't check if tcp sequence number is starting from (/after)
1st record's start sequnce number. It only checks if seq number is before
1st record's end sequnce number. This problem will always be a possibility
in re-transmit case. If a record which belongs to a requested seq number is
already deleted, tls_get_record will start looking into list and as per the
check it will look if seq number is before the end seq of 1st record, which
will always be true and will return 1st record always, it should in fact
return NULL.
As part of the fix, start looking each record only if the sequence number
lies in the list else return NULL.
There is one more check added, driver look for the start marker record to
handle tcp packets which are before the tls offload start sequence number,
hence return 1st record if the record is tls start marker and seq number is
before the 1st record's starting sequence number.
Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2020-01-15
The following pull-request contains BPF updates for your *net* tree.
We've added 12 non-merge commits during the last 9 day(s) which contain
a total of 13 files changed, 95 insertions(+), 43 deletions(-).
The main changes are:
1) Fix refcount leak for TCP time wait and request sockets for socket lookup
related BPF helpers, from Lorenz Bauer.
2) Fix wrong verification of ARSH instruction under ALU32, from Daniel Borkmann.
3) Batch of several sockmap and related TLS fixes found while operating
more complex BPF programs with Cilium and OpenSSL, from John Fastabend.
4) Fix sockmap to read psock's ingress_msg queue before regular sk_receive_queue()
to avoid purging data upon teardown, from Lingpeng Chen.
5) Fix printing incorrect pointer in bpftool's btf_dump_ptr() in order to properly
dump a BPF map's value with BTF, from Martin KaFai Lau.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When user returns SK_DROP we need to reset the number of copied bytes
to indicate to the user the bytes were dropped and not sent. If we
don't reset the copied arg sendmsg will return as if those bytes were
copied giving the user a positive return value.
This works as expected today except in the case where the user also
pops bytes. In the pop case the sg.size is reduced but we don't correctly
account for this when copied bytes is reset. The popped bytes are not
accounted for and we return a small positive value potentially confusing
the user.
The reason this happens is due to a typo where we do the wrong comparison
when accounting for pop bytes. In this fix notice the if/else is not
needed and that we have a similar problem if we push data except its not
visible to the user because if delta is larger the sg.size we return a
negative value so it appears as an error regardless.
Fixes: 7246d8ed4dcce ("bpf: helper to pop data from messages")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20200111061206.8028-9-john.fastabend@gmail.com
|
|
Its possible through a set of push, pop, apply helper calls to construct
a skmsg, which is just a ring of scatterlist elements, with the start
value larger than the end value. For example,
end start
|_0_|_1_| ... |_n_|_n+1_|
Where end points at 1 and start points and n so that valid elements is
the set {n, n+1, 0, 1}.
Currently, because we don't build the correct chain only {n, n+1} will
be sent. This adds a check and sg_chain call to correctly submit the
above to the crypto and tls send path.
Fixes: d3b18ad31f93d ("tls: add bpf support to sk_msg handling")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20200111061206.8028-8-john.fastabend@gmail.com
|
|
It is possible to build a plaintext buffer using push helper that is larger
than the allocated encrypt buffer. When this record is pushed to crypto
layers this can result in a NULL pointer dereference because the crypto
API expects the encrypt buffer is large enough to fit the plaintext
buffer. Kernel splat below.
To resolve catch the cases this can happen and split the buffer into two
records to send individually. Unfortunately, there is still one case to
handle where the split creates a zero sized buffer. In this case we merge
the buffers and unmark the split. This happens when apply is zero and user
pushed data beyond encrypt buffer. This fixes the original case as well
because the split allocated an encrypt buffer larger than the plaintext
buffer and the merge simply moves the pointers around so we now have
a reference to the new (larger) encrypt buffer.
Perhaps its not ideal but it seems the best solution for a fixes branch
and avoids handling these two cases, (a) apply that needs split and (b)
non apply case. The are edge cases anyways so optimizing them seems not
necessary unless someone wants later in next branches.
[ 306.719107] BUG: kernel NULL pointer dereference, address: 0000000000000008
[...]
[ 306.747260] RIP: 0010:scatterwalk_copychunks+0x12f/0x1b0
[...]
