aboutsummaryrefslogtreecommitdiffstats
path: root/net (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-04-27mptcp: reset subflow when MP_FAIL doesn't respondGeliang Tang4-0/+68
This patch adds a new msk->flags bit MPTCP_FAIL_NO_RESPONSE, then reuses sk_timer to trigger a check if we have not received a response from the peer after sending MP_FAIL. If the peer doesn't respond properly, reset the subflow. Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-27mptcp: add MP_FAIL response supportGeliang Tang3-1/+12
This patch adds a new struct member mp_fail_response_expect in struct mptcp_subflow_context to support MP_FAIL response. In the single subflow with checksum error and contiguous data special case, a MP_FAIL is sent in response to another MP_FAIL. Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-27mptcp: add data lock for sk timersGeliang Tang1-0/+12
mptcp_data_lock() needs to be held when manipulating the msk retransmit_timer or the sk sk_timer. This patch adds the data lock for the both timers. Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-27mptcp: use mptcp_stop_timerGeliang Tang1-2/+2
Use the helper mptcp_stop_timer() instead of using sk_stop_timer() to stop icsk_retransmit_timer directly. Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-26net: tls: fix async vs NIC crypto offloadJakub Kicinski1-0/+2
When NIC takes care of crypto (or the record has already been decrypted) we forget to update darg->async. ->async is supposed to mean whether record is async capable on input and whether record has been queued for async crypto on output. Reported-by: Gal Pressman <gal@nvidia.com> Fixes: 3547a1f9d988 ("tls: rx: use async as an in-out argument") Tested-by: Gal Pressman <gal@nvidia.com> Link: https://lore.kernel.org/r/20220425233309.344858-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-26net: generalize skb freeing deferral to per-cpu listsEric Dumazet7-32/+82
Logic added in commit f35f821935d8 ("tcp: defer skb freeing after socket lock is released") helped bulk TCP flows to move the cost of skbs frees outside of critical section where socket lock was held. But for RPC traffic, or hosts with RFS enabled, the solution is far from being ideal. For RPC traffic, recvmsg() has to return to user space right after skb payload has been consumed, meaning that BH handler has no chance to pick the skb before recvmsg() thread. This issue is more visible with BIG TCP, as more RPC fit one skb. For RFS, even if BH handler picks the skbs, they are still picked from the cpu on which user thread is running. Ideally, it is better to free the skbs (and associated page frags) on the cpu that originally allocated them. This patch removes the per socket anchor (sk->defer_list) and instead uses a per-cpu list, which will hold more skbs per round. This new per-cpu list is drained at the end of net_action_rx(), after incoming packets have been processed, to lower latencies. In normal conditions, skbs are added to the per-cpu list with no further action. In the (unlikely) cases where the cpu does not run net_action_rx() handler fast enough, we use an IPI to raise NET_RX_SOFTIRQ on the remote cpu. Also, we do not bother draining the per-cpu list from dev_cpu_dead() This is because skbs in this list have no requirement on how fast they should be freed. Note that we can add in the future a small per-cpu cache if we see any contention on sd->defer_lock. Tested on a pair of hosts with 100Gbit NIC, RFS enabled, and /proc/sys/net/ipv4/tcp_rmem[2] tuned to 16MB to work around page recycling strategy used by NIC driver (its page pool capacity being too small compared to number of skbs/pages held in sockets receive queues) Note that this tuning was only done to demonstrate worse conditions for skb freeing for this particular test. These conditions can happen in more general production workload. 10 runs of one TCP_STREAM flow Before: Average throughput: 49685 Mbit. Kernel profiles on cpu running user thread recvmsg() show high cost for skb freeing related functions (*) 57.81% [kernel] [k] copy_user_enhanced_fast_string (*) 12.87% [kernel] [k] skb_release_data (*) 4.25% [kernel] [k] __free_one_page (*) 3.57% [kernel] [k] __list_del_entry_valid 1.85% [kernel] [k] __netif_receive_skb_core 1.60% [kernel] [k] __skb_datagram_iter (*) 1.59% [kernel] [k] free_unref_page_commit (*) 1.16% [kernel] [k] __slab_free 1.16% [kernel] [k] _copy_to_iter (*) 1.01% [kernel] [k] kfree (*) 0.88% [kernel] [k] free_unref_page 0.57% [kernel] [k] ip6_rcv_core 0.55% [kernel] [k] ip6t_do_table 0.54% [kernel] [k] flush_smp_call_function_queue (*) 0.54% [kernel] [k] free_pcppages_bulk 0.51% [kernel] [k] llist_reverse_order 0.38% [kernel] [k] process_backlog (*) 0.38% [kernel] [k] free_pcp_prepare 0.37% [kernel] [k] tcp_recvmsg_locked (*) 0.37% [kernel] [k] __list_add_valid 0.34% [kernel] [k] sock_rfree 0.34% [kernel] [k] _raw_spin_lock_irq (*) 0.33% [kernel] [k] __page_cache_release 0.33% [kernel] [k] tcp_v6_rcv (*) 0.33% [kernel] [k] __put_page (*) 0.29% [kernel] [k] __mod_zone_page_state 0.27% [kernel] [k] _raw_spin_lock After patch: Average throughput: 73076 Mbit. Kernel profiles on cpu running user thread recvmsg() looks better: 81.35% [kernel] [k] copy_user_enhanced_fast_string 1.95% [kernel] [k] _copy_to_iter 1.95% [kernel] [k] __skb_datagram_iter 1.27% [kernel] [k] __netif_receive_skb_core 1.03% [kernel] [k] ip6t_do_table 0.60% [kernel] [k] sock_rfree 0.50% [kernel] [k] tcp_v6_rcv 0.47% [kernel] [k] ip6_rcv_core 0.45% [kernel] [k] read_tsc 0.44% [kernel] [k] _raw_spin_lock_irqsave 0.37% [kernel] [k] _raw_spin_lock 0.37% [kernel] [k] native_irq_return_iret 0.33% [kernel] [k] __inet6_lookup_established 0.31% [kernel] [k] ip6_protocol_deliver_rcu 0.29% [kernel] [k] tcp_rcv_established 0.29% [kernel] [k] llist_reverse_order v2: kdoc issue (kernel bots) do not defer if (alloc_cpu == smp_processor_id()) (Paolo) replace the sk_buff_head with a single-linked list (Jakub) add a READ_ONCE()/WRITE_ONCE() for the lockless read of sd->defer_list Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20220422201237.416238-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-26net/af_packet: add VLAN support for AF_PACKET SOCK_RAW GSOHangbin Liu1-5/+13
