aboutsummaryrefslogtreecommitdiffstats
path: root/net (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-04-17net: dsa: isolate legacy codeVivien Didelot4-767/+825
This patch moves as is the legacy DSA code from dsa.c to legacy.c, except the few shared symbols which remain in dsa.c. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller22-67/+134
Conflicts were simply overlapping changes. In the net/ipv4/route.c case the code had simply moved around a little bit and the same fix was made in both 'net' and 'net-next'. In the net/sched/sch_generic.c case a fix in 'net' happened at the same time that a new argument was added to qdisc_hash_add(). Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller8-25/+62
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for your net tree, they are: 1) Missing TCP header sanity check in TCPMSS target, from Eric Dumazet. 2) Incorrect event message type for related conntracks created via ctnetlink, from Liping Zhang. 3) Fix incorrect rcu locking when handling helpers from ctnetlink, from Gao feng. 4) Fix missing rcu locking when updating helper, from Liping Zhang. 5) Fix missing read_lock_bh when iterating over list of device addresses from TPROXY and redirect, also from Liping. 6) Fix crash when trying to dump expectations from conntrack with no helper via ctnetlink, from Liping. 7) Missing RCU protection to expecation list update given ctnetlink iterates over the list under rcu read lock side, from Liping too. 8) Don't dump autogenerated seed in nft_hash to userspace, this is very confusing to the user, again from Liping. 9) Fix wrong conntrack netns module refcount in ipt_CLUSTERIP, from Gao feng. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13netfilter: ipt_CLUSTERIP: Fix wrong conntrack netns refcnt usageGao Feng1-1/+1
Current codes invoke wrongly nf_ct_netns_get in the destroy routine, it should use nf_ct_netns_put, not nf_ct_netns_get. It could cause some modules could not be unloaded. Fixes: ecb2421b5ddf ("netfilter: add and use nf_ct_netns_get/put") Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-13netfilter: nft_hash: do not dump the auto generated seedLiping Zhang1-3/+7
This can prevent the nft utility from printing out the auto generated seed to the user, which is unnecessary and confusing. Fixes: cb1b69b0b15b ("netfilter: nf_tables: add hash expression") Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-13netlink: pass extended ACK struct where availableJohannes Berg10-37/+40
This is an add-on to the previous patch that passes the extended ACK structure where it's already available by existing genl_info or extack function arguments. This was done with this spatch (with some manual adjustment of indentation): @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, info->extack) ... } @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, info->extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse(A, B, C, D, E, NULL) +nla_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ... } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_validate(A, B, C, D, NULL) +nlmsg_validate(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate(A, B, C, D, NULL) +nla_validate(A, B, C, D, extack) ...> } @@ expression A, B, C; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate_nested(A, B, C, NULL) +nla_validate_nested(A, B, C, extack) ...> } Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13netlink: pass extended ACK struct to parsing functionsJohannes Berg110-342/+397
Pass the new extended ACK reporting struct to all of the generic netlink parsing functions. For now, pass NULL in almost all callers (except for some in the core.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13netlink: allow sending extended ACK with cookie on successJohannes Berg1-11/+22
Now that we have extended error reporting and a new message format for netlink ACK messages, also extend this to be able to return arbitrary cookie data on success. This will allow, for example, nl80211 to not send an extra message for cookies identifying newly created objects, but return those directly in the ACK message. The cookie data size is currently limited to 20 bytes (since Jamal talked about using SHA1 for identifiers.) Thanks to Jamal Hadi Salim for bringing up this idea during the discussions. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13genetlink: pass extended ACK report downJohannes Berg1-2/+4
