aboutsummaryrefslogtreecommitdiffstats
path: root/net/x25/Kconfig (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2018-11-20crypto: remove useless initializations of cra_listEric Biggers11-25/+0
Some algorithms initialize their .cra_list prior to registration. But this is unnecessary since crypto_register_alg() will overwrite .cra_list when adding the algorithm to the 'crypto_alg_list'. Apparently the useless assignment has just been copy+pasted around. So, remove the useless assignments. Exception: paes_s390.c uses cra_list to check whether the algorithm is registered or not, so I left that as-is for now. This patch shouldn't change any actual behavior. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-20crypto: inside-secure - remove useless setting of type flagsEric Biggers1-4/+4
Remove the unnecessary setting of CRYPTO_ALG_TYPE_SKCIPHER. Commit 2c95e6d97892 ("crypto: skcipher - remove useless setting of type flags") took care of this everywhere else, but a few more instances made it into the tree at about the same time. Squash them before they get copy+pasted around again. This patch shouldn't change any actual behavior. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-16crypto: ecc - regularize scalar for scalar multiplicationVitaly Chikunov1-4/+12
ecc_point_mult is supposed to be used with a regularized scalar, otherwise, it's possible to deduce the position of the top bit of the scalar with timing attack. This is important when the scalar is a private key. ecc_point_mult is already using a regular algorithm (i.e. having an operation flow independent of the input scalar) but regularization step is not implemented. Arrange scalar to always have fixed top bit by adding a multiple of the curve order (n). References: The constant time regularization step is based on micro-ecc by Kenneth MacKay and also referenced in the literature (Bernstein, D. J., & Lange, T. (2017). Montgomery curves and the Montgomery ladder. (Cryptology ePrint Archive; Vol. 2017/293). s.l.: IACR. Chapter 4.6.2.) Signed-off-by: Vitaly Chikunov <vt@altlinux.org> Cc: kernel-hardening@lists.openwall.com Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-16crypto: x86/chacha20 - Add a 4-block AVX2 variantMartin Willi2-0/+317
This variant builds upon the idea of the 2-block AVX2 variant that shuffles words after each round. The shuffling has a rather high latency, so the arithmetic units are not optimally used. Given that we have plenty of registers in AVX, this version parallelizes the 2-block variant to do four blocks. While the first two blocks are shuffling, the CPU can do the XORing on the second two blocks and vice-versa, which makes this version much faster than the SSSE3 variant for four blocks. The latter is now mostly for systems that do not have AVX2, but there it is the work-horse, so we keep it in place. The partial XORing function trailer is very similar to the AVX2 2-block variant. While it could be shared, that code segment is rather short; profiling is also easier with the trailer integrated, so we keep it per function. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-16crypto: x86/chacha20 - Add a 2-block AVX2 variantMartin Willi2-0/+204
This variant uses the same principle as the single block SSSE3 variant by shuffling the state matrix after each round. With the wider AVX registers, we can do two blocks in parallel, though. This function can increase performance and efficiency significantly for lengths that would otherwise require a 4-block function. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-16crypto: x86/chacha20 - Use larger block functions more aggressivelyMartin Willi1-15/+24
Now that all block functions support partial lengths, engage the wider block sizes more aggressively. This prevents using smaller block functions multiple times, where the next larger block function would have been faster. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-16crypto: x86/chacha20 - Support partial lengths in 8-block AVX2 variantMartin Willi2-61/+133
Add a length argument to the eight block function for AVX2, so the block function may XOR only a partial length of eight blocks. To avoid unnecessary operations, we integrate XORing of the first four blocks in the final lane interleaving; this also avoids some work in the partial lengths path. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-16crypto: x86/chacha20 - Support partial lengths in 4-block SSSE3 variantMartin Willi2-40/+128
