aboutsummaryrefslogtreecommitdiffstats
path: root/net (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-12-01rds: tcp: correctly sequence cleanup on netns deletion.Sowmini Varadhan3-6/+7
Commit 8edc3affc077 ("rds: tcp: Take explicit refcounts on struct net") introduces a regression in rds-tcp netns cleanup. The cleanup_net(), (and thus rds_tcp_dev_event notification) is only called from put_net() when all netns refcounts go to 0, but this cannot happen if the rds_connection itself is holding a c_net ref that it expects to release in rds_tcp_kill_sock. Instead, the rds_tcp_kill_sock callback should make sure to tear down state carefully, ensuring that the socket teardown is only done after all data-structures and workqs that depend on it are quiesced. The original motivation for commit 8edc3affc077 ("rds: tcp: Take explicit refcounts on struct net") was to resolve a race condition reported by syzkaller where workqs for tx/rx/connect were triggered after the namespace was deleted. Those worker threads should have been cancelled/flushed before socket tear-down and indeed, rds_conn_path_destroy() does try to sequence this by doing /* cancel cp_send_w */ /* cancel cp_recv_w */ /* flush cp_down_w */ /* free data structures */ Here the "flush cp_down_w" will trigger rds_conn_shutdown and thus invoke rds_tcp_conn_path_shutdown() to close the tcp socket, so that we ought to have satisfied the requirement that "socket-close is done after all other dependent state is quiesced". However, rds_conn_shutdown has a bug in that it *always* triggers the reconnect workq (and if connection is successful, we always restart tx/rx workqs so with the right timing, we risk the race conditions reported by syzkaller). Netns deletion is like module teardown- no need to restart a reconnect in this case. We can use the c_destroy_in_prog bit to avoid restarting the reconnect. Fixes: 8edc3affc077 ("rds: tcp: Take explicit refcounts on struct net") Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-01rds: tcp: remove redundant function rds_tcp_conn_paths_destroy()Sowmini Varadhan1-24/+1
A side-effect of Commit c14b0366813a ("rds: tcp: set linger to 1 when unloading a rds-tcp") is that we always send a RST on the tcp connection for rds_conn_destroy(), so rds_tcp_conn_paths_destroy() is not needed any more and is removed in this patch. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-01tipc: fall back to smaller MTU if allocation of local send skb failsJon Maloy4-13/+55
When sending node local messages the code is using an 'mtu' of 66060 bytes to avoid unnecessary fragmentation. During situations of low memory tipc_msg_build() may sometimes fail to allocate such large buffers, resulting in unnecessary send failures. This can easily be remedied by falling back to a smaller MTU, and then reassemble the buffer chain as if the message were arriving from a remote node. At the same time, we change the initial MTU setting of the broadcast link to a lower value, so that large messages always are fragmented into smaller buffers even when we run in single node mode. Apart from obtaining the same advantage as for the 'fallback' solution above, this turns out to give a significant performance improvement. This can probably be explained with the __pskb_copy() operation performed on the buffer for each recipient during reception. We found the optimal value for this, considering the most relevant skb pool, to be 3744 bytes. Acked-by: Ying Xue <ying.xue@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-01tipc: call tipc_rcv() only if bearer is up in tipc_udp_recv()Tommi Rantala1-4/+0
Remove the second tipc_rcv() call in tipc_udp_recv(). We have just checked that the bearer is not up, and calling tipc_rcv() with a bearer that is not up leads to a TIPC div-by-zero crash in tipc_node_calculate_timer(). The crash is rare in practice, but can happen like this: We're enabling a bearer, but it's not yet up and fully initialized. At the same time we receive a discovery packet, and in tipc_udp_recv() we end up calling tipc_rcv() with the not-yet-initialized bearer, causing later the div-by-zero crash in tipc_node_calculate_timer(). Jon Maloy explains the impact of removing the second tipc_rcv() call: "link setup in the worst case will be delayed until the next arriving discovery messages, 1 sec later, and this is an acceptable delay." As the tipc_rcv() call is removed, just leave the function via the rcu_out label, so that we will kfree_skb(). [ 12.590450] Own node address <1.1.1>, network identity 1 [ 12.668088] divide error: 0000 [#1] SMP [ 12.676952] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.14.2-dirty #1 [ 12.679225] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014 [ 12.682095] task: ffff8c2a761edb80 task.stack: ffffa41cc0cac000 [ 12.684087] RIP: 0010:tipc_node_calculate_timer.isra.12+0x45/0x60 [tipc] [ 12.686486] RSP: 0018:ffff8c2a7fc838a0 EFLAGS: 00010246 [ 12.688451] RAX: 0000000000000000 RBX: ffff8c2a5b382600 RCX: 0000000000000000 [ 12.691197] RDX: 0000000000000000 RSI: ffff8c2a5b382600 RDI: ffff8c2a5b382600 [ 12.693945] RBP: ffff8c2a7fc838b0 R08: 0000000000000001 R09: 0000000000000001 [ 12.696632] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8c2a5d8949d8 [ 12.699491] R13: ffffffff95ede400 R14: 0000000000000000 R15: ffff8c2a5d894800 [ 12.702338] FS: 0000000000000000(0000) GS:ffff8c2a7fc80000(0000) knlGS:0000000000000000 [ 12.705099] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 12.706776] CR2: 0000000001bb9440 CR3: 00000000bd009001 CR4: 00000000003606e0 [ 12.708847] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 12.711016] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 12.712627] Call Trace: [ 12.713390] <IRQ> [ 12.714011] tipc_node_check_dest+0x2e8/0x350 [tipc] [ 12.715286] tipc_disc_rcv+0x14d/0x1d0 [tipc] [ 12.716370] tipc_rcv+0x8b0/0xd40 [tipc] [ 12.717396] ? minmax_running_min+0x2f/0x60 [ 12.718248] ? dst_alloc+0x4c/0xa0 [ 12.718964] ? tcp_ack+0xaf1/0x10b0 [ 12.719658] ? tipc_udp_is_known_peer+0xa0/0xa0 [tipc] [ 12.720634] tipc_udp_recv+0x71/0x1d0 [tipc] [ 12.721459] ? dst_alloc+0x4c/0xa0 [ 12.722130] udp_queue_rcv_skb+0x264/0x490 [ 12.722924] __udp4_lib_rcv+0x21e/0x990 [ 12.723670] ? ip_route_input_rcu+0x2dd/0xbf0 [ 12.724442] ? tcp_v4_rcv+0x958/0xa40 [ 12.725039] udp_rcv+0x1a/0x20 [ 12.725587] ip_local_deliver_finish+0x97/0x1d0 [ 12.726323] ip_local_deliver+0xaf/0xc0 [ 12.726959] ? ip_route_input_noref+0x19/0x20 [ 12.727689] ip_rcv_finish+0xdd/0x3b0 [ 12.728307] ip_rcv+0x2ac/0x360 [ 12.728839] __netif_receive_skb_core+0x6fb/0xa90 [ 12.729580] ? udp4_gro_receive+0x1a7/0x2c0 [ 12.730274] __netif_receive_skb+0x1d/0x60 [ 12.730953] ? __netif_receive_skb+0x1d/0x60 [ 12.731637] netif_receive_skb_internal+0x37/0xd0 [ 12.732371] napi_gro_receive+0xc7/0xf0 [ 12.732920] receive_buf+0x3c3/0xd40 [ 12.733441] virtnet_poll+0xb1/0x250 [ 12.733944] net_rx_action+0x23e/0x370 [ 12.734476] __do_softirq+0xc5/0x2f8 [ 12.734922] irq_exit+0xfa/0x100 [ 12.735315] do_IRQ+0x4f/0xd0 [ 12.735680] common_interrupt+0xa2/0xa2 [ 12.736126] </IRQ> [ 12.736416] RIP: 0010:native_safe_halt+0x6/0x10 [ 12.736925] RSP: 0018:ffffa41cc0cafe90 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff4d [ 12.737756] RAX: 0000000000000000 RBX: ffff8c2a761edb80 RCX: 0000000000000000 [ 12.738504] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 12.739258] RBP: ffffa41cc0cafe90 R08: 0000014b5b9795e5 R09: ffffa41cc12c7e88 [ 12.740118] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000002 [ 12.740964] R13: ffff8c2a761edb80 R14: 0000000000000000 R15: 0000000000000000 [ 12.741831] default_idle+0x2a/0x100 [ 12.742323] arch_cpu_idle+0xf/0x20 [ 12.742796] default_idle_call+0x28/0x40 [ 12.743312] do_idle+0x179/0x1f0 [ 12.743761] cpu_startup_entry+0x1d/0x20 [ 12.744291] start_secondary+0x112/0x120 [ 12.744816] secondary_startup_64+0xa5/0xa5 [ 12.745367] Code: b9 f4 01 00 00 48 89 c2 48 c1 ea 02 48 3d d3 07 00 00 48 0f 47 d1 49 8b 0c 24 48 39 d1 76 07 49 89 14 24 48 89 d1 31 d2 48 89 df <48> f7 f1 89 c6 e8 81 6e ff ff 5b 41 5c 5d c3 66 90 66 2e 0f 1f [ 12.747527] RIP: tipc_node_calculate_timer.isra.12+0x45/0x60 [tipc] RSP: ffff8c2a7fc838a0 [ 12.748555] ---[ end trace 1399ab83390650fd ]--- [ 12.749296] Kernel panic - not syncing: Fatal exception in interrupt [ 12.750123] Kernel Offset: 0x13200000 from 0xffffffff82000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 12.751215] Rebooting in 60 seconds.. Fixes: c9b64d492b1f ("tipc: add replicast peer discovery") Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-01tcp/dccp: block bh before arming time_wait timerEric Dumazet2-0/+12
Maciej Żenczykowski reported some panics in tcp_twsk_destructor() that might be caused by the following bug. timewait timer is pinned to the cpu, because we want to transition timwewait refcount from 0 to 4 in one go, once everything has been initialized. At the time commit ed2e92394589 ("tcp/dccp: fix timewait races in timer handling") was merged, TCP was always running from BH habdler. After commit 5413d1babe8f ("net: do not block BH while processing socket backlog") we definitely can run tcp_time_wait() from process context. We need to block BH in the critical section so that the pinned timer has still its purpose. This bug is more likely to happen under stress and when very small RTO are used in datacenter flows. Fixes: 5413d1babe8f ("net: do not block BH while processing socket backlog") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Maciej Żenczykowski <maze@google.com> Acked-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-01sctp: do not abandon the other frags in unsent outq if one msg has outstanding fragsXin Long2-1/+6
