| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Conflicting commits, all resolutions pretty trivial:
drivers/bus/mhi/pci_generic.c
5c2c85315948 ("bus: mhi: pci-generic: configurable network interface MRU")
56f6f4c4eb2a ("bus: mhi: pci_generic: Apply no-op for wake using sideband wake boolean")
drivers/nfc/s3fwrn5/firmware.c
a0302ff5906a ("nfc: s3fwrn5: remove unnecessary label")
46573e3ab08f ("nfc: s3fwrn5: fix undefined parameter values in dev_err()")
801e541c79bb ("nfc: s3fwrn5: fix undefined parameter values in dev_err()")
MAINTAINERS
7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver")
8a7b46fa7902 ("MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.14-rc4, including fixes from bpf, can, WiFi
(mac80211) and netfilter trees.
Current release - regressions:
- mac80211: fix starting aggregation sessions on mesh interfaces
Current release - new code bugs:
- sctp: send pmtu probe only if packet loss in Search Complete state
- bnxt_en: add missing periodic PHC overflow check
- devlink: fix phys_port_name of virtual port and merge error
- hns3: change the method of obtaining default ptp cycle
- can: mcba_usb_start(): add missing urb->transfer_dma initialization
Previous releases - regressions:
- set true network header for ECN decapsulation
- mlx5e: RX, avoid possible data corruption w/ relaxed ordering and
LRO
- phy: re-add check for PHY_BRCM_DIS_TXCRXC_NOENRGY on the BCM54811
PHY
- sctp: fix return value check in __sctp_rcv_asconf_lookup
Previous releases - always broken:
- bpf:
- more spectre corner case fixes, introduce a BPF nospec
instruction for mitigating Spectre v4
- fix OOB read when printing XDP link fdinfo
- sockmap: fix cleanup related races
- mac80211: fix enabling 4-address mode on a sta vif after assoc
- can:
- raw: raw_setsockopt(): fix raw_rcv panic for sock UAF
- j1939: j1939_session_deactivate(): clarify lifetime of session
object, avoid UAF
- fix number of identical memory leaks in USB drivers
- tipc:
- do not blindly write skb_shinfo frags when doing decryption
- fix sleeping in tipc accept routine"
* tag 'net-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits)
gve: Update MAINTAINERS list
can: esd_usb2: fix memory leak
can: ems_usb: fix memory leak
can: usb_8dev: fix memory leak
can: mcba_usb_start(): add missing urb->transfer_dma initialization
can: hi311x: fix a signedness bug in hi3110_cmd()
MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver
bpf: Fix leakage due to insufficient speculative store bypass mitigation
bpf: Introduce BPF nospec instruction for mitigating Spectre v4
sis900: Fix missing pci_disable_device() in probe and remove
net: let flow have same hash in two directions
nfc: nfcsim: fix use after free during module unload
tulip: windbond-840: Fix missing pci_disable_device() in probe and remove
sctp: fix return value check in __sctp_rcv_asconf_lookup
nfc: s3fwrn5: fix undefined parameter values in dev_err()
net/mlx5: Fix mlx5_vport_tbl_attr chain from u16 to u32
net/mlx5e: Fix nullptr in mlx5e_hairpin_get_mdev()
net/mlx5: Unload device upon firmware fatal error
net/mlx5e: Fix page allocation failure for ptp-RQ over SF
net/mlx5e: Fix page allocation failure for trap-RQ over SF
...
|
|
There is no need in extra call indirection and check from impossible
flow where someone tries to set namespace without prior call
to devlink_alloc().
Instead of this extra logic and additional EXPORT_SYMBOL, use specialized
devlink allocation function that receives net namespace as an argument.
Such specialized API allows clear view when devlink initialized in wrong
net namespace and/or kernel users don't try to change devlink namespace
under the hood.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The change of namespaces during devlink reload calls to driver unload
before it accesses devlink parameters. The commands below causes to
use-after-free bug when trying to get flow steering mode.
