| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
If IPv6 is builtin, we do not need an expensive indirect call
to reach icmp6_send().
v2: put inline keyword before the type to avoid sparse warnings.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for queue action to steer Rx traffic
hitting the flows to specified Rxq.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support to fetch the requested ethtool n-tuple filters by
translating them from hardware spec to ethtool n-tuple spec.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support to delete ethtool n-tuple filter. Fetch the appropriate
filter region (HPFILTER, HASH, NORMAL) in which the filter exists,
and delete it from the respective region, accordingly.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support to parse and insert ethtool n-tuple filters.
Translate n-tuple spec to flow spec and use the existing tc-flower
offload infra to insert ethtool n-tuple filters.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Allocate and manage resources required for ethtool n-tuple filters.
Also fetch the HASH filter region size and calculate nhash entries.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds a drop frames counter to tc flower offloading.
Reporting h/w dropped frames is necessary for some actions.
Some actions like police action and the coming introduced stream gate
action would produce dropped frames which is necessary for user. Status
update shows how many filtered packets increasing and how many dropped
in those packets.
v2: Changes
- Update commit comments suggest by Jiri Pirko.
Signed-off-by: Po Liu <Po.Liu@nxp.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds support to dump flash memory via
ethtool --get-dump
Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update set_flash to flash boot cfg image to flash region
Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update set_flash to flash boot image to flash region
Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update set_flash to flash PHY image to flash region
Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Chelsio adapter contains different flash regions and each
region is used by different binary files. This patch adds
support to flash images like PHY firmware, boot and boot config
using ethtool -f N.
The N value mapping is as follows.
N = 0 : Parse image and decide which region to flash
N = 1 : Firmware
N = 2 : PHY firmware
N = 3 : boot image
N = 4 : boot cfg
Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>"
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Note that like TCP, we do not support additional encapsulations,
and that checksums must be offloaded to the NIC.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add tlen field into struct tso_t, and change tso_start()
to return skb_transport_offset(skb) + tso->tlen
This removes from callers the need to use tcp_hdrlen(skb) and
will ease UDP segmentation offload addition.
v2: calls tso_start() earlier in otx2_sq_append_tso() [Jakub]
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
skb argument of tso_count_descs(), tso_build_hdr() and tso_build_data() can be const.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
size field can be an int, no need for size_t
Removes a 32bit hole on 64bit kernels.
And align fields for better readability.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Transport header size could be 60 bytes, and network header
size can also be 60 bytes. Add the Ethernet header and we
are above 128 bytes.
Since drivers using net/core/tso.c usually allocates
one DMA coherent piece of memory per TX queue, this patch
might cause issues if a driver was using too many slots.
For 1024 slots, we would need 256 KB of physically
contiguous memory instead of 128 KB.
Alternative fix would be to add checks in the fast path,
but this involves more work in all drivers using net/core/tso.c.
Fixes: f9cbe9a556af ("net: define the TSO header size in net/tso.h")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We need to increase TSO_HEADER_SIZE from 128 to 256.
Since otx2_sq_init() calls qmem_alloc() with TSO_HEADER_SIZE,
we need to change (struct qmem)->entry_sz to avoid truncation to 0.
Fixes: 7a37245ef23f ("octeontx2-af: NPA block admin queue init")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Right now they are empty functions for our SoC since hardware can keep
cache coherent, but it is still good to align with streaming DMA APIs
as device drivers should not make an assumption of SoC.
Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
disable_irq() after request_irq() is still risk as there is a chance irq
can come after request_irq() and before disable_irq().
this should be done by IRQ_NOAUTOEN flag.
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is for improving the readability.
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move the type of buffer address from unsigned char to void
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
since we are using device-managed function, it is unnecessary
to free in probe.
