aboutsummaryrefslogtreecommitdiffstats
path: root/net (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-02-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller5-44/+202
Pablo Neira Ayuso says: ==================== Netfilter fixes for net This batch contains Netfilter fixes for net: 1) Restrict hashlimit size to 1048576, from Cong Wang. 2) Check for offload flags from nf_flow_table_offload_setup(), this fixes a crash in case the hardware offload is disabled. From Florian Westphal. 3) Three preparation patches to extend the conntrack clash resolution, from Florian. 4) Extend clash resolution to deal with DNS packets from the same flow racing to set up the NAT configuration. 5) Small documentation fix in pipapo, from Stefano Brivio. 6) Remove misleading unlikely() from pipapo_refill(), also from Stefano. 7) Reduce hashlimit mutex scope, from Cong Wang. This patch is actually triggering another problem, still under discussion, another patch to fix this will follow up. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-18netfilter: nft_set_pipapo: Don't abuse unlikely() in pipapo_refill()Stefano Brivio1-1/+1
I originally used unlikely() in the if (match_only) clause, which we hit on the mapping table for the last field in a set, to ensure we avoid branching to the rest of for loop body, which is executed more frequently. However, Pablo reports, this is confusing as it gives the impression that this is not a common case, and it's actually not the intended usage of unlikely(). I couldn't observe any statistical difference in matching rates on x864_64 and aarch64 without it, so just drop it. Reported-by: Pablo Neira Ayuso <pablo@netfilter.org> Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-02-18netfilter: nft_set_pipapo: Fix mapping table example in commentsStefano Brivio1-2/+2
In both insertion and lookup examples, the two element pointers of rule mapping tables were swapped. Fix that. Reported-by: Pablo Neira Ayuso <pablo@netfilter.org> Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-02-18flow_table.c: Use built-in RCU list checkingMadhuparna Bhowmik1-2/+4
hlist_for_each_entry_rcu() has built-in RCU and lock checking. Pass cond argument to list_for_each_entry_rcu() to silence false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled by default. Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-18datapath.c: Use built-in RCU list checkingMadhuparna Bhowmik1-3/+6
hlist_for_each_entry_rcu() has built-in RCU and lock checking. Pass cond argument to list_for_each_entry_rcu() to silence false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled by default. Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-18vport.c: Use built-in RCU list checkingMadhuparna Bhowmik1-1/+2
hlist_for_each_entry_rcu() has built-in RCU and lock checking. Pass cond argument to list_for_each_entry_rcu() to silence false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled by default. Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-18meter.c: Use built-in RCU list checkingMadhuparna Bhowmik1-1/+2
hlist_for_each_entry_rcu() has built-in RCU and lock checking. Pass cond argument to list_for_each_entry_rcu() to silence false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled by default. Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-18netlabel_domainhash.c: Use built-in RCU list checkingMadhuparna Bhowmik1-1/+2
list_for_each_entry_rcu() has built-in RCU and lock checking. Pass cond argument to list_for_each_entry_rcu() to silence false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled by default. Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-18net: netlabel: Use built-in RCU list checkingMadhuparna Bhowmik1-1/+2
list_for_each_entry_rcu() has built-in RCU and lock checking. Pass cond argument to list_for_each_entry_rcu() to silence false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled by default. Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-18Revert "net: dev: introduce support for sch BYPASS for lockless qdisc"Paolo Abeni1-20/+2
This reverts commit ba27b4cdaaa66561aaedb2101876e563738d36fe Ahmed reported ouf-of-order issues bisected to commit ba27b4cdaaa6 ("net: dev: introduce support for sch BYPASS for lockless qdisc"). I can't find any working solution other than a plain revert. This will introduce some minor performance regressions for pfifo_fast qdisc. I plan to address them in net-next with more indirect call wrapper boilerplate for qdiscs. Reported-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Fixes: ba27b4cdaaa6 ("net: dev: introduce support for sch BYPASS for lockless qdisc") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-18mptcp: fix bogus socket flag valuesFlorian Westphal1-2/+2
Dan Carpenter reports static checker warnings due to bogus BIT() usage: net/mptcp/subflow.c:571 subflow_write_space() warn: test_bit() takes a bit number net/mptcp/subflow.c:694 subflow_state_change() warn: test_bit() takes a bit number net/mptcp/protocol.c:261 ssk_check_wmem() warn: test_bit() takes a bit number [..] This is harmless (we use bits 1 & 2 instead of 0 and 1), but would break eventually when adding BIT(5) (or 6, depends on size of 'long'). Just use 0 and 1, the values are only passed to test/set/clear_bit functions. Fixes: 648ef4b88673 ("mptcp: Implement MPTCP receive path") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-17sctp: move the format error check out of __sctp_sf_do_9_1_abortXin Long1-9/+20
When T2 timer is to be stopped, the asoc should also be deleted, otherwise, there will be no chance to call sctp_association_free and the asoc could last in memory forever. However, in sctp_sf_shutdown_sent_abort(), after adding the cmd SCTP_CMD_TIMER_STOP for T2 timer, it may return error due to the format error from __sctp_sf_do_9_1_abort() and miss adding SCTP_CMD_ASSOC_FAILED where the asoc will be deleted. This patch is to fix it by moving the format error check out of __sctp_sf_do_9_1_abort(), and do it before adding the cmd SCTP_CMD_TIMER_STOP for T2 timer. Thanks Hangbin for reporting this issue by the fuzz testing. v1->v2: - improve the comment in the code as Marcelo's suggestion. Fixes: 96ca468b86b0 ("sctp: check invalid value of length parameter in error cause") Reported-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-17net: sched: correct flower port blockingJason Baron1-0/+1