* ip netns add n1
* devlink dev reload pci/0000:00:09.0 netns n1
==================================================================
BUG: KASAN: use-after-free in mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
Read of size 4 at addr ffff888009d04308 by task devlink/275
CPU: 6 PID: 275 Comm: devlink Not tainted 5.12.0-rc2+ #2853
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
dump_stack+0x93/0xc2
print_address_description.constprop.0+0x18/0x140
? mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
? mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
kasan_report.cold+0x7c/0xd8
? mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
devlink_nl_param_fill+0x1c8/0xe80
? __free_pages_ok+0x37a/0x8a0
? devlink_flash_update_timeout_notify+0xd0/0xd0
? lock_acquire+0x1a9/0x6d0
? fs_reclaim_acquire+0xb7/0x160
? lock_is_held_type+0x98/0x110
? 0xffffffff81000000
? lock_release+0x1f9/0x6c0
? fs_reclaim_release+0xa1/0xf0
? lock_downgrade+0x6d0/0x6d0
? lock_is_held_type+0x98/0x110
? lock_is_held_type+0x98/0x110
? memset+0x20/0x40
? __build_skb_around+0x1f8/0x2b0
devlink_param_notify+0x6d/0x180
devlink_reload+0x1c3/0x520
? devlink_remote_reload_actions_performed+0x30/0x30
? mutex_trylock+0x24b/0x2d0
? devlink_nl_cmd_reload+0x62b/0x1070
devlink_nl_cmd_reload+0x66d/0x1070
? devlink_reload+0x520/0x520
? devlink_get_from_attrs+0x1bc/0x260
? devlink_nl_pre_doit+0x64/0x4d0
genl_family_rcv_msg_doit+0x1e9/0x2f0
? mutex_lock_io_nested+0x1130/0x1130
? genl_family_rcv_msg_attrs_parse.constprop.0+0x240/0x240
? security_capable+0x51/0x90
genl_rcv_msg+0x27f/0x4a0
? genl_get_cmd+0x3c0/0x3c0
? lock_acquire+0x1a9/0x6d0
? devlink_reload+0x520/0x520
? lock_release+0x6c0/0x6c0
netlink_rcv_skb+0x11d/0x340
? genl_get_cmd+0x3c0/0x3c0
? netlink_ack+0x9f0/0x9f0
? lock_release+0x1f9/0x6c0
genl_rcv+0x24/0x40
netlink_unicast+0x433/0x700
? netlink_attachskb+0x730/0x730
? _copy_from_iter_full+0x178/0x650
? __alloc_skb+0x113/0x2b0
netlink_sendmsg+0x6f1/0xbd0
? netlink_unicast+0x700/0x700
? lock_is_held_type+0x98/0x110
? netlink_unicast+0x700/0x700
sock_sendmsg+0xb0/0xe0
__sys_sendto+0x193/0x240
? __x64_sys_getpeername+0xb0/0xb0
? do_sys_openat2+0x10b/0x370
? __up_read+0x1a1/0x7b0
? do_user_addr_fault+0x219/0xdc0
? __x64_sys_openat+0x120/0x1d0
? __x64_sys_open+0x1a0/0x1a0
__x64_sys_sendto+0xdd/0x1b0
? syscall_enter_from_user_mode+0x1d/0x50
do_syscall_64+0x2d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fc69d0af14a
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 76 c3 0f 1f 44 00 00 55 48 83 ec 30 44 89 4c
RSP: 002b:00007ffc1d8292f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007fc69d0af14a
RDX: 0000000000000038 RSI: 0000555f57c56440 RDI: 0000000000000003
RBP: 0000555f57c56410 R08: 00007fc69d17b200 R09: 000000000000000c
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
Allocated by task 146:
kasan_save_stack+0x1b/0x40
__kasan_kmalloc+0x99/0xc0
mlx5_init_fs+0xf0/0x1c50 [mlx5_core]
mlx5_load+0xd2/0x180 [mlx5_core]
mlx5_init_one+0x2f6/0x450 [mlx5_core]
probe_one+0x47d/0x6e0 [mlx5_core]
pci_device_probe+0x2a0/0x4a0
really_probe+0x20a/0xc90
driver_probe_device+0xd8/0x380
device_driver_attach+0x1df/0x250
__driver_attach+0xff/0x240
bus_for_each_dev+0x11e/0x1a0
bus_add_driver+0x309/0x570
driver_register+0x1ee/0x380
0xffffffffa06b8062
do_one_initcall+0xd5/0x410
do_init_module+0x1c8/0x760
load_module+0x6d8b/0x9650
__do_sys_finit_module+0x118/0x1b0
do_syscall_64+0x2d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
Freed by task 275:
kasan_save_stack+0x1b/0x40
kasan_set_track+0x1c/0x30
kasan_set_free_info+0x20/0x30
__kasan_slab_free+0x102/0x140
slab_free_freelist_hook+0x74/0x1b0
kfree+0xd7/0x2a0
mlx5_unload+0x16/0xb0 [mlx5_core]
mlx5_unload_one+0xae/0x120 [mlx5_core]
mlx5_devlink_reload_down+0x1bc/0x380 [mlx5_core]
devlink_reload+0x141/0x520
devlink_nl_cmd_reload+0x66d/0x1070
genl_family_rcv_msg_doit+0x1e9/0x2f0
genl_rcv_msg+0x27f/0x4a0
netlink_rcv_skb+0x11d/0x340
genl_rcv+0x24/0x40
netlink_unicast+0x433/0x700
netlink_sendmsg+0x6f1/0xbd0
sock_sendmsg+0xb0/0xe0
__sys_sendto+0x193/0x240
__x64_sys_sendto+0xdd/0x1b0
do_syscall_64+0x2d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
The buggy address belongs to the object at ffff888009d04300
which belongs to the cache kmalloc-128 of size 128
The buggy address is located 8 bytes inside of
128-byte region [ffff888009d04300, ffff888009d04380)
The buggy address belongs to the page:
page:0000000086a64ecc refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888009d04000 pfn:0x9d04
head:0000000086a64ecc order:1 compound_mapcount:0
flags: 0x4000000000010200(slab|head)
raw: 4000000000010200 ffffea0000203980 0000000200000002 ffff8880050428c0
raw: ffff888009d04000 000000008020001d 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888009d04200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888009d04280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff888009d04300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888009d04380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888009d04400: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
The right solution to devlink reload is to notify about deletion of
parameters, unload driver, change net namespaces, load driver and notify
about addition of parameters.