Currently, the kernel drops GSO VLAN tagged packet if it's created with socket(AF_PACKET, SOCK_RAW, 0) plus virtio_net_hdr. The reason is AF_PACKET doesn't adjust the skb network header if there is a VLAN tag. Then after virtio_net_hdr_set_proto() called, the skb->protocol will be set to ETH_P_IP/IPv6. And in later inet/ipv6_gso_segment() the skb is dropped as network header position is invalid. Let's handle VLAN packets by adjusting network header position in packet_parse_headers(). The adjustment is safe and does not affect the later xmit as tap device also did that. In packet_snd(), packet_parse_headers() need to be moved before calling virtio_net_hdr_set_proto(), so we can set correct skb->protocol and network header first. There is no need to update tpacket_snd() as it calls packet_parse_headers() in tpacket_fill_skb(), which is already before calling virtio_net_hdr_* functions. skb->no_fcs setting is also moved upper to make all skb settings together and keep consistency with function packet_sendmsg_spkt(). Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20220425014502.985464-1-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-25net: dsa: remove unused headersMarcin Wojtas1-9/+0
Reduce a number of included headers to a necessary minimum. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25arp: fix unused variable warnning when CONFIG_PROC_FS=nYajun Deng1-5/+2
net/ipv4/arp.c:1412:36: warning: unused variable 'arp_seq_ops' [-Wunused-const-variable] Add #ifdef CONFIG_PROC_FS for 'arp_seq_ops'. Fixes: e968b1b3e9b8 ("arp: Remove #ifdef CONFIG_PROC_FS") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Yajun Deng <yajun.deng@linux.dev> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25devlink: introduce line card device info infrastructureJiri Pirko1-1/+70
Extend the line card info message with information (e.g., FW version) about devices found on the line card. Example: $ devlink lc info pci/0000:01:00.0 lc 8 pci/0000:01:00.0: lc 8 versions: fixed: hw.revision 0 running: ini.version 4 devices: device 0 versions: running: fw 19.2010.1310 device 1 versions: running: fw 19.2010.1310 device 2 versions: running: fw 19.2010.1310 device 3 versions: running: fw 19.2010.1310 Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25devlink: introduce line card info get messageJiri Pirko1-4/+126
Allow the driver to provide per line card info get op to fill-up info, similar to the "devlink dev info". Example: $ devlink lc info pci/0000:01:00.0 lc 8 pci/0000:01:00.0: lc 8 versions: fixed: hw.revision 0 running: ini.version 4 Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25devlink: introduce line card devices supportJiri Pirko1-1/+103
Line card can contain one or more devices that makes sense to make visible to the user. For example, this can be a gearbox with flash memory, which could be updated. Provide the driver possibility to attach such devices to a line card and expose those to user. Example: $ devlink lc show pci/0000:01:00.0 lc 8 pci/0000:01:00.0: lc 8 state active type 16x100G supported_types: 16x100G devices: device 0 device 1 device 2 device 3 Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-23mptcp: add mib for infinite map sendingGeliang Tang3-0/+3
This patch adds a new mib named MPTCP_MIB_INFINITEMAPTX, increase it when a infinite mapping has been sent out. Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-23mptcp: infinite mapping receivingGeliang Tang1-1/+3
This patch adds the infinite mapping receiving logic. When the infinite mapping is received, set the map_data_len of the subflow to 0. In subflow_check_data_avail(), only reset the subflow when the map_data_len of the subflow is non-zero. Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-23mptcp: infinite mapping sendingGeliang Tang4-2/+41
This patch adds the infinite mapping sending logic. Add a new flag send_infinite_map in struct mptcp_subflow_context. Set it true when a single contiguous subflow is in use and the allow_infinite_fallback flag is true in mptcp_pm_mp_fail_received(). In mptcp_sendmsg_frag(), if this flag is true, call the new function mptcp_update_infinite_map() to set the infinite mapping. Add a new flag infinite_map in struct mptcp_ext, set it true in mptcp_update_infinite_map(), and check this flag in a new helper mptcp_check_infinite_map(). In mptcp_update_infinite_map(), set data_len to 0, and clear the send_infinite_map flag, then do fallback. In mptcp_established_options(), use the helper mptcp_check_infinite_map() to let the infinite mapping DSS can be sent out in the fallback mode. Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-23mptcp: track and update contiguous data statusGeliang Tang3-1/+7