Pass the extended ACK reporting struct down from generic netlink to the families, using the existing struct genl_info for simplicity. Also add support to set the extended ACK information from generic netlink users. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13netlink: extended ACK reportingJohannes Berg10-27/+87
Add the base infrastructure and UAPI for netlink extended ACK reporting. All "manual" calls to netlink_ack() pass NULL for now and thus don't get extended ACK reporting. Big thanks goes to Pablo Neira Ayuso for not only bringing up the whole topic at netconf (again) but also coming up with the nlattr passing trick and various other ideas. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13net: ipv4: Refine the ipv4_default_advmssGao Feng1-8/+4
1. Don't get the metric RTAX_ADVMSS of dst. There are two reasons. 1) Its caller dst_metric_advmss has already invoke dst_metric_advmss before invoke default_advmss. 2) The ipv4_default_advmss is used to get the default mss, it should not try to get the metric like ip6_default_advmss. 2. Use sizeof(tcphdr)+sizeof(iphdr) instead of literal 40. 3. Define one new macro IPV4_MAX_PMTU instead of 65535 according to RFC 2675, section 5.1. Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13rtnetlink: Do not generate notifications for NETDEV_CHANGE_TX_QUEUE_LEN eventDavid Ahern1-1/+0
Changing tx queue length generates identical messages: [LINK]22: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default link/ether 02:04:f4:b7:5c:d2 brd ff:ff:ff:ff:ff:ff promiscuity 0 dummy numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 [LINK]22: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default link/ether 02:04:f4:b7:5c:d2 brd ff:ff:ff:ff:ff:ff promiscuity 0 dummy numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 Remove NETDEV_CHANGE_TX_QUEUE_LEN from the list of notifiers that generate notifications. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13rtnetlink: Do not generate notifications for NETDEV_CHANGEUPPER eventDavid Ahern1-1/+0
NETDEV_CHANGEUPPER is an internal event; do not generate userspace notifications. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13rtnetlink: Do not generate notifications for CHANGELOWERSTATE eventDavid Ahern1-1/+0
CHANGELOWERSTATE is an internal event; do not generate userspace notifications. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13rtnetlink: Do not generate notifications for PRECHANGEUPPER eventDavid Ahern1-1/+0
PRECHANGEUPPER is an internal event; do not generate userspace notifications. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13rtnetlink: Do not generate notifications for POST_TYPE_CHANGE eventDavid Ahern1-1/+0
Changing the master device for a link generates many messages; the one generated for POST_TYPE_CHANGE is redundant: [LINK]11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue master br1 state UNKNOWN group default link/ether 02:02:02:02:02:03 brd ff:ff:ff:ff:ff:ff [LINK]11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue master br1 state UNKNOWN group default link/ether 02:02:02:02:02:03 brd ff:ff:ff:ff:ff:ff Remove POST_TYPE_CHANGE from the list of notifiers that generate notifications. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13rtnetlink: Do not generate notifications for CHANGEADDR eventDavid Ahern1-1/+0
Changing hardware address generates redundant messages: [LINK]11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default link/ether 02:02:02:02:02:02 brd ff:ff:ff:ff:ff:ff [LINK]11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default link/ether 02:02:02:02:02:02 brd ff:ff:ff:ff:ff:ff Do not send a notification for the CHANGEADDR notifier. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13rtnetlink: Do not generate notification for UDP_TUNNEL_PUSH_INFODavid Ahern1-1/+0
NETDEV_UDP_TUNNEL_PUSH_INFO is an internal notifier; nothing userspace can do so don't generate a netlink notification. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13rtnetlink: Do not generate notifications for MTU eventsDavid Ahern1-2/+0