Now for the abandoned chunks in unsent outq, it would just free the chunks. Because no tsn is assigned to them yet, there's no need to send fwd tsn to peer, unlike for the abandoned chunks in sent outq. The problem is when parts of the msg have been sent and the other frags are still in unsent outq, if they are abandoned/dropped, the peer would never get this msg reassembled. So these frags in unsent outq can't be dropped if this msg already has outstanding frags. This patch does the check in sctp_chunk_abandoned and sctp_prsctp_prune_unsent. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-01sctp: abandon the whole msg if one part of a fragmented message is abandonedXin Long2-4/+15
As rfc3758#section-3.1 demands: A3) When a TSN is "abandoned", if it is part of a fragmented message, all other TSN's within that fragmented message MUST be abandoned at the same time. Besides, if it couldn't handle this, the rest frags would never get assembled in peer side. This patch supports it by adding abandoned flag in sctp_datamsg, when one chunk is being abandoned, set chunk->msg->abandoned as well. Next time when checking for abandoned, go checking chunk->msg->abandoned first. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-01sctp: only update outstanding_bytes for transmitted queue when doing prsctp_pruneXin Long1-2/+4
Now outstanding_bytes is only increased when appending chunks into one packet and sending it at 1st time, while decreased when it is about to move into retransmit queue. It means outstanding_bytes value is already decreased for all chunks in retransmit queue. However sctp_prsctp_prune_sent is a common function to check the chunks in both transmitted and retransmit queue, it decrease outstanding_bytes when moving a chunk into abandoned queue from either of them. It could cause outstanding_bytes underflow, as it also decreases it's value for the chunks in retransmit queue. This patch fixes it by only updating outstanding_bytes for transmitted queue when pruning queues for prsctp prio policy, the same fix is also needed in sctp_check_transmitted. Fixes: 8dbdf1f5b09c ("sctp: implement prsctp PRIO policy") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-30SUNRPC: Handle ENETDOWN errorsTrond Myklebust2-0/+6
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-11-30net/reuseport: drop legacy codePaolo Abeni5-55/+15
Since commit e32ea7e74727 ("soreuseport: fast reuseport UDP socket selection") and commit c125e80b8868 ("soreuseport: fast reuseport TCP socket selection") the relevant reuseport socket matching the current packet is selected by the reuseport_select_sock() call. The only exceptions are invalid BPF filters/filters returning out-of-range indices. In the latter case the code implicitly falls back to using the hash demultiplexing, but instead of selecting the socket inside the reuseport_select_sock() function, it relies on the hash selection logic introduced with the early soreuseport implementation. With this patch, in case of a BPF filter returning a bad socket index value, we fall back to hash-based selection inside the reuseport_select_sock() body, so that we can drop some duplicate code in the ipv4 and ipv6 stack. This also allows faster lookup in the above scenario and will allow us to avoid computing the hash value for successful, BPF based demultiplexing - in a later patch. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-30sit: update frag_off infoHangbin Liu1-0/+1
After parsing the sit netlink change info, we forget to update frag_off in ipip6_tunnel_update(). Fix it by assigning frag_off with new value. Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-30tcp: remove buggy call to tcp_v6_restore_cb()Eric Dumazet1-1/+0
tcp_v6_send_reset() expects to receive an skb with skb->cb[] layout as used in TCP stack. MD5 lookup uses tcp_v6_iif() and tcp_v6_sdif() and thus TCP_SKB_CB(skb)->header.h6 This patch probably fixes RST packets sent on behalf of a timewait md5 ipv6 socket. Before Florian patch, tcp_v6_restore_cb() was needed before jumping to no_tcp_socket label. Fixes: 271c3b9b7bda ("tcp: honour SO_BINDTODEVICE for TW_RST case too") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-30act_sample: get rid of tcf_sample_cleanup_rcu()Cong Wang1-11/+3
Similar to commit d7fb60b9cafb ("net_sched: get rid of tcfa_rcu"), TC actions don't need to respect RCU grace period, because it is either just detached from tc filter (standalone case) or it is removed together with tc filter (bound case) in which case RCU grace period is already respected at filter layer. Fixes: 5c5670fae430 ("net/sched: Introduce sample tc action") Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Cc: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-30Merge tag 'rxrpc-fixes-20171129' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fsDavid S. Miller5-27/+35
