aboutsummaryrefslogtreecommitdiffstats
path: root/net (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-02-21sctp: Fix port hash table size computationNeil Horman1-8/+38
Dmitry Vyukov noted recently that the sctp_port_hashtable had an error in its size computation, observing that the current method never guaranteed that the hashsize (measured in number of entries) would be a power of two, which the input hash function for that table requires. The root cause of the problem is that two values need to be computed (one, the allocation order of the storage requries, as passed to __get_free_pages, and two the number of entries for the hash table). Both need to be ^2, but for different reasons, and the existing code is simply computing one order value, and using it as the basis for both, which is wrong (i.e. it assumes that ((1<<order)*PAGE_SIZE)/sizeof(bucket) is still ^2 when its not). To fix this, we change the logic slightly. We start by computing a goal allocation order (which is limited by the maximum size hash table we want to support. Then we attempt to allocate that size table, decreasing the order until a successful allocation is made. Then, with the resultant successful order we compute the number of buckets that hash table supports, which we then round down to the nearest power of two, giving us the number of entries the table actually supports. I've tested this locally here, using non-debug and spinlock-debug kernels, and the number of entries in the hashtable consistently work out to be powers of two in all cases. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> CC: Dmitry Vyukov <dvyukov@google.com> CC: Vladislav Yasevich <vyasevich@gmail.com> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-19af_unix: Don't use continue to re-execute unix_stream_read_generic loopRainer Weikusat1-1/+2
The unix_stream_read_generic function tries to use a continue statement to restart the receive loop after waiting for a message. This may not work as intended as the caller might use a recvmsg call to peek at control messages without specifying a message buffer. If this was the case, the continue will cause the function to return without an error and without the credential information if the function had to wait for a message while it had returned with the credentials otherwise. Change to using goto to restart the loop without checking the condition first in this case so that credentials are returned either way. Signed-off-by: Rainer Weikusat <rweikusat@mobileactivedefense.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-19unix_diag: fix incorrect sign extension in unix_lookup_by_inoDmitry V. Levin1-1/+1
The value passed by unix_diag_get_exact to unix_lookup_by_ino has type __u32, but unix_lookup_by_ino's argument ino has type int, which is not a problem yet. However, when ino is compared with sock_i_ino return value of type unsigned long, ino is sign extended to signed long, and this results to incorrect comparison on 64-bit architectures for inode numbers greater than INT_MAX. This bug was found by strace test suite. Fixes: 5d3cae8bc39d ("unix_diag: Dumping exact socket core") Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-19lwt: fix rx checksum setting for lwt devices tunneling over ipv6Paolo Abeni1-1/+1
the commit 35e2d1152b22 ("tunnels: Allow IPv6 UDP checksums to be correctly controlled.") changed the default xmit checksum setting for lwt vxlan/geneve ipv6 tunnels, so that now the checksum is not set into external UDP header. This commit changes the rx checksum setting for both lwt vxlan/geneve devices created by openvswitch accordingly, so that lwt over ipv6 tunnel pairs are again able to communicate with default values. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Jiri Benc <jbenc@redhat.com> Acked-by: Jesse Gross <jesse@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-19tipc: unlock in error pathInsu Yun1-1/+3
tipc_bcast_unlock need to be unlocked in error path. Signed-off-by: Insu Yun <wuninsu@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-19Merge tag 'batman-adv-fix-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller3-5/+33
Antonio Quartulli says: ==================== Two of the fixes included in this patchset prevent wrong memory access - it was triggered when removing an object from a list after it was already free'd due to bad reference counting. This misbehaviour existed for both the gw_node and the orig_node_vlan object and has been fixed by Sven Eckelmann. The last patch fixes our interface feasibility check and prevents it from looping indefinitely when two net_device objects reference each other via iflink index (i.e. veth pair), by Andrew Lunn ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-19rtnl: RTM_GETNETCONF: fix wrong return valueAnton Protopopov2-2/+2
An error response from a RTM_GETNETCONF request can return the positive error value EINVAL in the struct nlmsgerr that can mislead userspace. Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-19net: make netdev_for_each_lower_dev safe for device removalNikolay Aleksandrov1-2/+2