This patch adds a new member allow_infinite_fallback in mptcp_sock, which is initialized to 'true' when the connection begins and is set to 'false' on any retransmit or successful MP_JOIN. Only do infinite mapping fallback if there is a single subflow AND there have been no retransmissions AND there have never been any MP_JOINs. Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-23mptcp: add the fallback checkGeliang Tang1-21/+24
This patch adds the fallback check in subflow_check_data_avail(). Only do the fallback when the msk hasn't fallen back yet. Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-23mptcp: don't send RST for single subflowGeliang Tang1-5/+5
When a bad checksum is detected and a single subflow is in use, don't send RST + MP_FAIL, send data_ack + MP_FAIL instead. So invoke tcp_send_active_reset() only when mptcp_has_another_subflow() is true. Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-22ipv4: Initialise ->flowi4_scope properly in ICMP handlers.Guillaume Nault1-20/+17
All the *_redirect() and *_update_pmtu() functions initialise their struct flowi4 variable with either __build_flow_key() or build_sk_flow_key(). When sk is provided, these functions use RT_CONN_FLAGS() to set ->flowi4_tos and always use RT_SCOPE_UNIVERSE for ->flowi4_scope. Then they rely on ip_rt_fix_tos() to adjust the scope based on the RTO_ONLINK bit and to mask the tos with IPTOS_RT_MASK. This patch modifies __build_flow_key() and build_sk_flow_key() to properly initialise ->flowi4_tos and ->flowi4_scope, so that the ICMP redirects and PMTU handlers don't need an extra call to ip_rt_fix_tos() before doing a fib lookup. That is, we: * Drop RT_CONN_FLAGS(): use ip_sock_rt_tos() and ip_sock_rt_scope() instead, so that we don't have to rely on ip_rt_fix_tos() to adjust the scope anymore. * Apply IPTOS_RT_MASK to the tos, so that we don't need ip_rt_fix_tos() to do it for us. * Drop the ip_rt_fix_tos() calls that now become useless. The only remaining ip_rt_fix_tos() caller is ip_route_output_key_hash() which needs it as long as external callers still use the RTO_ONLINK flag. Note: This patch also drops some useless RT_TOS() calls as IPTOS_RT_MASK is a stronger mask. Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-22ipv4: Avoid using RTO_ONLINK with ip_route_connect().Guillaume Nault4-13/+10
Now that ip_rt_fix_tos() doesn't reset ->flowi4_scope unconditionally, we don't have to rely on the RTO_ONLINK bit to properly set the scope of a flowi4 structure. We can just set ->flowi4_scope explicitly and avoid using RTO_ONLINK in ->flowi4_tos. This patch converts callers of ip_route_connect(). Instead of setting the tos parameter with RT_CONN_FLAGS(sk), as all callers do, we can: 1- Drop the tos parameter from ip_route_connect(): its value was entirely based on sk, which is also passed as parameter. 2- Set ->flowi4_scope depending on the SOCK_LOCALROUTE socket option instead of always initialising it with RT_SCOPE_UNIVERSE (let's define ip_sock_rt_scope() for this purpose). 3- Avoid overloading ->flowi4_tos with RTO_ONLINK: since the scope is now properly initialised, we don't need to tell ip_rt_fix_tos() to adjust ->flowi4_scope for us. So let's define ip_sock_rt_tos(), which is the same as RT_CONN_FLAGS() but without the RTO_ONLINK bit overload. Note: In the original ip_route_connect() code, __ip_route_output_key() might clear the RTO_ONLINK bit of fl4->flowi4_tos (because of ip_rt_fix_tos()). Therefore flowi4_update_output() had to reuse the original tos variable. Now that we don't set RTO_ONLINK any more, this is not a problem and we can use fl4->flowi4_tos in flowi4_update_output(). Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-22ipv4: Don't reset ->flowi4_scope in ip_rt_fix_tos().Guillaume Nault1-2/+2
All callers already initialise ->flowi4_scope with RT_SCOPE_UNIVERSE, either by manual field assignment, memset(0) of the whole structure or implicit structure initialisation of on-stack variables (RT_SCOPE_UNIVERSE actually equals 0). Therefore, we don't need to always initialise ->flowi4_scope in ip_rt_fix_tos(). We only need to reduce the scope to RT_SCOPE_LINK when the special RTO_ONLINK flag is present in the tos. This will allow some code simplification, like removing ip_rt_fix_tos(). Also, the long term idea is to remove RTO_ONLINK entirely by properly initialising ->flowi4_scope, instead of overloading ->flowi4_tos with a special flag. Eventually, this will allow to convert ->flowi4_tos to dscp_t. Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-22ipv6: Use ipv6_only_sock() helper in condition.Kuniyuki Iwashima2-2/+2
This patch replaces some sk_ipv6only tests with ipv6_only_sock(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-22ipv6: Remove __ipv6_only_sock().Kuniyuki Iwashima5-8/+8
Since commit 9fe516ba3fb2 ("inet: move ipv6only in sock_common"), ipv6_only_sock() and __ipv6_only_sock() are the same macro. Let's remove the one. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-22Revert "rtnetlink: return EINVAL when request cannot succeed"Florent Fourcot1-1/+1