Fixes: 070c63f20f6c ("net: devlink: allow to change namespaces during reload")
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If skb_dst_set_noref() is invoked with a NULL dst, the 'slow_gro'
field is cleared, too. That could lead to wrong behavior if
the skb later enters the GRO stage.
Fix the potential issue replacing preserving a non-zero value of
the 'slow_gro' field.
Additionally, fix a comment typo.
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Fixes: 8a886b142bd0 ("sk_buff: track dst status in slow_gro")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/aa42529252dc8bb02bd42e8629427040d1058537.1627662501.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
lockdep_genl_is_held() and its caller arm not used now, just remove them.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Link: https://lore.kernel.org/r/20210729074854.8968-1-yajun.deng@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
No need for multiple spaces in variable declaration (the code does not
use them in other places). No functional change.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Several functions receive pointers to u8, sk_buff or other structs but
do not modify the contents so make them const. This allows doing the
same for local variables and in total makes the code a little bit safer.
This makes const also data passed as "unsigned long opt" argument to
nci_request() function. Usual flow for such functions is:
1. Receive "u8 *" and store it (the pointer) in a structure
allocated on stack (e.g. struct nci_set_config_param),
2. Call nci_request() or __nci_request() passing a callback function an
the pointer to the structure via an "unsigned long opt",
3. nci_request() calls the callback which dereferences "unsigned long
opt" in a read-only way.
This converts all above paths to use proper pointer to const data, so
entire flow is safer.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Few pointers to struct nfc_target and struct nfc_se can be made const.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Several functions receive pointers to u8, char or sk_buff but do not
modify the contents so make them const. This allows doing the same for
local variables and in total makes the code a little bit safer.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The nfc_llc_init() is used only in other __init annotated context.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The af_nfc_exit() is used only in other __exit annotated context
(nfc_exit()).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
refcount_t type should be used instead of int when fib_treeref is used as
a reference counter,and avoid use-after-free risks.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210729071350.28919-1-yajun.deng@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
DSA has gained the recent ability to deal gracefully with upper
interfaces it cannot offload, such as the bridge, bonding or team
drivers. When such uppers exist, the ports are still in standalone mode
as far as the hardware is concerned.
But when we deliver packets to the software bridge in order for that to
do the forwarding, there is an unpleasant surprise in that the bridge
will refuse to forward them. This is because we unconditionally set
skb->offload_fwd_mark = true, meaning that the bridge thinks the frames
were already forwarded in hardware by us.
Since dp->bridge_dev is populated only when there is hardware offload
for it, but not in the software fallback case, let's introduce a new
helper that can be called from the tagger data path which sets the
skb->offload_fwd_mark accordingly to zero when there is no hardware
offload for bridging. This lets the bridge forward packets back to other
interfaces of our switch, if needed.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
currently, only 'ingress' and 'clsact ingress' qdiscs store the tc 'chain
id' in the skb extension. However, userspace programs (like ovs) are able
to setup egress rules, and datapath gets confused in case it doesn't find
the 'chain id' for a packet that's "recirculated" by tc.
Change tcf_classify() to have the same semantic as tcf_classify_ingress()
so that a single function can be called in ingress / egress, using the tc
ingress / egress block respectively.
Suggested-by: Alaa Hleilel <alaa@nvidia.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On RX, a control packet with SJA1110 will have:
- an in-band control extension (DSA tag) composed of a header and an
optional trailer (if it is a timestamp frame). We can (and do) deduce
the source port and switch id from this.
- a VLAN header, which can either be the tag_8021q RX VLAN (pvid) or the
bridge VLAN. The sja1105_vlan_rcv() function attempts to deduce the
source port and switch id a second time from this.