Add a length argument to the quad block function for SSSE3, so the block function may XOR only a partial length of four blocks. As we already have the stack set up, the partial XORing does not need to. This gives a slightly different function trailer, so we keep that separate from the 1-block function. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-16crypto: x86/chacha20 - Support partial lengths in 1-block SSSE3 variantMartin Willi2-22/+63
Add a length argument to the single block function for SSSE3, so the block function may XOR only a partial length of the full block. Given that the setup code is rather cheap, the function does not process more than one block; this allows us to keep the block function selection in the C glue code. The required branching does not negatively affect performance for full block sizes. The partial XORing uses simple "rep movsb" to copy the data before and after doing XOR in SSE. This is rather efficient on modern processors; movsw can be slightly faster, but the additional complexity is probably not worth it. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-16hwrng: bcm2835 - Switch to SPDX identifierStefan Wahren1-5/+2
Adopt the SPDX license identifier headers to ease license compliance management. While we are at this fix the comment style, too. Cc: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Eric Anholt <eric@anholt.net> Acked-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-16padata: clean an indentation issue, remove extraneous spaceColin Ian King1-1/+1
Trivial fix to clean up an indentation issue Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-16crypto: caam/qi2 - add support for Chacha20 + Poly1305Horia Geantă4-6/+154
Add support for Chacha20 + Poly1305 combined AEAD: -generic (rfc7539) -IPsec (rfc7634 - known as rfc7539esp in the kernel) Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-16crypto: caam/jr - add support for Chacha20 + Poly1305Horia Geantă6-5/+354
Add support for Chacha20 + Poly1305 combined AEAD: -generic (rfc7539) -IPsec (rfc7634 - known as rfc7539esp in the kernel) Signed-off-by: Cristian Stoica <cristian.stoica@nxp.com> Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-16crypto: chacha20poly1305 - export CHACHAPOLY_IV_SIZECristian Stoica2-2/+1
Move CHACHAPOLY_IV_SIZE to header file, so it can be reused. Signed-off-by: Cristian Stoica <cristian.stoica@nxp.com> Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-16crypto: caam/qi2 - add support for ChaCha20Horia Geantă4-4/+36
Add support for ChaCha20 skcipher algorithm. Signed-off-by: Carmen Iorga <carmen.iorga@nxp.com> Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-16crypto: caam - add register map changes cf. Era 10Horia Geantă8-49/+184
Era 10 changes the register map. The updates that affect the drivers: -new version registers are added -DBG_DBG[deco_state] field is moved to a new register - DBG_EXEC[19:16] @ 8_0E3Ch. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-16crypto: mxs-dcp - Add support for dcp clkLeonard Crestez1-3/+25
On 6ull and 6sll the DCP block has a clock which needs to be explicitly enabled. Add minimal handling for this at probe/remove time. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-16dt-bindings: crypto: Mention clocks for mxs-dcpLeonard Crestez1-0/+2
Explicit clock enabling is required on 6sll and 6ull so mention that standard clock bindings are used. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-16crypto: streebog - add Streebog test vectorsVitaly Chikunov3-1/+179
Add testmgr and tcrypt tests and vectors for Streebog hash function from RFC 6986 and GOST R 34.11-2012, for HMAC-Streebog vectors are from RFC 7836 and R 50.1.113-2016. Cc: linux-integrity@vger.kernel.org Signed-off-by: Vitaly Chikunov <vt@altlinux.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-16crypto: streebog - register Streebog in hash info for IMAVitaly Chikunov3-0/+7
Register Streebog hash function in Hash Info arrays to let IMA use it for its purposes. Cc: linux-integrity@vger.kernel.org Signed-off-by: Vitaly Chikunov <vt@altlinux.org> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-16crypto: streebog - add Streebog hash functionVitaly Chikunov4-0/+1187
Add GOST/IETF Streebog hash function (GOST R 34.11-2012, RFC 6986) generic hash transformation. Cc: linux-integrity@vger.kernel.org Signed-off-by: Vitaly Chikunov <vt@altlinux.org> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-16crypto: aes-ce - Remove duplicate headerBrajeswar Ghosh1-1/+0