David Howells says: ==================== rxrpc: Fixes Here are three patches for AF_RXRPC. One removes some whitespace, one fixes terminal ACK generation and the third makes a couple of places actually use the timeout value just determined rather than ignoring it. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-30net: Remove dst->nextDavid Miller1-1/+0
There are no more users. Signed-off-by: David S. Miller <davem@davemloft.net> Reviewed-by: Eric Dumazet <edumazet@google.com>
2017-11-30xfrm: Stop using dst->next in bundle construction.David Miller1-24/+32
While building ipsec bundles, blocks of xfrm dsts are linked together using dst->next from bottom to the top. The only thing this is used for is initializing the pmtu values of the xfrm stack, and for updating the mtu values at xfrm_bundle_ok() time. The bundle pmtu entries must be processed in this order so that pmtu values lower in the stack of routes can propagate up to the higher ones. Avoid using dst->next by simply maintaining an array of dst pointers as we already do for the xfrm_state objects when building the bundle. Signed-off-by: David S. Miller <davem@davemloft.net> Reviewed-by: Eric Dumazet <edumazet@google.com>
2017-11-30xfrm: Move dst->path into struct xfrm_dstDavid Miller7-26/+18
The first member of an IPSEC route bundle chain sets it's dst->path to the underlying ipv4/ipv6 route that carries the bundle. Stated another way, if one were to follow the xfrm_dst->child chain of the bundle, the final non-NULL pointer would be the path and point to either an ipv4 or an ipv6 route. This is largely used to make sure that PMTU events propagate down to the correct ipv4 or ipv6 route. When we don't have the top of an IPSEC bundle 'dst->path == dst'. Move it down into xfrm_dst and key off of dst->xfrm. Signed-off-by: David S. Miller <davem@davemloft.net> Reviewed-by: Eric Dumazet <edumazet@google.com>
2017-11-30ipv6: Move dst->from into struct rt6_info.David Miller2-18/+17
The dst->from value is only used by ipv6 routes to track where a route "came from". Any time we clone or copy a core ipv6 route in the ipv6 routing tables, we have the copy/clone's ->from point to the base route. This is used to handle route expiration properly. Only ipv6 uses this mechanism, and only ipv6 code references it. So it is safe to move it into rt6_info. Signed-off-by: David S. Miller <davem@davemloft.net> Reviewed-by: Eric Dumazet <edumazet@google.com>
2017-11-30xfrm: Move child route linkage into xfrm_dst.David Miller4-11/+15
XFRM bundle child chains look like this: xdst1 --> xdst2 --> xdst3 --> path_dst All of xdstN are xfrm_dst objects and xdst->u.dst.xfrm is non-NULL. The final child pointer in the chain, here called 'path_dst', is some other kind of route such as an ipv4 or ipv6 one. The xfrm output path pops routes, one at a time, via the child pointer, until we hit one which has a dst->xfrm pointer which is NULL. We can easily preserve the above mechanisms with child sitting only in the xfrm_dst structure. All children in the chain before we break out of the xfrm_output() loop have dst->xfrm non-NULL and are therefore xfrm_dst objects. Since we break out of the loop when we find dst->xfrm NULL, we will not try to dereference 'dst' as if it were an xfrm_dst. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-30ipsec: Create and use new helpers for dst child access.David Miller1-24/+23
This will make a future change moving the dst->child pointer less invasive. Signed-off-by: David S. Miller <davem@davemloft.net> Reviewed-by: Eric Dumazet <edumazet@google.com>
2017-11-30net: Create and use new helper xfrm_dst_child().David Miller6-14/+16
Only IPSEC routes have a non-NULL dst->child pointer. And IPSEC routes are identified by a non-NULL dst->xfrm pointer. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-30ipv6: Move rt6_next from dst_entry into ipv6 route structure.David Miller2-18/+18
Signed-off-by: David S. Miller <davem@davemloft.net> Reviewed-by: Eric Dumazet <edumazet@google.com>
2017-11-30decnet: Move dn_next into decnet route structure.David Miller1-16/+18
Signed-off-by: David S. Miller <davem@davemloft.net> Reviewed-by: Eric Dumazet <edumazet@google.com>
2017-11-30atm: mpoa: remove 32-bit timekeepingTina Ruchandani5-40/+43
