aboutsummaryrefslogtreecommitdiffstats
path: root/net/xdp/xsk.c (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2019-09-06ravb: TROCR register is only present on R-Car Gen3Simon Horman2-3/+5
Only use the TROCR register on R-Car Gen3 as it is not present on other SoCs. Offsets used for the undocumented registers are considered reserved and should not be written to. After some internal investigation with Renesas it remains unclear why this driver accesses these fields on R-Car Gen2 but regardless of what the historical reasons are the current code is considered incorrect. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-06ravb: remove undocumented endianness selectionSimon Horman2-7/+0
This patch removes the use of the undocumented BOC bit of the CCC register. Current documentation for EtherAVB (ravb) describes the offset of what the driver uses as the BOC bit as reserved and that only a value of 0 should be written. After some internal investigation with Renesas it remains unclear why this driver accesses these fields but regardless of what the historical reasons are the current code is considered incorrect. Based on work by Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-06ravb: remove undocumented counter processingSimon Horman2-13/+0
This patch removes the use of the undocumented counter registers CDCR, LCCR, CERCR, CEECR. Offsets used for undocumented registers are considered reserved and should not be written to. After some internal investigation with Renesas it remains unclear why this driver accesses these fields but regardless of what the historical reasons are the current code is considered incorrect. Based on work by Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-06ravb: correct typo in FBP field of SFO registerSimon Horman1-1/+1
The field name is FBP rather than FPB. This field is unused and could equally be removed from the driver entirely. But there seems no harm in leaving as documentation of the presence of the field. Based on work by Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-06net: hns3: make hclge_dbg_get_m7_stats_info staticGuojia Liao1-1/+1
hclge_dbg_get_m7_info is used only in the hclge_debugfs.c, so it should be declared with static. Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-06net: hns3: disable loopback setting in hclge_mac_initYufeng Mo1-1/+33
If the selftest and reset are performed at the same time, the loopback setting may be still in the enable state after the reset. As a result, packets cannot be sent out. This patch fixes this issue by disabling loopback in hclge_mac_init. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-06net: hns3: remove explicit conversion to boolGuojia Liao1-1/+1
Relational and logical operators evaluate to bool, explicit conversion is overly verbose and unnecessary. Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-06net: hns3: add client node validity judgmentPeng Li1-0/+16
HNS3 driver can only unregister client which included in hnae3_client_list. This patch adds the client node validity judgment. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-06net: hns3: fix mis-assignment to hdev->reset_level in hclge_resetHuazhong Tan1-4/+5
Since hclge_get_reset_level may return HNAE3_NONE_RESET, so hdev->reset_level can not be assigned with the return value in the hclge_reset(), otherwise, it will cause the use of hdev->reset_level in hclge_reset_event get into error. Fixes: 012fcb52f67c ("net: hns3: activate reset timer when calling reset_event") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-06net: hns3: fix double free bug when setting ringparamHuazhong Tan1-1/+3
The system will panic when change the ringparam in HNS3 drivers: [ 1459.627727] hns3 0000:bd:00.0 eth6: Changing Tx/Rx ring ds from 1024/1024 to 24/24 [ 1459.635766] hns3 0000:bd:00.0 eth6: link down [ 1459.640788] BUG: Bad page state in process ethtool pfn:203f75c18 [ 1459.646940] page:ffff7ee4ffd70600 refcount:0 mapcount:0 mapping:ffff993fff40f400 index:0x0 compound_mapcount: 0 [ 1459.656987] flags: 0x9fffe00000010200(slab|head) [ 1459.661591] raw: 9fffe00000010200 dead000000000100 dead000000000122 ffff993fff40f400 [ 1459.669302] raw: 0000000000000000 0000000080100010 00000000ffffffff 0000000000000000 [ 1459.677016] page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set [ 1459.683432] bad