aboutsummaryrefslogtreecommitdiffstats
path: root/net (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-10-04net: bridge: Pass extack to down to netdev_master_upper_dev_linkDavid Ahern4-7/+15
Pass extack arg to br_add_if. Add messages for a couple of failures and pass arg to netdev_master_upper_dev_link. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04net: Add extack to upper device linkingDavid Ahern7-13/+19
Add extack arg to netdev_upper_dev_link and netdev_master_upper_dev_link Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04net: Add extack to ndo_add_slaveDavid Ahern3-6/+10
Pass extack to do_set_master and down to ndo_add_slave Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04net: Add extack to netdev_notifier_infoDavid Ahern1-32/+47
Add netlink_ext_ack to netdev_notifier_info to allow notifier handlers to return errors to userspace. Clean up the initialization in dev.c such that extack is easily added in subsequent patches where relevant. Specifically, remove the init call in call_netdevice_notifiers_info and have callers initalize on stack when info is declared. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04dev: advertise the new nsid when the netns iface changesNicolas Dichtel2-12/+30
x-netns interfaces are bound to two netns: the link netns and the upper netns. Usually, this kind of interfaces is created in the link netns and then moved to the upper netns. At the end, the interface is visible only in the upper netns. The link nsid is advertised via netlink in the upper netns, thus the user always knows where is the link part. There is no such mechanism in the link netns. When the interface is moved to another netns, the user cannot "follow" it. This patch adds a new netlink attribute which helps to follow an interface which moves to another netns. When the interface is unregistered, the new nsid is advertised. If the interface is a x-netns interface (ie rtnl_link_ops->get_link_net is defined), the nsid is allocated if needed. CC: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04net: cache skb_shinfo() in skb_try_coalesce()Eric Dumazet1-13/+16
Compiler does not really know that skb_shinfo(to|from) are constants in skb_try_coalesce(), lets cache their values to shrink code. We might even take care of skb_zcopy() calls later. $ size net/core/skbuff.o.before net/core/skbuff.o text data bss dec hex filename 40727 1298 0 42025 a429 net/core/skbuff.o.before 40631 1298 0 41929 a3c9 net/core/skbuff.o Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04rtnetlink: remove __rtnl_af_unregisterFlorian Westphal2-15/+3
switch the only caller to rtnl_af_unregister. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04rtnetlink: remove slave_validate callbackFlorian Westphal1-6/+0
no users in the tree. Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04net: core: fix kerneldoc commentFlorian Westphal1-1/+1
net/core/dev.c:1306: warning: No description found for parameter 'name' net/core/dev.c:1306: warning: Excess function parameter 'alias' description in 'dev_get_alias' Fixes: 6c5570016b97 ("net: core: decouple ifalias get/set from rtnl lock") Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03sctp: introduce round robin stream schedulerMarcelo Ricardo Leitner3-1/+205
This patch introduces RFC Draft ndata section 3.2 Priority Based Scheduler (SCTP_SS_RR). Works by maintaining a list of enqueued streams and tracking the last one used to send data. When the datamsg is done, it switches to the next stream. See-also: https://tools.ietf.org/html/draft-ietf-tsvwg-sctp-ndata-13 Tested-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03sctp: introduce priority based stream schedulerMarcelo Ricardo Leitner3-1/+351
This patch introduces RFC Draft ndata section 3.4 Priority Based Scheduler (SCTP_SS_PRIO). It works by having a struct sctp_stream_priority for each priority configured. This struct is then enlisted on a queue ordered per priority if, and only if, there is a stream with data queued, so that dequeueing is very straightforward: either finish current datamsg or simply dequeue from the highest priority queued, which is the next stream pointed, and that's it. If there are multiple streams assigned with the same priority and with data queued, it will do round robin amongst them while respecting datamsgs boundaries (when not using idata chunks), to be reasonably fair. We intentionally don't maintain a list of priorities nor a list of all streams with the same priority to save memory. The first would mean at least 2 other pointers per priority (which, for 1000 priorities, that can mean 16kB) and the second would also mean 2 other pointers but per stream. As SCTP supports up to 65535 streams on a given asoc, that's 1MB. This impacts when giving a priority to some stream, as we have to find out if the new priority is already being used and if we can free the old one, and also when tearing down. The new fields in struct sctp_stream_out_ext and sctp_stream are added under a union because that memory is to be shared with other schedulers. See-also: https://tools.ietf.org/html/draft-ietf-tsvwg-sctp-ndata-13 Tested-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03sctp: add sockopt to get/set stream scheduler parametersMarcelo Ricardo Leitner1-0/+77
