| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
The label is only used from inside the #ifdef and should be
hidden the same way, to avoid this warning:
net/sched/act_tunnel_key.c: In function 'tunnel_key_init':
net/sched/act_tunnel_key.c:389:1: error: label 'release_tun_meta' defined but not used [-Werror=unused-label]
release_tun_meta:
Fixes: 41411e2fd6b8 ("net/sched: act_tunnel_key: Add dst_cache support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When CONFIG_SYSCTL is turned off, we get a link failure for
the newly introduced tuning knob.
net/ipv6/addrconf.o: In function `addrconf_init_net':
addrconf.c:(.text+0x31dc): undefined reference to `sysctl_devconf_inherit_init_net'
Add an IS_ENABLED() check to fall back to the default behavior
(sysctl_devconf_inherit_init_net=0) here.
Fixes: 856c395cfa63 ("net: introduce a knob to control whether to inherit devconf config")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Christian Brauner <christian@brauner.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is possible that a reporter state will be updated due to a recover flow
which is not triggered by a devlink health related operation, but as a side
effect of some other operation in the system.
Expose devlink health API for a direct update of a reporter status.
Move devlink_health_reporter_state enum definition to devlink.h so it could
be used from drivers as a parameter of devlink_health_reporter_state_update.
In addition, add trace_devlink_health_reporter_state_update to provide user
notification for reporter state change.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If devlink_health_report() aborted the recover flow due to grace period checker,
it left the reporter status as DEVLINK_HEALTH_REPORTER_STATE_HEALTHY, which is
a bug. Fix that by always setting the reporter state to
DEVLINK_HEALTH_REPORTER_STATE_ERROR prior to running the checker mentioned above.
In addition, save the previous health_state in a temporary variable, then use
it in the abort check comparison instead of using reporter->health_state which
might be already changed.
Fixes: c8e1da0bf923 ("devlink: Add health report functionality")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The user msg is also copied to the abort packet when doing SCTP_ABORT in
sctp_sendmsg_check_sflags(). When SCTP_SENDALL is set, iov_iter_revert()
should have been called for sending abort on the next asoc with copying
this msg. Otherwise, memcpy_from_msg() in sctp_make_abort_user() will
fail and return error.
Fixes: 4910280503f3 ("sctp: add support for snd flag SCTP_SENDALL process in sendmsg")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Similar to commit 44f49dd8b5a6 ("ipmr: fix possible race resulting from
improper usage of IP_INC_STATS_BH() in preemptible context."), we cannot
assume preemption is disabled when incrementing the counter and
accessing a per-CPU variable.
Preemption can be enabled when we add a route in process context that
corresponds to packets stored in the unresolved queue, which are then
forwarded using this route [1].
Fix this by using IP6_INC_STATS() which takes care of disabling
preemption on architectures where it is needed.
[1]
[ 157.451447] BUG: using __this_cpu_add() in preemptible [00000000] code: smcrouted/2314
[ 157.460409] caller is ip6mr_forward2+0x73e/0x10e0
[ 157.460434] CPU: 3 PID: 2314 Comm: smcrouted Not tainted 5.0.0-rc7-custom-03635-g22f2712113f1 #1336
[ 157.460449] Hardware name: Mellanox Technologies Ltd. MSN2100-CB2FO/SA001017, BIOS 5.6.5 06/07/2016
[ 157.460461] Call Trace:
[ 157.460486] dump_stack+0xf9/0x1be
[ 157.460553] check_preemption_disabled+0x1d6/0x200
[ 157.460576] ip6mr_forward2+0x73e/0x10e0
[ 157.460705] ip6_mr_forward+0x9a0/0x1510
[ 157.460771] ip6mr_mfc_add+0x16b3/0x1e00
[ 157.461155] ip6_mroute_setsockopt+0x3cb/0x13c0
[ 157.461384] do_ipv6_setsockopt.isra.8+0x348/0x4060
[ 157.462013] ipv6_setsockopt+0x90/0x110
[ 157.462036] rawv6_setsockopt+0x4a/0x120
[ 157.462058] __sys_setsockopt+0x16b/0x340
[ 157.462198] __x64_sys_setsockopt+0xbf/0x160
[ 157.462220] do_syscall_64+0x14d/0x610
[ 157.462349] entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes: 0912ea38de61 ("[IPV6] MROUTE: Add stats in multicast routing module method ip6_mr_forward().")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Amit Cohen <amitc@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Switch to bitmap_zalloc() to show clearly what we are allocating.
Besides that it returns pointer of bitmap type instead of opaque void *.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-03-04
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add AF_XDP support to libbpf. Rationale is to facilitate writing
AF_XDP applications by offering higher-level APIs that hide many
of the details of the AF_XDP uapi. Sample programs are converted
over to this new interface as well, from Magnus.
2) Introduce a new cant_sleep() macro for annotation of functions
that cannot sleep and use it in BPF_PROG_RUN() to assert that
BPF programs run under preemption disabled context, from Peter.
3) Introduce per BPF prog stats in order to monitor the usage
of BPF; this is controlled by kernel.bpf_stats_enabled sysctl
knob where monitoring tools can make use of this to efficiently
determine the average cost of programs, from Alexei.
4) Split up BPF selftest's test_progs similarly as we already
did with test_verifier. This allows to further reduce merge
conflicts in future and to get more structure into our
quickly growing BPF selftest suite, from Stanislav.
5) Fix a bug in BTF's dedup algorithm which can cause an infinite
loop in some circumstances; also various BPF doc fixes and
improvements, from Andrii.