because of flags: 0x200(slab) [ 1459.687775] Modules linked in: ib_ipoib ib_umad rpcrdma ib_iser libiscsi scsi_transport_iscsi hns_roce_hw_v2 crct10dif_ce hns3 ses hclge hnae3 hisi_hpre hisi_zip qm uacce ip_tables x_tables hisi_sas_v3_hw hisi_sas_main libsas scsi_transport_sas [ 1459.709329] CPU: 14 PID: 17244 Comm: ethtool Tainted: G O 5.3.0-rc4-00415-gc86f057 #1 [ 1459.718419] Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V3.B040.01 07/26/2019 [ 1459.727248] Call trace: [ 1459.729688] dump_backtrace+0x0/0x150 [ 1459.733335] show_stack+0x24/0x30 [ 1459.736639] dump_stack+0xa0/0xc4 [ 1459.739943] bad_page+0xf0/0x158 [ 1459.743157] free_pages_check_bad+0x84/0xa0 [ 1459.747322] __free_pages_ok+0x348/0x378 [ 1459.751228] page_frag_free+0x80/0x88 [ 1459.754877] skb_free_head+0x38/0x48 [ 1459.758436] skb_release_data+0x134/0x160 [ 1459.762427] skb_release_all+0x30/0x40 [ 1459.766158] consume_skb+0x38/0x108 [ 1459.769633] __dev_kfree_skb_any+0x58/0x68 [ 1459.773718] hns3_fini_ring+0x48/0x58 [hns3] [ 1459.777970] hns3_set_ringparam+0x2a8/0x418 [hns3] [ 1459.782741] dev_ethtool+0x5f4/0x2080 [ 1459.786390] dev_ioctl+0x190/0x3d8 [ 1459.789777] sock_do_ioctl+0xf8/0x220 [ 1459.793423] sock_ioctl+0x3bc/0x490 [ 1459.796896] do_vfs_ioctl+0xc4/0x868 [ 1459.800454] ksys_ioctl+0x8c/0xa0 [ 1459.803752] __arm64_sys_ioctl+0x28/0x38 [ 1459.807658] el0_svc_common.constprop.0+0xe0/0x1e0 [ 1459.812426] el0_svc_handler+0x34/0x90 [ 1459.816158] el0_svc+0x10/0x14 [ 1459.819220] Disabling lock debugging due to kernel taint [ 1459.825182] ------------[ cut here ]------------ Since ndo_stop will reclaim the RX's skb allocated by the driver, so the backed up ring parameter should not keep this info. Fixes: a723fb8efe29 ("net: hns3: refine for set ring parameters") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-06net: hns3: fix error VF index when setting VLAN offloadJian Shen1-4/+10
In original codes, the VF index used incorrectly in function hclge_set_vlan_rx_offload_cfg() and hclge_set_vlan_rx_offload_cfg(). When VF id is greater than 8, for example 9, it will set the same bit with VF id 1. This patch fixes it by using vport->vport_id % HCLGE_VF_NUM_PER_CMD / HCLGE_VF_NUM_PER_BYTE as the array index, instead of vport->vport_id / HCLGE_VF_NUM_PER_CMD. Fixes: 052ece6dc19c ("net: hns3: add ethtool related offload command") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-06stmmac: platform: adjust messages and move to dev levelAndy Shevchenko1-9/+13
This patch amends the error and warning messages across the platform driver. It includes the following changes: - append \n to the end of messages - change pr_* macros to dev_* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-06net: phy: Do not check Link status when loopback is enabledJose Abreu1-0/+6
While running stmmac selftests I found that in my 1G setup some tests were failling when running with PHY loopback enabled. It looks like when loopback is enabled the PHY will report that Link is down even though there is a valid connection. As in loopback mode the data will not be sent anywhere we can bypass the logic of checking if Link is valid thus saving unecessary reads. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-06net_sched: act_police: add 2 new attributes to support police 64bit rate and peakrateDavid Dai2-4/+25
For high speed adapter like Mellanox CX-5 card, it can reach upto 100 Gbits per second bandwidth. Currently htb already supports 64bit rate in tc utility. However police action rate and peakrate are still limited to 32bit value (upto 32 Gbits per second). Add 2 new attributes TCA_POLICE_RATE64 and TCA_POLICE_RATE64 in kernel for 64bit support so that tc utility can use them for 64bit rate and peakrate value to break the 32bit limit, and still keep the backward binary compatibility. Tested-by: David Dai <zdai@linux.vnet.ibm.com> Signed-off-by: David Dai <zdai@linux.vnet.ibm.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-06net: openvswitch: Set OvS recirc_id from tc chain indexPaul Blakey8-5/+95