As defined per RFC Draft ndata Section 4.3.3, named as SCTP_STREAM_SCHEDULER_VALUE. See-also: https://tools.ietf.org/html/draft-ietf-tsvwg-sctp-ndata-13 Tested-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03sctp: add sockopt to get/set stream schedulerMarcelo Ricardo Leitner1-0/+75
As defined per RFC Draft ndata Section 4.3.2, named as SCTP_STREAM_SCHEDULER. See-also: https://tools.ietf.org/html/draft-ietf-tsvwg-sctp-ndata-13 Tested-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03sctp: introduce stream scheduler foundationsMarcelo Ricardo Leitner5-35/+387
This patch introduces the hooks necessary to do stream scheduling, as per RFC Draft ndata. It also introduces the first scheduler, which is what we do today but now factored out: first come first served (FCFS). With stream scheduling now we have to track which chunk was enqueued on which stream and be able to select another other than the in front of the main outqueue. So we introduce a list on sctp_stream_out_ext structure for this purpose. We reuse sctp_chunk->transmitted_list space for the list above, as the chunk cannot belong to the two lists at the same time. By using the union in there, we can have distinct names for these moments. sctp_sched_ops are the operations expected to be implemented by each scheduler. The dequeueing is a bit particular to this implementation but it is to match how we dequeue packets today. We first dequeue and then check if it fits the packet and if not, we requeue it at head. Thus why we don't have a peek operation but have dequeue_done instead, which is called once the chunk can be safely considered as transmitted. The check removed from sctp_outq_flush is now performed by sctp_stream_outq_migrate, which is only called during assoc setup. (sctp_sendmsg() also checks for it) The only operation that is foreseen but not yet added here is a way to signalize that a new packet is starting or that the packet is done, for round robin scheduler per packet, but is intentionally left to the patch that actually implements it. Support for I-DATA chunks, also described in this RFC, with user message interleaving is straightforward as it just requires the schedulers to probe for the feature and ignore datamsg boundaries when dequeueing. See-also: https://tools.ietf.org/html/draft-ietf-tsvwg-sctp-ndata-13 Tested-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03sctp: introduce struct sctp_stream_out_extMarcelo Ricardo Leitner4-11/+42
With the stream schedulers, sctp_stream_out will become too big to be allocated by kmalloc and as we need to allocate with BH disabled, we cannot use __vmalloc in sctp_stream_init(). This patch moves out the stats from sctp_stream_out to sctp_stream_out_ext, which will be allocated only when the application tries to sendmsg something on it. Just the introduction of sctp_stream_out_ext would already fix the issue described above by splitting the allocation in two. Moving the stats to it also reduces the pressure on the allocator as we will ask for less memory atomically when creating the socket and we will use GFP_KERNEL later. Then, for stream schedulers, we will just use sctp_stream_out_ext. Tested-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03sctp: factor out stream->in allocationMarcelo Ricardo Leitner1-8/+28
There is 1 place allocating it and another reallocating. Move such procedures to a common function. v2: updated changelog Tested-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03sctp: factor out stream->out allocationMarcelo Ricardo Leitner1-20/+32
There is 1 place allocating it and 2 other reallocating. Move such procedures to a common function. Tested-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03sctp: silence warns on sctp_stream_init allocationsMarcelo Ricardo Leitner1-1/+7
As SCTP supports up to 65535 streams, that can lead to very large allocations in sctp_stream_init(). As Xin Long noticed, systems with small amounts of memory are more prone to not have enough memory and dump warnings on dmesg initiated by user actions. Thus, silence them. Also, if the reallocation of stream->out is not necessary, skip it and keep the memory we already have. Reported-by: Xin Long <lucien.xin@gmail.com> Tested-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03net: core: decouple ifalias get/set from rtnl lockFlorian Westphal3-24/+58