This reverts commit b6177d3240a4 ip-link command is testing kernel capability by sending a RTM_NEWLINK request, without any argument. It accepts everything in reply, except EOPNOTSUPP and EINVAL (functions iplink_have_newlink / accept_msg) So we must keep compatiblity here, invalid empty message should not return EINVAL Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr> Tested-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-22net/ipv6: Enforce limits for accept_unsolicited_na sysctlArun Ajith S1-1/+1
Fix mistake in the original patch where limits were specified but the handler didn't take care of the limits. Signed-off-by: Arun Ajith S <aajith@arista.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni16-41/+83
drivers/net/ethernet/microchip/lan966x/lan966x_main.c d08ed852560e ("net: lan966x: Make sure to release ptp interrupt") c8349639324a ("net: lan966x: Add FDMA functionality") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-20net/sched: flower: Consider the number of tags for vlan filtersBoris Sukholitko1-8/+16
Before this patch the existence of vlan filters was conditional on the vlan protocol being matched in the tc rule. For example, the following rule: tc filter add dev eth1 ingress flower vlan_prio 5 was illegal because vlan protocol (e.g. 802.1q) does not appear in the rule. Remove the above restriction by looking at the num_of_vlans filter to allow further matching on vlan attributes. The following rule becomes legal as a result of this commit: tc filter add dev eth1 ingress flower num_of_vlans 1 vlan_prio 5 because having num_of_vlans==1 implies that the packet is single tagged. Change is_vlan_key helper to look at the number of vlans in addition to the vlan ethertype. The outcome of this change is that outer (e.g. vlan_prio) and inner (e.g. cvlan_prio) tag vlan filters require the number of vlan tags to be greater then 0 and 1 accordingly. As a result of is_vlan_key change, the ethertype may be set to 0 when matching on the number of vlans. Update fl_set_key_vlan to avoid setting key, mask vlan_tpid for the 0 ethertype. Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20net/sched: flower: Add number of vlan tags filterBoris Sukholitko1-0/+14
These are bookkeeping parts of the new num_of_vlans filter. Defines, dump, load and set are being done here. Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20flow_dissector: Add number of vlan tags dissectorBoris Sukholitko1-0/+20
Our customers in the fiber telecom world have network configurations where they would like to control their traffic according to the number of tags appearing in the packet. For example, TR247 GPON conformance test suite specification mostly talks about untagged, single, double tagged packets and gives lax guidelines on the vlan protocol vs. number of vlan tags. This is different from the common IT networks where 802.1Q and 802.1ad protocols are usually describe single and double tagged packet. GPON configurations that we work with have arbitrary mix the above protocols and number of vlan tags in the packet. The goal is to make the following TC commands possible: tc filter add dev eth1 ingress flower \ num_of_vlans 1 vlan_prio 5 action drop From our logs, we have redirect rules such that: tc filter add dev $GPON ingress flower num_of_vlans $N \ action mirred egress redirect dev $DEV where N can range from 0 to 3 and $DEV is the function of $N. Also there are rules setting skb mark based on the number of vlans: tc filter add dev $GPON ingress flower num_of_vlans $N vlan_prio \ $P action skbedit mark $M This new dissector allows extracting the number of vlan tags existing in the packet. Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20net/sched: flower: Reduce identation after is_key_vlan refactoringBoris Sukholitko1-17/+17
Whitespace only. Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20net/sched: flower: Helper function for vlan ethtype checksBoris Sukholitko1-15/+17
There are somewhat repetitive ethertype checks in fl_set_key. Refactor them into is_vlan_key helper function. To make the changes clearer, avoid touching identation levels. This is the job for the next patch in the series. Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20net: dsa: don't emit targeted cross-chip notifiers for MTU changeVladimir Oltean4-25/+7
A cross-chip notifier with "targeted_match=true" is one that matches only the local port of the switch that emitted it. In other words, passing through the cross-chip notifier layer serves no purpose. Eliminate this concept by calling directly ds->ops->port_change_mtu instead of emitting a targeted cross-chip notifier. This leaves the DSA_NOTIFIER_MTU event being emitted only for MTU updates on the CPU port, which need to be reflected also across all DSA links. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20net: dsa: drop dsa_slave_priv from dsa_slave_change_mtuVladimir Oltean1-2/+1
We can get a hold of the "ds" pointer directly from "dp", no need for the dsa_slave_priv. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20net: dsa: avoid one dsa_to_port() in dsa_slave_change_mtuVladimir Oltean1-4/+1
We could retrieve the cpu_dp pointer directly from the "dp" we already have, no need to resort to dsa_to_port(ds, port). This change also removes the need for an "int port", so that is also deleted. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20net: dsa: use dsa_tree_for_each_user_port in dsa_slave_change_mtuVladimir Oltean1-8/+5
Use the more conventional iterator over user ports instead of explicitly ignoring them, and use the more conventional name "other_dp" instead of "dp_iter", for readability. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20net: dsa: make cross-chip notifiers more efficient for host eventsVladimir Oltean4-140/+76