Offloaded OvS datapath rules are translated one to one to tc rules, for example the following simplified OvS rule: recirc_id(0),in_port(dev1),eth_type(0x0800),ct_state(-trk) actions:ct(),recirc(2) Will be translated to the following tc rule: $ tc filter add dev dev1 ingress \ prio 1 chain 0 proto ip \ flower tcp ct_state -trk \ action ct pipe \ action goto chain 2 Received packets will first travel though tc, and if they aren't stolen by it, like in the above rule, they will continue to OvS datapath. Since we already did some actions (action ct in this case) which might modify the packets, and updated action stats, we would like to continue the proccessing with the correct recirc_id in OvS (here recirc_id(2)) where we left off. To support this, introduce a new skb extension for tc, which will be used for translating tc chain to ovs recirc_id to handle these miss cases. Last tc chain index will be set by tc goto chain action and read by OvS datapath. Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-06nfp: Drop unnecessary continue in nfp_net_pf_alloc_vnicszhong jiang1-3/+1
Continue is not needed at the bottom of a loop. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05xsk: lock the control mutex in sock_diag interfaceBjörn Töpel1-0/+3
When accessing the members of an XDP socket, the control mutex should be held. This commit fixes that. Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Fixes: a36b38aa2af6 ("xsk: add sock_diag interface for AF_XDP") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-09-05xsk: use state member for socket synchronizationBjörn Töpel1-15/+39
Prior the state variable was introduced by Ilya, the dev member was used to determine whether the socket was bound or not. However, when dev was read, proper SMP barriers and READ_ONCE were missing. In order to address the missing barriers and READ_ONCE, we start using the state variable as a point of synchronization. The state member read/write is paired with proper SMP barriers, and from this follows that the members described above does not need READ_ONCE if used in conjunction with state check. In all syscalls and the xsk_rcv path we check if state is XSK_BOUND. If that is the case we do a SMP read barrier, and this implies that the dev, umem and all rings are correctly setup. Note that no READ_ONCE are needed for these variable if used when state is XSK_BOUND (plus the read barrier). To summarize: The members struct xdp_sock members dev, queue_id, umem, fq, cq, tx, rx, and state were read lock-less, with incorrect barriers and missing {READ, WRITE}_ONCE. Now, umem, fq, cq, tx, rx, and state are read lock-less. When these members are updated, WRITE_ONCE is used. When read, READ_ONCE are only used when read outside the control mutex (e.g. mmap) or, not synchronized with the state member (XSK_BOUND plus smp_rmb()) Note that dev and queue_id do not need a WRITE_ONCE or READ_ONCE, due to the introduce state synchronization (XSK_BOUND plus smp_rmb()). Introducing the state check also fixes a race, found by syzcaller, in xsk_poll() where umem could be accessed when stale. Suggested-by: Hillf Danton <hdanton@sina.com> Reported-by: syzbot+c82697e3043781e08802@syzkaller.appspotmail.com Fixes: 77cd0d7b3f25 ("xsk: add support for need_wakeup flag in AF_XDP rings") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-09-05xsk: avoid store-tearing when assigning umemBjörn Töpel1-2/+2
The umem member of struct xdp_sock is read outside of the control mutex, in the mmap implementation, and needs a WRITE_ONCE to avoid potential store-tearing. Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Fixes: 423f38329d26 ("xsk: add umem fill queue support and mmap") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-09-05xsk: avoid store-tearing when assigning queuesBjörn Töpel1-1/+1
Use WRITE_ONCE when doing the store of tx, rx, fq, and cq, to avoid potential store-tearing. These members are read outside of the control mutex in the mmap implementation. Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Fixes: 37b076933a8e ("xsk: add missing write- and data-dependency barrier") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-09-05selftests/bpf: precision tracking testsAlexei Starovoitov1-0/+52
Add two tests to check that stack slot marking during backtracking doesn't trigger 'spi > allocated_stack' warning. One test is using BPF_ST insn. Another is using BPF_STX. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-09-05ixgbe: fix xdp handle calculationsKevin Laatz1-3/+4