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
This code was detected with the help of Coccinelle and, audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If a valid mac address is present in dt, use that before using
CSR's or a random mac address.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
So far we can not configure irq coalescing when link is down. Allow the
user to do this, and assume that he wants to configure irq coalescing
for highest speed. Otherwise the irq rate is low enough anyway.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Relevant chip clocks are disabled in rtl_pll_power_down(), therefore
move calling clk_disable_unprepare() there. Similar for enabling the
clock.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Counters are updated whenever we go down, therefore move the call to
rtl8169_down().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
rtl8169_hw_reset() meanwhile does more than a hw reset, therefore rename
it to rtl8169_cleanup(). In addition move calling napi_disable() to this
function.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
rtl8169_hw_reset() may be called under RTNL lock, therefore switch to
synchronize_net().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the following scenario WoL isn't configured properly:
- Driver is loaded, interface isn't brought up within 10s, so driver
runtime-suspends.
- WoL is set.
- Interface is brought up, stored WoL setting isn't applied.
It has always been like that, but the scenario seems to be quite
theoretical as I haven't seen any bug report yet. Therefore treat
the change as an improvement.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since 9d3679fe0f30 ("r8169: inline rtl8169_make_unusable_by_asic")
this constant isn't used any longer, so remove it.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In case of problems it facilitates the bug analysis if we know whether
DASH is active. Therefore emit a message in probe if this is the case.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
This code was detected with the help of Coccinelle and, audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Whenever a buggy NAPI driver returns more than its budget,
we emit a stack trace that is of no use, since it does not
tell which driver is buggy.
Instead, emit a message giving the function name, and a
descriptive message.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
This code was detected with the help of Coccinelle and, audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use array_size() helper instead of the open-coded version in
copy_to_user(). These sorts of multiplication factors need to
be wrapped in array_size().
This issue was found with the help of Coccinelle and, audited and fixed
manually.
Addresses-KSPP-ID: https://github.com/KSPP/linux/issues/83
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use vzalloc/vzalloc_node instead of the vmalloc/vzalloc_node and memset.
Also, notice that vzalloc_node() function has no 2-factor argument form
to calculate the size for the allocation, so multiplication factors need
to be wrapped in array_size().
This issue was found with the help of Coccinelle and, audited and fixed
manually.
Addresses-KSPP-ID: https://github.com/KSPP/linux/issues/83
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, updating binding table (add service binding to
name table/withdraw a service binding) is being sent over replicast.
However, if we are scaling up clusters to > 100 nodes/containers this
method is less affection because of looping through nodes in a cluster one
by one.
It is worth to use broadcast to update a binding service. This way, the
binding table can be updated on all peer nodes in one shot.
Broadcast is used when all peer nodes, as indicated by a new capability
flag TIPC_NAMED_BCAST, support reception of this message type.
Four problems need to be considered when introducing this feature.
1) When establishing a link to a new peer node we still update this by a
unicast 'bulk' update. This may lead to race conditions, where a later
broadcast publication/withdrawal bypass the 'bulk', resulting in
disordered publications, or even that a withdrawal may arrive before the
corresponding publication. We solve this by adding an 'is_last_bulk' bit
in the last bulk messages so that it can be distinguished from all other
messages. Only when this message has arrived do we open up for reception
of broadcast publications/withdrawals.
2) When a first legacy node is added to the cluster all distribution
will switch over to use the legacy 'replicast' method, while the
opposite happens when the last legacy node leaves the cluster. This
entails another risk of message disordering that has to be handled. We
solve this by adding a sequence number to the broadcast/replicast
messages, so that disordering can be discovered and corrected. Note
however that we don't need to consider potential message loss or
duplication at this protocol level.
3) Bulk messages don't contain any sequence numbers, and will always
arrive in order. Hence we must exempt those from the sequence number
control and deliver them unconditionally. We solve this by adding a new
'is_bulk' bit in those messages so that they can be recognized.