net/atm/mpoa_* files use 'struct timeval' to store event timestamps. struct timeval uses a 32-bit seconds field which will overflow in the year 2038 and beyond. Morever, the timestamps are being compared only to get seconds elapsed, so struct timeval which stores a seconds and microseconds field is an overkill. This patch replaces the use of struct timeval with time64_t to store a 64-bit seconds field. Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-30openvswitch: use ktime_get_ts64() instead of ktime_get_ts()Arnd Bergmann1-3/+3
timespec is deprecated because of the y2038 overflow, so let's convert this one to ktime_get_ts64(). The code is already safe even on 32-bit architectures, since it uses monotonic times. On 64-bit architectures, nothing changes, while on 32-bit architectures this avoids one type conversion. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-29Merge tag 'nfsd-4.15-1' of git://linux-nfs.org/~bfields/linuxLinus Torvalds3-5/+5
Pull nfsd fixes from Bruce Fields: "I screwed up my merge window pull request; I only sent half of what I meant to. There were no new features, just bugfixes of various importance and some very minor cleanup, so I think it's all still appropriate for -rc2. Highlights: - Fixes from Trond for some races in the NFSv4 state code. - Fix from Naofumi Honda for a typo in the blocked lock notificiation code - Fixes from Vasily Averin for some problems starting and stopping lockd especially in network namespaces" * tag 'nfsd-4.15-1' of git://linux-nfs.org/~bfields/linux: (23 commits) lockd: fix "list_add double add" caused by legacy signal interface nlm_shutdown_hosts_net() cleanup race of nfsd inetaddr notifiers vs nn->nfsd_serv change race of lockd inetaddr notifiers vs nlmsvc_rqst change SUNRPC: make cache_detail structures const NFSD: make cache_detail structures const sunrpc: make the function arg as const nfsd: check for use of the closed special stateid nfsd: fix panic in posix_unblock_lock called from nfs4_laundromat lockd: lost rollback of set_grace_period() in lockd_down_net() lockd: added cleanup checks in exit_net hook grace: replace BUG_ON by WARN_ONCE in exit_net hook nfsd: fix locking validator warning on nfs4_ol_stateid->st_mutex class lockd: remove net pointer from messages nfsd: remove net pointer from debug messages nfsd: Fix races with check_stateid_generation() nfsd: Ensure we check stateid validity in the seqid operation checks nfsd: Fix race in lock stateid creation nfsd4: move find_lock_stateid nfsd: Ensure we don't recognise lock stateids after freeing them ...
2017-11-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds37-402/+917
Pull networking fixes from David Miller: 1) The forcedeth conversion from pci_*() DMA interfaces to dma_*() ones missed one spot. From Zhu Yanjun. 2) Missing CRYPTO_SHA256 Kconfig dep in cfg80211, from Johannes Berg. 3) Fix checksum offloading in thunderx driver, from Sunil Goutham. 4) Add SPDX to vm_sockets_diag.h, from Stephen Hemminger. 5) Fix use after free of packet headers in TIPC, from Jon Maloy. 6) "sizeof(ptr)" vs "sizeof(*ptr)" bug in i40e, from Gustavo A R Silva. 7) Tunneling fixes in mlxsw driver, from Petr Machata. 8) Fix crash in fanout_demux_rollover() of AF_PACKET, from Mike Maloney. 9) Fix race in AF_PACKET bind() vs. NETDEV_UP notifier, from Eric Dumazet. 10) Fix regression in sch_sfq.c due to one of the timer_setup() conversions. From Paolo Abeni. 11) SCTP does list_for_each_entry() using wrong struct member, fix from Xin Long. 12) Don't use big endian netlink attribute read for IFLA_BOND_AD_ACTOR_SYSTEM, it is in cpu endianness. Also from Xin Long. 13) Fix mis-initialization of q->link.clock in CBQ scheduler, preventing adding filters there. From Jiri Pirko. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (67 commits) ethernet: dwmac-stm32: Fix copyright net: via: via-rhine: use %p to format void * address instead of %x net: ethernet: xilinx: Mark XILINX_LL_TEMAC broken on 64-bit myri10ge: Update MAINTAINERS net: sched: cbq: create block for q->link.block atm: suni: remove extraneous space to fix indentation atm: lanai: use %p to format kernel addresses instead of %x VSOCK: Don't set sk_state to TCP_CLOSE before testing it atm: fore200e: use %pK to format kernel addresses instead of %x ambassador: fix incorrect indentation of assignment statement vxlan: use __be32 type for the param vni in __vxlan_fdb_delete bonding: use nla_get_u64 to extract the value for IFLA_BOND_AD_ACTOR_SYSTEM sctp: use right member as the param of list_for_each_entry sch_sfq: fix null pointer dereference at timer expiration cls_bpf: don't decrement net's refcount when offload fails net/packet: fix a race in packet_bind() and packet_notifier() packet: fix crash in fanout_demux_rollover() sctp: remove extern from stream sched sctp: force the params with right types for sctp csum apis sctp: force SCTP_ERROR_INV_STRM with __u32 when calling sctp_chunk_fail ...