Remove asm/hwcap.h which is included more than once Signed-off-by: Brajeswar Ghosh <brajeswar.linux@gmail.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-16crypto: bcm - fix normal/non key hash algorithm failureRaveendra Padasalagi1-1/+5
Remove setkey() callback handler for normal/non key hash algorithms and keep it for AES-CBC/CMAC which needs key. Fixes: 9d12ba86f818 ("crypto: brcm - Add Broadcom SPU driver") Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-16crypto: cts - document NIST standard statusGilad Ben-Yossef1-2/+5
cts(cbc(aes)) as used in the kernel has been added to NIST standard as CBC-CS3. Document it as such. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Suggested-by: Stephan Mueller <smueller@chronox.de> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-16crypto: ecc - check for invalid values in the key verification testVitaly Chikunov1-16/+26
Currently used scalar multiplication algorithm (Matthieu Rivain, 2011) have invalid values for scalar == 1, n-1, and for regularized version n-2, which was previously not checked. Verify that they are not used as private keys. Signed-off-by: Vitaly Chikunov <vt@altlinux.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-09crypto: testmgr - mark cts(cbc(aes)) as FIPS allowedGilad Ben-Yossef1-0/+1
As per Sp800-38A addendum from Oct 2010[1], cts(cbc(aes)) is allowed as a FIPS mode algorithm. Mark it as such. [1] https://csrc.nist.gov/publications/detail/sp/800-38a/addendum/final Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Reviewed-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-09crypto: user - clean up report structure copyingEric Biggers13-199/+96
There have been a pretty ridiculous number of issues with initializing the report structures that are copied to userspace by NETLINK_CRYPTO. Commit 4473710df1f8 ("crypto: user - Prepare for CRYPTO_MAX_ALG_NAME expansion") replaced some strncpy()s with strlcpy()s, thereby introducing information leaks. Later two other people tried to replace other strncpy()s with strlcpy() too, which would have introduced even more information leaks: - https://lore.kernel.org/patchwork/patch/954991/ - https://patchwork.kernel.org/patch/10434351/ Commit cac5818c25d0 ("crypto: user - Implement a generic crypto statistics") also uses the buggy strlcpy() approach and therefore leaks uninitialized memory to userspace. A fix was proposed, but it was originally incomplete. Seeing as how apparently no one can get this right with the current approach, change all the reporting functions to: - Start by memsetting the report structure to 0. This guarantees it's always initialized, regardless of what happens later. - Initialize all strings using strscpy(). This is safe after the memset, ensures null termination of long strings, avoids unnecessary work, and avoids the -Wstringop-truncation warnings from gcc. - Use sizeof(var) instead of sizeof(type). This is more robust against copy+paste errors. For simplicity, also reuse the -EMSGSIZE return value from nla_put(). Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-09crypto: user - remove redundant reporting functionsEric Biggers1-59/+0
The acomp, akcipher, and kpp algorithm types already have .report methods defined, so there's no need to duplicate this functionality in crypto_user itself; the duplicate functions are actually never executed. Remove the unused code. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-09crypto: chelsio - clean up various indentation issuesColin Ian King1-8/+8
Trivial fix to clean up varous indentation issue Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-09pcrypt: use format specifier in kobject_addColin Ian King1-1/+1
Passing string 'name' as the format specifier is potentially hazardous because name could (although very unlikely to) have a format specifier embedded in it causing issues when parsing the non-existent arguments to these. Follow best practice by using the "%s" format string for the string 'name'. Cleans up clang warning: crypto/pcrypt.c:397:40: warning: format string is not a string literal (potentially insecure) [-Wformat-security] Fixes: a3fb1e330dd2 ("pcrypt: Added sysfs interface to pcrypt") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-09crypto: testmgr - add AES-CFB testsDmitry Eremin-Solenikov3-0/+88