6) Various BPF sample cleanups and migration to libbpf in order
to further isolate the old sample loader code (so we can get
rid of it at some point), from Jakub.
7) Add a new BPF helper for BPF cgroup skb progs that allows
to set ECN CE code point and a Host Bandwidth Manager (HBM)
sample program for limiting the bandwidth used by v2 cgroups,
from Lawrence.
8) Enable write access to skb->queue_mapping from tc BPF egress
programs in order to let BPF pick TX queue, from Jesper.
9) Fix a bug in BPF spinlock handling for map-in-map which did
not propagate spin_lock_off to the meta map, from Yonghong.
10) Fix a bug in the new per-CPU BPF prog counters to properly
initialize stats for each CPU, from Eric.
11) Add various BPF helper prototypes to selftest's bpf_helpers.h,
from Willem.
12) Fix various BPF samples bugs in XDP and tracing progs,
from Toke, Daniel and Yonghong.
13) Silence preemption splat in test_bpf after BPF_PROG_RUN()
enforces it now everywhere, from Anders.
14) Fix a signedness bug in libbpf's btf_dedup_ref_type() to
get error handling working, from Dan.
15) Fix bpftool documentation and auto-completion with regards
to stream_{verdict,parser} attach types, from Alban.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, the receive function fails to handle records already
decrypted by the device due to the commit mentioned below.
This commit advances the TLS record sequence number and prepares the context
to handle the next record.
Fixes: fedf201e1296 ("net: tls: Refactor control message handling on recv")
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Today, tls_sw_recvmsg is capable of using asynchronous mode to handle
application data TLS records. Moreover, it assumes that if the cipher
can be handled asynchronously, then all packets will be processed
asynchronously.
However, this assumption is not always true. Specifically, for AES-GCM
in TLS1.2, it causes data corruption, and breaks user applications.
This patch fixes this problem by separating the async capability from
the decryption operation result.
Fixes: c0ab4732d4c6 ("net/tls: Do not use async crypto for non-data records")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
TLS device cannot use the sw context. This patch returns the original
tls device write space handler and moves the sw/device specific portions
to the relevant files.
Also, we remove the write_space call for the tls_sw flow, because it
handles partial records in its delayed tx work handler.
Fixes: a42055e8d2c3 ("net/tls: Add support for async encryption of records for performance")
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cleanup the handling of partial records while fixing a bug where the
tls_push_pending_closed_record function is using the software tls
context instead of the hardware context.
The bug resulted in the following crash:
[ 88.791229] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
[ 88.793271] #PF error: [normal kernel read fault]
[ 88.794449] PGD 800000022a426067 P4D 800000022a426067 PUD 22a156067 PMD 0
[ 88.795958] Oops: 0000 [#1] SMP PTI
[ 88.796884] CPU: 2 PID: 4973 Comm: openssl Not tainted 5.0.0-rc4+ #3
[ 88.798314] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
[ 88.800067] RIP: 0010:tls_tx_records+0xef/0x1d0 [tls]
[ 88.801256] Code: 00 02 48 89 43 08 e8 a0 0b 96 d9 48 89 df e8 48 dd
4d d9 4c 89 f8 4d 8b bf 98 00 00 00 48 05 98 00 00 00 48 89 04 24 49 39
c7 <49> 8b 1f 4d 89 fd 0f 84 af 00 00 00 41 8b 47 10 85 c0 0f 85 8d 00
[ 88.805179] RSP: 0018:ffffbd888186fca8 EFLAGS: 00010213
[ 88.806458] RAX: ffff9af1ed657c98 RBX: ffff9af1e88a1980 RCX: 0000000000000000
[ 88.808050] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9af1e88a1980
[ 88.809724] RBP: ffff9af1e88a1980 R08: 0000000000000017 R09: ffff9af1ebeeb700
[ 88.811294] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
[ 88.812917] R13: ffff9af1e88a1980 R14: ffff9af1ec13f800 R15: 0000000000000000
[ 88.814506] FS: 00007fcad2240740(0000) GS:ffff9af1f7880000(0000) knlGS:0000000000000000
[ 88.816337] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 88.817717] CR2: 0000000000000000 CR3: 0000000228b3e000 CR4: 00000000001406e0
[ 88.819328] Call Trace:
[ 88.820123] tls_push_data+0x628/0x6a0 [tls]
[ 88.821283] ? remove_wait_queue+0x20/0x60
[ 88.822383] ? n_tty_read+0x683/0x910
[ 88.823363] tls_device_sendmsg+0x53/0xa0 [tls]
[ 88.824505] sock_sendmsg+0x36/0x50
[ 88.825492] sock_write_iter+0x87/0x100
[ 88.826521] __vfs_write+0x127/0x1b0
[ 88.827499] vfs_write+0xad/0x1b0
[ 88.828454] ksys_write+0x52/0xc0
[ 88.829378] do_syscall_64+0x5b/0x180
[ 88.830369] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 88.831603] RIP: 0033:0x7fcad1451680
[ 1248.470626] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
[ 1248.472564] #PF error: [normal kernel read fault]
[ 1248.473790] PGD 0 P4D 0
[ 1248.474642] Oops: 0000 [#1] SMP PTI
[ 1248.475651] CPU: 3 PID: 7197 Comm: openssl Tainted: G OE 5.0.0-rc4+ #3
[ 1248.477426] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
[ 1248.479310] RIP: 0010:tls_tx_records+0x110/0x1f0 [tls]
[ 1248.480644] Code: 00 02 48 89 43 08 e8 4f cb 63 d7 48 89 df e8 f7 9c
1b d7 4c 89 f8 4d 8b bf 98 00 00 00 48 05 98 00 00 00 48 89 04 24 49 39
c7 <49> 8b 1f 4d 89 fd 0f 84 af 00 00 00 41 8b 47 10 85 c0 0f 85 8d 00