The basic idea is that even though we don't need the source port
information from the tag_8021q header if it's a control packet, we do
need to strip that header before we pass it on to the network stack.
The problem is that we call sja1105_vlan_rcv for ports under VLAN-aware
bridges, and that function tells us it couldn't identify a tag_8021q
header, so we need to perform imprecise RX by VID. Well, we don't,
because we already know the source port and switch ID.
This patch drops the return value from sja1105_vlan_rcv and we just look
at the source_port and switch_id values from sja1105_rcv and sja1110_rcv
which were initialized to -1. If they are still -1 it means we need to
perform imprecise RX.
Fixes: 884be12f8566 ("net: dsa: sja1105: add support for imprecise RX")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently we have a compile-time default network
(MCTP_INITIAL_DEFAULT_NET). This change introduces a default_net field
on the net namespace, allowing future configuration for new interfaces.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that we have a neighbour implementation, hook it up to the output
path to set the dest hardware address for outgoing packets.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This change implements MCTP fragmentation (based on route & device MTU),
and corresponding reassembly.
The MCTP specification only allows for fragmentation on the originating
message endpoint, and reassembly on the destination endpoint -
intermediate nodes do not need to reassemble/refragment. Consequently,
we only fragment in the local transmit path, and reassemble
locally-bound packets. Messages are required to be in-order, so we
simply cancel reassembly on out-of-order or missing packets.
In the fragmentation path, we just break up the message into MTU-sized
fragments; the skb structure is a simple copy for now, which we can later
improve with a shared data implementation.
For reassembly, we keep track of incoming message fragments using the
existing tag infrastructure, allocating a key on the (src,dest,tag)
tuple, and reassembles matching fragments into a skb->frag_list.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Start filling-out the socket syscalls: bind, sendmsg & recvmsg.
This requires an input route implementation, so we add to
mctp_route_input, allowing lookups on binds & message tags. This just
handles single-packet messages at present, we will add fragmentation in
a future change.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This change adds the netlink interfaces for manipulating the MCTP
neighbour table.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add an initial neighbour table implementation, to be used in the route
output path.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This change adds RTM_GETROUTE, RTM_NEWROUTE & RTM_DELROUTE handlers,
allowing management of the MCTP route table.
Includes changes from Jeremy Kerr <jk@codeconstruct.com.au>.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a simple routing table, and a couple of route output handlers, and
the mctp packet_type & handler.
Includes changes from Matt Johnston <matt@codeconstruct.com.au>.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This change adds the infrastructure for managing MCTP netdevices; we add
a pointer to the AF_MCTP-specific data to struct netdevice, and hook up
the rtnetlink operations for adding and removing addresses.
Includes changes from Matt Johnston <matt@codeconstruct.com.au>.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add an empty socket implementation, plus initialisation/destruction
handlers.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add basic Kconfig, an initial (empty) af_mctp source object, and
{AF,PF}_MCTP definitions, and the required definitions for a new
protocol type.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This change leverages the infrastructure introduced by the previous
patches to allow soft devices passing to the GRO engine owned skbs
without impacting the fast-path.
It's up to the GRO caller ensuring the slow_gro bit validity before
invoking the GRO engine. The new helper skb_prepare_for_gro() is
introduced for that goal.
On slow_gro, skbs are aggregated only with equal sk.
Additionally, skb truesize on GRO recycle and free is correctly
updated so that sk wmem is not changed by the GRO processing.
rfc-> v1:
- fixed bad truesize on dev_gro_receive NAPI_FREE
- use the existing state bit
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After the previous patches, at GRO time, skb->slow_gro is
usually 0, unless the packets comes from some H/W offload
slowpath or tunnel.
We can optimize the GRO code assuming !skb->slow_gro is likely.
This remove multiple conditionals in the most common path, at the
price of an additional one when we hit the above "slow-paths".
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Similar to the previous one, but tracking the
active_extensions field status.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2021-07-29
The following pull-request contains BPF updates for your *net* tree.
We've added 9 non-merge commits during the last 14 day(s) which contain
a total of 20 files changed, 446 insertions(+), 138 deletions(-).
The main changes are:
1) Fix UBSAN out-of-bounds splat for showing XDP link fdinfo, from Lorenz Bauer.
2) Fix insufficient Spectre v4 mitigation in BPF runtime, from Daniel Borkmann,
Piotr Krysiuk and Benedict Schlueter.