tc flower rules that are based on src or dst port blocking are sometimes ineffective due to uninitialized stack data. __skb_flow_dissect() extracts ports from the skb for tc flower to match against. However, the port dissection is not done when when the FLOW_DIS_IS_FRAGMENT bit is set in key_control->flags. All callers of __skb_flow_dissect(), zero-out the key_control field except for fl_classify() as used by the flower classifier. Thus, the FLOW_DIS_IS_FRAGMENT may be set on entry to __skb_flow_dissect(), since key_control is allocated on the stack and may not be initialized. Since key_basic and key_control are present for all flow keys, let's make sure they are initialized. Fixes: 62230715fd24 ("flow_dissector: do not dissect l4 ports for fragments") Co-developed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Jason Baron <jbaron@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-17netfilter: conntrack: allow insertion of clashing entriesFlorian Westphal2-6/+90
This patch further relaxes the need to drop an skb due to a clash with an existing conntrack entry. Current clash resolution handles the case where the clash occurs between two identical entries (distinct nf_conn objects with same tuples), i.e.: Original Reply existing: 10.2.3.4:42 -> 10.8.8.8:53 10.2.3.4:42 <- 10.0.0.6:5353 clashing: 10.2.3.4:42 -> 10.8.8.8:53 10.2.3.4:42 <- 10.0.0.6:5353 ... existing handling will discard the unconfirmed clashing entry and makes skb->_nfct point to the existing one. The skb can then be processed normally just as if the clash would not have existed in the first place. For other clashes, the skb needs to be dropped. This frequently happens with DNS resolvers that send A and AAAA queries back-to-back when NAT rules are present that cause packets to get different DNAT transformations applied, for example: -m statistics --mode random ... -j DNAT --dnat-to 10.0.0.6:5353 -m statistics --mode random ... -j DNAT --dnat-to 10.0.0.7:5353 In this case the A or AAAA query is dropped which incurs a costly delay during name resolution. This patch also allows this collision type: Original Reply existing: 10.2.3.4:42 -> 10.8.8.8:53 10.2.3.4:42 <- 10.0.0.6:5353 clashing: 10.2.3.4:42 -> 10.8.8.8:53 10.2.3.4:42 <- 10.0.0.7:5353 In this case, clash is in original direction -- the reply direction is still unique. The change makes it so that when the 2nd colliding packet is received, the clashing conntrack is tagged with new IPS_NAT_CLASH_BIT, gets a fixed 1 second timeout and is inserted in the reply direction only. The entry is hidden from 'conntrack -L', it will time out quickly and it can be early dropped because it will never progress to the ASSURED state. To avoid special-casing the delete code path to special case the ORIGINAL hlist_nulls node, a new helper, "hlist_nulls_add_fake", is added so hlist_nulls_del() will work. Example: CPU A: CPU B: 1. 10.2.3.4:42 -> 10.8.8.8:53 (A) 2. 10.2.3.4:42 -> 10.8.8.8:53 (AAAA) 3. Apply DNAT, reply changed to 10.0.0.6 4. 10.2.3.4:42 -> 10.8.8.8:53 (AAAA) 5. Apply DNAT, reply changed to 10.0.0.7 6. confirm/commit to conntrack table, no collisions 7. commit clashing entry Reply comes in: 10.2.3.4:42 <- 10.0.0.6:5353 (A) -> Finds a conntrack, DNAT is reversed & packet forwarded to 10.2.3.4:42 10.2.3.4:42 <- 10.0.0.7:5353 (AAAA) -> Finds a conntrack, DNAT is reversed & packet forwarded to 10.2.3.4:42 The conntrack entry is deleted from table, as it has the NAT_CLASH bit set. In case of a retransmit from ORIGINAL dir, all further packets will get the DNAT transformation to 10.0.0.6. I tried to come up with other solutions but they all have worse problems. Alternatives considered were: 1. Confirm ct entries at allocation time, not in postrouting. a. will cause uneccesarry work when the skb that creates the conntrack is dropped by ruleset. b. in case nat is applied, ct entry would need to be moved in the table, which requires another spinlock pair to be taken. c. breaks the 'unconfirmed entry is private to cpu' assumption: we would need to guard all nfct->ext allocation requests with ct->lock spinlock. 2. Make the unconfirmed list a hash table instead of a pcpu list. Shares drawback c) of the first alternative. 3. Document this is expected and force users to rearrange their ruleset (e.g. by using "-m cluster" instead of "-m statistics"). nft has the 'jhash' expression which can be used instead of 'numgen'. Major drawback: doesn't fix what I consider a bug, not very realistic and I believe its reasonable to have the existing rulesets to 'just work'. 4. Document this is expected and force users to steer problematic packets to the same CPU -- this would serialize the "allocate new conntrack entry/nat table evaluation/perform nat/confirm entry", so no race can occur. Similar drawback to 3. Another advantage of this patch compared to 1) and 2) is that there are no changes to the hot path; things are handled in the udp tracker and the clash resolution path. Cc: rcu@vger.kernel.org Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-02-16skbuff: remove stale bit mask commentsRandy Dunlap1-2/+0
Remove stale comments since this flag is no longer a bit mask but is a bit field. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-16mptcp: select CRYPTOMatthieu Baerts1-0/+1
Without this modification and if CRYPTO is not selected, we have this warning: WARNING: unmet direct dependencies detected for CRYPTO_LIB_SHA256 Depends on [n]: CRYPTO [=n] Selected by [y]: - MPTCP [=y] && NET [=y] && INET [=y] MPTCP selects CRYPTO_LIB_SHA256 which seems to depend on CRYPTO. CRYPTO is now selected to avoid this issue. Even though the config system prints that warning, it looks like sha256.c is compiled and linked even without CONFIG_CRYPTO. Since MPTCP will end up needing CONFIG_CRYPTO anyway in future commits -- currently in preparation for net-next -- we propose to add it now to fix the warning. The dependency in the config system comes from the fact that CRYPTO_LIB_SHA256 is defined in "lib/crypto/Kconfig" which is sourced from "crypto/Kconfig" only if CRYPTO is selected. Fixes: 65492c5a6ab5 (mptcp: move from sha1 (v0) to sha256 (v1)) Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-16net: export netdev_next_lower_dev_rcu()Taehee Yoo1-3/+3
netdev_next_lower_dev_rcu() will be used to implement a function, which is to walk all lower interfaces. There are already functions that they walk their lower interface. (netdev_walk_all_lower_dev_rcu, netdev_walk_all_lower_dev()). But, there would be cases that couldn't be covered by given netdev_walk_all_lower_dev_{rcu}() function. So, some modules would want to implement own function, which is to walk all lower interfaces. In the next patch, netdev_next_lower_dev_rcu() will be used. In addition, this patch removes two unused prototypes in netdevice.h. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-16ethtool: fix application of verbose no_mask bitsetMichal Kubecek1-0/+3