When I used netdev_for_each_lower_dev in commit bad531623253 ("vrf: remove slave queue and private slave struct") I thought that it acts like netdev_for_each_lower_private and can be used to remove the current device from the list while walking, but unfortunately it acts more like netdev_for_each_lower_private_rcu and doesn't allow it. The difference is where the "iter" points to, right now it points to the current element and that makes it impossible to remove it. Change the logic to be similar to netdev_for_each_lower_private and make it point to the "next" element so we can safely delete the current one. VRF is the only such user right now, there's no change for the read-only users. Here's what can happen now: [98423.249858] general protection fault: 0000 [#1] SMP [98423.250175] Modules linked in: vrf bridge(O) stp llc nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace sunrpc crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel jitterentropy_rng sha256_generic hmac drbg ppdev aesni_intel aes_x86_64 glue_helper lrw gf128mul ablk_helper cryptd evdev serio_raw pcspkr virtio_balloon parport_pc parport i2c_piix4 i2c_core virtio_console acpi_cpufreq button 9pnet_virtio 9p 9pnet fscache ipv6 autofs4 ext4 crc16 mbcache jbd2 sg virtio_blk virtio_net sr_mod cdrom e1000 ata_generic ehci_pci uhci_hcd ehci_hcd usbcore usb_common virtio_pci ata_piix libata floppy virtio_ring virtio scsi_mod [last unloaded: bridge] [98423.255040] CPU: 1 PID: 14173 Comm: ip Tainted: G O 4.5.0-rc2+ #81 [98423.255386] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.1-20150318_183358- 04/01/2014 [98423.255777] task: ffff8800547f5540 ti: ffff88003428c000 task.ti: ffff88003428c000 [98423.256123] RIP: 0010:[<ffffffff81514f3e>] [<ffffffff81514f3e>] netdev_lower_get_next+0x1e/0x30 [98423.256534] RSP: 0018:ffff88003428f940 EFLAGS: 00010207 [98423.256766] RAX: 0002000100000004 RBX: ffff880054ff9000 RCX: 0000000000000000 [98423.257039] RDX: ffff88003428f8b8 RSI: ffff88003428f950 RDI: ffff880054ff90c0 [98423.257287] RBP: ffff88003428f940 R08: 0000000000000000 R09: 0000000000000000 [98423.257537] R10: 0000000000000001 R11: 0000000000000000 R12: ffff88003428f9e0 [98423.257802] R13: ffff880054a5fd00 R14: ffff88003428f970 R15: 0000000000000001 [98423.258055] FS: 00007f3d76881700(0000) GS:ffff88005d000000(0000) knlGS:0000000000000000 [98423.258418] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [98423.258650] CR2: 00007ffe5951ffa8 CR3: 0000000052077000 CR4: 00000000000406e0 [98423.258902] Stack: [98423.259075] ffff88003428f960 ffffffffa0442636 0002000100000004 ffff880054ff9000 [98423.259647] ffff88003428f9b0 ffffffff81518205 ffff880054ff9000 ffff88003428f978 [98423.260208] ffff88003428f978 ffff88003428f9e0 ffff88003428f9e0 ffff880035b35f00 [98423.260739] Call Trace: [98423.260920] [<ffffffffa0442636>] vrf_dev_uninit+0x76/0xa0 [vrf] [98423.261156] [<ffffffff81518205>] rollback_registered_many+0x205/0x390 [98423.261401] [<ffffffff815183ec>] unregister_netdevice_many+0x1c/0x70 [98423.261641] [<ffffffff8153223c>] rtnl_delete_link+0x3c/0x50 [98423.271557] [<ffffffff815335bb>] rtnl_dellink+0xcb/0x1d0 [98423.271800] [<ffffffff811cd7da>] ? __inc_zone_state+0x4a/0x90 [98423.272049] [<ffffffff815337b4>] rtnetlink_rcv_msg+0x84/0x200 [98423.272279] [<ffffffff810cfe7d>] ? trace_hardirqs_on+0xd/0x10 [98423.272513] [<ffffffff8153370b>] ? rtnetlink_rcv+0x1b/0x40 [98423.272755] [<ffffffff81533730>] ? rtnetlink_rcv+0x40/0x40 [98423.272983] [<ffffffff8155d6e7>] netlink_rcv_skb+0x97/0xb0 [98423.273209] [<ffffffff8153371a>] rtnetlink_rcv+0x2a/0x40 [98423.273476] [<ffffffff8155ce8b>] netlink_unicast+0x11b/0x1a0 [98423.273710] [<ffffffff8155d2f1>] netlink_sendmsg+0x3e1/0x610 [98423.273947] [<ffffffff814fbc98>] sock_sendmsg+0x38/0x70 [98423.274175] [<ffffffff814fc253>] ___sys_sendmsg+0x2e3/0x2f0 [98423.274416] [<ffffffff810d841e>] ? do_raw_spin_unlock+0xbe/0x140 [98423.274658] [<ffffffff811e1bec>] ? handle_mm_fault+0x26c/0x2210 [98423.274894] [<ffffffff811e19cd>] ? handle_mm_fault+0x4d/0x2210 [98423.275130] [<ffffffff81269611>] ? __fget_light+0x91/0xb0 [98423.275365] [<ffffffff814fcd42>] __sys_sendmsg+0x42/0x80 [98423.275595] [<ffffffff814fcd92>] SyS_sendmsg+0x12/0x20 [98423.275827] [<ffffffff81611bb6>] entry_SYSCALL_64_fastpath+0x16/0x7a [98423.276073] Code: c3 31 c0 5d c3 0f 1f 84 00 00 00 00 00 66 66 66 66 90 48 8b 06 55 48 81 c7 c0 00 00 00 48 89 e5 48 8b 00 48 39 f8 74 09 48 89 06 <48> 8b 40 e8 5d c3 31 c0 5d c3 0f 1f 84 00 00 00 00 00 66 66 66 [98423.279639] RIP [<ffffffff81514f3e>] netdev_lower_get_next+0x1e/0x30 [98423.279920] RSP <ffff88003428f940> CC: David Ahern <dsa@cumulusnetworks.com> CC: David S. Miller <davem@davemloft.net> CC: Roopa Prabhu <roopa@cumulusnetworks.com> CC: Vlad Yasevich <vyasevic@redhat.com> Fixes: bad531623253 ("vrf: remove slave queue and private slave struct") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: David Ahern <dsa@cumulusnetworks.com> Tested-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18net: caif: fix erroneous return valueAnton Protopopov1-1/+1
The cfrfml_receive() function might return positive value EPROTO Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18appletalk: fix erroneous return valueAnton Protopopov1-1/+1
The atalk_sendmsg() function might return wrong value ENETUNREACH instead of -ENETUNREACH. Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18IFF_NO_QUEUE: Fix for drivers not calling ether_setup()Phil Sutter1-1/+3