3) Batch of fixes for BPF sockmap found under stress testing, from John Fastabend.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently the following script:
1. ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up
2. ip link set swp2 up && ip link set swp2 master br0
3. ip link set swp3 up && ip link set swp3 master br0
4. ip link set swp4 up && ip link set swp4 master br0
5. bridge vlan del dev swp2 vid 1
6. bridge vlan del dev swp3 vid 1
7. ip link set swp4 nomaster
8. ip link set swp3 nomaster
produces the following output:
[ 641.010738] sja1105 spi0.1: port 2 failed to delete 00:1f:7b:63:02:48 vid 1 from fdb: -2
[ swp2, swp3 and br0 all have the same MAC address, the one listed above ]
In short, this happens because the number of FDB entry additions
notified to switchdev is unbalanced with the number of deletions.
At step 1, the bridge has a random MAC address. At step 2, the
br_fdb_replay of swp2 receives this initial MAC address. Then the bridge
inherits the MAC address of swp2 via br_fdb_change_mac_address(), and it
notifies switchdev (only swp2 at this point) of the deletion of the
random MAC address and the addition of 00:1f:7b:63:02:48 as a local FDB
entry with fdb->dst == swp2, in VLANs 0 and the default_pvid (1).
During step 7:
del_nbp
-> br_fdb_delete_by_port(br, p, vid=0, do_all=1);
-> fdb_delete_local(br, p, f);
br_fdb_delete_by_port() deletes all entries towards the ports,
regardless of vid, because do_all is 1.
fdb_delete_local() has logic to migrate local FDB entries deleted from
one port to another port which shares the same MAC address and is in the
same VLAN, or to the bridge device itself. This migration happens
without notifying switchdev of the deletion on the old port and the
addition on the new one, just fdb->dst is changed and the added_by_user
flag is cleared.
In the example above, the del_nbp(swp4) causes the
"addr 00:1f:7b:63:02:48 vid 1" local FDB entry with fdb->dst == swp4
that existed up until then to be migrated directly towards the bridge
(fdb->dst == NULL). This is because it cannot be migrated to any of the
other ports (swp2 and swp3 are not in VLAN 1).
After the migration to br0 takes place, swp4 requests a deletion replay
of all FDB entries. Since the "addr 00:1f:7b:63:02:48 vid 1" entry now
point towards the bridge, a deletion of it is replayed. There was just
a prior addition of this address, so the switchdev driver deletes this
entry.
Then, the del_nbp(swp3) at step 8 triggers another br_fdb_replay, and
switchdev is notified again to delete "addr 00:1f:7b:63:02:48 vid 1".
But it can't because it no longer has it, so it returns -ENOENT.
There are other possibilities to trigger this issue, but this is by far
the simplest to explain.
To fix this, we must avoid the situation where the addition of an FDB
entry is notified to switchdev as a local entry on a port, and the
deletion is notified on the bridge itself.
Considering that the 2 types of FDB entries are completely equivalent
and we cannot have the same MAC address as a local entry on 2 bridge
ports, or on a bridge port and pointing towards the bridge at the same
time, it makes sense to hide away from switchdev completely the fact
that a local FDB entry is associated with a given bridge port at all.
Just say that it points towards the bridge, it should make no difference
whatsoever to the switchdev driver and should even lead to a simpler
overall implementation, will less cases to handle.
This also avoids any modification at all to the core bridge driver, just
what is reported to switchdev changes. With the local/permanent entries
on bridge ports being already reported to user space, it is hard to
believe that the bridge behavior can change in any backwards-incompatible
way such as making all local FDB entries point towards the bridge.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently when a switchdev port joins a bridge, we replay all FDB
entries pointing towards that port or towards the bridge.
However, this is insufficient in certain situations:
(a) DSA, through its assisted_learning_on_cpu_port logic, snoops
dynamically learned FDB entries on foreign interfaces.
These are FDB entries that are pointing neither towards the newly
joined switchdev port, nor towards the bridge. So these addresses
would be missed when joining a bridge where a foreign interface has
already learned some addresses, and they would also linger on if the
DSA port leaves the bridge before the foreign interface forgets them.
None of this happens if we replay the entire FDB when the port joins.
(b) There is a desire to treat local FDB entries on a port (i.e. the
port's termination MAC address) identically to FDB entries pointing
towards the bridge itself. More details on the reason behind this in
the next patch. The point is that this cannot be done given the
current structure of br_fdb_replay() in this situation:
ip link set swp0 master br0 # br0 inherits its MAC address from swp0
ip link set swp1 master br0
What is desirable is that when swp1 joins the bridge, br_fdb_replay()
also notifies swp1 of br0's MAC address, but this won't in fact
happen because the MAC address of br0 does not have fdb->dst == NULL
(it doesn't point towards the bridge), but it has fdb->dst == swp0.
So our current logic makes it impossible for that address to be
replayed. But if we dump the entire FDB instead of just the entries
with fdb->dst == swp1 and fdb->dst == NULL, then the inherited MAC
address of br0 will be replayed too, which is what we need.