Device alias can be set by either rtnetlink (rtnl is held) or sysfs. rtnetlink hold the rtnl mutex, sysfs acquires it for this purpose. Add an extra mutex for it and use rcu to protect concurrent accesses. This allows the sysfs path to not take rtnl and would later allow to not hold it when dumping ifalias. Based on suggestion from Eric Dumazet. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03ipv4: ipmr: Don't forward packets already forwarded by hardwareYotam Gigi1-5/+32
Change the ipmr module to not forward packets if: - The packet is marked with the offload_mr_fwd_mark, and - Both input interface and output interface share the same parent ID. This way, a packet can go through partial multicast forwarding in the hardware, where it will be forwarded only to the devices that share the same parent ID (AKA, reside inside the same hardware). The kernel will forward the packet to all other interfaces. To do this, add the ipmr_offload_forward helper, which per skb, ingress VIF and egress VIF, returns whether the forwarding was offloaded to hardware. The ipmr_queue_xmit frees the skb and does not forward it if the result is a true value. All the forwarding path code compiles out when the CONFIG_NET_SWITCHDEV is not set. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03ipv4: ipmr: Add the parent ID field to VIF structYotam Gigi1-0/+11
In order to allow the ipmr module to do partial multicast forwarding according to the device parent ID, add the device parent ID field to the VIF struct. This way, the forwarding path can use the parent ID field without invoking switchdev calls, which requires the RTNL lock. When a new VIF is added, set the device parent ID field in it by invoking the switchdev_port_attr_get call. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02flow_dissector: dissect tunnel infoSimon Horman2-25/+100
Move dissection of tunnel info from the flower classifier to the flow dissector where all other dissection occurs. This should not have any behavioural affect on other users of the flow dissector. Signed-off-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01ipv4: Namespaceify tcp_fastopen_blackhole_timeout knobHaishuang Yan3-28/+24
Different namespace application might require different time period in second to disable Fastopen on active TCP sockets. Tested: Simulate following similar situation that the server's data gets dropped after 3WHS. C ---- syn-data ---> S C <--- syn/ack ----- S C ---- ack --------> S S (accept & write) C? X <- data ------ S [retry and timeout] And then print netstat of TCPFastOpenBlackhole, the counter increased as expected when the firewall blackhole issue is detected and active TFO is disabled. # cat /proc/net/netstat | awk '{print $91}' TCPFastOpenBlackhole 1 Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01ipv4: Namespaceify tcp_fastopen_key knobHaishuang Yan5-32/+63
Different namespace application might require different tcp_fastopen_key independently of the host. David Miller pointed out there is a leak without releasing the context of tcp_fastopen_key during netns teardown. So add the release action in exit_batch path. Tested: 1. Container namespace: # cat /proc/sys/net/ipv4/tcp_fastopen_key: 2817fff2-f803cf97-eadfd1f3-78c0992b cookie key in tcp syn packets: Fast Open Cookie Kind: TCP Fast Open Cookie (34) Length: 10 Fast Open Cookie: 1e5dd82a8c492ca9 2. Host: # cat /proc/sys/net/ipv4/tcp_fastopen_key: 107d7c5f-68eb2ac7-02fb06e6-ed341702 cookie key in tcp syn packets: Fast Open Cookie Kind: TCP Fast Open Cookie (34) Length: 10 Fast Open Cookie: e213c02bf0afbc8a Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01ipv4: Remove the 'publish' logic in tcp_fastopen_init_key_onceHaishuang Yan4-9/+4
The 'publish' logic is not necessary after commit dfea2aa65424 ("tcp: Do not call tcp_fastopen_reset_cipher from interrupt context"), because in tcp_fastopen_cookie_gen，it wouldn't call tcp_fastopen_init_key_once. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01ipv4: Namespaceify tcp_fastopen knobHaishuang Yan5-18/+20
Different namespace application might require enable TCP Fast Open feature independently of the host. This patch series continues making more of the TCP Fast Open related sysctl knobs be per net-namespace. Reported-by: Luca BRUNO <lucab@debian.org> Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01net: dsa: remove tag ops from the switch treeVivien Didelot2-4/+0
Now that the dsa_ptr is a dsa_port instance, there is no need to keep the tag operations in the dsa_switch_tree structure. Remove it. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01net: dsa: change dsa_ptr for a dsa_portVivien Didelot5-16/+12
With DSA, a master net device (CPU facing interface) has a dsa_ptr pointer to which hangs a dsa_switch_tree. This is not correct because a master interface is wired to a dedicated switch port, and because we can theoretically have several master interfaces pointing to several CPU ports of the same switch fabric. Change the master interface's dsa_ptr for the CPU dsa_port pointer. This is a step towards supporting multiple CPU ports. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01net: dsa: prepare master receive hot pathVivien Didelot2-0/+8