4) Legacy messages, which don't contain any new bits or sequence
numbers, but neither can arrive out of order, also need to be exempt
from the initial synchronization and sequence number check, and
delivered unconditionally. Therefore, we add another 'is_not_legacy' bit
to all new messages so that those can be distinguished from legacy
messages and the latter delivered directly.
v1->v2:
- fix warning issue reported by kbuild test robot <lkp@intel.com>
- add santiy check to drop the publication message with a sequence
number that is lower than the agreed synch point
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hoang Huu Le <hoang.h.le@dektech.com.au>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove SH-5 documentation index entries following the removal
of SH-5 source code.
Error: Cannot open file ../arch/sh/mm/tlb-sh5.c
Error: Cannot open file ../arch/sh/mm/tlb-sh5.c
Error: Cannot open file ../arch/sh/include/asm/tlb_64.h
Error: Cannot open file ../arch/sh/include/asm/tlb_64.h
Fixes: 3b69e8b45711 ("Merge tag 'sh-for-5.8' of git://git.libc.org/linux-sh")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Rich Felker <dalias@libc.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: ysato@users.sourceforge.jp
Cc: linux-sh@vger.kernel.org
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The purgatory Makefile removes -fstack-protector options if they were
configured in, but does not currently add -fno-stack-protector.
If gcc was configured with the --enable-default-ssp configure option,
this results in the stack protector still being enabled for the
purgatory (absent distro-specific specs files that might disable it
again for freestanding compilations), if the main kernel is being
compiled with stack protection enabled (if it's disabled for the main
kernel, the top-level Makefile will add -fno-stack-protector).
This will break the build since commit
e4160b2e4b02 ("x86/purgatory: Fail the build if purgatory.ro has missing symbols")
and prior to that would have caused runtime failure when trying to use
kexec.
Explicitly add -fno-stack-protector to avoid this, as done in other
Makefiles that need to disable the stack protector.
Reported-by: Gabriel C <nix.or.die@googlemail.com>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The CONFIG_PM_SLEEP #ifdef checks in this file are inconsistent,
leading to a warning about sometimes unused function:
drivers/net/ethernet/intel/e1000e/netdev.c:137:13: error: unused function 'e1000e_check_me' [-Werror,-Wunused-function]
Rather than adding more #ifdefs, just remove them completely
and mark the PM functions as __maybe_unused to let the compiler
work it out on it own.
Fixes: e086ba2fccda ("e1000e: disable s0ix entry and exit flows for ME systems")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
With legacy PM hooks, it was the responsibility of a driver to manage PCI
states and also the device's power state. The generic approach is to let PCI
core handle the work.
e1000_suspend() calls __e1000_shutdown() to perform intermediate tasks.
__e1000_shutdown() modifies the value of "wake" (device should be wakeup
enabled or not), responsible for controlling the flow of legacy PM.
Since, PCI core has no idea about the value of "wake", new code for generic
PM may produce unexpected results. Thus, use "device_set_wakeup_enable()"
to wakeup-enable the device accordingly.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Currently the system will be woken up via WOL(Wake On LAN) even if the
device wakeup ability has been disabled via sysfs:
cat /sys/devices/pci0000:00/0000:00:1f.6/power/wakeup
disabled
The system should not be woken up if the user has explicitly
disabled the wake up ability for this device.
This patch clears the WOL ability of this network device if the
user has disabled the wake up ability in sysfs.
Fixes: bc7f75fa9788 ("[E1000E]: New pci-express e1000 driver")
Reported-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Without a MODULE_DEVICE_TABLE the attributes are missing that create
an alias for auto-loading the module in userspace via hotplug.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix AFS's silly rename by the following means:
(1) Set the destination directory in afs_do_silly_rename() so as to avoid
misbehaviour and indicate that the directory data version will
increment by 1 so as to avoid warnings about unexpected changes in the
DV. Also indicate that the ctime should be updated to avoid xfstest
grumbling.
(2) Note when the server indicates that a directory changed more than we
expected (AFS_OPERATION_DIR_CONFLICT), indicating a conflict with a
third party change, checking on successful completion of unlink and
rename.