Add AES128/192/256-CFB testvectors from NIST SP800-38A. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-09crypto: cfb - fix decryptionDmitry Eremin-Solenikov1-1/+1
crypto_cfb_decrypt_segment() incorrectly XOR'ed generated keystream with IV, rather than with data stream, resulting in incorrect decryption. Test vectors will be added in the next patch. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-09crypto: cavium/nitrox - fix a DMA pool free failureWenwen Wang3-10/+31
In crypto_alloc_context(), a DMA pool is allocated through dma_pool_alloc() to hold the crypto context. The meta data of the DMA pool, including the pool used for the allocation 'ndev->ctx_pool' and the base address of the DMA pool used by the device 'dma', are then stored to the beginning of the pool. These meta data are eventually used in crypto_free_context() to free the DMA pool through dma_pool_free(). However, given that the DMA pool can also be accessed by the device, a malicious device can modify these meta data, especially when the device is controlled to deploy an attack. This can cause an unexpected DMA pool free failure. To avoid the above issue, this patch introduces a new structure crypto_ctx_hdr and a new field chdr in the structure nitrox_crypto_ctx hold the meta data information of the DMA pool after the allocation. Note that the original structure ctx_hdr is not changed to ensure the compatibility. Cc: <stable@vger.kernel.org> Signed-off-by: Wenwen Wang <wang6495@umn.edu> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-09crypto: ccree - add SM3 supportYael Chemla4-24/+113
Add support for SM3 cipher in CryptoCell 713. Signed-off-by: Yael Chemla <yael.chemla@foss.arm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-09crypto: ccree - modify set_cipher_mode usage from cc_hashYael Chemla2-9/+23
encapsulate set_cipher_mode call with another api, preparation for specific hash behavior as needed in later patches when SM3 introduced. Signed-off-by: Yael Chemla <yael.chemla@foss.arm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-09crypto: ccree - adjust hash length to suit certain context specificsYael Chemla4-24/+47
Adjust hash length such that it will not be fixed and general for all algs. Instead make it suitable for certain context information. This is preparation for SM3 support. Signed-off-by: Yael Chemla <yael.chemla@foss.arm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-09crypto: ccree - add SM4 supportGilad Ben-Yossef3-0/+70
Add support for SM4 cipher in CryptoCell 713. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-09dt-bindings: crypto: ccree: add ccree 713Gilad Ben-Yossef1-2/+5
Add device tree bindings associating Arm TrustZone CryptoCell 713 with the ccree driver. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-09crypto: ccree - add support for CryptoCell 713Gilad Ben-Yossef3-11/+19
Add support for Arm TrustZone CryptoCell 713. Note that this patch just enables using a 713 in backwards compatible mode to 712. Newer 713 specific features will follow. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-09crypto: arm/aes - add some hardening against cache-timing attacksEric Biggers3-14/+66
Make the ARM scalar AES implementation closer to constant-time by disabling interrupts and prefetching the tables into L1 cache. This is feasible because due to ARM's "free" rotations, the main tables are only 1024 bytes instead of the usual 4096 used by most AES implementations. On ARM Cortex-A7, the speed loss is only about 5%. The resulting code is still over twice as fast as aes_ti.c. Responsiveness is potentially a concern, but interrupts are only disabled for a single AES block. Note that even after these changes, the implementation still isn't necessarily guaranteed to be constant-time; see https://cr.yp.to/antiforgery/cachetiming-20050414.pdf for a discussion of the many difficulties involved in writing truly constant-time AES software. But it's valuable to make such attacks more difficult. Much of this patch is based on patches suggested by Ard Biesheuvel. Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-09crypto: aes_ti - disable interrupts while accessing S-boxEric Biggers2-1/+20