A natural question arises: say there is an FDB entry to be replayed,
like a MAC address dynamically learned on a foreign interface that
belongs to a bridge where no switchdev port has joined yet. If 10
switchdev ports belonging to the same driver join this bridge, one by
one, won't every port get notified 10 times of the foreign FDB entry,
amounting to a total of 100 notifications for this FDB entry in the
switchdev driver?
Well, yes, but this is where the "void *ctx" argument for br_fdb_replay
is useful: every port of the switchdev driver is notified whenever any
other port requests an FDB replay, but because the replay was initiated
by a different port, its context is different from the initiating port's
context, so it ignores those replays.
So the foreign FDB entry will be installed only 10 times, once per port.
This is done so that the following 4 code paths are always well balanced:
(a) addition of foreign FDB entry is replayed when port joins bridge
(b) deletion of foreign FDB entry is replayed when port leaves bridge
(c) addition of foreign FDB entry is notified to all ports currently in bridge
(c) deletion of foreign FDB entry is notified to all ports currently in bridge
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
unix_gc() assumes that candidate sockets can never gain an external
reference (i.e. be installed into an fd) while the unix_gc_lock is
held. Except for MSG_PEEK this is guaranteed by modifying inflight
count under the unix_gc_lock.
MSG_PEEK does not touch any variable protected by unix_gc_lock (file
count is not), yet it needs to be serialized with garbage collection.
Do this by locking/unlocking unix_gc_lock:
1) increment file count
2) lock/unlock barrier to make sure incremented file count is visible
to garbage collection
3) install file into fd
This is a lock barrier (unlike smp_mb()) that ensures that garbage
collection is run completely before or completely after the barrier.
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently, when doing rate limiting using the tc-police(8) action, the
easiest way is to simply drop the packets which exceed or conform the
configured bandwidth limit. Add a new option to tc-skbmod(8), so that
users may use the ECN [1] extension to explicitly inform the receiver
about the congestion instead of dropping packets "on the floor".
The 2 least significant bits of the Traffic Class field in IPv4 and IPv6
headers are used to represent different ECN states [2]:
0b00: "Non ECN-Capable Transport", Non-ECT
0b10: "ECN Capable Transport", ECT(0)
0b01: "ECN Capable Transport", ECT(1)
0b11: "Congestion Encountered", CE
As an example:
$ tc filter add dev eth0 parent 1: protocol ip prio 10 \
matchall action skbmod ecn
Doing the above marks all ECT(0) and ECT(1) packets as CE. It does NOT
affect Non-ECT or non-IP packets. In the tc-police scenario mentioned
above, users may pipe a tc-police action and a tc-skbmod "ecn" action
together to achieve ECN-based rate limiting.
For TCP connections, upon receiving a CE packet, the receiver will respond
with an ECE packet, asking the sender to reduce their congestion window.
However ECN also works with other L4 protocols e.g. DCCP and SCTP [2], and
our implementation does not touch or care about L4 headers.
The updated tc-skbmod SYNOPSIS looks like the following:
tc ... action skbmod { set SETTABLE | swap SWAPPABLE | ecn } ...
Only one of "set", "swap" or "ecn" shall be used in a single tc-skbmod
command. Trying to use more than one of them at a time is considered
undefined behavior; pipe multiple tc-skbmod commands together instead.
"set" and "swap" only affect Ethernet packets, while "ecn" only affects
IPv{4,6} packets.
It is also worth mentioning that, in theory, the same effect could be
achieved by piping a "police" action and a "bpf" action using the
bpf_skb_ecn_set_ce() helper, but this requires eBPF programming from the
user, thus impractical.
Depends on patch "net/sched: act_skbmod: Skip non-Ethernet packets".
[1] https://datatracker.ietf.org/doc/html/rfc3168
[2] https://en.wikipedia.org/wiki/Explicit_Congestion_Notification
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
using same source and destination ip/port for flow hash calculation
within the two directions.
Signed-off-by: zhang kai <zhangkaiheb@126.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Both registered flag and devlink pointer are set at the same time
and indicate the same thing - devlink/devlink_port are ready. Instead
of checking ->registered use devlink pointer as an indication.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As Ben Hutchings noticed, this check should have been inverted: the call
returns true in case of success.
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Fixes: 0c5dc070ff3d ("sctp: validate from_addr_param return")
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If backlog handler is running during a tear down operation we may enqueue
data on the ingress msg queue while tear down is trying to free it.
sk_psock_backlog()
sk_psock_handle_skb()
skb_psock_skb_ingress()
sk_psock_skb_ingress_enqueue()
sk_psock_queue_msg(psock,msg)
spin_lock(ingress_lock)
sk_psock_zap_ingress()
_sk_psock_purge_ingerss_msg()
_sk_psock_purge_ingress_msg()
-- free ingress_msg list --
spin_unlock(ingress_lock)
spin_lock(ingress_lock)
list_add_tail(msg,ingress_msg) <- entry on list with no one
left to free it.
spin_unlock(ingress_lock)
To fix we only enqueue from backlog if the ENABLED bit is set. The tear
down logic clears the bit with ingress_lock set so we wont enqueue the
msg in the last step.