[ 1248.484825] RSP: 0018:ffffaa0a41543c08 EFLAGS: 00010213
[ 1248.486154] RAX: ffff955a2755dc98 RBX: ffff955a36031980 RCX: 0000000000000006
[ 1248.487855] RDX: 0000000000000000 RSI: 000000000000002b RDI: 0000000000000286
[ 1248.489524] RBP: ffff955a36031980 R08: 0000000000000000 R09: 00000000000002b1
[ 1248.491394] R10: 0000000000000003 R11: 00000000ad55ad55 R12: 0000000000000000
[ 1248.493162] R13: 0000000000000000 R14: ffff955a2abe6c00 R15: 0000000000000000
[ 1248.494923] FS: 0000000000000000(0000) GS:ffff955a378c0000(0000) knlGS:0000000000000000
[ 1248.496847] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1248.498357] CR2: 0000000000000000 CR3: 000000020c40e000 CR4: 00000000001406e0
[ 1248.500136] Call Trace:
[ 1248.500998] ? tcp_check_oom+0xd0/0xd0
[ 1248.502106] tls_sk_proto_close+0x127/0x1e0 [tls]
[ 1248.503411] inet_release+0x3c/0x60
[ 1248.504530] __sock_release+0x3d/0xb0
[ 1248.505611] sock_close+0x11/0x20
[ 1248.506612] __fput+0xb4/0x220
[ 1248.507559] task_work_run+0x88/0xa0
[ 1248.508617] do_exit+0x2cb/0xbc0
[ 1248.509597] ? core_sys_select+0x17a/0x280
[ 1248.510740] do_group_exit+0x39/0xb0
[ 1248.511789] get_signal+0x1d0/0x630
[ 1248.512823] do_signal+0x36/0x620
[ 1248.513822] exit_to_usermode_loop+0x5c/0xc6
[ 1248.515003] do_syscall_64+0x157/0x180
[ 1248.516094] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 1248.517456] RIP: 0033:0x7fb398bd3f53
[ 1248.518537] Code: Bad RIP value.
Fixes: a42055e8d2c3 ("net/tls: Add support for async encryption of records for performance")
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzkaller report this:
BUG: memory leak
unreferenced object 0xffff88837a71a500 (size 256):
comm "syz-executor.2", pid 9770, jiffies 4297825125 (age 17.843s)
hex dump (first 32 bytes):
00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N..........
ff ff ff ff ff ff ff ff 20 c0 ef 86 ff ff ff ff ........ .......
backtrace:
[<00000000db12624b>] netdev_register_kobject+0x124/0x2e0 net/core/net-sysfs.c:1751
[<00000000dc49a994>] register_netdevice+0xcc1/0x1270 net/core/dev.c:8516
[<00000000e5f3fea0>] tun_set_iff drivers/net/tun.c:2649 [inline]
[<00000000e5f3fea0>] __tun_chr_ioctl+0x2218/0x3d20 drivers/net/tun.c:2883
[<000000001b8ac127>] vfs_ioctl fs/ioctl.c:46 [inline]
[<000000001b8ac127>] do_vfs_ioctl+0x1a5/0x10e0 fs/ioctl.c:690
[<0000000079b269f8>] ksys_ioctl+0x89/0xa0 fs/ioctl.c:705
[<00000000de649beb>] __do_sys_ioctl fs/ioctl.c:712 [inline]
[<00000000de649beb>] __se_sys_ioctl fs/ioctl.c:710 [inline]
[<00000000de649beb>] __x64_sys_ioctl+0x74/0xb0 fs/ioctl.c:710
[<000000007ebded1e>] do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:290
[<00000000db315d36>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[<00000000115be9bb>] 0xffffffffffffffff
It should call kset_unregister to free 'dev->queues_kset'
in error path of register_queue_kobjects, otherwise will cause a mem leak.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 1d24eb4815d1 ("xps: Transmit Packet Steering")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
By default IPv6 socket with IPV6_ROUTER_ALERT socket option set will
receive all IPv6 RA packets from all namespaces.
IPV6_ROUTER_ALERT_ISOLATE socket option restricts packets received by
the socket to be only from the socket's namespace.
Signed-off-by: Maxim Martynov <maxim@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add __user attributes in some of the casts in this function to avoid
the following sparse warnings:
net/compat.c:592:57: warning: cast removes address space of expression
net/compat.c:592:57: warning: incorrect type in initializer (different address spaces)
net/compat.c:592:57: expected struct compat_group_req [noderef] <asn:1>*gr32
net/compat.c:592:57: got void *<noident>
net/compat.c:613:65: warning: cast removes address space of expression
net/compat.c:613:65: warning: incorrect type in initializer (different address spaces)
net/compat.c:613:65: expected struct compat_group_source_req [noderef] <asn:1>*gsr32
net/compat.c:613:65: got void *<noident>
net/compat.c:634:60: warning: cast removes address space of expression
net/compat.c:634:60: warning: incorrect type in initializer (different address spaces)
net/compat.c:634:60: expected struct compat_group_filter [noderef] <asn:1>*gf32
net/compat.c:634:60: got void *<noident>
net/compat.c:672:52: warning: cast removes address space of expression
net/compat.c:672:52: warning: incorrect type in initializer (different address spaces)
net/compat.c:672:52: expected struct compat_group_filter [noderef] <asn:1>*gf32
net/compat.c:672:52: got void *<noident>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We were skipping the prepare phase which causes some problems with at
least a couple of drivers:
- mv88e6xxx chooses to skip programming VID = 0 with -EOPNOTSUPP in
the prepare phase, but we would still try to force this VID since we
would only call the commit phase and so we would get the driver to
return -EINVAL instead
- qca8k does not currently have a port_vlan_add() callback implemented,
yet we would try to call that unconditionally leading to a NPD
Fix both issues by conforming to the current model doing a
prepare/commit phase, this makes us consistent throughout the code and
assumptions.
Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Reported-by: Michal Vokáč <michal.vokac@ysoft.com>
Fixes: 061f6a505ac3 ("net: dsa: Add ndo_vlan_rx_{add, kill}_vid implementation")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With more modes added the logic in cake_select_tin() was getting a bit
hairy, and it turns out we can actually simplify it quite a bit. This also
allows us to get rid of one of the two diffserv parsing functions, which
has the added benefit that already-zeroed DSCP fields won't get re-written.
Suggested-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add flag 'FWMARK' to enable use of firewall connmarks as tin selector.
The connmark (skbuff->mark) needs to be in the range 1->tin_cnt ie.
for diffserv3 the mark needs to be 1->3.
Background
Typically CAKE uses DSCP as the basis for tin selection. DSCP values
are relatively easily changed as part of the egress path, usually with
iptables & the mangle table, ingress is more challenging. CAKE is often
used on the WAN interface of a residential gateway where passthrough of
DSCP from the ISP is either missing or set to unhelpful values thus use
of ingress DSCP values for tin selection isn't helpful in that
environment.
An approach to solving the ingress tin selection problem is to use
CAKE's understanding of tc filters. Naive tc filters could match on
source/destination port numbers and force tin selection that way, but
multiple filters don't scale particularly well as each filter must be
traversed whether it matches or not. e.g. a simple example to map 3
firewall marks to tins:
MAJOR=$( tc qdisc show dev $DEV | head -1 | awk '{print $3}' )
tc filter add dev $DEV parent $MAJOR protocol all handle 0x01 fw action skbedit priority ${MAJOR}1
tc filter add dev $DEV parent $MAJOR protocol all handle 0x02 fw action skbedit priority ${MAJOR}2
tc filter add dev $DEV parent $MAJOR protocol all handle 0x03 fw action skbedit priority ${MAJOR}3
Another option is to use eBPF cls_act with tc filters e.g.
MAJOR=$( tc qdisc show dev $DEV | head -1 | awk '{print $3}' )
tc filter add dev $DEV parent $MAJOR bpf da obj my-bpf-fwmark-to-class.o
This has the disadvantages of a) needing someone to write & maintain
the bpf program, b) a bpf toolchain to compile it and c) needing to
hardcode the major number in the bpf program so it matches the cake
instance (or forcing the cake instance to a particular major number)
since the major number cannot be passed to the bpf program via tc
command line.
As already hinted at by the previous examples, it would be helpful
to associate tins with something that survives the Internet path and
ideally allows tin selection on both egress and ingress. Netfilter's
conntrack permits setting an identifying mark on a connection which
can also be restored to an ingress packet with tc action connmark e.g.
tc filter add dev eth0 parent ffff: protocol all prio 10 u32 \
match u32 0 0 flowid 1:1 action connmark action mirred egress redirect dev ifb1
Since tc's connmark action has restored any connmark into skb->mark,
any of the previous solutions are based upon it and in one form or
another copy that mark to the skb->priority field where again CAKE
picks this up.
This change cuts out at least one of the (less intuitive &
non-scalable) middlemen and permit direct access to skb->mark.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
CAKE host fairness does not work well with TCP flows in dual-srchost and
dual-dsthost setup. The reason is that ACKs generated by TCP flows are
classified as sparse flows, and affect flow isolation from other hosts. Fix
this by calculating host_load based only on the bulk flows a host
generates. In a hash collision the host_bulk_flow_count values must be
decremented on the old hosts and incremented on the new ones *if* the queue
is in the bulk set.
Reported-by: Pete Heist <peteheist@gmail.com>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
KSZ9893 switch is similar to KSZ9477 switch except the ingress tail tag
has 1 byte instead of 2 bytes. The size of the portmap is smaller and
so the override and lookup bits are also moved.
Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
KASAN report this:
BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71
Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806
CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xfa/0x1ce lib/dump_stack.c:113
print_address_description+0x65/0x270 mm/kasan/report.c:187
kasan_report+0x149/0x18d mm/kasan/report.c:317
pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71
remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667
atalk_proc_exit+0x18/0x820 [appletalk]
atalk_exit+0xf/0x5a [appletalk]
__do_sys_delete_module kernel/module.c:1018 [inline]
__se_sys_delete_module kernel/module.c:961 [inline]
__x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0
RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc
R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff
Allocated by task 2806:
set_track mm/kasan/common.c:85 [inline]
__kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496
slab_post_alloc_hook mm/slab.h:444 [inline]
slab_alloc_node mm/slub.c:2739 [inline]
slab_alloc mm/slub.c:2747 [inline]
kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752
kmem_cache_zalloc include/linux/slab.h:730 [inline]
__proc_create+0x30f/0xa20 fs/proc/generic.c:408
proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469
0xffffffffc10c01bb
0xffffffffc10c0166
do_one_initcall+0xfa/0x5ca init/main.c:887
do_init_module+0x204/0x5f6 kernel/module.c:3460
load_module+0x66b2/0x8570 kernel/module.c:3808
__do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 2806:
set_track mm/kasan/common.c:85 [inline]
__kasan_slab_free+0x130/0x180 mm/kasan/common.c:458
slab_free_hook mm/slub.c:1409 [inline]
slab_free_freelist_hook mm/slub.c:1436 [inline]
slab_free mm/slub.c:2986 [inline]
kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002
pde_put+0x6e/0x80 fs/proc/generic.c:647
remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684
0xffffffffc10c031c
0xffffffffc10c0166
do_one_initcall+0xfa/0x5ca init/main.c:887
do_init_module+0x204/0x5f6 kernel/module.c:3460
load_module+0x66b2/0x8570 kernel/module.c:3808
__do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at ffff8881f41fe500
which belongs to the cache proc_dir_entry of size 256
The buggy address is located 176 bytes inside of
256-byte region [ffff8881f41fe500, ffff8881f41fe600)
The buggy address belongs to the page:
page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0
flags: 0x2fffc0000000200(slab)
raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00
raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
It should check the return value of atalk_proc_init fails,
otherwise atalk_exit will trgger use-after-free in pde_subdir_find
while unload the module.This patch fix error cleanup path of atalk_init
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use remove_proc_subtree to remove the whole subtree
on cleanup.Also do some cleanup.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the series fc8b81a5981f ("Merge branch 'lockless-qdisc-series'")
John made the assumption that the data path had no need to read
the qdisc qlen (number of packets in the qdisc).
It is true when pfifo_fast is used as the root qdisc, or as direct MQ/MQPRIO
children.
But pfifo_fast can be used as leaf in class full qdiscs, and existing
logic needs to access the child qlen in an efficient way.
HTB breaks badly, since it uses cl->leaf.q->q.qlen in :
htb_activate() -> WARN_ON()
htb_dequeue_tree() to decide if a class can be htb_deactivated
when it has no more packets.
HFSC, DRR, CBQ, QFQ have similar issues, and some calls to
qdisc_tree_reduce_backlog() also read q.qlen directly.
Using qdisc_qlen_sum() (which iterates over all possible cpus)
in the data path is a non starter.
It seems we have to put back qlen in a central location,
at least for stable kernels.
For all qdisc but pfifo_fast, qlen is guarded by the qdisc lock,
so the existing q.qlen{++|--} are correct.
For 'lockless' qdisc (pfifo_fast so far), we need to use atomic_{inc|dec}()
because the spinlock might be not held (for example from
pfifo_fast_enqueue() and pfifo_fast_dequeue())
This patch adds atomic_qlen (in the same location than qlen)
and renames the following helpers, since we want to express
they can be used without qdisc lock, and that qlen is no longer percpu.
- qdisc_qstats_cpu_qlen_dec -> qdisc_qstats_atomic_qlen_dec()
- qdisc_qstats_cpu_qlen_inc -> qdisc_qstats_atomic_qlen_inc()
Later (net-next) we might revert this patch by tracking all these
qlen uses and replace them by a more efficient method (not having
to access a precise qlen, but an empty/non_empty status that might
be less expensive to maintain/track).
Another possibility is to have a legacy pfifo_fast version that would
be used when used a a child qdisc, since the parent qdisc needs
a spinlock anyway. But then, future lockless qdiscs would also
have the same problem.
Fixes: 7e66016f2c65 ("net: sched: helpers to sum qlen and qlen for per cpu logic")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS updates for net-next:
1) Add .release_ops to properly unroll .select_ops, use it from nft_compat.
After this change, we can remove list of extensions too to simplify this
codebase.
2) Update amanda conntrack helper to support v3.4, from Florian Tham.
3) Get rid of the obsolete BUGPRINT macro in ebtables, from
Florian Westphal.
4) Merge IPv4 and IPv6 masquerading infrastructure into one single module.
From Florian Westphal.
5) Patchset to remove nf_nat_l3proto structure to get rid of
indirections, from Florian Westphal.
6) Skip unnecessary conntrack timeout updates in case the value is
still the same, also from Florian Westphal.
7) Remove unnecessary 'fall through' comments in empty switch cases,
from Li RongQing.
8) Fix lookup to fixed size hashtable sets on big endian with 32-bit keys.
9) Incorrect logic to deactivate path of fixed size hashtable sets,
element was being tested to self.
10) Remove nft_hash_key(), the bitmap set is always selected for 16-bit
keys.
11) Use boolean whenever possible in IPVS codebase, from Andrea Claudi.
12) Enter close state in conntrack if RST matches exact sequence number,
from Florian Westphal.
13) Initialize dst_cache in tunnel extension, from wenxu.
14) Pass protocol as u16 to xt_check_match and xt_check_target, from
Li RongQing.
15) SCTP header is granted to be in a linear area from IPVS NAT handler,
from Xin Long.
16) Don't steal packets coming from slave VRF device from the
ip_sabotage_in() path, from David Ahern.
17) Fix unsafe update of basechain stats, from Li RongQing.
18) Make sure CONNTRACK_LOCKS is power of 2 to let compiler optimize
modulo operation as bitwise AND, from Li RongQing.
19) Use device_attribute instead of internal definition in the IDLETIMER
target, from Sami Tolvanen.