In preparation to make DSA master devices point to their corresponding CPU port instead of the whole tree, add copies of dst and rcv in the dsa_port structure so that we keep fast access in the receive hot path. Also keep the copies at the beginning of the dsa_port structure in order to ensure they are available in cacheline 1. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01net: dsa: add tagging ops to portVivien Didelot4-3/+4
The DSA tagging protocol operations are specific to each CPU port, thus the dsa_device_ops pointer belongs to the dsa_port structure. >From now on assign a slave's xmit copy from its CPU port tagging operations. This will ease the future support for multiple CPU ports. Also keep the tag_ops at the beginning of the dsa_port structure so that we ensure copies for hot path are in cacheline 1. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01net: dsa: use temporary dsa_device_ops variableVivien Didelot2-6/+10
When resolving the DSA tagging protocol used by a CPU switch, use a temporary "tag_ops" variable to store the dsa_device_ops instead of using directly dst->tag_ops. This will make the future patches moving this pointer around easier to read. There is no functional changes. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01net: dsa: use cpu_dp in master codeVivien Didelot1-20/+22
Make it clear that the master device is linked to a CPU port by using "cpu_dp" for the dsa_port variable in master.c instead of "port", then use a "port" variable to describe the port index, as usually seen in other places of DSA core. This will make the future patch touching dsa_ptr more readable. There is no functional changes. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01net: dsa: add master helper to look up slavesVivien Didelot9-101/+39
The DSA tagging code does not need to know about the DSA architecture, it only needs to return the slave device corresponding to the source port index (and eventually the source device index for cascade-capable switches) parsed from the frame received on the master device. For this purpose, provide an inline dsa_master_get_slave helper which validates the device and port indexes and look up the slave device. This makes the tagging rcv functions more concise and robust, and also makes dsa_get_cpu_port obsolete. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01net_sched: remove redundant assignment to retColin Ian King1-1/+0
The assignment of -EINVAL to variable ret is redundant as it is being overwritten on the following error exit paths or to the return value from the following call to basic_set_parms. Fix this up by removing it. Cleans up clang warning message: net/sched/cls_basic.c:185:2: warning: Value stored to 'err' is never read Fixes: 1d8134fea2eb ("net_sched: use idr to allocate basic filter handles") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01net: ipmr: make function ipmr_notifier_init staticColin Ian King1-1/+1
The function ipmr_notifier_init is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: warning: symbol 'ipmr_notifier_init' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-30net-ipv6: add support for sockopt(SOL_IPV6, IPV6_FREEBIND)Maciej Żenczykowski1-0/+12
So far we've been relying on sockopt(SOL_IP, IP_FREEBIND) being usable even on IPv6 sockets. However, it turns out it is perfectly reasonable to want to set freebind on an AF_INET6 SOCK_RAW socket - but there is no way to set any SOL_IP socket option on such a socket (they're all blindly errored out). One use case for this is to allow spoofing src ip on a raw socket via sendmsg cmsg. Tested: built, and booted # python >>> import socket >>> SOL_IP = socket.SOL_IP >>> SOL_IPV6 = socket.IPPROTO_IPV6 >>> IP_FREEBIND = 15 >>> IPV6_FREEBIND = 78 >>> s = socket.socket(socket.AF_INET6, socket.SOCK_DGRAM, 0) >>> s.getsockopt(SOL_IP, IP_FREEBIND) 0 >>> s.getsockopt(SOL_IPV6, IPV6_FREEBIND) 0 >>> s.setsockopt(SOL_IPV6, IPV6_FREEBIND, 1) >>> s.getsockopt(SOL_IP, IP_FREEBIND) 1 >>> s.getsockopt(SOL_IPV6, IPV6_FREEBIND) 1 Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-30net: ipv6: send NS for DAD when link operationally upMike Manning1-6/+6
The NS for DAD are sent on admin up as long as a valid qdisc is found. A race condition exists by which these packets will not egress the interface if the operational state of the lower device is not yet up. The solution is to delay DAD until the link is operationally up according to RFC2863. Rather than only doing this, follow the existing code checks by deferring IPv6 device initialization altogether. The fix allows DAD on devices like tunnels that are controlled by userspace control plane. The fix has no impact on regular deployments, but means that there is no IPv6 connectivity until the port has been opened in the case of port-based network access control, which should be desirable. Signed-off-by: Mike Manning <mmanning@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-29net: ipv4: remove fib_info arg to fib_check_nhDavid Ahern1-3/+3