My implementation around IFF_NO_QUEUE driver flag assumed that leaving tx_queue_len untouched (specifically: not setting it to zero) by drivers would make it possible to assign a regular qdisc to them without having to worry about setting tx_queue_len to a useful value. This was only partially true: I overlooked that some drivers don't call ether_setup() and therefore not initialize tx_queue_len to the default value of 1000. Consequently, removing the workarounds in place for that case in qdisc implementations which cared about it (namely, pfifo, bfifo, gred, htb, plug and sfb) leads to problems with these specific interface types and qdiscs. Luckily, there's already a sanitization point for drivers setting tx_queue_len to zero, which can be reused to assign the fallback value most qdisc implementations used, which is 1. Fixes: 348e3435cbefa ("net: sched: drop all special handling of tx_queue_len == 0") Tested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18gre: clear IFF_TX_SKB_SHARINGJiri Benc2-2/+4
ether_setup sets IFF_TX_SKB_SHARING but this is not supported by gre as it modifies the skb on xmit. Also, clean up whitespace in ipgre_tap_setup when we're already touching it. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18tcp/dccp: fix another race at listener dismantleEric Dumazet5-35/+35
Ilya reported following lockdep splat: kernel: ========================= kernel: [ BUG: held lock freed! ] kernel: 4.5.0-rc1-ceph-00026-g5e0a311 #1 Not tainted kernel: ------------------------- kernel: swapper/5/0 is freeing memory ffff880035c9d200-ffff880035c9dbff, with a lock still held there! kernel: (&(&queue->rskq_lock)->rlock){+.-...}, at: [<ffffffff816f6a88>] inet_csk_reqsk_queue_add+0x28/0xa0 kernel: 4 locks held by swapper/5/0: kernel: #0: (rcu_read_lock){......}, at: [<ffffffff8169ef6b>] netif_receive_skb_internal+0x4b/0x1f0 kernel: #1: (rcu_read_lock){......}, at: [<ffffffff816e977f>] ip_local_deliver_finish+0x3f/0x380 kernel: #2: (slock-AF_INET){+.-...}, at: [<ffffffff81685ffb>] sk_clone_lock+0x19b/0x440 kernel: #3: (&(&queue->rskq_lock)->rlock){+.-...}, at: [<ffffffff816f6a88>] inet_csk_reqsk_queue_add+0x28/0xa0 To properly fix this issue, inet_csk_reqsk_queue_add() needs to return to its callers if the child as been queued into accept queue. We also need to make sure listener is still there before calling sk->sk_data_ready(), by holding a reference on it, since the reference carried by the child can disappear as soon as the child is put on accept queue. Reported-by: Ilya Dryomov <idryomov@gmail.com> Fixes: ebb516af60e1 ("tcp/dccp: fix race at listener dismantle phase") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18route: check and remove route cache when we get routeXin Long1-14/+63
Since the gc of ipv4 route was removed, the route cached would has no chance to be removed, and even it has been timeout, it still could be used, cause no code to check it's expires. Fix this issue by checking and removing route cache when we get route. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18net_sched fix: reclassification needs to consider ether protocol changesJamal Hadi Salim1-0/+1
actions could change the etherproto in particular with ethernet tunnelled data. Typically such actions, after peeling the outer header, will ask for the packet to be reclassified. We then need to restart the classification with the new proto header. Example setup used to catch this: sudo tc qdisc add dev $ETH ingress sudo $TC filter add dev $ETH parent ffff: pref 1 protocol 802.1Q \ u32 match u32 0 0 flowid 1:1 \ action vlan pop reclassify Fixes: 3b3ae880266d ("net: sched: consolidate tc_classify{,_compat}") Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17tcp: correctly crypto_alloc_hash return checkInsu Yun1-1/+1
crypto_alloc_hash never returns NULL Signed-off-by: Insu Yun <wuninsu@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17net: dsa: Unregister slave_dev in error pathFlorian Fainelli1-0/+1
With commit 0071f56e46da ("dsa: Register netdev before phy"), we are now trying to free a network device that has been previously registered, and in case of errors, this will make us hit the BUG_ON(dev->reg_state != NETREG_UNREGISTERED) condition. Fix this by adding a missing unregister_netdev() before free_netdev(). Fixes: 0071f56e46da ("dsa: Register netdev before phy") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17l2tp: Fix error creating L2TP tunnelsMark Tomlinson1-4/+14
A previous commit (33f72e6) added notification via netlink for tunnels when created/modified/deleted. If the notification returned an error, this error was returned from the tunnel function. If there were no listeners, the error code ESRCH was returned, even though having no listeners is not an error. Other calls to this and other similar notification functions either ignore the error code, or filter ESRCH. This patch checks for ESRCH and does not flag this as an error. Reviewed-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16tcp: md5: release request socket instead of listenerEric Dumazet1-2/+4
If tcp_v4_inbound_md5_hash() returns an error, we must release the refcount on the request socket, not on the listener. The bug was added for IPv4 only. Fixes: 079096f103fac ("tcp/dccp: install syn_recv requests into ehash table") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16tcp: do not set rtt_min to 1Eric Dumazet1-1/+4