Currently, we don't add headroom to the handle in ixgbe_zca_free, ixgbe_alloc_buffer_slow_zc and ixgbe_alloc_buffer_zc. The addition of the headroom to the handle was removed in commit d8c3061e5edd ("ixgbe: modify driver for handling offsets"), which will break things when headroom isvnon-zero. This patch fixes this and uses xsk_umem_adjust_offset to add it appropritely based on the mode being run. Fixes: d8c3061e5edd ("ixgbe: modify driver for handling offsets") Reported-by: Bjorn Topel <bjorn.topel@intel.com> Signed-off-by: Kevin Laatz <kevin.laatz@intel.com> Acked-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-09-05i40e: fix xdp handle calculationsKevin Laatz1-3/+4
Currently, we don't add headroom to the handle in i40e_zca_free, i40e_alloc_buffer_slow_zc and i40e_alloc_buffer_zc. The addition of the headroom to the handle was removed in commit 2f86c806a8a8 ("i40e: modify driver for handling offsets"), which will break things when headroom is non-zero. This patch fixes this and uses xsk_umem_adjust_offset to add it appropritely based on the mode being run. Fixes: 2f86c806a8a8 ("i40e: modify driver for handling offsets") Reported-by: Bjorn Topel <bjorn.topel@intel.com> Signed-off-by: Kevin Laatz <kevin.laatz@intel.com> Acked-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-09-05r8152: adjust the settings of ups flagsHayes Wang1-88/+120
The UPS feature only works for runtime suspend, so UPS flags only need to be set before enabling runtime suspend. Therefore, I create a struct to record relative information, and use it before runtime suspend. All chips could record such information, even though not all of them support the feature of UPS. Then, some functions could be combined. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05net: hns: Move static keyword to the front of declarationKrzysztof Wilczynski1-1/+1
Move the static keyword to the front of declaration of g_dsaf_mode_match, and resolve the following compiler warning that can be seen when building with warnings enabled (W=1): drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c:27:1: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05net: qed: Move static keyword to the front of declarationKrzysztof Wilczynski1-1/+1
Move the static keyword to the front of declaration of iwarp_state_names, and resolve the following compiler warning that can be seen when building with warnings enabled (W=1): drivers/net/ethernet/qlogic/qed/qed_iwarp.c:385:1: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] Also, resolve checkpatch.pl script warning: WARNING: static const char * array should probably be static const char * const Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Acked-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05pppoatm: use %*ph to print small bufferAndy Shevchenko1-3/+1
Use %*ph format to print small buffer as hex string. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05net: phy: gmii2rgmii: Dont use priv field in phy deviceHarini Katakam1-2/+2
Use set/get drv data in phydev's mdio device instead. Phy device priv field maybe used by the external phy driver and should not be overwritten. Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05include: mdio: Add driver data helpersHarini Katakam1-0/+11
Add set/get drv_data helpers for mdio device. Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05gianfar: use DT more consistently when selecting PHY connection typeArseny Solokha1-10/+9
Historically, gianfar only used phy-connection-type DT property when connected to PHY in the rgmii-id mode. It ignored the property otherwise, relying on the connection type auto-detection carried out by MAC and providing that reconstructed mode to of_phy_connect(). It also did not consider alternative phy-mode property at all. Make the driver properly query DT node for PHY connection type first and use an obtained value if it was specified there. Otherwise, if a particular DT relies on connection type auto-detection, fall back to reconstructing the value from MAC registers, as before. Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05gianfar: cleanup gianfar.hArseny Solokha1-38/+0
Remove now unused macro and structure definitions from gianfar.h that have accumulated there over time. Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05gianfar: make five functions staticArseny Solokha1-5/+6
Make functions that do not have callers outside the translation unit they are defined in static. Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05gianfar: remove forward declarationsArseny Solokha3-1408/+1347