fib_check_nh does not use the fib_info arg; remove t. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-29net: ipv4: remove fib_weightDavid Ahern1-9/+0
fib_weight in fib_info is set but not used. Remove it and the helpers for setting it. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-29tcp: fix under-evaluated ssthresh in TCP VegasHoang Tran1-1/+1
With the commit 76174004a0f19785 (tcp: do not slow start when cwnd equals ssthresh), the comparison to the reduced cwnd in tcp_vegas_ssthresh() would under-evaluate the ssthresh. Signed-off-by: Hoang Tran <hoang.tran@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-29net: bridge: add per-port group_fwd_mask with less restrictionsNikolay Aleksandrov4-2/+41
We need to be able to transparently forward most link-local frames via tunnels (e.g. vxlan, qinq). Currently the bridge's group_fwd_mask has a mask which restricts the forwarding of STP and LACP, but we need to be able to forward these over tunnels and control that forwarding on a per-port basis thus add a new per-port group_fwd_mask option which only disallows mac pause frames to be forwarded (they're always dropped anyway). The patch does not change the current default situation - all of the others are still restricted unless configured for forwarding. We have successfully tested this patch with LACP and STP forwarding over VxLAN and qinq tunnels. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28rtnetlink: rtnl_have_link_slave_info doesn't need rtnlFlorian Westphal1-3/+7
it can be switched to rcu. Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28rtnetlink: add helpers to dump netnsid informationFlorian Westphal1-11/+19
Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28rtnetlink: add helpers to dump vf informationFlorian Westphal1-19/+31
similar to earlier patches, split out more parts of this function to better see what is happening and where we assume rtnl is locked. Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28rtnetlink: add helper to put master and link ifindexesFlorian Westphal1-5/+27
rtnl_fill_ifinfo currently requires caller to hold the rtnl mutex. Unfortunately the function is quite large which makes it harder to see which spots require the lock, which spots assume it and which ones could do without. Add helpers to factor out the ifindex dumping, one can use rcu to avoid rtnl dependency. Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net_sched: use idr to allocate u32 filter handlesCong Wang1-41/+67
Instead of calling u32_lookup_ht() in a loop to find a unused handle, just switch to idr API to allocate new handles. u32 filters are special as the handle could contain a hash table id and a key id, so we need two IDR to allocate each of them. Cc: Chris Mi <chrism@mellanox.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net_sched: use idr to allocate basic filter handlesCong Wang1-15/+22
Instead of calling basic_get() in a loop to find a unused handle, just switch to idr API to allocate new handles. Cc: Chris Mi <chrism@mellanox.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net_sched: use idr to allocate bpf filter handlesCong Wang1-29/+28
Instead of calling cls_bpf_get() in a loop to find a unused handle, just switch to idr API to allocate new handles. Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Chris Mi <chrism@mellanox.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28inetpeer: speed up inetpeer_invalidate_tree()Eric Dumazet1-4/+7
As measured in my prior patch ("sch_netem: faster rb tree removal"), rbtree_postorder_for_each_entry_safe() is nice looking but much slower than using rb_next() directly, except when tree is small enough to fit in CPU caches (then the cost is the same) From: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-27net: mroute: Check if rule is a default ruleYotam Gigi1-0/+12
When the ipmr starts, it adds one default FIB rule that matches all packets and sends them to the DEFAULT (multicast) FIB table. A more complex rule can be added by user to specify that for a specific interface, a packet should be look up at either an arbitrary table or according to the l3mdev of the interface. For drivers willing to offload the ipmr logic into a hardware but don't want to offload all the FIB rules functionality, provide a function that can indicate whether the FIB rule is the default multicast rule, thus only one routing table is needed. This way, a driver can register to the FIB notification chain, get notifications about FIB rules added and trigger some kind of an internal abort mechanism when a non default rule is added by the user. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.