Changing MTU on a link currently causes 3 messages to be sent to userspace: [LINK]11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1490 qdisc noqueue state UNKNOWN group default link/ether f2:52:5c:6d:21:f3 brd ff:ff:ff:ff:ff:ff [LINK]11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default link/ether f2:52:5c:6d:21:f3 brd ff:ff:ff:ff:ff:ff [LINK]11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default link/ether f2:52:5c:6d:21:f3 brd ff:ff:ff:ff:ff:ff Remove the messages sent for PRE_CHANGE_MTU and CHANGE_MTU netdev events. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12gso: Support frag_list splitting with head_fragIlan Tayari1-1/+1
A driver may use build_skb() for received packets. These SKBs then have a head_frag. Since commit d7e8883cfcf4 ("net: make GRO aware of skb->head_frag"), GRO may build frag_list SKBs out of head_frag received SKBs. In such a case, the chained SKBs end up with a head_frag. Commit 07b26c9454a2 ("gso: Support partial splitting at the frag_list pointer") adds partial segmentation of frag_list SKB chains into individual SKBs. However, this is not done if the chained SKBs have any linear part, because the device may not be able to DMA the private linear buffer. A chained frag_list SKB with head_frag is wrongfully detected in this case as having a private linear part and thus falls back to software GSO, while in fact the linear part is backed by a DMA page just like any other frag. This causes low performance when forwarding those packets that were built with build_skb() Allow partial segmentation at the frag_list pointer for chained SKBs with head_frag. Note that such SKBs can only be created by GRO, when applied to received packets with head_frag. Also note that this change only affects the data path that performs the partial segmentation at frag_list pointer, and not any of the other more common data paths. Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12ipv6: Fix idev->addr_list corruptionRabin Vincent1-4/+7
addrconf_ifdown() removes elements from the idev->addr_list without holding the idev->lock. If this happens while the loop in __ipv6_dev_get_saddr() is handling the same element, that function ends up in an infinite loop: NMI watchdog: BUG: soft lockup - CPU#1 stuck for 23s! [test:1719] Call Trace: ipv6_get_saddr_eval+0x13c/0x3a0 __ipv6_dev_get_saddr+0xe4/0x1f0 ipv6_dev_get_saddr+0x1b4/0x204 ip6_dst_lookup_tail+0xcc/0x27c ip6_dst_lookup_flow+0x38/0x80 udpv6_sendmsg+0x708/0xba8 sock_sendmsg+0x18/0x30 SyS_sendto+0xb8/0xf8 syscall_common+0x34/0x58 Fixes: 6a923934c33 (Revert "ipv6: Revert optional address flusing on ifdown.") Signed-off-by: Rabin Vincent <rabinv@axis.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12l2tp: define parameters of l2tp_tunnel_find*() as "const"Guillaume Nault2-4/+4
l2tp_tunnel_find() and l2tp_tunnel_find_nth() don't modify "net". Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12l2tp: define parameters of l2tp_session_get*() as "const"Guillaume Nault2-5/+7
Make l2tp_pernet()'s parameter constant, so that l2tp_session_get*() can declare their "net" variable as "const". Also constify "ifname" in l2tp_session_get_by_ifname(). Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12net: xdp: don't export dev_change_xdp_fd()Johannes Berg1-1/+0
Since dev_change_xdp_fd() is only used in rtnetlink, which must be built-in, there's no reason to export dev_change_xdp_fd(). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-11net/smc: do not use IB_SEND_INLINE together with mapped dataUrsula Braun2-2/+1
smc specifies IB_SEND_INLINE for IB_WR_SEND ib_post_send calls, but provides a mapped buffer to be sent. This is inconsistent, since IB_SEND_INLINE works without mapped buffer. Problem has not been detected in the past, because tests had been limited to Connect X3 cards from Mellanox, whose mlx4 driver just ignored the IB_SEND_INLINE flag. For now, the IB_SEND_INLINE flag is removed. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-11net/smc: destruct non-accepted socketsUrsula Braun2-6/+9
Make sure sockets never accepted are removed cleanly. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-11net/smc: remove duplicate unhashUrsula Braun1-1/+0
unhash is already called in sock_put_work. Remove the second call. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-11net/smc: guarantee ConnClosed send after shutdown SHUT_WRUrsula Braun1-11/+25