A bitset without mask in a _SET request means we want exactly the bits in the bitset to be set. This works correctly for compact format but when verbose format is parsed, ethnl_update_bitset32_verbose() only sets the bits present in the request bitset but does not clear the rest. This can cause incorrect results like lion:~ # ethtool eth0 | grep Wake Supports Wake-on: pumbg Wake-on: g lion:~ # ethtool -s eth0 wol u lion:~ # ethtool eth0 | grep Wake Supports Wake-on: pumbg Wake-on: ug when the second ethtool command issues request ETHTOOL_MSG_WOL_SET ETHTOOL_A_WOL_HEADER ETHTOOL_A_HEADER_DEV_NAME = "eth0" ETHTOOL_A_WOL_MODES ETHTOOL_A_BITSET_NOMASK ETHTOOL_A_BITSET_BITS ETHTOOL_A_BITSET_BITS_BIT ETHTOOL_BITSET_BIT_INDEX = 1 Fix the logic by clearing the whole target bitmap before we start iterating through the request bits. Fixes: 10b518d4e6dd ("ethtool: netlink bitset handling") Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-16mptcp: Protect subflow socket options before connection completesMat Martineau1-29/+19
Userspace should not be able to directly manipulate subflow socket options before a connection is established since it is not yet known if it will be an MPTCP subflow or a TCP fallback subflow. TCP fallback subflows can be more directly controlled by userspace because they are regular TCP connections, while MPTCP subflow sockets need to be configured for the specific needs of MPTCP. Use the same logic as sendmsg/recvmsg to ensure that socket option calls are only passed through to known TCP fallback subflows. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-16net: add strict checks in netdev_name_node_alt_destroy()Eric Dumazet1-0/+6
netdev_name_node_alt_destroy() does a lookup over all device names of a namespace. We need to make sure the name belongs to the device of interest, and that we do not destroy its primary name, since we rely on it being not deleted : dev->name_node would indeed point to freed memory. syzbot report was the following : BUG: KASAN: use-after-free in dev_net include/linux/netdevice.h:2206 [inline] BUG: KASAN: use-after-free in mld_force_mld_version net/ipv6/mcast.c:1172 [inline] BUG: KASAN: use-after-free in mld_in_v2_mode_only net/ipv6/mcast.c:1180 [inline] BUG: KASAN: use-after-free in mld_in_v1_mode+0x203/0x230 net/ipv6/mcast.c:1190 Read of size 8 at addr ffff88809886c588 by task swapper/1/0 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.6.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374 __kasan_report.cold+0x1b/0x32 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:641 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135 dev_net include/linux/netdevice.h:2206 [inline] mld_force_mld_version net/ipv6/mcast.c:1172 [inline] mld_in_v2_mode_only net/ipv6/mcast.c:1180 [inline] mld_in_v1_mode+0x203/0x230 net/ipv6/mcast.c:1190 mld_send_initial_cr net/ipv6/mcast.c:2083 [inline] mld_dad_timer_expire+0x24/0x230 net/ipv6/mcast.c:2118 call_timer_fn+0x1ac/0x780 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0x6c3/0x1790 kernel/time/timer.c:1786 __do_softirq+0x262/0x98c kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0x19b/0x1e0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:546 [inline] smp_apic_timer_interrupt+0x1a3/0x610 arch/x86/kernel/apic/apic.c:1146 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829 </IRQ> RIP: 0010:native_safe_halt+0xe/0x10 arch/x86/include/asm/irqflags.h:61 Code: 68 73 c5 f9 eb 8a cc cc cc cc cc cc e9 07 00 00 00 0f 00 2d 94 be 59 00 f4 c3 66 90 e9 07 00 00 00 0f 00 2d 84 be 59 00 fb f4 <c3> cc 55 48 89 e5 41 57 41 56 41 55 41 54 53 e8 de 2a 74 f9 e8 09 RSP: 0018:ffffc90000d3fd68 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff13 RAX: 1ffffffff136761a RBX: ffff8880a99fc340 RCX: 0000000000000000 RDX: dffffc0000000000 RSI: 0000000000000006 RDI: ffff8880a99fcbd4 RBP: ffffc90000d3fd98 R08: ffff8880a99fc340 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: dffffc0000000000 R13: ffffffff8aa5a1c0 R14: 0000000000000000 R15: 0000000000000001 arch_cpu_idle+0xa/0x10 arch/x86/kernel/process.c:686 default_idle_call+0x84/0xb0 kernel/sched/idle.c:94 cpuidle_idle_call kernel/sched/idle.c:154 [inline] do_idle+0x3c8/0x6e0 kernel/sched/idle.c:269 cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:361 start_secondary+0x2f4/0x410 arch/x86/kernel/smpboot.c:264 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:242 Allocated by task 10229: save_stack+0x23/0x90 mm/kasan/common.c:72 set_track mm/kasan/common.c:80 [inline] __kasan_kmalloc mm/kasan/common.c:515 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:488 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:529 __do_kmalloc_node mm/slab.c:3616 [inline] __kmalloc_node+0x4e/0x70 mm/slab.c:3623 kmalloc_node include/linux/slab.h:578 [inline] kvmalloc_node+0x68/0x100 mm/util.c:574 kvmalloc include/linux/mm.h:645 [inline] kvzalloc include/linux/mm.h:653 [inline] alloc_netdev_mqs+0x98/0xe40 net/core/dev.c:9797 rtnl_create_link+0x22d/0xaf0 net/core/rtnetlink.c:3047 __rtnl_newlink+0xf9f/0x1790 net/core/rtnetlink.c:3309 rtnl_newlink+0x69/0xa0 net/core/rtnetlink.c:3377 rtnetlink_rcv_msg+0x45e/0xaf0 net/core/rtnetlink.c:5438 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5456 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0x59e/0x7e0 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:672 __sys_sendto+0x262/0x380 net/socket.c:1998 __do_compat_sys_socketcall net/compat.c:771 [inline] __se_compat_sys_socketcall net/compat.c:719 [inline] __ia32_compat_sys_socketcall+0x530/0x710 net/compat.c:719 do_syscall_32_irqs_on arch/x86/entry/common.c:337 [inline] do_fast_syscall_32+0x27b/0xe16 arch/x86/entry/common.c:408 entry_SYSENTER_compat+0x70/0x7f arch/x86/entry/entry_64_compat.S:139 Freed by task 10229: save_stack+0x23/0x90 mm/kasan/common.c:72 set_track mm/kasan/common.c:80 [inline] kasan_set_free_info mm/kasan/common.c:337 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:476 kasan_slab_free+0xe/0x10 mm/kasan/common.c:485 __cache_free mm/slab.c:3426 [inline] kfree+0x10a/0x2c0 mm/slab.c:3757 __netdev_name_node_alt_destroy+0x1ff/0x2a0 net/core/dev.c:322 netdev_name_node_alt_destroy+0x57/0x80 net/core/dev.c:334 rtnl_alt_ifname net/core/rtnetlink.c:3518 [inline] rtnl_linkprop.isra.0+0x575/0x6f0 net/core/rtnetlink.c:3567 rtnl_dellinkprop+0x46/0x60 net/core/rtnetlink.c:3588 rtnetlink_rcv_msg+0x45e/0xaf0 net/core/rtnetlink.c:5438 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5456 