There are some cases where rtt_us derives from deltas of jiffies, instead of using usec timestamps. Since we want to track minimal rtt, better to assume a delta of 0 jiffie might be in fact be very close to 1 jiffie. It is kind of sad jiffies_to_usecs(1) calls a function instead of simply using a constant. Fixes: f672258391b42 ("tcp: track min RTT using windowed min-filter") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16net: dsa: remove phy_disconnect from error pathSascha Hauer1-1/+0
The phy has not been initialized, disconnecting it in the error path results in a NULL pointer exception. Drop the phy_disconnect from the error path. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16tipc: fix premature addition of node to lookup tableJon Paul Maloy1-6/+6
In commit 5266698661401a ("tipc: let broadcast packet reception use new link receive function") we introduced a new per-node broadcast reception link instance. This link is created at the moment the node itself is created. Unfortunately, the allocation is done after the node instance has already been added to the node lookup hash table. This creates a potential race condition, where arriving broadcast packets are able to find and access the node before it has been fully initialized, and before the above mentioned link has been created. The result is occasional crashes in the function tipc_bcast_rcv(), which is trying to access the not-yet existing link. We fix this by deferring the addition of the node instance until after it has been fully initialized in the function tipc_node_create(). Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16bridge: mdb: avoid uninitialized variable warningArnd Bergmann1-2/+2
A recent change to the mdb code confused the compiler to the point where it did not realize that the port-group returned from br_mdb_add_group() is always valid when the function returns a nonzero return value, so we get a spurious warning: net/bridge/br_mdb.c: In function 'br_mdb_add': net/bridge/br_mdb.c:542:4: error: 'pg' may be used uninitialized in this function [-Werror=maybe-uninitialized] __br_mdb_notify(dev, entry, RTM_NEWMDB, pg); Slightly rearranging the code in br_mdb_add_group() makes the problem go away, as gcc is clever enough to see that both functions check for 'ret != 0'. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 9e8430f8d60d ("bridge: mdb: Passing the port-group pointer to br_mdb module") Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16net: Copy inner L3 and L4 headers as unaligned on GRE TEBAlexander Duyck1-0/+7
This patch corrects the unaligned accesses seen on GRE TEB tunnels when generating hash keys. Specifically what this patch does is make it so that we force the use of skb_copy_bits when the GRE inner headers will be unaligned due to NET_IP_ALIGNED being a non-zero value. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller7-16/+91
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contain a rather large batch for your net that includes accumulated bugfixes, they are: 1) Run conntrack cleanup from workqueue process context to avoid hitting soft lockup via watchdog for large tables. This is required by the IPv6 masquerading extension. From Florian Westphal. 2) Use original skbuff from nfnetlink batch when calling netlink_ack() on error since this needs to access the skb->sk pointer. 3) Incremental fix on top of recent Sasha Levin's lock fix for conntrack resizing. 4) Fix several problems in nfnetlink batch message header sanitization and error handling, from Phil Turnbull. 5) Select NF_DUP_IPV6 based on CONFIG_IPV6, from Arnd Bergmann. 6) Fix wrong signess in return values on nf_tables counter expression, from Anton Protopopov. Due to the NetDev 1.1 organization burden, I had no chance to pass up this to you any sooner in this release cycle, sorry about that. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16af_unix: Guard against other == sk in unix_dgram_sendmsgRainer Weikusat1-1/+6
The unix_dgram_sendmsg routine use the following test if (unlikely(unix_peer(other) != sk && unix_recvq_full(other))) { to determine if sk and other are in an n:1 association (either established via connect or by using sendto to send messages to an unrelated socket identified by address). This isn't correct as the specified address could have been bound to the sending socket itself or because this socket could have been connected to itself by the time of the unix_peer_get but disconnected before the unix_state_lock(other). In both cases, the if-block would be entered despite other == sk which might either block the sender unintentionally or lead to trying to unlock the same spin lock twice for a non-blocking send. Add a other != sk check to guard against this. Fixes: 7d267278a9ec ("unix: avoid use-after-free in ep_remove_wait_queue") Reported-By: Philipp Hahn <pmhahn@pmhahn.de> Signed-off-by: Rainer Weikusat <rweikusat@mobileactivedefense.com> Tested-by: Philipp Hahn <pmhahn@pmhahn.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16af_unix: Don't set err in unix_stream_read_generic unless there was an errorRainer Weikusat1-6/+10