Fixes: 799aa7f98d53 ("skmsg: Avoid lock_sock() in sk_psock_backlog()")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210727160500.1713554-4-john.fastabend@gmail.com
|
|
Its possible if a socket is closed and the receive thread is under memory
pressure it may have cached a skb. We need to ensure these skbs are
free'd along with the normal ingress_skb queue.
Before 799aa7f98d53 ("skmsg: Avoid lock_sock() in sk_psock_backlog()") tear
down and backlog processing both had sock_lock for the common case of
socket close or unhash. So it was not possible to have both running in
parrallel so all we would need is the kfree in those kernels.
But, latest kernels include the commit 799aa7f98d5e and this requires a
bit more work. Without the ingress_lock guarding reading/writing the
state->skb case its possible the tear down could run before the state
update causing it to leak memory or worse when the backlog reads the state
it could potentially run interleaved with the tear down and we might end up
free'ing the state->skb from tear down side but already have the reference
from backlog side. To resolve such races we wrap accesses in ingress_lock
on both sides serializing tear down and backlog case. In both cases this
only happens after an EAGAIN error case so having an extra lock in place
is likely fine. The normal path will skip the locks.
Note, we check state->skb before grabbing lock. This works because
we can only enqueue with the mutex we hold already. Avoiding a race
on adding state->skb after the check. And if tear down path is running
that is also fine if the tear down path then removes state->skb we
will simply set skb=NULL and the subsequent goto is skipped. This
slight complication avoids locking in normal case.
With this fix we no longer see this warning splat from tcp side on
socket close when we hit the above case with redirect to ingress self.
[224913.935822] WARNING: CPU: 3 PID: 32100 at net/core/stream.c:208 sk_stream_kill_queues+0x212/0x220
[224913.935841] Modules linked in: fuse overlay bpf_preload x86_pkg_temp_thermal intel_uncore wmi_bmof squashfs sch_fq_codel efivarfs ip_tables x_tables uas xhci_pci ixgbe mdio xfrm_algo xhci_hcd wmi
[224913.935897] CPU: 3 PID: 32100 Comm: fgs-bench Tainted: G I 5.14.0-rc1alu+ #181
[224913.935908] Hardware name: Dell Inc. Precision 5820 Tower/002KVM, BIOS 1.9.2 01/24/2019
[224913.935914] RIP: 0010:sk_stream_kill_queues+0x212/0x220
[224913.935923] Code: 8b 83 20 02 00 00 85 c0 75 20 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 89 df e8 2b 11 fe ff eb c3 0f 0b e9 7c ff ff ff 0f 0b eb ce <0f> 0b 5b 5d 41 5c 41 5d 41 5e 41 5f c3 90 0f 1f 44 00 00 41 57 41
[224913.935932] RSP: 0018:ffff88816271fd38 EFLAGS: 00010206
[224913.935941] RAX: 0000000000000ae8 RBX: ffff88815acd5240 RCX: dffffc0000000000
[224913.935948] RDX: 0000000000000003 RSI: 0000000000000ae8 RDI: ffff88815acd5460
[224913.935954] RBP: ffff88815acd5460 R08: ffffffff955c0ae8 R09: fffffbfff2e6f543
[224913.935961] R10: ffffffff9737aa17 R11: fffffbfff2e6f542 R12: ffff88815acd5390
[224913.935967] R13: ffff88815acd5480 R14: ffffffff98d0c080 R15: ffffffff96267500
[224913.935974] FS: 00007f86e6bd1700(0000) GS:ffff888451cc0000(0000) knlGS:0000000000000000
[224913.935981] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[224913.935988] CR2: 000000c0008eb000 CR3: 00000001020e0005 CR4: 00000000003706e0
[224913.935994] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[224913.936000] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[224913.936007] Call Trace:
[224913.936016] inet_csk_destroy_sock+0xba/0x1f0
[224913.936033] __tcp_close+0x620/0x790
[224913.936047] tcp_close+0x20/0x80
[224913.936056] inet_release+0x8f/0xf0
[224913.936070] __sock_release+0x72/0x120
[224913.936083] sock_close+0x14/0x20
Fixes: a136678c0bdbb ("bpf: sk_msg, zap ingress queue on psock down")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210727160500.1713554-3-john.fastabend@gmail.com
|
|
We don't want strparser to run and pass skbs into skmsg handlers when
the psock is null. We just sk_drop them in this case. When removing
a live socket from map it means extra drops that we do not need to
incur. Move the zap below strparser close to avoid this condition.