[ 306.770350] Call Trace:
[ 306.770956] scatterwalk_map_and_copy+0x6c/0x80
[ 306.772026] gcm_enc_copy_hash+0x4b/0x50
[ 306.772925] gcm_hash_crypt_remain_continue+0xef/0x110
[ 306.774138] gcm_hash_crypt_continue+0xa1/0xb0
[ 306.775103] ? gcm_hash_crypt_continue+0xa1/0xb0
[ 306.776103] gcm_hash_assoc_remain_continue+0x94/0xa0
[ 306.777170] gcm_hash_assoc_continue+0x9d/0xb0
[ 306.778239] gcm_hash_init_continue+0x8f/0xa0
[ 306.779121] gcm_hash+0x73/0x80
[ 306.779762] gcm_encrypt_continue+0x6d/0x80
[ 306.780582] crypto_gcm_encrypt+0xcb/0xe0
[ 306.781474] crypto_aead_encrypt+0x1f/0x30
[ 306.782353] tls_push_record+0x3b9/0xb20 [tls]
[ 306.783314] ? sk_psock_msg_verdict+0x199/0x300
[ 306.784287] bpf_exec_tx_verdict+0x3f2/0x680 [tls]
[ 306.785357] tls_sw_sendmsg+0x4a3/0x6a0 [tls]
test_sockmap test signature to trigger bug,
[TEST]: (1, 1, 1, sendmsg, pass,redir,start 1,end 2,pop (1,2),ktls,):
Fixes: d3b18ad31f93d ("tls: add bpf support to sk_msg handling")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20200111061206.8028-7-john.fastabend@gmail.com
|
|
When sockmap sock with TLS enabled is removed we cleanup bpf/psock state
and call tcp_update_ulp() to push updates to TLS ULP on top. However, we
don't push the write_space callback up and instead simply overwrite the
op with the psock stored previous op. This may or may not be correct so
to ensure we don't overwrite the TLS write space hook pass this field to
the ULP and have it fixup the ctx.
This completes a previous fix that pushed the ops through to the ULP
but at the time missed doing this for write_space, presumably because
write_space TLS hook was added around the same time.
Fixes: 95fa145479fbc ("bpf: sockmap/tls, close can race with map free")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20200111061206.8028-4-john.fastabend@gmail.com
|
|
Mallesham reports the TLS with async accelerator was broken by
commit d10523d0b3d7 ("net/tls: free the record on encryption error")
because encryption can return -EINPROGRESS in such setups, which
should not be treated as an error.
The error is also present in the BPF path (likely copied from there).
Reported-by: Mallesham Jatharakonda <mallesham.jatharakonda@oneconvergence.com>
Fixes: d3b18ad31f93 ("tls: add bpf support to sk_msg handling")
Fixes: d10523d0b3d7 ("net/tls: free the record on encryption error")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When device loses sync mid way through a record - kernel
has to re-encrypt the part of the record which the device
already decrypted to be able to decrypt and authenticate
the record in its entirety.
The re-encryption piggy backs on the decryption routine,
but obviously because the partially decrypted record can't
be authenticated crypto API returns an error which is then
ignored by tls_device_reencrypt().
Commit 5c5ec6685806 ("net/tls: add TlsDecryptError stat")
added a statistic to count decryption errors, this statistic
can't be incremented when we see the expected re-encryption
error. Move the inc to the caller.
Reported-and-tested-by: David Beckett <david.beckett@netronome.com>
Fixes: 5c5ec6685806 ("net/tls: add TlsDecryptError stat")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is currently no way for driver to reliably check that
the socket it has looked up is in fact RX offloaded. Add
a helper. This allows drivers to catch misbehaving firmware.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ENOTSUPP is not available in userspace, for example:
setsockopt failed, 524, Unknown error 524
Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Partially sent record cleanup path increments an SG entry
directly instead of using sg_next(). This should not be a
problem today, as encrypted messages should be always
allocated as arrays. But given this is a cleanup path it's
easy to miss was this ever to change. Use sg_next(), and
simplify the code.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Looks like when BPF support was added by commit d3b18ad31f93
("tls: add bpf support to sk_msg handling") and
commit d829e9c4112b ("tls: convert to generic sk_msg interface")
it broke/removed the support for in-place crypto as added by
commit 4e6d47206c32 ("tls: Add support for inplace records
encryption").
The inplace_crypto member of struct tls_rec is dead, inited
to zero, and sometimes set to zero again. It used to be
set to 1 when record was allocated, but the skmsg code doesn't
seem to have been written with the idea of in-place crypto
in mind.
Since non trivial effort is required to bring the feature back
and we don't really have the HW to measure the benefit just
remove the left over support for now to avoid confusing readers.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When tls_do_encryption() fails the SG lists are left with the
SG_END and SG_CHAIN marks in place. One could hope that once
encryption fails we will never see the record again, but that
is in fact not true. Commit d3b18ad31f93 ("tls: add bpf support
to sk_msg handling") added special handling to ENOMEM and ENOSPC
errors which mean we may see the same record re-submitted.