The present unix_stream_read_generic contains various code sequences of the form err = -EDISASTER; if (<test>) goto out; This has the unfortunate side effect of possibly causing the error code to bleed through to the final out: return copied ? : err; and then to be wrongly returned if no data was copied because the caller didn't supply a data buffer, as demonstrated by the program available at http://pad.lv/1540731 Change it such that err is only set if an error condition was detected. Fixes: 3822b5c2fc62 ("af_unix: Revert 'lock_interruptible' in stream receive code") Reported-by: Joseph Salisbury <joseph.salisbury@canonical.com> Signed-off-by: Rainer Weikusat <rweikusat@mobileactivedefense.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16batman-adv: Avoid endless loop in bat-on-bat netdevice checkAndrew Lunn1-0/+25
batman-adv checks in different situation if a new device is already on top of a different batman-adv device. This is done by getting the iflink of a device and all its parent. It assumes that this iflink is always a parent device in an acyclic graph. But this assumption is broken by devices like veth which are actually a pair of two devices linked to each other. The recursive check would therefore get veth0 when calling dev_get_iflink on veth1. And it gets veth0 when calling dev_get_iflink with veth1. Creating a veth pair and loading batman-adv freezes parts of the system ip link add veth0 type veth peer name veth1 modprobe batman-adv An RCU stall will be detected on the system which cannot be fixed. INFO: rcu_sched self-detected stall on CPU 1: (5264 ticks this GP) idle=3e9/140000000000001/0 softirq=144683/144686 fqs=5249 (t=5250 jiffies g=46 c=45 q=43) Task dump for CPU 1: insmod R running task 0 247 245 0x00000008 ffffffff8151f140 ffffffff8107888e ffff88000fd141c0 ffffffff8151f140 0000000000000000 ffffffff81552df0 ffffffff8107b420 0000000000000001 ffff88000e3fa700 ffffffff81540b00 ffffffff8107d667 0000000000000001 Call Trace: <IRQ> [<ffffffff8107888e>] ? rcu_dump_cpu_stacks+0x7e/0xd0 [<ffffffff8107b420>] ? rcu_check_callbacks+0x3f0/0x6b0 [<ffffffff8107d667>] ? hrtimer_run_queues+0x47/0x180 [<ffffffff8107cf9d>] ? update_process_times+0x2d/0x50 [<ffffffff810873fb>] ? tick_handle_periodic+0x1b/0x60 [<ffffffff810290ae>] ? smp_trace_apic_timer_interrupt+0x5e/0x90 [<ffffffff813bbae2>] ? apic_timer_interrupt+0x82/0x90 <EOI> [<ffffffff812c3fd7>] ? __dev_get_by_index+0x37/0x40 [<ffffffffa0031f3e>] ? batadv_hard_if_event+0xee/0x3a0 [batman_adv] [<ffffffff812c5801>] ? register_netdevice_notifier+0x81/0x1a0 [...] This can be avoided by checking if two devices are each others parent and stopping the check in this situation. Fixes: b7eddd0b3950 ("batman-adv: prevent using any virtual device created on batman-adv as hard-interface") Signed-off-by: Andrew Lunn <andrew@lunn.ch> [sven@narfation.org: rewritten description, extracted fix] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-16batman-adv: Only put orig_node_vlan list reference when removedSven Eckelmann1-2/+4
The batadv_orig_node_vlan reference counter in batadv_tt_global_size_mod can only be reduced when the list entry was actually removed. Otherwise the reference counter may reach zero when batadv_tt_global_size_mod is called from two different contexts for the same orig_node_vlan but only one context is actually removing the entry from the list. The release function for this orig_node_vlan is not called inside the vlan_list_lock spinlock protected region because the function batadv_tt_global_size_mod still holds a orig_node_vlan reference for the object pointer on the stack. Thus the actual release function (when required) will be called only at the end of the function. Fixes: 7ea7b4a14275 ("batman-adv: make the TT CRC logic VLAN specific") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-16batman-adv: Only put gw_node list reference when removedSven Eckelmann1-3/+4
The batadv_gw_node reference counter in batadv_gw_node_update can only be reduced when the list entry was actually removed. Otherwise the reference counter may reach zero when batadv_gw_node_update is called from two different contexts for the same gw_node but only one context is actually removing the entry from the list. The release function for this gw_node is not called inside the list_lock spinlock protected region because the function batadv_gw_node_update still holds a gw_node reference for the object pointer on the stack. Thus the actual release function (when required) will be called only at the end of the function. Fixes: bd3524c14bd0 ("batman-adv: remove obsolete deleted attribute for gateway node") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-13vsock: Fix blocking ops call in prepare_to_waitLaura Abbott1-13/+6