20) Merge redir, masq and IPv4/IPv6 NAT chain types, from Florian Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Johan Hedberg says:
====================
pull request: bluetooth-next 2019-03-02
Here's one more bluetooth-next pull request for the 5.1 kernel:
- Added support for MediaTek MT7663U and MT7668U UART devices
- Cleanups & fixes to the hci_qca driver
- Fixed wakeup pin behavior for QCA6174A controller
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
This patch adds a new bpf helper BPF_FUNC_skb_ecn_set_ce
"int bpf_skb_ecn_set_ce(struct sk_buff *skb)". It is added to
BPF_PROG_TYPE_CGROUP_SKB typed bpf_prog which currently can
be attached to the ingress and egress path. The helper is needed
because his type of bpf_prog cannot modify the skb directly.
This helper is used to set the ECN field of ECN capable IP packets to ce
(congestion encountered) in the IPv6 or IPv4 header of the skb. It can be
used by a bpf_prog to manage egress or ingress network bandwdith limit
per cgroupv2 by inducing an ECN response in the TCP sender.
This works best when using DCTCP.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
If register_netdev() is failed to register sitn->fb_tunnel_dev,
it will go to err_reg_dev and forget to free netdev(sitn->fb_tunnel_dev).
BUG: memory leak
unreferenced object 0xffff888378daad00 (size 512):
comm "syz-executor.1", pid 4006, jiffies 4295121142 (age 16.115s)
hex dump (first 32 bytes):
00 e6 ed c0 83 88 ff ff 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000d6dcb63e>] kvmalloc include/linux/mm.h:577 [inline]
[<00000000d6dcb63e>] kvzalloc include/linux/mm.h:585 [inline]
[<00000000d6dcb63e>] netif_alloc_netdev_queues net/core/dev.c:8380 [inline]
[<00000000d6dcb63e>] alloc_netdev_mqs+0x600/0xcc0 net/core/dev.c:8970
[<00000000867e172f>] sit_init_net+0x295/0xa40 net/ipv6/sit.c:1848
[<00000000871019fa>] ops_init+0xad/0x3e0 net/core/net_namespace.c:129
[<00000000319507f6>] setup_net+0x2ba/0x690 net/core/net_namespace.c:314
[<0000000087db4f96>] copy_net_ns+0x1dc/0x330 net/core/net_namespace.c:437
[<0000000057efc651>] create_new_namespaces+0x382/0x730 kernel/nsproxy.c:107
[<00000000676f83de>] copy_namespaces+0x2ed/0x3d0 kernel/nsproxy.c:165
[<0000000030b74bac>] copy_process.part.27+0x231e/0x6db0 kernel/fork.c:1919
[<00000000fff78746>] copy_process kernel/fork.c:1713 [inline]
[<00000000fff78746>] _do_fork+0x1bc/0xe90 kernel/fork.c:2224
[<000000001c2e0d1c>] do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:290
[<00000000ec48bd44>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[<0000000039acff8a>] 0xffffffffffffffff
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When calculating the multipath hash for input routes the flow info is
not available and therefore should not be used.
Fixes: 24ba14406c5c ("route: Add multipath_hash in flowi_common to make user-define hash")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Cc: wenxu <wenxu@ucloud.cn>
Acked-by: wenxu <wenxu@ucloud.cn>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For legacy applications using 32bit variable, SO_MAX_PACING_RATE
has to cap the returned value to 0xFFFFFFFF, meaning that
rates above 34.35 Gbit are capped.
This patch allows applications to read socket pacing rate
at full resolution, if they provide a 64bit variable to store it,
and the kernel is 64bit.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
64bit kernels now support 64bit pacing rates.
This commit changes setsockopt() to accept 64bit
values provided by applications.
Old applications providing 32bit value are still supported,
but limited to the old 34Gbit limitation.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are no more in tree users of the
switchdev_trans_item_{dequeue,enqueue} or switchdev_trans_item structure
in the kernel since commit 00fc0c51e35b ("rocker: Change world_ops API
and implementation to be switchdev independant").
Remove this unused code and update the documentation accordingly since.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
devlink suffers from a few kdoc warnings:
net/core/devlink.c:5292: warning: Function parameter or member 'dev' not described in 'devlink_register'
net/core/devlink.c:5351: warning: Function parameter or member 'port_index' not described in 'devlink_port_register'
net/core/devlink.c:5753: warning: Function parameter or member 'parent_resource_id' not described in 'devlink_resource_register'
net/core/devlink.c:5753: warning: Function parameter or member 'size_params' not described in 'devlink_resource_register'
net/core/devlink.c:5753: warning: Excess function parameter 'top_hierarchy' description in 'devlink_resource_register'
net/core/devlink.c:5753: warning: Excess function parameter 'reload_required' description in 'devlink_resource_register'
net/core/devlink.c:5753: warning: Excess function parameter 'parent_reosurce_id' description in 'devlink_resource_register'
net/core/devlink.c:6451: warning: Function parameter or member 'region' not described in 'devlink_region_snapshot_create'
net/core/devlink.c:6451: warning: Excess function parameter 'devlink_region' description in 'devlink_region_snapshot_create'
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For ip rules, we need to use 'ipproto ipv6-icmp' to match ICMPv6 headers.
But for ip -6 route, currently we only support tcp, udp and icmp.
Add ICMPv6 support so we can match ipv6-icmp rules for route lookup.
v2: As David Ahern and Sabrina Dubroca suggested, Add an argument to
rtm_getroute_parse_ip_proto() to handle ICMP/ICMPv6 with different family.
Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes: eacb9384a3fe ("ipv6: support sport, dport and ip_proto in RTM_GETROUTE")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Merge the ipv4 and ipv6 nat chain type. This is the last
missing piece which allows to provide inet family support
for nat in a follow patch.
The kconfig knobs for ipv4/ipv6 nat chain are removed, the
nat chain type will be built unconditionally if NFT_NAT
expression is enabled.
Before:
text data bss dec hex filename
1576 896 0 2472 9a8 nft_chain_nat_ipv4.ko
1697 896 0 2593 a21 nft_chain_nat_ipv6.ko
After:
text data bss dec hex filename
1832 896 0 2728 aa8 nft_chain_nat.ko
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The family specific masq modules are way too small to warrant
an extra module, just place all of them in nft_masq.
before:
text data bss dec hex filename
1001 832 0 1833 729 nft_masq.ko
766 896 0 1662 67e nft_masq_ipv4.ko
764 896 0 1660 67c nft_masq_ipv6.ko
after:
2010 960 0 2970 b9a nft_masq.ko
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
before:
text data bss dec hex filename
990 832 0 1822 71e nft_redir.ko
697 896 0 1593 639 nft_redir_ipv4.ko
713 896 0 1609 649 nft_redir_ipv6.ko
after:
text data bss dec hex filename
1910 960 0 2870 b36 nft_redir.ko
size is reduced, all helpers from nft_redir.ko can be made static.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Use struct device_attribute instead of struct idletimer_tg_attr, and
the correct callback function type to avoid indirect call mismatches
with Control Flow Integrity checking.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
CONNTRACK_LOCKS is divisor when computer array index, if it is power of
2, compiler will optimize modulo operation as bitwise AND, or else
modulo will lower performance.
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Check the result of dereferencing base_chain->stats, instead of result
of this_cpu_ptr with NULL.
base_chain->stats maybe be changed to NULL when a chain is updated and a
new NULL counter can be attached.
And we do not need to check returning of this_cpu_ptr since
base_chain->stats is from percpu allocator if it is non-NULL,
this_cpu_ptr returns a valid value.
And fix two sparse error by replacing rcu_access_pointer and
rcu_dereference with READ_ONCE under rcu_read_lock.
Thanks for Eric's help to finish this patch.
Fixes: 009240940e84c1 ("netfilter: nf_tables: don't assume chain stats are set when jumplabel is set")
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Followup to a173f066c7cf ("netfilter: bridge: Don't sabotage nf_hook
calls from an l3mdev"). Some packets (e.g., ndisc) do not have the skb
device flipped to the l3mdev (e.g., VRF) device. Update ip_sabotage_in
to not drop packets for slave devices too. Currently, neighbor
solicitation packets for 'dev -> bridge (addr) -> vrf' setups are getting
dropped. This patch enables IPv6 communications for bridges with an
address that are enslaved to a VRF.
Fixes: 73e20b761acf ("net: vrf: Add support for PREROUTING rules on vrf device")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
sctp_csum_check() is called by sctp_s/dnat_handler() where it calls
skb_make_writable() to ensure sctphdr to be linearized.
So there's no need to get sctphdr by calling skb_header_pointer()
in sctp_csum_check().
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The proto in struct xt_match and struct xt_target is u16, when
calling xt_check_target/match, their proto argument is u8,
and will cause truncation, it is harmless to ip packet, since
ip proto is u8
if a etable's match/target has proto that is u16, will cause
the check failure.
and convert be16 to short in bridge/netfilter/ebtables.c
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The metadata_dst does not initialize the dst_cache field, this causes
problems to ip_md_tunnel_xmit() since it cannot use this cache, hence,
Triggering a route lookup for every packet.
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
TCP resets cause instant transition from established to closed state
provided the reset is in-window. Endpoints that implement RFC 5961
require resets to match the next expected sequence number.
RST segments that are in-window (but that do not match RCV.NXT) are
ignored, and a "challenge ACK" is sent back.
Main problem for conntrack is that its a middlebox, i.e. whereas an end
host might have ACK'd SEQ (and would thus accept an RST with this
sequence number), conntrack might not have seen this ACK (yet).
Therefore we can't simply flag RSTs with non-exact match as invalid.
This updates RST processing as follows:
1. If the connection is in a state other than ESTABLISHED, nothing is
changed, RST is subject to normal in-window check.
2. If the RSTs sequence number either matches exactly RCV.NXT,
connection state moves to CLOSE.
3. The same applies if the RST sequence number aligns with a previous
packet in the same direction.
In all other cases, the connection remains in ESTABLISHED state.
If the normal-in-window check passes, the timeout will be lowered
to that of CLOSE.
If the peer sends a challenge ack, connection timeout will be reset.
If the challenge ACK triggers another RST (RST was valid after all),
this 2nd RST will match expected sequence and conntrack state changes to
CLOSE.
If no challenge ACK is received, the connection will time out after
CLOSE seconds (10 seconds by default), just like without this patch.
Packetdrill test case:
0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
0.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
0.000 bind(3, ..., ...) = 0
0.000 listen(3, 1) = 0
0.100 < S 0:0(0) win 32792 <mss 1460,sackOK,nop,nop,nop,wscale 7>
0.100 > S. 0:0(0) ack 1 win 64240 <mss 1460,nop,nop,sackOK,nop,wscale 7>
0.200 < . 1:1(0) ack 1 win 257
0.200 accept(3, ..., ...) = 4
// Receive a segment.