2017-11-29SUNRPC: Allow connect to return EHOSTUNREACHTrond Myklebust1-0/+1
Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-11-29rxrpc: Fix variable overwriteGustavo A. R. Silva2-2/+2
Values assigned to both variable resend_at and ack_at are overwritten before they can be used. The correct fix here is to add 'now' to the previously computed value in resend_at and ack_at. Addresses-Coverity-ID: 1462262 Addresses-Coverity-ID: 1462263 Addresses-Coverity-ID: 1462264 Fixes: beb8e5e4f38c ("rxrpc: Express protocol timeouts in terms of RTT") Link: https://marc.info/?i=17004.1511808959%40warthog.procyon.org.uk Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-29rxrpc: Fix ACK generation from the connection event processorDavid Howells1-21/+29
Repeat terminal ACKs and now terminal ACKs are now generated from the connection event processor rather from call handling as this allows us to discard client call structures as soon as possible and free up the channel for a follow on call. However, in ACKs so generated, the additional information trailer is malformed because the padding that's meant to be in the middle isn't included in what's transmitted. Fix it so that the 3 bytes of padding are included in the transmission. Further, the trailer is misaligned because of the padding, so assigment to the u16 and u32 fields inside it might cause problems on some arches, so fix this by breaking the padding and the trailer out of the packed struct. (This also deals with potential compiler weirdies where some of the nested structs are packed and some aren't). The symptoms can be seen in wireshark as terminal DUPLICATE or IDLE ACK packets in which the Max MTU, Interface MTU and rwind fields have weird values and the Max Packets field is apparently missing. Reported-by: Jeffrey Altman <jaltman@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-29rxrpc: Clean up whitespaceDavid Howells3-4/+4
Clean up some whitespace from rxrpc. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-28net: sched: cbq: create block for q->link.blockJiri Pirko1-1/+8
q->link.block is not initialized, that leads to EINVAL when one tries to add filter there. So initialize it properly. This can be reproduced by: $ tc qdisc add dev eth0 root handle 1: cbq avpkt 1000 rate 1000Mbit bandwidth 1000Mbit $ tc filter add dev eth0 parent 1: protocol ip prio 100 u32 match ip protocol 0 0x00 flowid 1:1 Reported-by: Jaroslav Aster <jaster@redhat.com> Reported-by: Ivan Vecera <ivecera@redhat.com> Fixes: 6529eaba33f0 ("net: sched: introduce tcf block infractructure") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Eelco Chaudron <echaudro@redhat.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-28VSOCK: Don't set sk_state to TCP_CLOSE before testing itJorgen Hansen1-2/+2
A recent commit (3b4477d2dcf2) converted the sk_state to use TCP constants. In that change, vmci_transport_handle_detach was changed such that sk->sk_state was set to TCP_CLOSE before we test whether it is TCP_SYN_SENT. This change moves the sk_state change back to the original locations in that function. Signed-off-by: Jorgen Hansen <jhansen@vmware.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-28sctp: use right member as the param of list_for_each_entryXin Long1-3/+3
Commit d04adf1b3551 ("sctp: reset owner sk for data chunks on out queues when migrating a sock") made a mistake that using 'list' as the param of list_for_each_entry to traverse the retransmit, sacked and abandoned queues, while chunks are using 'transmitted_list' to link into these queues. It could cause NULL dereference panic if there are chunks in any of these queues when peeling off one asoc. So use the chunk member 'transmitted_list' instead in this patch. Fixes: d04adf1b3551 ("sctp: reset owner sk for data chunks on out queues when migrating a sock") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-28sch_sfq: fix null pointer dereference at timer expirationPaolo Abeni1-0/+1
While converting sch_sfq to use timer_setup(), the commit cdeabbb88134 ("net: sched: Convert timers to use timer_setup()") forgot to initialize the 'sch' field. As a result, the timer callback tries to dereference a NULL pointer, and the kernel does oops. Fix it initializing such field at qdisc creation time. Fixes: cdeabbb88134 ("net: sched: Convert timers to use timer_setup()") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-28cls_bpf: don't decrement net's refcount when offload failsJakub Kicinski1-10/+13
When cls_bpf offload was added it seemed like a good idea to call cls_bpf_delete_prog() instead of extending the error handling path, since the software state is fully initialized at that point. This handling of errors without jumping to the end of the function is error prone, as proven by later commit missing that extra call to __cls_bpf_delete_prog(). __cls_bpf_delete_prog() is now expected to be invoked with a reference on exts->net or the field zeroed out. The call on the offload's error patch does not fullfil this requirement, leading to each error stealing a reference on net namespace. Create a function undoing what cls_bpf_set_parms() did and use it from __cls_bpf_delete_prog() and the error path. Fixes: aae2c35ec892 ("cls_bpf: use tcf_exts_get_net() before call_rcu()") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-28net/packet: fix a race in packet_bind() and packet_notifier()Eric Dumazet1-0/+5