This way we stop the stream parser first stopping it from processing
packets and then delete the psock.
Fixes: a136678c0bdbb ("bpf: sk_msg, zap ingress queue on psock down")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210727160500.1713554-2-john.fastabend@gmail.com
|
|
Syzbot reported warning in netlbl_cipsov4_add(). The
problem was in too big doi_def->map.std->lvl.local_size
passed to kcalloc(). Since this value comes from userpace there is
no need to warn if value is not correct.
The same problem may occur with other kcalloc() calls in
this function, so, I've added __GFP_NOWARN flag to all
kcalloc() calls there.
Reported-and-tested-by: syzbot+cdd51ee2e6b0b2e18c0d@syzkaller.appspotmail.com
Fixes: 96cb8e3313c7 ("[NetLabel]: CIPSOv4 and Unlabeled packet integration")
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All other user triggered operations are gone from ndo_ioctl, so move
the SIOCBOND family into a custom operation as well.
The .ndo_ioctl() helper is no longer called by the dev_ioctl.c code now,
but there are still a few definitions in obsolete wireless drivers as well
as the appletalk and ieee802154 layers to call SIOCSIFADDR/SIOCGIFADDR
helpers from inside the kernel.
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Working towards obsoleting the .ndo_do_ioctl operation entirely,
stop passing the SIOCBRADDIF/SIOCBRDELIF device ioctl commands
into this callback.
My first attempt was to add another ndo_siocbr() callback, but
as there is only a single driver that takes these commands and
there is already a hook mechanism to call directly into this
driver, extend this hook instead, and use it for both the
deviceless and the device specific ioctl commands.
Cc: Roopa Prabhu <roopa@nvidia.com>
Cc: Nikolay Aleksandrov <nikolay@nvidia.com>
Cc: bridge@lists.linux-foundation.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some drivers that use SIOCDEVPRIVATE ioctl commands modify
the ifreq structure and expect it to be passed back to user
space, which has never really happened for compat mode
because the calling these drivers through ndo_do_ioctl
requires overwriting the ifr_data pointer.
Now that all drivers are converted to ndo_siocdevprivate,
change it to handle this correctly in both compat and
native mode.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In order to further reduce the scope of ndo_do_ioctl(), move
out the SIOCWANDEV handling into a new network device operation
function.
Adjust the prototype to only pass the if_settings sub-structure
in place of the ifreq, and remove the redundant 'cmd' argument
in the process.
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Cc: "Jan \"Yenya\" Kasprzak" <kas@fi.muni.cz>
Cc: Kevin Curtis <kevin.curtis@farsite.co.uk>
Cc: Zhao Qiang <qiang.zhao@nxp.com>
Cc: Martin Schiller <ms@dev.tdt.de>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: linux-x25@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Most users of ndo_do_ioctl are ethernet drivers that implement
the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware
timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP.
Separate these from the few drivers that use ndo_do_ioctl to
implement SIOCBOND, SIOCBR and SIOCWANDEV commands.
This is a purely cosmetic change intended to help readers find
their way through the implementation.
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Vladimir Oltean <olteanv@gmail.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The compat handlers for SIOCDEVPRIVATE are incorrect for any driver that
passes data as part of struct ifreq rather than as an ifr_data pointer, or
that passes data back this way, since the compat_ifr_data_ioctl() helper
overwrites the ifr_data pointer and does not copy anything back out.
Since all drivers using devprivate commands are now converted to the
new .ndo_siocdevprivate callback, fix this by adding the missing piece
and passing the pointer separately the whole way.
This further unifies the native and compat logic for socket ioctls,
as the new code now passes the correct pointer as well as the correct
data for both native and compat ioctls.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The various ipv4 and ipv6 tunnel drivers each implement a set
of 12 SIOCDEVPRIVATE commands for managing tunnels. These
all work correctly in compat mode.
Move them over to the new .ndo_siocdevprivate operation.
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
phonet has a single private ioctl that is broken in compat
mode on big-endian machines today because the data returned
from it is never copied back to user space.
Move it over to the ndo_siocdevprivate callback, which also
fixes the compat issue.
Cc: Remi Denis-Courmont <courmisch@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Rémi Denis-Courmont <courmisch@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
Jakub Kicinski
Linus Torvalds
Leon Romanovsky
Paolo Abeni
Yajun Deng
Krzysztof Kozlowski
Vladimir Oltean
Davide Caratti
Matt Johnston
Jeremy Kerr
David S. Miller
Miklos Szeredi
Peilin Ye
zhang kai
Marcelo Ricardo Leitner
John Fastabend
Pavel Skripkin
Arnd Bergmann