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0x59e/0x7e0 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:672 ____sys_sendmsg+0x753/0x880 net/socket.c:2343 ___sys_sendmsg+0x100/0x170 net/socket.c:2397 __sys_sendmsg+0x105/0x1d0 net/socket.c:2430 __compat_sys_sendmsg net/compat.c:642 [inline] __do_compat_sys_sendmsg net/compat.c:649 [inline] __se_compat_sys_sendmsg net/compat.c:646 [inline] __ia32_compat_sys_sendmsg+0x7a/0xb0 net/compat.c:646 do_syscall_32_irqs_on arch/x86/entry/common.c:337 [inline] do_fast_syscall_32+0x27b/0xe16 arch/x86/entry/common.c:408 entry_SYSENTER_compat+0x70/0x7f arch/x86/entry/entry_64_compat.S:139 The buggy address belongs to the object at ffff88809886c000 which belongs to the cache kmalloc-4k of size 4096 The buggy address is located 1416 bytes inside of 4096-byte region [ffff88809886c000, ffff88809886d000) The buggy address belongs to the page: page:ffffea0002621b00 refcount:1 mapcount:0 mapping:ffff8880aa402000 index:0x0 compound_mapcount: 0 flags: 0xfffe0000010200(slab|head) raw: 00fffe0000010200 ffffea0002610d08 ffffea0002607608 ffff8880aa402000 raw: 0000000000000000 ffff88809886c000 0000000100000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88809886c480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88809886c500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff88809886c580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88809886c600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88809886c680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 36fbf1e52bd3 ("net: rtnetlink: add linkprop commands to add and delete alternative ifnames") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Jiri Pirko <jiri@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-16net: rtnetlink: fix bugs in rtnl_alt_ifname()Eric Dumazet1-14/+12
Since IFLA_ALT_IFNAME is an NLA_STRING, we have no guarantee it is nul terminated. We should use nla_strdup() instead of kstrdup(), since this helper will make sure not accessing out-of-bounds data. BUG: KMSAN: uninit-value in strlen+0x5e/0xa0 lib/string.c:535 CPU: 1 PID: 19157 Comm: syz-executor.5 Not tainted 5.5.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 strlen+0x5e/0xa0 lib/string.c:535 kstrdup+0x7f/0x1a0 mm/util.c:59 rtnl_alt_ifname net/core/rtnetlink.c:3495 [inline] rtnl_linkprop+0x85d/0xc00 net/core/rtnetlink.c:3553 rtnl_newlinkprop+0x9d/0xb0 net/core/rtnetlink.c:3568 rtnetlink_rcv_msg+0x1153/0x1570 net/core/rtnetlink.c:5424 netlink_rcv_skb+0x451/0x650 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:5442 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0xf9e/0x1100 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x1248/0x14d0 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg net/socket.c:659 [inline] ____sys_sendmsg+0x12b6/0x1350 net/socket.c:2330 ___sys_sendmsg net/socket.c:2384 [inline] __sys_sendmsg+0x451/0x5f0 net/socket.c:2417 __do_sys_sendmsg net/socket.c:2426 [inline] __se_sys_sendmsg+0x97/0xb0 net/socket.c:2424 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45b3b9 Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ff1c7b1ac78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007ff1c7b1b6d4 RCX: 000000000045b3b9 RDX: 0000000000000000 RSI: 0000000020000040 RDI: 0000000000000003 RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000009cb R14: 00000000004cb3dd R15: 000000000075bf2c Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline] kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:82 slab_alloc_node mm/slub.c:2774 [inline] __kmalloc_node_track_caller+0xb40/0x1200 mm/slub.c:4382 __kmalloc_reserve net/core/skbuff.c:141 [inline] __alloc_skb+0x2fd/0xac0 net/core/skbuff.c:209 alloc_skb include/linux/skbuff.h:1049 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1174 [inline] netlink_sendmsg+0x7d3/0x14d0 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg net/socket.c:659 [inline] ____sys_sendmsg+0x12b6/0x1350 net/socket.c:2330 ___sys_sendmsg net/socket.c:2384 [inline] __sys_sendmsg+0x451/0x5f0 net/socket.c:2417 __do_sys_sendmsg net/socket.c:2426 [inline] __se_sys_sendmsg+0x97/0xb0 net/socket.c:2424 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 36fbf1e52bd3 ("net: rtnetlink: add linkprop commands to add and delete alternative ifnames") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jiri Pirko <jiri@mellanox.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-16net: fib_rules: Correctly set table field when table number exceeds 8 bitsJethro Beekman1-1/+1
In 709772e6e06564ed94ba740de70185ac3d792773, RT_TABLE_COMPAT was added to allow legacy software to deal with routing table numbers >= 256, but the same change to FIB rule queries was overlooked. Signed-off-by: Jethro Beekman <jethro@fortanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-16net/rds: Track user mapped pages through special APILeon Romanovsky1-12/+12
Convert net/rds to use the newly introduces pin_user_pages() API, which properly sets FOLL_PIN. Setting FOLL_PIN is now required for code that requires tracking of pinned pages. Note that this effectively changes the code's behavior: it now ultimately calls set_page_dirty_lock(), instead of set_page_dirty(). This is probably more accurate. As Christoph Hellwig put it, "set_page_dirty() is only safe if we are dealing with a file backed page where we have reference on the inode it hangs off." [1] [1] https://lore.kernel.org/r/20190723153640.GB720@lst.de Cc: Hans Westgaard Ry <hans.westgaard.ry@oracle.com> Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: John Hubbard <jhubbard@nvidia.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-16ipv6: Fix nlmsg_flags when splitting a multipath routeBenjamin Poirier1-0/+1
When splitting an RTA_MULTIPATH request into multiple routes and adding the second and later components, we must not simply remove NLM_F_REPLACE but instead replace it by NLM_F_CREATE. Otherwise, it may look like the netlink message was malformed. For example, ip route add 2001:db8::1/128 dev dummy0 ip route change 2001:db8::1/128 nexthop via fe80::30:1 dev dummy0 \ nexthop via fe80::30:2 dev dummy0 results in the following warnings: [ 1035.057019] IPv6: RTM_NEWROUTE with no NLM_F_CREATE or NLM_F_REPLACE [ 1035.057517] IPv6: NLM_F_CREATE should be set when creating new route This patch makes the nlmsg sequence look equivalent for __ip6_ins_rt() to what it would get if the multipath route had been added in multiple netlink operations: ip route add 2001:db8::1/128 dev dummy0 ip route change 2001:db8::1/128 nexthop via fe80::30:1 dev dummy0 ip route append 2001:db8::1/128 nexthop via fe80::30:2 dev dummy0 Fixes: 27596472473a ("ipv6: fix ECMP route replacement") Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-16ipv6: Fix route replacement with dev-only routeBenjamin Poirier1-3/+4