In the "aes-fixed-time" AES implementation, disable interrupts while accessing the S-box, in order to make cache-timing attacks more difficult. Previously it was possible for the CPU to be interrupted while the S-box was loaded into L1 cache, potentially evicting the cachelines and causing later table lookups to be time-variant. In tests I did on x86 and ARM, this doesn't affect performance significantly. Responsiveness is potentially a concern, but interrupts are only disabled for a single AES block. Note that even after this change, the implementation still isn't necessarily guaranteed to be constant-time; see https://cr.yp.to/antiforgery/cachetiming-20050414.pdf for a discussion of the many difficulties involved in writing truly constant-time AES software. But it's valuable to make such attacks more difficult. Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-09crypto: user - Zeroize whole structure given to user spaceCorentin Labbe1-0/+21
For preventing uninitialized data to be given to user-space (and so leak potential useful data), the crypto_stat structure must be correctly initialized. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: cac5818c25d0 ("crypto: user - Implement a generic crypto statistics") Signed-off-by: Corentin Labbe <clabbe@baylibre.com> [EB: also fix it in crypto_reportstat_one()] [EB: use sizeof(var) rather than sizeof(type)] Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-09crypto: user - fix leaking uninitialized memory to userspaceEric Biggers1-9/+9
All bytes of the NETLINK_CRYPTO report structures must be initialized, since they are copied to userspace. The change from strncpy() to strlcpy() broke this. As a minimal fix, change it back. Fixes: 4473710df1f8 ("crypto: user - Prepare for CRYPTO_MAX_ALG_NAME expansion") Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-09crypto: simd - correctly take reqsize of wrapped skcipher into accountArd Biesheuvel1-2/+3
The simd wrapper's skcipher request context structure consists of a single subrequest whose size is taken from the subordinate skcipher. However, in simd_skcipher_init(), the reqsize that is retrieved is not from the subordinate skcipher but from the cryptd request structure, whose size is completely unrelated to the actual wrapped skcipher. Reported-by: Qian Cai <cai@gmx.us> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Qian Cai <cai@gmx.us> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-09crypto: hisilicon - Fix reference after free of memories on error pathJohn Garry1-10/+11
coccicheck currently warns of the following issues in the driver: drivers/crypto/hisilicon/sec/sec_algs.c:864:51-66: ERROR: reference preceded by free on line 812 drivers/crypto/hisilicon/sec/sec_algs.c:864:40-49: ERROR: reference preceded by free on line 813 drivers/crypto/hisilicon/sec/sec_algs.c:861:8-24: ERROR: reference preceded by free on line 814 drivers/crypto/hisilicon/sec/sec_algs.c:860:41-51: ERROR: reference preceded by free on line 815 drivers/crypto/hisilicon/sec/sec_algs.c:867:7-18: ERROR: reference preceded by free on line 816 It would appear than on certain error paths that we may attempt reference- after-free some memories. This patch fixes those issues. The solution doesn't look perfect, but having same memories free'd possibly from separate functions makes it tricky. Fixes: 915e4e8413da ("crypto: hisilicon - SEC security accelerator driver") Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-09crypto: hisilicon - Fix NULL dereference for same dst and srcJohn Garry1-4/+6
When the source and destination addresses for the cipher are the same, we will get a NULL dereference from accessing the split destination scatterlist memories, as shown: [ 56.565719] tcrypt: [ 56.565719] testing speed of async ecb(aes) (hisi_sec_aes_ecb) encryption [ 56.574683] tcrypt: test 0 (128 bit key, 16 byte blocks): [ 56.587585] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 56.596361] Mem abort info: [ 56.599151] ESR = 0x96000006 [ 56.602196] Exception class = DABT (current EL), IL = 32 bits [ 56.608105] SET = 0, FnV = 0 [ 56.611149] EA = 0, S1PTW = 0 [ 56.614280] Data abort info: [ 56.617151] ISV = 0, ISS = 0x00000006 [ 56.620976] CM = 0, WnR = 0 [ 56.623930] user pgtable: 4k pages, 48-bit VAs, pgdp = (____ptrval____) [ 56.630533] [0000000000000000] pgd=0000041fc7e4d003, pud=0000041fcd9bf003, pmd=0000000000000000 [ 56.639224] Internal error: Oops: 96000006 [#1] PREEMPT SMP [ 56.644782] Modules linked in: tcrypt(+) [ 56.648695] CPU: 21 PID: 2326 Comm: insmod Tainted: G W 4.19.0-rc6-00001-g3fabfb8-dirty #716 [ 56.658420] Hardware name: Huawei Taishan 2280 /D05, BIOS Hisilicon D05 IT17 Nemo 2.0 RC0 10/05/2018 [ 56.667537] pstate: 20000005 (nzCv