State SMC_CLOSED should be reached only, if ConnClosed has been sent to the peer. If ConnClosed is received from the peer, a socket with shutdown SHUT_WR done, switches errorneously to state SMC_CLOSED, which means the peer socket is dangling. The local SMC socket is supposed to switch to state APPFINCLOSEWAIT to make sure smc_close_final() is called during socket close. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-11net/smc: no socket state changes in tasklet contextUrsula Braun6-20/+41
Several state changes occur during SMC socket closing. Currently state changes triggered locally occur in process context with lock_sock() taken while state changes triggered by peer occur in tasklet context with bh_lock_sock() taken. bh_lock_sock() does not wait till a lock_sock(() task in process context is finished. This may lead to races in socket state transitions resulting in dangling SMC-sockets, or it may lead to duplicate SMC socket freeing. This patch introduces a closing worker to run all state changes under lock_sock(). Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Reported-by: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-11net/smc: always call the POLL_IN part of sk_wake_asyncUrsula Braun1-2/+1
Wake up reading file descriptors for a closing socket as well, otherwise some socket applications may stall. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-11net/smc: guarantee reset of write_blocked for heavy workloadUrsula Braun1-1/+5
If peer indicates write_blocked, the cursor state of the received data should be send to the peer immediately (in smc_tx_consumer_update()). Afterwards the write_blocked indicator is cleared. If there is no free slot for another write request, sending is postponed to worker smc_tx_work, and the write_blocked indicator is not cleared. Therefore another clearing check is needed in smc_tx_work(). Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-11net/smc: return active RoCE port onlyUrsula Braun1-2/+5
SMC requires an active ib port on the RoCE device. smc_pnet_find_roce_resource() determines the matching RoCE device port according to the configured PNET table. Do not return the found RoCE device port, if it is not flagged active. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-11net/smc: remove useless smc_ib_devices_list checkUrsula Braun3-4/+1
The global event handler is created only, if the ib_device has already been used by at least one link group. It is guaranteed that there exists the corresponding entry in the smc_ib_devices list. Get rid of this superfluous check. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-11net/smc: get rid of old commentUrsula Braun1-2/+0
This patch removes an outdated comment. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-11bridge: netlink: register netdevice before executing changelinkIdo Schimmel1-2/+5
Peter reported a kernel oops when executing the following command: $ ip link add name test type bridge vlan_default_pvid 1 [13634.939408] BUG: unable to handle kernel NULL pointer dereference at 0000000000000190 [13634.939436] IP: __vlan_add+0x73/0x5f0 [...] [13634.939783] Call Trace: [13634.939791] ? pcpu_next_unpop+0x3b/0x50 [13634.939801] ? pcpu_alloc+0x3d2/0x680 [13634.939810] ? br_vlan_add+0x135/0x1b0 [13634.939820] ? __br_vlan_set_default_pvid.part.28+0x204/0x2b0 [13634.939834] ? br_changelink+0x120/0x4e0 [13634.939844] ? br_dev_newlink+0x50/0x70 [13634.939854] ? rtnl_newlink+0x5f5/0x8a0 [13634.939864] ? rtnl_newlink+0x176/0x8a0 [13634.939874] ? mem_cgroup_commit_charge+0x7c/0x4e0 [13634.939886] ? rtnetlink_rcv_msg+0xe1/0x220 [13634.939896] ? lookup_fast+0x52/0x370 [13634.939905] ? rtnl_newlink+0x8a0/0x8a0 [13634.939915] ? netlink_rcv_skb+0xa1/0xc0 [13634.939925] ? rtnetlink_rcv+0x24/0x30 [13634.939934] ? netlink_unicast+0x177/0x220 [13634.939944] ? netlink_sendmsg+0x2fe/0x3b0 [13634.939954] ? _copy_from_user+0x39/0x40 [13634.939964] ? sock_sendmsg+0x30/0x40 [13634.940159] ? ___sys_sendmsg+0x29d/0x2b0 [13634.940326] ? __alloc_pages_nodemask+0xdf/0x230 [13634.940478] ? mem_cgroup_commit_charge+0x7c/0x4e0 [13634.940592] ? mem_cgroup_try_charge+0x76/0x1a0 [13634.940701] ? __handle_mm_fault+0xdb9/0x10b0 [13634.940809] ? __sys_sendmsg+0x51/0x90 [13634.940917] ? entry_SYSCALL_64_fastpath+0x1e/0xad The problem is that the bridge's VLAN group is created after setting the default PVID, when registering the netdevice and executing its ndo_init(). Fix this by changing the order of both operations, so that br_changelink() is only processed after the netdevice is registered, when the VLAN group is already initialized. Fixes: b6677449dff6 ("bridge: netlink: call br_changelink() during br_dev_newlink()") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Peter V. Saveliev <peter@svinota.eu> Tested-by: Peter V. Saveliev <peter@svinota.