After commit 27596472473a ("ipv6: fix ECMP route replacement") it is no longer possible to replace an ECMP-able route by a non ECMP-able route. For example, ip route add 2001:db8::1/128 via fe80::1 dev dummy0 ip route replace 2001:db8::1/128 dev dummy0 does not work as expected. Tweak the replacement logic so that point 3 in the log of the above commit becomes: 3. If the new route is not ECMP-able, and no matching non-ECMP-able route exists, replace matching ECMP-able route (if any) or add the new route. We can now summarize the entire replace semantics to: When doing a replace, prefer replacing a matching route of the same "ECMP-able-ness" as the replace argument. If there is no such candidate, fallback to the first route found. Fixes: 27596472473a ("ipv6: fix ECMP route replacement") Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds22-66/+184
Pull networking fixes from David Miller: 1) Fix interrupt name truncation in mv88e6xxx dsa driver, from Andrew Lunn. 2) Process generic XDP even if SKB is cloned, from Toke Høiland-Jørgensen. 3) Fix leak of kernel memory to userspace in smc, from Eric Dumazet. 4) Add some missing netlink attribute validation to matchall and flower, from Davide Caratti. 5) Send icmp responses properly when NAT has been applied to the frame before we get to the tunnel emitting the icmp, from Jason Donenfeld. 6) Make sure there is enough SKB headroom when adding dsa tags for qca and ar9331. From Per Forlin. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits) netdevice.h: fix all kernel-doc and Sphinx warnings net: dsa: tag_ar9331: Make sure there is headroom for tag net: dsa: tag_qca: Make sure there is headroom for tag net, ip6_tunnel: enhance tunnel locate with link check net/smc: no peer ID in CLC decline for SMCD net/smc: transfer fasync_list in case of fallback net: hns3: fix a copying IPv6 address error in hclge_fd_get_flow_tuples() net: hns3: fix VF bandwidth does not take effect in some case net: hns3: add management table after IMP reset mac80211: fix wrong 160/80+80 MHz setting cfg80211: add missing policy for NL80211_ATTR_STATUS_CODE xfrm: interface: use icmp_ndo_send helper wireguard: device: use icmp_ndo_send helper sunvnet: use icmp_ndo_send helper gtp: use icmp_ndo_send helper icmp: introduce helper for nat'd source address in network device context net/sched: flower: add missing validation of TCA_FLOWER_FLAGS net/sched: matchall: add missing validation of TCA_MATCHALL_FLAGS net/flow_dissector: remove unexist field description page_pool: refill page when alloc.count of pool is zero ...
2020-02-14net: dsa: tag_ar9331: Make sure there is headroom for tagPer Forlin1-1/+1
Passing tag size to skb_cow_head will make sure there is enough headroom for the tag data. This change does not introduce any overhead in case there is already available headroom for tag. Signed-off-by: Per Forlin <perfn@axis.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14net: dsa: tag_qca: Make sure there is headroom for tagPer Forlin1-1/+1
Passing tag size to skb_cow_head will make sure there is enough headroom for the tag data. This change does not introduce any overhead in case there is already available headroom for tag. Signed-off-by: Per Forlin <perfn@axis.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14net, ip6_tunnel: enhance tunnel locate with link checkWilliam Dauchy1-21/+47
With ipip, it is possible to create an extra interface explicitly attached to a given physical interface: # ip link show tunl0 4: tunl0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ipip 0.0.0.0 brd 0.0.0.0 # ip link add tunl1 type ipip dev eth0 # ip link show tunl1 6: tunl1@eth0: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ipip 0.0.0.0 brd 0.0.0.0 But it is not possible with ip6tnl: # ip link show ip6tnl0 5: ip6tnl0@NONE: <NOARP> mtu 1452 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/tunnel6 :: brd :: # ip link add ip6tnl1 type ip6tnl dev eth0 RTNETLINK answers: File exists This patch aims to make it possible by adding link comparaison in both tunnel locate and lookup functions; we also modify mtu calculation when attached to an interface with a lower mtu. This permits to make use of x-netns communication by moving the newly created tunnel in a given netns. Signed-off-by: William Dauchy <w.dauchy@criteo.com> Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14Merge tag 'mac80211-for-net-2020-02-14' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211David S. Miller6-16/+39
Johannes Berg says: ==================== Just a few fixes: * avoid running out of tracking space for frames that need to be reported to userspace by using more bits * fix beacon handling suppression by adding some relevant elements to the CRC calculation * fix quiet mode in action frames * fix crash in ethtool for virt_wifi and similar * add a missing policy entry * fix 160 & 80+80 bandwidth to take local capabilities into account ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14net/smc: no peer ID in CLC decline for SMCDUrsula Braun1-1/+3
Just SMCR requires a CLC Peer ID, but not SMCD. The field should be zero for SMCD. Fixes: c758dfddc1b5 ("net/smc: add SMC-D support in CLC messages") Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14net/smc: transfer fasync_list in case of fallbackUrsula Braun1-0/+2
SMC does not work together with FASTOPEN. If sendmsg() is called with flag MSG_FASTOPEN in SMC_INIT state, the SMC-socket switches to fallback mode. To handle the previous ioctl FIOASYNC call correctly in this case, it is necessary to transfer the socket wait queue fasync_list to the internal TCP socket. Reported-by: syzbot+4b1fe8105f8044a26162@syzkaller.appspotmail.com Fixes: ee9dfbef02d18 ("net/smc: handle sockopts forcing fallback") Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14mac80211: fix wrong 160/80+80 MHz settingShay Bar1-2/+14
Before this patch, STA's would set new width of 160/80+80 MHz based on AP capability only. This is wrong because STA may not support > 80MHz BW. Fix is to verify STA has 160/80+80 MHz capability before increasing its width to > 80MHz. The "support_80_80" and "support_160" setting is based on: "Table 9-272 — Setting of the Supported Channel Width Set subfield and Extended NSS BW Support subfield at a STA transmitting the VHT Capabilities Information field" From "Draft P802.11REVmd_D3.0.pdf" Signed-off-by: Aviad Brikman <aviad.brikman@celeno.com> Signed-off-by: Shay Bar <shay.bar@celeno.com> Link: https://lore.kernel.org/r/20200210130728.23674-1-shay.bar@celeno.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-14cfg80211: add missing policy for NL80211_ATTR_STATUS_CODESergey Matyukevich1-0/+1