To determine whether a given port should react to the port targeted by the notifier, dsa_port_host_vlan_match() and dsa_port_host_address_match() look at the positioning of the switch port currently executing the notifier relative to the switch port for which the notifier was emitted. To maintain stylistic compatibility with the other match functions from switch.c, the host address and host VLAN match functions take the notifier information about targeted port, switch and tree indices as argument. However, these functions only use that information to retrieve the struct dsa_port *targeted_dp, which is an invariant for the outer loop that calls them. So it makes more sense to calculate the targeted dp only once, and pass it to them as argument. But furthermore, the targeted dp is actually known at the time the call to dsa_port_notify() is made. It is just that we decide to only save the indices of the port, switch and tree in the notifier structure, just to retrace our steps and find the dp again using dsa_switch_find() and dsa_to_port(). But both the above functions are relatively expensive, since they need to iterate through lists. It appears more straightforward to make all notifiers just pass the targeted dp inside their info structure, and have the code that needs the indices to look at info->dp->index instead of info->port, or info->dp->ds->index instead of info->sw_index, or info->dp->ds->dst->index instead of info->tree_index. For the sake of consistency, all cross-chip notifiers are converted to pass the "dp" directly. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20net: dsa: move reset of VLAN filtering to dsa_port_switchdev_unsync_attrsVladimir Oltean2-61/+57
In dsa_port_switchdev_unsync_attrs() there is a comment that resetting the VLAN filtering isn't done where it is expected. And since commit 108dc8741c20 ("net: dsa: Avoid cross-chip syncing of VLAN filtering"), there is no reason to handle this in switch.c either. Therefore, move the logic to port.c, and adapt it slightly to the data structures and naming conventions from there. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-19netlink: reset network and mac headers in netlink_dump()Eric Dumazet1-0/+7
netlink_dump() is allocating an skb, reserves space in it but forgets to reset network header. This allows a BPF program, invoked later from sk_filter() to access uninitialized kernel memory from the reserved space. Theorically mac header reset could be omitted, because it is set to a special initial value. bpf_internal_load_pointer_neg_helper calls skb_mac_header() without checking skb_mac_header_was_set(). Relying on skb->len not being too big seems fragile. We also could add a sanity check in bpf_internal_load_pointer_neg_helper() to avoid surprises in the future. syzbot report was: BUG: KMSAN: uninit-value in ___bpf_prog_run+0xa22b/0xb420 kernel/bpf/core.c:1637 ___bpf_prog_run+0xa22b/0xb420 kernel/bpf/core.c:1637 __bpf_prog_run32+0x121/0x180 kernel/bpf/core.c:1796 bpf_dispatcher_nop_func include/linux/bpf.h:784 [inline] __bpf_prog_run include/linux/filter.h:626 [inline] bpf_prog_run include/linux/filter.h:633 [inline] __bpf_prog_run_save_cb+0x168/0x580 include/linux/filter.h:756 bpf_prog_run_save_cb include/linux/filter.h:770 [inline] sk_filter_trim_cap+0x3bc/0x8c0 net/core/filter.c:150 sk_filter include/linux/filter.h:905 [inline] netlink_dump+0xe0c/0x16c0 net/netlink/af_netlink.c:2276 netlink_recvmsg+0x1129/0x1c80 net/netlink/af_netlink.c:2002 sock_recvmsg_nosec net/socket.c:948 [inline] sock_recvmsg net/socket.c:966 [inline] sock_read_iter+0x5a9/0x630 net/socket.c:1039 do_iter_readv_writev+0xa7f/0xc70 do_iter_read+0x52c/0x14c0 fs/read_write.c:786 vfs_readv fs/read_write.c:906 [inline] do_readv+0x432/0x800 fs/read_write.c:943 __do_sys_readv fs/read_write.c:1034 [inline] __se_sys_readv fs/read_write.c:1031 [inline] __x64_sys_readv+0xe5/0x120 fs/read_write.c:1031 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was stored to memory at: ___bpf_prog_run+0x96c/0xb420 kernel/bpf/core.c:1558 __bpf_prog_run32+0x121/0x180 kernel/bpf/core.c:1796 bpf_dispatcher_nop_func include/linux/bpf.h:784 [inline] __bpf_prog_run include/linux/filter.h:626 [inline] bpf_prog_run include/linux/filter.h:633 [inline] __bpf_prog_run_save_cb+0x168/0x580 include/linux/filter.h:756 bpf_prog_run_save_cb include/linux/filter.h:770 [inline] sk_filter_trim_cap+0x3bc/0x8c0 net/core/filter.c:150 sk_filter include/linux/filter.h:905 [inline] netlink_dump+0xe0c/0x16c0 net/netlink/af_netlink.c:2276 netlink_recvmsg+0x1129/0x1c80 net/netlink/af_netlink.c:2002 sock_recvmsg_nosec net/socket.c:948 [inline] sock_recvmsg net/socket.c:966 [inline] sock_read_iter+0x5a9/0x630 net/socket.c:1039 do_iter_readv_writev+0xa7f/0xc70 do_iter_read+0x52c/0x14c0 fs/read_write.c:786 vfs_readv fs/read_write.c:906 [inline] do_readv+0x432/0x800 fs/read_write.c:943 __do_sys_readv fs/read_write.c:1034 [inline] __se_sys_readv fs/read_write.c:1031 [inline] __x64_sys_readv+0xe5/0x120 fs/read_write.c:1031 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was created at: slab_post_alloc_hook mm/slab.h:737 [inline] slab_alloc_node mm/slub.c:3244 [inline] __kmalloc_node_track_caller+0xde3/0x14f0 mm/slub.c:4972 kmalloc_reserve net/core/skbuff.c:354 [inline] __alloc_skb+0x545/0xf90 net/core/skbuff.c:426 alloc_skb include/linux/skbuff.h:1158 [inline] netlink_dump+0x30f/0x16c0 net/netlink/af_netlink.c:2242 netlink_recvmsg+0x1129/0x1c80 net/netlink/af_netlink.c:2002 sock_recvmsg_nosec net/socket.c:948 [inline] sock_recvmsg net/socket.c:966 [inline] sock_read_iter+0x5a9/0x630 net/socket.c:1039 do_iter_readv_writev+0xa7f/0xc70 do_iter_read+0x52c/0x14c0 fs/read_write.c:786 vfs_readv fs/read_write.c:906 [inline] do_readv+0x432/0x800 fs/read_write.c:943 __do_sys_readv fs/read_write.c:1034 [inline] __se_sys_readv fs/read_write.c:1031 [inline] __x64_sys_readv+0xe5/0x120 fs/read_write.c:1031 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x44/0xae CPU: 0 PID: 3470 Comm: syz-executor751 Not tainted 5.17.