aboutsummaryrefslogtreecommitdiffstats
path: root/net (follow)
AgeCommit message (Collapse)AuthorFilesLines
2011-03-09ipv4: Lookup multicast routes by rtable using helper.David S. Miller1-42/+28
Create a common helper for this operation, since we do it identically in three spots. Suggested by Eric Dumazet. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-09Phonet: kill the ST-Ericsson pipe controller KconfigRémi Denis-Courmont2-37/+0
This is now a run-time choice so that a single kernel can support both old and new generation ISI modems. Support for manually enabling the pipe flow is removed as it did not work properly, does not fit well with the socket API, and I am not aware of any use at the moment. Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-09Phonet: support active connection without pipe controller on modemRémi Denis-Courmont2-133/+141
This provides support for newer ISI modems with no need for the earlier experimental compile-time alternative choice. With this, we can now use the same kernel and userspace with both types of modems. This also avoids confusing two different and incompatible state machines, actively connected vs accepted sockets, and adds connection response error handling (processing "SYN/RST" of sorts). Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-09Phonet: provide pipe socket option to retrieve the pipe identifierRémi Denis-Courmont1-8/+7
User-space sometimes needs this information. In particular, the GPRS context or the AT commands pipe setups may use the pipe handle as a reference. This removes the settable pipe handle with CONFIG_PHONET_PIPECTRLR. It did not handle error cases correctly. Furthermore, the kernel *could* implement a smart scheme for allocating handles (if ever needed), but userspace really cannot. Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-09Phonet: allocate sock from accept syscall rather than soft IRQRémi Denis-Courmont2-173/+121
This moves most of the accept logic to process context like other socket stacks do. Then we can use a few more common socket helpers and simplify a bit. Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-09Phonet: factor common code to send control messagesRémi Denis-Courmont1-152/+73
With the addition of the pipe controller, there is now quite a bit of repetitive code for small signaling messages. Lets factor it. Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-09Phonet: correct pipe backlog callback return valuesRémi Denis-Courmont1-14/+11
In some cases, the Phonet pipe backlog callbacks returned negative errno instead of NET_RX_* values. In other cases, NET_RX_DROP was returned for invalid packets, even though it seems only intended for buffering problems (not for deliberately discarded packets). Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-09Phonet: return an error when packet TX failsRémi Denis-Courmont1-5/+3
Phonet assumes that packets are never dropped. We try our best to avoid this situation. But lets return ENOBUFS if queueing to the network device fails so that the caller knows things went wrong. Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-09Phonet: fix NULL dereference on TX path with implicit sourceRémi Denis-Courmont1-3/+2
The previous Phonet patch series introduced per-socket implicit destination (i.e. connect()). In that case, the destination socket address is NULL in the transmit function. However commit a8059512b120362b15424f152b2548fe8b11bd0c ("Phonet: implement per-socket destination/peer address") is incomplete and would trigger a NULL dereference. (Fortunately, the code is not in released kernel, and in fact currently not reachable.) Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-08inetpeer: Don't disable BH for initial fast RCU lookup.David S. Miller1-9/+9
If modifications on other cpus are ok, then modifications to the tree during lookup done by the local cpu are ok too. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-08dsa/mv88e6060: support nonzero mii base addressPeter Korsgaard1-3/+4
The mv88e6060 uses either the lower 16 or upper 16 mii addresses, depending on the value of the EE_CLK/ADDR4 pin. Support both configurations by using the sw_addr setting as base address. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-08Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/net-next-2.6David S. Miller1-0/+14
2011-03-08ipv4: Fix scope value used in route src-address caching.David S. Miller1-2/+3
We have to use cfg->fc_scope not the final nh_scope value. Reported-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07ipv4: Cache source address in nexthop entries.David S. Miller2-7/+26
When doing output route lookups, we have to select the source address if the user has not specified an explicit one. First, if the route has an explicit preferred source address specified, then we use that. Otherwise we search the route's outgoing interface for a suitable address. This search can be precomputed and cached at route insertion time. The only missing part is that we have to refresh this precomputed value any time addresses are added or removed from the interface, and this is accomplished by fib_update_nh_saddrs(). Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07vlan: add support to ndo_fcoe_ddp_target()Yi Zou1-0/+14
Add the new target ddp offload support ndo_fcoe_ddp_target(). Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-07af_unix: remove unused struct sockaddr_un cruftHagen Paul Pfeifer1-2/+0
Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07sctp: several declared/set but unused fixesHagen Paul Pfeifer6-18/+1
Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07af_packet: struct socket declared/assigned but unusedHagen Paul Pfeifer1-3/+0
Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07mcast: net_device dev not usedHagen Paul Pfeifer1-6/+0