As suggested by John free the record, the BPF code is already
doing just that.
Reported-by: syzbot+df0d4ec12332661dd1f9@syzkaller.appspotmail.com
Fixes: d3b18ad31f93 ("tls: add bpf support to sk_msg handling")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
bpf_exec_tx_verdict() may free the record if tls_push_record()
fails, or if the entire record got consumed by BPF. Re-check
ctx->open_rec before touching the data.
Fixes: d3b18ad31f93 ("tls: add bpf support to sk_msg handling")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Minor conflict in drivers/s390/net/qeth_l2_main.c, kept the lock
from commit c8183f548902 ("s390/qeth: fix potential deadlock on
workqueue flush"), removed the code which was removed by commit
9897d583b015 ("s390/qeth: consolidate some duplicated HW cmd code").
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
Bring back tls_sw_sendpage_locked. sk_msg redirection into a socket
with TLS_TX takes the following path:
tcp_bpf_sendmsg_redir
tcp_bpf_push_locked
tcp_bpf_push
kernel_sendpage_locked
sock->ops->sendpage_locked
Also update the flags test in tls_sw_sendpage_locked to allow flag
MSG_NO_SHARED_FRAGS. bpf_tcp_sendmsg sets this.
Link: https://lore.kernel.org/netdev/CA+FuTSdaAawmZ2N8nfDDKu3XLpXBbMtcCT0q4FntDD2gn8ASUw@mail.gmail.com/T/#t
Link: https://github.com/wdebruij/kerneltools/commits/icept.2
Fixes: 0608c69c9a80 ("bpf: sk_msg, sock{map|hash} redirect through ULP")
Fixes: f3de19af0f5b ("Revert \"net/tls: remove unused function tls_sw_sendpage_locked\"")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If PROC_FS is not set, gcc warning this:
net/tls/tls_proc.c:23:12: warning:
'tls_statistics_seq_show' defined but not used [-Wunused-function]
Use #ifdef to guard this.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
One conflict in the BPF samples Makefile, some fixes in 'net' whilst
we were converting over to Makefile.target rules in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
TLS TX needs to release and re-acquire the socket lock if send buffer
fills up.
TLS SW TX path currently depends on only allowing one thread to enter
the function by the abuse of sk_write_pending. If another writer is
already waiting for memory no new ones are allowed in.
This has two problems:
- writers don't wake other threads up when they leave the kernel;
meaning that this scheme works for single extra thread (second
application thread or delayed work) because memory becoming
available will send a wake up request, but as Mallesham and
Pooja report with larger number of threads it leads to threads
being put to sleep indefinitely;
- the delayed work does not get _scheduled_ but it may _run_ when
other writers are present leading to crashes as writers don't
expect state to change under their feet (same records get pushed
and freed multiple times); it's hard to reliably bail from the
work, however, because the mere presence of a writer does not
guarantee that the writer will push pending records before exiting.
Ensuring wakeups always happen will make the code basically open
code a mutex. Just use a mutex.
The TLS HW TX path does not have any locking (not even the
sk_write_pending hack), yet it uses a per-socket sg_tx_data
array to push records.
Fixes: a42055e8d2c3 ("net/tls: Add support for async encryption of records for performance")
Reported-by: Mallesham Jatharakonda <mallesh537@gmail.com>
Reported-by: Pooja Trivedi <poojatrivedi@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sk_write_pending being not zero does not guarantee that partial
record will be pushed. If the thread waiting for memory times out
the pending record may get stuck.
In case of tls_device there is no path where parial record is
set and writer present in the first place. Partial record is
set only in tls_push_sg() and tls_push_sg() will return an
error immediately. All tls_device callers of tls_push_sg()
will return (and not wait for memory) if it failed.
Fixes: a42055e8d2c3 ("net/tls: Add support for async encryption of records for performance")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use a single bit instead of boolean to remember if packet
was already decrypted.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Store async_capable on a single bit instead of a full integer
to save space.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Avoid unnecessary pointer chasing and calculations, callers already
have most of the state tls_device_decrypted() needs.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
Yutaro Hayakawa
Ira Weiny
Rouven Czerwinski
Linus Torvalds
Christoph Hellwig
Kees Cook
Boris Pismenny
Masahiro Yamada
John Fastabend
David S. Miller
Tariq Toukan
Vinay Kumar Yadav
Vadim Fedorenko
Xiyu Yang
Will Deacon
Arnd Bergmann
Jakub Sitnicki
Rohit Maheshwari
Jakub Kicinski
Valentin Vidic
Willem de Bruijn
YueHaibing