Remove forward declarations of various static functions located in two driver implementation files and rearrange the corresponding definitions accordingly. This patch only introduces mechanical changes, namely it removes forward declarations and moves function definitions around; it does not change any functionality. Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05net: stmmac: selftests: Add Jumbo Frame testsJose Abreu1-3/+62
Add a test to validate the Jumbo Frame support in stmmac in single channel and multichannel mode. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05net: stmmac: xgmac: Enable RX Jumbo frame supportJose Abreu2-12/+2
We are already doing it by default in the TX path so we can also enable Jumbo Frame support in the RX path independently of MTU value. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05net: stmmac: Correctly assing MAX MTU in XGMAC cores caseJose Abreu1-3/+3
Maximum MTU for XGMAC cores is 16k thus the check for presence of XGMAC shall be done first in order to assign correct value. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05net: stmmac: xgmac: Correct RAVSEL field interpretationJose Abreu1-1/+1
RAVSEL means that only RX side is available for AVB features. As we use both TX and RX features we need to check if RAVSEL is selected and disable AVB if only RX side is available. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05net: stmmac: ethtool: Let user configure TX coalesce without RIWTJose Abreu1-12/+9
When RX Watchdog is disabled its currently not possible to configure TX coalesce settings. Let user configure it anyway. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05net: stmmac: Only consider RX error when HW Timestamping is not enabledJose Abreu1-1/+2
Only consider that we have an error when HW Timestamping is not enabled as this can give false positives due to the fact the RX Timestamping in XGMAC and GMAC cores comes from context descriptors. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05net: stmmac: selftests: Implement the ARP Offload testJose Abreu1-0/+110
Implement a test for ARP Offload feature. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05net: stmmac: xgmac: Implement ARP OffloadJose Abreu4-0/+22
Implement the ARP Offload feature in XGMAC cores. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05net: stmmac: selftests: Add selftest for L3/L4 FiltersJose Abreu1-1/+285
Adds the selftests for L3 and L4 filters with DA/SA/DP/SP support. Changes from v1: - Reduce stack usage (kbuild test robot) Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05net: stmmac: Implement L3/L4 Filters using TC FlowerJose Abreu8-2/+488
Implement filters for Layer 3 and Layer 4 using TC Flower API. Add the corresponding callbacks in XGMAC core. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05net: stmmac: Do not return error code in TC InitializationJose Abreu1-1/+2
As we can still use the remaining TC callbacks, e.g. CBS. We should not fail in the initialization only because RX Parser is not available. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05net: stmmac: xgmac: Add RBU handling in DMA interruptJose Abreu1-0/+4
Add the handling of Receive Buffer Unavailable interrupt in the DMA handler of XGMAC cores. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05net: stmmac: selftests: Return proper error code to userspaceJose Abreu1-11/+11
We can do better than just return 1 to userspace. Lets return a proper Linux error code. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05rocker: add missing init_net check in FIB notifierJiri Pirko1-0/+3
Take only FIB events that are happening in init_net into account. No other namespaces are supported. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05net: mpoa: Use kzfree rather than its implementation.zhong jiang1-4/+2
Use kzfree instead of memset() + kfree(). Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05sunrpc: Use kzfree rather than its implementation.zhong jiang1-6/+3
Use kzfree instead of memset() + kfree(). Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05ixgbe: Use kzfree() rather than its implementation.zhong jiang1-6/+3
Use kzfree() instead of memset() + kfree(). Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.