The nl80211_policy is missing for NL80211_ATTR_STATUS_CODE attribute. As a result, for strictly validated commands, it's assumed to not be supported. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20200213131608.10541-2-sergey.matyukevich.os@quantenna.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-13xfrm: interface: use icmp_ndo_send helperJason A. Donenfeld1-3/+3
Because xfrmi is calling icmp from network device context, it should use the ndo helper so that the rate limiting applies correctly. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-13icmp: introduce helper for nat'd source address in network device contextJason A. Donenfeld2-0/+67
This introduces a helper function to be called only by network drivers that wraps calls to icmp[v6]_send in a conntrack transformation, in case NAT has been used. We don't want to pollute the non-driver path, though, so we introduce this as a helper to be called by places that actually make use of this, as suggested by Florian. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-13net/sched: flower: add missing validation of TCA_FLOWER_FLAGSDavide Caratti1-0/+1
unlike other classifiers that can be offloaded (i.e. users can set flags like 'skip_hw' and 'skip_sw'), 'cls_flower' doesn't validate the size of netlink attribute 'TCA_FLOWER_FLAGS' provided by user: add a proper entry to fl_policy. Fixes: 5b33f48842fa ("net/flower: Introduce hardware offload support") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-13net/sched: matchall: add missing validation of TCA_MATCHALL_FLAGSDavide Caratti1-0/+1
unlike other classifiers that can be offloaded (i.e. users can set flags like 'skip_hw' and 'skip_sw'), 'cls_matchall' doesn't validate the size of netlink attribute 'TCA_MATCHALL_FLAGS' provided by user: add a proper entry to mall_policy. Fixes: b87f7936a932 ("net/sched: Add match-all classifier hw offloading.") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-13page_pool: refill page when alloc.count of pool is zeroLi RongQing1-14/+8
"do {} while" in page_pool_refill_alloc_cache will always refill page once whether refill is true or false, and whether alloc.count of pool is less than PP_ALLOC_CACHE_REFILL or not this is wrong, and will cause overflow of pool->alloc.cache the caller of __page_pool_get_cached should provide guarantee that pool->alloc.cache is safe to access, so in_serving_softirq should be removed as suggested by Jesper Dangaard Brouer in https://patchwork.ozlabs.org/patch/1233713/ so fix this issue by calling page_pool_refill_alloc_cache() only when pool->alloc.count is zero Fixes: 44768decb7c0 ("page_pool: handle page recycle for NUMA_NO_NODE condition") Signed-off-by: Li RongQing <lirongqing@baidu.com> Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-11net/smc: fix leak of kernel memory to user spaceEric Dumazet1-3/+2
As nlmsg_put() does not clear the memory that is reserved, it this the caller responsability to make sure all of this memory will be written, in order to not reveal prior content. While we are at it, we can provide the socket cookie even if clsock is not set. syzbot reported : BUG: KMSAN: uninit-value in __arch_swab32 arch/x86/include/uapi/asm/swab.h:10 [inline] BUG: KMSAN: uninit-value in __fswab32 include/uapi/linux/swab.h:59 [inline] BUG: KMSAN: uninit-value in __swab32p include/uapi/linux/swab.h:179 [inline] BUG: KMSAN: uninit-value in __be32_to_cpup include/uapi/linux/byteorder/little_endian.h:82 [inline] BUG: KMSAN: uninit-value in get_unaligned_be32 include/linux/unaligned/access_ok.h:30 [inline] BUG: KMSAN: uninit-value in ____bpf_skb_load_helper_32 net/core/filter.c:240 [inline] BUG: KMSAN: uninit-value in ____bpf_skb_load_helper_32_no_cache net/core/filter.c:255 [inline] BUG: KMSAN: uninit-value in bpf_skb_load_helper_32_no_cache+0x14a/0x390 net/core/filter.c:252 CPU: 1 PID: 5262 Comm: syz-executor.5 Not tainted 5.5.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 __arch_swab32 arch/x86/include/uapi/asm/swab.h:10 [inline] __fswab32 include/uapi/linux/swab.h:59 [inline] __swab32p include/uapi/linux/swab.h:179 [inline] __be32_to_cpup include/uapi/linux/byteorder/little_endian.h:82 [inline] get_unaligned_be32 include/linux/unaligned/access_ok.h:30 [inline] ____bpf_skb_load_helper_32 net/core/filter.c:240 [inline] ____bpf_skb_load_helper_32_no_cache net/core/filter.c:255 [inline] bpf_skb_load_helper_32_no_cache+0x14a/0x390 net/core/filter.c:252 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline] kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127 kmsan_kmalloc_large+0x73/0xc0 mm/kmsan/kmsan_hooks.c:128 kmalloc_large_node_hook mm/slub.c:1406 [inline] kmalloc_large_node+0x282/0x2c0 mm/slub.c:3841 __kmalloc_node_track_caller+0x44b/0x1200 mm/slub.c:4368 __kmalloc_reserve net/core/skbuff.c:141 [inline] __alloc_skb+0x2fd/0xac0 net/core/skbuff.c:209 alloc_skb include/linux/skbuff.h:1049 [inline] netlink_dump+0x44b/0x1ab0 net/netlink/af_netlink.c:2224 __netlink_dump_start+0xbb2/0xcf0 net/netlink/af_netlink.c:2352 netlink_dump_start include/linux/netlink.h:233 [inline] smc_diag_handler_dump+0x2ba/0x300 net/smc/smc_diag.c:242 sock_diag_rcv_msg+0x211/0x610 net/core/sock_diag.c:256 netlink_rcv_skb+0x451/0x650 net/netlink/af_netlink.c:2477 sock_diag_rcv+0x63/0x80 net/core/sock_diag.c:275 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0xf9e/0x1100 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x1248/0x14d0 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg net/socket.c:659 [inline] kernel_sendmsg+0x433/0x440 net/socket.c:679 sock_no_sendpage+0x235/0x300 net/core/sock.c:2740 kernel_sendpage net/socket.c:3776 [inline] sock_sendpage+0x1e1/0x2c0 net/socket.c:937 pipe_to_sendpage+0x38c/0x4c0 fs/splice.c:458 splice_from_pipe_feed fs/splice.c:512 [inline] __splice_from_pipe+0x539/0xed0 fs/splice.c:636 splice_from_pipe fs/splice.c:671 [inline] generic_splice_sendpage+0x1d5/0x2d0 fs/splice.c:844 do_splice_from fs/splice.c:863 [inline] do_splice fs/splice.c:1170 [inline] __do_sys_splice fs/splice.c:1447 [inline] __se_sys_splice+0x2380/0x3350 fs/splice.c:1427 __x64_sys_splice+0x6e/0x90 fs/splice.c:1427 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: f16a7dd5cf27 ("smc: netlink interface for SMC sockets") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-11core: Don't skip generic XDP program execution for cloned SKBsToke Høiland-Jørgensen1-2/+2