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: db65a3aaf29e ("netlink: Trim skb to alloc size to avoid MSG_TRUNC") Fixes: 9063e21fb026 ("netlink: autosize skb lengthes") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20220415181442.551228-1-eric.dumazet@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-19rtnetlink: return EINVAL when request cannot succeedFlorent Fourcot1-1/+1
A request without interface name/interface index/interface group cannot work. We should return EINVAL Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr> Signed-off-by: Brian Baboch <brian.baboch@wifirst.fr> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-19rtnetlink: return ENODEV when IFLA_ALT_IFNAME is used in dellinkFlorent Fourcot1-1/+1
If IFLA_ALT_IFNAME is set and given interface is not found, we should return ENODEV and be consistent with IFLA_IFNAME behaviour This commit extends feature of commit 76c9ac0ee878, "net: rtnetlink: add possibility to use alternative names as message handle" CC: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr> Signed-off-by: Brian Baboch <brian.baboch@wifirst.fr> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-19rtnetlink: enable alt_ifname for setlink/newlinkFlorent Fourcot1-40/+29
buffer called "ifname" given in function rtnl_dev_get is always valid when called by setlink/newlink, but contains only empty string when IFLA_IFNAME is not given. So IFLA_ALT_IFNAME is always ignored This patch fixes rtnl_dev_get function with a remove of ifname argument, and move ifname copy in do_setlink when required. It extends feature of commit 76c9ac0ee878, "net: rtnetlink: add possibility to use alternative names as message handle"" CC: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr> Signed-off-by: Brian Baboch <brian.baboch@wifirst.fr> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-19rtnetlink: return ENODEV when ifname does not exist and group is givenFlorent Fourcot1-4/+14
When the interface does not exist, and a group is given, the given parameters are being set to all interfaces of the given group. The given IFNAME/ALT_IF_NAME are being ignored in that case. That can be dangerous since a typo (or a deleted interface) can produce weird side effects for caller: Case 1: IFLA_IFNAME=valid_interface IFLA_GROUP=1 MTU=1234 Case 1 will update MTU and group of the given interface "valid_interface". Case 2: IFLA_IFNAME=doesnotexist IFLA_GROUP=1 MTU=1234 Case 2 will update MTU of all interfaces in group 1. IFLA_IFNAME is ignored in this case This behaviour is not consistent and dangerous. In order to fix this issue, we now return ENODEV when the given IFNAME does not exist. Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr> Signed-off-by: Brian Baboch <brian.baboch@wifirst.fr> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-19net: sched: support hash selecting tx queueTonghao Zhang1-2/+47
This patch allows users to pick queue_mapping, range from A to B. Then we can load balance packets from A to B tx queue. The range is an unsigned 16bit value in decimal format. $ tc filter ... action skbedit queue_mapping skbhash A B "skbedit queue_mapping QUEUE_MAPPING" (from "man 8 tc-skbedit") is enhanced with flags: SKBEDIT_F_TXQ_SKBHASH +----+ +----+ +----+ | P1 | | P2 | | Pn | +----+ +----+ +----+ | | | +-----------+-----------+ | | clsact/skbedit | MQ v +-----------+-----------+ | q0 | qn | qm v v v HTB/FQ FIFO ... FIFO For example: If P1 sends out packets to different Pods on other host, and we want distribute flows from qn - qm. Then we can use skb->hash as hash. setup commands: $ NETDEV=eth0 $ ip netns add n1 $ ip link add ipv1 link $NETDEV type ipvlan mode l2 $ ip link set ipv1 netns n1 $ ip netns exec n1 ifconfig ipv1 2.2.2.100/24 up $ tc qdisc add dev $NETDEV clsact $ tc filter add dev $NETDEV egress protocol ip prio 1 \ flower skip_hw src_ip 2.2.2.100 action skbedit queue_mapping skbhash 2 6 $ tc qdisc add dev $NETDEV handle 1: root mq $ tc qdisc add dev $NETDEV parent 1:1 handle 2: htb $ tc class add dev $NETDEV parent 2: classid 2:1 htb rate 100kbit $ tc class add dev $NETDEV parent 2: classid 2:2 htb rate 200kbit $ tc qdisc add dev $NETDEV parent 1:2 tbf rate 100mbit burst 100mb latency 1 $ tc qdisc add dev $NETDEV parent 1:3 pfifo $ tc qdisc add dev $NETDEV parent 1:4 pfifo $ tc qdisc add dev $NETDEV parent 1:5 pfifo $ tc qdisc add dev $NETDEV parent 1:6 pfifo $ tc qdisc add dev $NETDEV parent 1:7 pfifo $ ip netns exec n1 iperf3 -c 2.2.2.1 -i 1 -t 10 -P 10 pick txqueue from 2 - 6: $ ethtool -S $NETDEV | grep -i tx_queue_[0-9]_bytes tx_queue_0_bytes: 42 tx_queue_1_bytes: 0 tx_queue_2_bytes: 11442586444 tx_queue_3_bytes: 7383615334 tx_queue_4_bytes: 3981365579 tx_queue_5_bytes: 3983235051 tx_queue_6_bytes: 6706236461 tx_queue_7_bytes: 42 tx_queue_8_bytes: 0 tx_queue_9_bytes: 0 txqueues 2 - 6 are mapped to classid 1:3 - 1:7 $ tc -s class show dev $NETDEV ... class mq 1:3 root leaf 8002: Sent 11949133672 bytes 7929798 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 class mq 1:4 root leaf 8003: Sent 7710449050 bytes 5117279 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 class mq 1:5 root leaf 8004: Sent 4157648675 bytes 2758990 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 class mq 1:6 root leaf 8005: Sent 4159632195 bytes 2759990 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 class mq 1:7 root leaf 8006: Sent 7003169603 bytes 4646912 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 ... Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jonathan Lemon <jonathan.lemon@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Alexander Lobakin <alobakin@pm.me> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Talal Ahmad <talalahmad@google.com> Cc: Kevin Hao <haokexin@gmail.com> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Kees Cook <keescook@chromium.org> Cc: Kumar Kartikeya Dwivedi <memxor@gmail.com> Cc: Antoine Tenart <atenart@kernel.org> Cc: Wei Wang <weiwan@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-19net: sched: use queue_mapping to pick tx queueTonghao Zhang2-3/+34
This patch fixes issue: * If we install tc filters with act_skbedit in clsact hook. It doesn't work, because netdev_core_pick_tx() overwrites queue_mapping. $ tc filter ... action skbedit queue_mapping 1 And this patch is useful: * We can use FQ + EDT to implement efficient policies. Tx queues are picked by xps, ndo_select_queue of netdev driver, or skb hash in netdev_core_pick_tx(). In fact, the netdev driver, and skb hash are _not_ under control. xps uses the CPUs map to select Tx queues, but we can't figure out which task_struct of pod/containter running on this cpu in most case. We can use clsact filters to classify one pod/container traffic to one Tx queue. Why ? In containter networking environment, there are two kinds of pod/ containter/net-namespace. One kind (e.g. P1, P2), the high throughput is key in these applications. But avoid running out of network resource, the outbound traffic of these pods is limited, using or sharing one dedicated Tx queues assigned HTB/TBF/FQ Qdisc. Other kind of pods (e.g. Pn), the low latency of data access is key. And the traffic is not limited. Pods use or share other dedicated Tx queues assigned FIFO Qdisc. This choice provides two benefits. First, contention on the HTB/FQ Qdisc lock is significantly reduced since fewer CPUs contend for the same queue. More importantly, Qdisc contention can be eliminated completely if each CPU has its own FIFO Qdisc for the second kind of pods. There must be a mechanism in place to support classifying traffic based on pods/container to different Tx queues. Note that clsact is outside of Qdisc while Qdisc can run a classifier to select a sub-queue under the lock. In general recording the decision in the skb seems a little heavy handed. This patch introduces a per-CPU variable, suggested by Eric. The xmit.skip_txqueue flag is firstly cleared in __dev_queue_xmit(). - Tx Qdisc may install that skbedit actions, then xmit.skip_txqueue flag is set in qdisc->enqueue() though tx queue has been selected in netdev_tx_queue_mapping() or netdev_core_pick_tx(). That flag is cleared firstly in __dev_queue_xmit(), is useful: - Avoid picking Tx queue with netdev_tx_queue_mapping() in next netdev in such case: eth0 macvlan - eth0.3 vlan - eth0 ixgbe-phy: For example, eth0, macvlan in pod, which root Qdisc install skbedit queue_mapping, send packets to eth0.3, vlan in host. In __dev_queue_xmit() of eth0.3, clear the flag, does not select tx queue according to skb->queue_mapping because there is no filters in clsact or tx Qdisc of this netdev. Same action taked in eth0, ixgbe in Host. - Avoid picking Tx queue for next packet. If we set xmit.skip_txqueue in tx Qdisc (qdisc->enqueue()), the proper way to clear it is clearing it in __dev_queue_xmit when processing next packets. For performance reasons, use the static key. If user does not config the NET_EGRESS, the patch will not be compiled. +----+ +----+ +----+ | P1 | | P2 | | Pn | +----+ +----+ +----+ | | | +-----------+-----------+ | | clsact/skbedit | MQ v +-----------+-----------+ | q0 | q1 | qn v v v HTB/FQ HTB/FQ ... FIFO Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jonathan Lemon <jonathan.lemon@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Alexander Lobakin <alobakin@pm.me> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Talal Ahmad <talalahmad@google.com> Cc: Kevin Hao <haokexin@gmail.com> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Kees Cook <keescook@chromium.org> Cc: Kumar Kartikeya Dwivedi <memxor@gmail.com> Cc: Antoine Tenart <atenart@kernel.org> Cc: Wei Wang <weiwan@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-19net: dsa: hellcreek: Calculate checksums in taggerKurt Kanzenbach1-0/+8