0.210 < P. 1:1001(1000) ack 1 win 46
0.210 > . 1:1(0) ack 1001
// Application writes 1000 bytes.
0.250 write(4, ..., 1000) = 1000
0.250 > P. 1:1001(1000) ack 1001
// First reset, old sequence. Conntrack (correctly) considers this
// invalid due to failed window validation (regardless of this patch).
0.260 < R 2:2(0) ack 1001 win 260
// 2nd reset, but too far ahead sequence. Same: correctly handled
// as invalid.
0.270 < R 99990001:99990001(0) ack 1001 win 260
// in-window, but not exact sequence.
// Current Linux kernels might reply with a challenge ack, and do not
// remove connection.
// Without this patch, conntrack state moves to CLOSE.
// With patch, timeout is lowered like CLOSE, but connection stays
// in ESTABLISHED state.
0.280 < R 1010:1010(0) ack 1001 win 260
// Expect challenge ACK
0.281 > . 1001:1001(0) ack 1001 win 501
// With or without this patch, RST will cause connection
// to move to CLOSE (sequence number matches)
// 0.282 < R 1001:1001(0) ack 1001 win 260
// ACK
0.300 < . 1001:1001(0) ack 1001 win 257
// more data could be exchanged here, connection
// is still established
// Client closes the connection.
0.610 < F. 1001:1001(0) ack 1001 win 260
0.650 > . 1001:1001(0) ack 1002
// Close the connection without reading outstanding data
0.700 close(4) = 0
// so one more reset. Will be deemed acceptable with patch as well:
// connection is already closing.
0.701 > R. 1001:1001(0) ack 1002 win 501
// End packetdrill test case.
With patch, this generates following conntrack events:
[NEW] 120 SYN_SENT src=10.0.2.1 dst=10.0.0.1 sport=5437 dport=80 [UNREPLIED]
[UPDATE] 60 SYN_RECV src=10.0.2.1 dst=10.0.0.1 sport=5437 dport=80
[UPDATE] 432000 ESTABLISHED src=10.0.2.1 dst=10.0.0.1 sport=5437 dport=80 [ASSURED]
[UPDATE] 120 FIN_WAIT src=10.0.2.1 dst=10.0.0.1 sport=5437 dport=80 [ASSURED]
[UPDATE] 60 CLOSE_WAIT src=10.0.2.1 dst=10.0.0.1 sport=5437 dport=80 [ASSURED]
[UPDATE] 10 CLOSE src=10.0.2.1 dst=10.0.0.1 sport=5437 dport=80 [ASSURED]
Without patch, first RST moves connection to close, whereas socket state
does not change until FIN is received.
[NEW] 120 SYN_SENT src=10.0.2.1 dst=10.0.0.1 sport=5141 dport=80 [UNREPLIED]
[UPDATE] 60 SYN_RECV src=10.0.2.1 dst=10.0.0.1 sport=5141 dport=80
[UPDATE] 432000 ESTABLISHED src=10.0.2.1 dst=10.0.0.1 sport=5141 dport=80 [ASSURED]
[UPDATE] 10 CLOSE src=10.0.2.1 dst=10.0.0.1 sport=5141 dport=80 [ASSURED]
Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Change the data type of the following variables from int to bool
across ipvs code:
- found
- loop
- need_full_dest
- need_full_svc
- payload_csum
Also change the following functions to use bool full_entry param
instead of int:
- ip_vs_genl_parse_dest()
- ip_vs_genl_parse_service()
This patch does not change any functionality but makes the source
code slightly easier to read.
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Without hardware pnetid support there must currently be a pnet
table configured to determine the IB device port to be used for SMC
RDMA traffic. This patch enables a setup without pnet table, if
the used handshake interface belongs already to a RoCE port.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As per RFC 8033, it is sufficient for the drop probability
decay factor to have a value of (1 - 1/64) instead of 98%.
This avoids the need to do slow division.
Suggested-by: David Laight <David.Laight@aculab.com>
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
According to Documentation/core-api/printk-formats.rst, size_t should be
printed with %zu, rather than %Zu.
In addition, using %Zu triggers a warning on clang (-Wformat-extra-args):
net/sctp/chunk.c:196:25: warning: data argument not used by format string [-Wformat-extra-args]
__func__, asoc, max_data);
~~~~~~~~~~~~~~~~^~~~~~~~~
./include/linux/printk.h:440:49: note: expanded from macro 'pr_warn_ratelimited'
printk_ratelimited(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~
./include/linux/printk.h:424:17: note: expanded from macro 'printk_ratelimited'
printk(fmt, ##__VA_ARGS__); \
~~~ ^
Fixes: 5b5e0928f742 ("lib/vsprintf.c: remove %Z support")
Link: https://github.com/ClangBuiltLinux/linux/issues/378
Signed-off-by: Matthias Maennich <maennich@google.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
David S. Miller
Arnd Bergmann
Eran Ben Elisha
Xin Long
Ido Schimmel
Andy Shevchenko
Boris Pismenny
YueHaibing
Francesco Ruggeri
Ben Dooks
Florian Fainelli
Toke Høiland-Jørgensen
Kevin Darbyshire-Bryant
George Amanakis
Tristram Ha
Eric Dumazet
brakmo
Mao Wenan
Jakub Kicinski
Hangbin Liu
Florian Westphal
Sami Tolvanen
Li RongQing
David Ahern
wenxu
Andrea Claudi
Ursula Braun
Leslie Monis
Matthias Maennich