The current generic XDP handler skips execution of XDP programs entirely if an SKB is marked as cloned. This leads to some surprising behaviour, as packets can end up being cloned in various ways, which will make an XDP program not see all the traffic on an interface. This was discovered by a simple test case where an XDP program that always returns XDP_DROP is installed on a veth device. When combining this with the Scapy packet sniffer (which uses an AF_PACKET) socket on the sending side, SKBs reliably end up in the cloned state, causing them to be passed through to the receiving interface instead of being dropped. A minimal reproducer script for this is included below. This patch fixed the issue by simply triggering the existing linearisation code for cloned SKBs instead of skipping the XDP program execution. This behaviour is in line with the behaviour of the native XDP implementation for the veth driver, which will reallocate and copy the SKB data if the SKB is marked as shared. Reproducer Python script (requires BCC and Scapy): from scapy.all import TCP, IP, Ether, sendp, sniff, AsyncSniffer, Raw, UDP from bcc import BPF import time, sys, subprocess, shlex SKB_MODE = (1 << 1) DRV_MODE = (1 << 2) PYTHON=sys.executable def client(): time.sleep(2) # Sniffing on the sender causes skb_cloned() to be set s = AsyncSniffer() s.start() for p in range(10): sendp(Ether(dst="aa:aa:aa:aa:aa:aa", src="cc:cc:cc:cc:cc:cc")/IP()/UDP()/Raw("Test"), verbose=False) time.sleep(0.1) s.stop() return 0 def server(mode): prog = BPF(text="int dummy_drop(struct xdp_md *ctx) {return XDP_DROP;}") func = prog.load_func("dummy_drop", BPF.XDP) prog.attach_xdp("a_to_b", func, mode) time.sleep(1) s = sniff(iface="a_to_b", count=10, timeout=15) if len(s): print(f"Got {len(s)} packets - should have gotten 0") return 1 else: print("Got no packets - as expected") return 0 if len(sys.argv) < 2: print(f"Usage: {sys.argv[0]} <skb|drv>") sys.exit(1) if sys.argv[1] == "client": sys.exit(client()) elif sys.argv[1] == "server": mode = SKB_MODE if sys.argv[2] == 'skb' else DRV_MODE sys.exit(server(mode)) else: try: mode = sys.argv[1] if mode not in ('skb', 'drv'): print(f"Usage: {sys.argv[0]} <skb|drv>") sys.exit(1) print(f"Running in {mode} mode") for cmd in [ 'ip netns add netns_a', 'ip netns add netns_b', 'ip -n netns_a link add a_to_b type veth peer name b_to_a netns netns_b', # Disable ipv6 to make sure there's no address autoconf traffic 'ip netns exec netns_a sysctl -qw net.ipv6.conf.a_to_b.disable_ipv6=1', 'ip netns exec netns_b sysctl -qw net.ipv6.conf.b_to_a.disable_ipv6=1', 'ip -n netns_a link set dev a_to_b address aa:aa:aa:aa:aa:aa', 'ip -n netns_b link set dev b_to_a address cc:cc:cc:cc:cc:cc', 'ip -n netns_a link set dev a_to_b up', 'ip -n netns_b link set dev b_to_a up']: subprocess.check_call(shlex.split(cmd)) server = subprocess.Popen(shlex.split(f"ip netns exec netns_a {PYTHON} {sys.argv[0]} server {mode}")) client = subprocess.Popen(shlex.split(f"ip netns exec netns_b {PYTHON} {sys.argv[0]} client")) client.wait() server.wait() sys.exit(server.returncode) finally: subprocess.run(shlex.split("ip netns delete netns_a")) subprocess.run(shlex.split("ip netns delete netns_b")) Fixes: d445516966dc ("net: xdp: support xdp generic on virtual devices") Reported-by: Stepan Horacek <shoracek@redhat.com> Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-11netfilter: conntrack: split resolve_clash functionFlorian Westphal1-17/+41
Followup patch will need a helper function with the 'clashing entries refer to the identical tuple in both directions' resolution logic. This patch will add another resolve_clash helper where loser_ct must not be added to the dying list because it will be inserted into the table. Therefore this also moves the stat counters and dying-list insertion of the losing ct. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-02-11netfilter: conntrack: place confirm-bit setting in a helperFlorian Westphal1-7/+14
... so it can be re-used from clash resolution in followup patch. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-02-11netfilter: conntrack: remove two args from resolve_clashFlorian Westphal1-18/+51
ctinfo is whats taken from the skb, i.e. ct = nf_ct_get(skb, &ctinfo). We do not pass 'ct' and instead re-fetch it from the skb. Just do the same for both netns and ctinfo. Also add a comment on what clash resolution is supposed to do. While at it, one indent level can be removed. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-02-10tipc: fix successful connect() but timed outTuong Lien1-0/+2
In commit 9546a0b7ce00 ("tipc: fix wrong connect() return code"), we fixed the issue with the 'connect()' that returns zero even though the connecting has failed by waiting for the connection to be 'ESTABLISHED' really. However, the approach has one drawback in conjunction with our 'lightweight' connection setup mechanism that the following scenario can happen: (server) (client) +- accept()| | wait_for_conn() | | |connect() -------+ | |<-------[SYN]---------| > sleeping | | *CONNECTING | |--------->*ESTABLISHED | | |--------[ACK]-------->*ESTABLISHED > wakeup() send()|--------[DATA]------->|\ > wakeup() send()|--------[DATA]------->| | > wakeup() . . . . |-> recvq . . . . . | . send()|--------[DATA]------->|/ > wakeup() close()|--------[FIN]-------->*DISCONNECTING | *DISCONNECTING | | | ~~~~~~~~~~~~~~~~~~> schedule() | wait again . . | ETIMEDOUT Upon the receipt of the server 'ACK', the client becomes 'ESTABLISHED' and the 'wait_for_conn()' process is woken up but not run. Meanwhile, the server starts to send a number of data following by a 'close()' shortly without waiting any response from the client, which then forces the client socket to be 'DISCONNECTING' immediately. When the wait process is switched to be running, it continues to wait until the timer expires because of the unexpected socket state. The client 'connect()' will finally get ‘-ETIMEDOUT’ and force to release the socket whereas there remains the messages in its receive queue. Obviously the issue would not happen if the server had some delay prior to its 'close()' (or the number of 'DATA' messages is large enough), but any kind of delay would make the connection setup/shutdown "heavy". We solve this by simply allowing the 'connect()' returns zero in this particular case. The socket is already 'DISCONNECTING', so any further write will get '-EPIPE' but the socket is still able to read the messages existing in its receive queue. Note: This solution doesn't break the previous one as it deals with a different situation that the socket state is 'DISCONNECTING' but has no error (i.e. sk->sk_err = 0). Fixes: 9546a0b7ce00 ("tipc: fix wrong connect() return code") Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-10mptcp: make the symbol 'mptcp_sk_clone_lock' staticChen Wandun1-1/+1