syzbot reported crashes [1] and provided a C repro easing bug hunting. When/if packet_do_bind() calls __unregister_prot_hook() and releases po->bind_lock, another thread can run packet_notifier() and process an NETDEV_UP event. This calls register_prot_hook() and hooks again the socket right before first thread is able to grab again po->bind_lock. Fixes this issue by temporarily setting po->num to 0, as suggested by David Miller. [1] dev_remove_pack: ffff8801bf16fa80 not found ------------[ cut here ]------------ kernel BUG at net/core/dev.c:7945! ( BUG_ON(!list_empty(&dev->ptype_all)); ) invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: device syz0 entered promiscuous mode CPU: 0 PID: 3161 Comm: syzkaller404108 Not tainted 4.14.0+ #190 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff8801cc57a500 task.stack: ffff8801cc588000 RIP: 0010:netdev_run_todo+0x772/0xae0 net/core/dev.c:7945 RSP: 0018:ffff8801cc58f598 EFLAGS: 00010293 RAX: ffff8801cc57a500 RBX: dffffc0000000000 RCX: ffffffff841f75b2 RDX: 0000000000000000 RSI: 1ffff100398b1ede RDI: ffff8801bf1f8810 device syz0 entered promiscuous mode RBP: ffff8801cc58f898 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801bf1f8cd8 R13: ffff8801cc58f870 R14: ffff8801bf1f8780 R15: ffff8801cc58f7f0 FS: 0000000001716880(0000) GS:ffff8801db400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020b13000 CR3: 0000000005e25000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: rtnl_unlock+0xe/0x10 net/core/rtnetlink.c:106 tun_detach drivers/net/tun.c:670 [inline] tun_chr_close+0x49/0x60 drivers/net/tun.c:2845 __fput+0x333/0x7f0 fs/file_table.c:210 ____fput+0x15/0x20 fs/file_table.c:244 task_work_run+0x199/0x270 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x9bb/0x1ae0 kernel/exit.c:865 do_group_exit+0x149/0x400 kernel/exit.c:968 SYSC_exit_group kernel/exit.c:979 [inline] SyS_exit_group+0x1d/0x20 kernel/exit.c:977 entry_SYSCALL_64_fastpath+0x1f/0x96 RIP: 0033:0x44ad19 Fixes: 30f7ea1c2b5f ("packet: race condition in packet_bind") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Francesco Ruggeri <fruggeri@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-28packet: fix crash in fanout_demux_rollover()Mike Maloney2-23/+10
syzkaller found a race condition fanout_demux_rollover() while removing a packet socket from a fanout group. po->rollover is read and operated on during packet_rcv_fanout(), via fanout_demux_rollover(), but the pointer is currently cleared before the synchronization in packet_release(). It is safer to delay the cleanup until after synchronize_net() has been called, ensuring all calls to packet_rcv_fanout() for this socket have finished. To further simplify synchronization around the rollover structure, set po->rollover in fanout_add() only if there are no errors. This removes the need for rcu in the struct and in the call to packet_getsockopt(..., PACKET_ROLLOVER_STATS, ...). Crashing stack trace: fanout_demux_rollover+0xb6/0x4d0 net/packet/af_packet.c:1392 packet_rcv_fanout+0x649/0x7c8 net/packet/af_packet.c:1487 dev_queue_xmit_nit+0x835/0xc10 net/core/dev.c:1953 xmit_one net/core/dev.c:2975 [inline] dev_hard_start_xmit+0x16b/0xac0 net/core/dev.c:2995 __dev_queue_xmit+0x17a4/0x2050 net/core/dev.c:3476 dev_queue_xmit+0x17/0x20 net/core/dev.c:3509 neigh_connected_output+0x489/0x720 net/core/neighbour.c:1379 neigh_output include/net/neighbour.h:482 [inline] ip6_finish_output2+0xad1/0x22a0 net/ipv6/ip6_output.c:120 ip6_finish_output+0x2f9/0x920 net/ipv6/ip6_output.c:146 NF_HOOK_COND include/linux/netfilter.h:239 [inline] ip6_output+0x1f4/0x850 net/ipv6/ip6_output.c:163 dst_output include/net/dst.h:459 [inline] NF_HOOK.constprop.35+0xff/0x630 include/linux/netfilter.h:250 mld_sendpack+0x6a8/0xcc0 net/ipv6/mcast.c:1660 mld_send_initial_cr.part.24+0x103/0x150 net/ipv6/mcast.c:2072 mld_send_initial_cr net/ipv6/mcast.c:2056 [inline] ipv6_mc_dad_complete+0x99/0x130 net/ipv6/mcast.c:2079 addrconf_dad_completed+0x595/0x970 net/ipv6/addrconf.c:4039 addrconf_dad_work+0xac9/0x1160 net/ipv6/addrconf.c:3971 process_one_work+0xbf0/0x1bc0 kernel/workqueue.c:2113 worker_thread+0x223/0x1990 kernel/workqueue.c:2247 kthread+0x35e/0x430 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:432 Fixes: 0648ab70afe6 ("packet: rollover prepare: per-socket state") Fixes: 509c7a1ecc860 ("packet: avoid panic in packet_getsockopt()") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Mike Maloney <maloney@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-28sctp: remove extern from stream schedXin Long4-9/+31
Now each stream sched ops is defined in different .c file and added into the global ops in another .c file, it uses extern to make this work. However extern is not good coding style to get them in and even make C=2 reports errors for this. This patch adds sctp_sched_ops_xxx_init for each stream sched ops in their .c file, then get them into the global ops by calling them when initializing sctp module. Fixes: 637784ade221 ("sctp: introduce priority based stream scheduler") Fixes: ac1ed8b82cd6 ("sctp: introduce round robin stream scheduler") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-28sctp: force SCTP_ERROR_INV_STRM with __u32 when calling sctp_chunk_failXin Long1-1/+1