We receoved a bug report from someone using vmware: WARNING: CPU: 3 PID: 660 at kernel/sched/core.c:7389 __might_sleep+0x7d/0x90() do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff810fa68d>] prepare_to_wait+0x2d/0x90 Modules linked in: vmw_vsock_vmci_transport vsock snd_seq_midi snd_seq_midi_event snd_ens1371 iosf_mbi gameport snd_rawmidi snd_ac97_codec ac97_bus snd_seq coretemp snd_seq_device snd_pcm snd_timer snd soundcore ppdev crct10dif_pclmul crc32_pclmul ghash_clmulni_intel vmw_vmci vmw_balloon i2c_piix4 shpchp parport_pc parport acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc btrfs xor raid6_pq 8021q garp stp llc mrp crc32c_intel serio_raw mptspi vmwgfx drm_kms_helper ttm drm scsi_transport_spi mptscsih e1000 ata_generic mptbase pata_acpi CPU: 3 PID: 660 Comm: vmtoolsd Not tainted 4.2.0-0.rc1.git3.1.fc23.x86_64 #1 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/20/2014 0000000000000000 0000000049e617f3 ffff88006ac37ac8 ffffffff818641f5 0000000000000000 ffff88006ac37b20 ffff88006ac37b08 ffffffff810ab446 ffff880068009f40 ffffffff81c63bc0 0000000000000061 0000000000000000 Call Trace: [<ffffffff818641f5>] dump_stack+0x4c/0x65 [<ffffffff810ab446>] warn_slowpath_common+0x86/0xc0 [<ffffffff810ab4d5>] warn_slowpath_fmt+0x55/0x70 [<ffffffff8112551d>] ? debug_lockdep_rcu_enabled+0x1d/0x20 [<ffffffff810fa68d>] ? prepare_to_wait+0x2d/0x90 [<ffffffff810fa68d>] ? prepare_to_wait+0x2d/0x90 [<ffffffff810da2bd>] __might_sleep+0x7d/0x90 [<ffffffff812163b3>] __might_fault+0x43/0xa0 [<ffffffff81430477>] copy_from_iter+0x87/0x2a0 [<ffffffffa039460a>] __qp_memcpy_to_queue+0x9a/0x1b0 [vmw_vmci] [<ffffffffa0394740>] ? qp_memcpy_to_queue+0x20/0x20 [vmw_vmci] [<ffffffffa0394757>] qp_memcpy_to_queue_iov+0x17/0x20 [vmw_vmci] [<ffffffffa0394d50>] qp_enqueue_locked+0xa0/0x140 [vmw_vmci] [<ffffffffa039593f>] vmci_qpair_enquev+0x4f/0xd0 [vmw_vmci] [<ffffffffa04847bb>] vmci_transport_stream_enqueue+0x1b/0x20 [vmw_vsock_vmci_transport] [<ffffffffa047ae05>] vsock_stream_sendmsg+0x2c5/0x320 [vsock] [<ffffffff810fabd0>] ? wake_atomic_t_function+0x70/0x70 [<ffffffff81702af8>] sock_sendmsg+0x38/0x50 [<ffffffff81702ff4>] SYSC_sendto+0x104/0x190 [<ffffffff8126e25a>] ? vfs_read+0x8a/0x140 [<ffffffff817042ee>] SyS_sendto+0xe/0x10 [<ffffffff8186d9ae>] entry_SYSCALL_64_fastpath+0x12/0x76 transport->stream_enqueue may call copy_to_user so it should not be called inside a prepare_to_wait. Narrow the scope of the prepare_to_wait to avoid the bad call. This also applies to vsock_stream_recvmsg as well. Reported-by: Vinson Lee <vlee@freedesktop.org> Tested-by: Vinson Lee <vlee@freedesktop.org> Signed-off-by: Laura Abbott <labbott@fedoraproject.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-13ipv4: fix memory leaks in ip_cmsg_send() callersEric Dumazet4-3/+11
Dmitry reported memory leaks of IP options allocated in ip_cmsg_send() when/if this function returns an error. Callers are responsible for the freeing. Many thanks to Dmitry for the report and diagnostic. Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds15-24/+85
Pull networking fixes from David Miller: 1) Fix BPF handling of branch offset adjustmnets on backjumps, from Daniel Borkmann. 2) Make sure selinux knows about SOCK_DESTROY netlink messages, from Lorenzo Colitti. 3) Fix openvswitch tunnel mtu regression, from David Wragg. 4) Fix ICMP handling of TCP sockets in syn_recv state, from Eric Dumazet. 5) Fix SCTP user hmacid byte ordering bug, from Xin Long. 6) Fix recursive locking in ipv6 addrconf, from Subash Abhinov Kasiviswanathan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: bpf: fix branch offset adjustment on backjumps after patching ctx expansion vxlan, gre, geneve: Set a large MTU on ovs-created tunnel devices geneve: Relax MTU constraints vxlan: Relax MTU constraints flow_dissector: Fix unaligned access in __skb_flow_dissector when used by eth_get_headlen of: of_mdio: Add marvell, 88e1145 to whitelist of PHY compatibilities. selinux: nlmsgtab: add SOCK_DESTROY to the netlink mapping tables sctp: translate network order to host order when users get a hmacid enic: increment devcmd2 result ring in case of timeout tg3: Fix for tg3 transmit queue 0 timed out when too many gso_segs net:Add sysctl_max_skb_frags tcp: do not drop syn_recv on all icmp reports ipv6: fix a lockdep splat unix: correctly track in-flight fds in sending process user_struct update be2net maintainers' email addresses dwc_eth_qos: Reset hardware before PHY start ipv6: addrconf: Fix recursive spin lock call
2016-02-10vxlan, gre, geneve: Set a large MTU on ovs-created tunnel devicesDavid Wragg3-3/+27
Prior to 4.3, openvswitch tunnel vports (vxlan, gre and geneve) could transmit vxlan packets of any size, constrained only by the ability to send out the resulting packets. 4.3 introduced netdevs corresponding to tunnel vports. These netdevs have an MTU, which limits the size of a packet that can be successfully encapsulated. The default MTU values are low (1500 or less), which is awkwardly small in the context of physical networks supporting jumbo frames, and leads to a conspicuous change in behaviour for userspace. Instead, set the MTU on openvswitch-created netdevs to be the relevant maximum (i.e. the maximum IP packet size minus any relevant overhead), effectively restoring the behaviour prior to 4.3. Signed-off-by: David Wragg <david@weave.works> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-09flow_dissector: Fix unaligned access in __skb_flow_dissector when used by eth_get_headlenAlexander Duyck1-3/+6
This patch fixes an issue with unaligned accesses when using eth_get_headlen on a page that was DMA aligned instead of being IP aligned. The fact is when trying to check the length we don't need to be looking at the flow label so we can reorder the checks to first check if we are supposed to gather the flow label and then make the call to actually get it. v2: Updated path so that either STOP_AT_FLOW_LABEL or KEY_FLOW_LABEL can cause us to check for the flow label. Reported-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-09sctp: translate network order to host order when users get a hmacidXin Long1-2/+7