The problem is that the FS.RemoveFile RPC op doesn't report the status
of the unlinked file, though YFS.RemoveFile2 does. This can be
mitigated by the assumption that if the directory DV cranked by
exactly 1, we can be sure we removed one link from the file; further,
ordinarily in AFS, files cannot be hardlinked across directories, so
if we reduce nlink to 0, the file is deleted.
However, if the directory DV jumps by more than 1, we cannot know if a
third party intervened by adding or removing a link on the file we
just removed a link from.
The same also goes for any vnode that is at the destination of the
FS.Rename RPC op.
(3) Make afs_vnode_commit_status() apply the nlink drop inside the cb_lock
section along with the other attribute updates if ->op_unlinked is set
on the descriptor for the appropriate vnode.
(4) Issue a follow up status fetch to the unlinked file in the event of a
third party conflict that makes it impossible for us to know if we
actually deleted the file or not.
(5) Provide a flag, AFS_VNODE_SILLY_DELETED, to make afs_getattr() lie to
the user about the nlink of a silly deleted file so that it appears as
0, not 1.
Found with the generic/035 and generic/084 xfstests.
Fixes: e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
The port's headroom buffers are used to store packets while they
traverse the device's pipeline and also to store packets that are egress
mirrored.
On Spectrum-3, ports with eight lanes use two headroom buffers between
which the configured headroom size is split.
In order to prevent packet loss, multiply the calculated headroom size
by two for 8x ports.
Fixes: da382875c616 ("mlxsw: spectrum: Extend to support Spectrum-3 ASIC")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Code to initialize the conf structure while gathering the configuration
of the device was missing.
Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Signed-off-by: Martin <martin.varghese@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The remove function does not destroy all
BM Pools when per cpu pool is active.
When reloading the mvpp2 as a module the BM Pools
are still active in hardware and due to the bug
have twice the size now old + new.
This eventually leads to a kernel crash.
v2:
* add Fixes tag
Fixes: 7d04b0b13b11 ("mvpp2: percpu buffers")
Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Back in 2013, we made a change that broke fast retransmit
for non SACK flows.
Indeed, for these flows, a sender needs to receive three duplicate
ACK before starting fast retransmit. Sending ACK with different
receive window do not count.
Even if enabling SACK is strongly recommended these days,
there still are some cases where it has to be disabled.
Not increasing the window seems better than having to
rely on RTO.
After the fix, following packetdrill test gives :
// Initialize connection
0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0 bind(3, ..., ...) = 0
+0 listen(3, 1) = 0
+0 < S 0:0(0) win 32792 <mss 1000,nop,wscale 7>
+0 > S. 0:0(0) ack 1 <mss 1460,nop,wscale 8>
+0 < . 1:1(0) ack 1 win 514
+0 accept(3, ..., ...) = 4
+0 < . 1:1001(1000) ack 1 win 514
// Quick ack
+0 > . 1:1(0) ack 1001 win 264
+0 < . 2001:3001(1000) ack 1 win 514
// DUPACK : Normally we should not change the window
+0 > . 1:1(0) ack 1001 win 264
+0 < . 3001:4001(1000) ack 1 win 514
// DUPACK : Normally we should not change the window
+0 > . 1:1(0) ack 1001 win 264
+0 < . 4001:5001(1000) ack 1 win 514
// DUPACK : Normally we should not change the window
+0 > . 1:1(0) ack 1001 win 264
+0 < . 1001:2001(1000) ack 1 win 514
// Hole is repaired.
+0 > . 1:1(0) ack 5001 win 272
Fixes: 4e4f1fc22681 ("tcp: properly increase rcv_ssthresh for ofo packets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
Eric Dumazet
Vishal Kulkarni
Po Liu
Barry Song
Gustavo A. R. Silva
Tim Harvey
Heiner Kallweit
Hoang Huu Le
Randy Dunlap
Arvind Sankar
Arnd Bergmann
Vaibhav Gupta
Chen Yu
David Howells
Ido Schimmel
Martin
Sven Auhagen