This patch is to force SCTP_ERROR_INV_STRM with right type to fit in sctp_chunk_fail to avoid the sparse error. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-27SUNRPC: make cache_detail structures constBhumika Goyal2-4/+4
Make these const as they are only getting passed to the function cache_create_net having the argument as const. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2017-11-27sunrpc: make the function arg as constBhumika Goyal1-1/+1
Make the struct cache_detail *tmpl argument of the function cache_create_net as const as it is only getting passed to kmemup having the argument as const void *. Add const to the prototype too. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2017-11-27tipc: eliminate access after delete in group_filter_msg()Jon Maloy1-1/+1
KASAN revealed another access after delete in group.c. This time it found that we read the header of a received message after the buffer has been released. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-28Merge tag 'mac80211-for-davem-2017-11-27' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211David S. Miller5-10/+47
Johannes Berg says: ==================== Four fixes: * CRYPTO_SHA256 is needed for regdb validation * mac80211: mesh path metric was wrong in some frames * mac80211: use QoS null-data packets on QoS connections * mac80211: tear down RX aggregation sessions first to drop fewer packets in HW restart scenarios ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-28sctp: set sender next_tsn for the old result with ctsn_ack_point plus 1Xin Long1-1/+1
When doing asoc reset, if the sender of the response has already sent some chunk and increased asoc->next_tsn before the duplicate request comes, the response will use the old result with an incorrect sender next_tsn. Better than asoc->next_tsn, asoc->ctsn_ack_point can't be changed after the sender of the response has performed the asoc reset and before the peer has confirmed it, and it's value is still asoc->next_tsn original value minus 1. This patch sets sender next_tsn for the old result with ctsn_ack_point plus 1 when processing the duplicate request, to make sure the sender next_tsn value peer gets will be always right. Fixes: 692787cef651 ("sctp: implement receiver-side procedures for the SSN/TSN Reset Request Parameter") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-28sctp: avoid flushing unsent queue when doing asoc resetXin Long1-7/+14
Now when doing asoc reset, it cleans up sacked and abandoned queues by calling sctp_outq_free where it also cleans up unsent, retransmit and transmitted queues. It's safe for the sender of response, as these 3 queues are empty at that time. But when the receiver of response is doing the reset, the users may already enqueue some chunks into unsent during the time waiting the response, and these chunks should not be flushed. To void the chunks in it would be removed, it moves the queue into a temp list, then gets it back after sctp_outq_free is done. The patch also fixes some incorrect comments in sctp_process_strreset_tsnreq. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-28sctp: only allow the asoc reset when the asoc outq is emptyXin Long1-0/+9
As it says in rfc6525#section5.1.4, before sending the request, C2: The sender has either no outstanding TSNs or considers all outstanding TSNs abandoned. Prior to this patch, it tried to consider all outstanding TSNs abandoned by dropping all chunks in all outqs with sctp_outq_free (even including sacked, retransmit and transmitted queues) when doing this reset, which is too aggressive. To make it work gently, this patch will only allow the asoc reset when the sender has no outstanding TSNs by checking if unsent, transmitted and retransmit are all empty with sctp_outq_is_empty before sending and processing the request. Fixes: 692787cef651 ("sctp: implement receiver-side procedures for the SSN/TSN Reset Request Parameter") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-28sctp: only allow the out stream reset when the stream outq is emptyXin Long1-0/+35
Now the out stream reset in sctp stream reconf could be done even if the stream outq is not empty. It means that users can not be sure since which msg the new ssn will be used. To make this more synchronous, it shouldn't allow to do out stream reset until these chunks in unsent outq all are sent out. This patch checks the corresponding stream outqs when sending and processing the request . If any of them has unsent chunks in outq, it will return -EAGAIN instead or send SCTP_STRRESET_IN_PROGRESS back to the sender. Fixes: 7f9d68ac944e ("sctp: implement sender-side procedures for SSN Reset Request Parameter") Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-28sctp: use sizeof(__u16) for each stream number length instead of magic numberXin Long1-4/+6
Now in stream reconf part there are still some places using magic number 2 for each stream number length. To make it more readable, this patch is to replace them with sizeof(__u16). Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-27mac80211: tear down RX aggregations firstSara Sharon1-1/+3
When doing HW restart we tear down aggregations. Since at this point we are not TX'ing any aggregation, while the peer is still sending RX aggregation over the air, it will make sense to tear down the RX aggregations first. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.