In case the checksum calculation is offloaded to the DSA master network interface, it will include the switch trailing tag. As soon as the switch strips that tag on egress, the calculated checksum is wrong. Therefore, add the checksum calculation to the tagger (if required) before adding the switch tag. This way, the hellcreek code works with all DSA master interfaces regardless of their declared feature set. Fixes: 01ef09caad66 ("net: dsa: Add tag handling for Hirschmann Hellcreek switches") Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220415103320.90657-1-kurt@linutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-18devlink: add port to line card relationship setJiri Pirko1-1/+25
In order to properly inform user about relationship between port and line card, introduce a driver API to set line card for a port. Use this information to extend port devlink netlink message by line card index and also include the line card index into phys_port_name and by that into a netdevice name. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-18devlink: implement line card active stateJiri Pirko1-0/+41
Allow driver to mark a line card as active. Expose this state to the userspace over devlink netlink interface with proper notifications. 'active' state means that line card was plugged in after being provisioned. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-18devlink: implement line card provisioningJiri Pirko1-3/+319
In order to be able to configure all needed stuff on a port/netdevice of a line card without the line card being present, introduce line card provisioning. Basically by setting a type, provisioning process will start and driver is supposed to create a placeholder for instances (ports/netdevices) for a line card type. Allow the user to query the supported line card types over line card get command. Then implement two netlink command SET to allow user to set/unset the card type. On the driver API side, add provision/unprovision ops and supported types array to be advertised. Upon provision op call, the driver should take care of creating the instances for the particular line card type. Introduce provision_set/clear() functions to be called by the driver once the provisioning/unprovisioning is done on its side. These helpers are not to be called directly due to the async nature of provisioning. Example: $ devlink port # No ports are listed $ devlink lc pci/0000:01:00.0: lc 1 state unprovisioned supported_types: 16x100G lc 2 state unprovisioned supported_types: 16x100G lc 3 state unprovisioned supported_types: 16x100G lc 4 state unprovisioned supported_types: 16x100G lc 5 state unprovisioned supported_types: 16x100G lc 6 state unprovisioned supported_types: 16x100G lc 7 state unprovisioned supported_types: 16x100G lc 8 state unprovisioned supported_types: 16x100G $ devlink lc set pci/0000:01:00.0 lc 8 type 16x100G $ devlink lc show pci/0000:01:00.0 lc 8 pci/0000:01:00.0: lc 8 state active type 16x100G supported_types: 16x100G $ devlink port pci/0000:01:00.0/0: type notset flavour cpu port 0 splittable false pci/0000:01:00.0/53: type eth netdev enp1s0nl8p1 flavour physical lc 8 port 1 splittable true lanes 4 pci/0000:01:00.0/54: type eth netdev enp1s0nl8p2 flavour physical lc 8 port 2 splittable true lanes 4 pci/0000:01:00.0/55: type eth netdev enp1s0nl8p3 flavour physical lc 8 port 3 splittable true lanes 4 pci/0000:01:00.0/56: type eth netdev enp1s0nl8p4 flavour physical lc 8 port 4 splittable true lanes 4 pci/0000:01:00.0/57: type eth netdev enp1s0nl8p5 flavour physical lc 8 port 5 splittable true lanes 4 pci/0000:01:00.0/58: type eth netdev enp1s0nl8p6 flavour physical lc 8 port 6 splittable true lanes 4 pci/0000:01:00.0/59: type eth netdev enp1s0nl8p7 flavour physical lc 8 port 7 splittable true lanes 4 pci/0000:01:00.0/60: type eth netdev enp1s0nl8p8 flavour physical lc 8 port 8 splittable true lanes 4 pci/0000:01:00.0/61: type eth netdev enp1s0nl8p9 flavour physical lc 8 port 9 splittable true lanes 4 pci/0000:01:00.0/62: type eth netdev enp1s0nl8p10 flavour physical lc 8 port 10 splittable true lanes 4 pci/0000:01:00.0/63: type eth netdev enp1s0nl8p11 flavour physical lc 8 port 11 splittable true lanes 4 pci/0000:01:00.0/64: type eth netdev enp1s0nl8p12 flavour physical lc 8 port 12 splittable true lanes 4 pci/0000:01:00.0/125: type eth netdev enp1s0nl8p13 flavour physical lc 8 port 13 splittable true lanes 4 pci/0000:01:00.0/126: type eth netdev enp1s0nl8p14 flavour physical lc 8 port 14 splittable true lanes 4 pci/0000:01:00.0/127: type eth netdev enp1s0nl8p15 flavour physical lc 8 port 15 splittable true lanes 4 pci/0000:01:00.0/128: type eth netdev enp1s0nl8p16 flavour physical lc 8 port 16 splittable true lanes 4 $ devlink lc set pci/0000:01:00.0 lc 8 notype Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-18devlink: add support to create line card and expose to userJiri Pirko1-1/+269
Extend the devlink API so the driver is going to be able to create and destroy linecard instances. There can be multiple line cards per devlink device. Expose this new type of object over devlink netlink API to the userspace, with notifications. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-18tcp: fix signed/unsigned comparisonEric Dumazet1-2/+3
Kernel test robot reported: smatch warnings: net/ipv4/tcp_input.c:5966 tcp_rcv_established() warn: unsigned 'reason' is never less than zero. I actually had one packetdrill failing because of this bug, and was about to send the fix :) v2: Andreas Schwab also pointed out that @reason needs to be negated before we reach tcp_drop_reason() Fixes: 4b506af9c5b8 ("tcp: add two drop reasons for tcp_ack()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.