Commit ed5a377d87dc ("sctp: translate host order to network order when setting a hmacid") corrected the hmacid byte-order when setting a hmacid. but the same issue also exists on getting a hmacid. We fix it by changing hmacids to host order when users get them with getsockopt. Fixes: Commit ed5a377d87dc ("sctp: translate host order to network order when setting a hmacid") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-09net:Add sysctl_max_skb_fragsHans Westgaard Ry3-2/+14
Devices may have limits on the number of fragments in an skb they support. Current codebase uses a constant as maximum for number of fragments one skb can hold and use. When enabling scatter/gather and running traffic with many small messages the codebase uses the maximum number of fragments and may thereby violate the max for certain devices. The patch introduces a global variable as max number of fragments. Signed-off-by: Hans Westgaard Ry <hans.westgaard.ry@oracle.com> Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-09tcp: do not drop syn_recv on all icmp reportsEric Dumazet2-5/+11
Petr Novopashenniy reported that ICMP redirects on SYN_RECV sockets were leading to RST. This is of course incorrect. A specific list of ICMP messages should be able to drop a SYN_RECV. For instance, a REDIRECT on SYN_RECV shall be ignored, as we do not hold a dst per SYN_RECV pseudo request. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111751 Fixes: 079096f103fa ("tcp/dccp: install syn_recv requests into ehash table") Reported-by: Petr Novopashenniy <pety@rusnet.ru> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-08ipv6: fix a lockdep splatEric Dumazet1-2/+3
Silence lockdep false positive about rcu_dereference() being used in the wrong context. First one should use rcu_dereference_protected() as we own the spinlock. Second one should be a normal assignation, as no barrier is needed. Fixes: 18367681a10bd ("ipv6 flowlabel: Convert np->ipv6_fl_list to RCU.") Reported-by: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-08unix: correctly track in-flight fds in sending process user_structHannes Frederic Sowa3-6/+13
The commit referenced in the Fixes tag incorrectly accounted the number of in-flight fds over a unix domain socket to the original opener of the file-descriptor. This allows another process to arbitrary deplete the original file-openers resource limit for the maximum of open files. Instead the sending processes and its struct cred should be credited. To do so, we add a reference counted struct user_struct pointer to the scm_fp_list and use it to account for the number of inflight unix fds. Fixes: 712f4aad406bb1 ("unix: properly account for FDs passed over unix sockets") Reported-by: David Herrmann <dh.herrmann@gmail.com> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Linus Torvalds <torvalds@linux-foundation.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-08netfilter: nft_counter: fix erroneous return valuesAnton Protopopov1-2/+2
The nft_counter_init() and nft_counter_clone() functions should return negative error value -ENOMEM instead of positive ENOMEM. Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-02-08netfilter: tee: select NF_DUP_IPV6 unconditionallyArnd Bergmann2-3/+3
The NETFILTER_XT_TARGET_TEE option selects NF_DUP_IPV6 whenever IP6_NF_IPTABLES is enabled, and it ensures that it cannot be builtin itself if NF_CONNTRACK is a loadable module, as that is a dependency for NF_DUP_IPV6. However, NF_DUP_IPV6 can be enabled even if IP6_NF_IPTABLES is turned off, and it only really depends on IPV6. With the current check in tee_tg6, we call nf_dup_ipv6() whenever NF_DUP_IPV6 is enabled. This can however be a loadable module which is unreachable from a built-in xt_TEE: net/built-in.o: In function `tee_tg6': :(.text+0x67728): undefined reference to `nf_dup_ipv6' The bug was originally introduced in the split of the xt_TEE module into separate modules for ipv4 and ipv6, and two patches tried to fix it unsuccessfully afterwards. This is a revert of the the first incorrect attempt to fix it, going back to depending on IPV6 as the dependency, and we adapt the 'select' condition accordingly. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: bbde9fc1824a ("netfilter: factor out packet duplication for IPv4/IPv6") Fixes: 116984a316c3 ("netfilter: xt_TEE: use IS_ENABLED(CONFIG_NF_DUP_IPV6)") Fixes: 74ec4d55c4d2 ("netfilter: fix xt_TEE and xt_TPROXY dependencies") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-02-08netfilter: nfnetlink: correctly validate length of batch messagesPhil Turnbull1-4/+6