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-11bridge: implement missing ndo_uninit()Ido Schimmel4-12/+21
While the bridge driver implements an ndo_init(), it was missing a symmetric ndo_uninit(), causing the different de-initialization operations to be scattered around its dellink() and destructor(). Implement a symmetric ndo_uninit() and remove the overlapping operations from its dellink() and destructor(). This is a prerequisite for the next patch, as it allows us to have a proper cleanup upon changelink() failure during the bridge's newlink(). Fixes: b6677449dff6 ("bridge: netlink: call br_changelink() during br_dev_newlink()") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-11bpf: pass sk to helper functionsWillem de Bruijn1-1/+6
BPF helper functions access socket fields through skb->sk. This is not set in ingress cgroup and socket filters. The association is only made in skb_set_owner_r once the filter has accepted the packet. Sk is available as socket lookup has taken place. Temporarily set skb->sk to sk in these cases. Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-11devlink: fix return value check in devlink_dpipe_header_put()Wei Yongjun1-1/+1
Fix the return value check which testing the wrong variable in devlink_dpipe_header_put(). Fixes: 1555d204e743 ("devlink: Support for pipeline debug (dpipe)") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-11bpf: remove struct bpf_prog_type_listJohannes Berg1-68/+7
There's no need to have struct bpf_prog_type_list since it just contains a list_head, the type, and the ops pointer. Since the types are densely packed and not actually dynamically registered, it's much easier and smaller to have an array of type->ops pointer. Also initialize this array statically to remove code needed to initialize it. In order to save duplicating the list, move it to a new header file and include it in the places needing it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-11l2tp: remove l2tp_session_find()Guillaume Nault2-53/+1
This function isn't used anymore. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-11l2tp: remove useless duplicate session detection in l2tp_netlinkGuillaume Nault1-5/+0
There's no point in checking for duplicate sessions at the beginning of l2tp_nl_cmd_session_create(); the ->session_create() callbacks already return -EEXIST when the session already exists. Furthermore, even if l2tp_session_find() returns NULL, a new session might be created right after the test. So relying on ->session_create() to avoid duplicate session is the only sane behaviour. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-11Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-nextDavid S. Miller3-4/+2
Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2017-04-11 1) Remove unused field from struct xfrm_mgr. 2) Code size optimizations for the xfrm prefix hash and address match. 3) Branch optimization for addr4_match. All patches from Alexey Dobriyan. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-09tcp: clear saved_syn in tcp_disconnect()Eric Dumazet1-0/+1
In the (very unlikely) case a passive socket becomes a listener, we do not want to duplicate its saved SYN headers. This would lead to double frees, use after free, and please hackers and various fuzzers Tested: 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, IPPROTO_TCP, TCP_SAVE_SYN, [1], 4) = 0 +0 fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 5) = 0 +0 < S 0:0(0) win 32972 <mss 1460,nop,wscale 7> +0 > S. 0:0(0) ack 1 <...> +.1 < . 1:1(0) ack 1 win 257 +0 accept(3, ..., ...) = 4 +0 connect(4, AF_UNSPEC, ...) = 0 +0 close(3) = 0 +0 bind(4, ..., ...) = 0 +0 listen(4, 5) = 0 +0 < S 0:0(0) win 32972 <mss 1460,nop,wscale 7> +0 > S. 0:0(0) ack 1 <...> +.1 < . 1:1(0) ack 1 win 257 Fixes: cd8ae85299d5 ("tcp: provide SYN headers for passive connections") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-09Revert "rtnl: Add support for netdev event to link messages"David S. Miller2-84/+10