daif -PAN -UAO) [ 56.672322] pc : sec_alg_skcipher_crypto+0x318/0x748 [ 56.677274] lr : sec_alg_skcipher_crypto+0x178/0x748 [ 56.682224] sp : ffff0000118e3840 [ 56.685525] x29: ffff0000118e3840 x28: ffff841fbb3f8118 [ 56.690825] x27: 0000000000000000 x26: 0000000000000000 [ 56.696125] x25: ffff841fbb3f8080 x24: ffff841fbadc0018 [ 56.701425] x23: ffff000009119000 x22: ffff841fbb24e280 [ 56.706724] x21: ffff841ff212e780 x20: ffff841ff212e700 [ 56.712023] x19: 0000000000000001 x18: ffffffffffffffff [ 56.717322] x17: 0000000000000000 x16: 0000000000000000 [ 56.722621] x15: ffff0000091196c8 x14: 72635f7265687069 [ 56.727920] x13: 636b735f676c615f x12: ffff000009119940 [ 56.733219] x11: 0000000000000000 x10: 00000000006080c0 [ 56.738519] x9 : 0000000000000000 x8 : ffff841fbb24e480 [ 56.743818] x7 : ffff841fbb24e500 x6 : ffff841ff00cdcc0 [ 56.749117] x5 : 0000000000000010 x4 : 0000000000000000 [ 56.754416] x3 : ffff841fbb24e380 x2 : ffff841fbb24e480 [ 56.759715] x1 : 0000000000000000 x0 : ffff000008f682c8 [ 56.765016] Process insmod (pid: 2326, stack limit = 0x(____ptrval____)) [ 56.771702] Call trace: [ 56.774136] sec_alg_skcipher_crypto+0x318/0x748 [ 56.778740] sec_alg_skcipher_encrypt+0x10/0x18 [ 56.783259] test_skcipher_speed+0x2a0/0x700 [tcrypt] [ 56.788298] do_test+0x18f8/0x48c8 [tcrypt] [ 56.792469] tcrypt_mod_init+0x60/0x1000 [tcrypt] [ 56.797161] do_one_initcall+0x5c/0x178 [ 56.800985] do_init_module+0x58/0x1b4 [ 56.804721] load_module+0x1da4/0x2150 [ 56.808456] __se_sys_init_module+0x14c/0x1e8 [ 56.812799] __arm64_sys_init_module+0x18/0x20 [ 56.817231] el0_svc_common+0x60/0xe8 [ 56.820880] el0_svc_handler+0x2c/0x80 [ 56.824615] el0_svc+0x8/0xc [ 56.827483] Code: a94c87a3 910b2000 f87b7842 f9004ba2 (b87b7821) [ 56.833564] ---[ end trace 0f63290590e93d94 ]--- Segmentation fault Fix this by only accessing these memories when we have different src and dst. Fixes: 915e4e8413da ("crypto: hisilicon - SEC security accelerator driver") Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-04Linux 4.20-rc1Linus Torvalds1-2/+2
2018-11-04sched/topology: Fix off by one bugPeter Zijlstra1-1/+1
With the addition of the NUMA identity level, we increased @level by one and will run off the end of the array in the distance sort loop. Fixed: 051f3ca02e46 ("sched/topology: Introduce NUMA identity node sched domain") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-11-03memory_hotplug: cond_resched in __remove_pagesMichal Hocko1-0/+1
We have received a bug report that unbinding a large pmem (>1TB) can result in a soft lockup: NMI watchdog: BUG: soft lockup - CPU#9 stuck for 23s! [ndctl:4365] [...] Supported: Yes CPU: 9 PID: 4365 Comm: ndctl Not tainted 4.12.14-94.40-default #1 SLE12-SP4 Hardware name: Intel Corporation S2600WFD/S2600WFD, BIOS SE5C620.86B.01.00.0833.051120182255 05/11/2018 task: ffff9cce7d4410c0 task.stack: ffffbe9eb1bc4000 RIP: 0010:__put_page+0x62/0x80 Call Trace: devm_memremap_pages_release+0x152/0x260 release_nodes+0x18d/0x1d0 device_release_driver_internal+0x160/0x210 unbind_store+0xb3/0xe0 kernfs_fop_write+0x102/0x180 __vfs_write+0x26/0x150 vfs_write+0xad/0x1a0 SyS_write+0x42/0x90 do_syscall_64+0x74/0x150 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x7fd13166b3d0 It has been reported on an older (4.12) kernel but the current upstream code doesn't cond_resched in the hot remove code at all and the given range to remove might be really large. Fix the issue by calling cond_resched once per memory section. Link: http://lkml.kernel.org/r/20181031125840.23982-1-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Thumshirn <jthumshirn@suse.de> Cc: Dan Williams <dan.j.williams@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-03bfs: add sanity check at bfs_fill_super()Tetsuo Handa1-3/+6
syzbot is reporting too large memory allocation at bfs_fill_super() [1]. Since file system image is corrupted such that bfs_sb->s_start == 0, bfs_fill_super() is trying to allocate 8MB of continuous memory. Fix this by adding a sanity check on bfs_sb->s_start, __GFP_NOWARN and printf(). [1] https://syzkaller.appspot.com/bug?id=16a87c236b951351374a84c8a32f40edbc034e96 Link: http://lkml.kernel.org/r/1525862104-3407-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by: syzbot <syzbot+71c6b5d68e91149fc8a4@syzkaller.appspotmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Tigran Aivazian <aivazian.tigran@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.