Fix the following sparse warning: net/mptcp/protocol.c:646:13: warning: symbol 'mptcp_sk_clone_lock' was not declared. Should it be static? Fixes: b0519de8b3f1 ("mptcp: fix use-after-free for ipv6") Signed-off-by: Chen Wandun <chenwandun@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-10tipc: make three functions staticChen Wandun1-3/+4
Fix the following sparse warning: net/tipc/node.c:281:6: warning: symbol 'tipc_node_free' was not declared. Should it be static? net/tipc/node.c:2801:5: warning: symbol '__tipc_nl_node_set_key' was not declared. Should it be static? net/tipc/node.c:2878:5: warning: symbol '__tipc_nl_node_flush_key' was not declared. Should it be static? Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication") Fixes: e1f32190cf7d ("tipc: add support for AEAD key setting via netlink") Signed-off-by: Chen Wandun <chenwandun@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-09Merge tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds1-1/+1
Pull more Kbuild updates from Masahiro Yamada: - fix randconfig to generate a sane .config - rename hostprogs-y / always to hostprogs / always-y, which are more natual syntax. - optimize scripts/kallsyms - fix yes2modconfig and mod2yesconfig - make multiple directory targets ('make foo/ bar/') work * tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: make multiple directory targets work kconfig: Invalidate all symbols after changing to y or m. kallsyms: fix type of kallsyms_token_table[] scripts/kallsyms: change table to store (strcut sym_entry *) scripts/kallsyms: rename local variables in read_symbol() kbuild: rename hostprogs-y/always to hostprogs/always-y kbuild: fix the document to use extra-y for vmlinux.lds kconfig: fix broken dependency in randconfig-generated .config
2020-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds12-128/+157
Pull networking fixes from David Miller: 1) Unbalanced locking in mwifiex_process_country_ie, from Brian Norris. 2) Fix thermal zone registration in iwlwifi, from Andrei Otcheretianski. 3) Fix double free_irq in sgi ioc3 eth, from Thomas Bogendoerfer. 4) Use after free in mptcp, from Florian Westphal. 5) Use after free in wireguard's root_remove_peer_lists, from Eric Dumazet. 6) Properly access packets heads in bonding alb code, from Eric Dumazet. 7) Fix data race in skb_queue_len(), from Qian Cai. 8) Fix regression in r8169 on some chips, from Heiner Kallweit. 9) Fix XDP program ref counting in hv_netvsc, from Haiyang Zhang. 10) Certain kinds of set link netlink operations can cause a NULL deref in the ipv6 addrconf code. Fix from Eric Dumazet. 11) Don't cancel uninitialized work queue in drop monitor, from Ido Schimmel. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits) net: thunderx: use proper interface type for RGMII mt76: mt7615: fix max_nss in mt7615_eeprom_parse_hw_cap bpf: Improve bucket_log calculation logic selftests/bpf: Test freeing sockmap/sockhash with a socket in it bpf, sockhash: Synchronize_rcu before free'ing map bpf, sockmap: Don't sleep while holding RCU lock on tear-down bpftool: Don't crash on missing xlated program instructions bpf, sockmap: Check update requirements after locking drop_monitor: Do not cancel uninitialized work item mlxsw: spectrum_dpipe: Add missing error path mlxsw: core: Add validation of hardware device types for MGPIR register mlxsw: spectrum_router: Clear offload indication from IPv6 nexthops on abort selftests: mlxsw: Add test cases for local table route replacement mlxsw: spectrum_router: Prevent incorrect replacement of local table routes net: dsa: microchip: enable module autoprobe ipv6/addrconf: fix potential NULL deref in inet6_set_link_af() dpaa_eth: support all modes with rate adapting PHYs net: stmmac: update pci platform data to use phy_interface net: stmmac: xgmac: fix missing IFF_MULTICAST checki in dwxgmac2_set_filter net: stmmac: fix missing IFF_MULTICAST check in dwmac4_set_filter ...
2020-02-08Merge branch 'merge.nfs-fs_parse.1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds1-22/+19
Pull vfs file system parameter updates from Al Viro: "Saner fs_parser.c guts and data structures. The system-wide registry of syntax types (string/enum/int32/oct32/.../etc.) is gone and so is the horror switch() in fs_parse() that would have to grow another case every time something got added to that system-wide registry. New syntax types can be added by filesystems easily now, and their namespace is that of functions - not of system-wide enum members. IOW, they can be shared or kept private and if some turn out to be widely useful, we can make them common library helpers, etc., without having to do anything whatsoever to fs_parse() itself. And we already get that kind of requests - the thing that finally pushed me into doing that was "oh, and let's add one for timeouts - things like 15s or 2h". If some filesystem really wants that, let them do it. Without somebody having to play gatekeeper for the variants blessed by direct support in fs_parse(), TYVM. Quite a bit of boilerplate is gone. And IMO the data structures make a lot more sense now. -200LoC, while we are at it" * 'merge.nfs-fs_parse.1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (25 commits) tmpfs: switch to use of invalfc() cgroup1: switch to use of errorfc() et.al. procfs: switch to use of invalfc() hugetlbfs: switch to use of invalfc() cramfs: switch to use of errofc() et.al. gfs2: switch to use of errorfc() et.al. fuse: switch to use errorfc() et.al. ceph: use errorfc() and friends instead of spelling the prefix out prefix-handling analogues of errorf() and friends turn fs_param_is_... into functions fs_parse: handle optional arguments sanely fs_parse: fold fs_parameter_desc/fs_parameter_spec fs_parser: remove fs_parameter_description name field add prefix to fs_context->log ceph_parse_param(), ceph_parse_mon_ips(): switch to passing fc_log new primitive: __fs_parse() switch rbd and libceph to p_log-based primitives struct p_log, variants of warnf() et.al. taking that one instead teach logfc() to handle prefices, give it saner calling conventions get rid of cg_invalf() ...
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.