This reverts commit def12888c161e6fec0702e5ec9c3962846e3a21d. As per discussion between Roopa Prabhu and David Ahern, it is advisable that we instead have the code collect the setlink triggered events into a bitmask emitted in the IFLA_EVENT netlink attribute. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-08netfilter: nf_ct_expect: use proper RCU list traversal/update APIsLiping Zhang2-5/+5
We should use proper RCU list APIs to manipulate help->expectations, as we can dump the conntrack's expectations via nfnetlink, i.e. in ctnetlink_exp_ct_dump_table(), where only rcu_read_lock is acquired. So for list traversal, use hlist_for_each_entry_rcu; for list add/del, use hlist_add_head_rcu and hlist_del_rcu. Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-08netfilter: ctnetlink: skip dumping expect when nfct_help(ct) is NULLLiping Zhang1-0/+6
For IPCTNL_MSG_EXP_GET, if the CTA_EXPECT_MASTER attr is specified, then the NLM_F_DUMP request will dump the expectations related to this connection tracking. But we forget to check whether the conntrack has nf_conn_help or not, so if nfct_help(ct) is NULL, oops will happen: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: ctnetlink_exp_ct_dump_table+0xf9/0x1e0 [nf_conntrack_netlink] Call Trace: ? ctnetlink_exp_ct_dump_table+0x75/0x1e0 [nf_conntrack_netlink] netlink_dump+0x124/0x2a0 __netlink_dump_start+0x161/0x190 ctnetlink_dump_exp_ct+0x16c/0x1bc [nf_conntrack_netlink] ? ctnetlink_exp_fill_info.constprop.33+0xf0/0xf0 [nf_conntrack_netlink] ? ctnetlink_glue_seqadj+0x20/0x20 [nf_conntrack_netlink] ctnetlink_get_expect+0x32e/0x370 [nf_conntrack_netlink] ? debug_lockdep_rcu_enabled+0x1d/0x20 nfnetlink_rcv_msg+0x60a/0x6a9 [nfnetlink] ? nfnetlink_rcv_msg+0x1b9/0x6a9 [nfnetlink] [...] Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-08netfilter: make it safer during the inet6_dev->addr_list traversalLiping Zhang2-1/+6
inet6_dev->addr_list is protected by inet6_dev->lock, so only using rcu_read_lock is not enough, we should acquire read_lock_bh(&idev->lock) before the inet6_dev->addr_list traversal. Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-08netfilter: ctnetlink: make it safer when checking the ct helper nameLiping Zhang1-5/+10
One CPU is doing ctnetlink_change_helper(), while another CPU is doing unhelp() at the same time. So even if help->helper is not NULL at first, the later statement strcmp(help->helper->name, ...) may still access the NULL pointer. So we must use rcu_read_lock and rcu_dereference to avoid such _bad_ thing happen. Fixes: f95d7a46bc57 ("netfilter: ctnetlink: Fix regression in CTA_HELP processing") Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-08netfilter: helper: Add the rcu lock when call __nf_conntrack_helper_findGao Feng2-7/+20
When invoke __nf_conntrack_helper_find, it needs the rcu lock to protect the helper module which would not be unloaded. Now there are two caller nf_conntrack_helper_try_module_get and ctnetlink_create_expect which don't hold rcu lock. And the other callers left like ctnetlink_change_helper, ctnetlink_create_conntrack, and ctnetlink_glue_attach_expect, they already hold the rcu lock or spin_lock_bh. Remove the rcu lock in functions nf_ct_helper_expectfn_find_by_name and nf_ct_helper_expectfn_find_by_symbol. Because they return one pointer which needs rcu lock, so their caller should hold the rcu lock, not in these two functions. Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-08netfilter: ctnetlink: using bit to represent the ct eventLiping Zhang1-2/+2
Otherwise, creating a new conntrack via nfnetlink: # conntrack -I -p udp -s 1.1.1.1 -d 2.2.2.2 -t 10 --sport 10 --dport 20 will emit the wrong ct events(where UPDATE should be NEW): # conntrack -E [UPDATE] udp 17 10 src=1.1.1.1 dst=2.2.2.2 sport=10 dport=20 [UNREPLIED] src=2.2.2.2 dst=1.1.1.1 sport=20 dport=10 mark=0 Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.