If nlh->nlmsg_len is zero then an infinite loop is triggered because 'skb_pull(skb, msglen);' pulls zero bytes. The calculation in nlmsg_len() underflows if 'nlh->nlmsg_len < NLMSG_HDRLEN' which bypasses the length validation and will later trigger an out-of-bound read. If the length validation does fail then the malformed batch message is copied back to userspace. However, we cannot do this because the nlh->nlmsg_len can be invalid. This leads to an out-of-bounds read in netlink_ack: [ 41.455421] ================================================================== [ 41.456431] BUG: KASAN: slab-out-of-bounds in memcpy+0x1d/0x40 at addr ffff880119e79340 [ 41.456431] Read of size 4294967280 by task a.out/987 [ 41.456431] ============================================================================= [ 41.456431] BUG kmalloc-512 (Not tainted): kasan: bad access detected [ 41.456431] ----------------------------------------------------------------------------- ... [ 41.456431] Bytes b4 ffff880119e79310: 00 00 00 00 d5 03 00 00 b0 fb fe ff 00 00 00 00 ................ [ 41.456431] Object ffff880119e79320: 20 00 00 00 10 00 05 00 00 00 00 00 00 00 00 00 ............... [ 41.456431] Object ffff880119e79330: 14 00 0a 00 01 03 fc 40 45 56 11 22 33 10 00 05 .......@EV."3... [ 41.456431] Object ffff880119e79340: f0 ff ff ff 88 99 aa bb 00 14 00 0a 00 06 fe fb ................ ^^ start of batch nlmsg with nlmsg_len=4294967280 ... [ 41.456431] Memory state around the buggy address: [ 41.456431] ffff880119e79400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 41.456431] ffff880119e79480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 41.456431] >ffff880119e79500: 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc [ 41.456431] ^ [ 41.456431] ffff880119e79580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 41.456431] ffff880119e79600: fc fc fc fc fc fc fc fc fc fc fb fb fb fb fb fb [ 41.456431] ================================================================== Fix this with better validation of nlh->nlmsg_len and by setting NFNL_BATCH_FAILURE if any batch message fails length validation. CAP_NET_ADMIN is required to trigger the bugs. Fixes: 9ea2aa8b7dba ("netfilter: nfnetlink: validate nfnetlink header from batch") Signed-off-by: Phil Turnbull <phil.turnbull@oracle.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-02-06ipv6: addrconf: Fix recursive spin lock callsubashab@codeaurora.org1-1/+4
A rcu stall with the following backtrace was seen on a system with forwarding, optimistic_dad and use_optimistic set. To reproduce, set these flags and allow ipv6 autoconf. This occurs because the device write_lock is acquired while already holding the read_lock. Back trace below - INFO: rcu_preempt self-detected stall on CPU { 1} (t=2100 jiffies g=3992 c=3991 q=4471) <6> Task dump for CPU 1: <2> kworker/1:0 R running task 12168 15 2 0x00000002 <2> Workqueue: ipv6_addrconf addrconf_dad_work <6> Call trace: <2> [<ffffffc000084da8>] el1_irq+0x68/0xdc <2> [<ffffffc000cc4e0c>] _raw_write_lock_bh+0x20/0x30 <2> [<ffffffc000bc5dd8>] __ipv6_dev_ac_inc+0x64/0x1b4 <2> [<ffffffc000bcbd2c>] addrconf_join_anycast+0x9c/0xc4 <2> [<ffffffc000bcf9f0>] __ipv6_ifa_notify+0x160/0x29c <2> [<ffffffc000bcfb7c>] ipv6_ifa_notify+0x50/0x70 <2> [<ffffffc000bd035c>] addrconf_dad_work+0x314/0x334 <2> [<ffffffc0000b64c8>] process_one_work+0x244/0x3fc <2> [<ffffffc0000b7324>] worker_thread+0x2f8/0x418 <2> [<ffffffc0000bb40c>] kthread+0xe0/0xec v2: do addrconf_dad_kick inside read lock and then acquire write lock for ipv6_ifa_notify as suggested by Eric Fixes: 7fd2561e4ebdd ("net: ipv6: Add a sysctl to make optimistic addresses useful candidates") Cc: Eric Dumazet <edumazet@google.com> Cc: Erik Kline <ek@google.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-05Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds3-12/+50
Pull Ceph fixes from Sage Weil: "We have a few wire protocol compatibility fixes, ports of a few recent CRUSH mapping changes, and a couple error path fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: libceph: MOSDOpReply v7 encoding libceph: advertise support for TUNABLES5 crush: decode and initialize chooseleaf_stable crush: add chooseleaf_stable tunable crush: ensure take bucket value is valid crush: ensure bucket id is valid before indexing buckets array ceph: fix snap context leak in error path ceph: checking for IS_ERR instead of NULL
2016-02-04libceph: MOSDOpReply v7 encodingIlya Dryomov1-0/+10
Empty request_redirect_t (struct ceph_request_redirect in the kernel client) is now encoded with a bool. NEW_OSDOPREPLY_ENCODING feature bit overlaps with already supported CRUSH_TUNABLES5. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2016-02-04crush: decode and initialize chooseleaf_stableIlya Dryomov1-5/+14
Also add missing \n while at it. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2016-02-04crush: add chooseleaf_stable tunableIlya Dryomov1-4/+14
Add a tunable to fix the bug that chooseleaf may cause unnecessary pg migrations when some device fails. Reflects ceph.git commit fdb3f664448e80d984470f32f04e2e6f03ab52ec. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2016-02-04crush: ensure take bucket value is validIlya Dryomov1-1/+2
Ensure that the take argument is a valid bucket ID before indexing the buckets array. Reflects ceph.git commit 93ec538e8a667699876b72459b8ad78966d89c61. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2016-02-04crush: ensure bucket id is valid before indexing buckets arrayIlya Dryomov1-2/+10
We were indexing the buckets array without verifying the index was within the [0,max_buckets) range. This could happen because a multistep rule does not have enough buckets and has CRUSH_ITEM_NONE for an intermediate result, which would feed in CRUSH_ITEM_NONE and make us crash. Reflects ceph.git commit 976a24a326da8931e689ee22fce35feab5b67b76. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.