ip6_mc_source(), ip6_mc_msfilter() as well as ip6_mc_msfget() declare and assign dev but do not use the variable afterwards. Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07net: allow handlers to be processed for orig_devJiri Pirko1-1/+2
This was there before, I forgot about this. Allows deliveries to ptype_base handlers registered for orig_dev. I presume this is still desired. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07ipv4: Inline fib_semantic_match into check_leafDavid S. Miller3-75/+51
This elimiates a lot of pure overhead due to parameter passing. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07ipv4: Validate route entry type at insert instead of every lookup.David S. Miller1-26/+28
fib_semantic_match() requires that if the type doesn't signal an automatic error, it must be of type RTN_UNICAST, RTN_LOCAL, RTN_BROADCAST, RTN_ANYCAST, or RTN_MULTICAST. Checking this every route lookup is pointless work. Instead validate it during route insertion, via fib_create_info(). Also, there was nothing making sure the type value was less than RTN_MAX, so add that missing check while we're here. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07Merge branch 'batman-adv/next' of git://git.open-mesh.org/ecsv/linux-mergeDavid S. Miller24-1232/+1634
2011-03-05batman-adv: Disallow regular interface as mesh deviceSven Eckelmann3-12/+36
When trying to associate a net_device with another net_device which already exists, batman-adv assumes that this interface is a fully initialized batman mesh interface without checking it. The behaviour when accessing data behind netdev_priv of a random net_device is undefined and potentially dangerous. Reported-by: Linus Lüssing <linus.luessing@ascom.ch> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-03-05batman-adv: Remove unused hdr_size variable in route_unicast_packet()Linus Lüssing3-7/+5
Signed-off-by: Linus Lüssing <linus.luessing@ascom.ch> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-03-05batman-adv: rename batman_if struct to hard_ifaceMarek Lindner18-330/+335
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-03-05batman-adv: rename global if_list to hardif_listMarek Lindner6-22/+22
Batman-adv works with "hard interfaces" as well as "soft interfaces". The new name should better make clear which kind of interfaces this list stores. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-03-05batman-adv: remove orig_hash spinlockMarek Lindner7-148/+38
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-03-05batman-adv: increase refcount in create_neighbor to be consistentMarek Lindner2-37/+30
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-03-05batman-adv: Correct rcu refcounting for orig_nodeMarek Lindner9-36/+49
It might be possible that 2 threads access the same data in the same rcu grace period. The first thread calls call_rcu() to decrement the refcount and free the data while the second thread increases the refcount to use the data. To avoid this race condition all refcount operations have to be atomic. Reported-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-03-05batman-adv: remove extra layer between hash and hash element - hash bucketMarek Lindner10-294/+298
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-03-05batman-adv: separate ethernet comparing calls from hash functionsMarek Lindner8-42/+51
Note: The function compare_ether_addr() provided by the Linux kernel requires aligned memory. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-03-05batman-adv: Fix possible buffer overflow in softif neigh list outputLinus Lüssing1-21/+1
When printing the soft interface table the number of entries in the softif neigh list are first being counted and a fitting buffer allocated. After that the softif neigh list gets locked again and the buffer printed - which has the following two issues: For one thing, the softif neigh list might have grown when reacquiring the rcu lock, which results in writing outside of the allocated buffer. Furthermore 31 Bytes are not enough for printing an entry with a vid of more than 2 digits. The manual buffering is unnecessary, we can safely print to the seq directly during the rcu_read_lock(). Signed-off-by: Linus Lüssing <linus.luessing@ascom.ch> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-03-05batman-adv: Increase orig_node refcount before releasing rcu read lockLinus Lüssing2-3/+5
When unicast_send_skb() is increasing the orig_node's refcount another thread might have been freeing this orig_node already. We need to increase the refcount in the rcu read lock protected area to avoid that. Signed-off-by: Linus Lüssing <linus.luessing@ascom.ch> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-03-05batman-adv: Make bat_priv->curr_gw an rcu protected pointerLinus Lüssing2-32/+72
The rcu protected macros rcu_dereference() and rcu_assign_pointer() for the bat_priv->curr_gw need to be used, as well as spin/rcu locking. Otherwise we might end up using a curr_gw pointer pointing to already freed memory. Reported-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Linus Lüssing <linus.luessing@ascom.ch> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-03-05batman-adv: make broadcast seqno operations atomicMarek Lindner3-22/+37
Batman-adv could receive several payload broadcasts at the same time that would trigger access to the broadcast seqno sliding window to determine whether this is a new broadcast or not. If these incoming broadcasts are accessing the sliding window simultaneously it could be left in an inconsistent state. Therefore it is necessary to make sure this access is atomic. Reported-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-03-05batman-adv: protect bit operations to count OGMs with spinlockMarek Lindner2-34/+33
Reported-by: Linus Lüssing <linus.luessing@saxnet.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-03-05batman-adv: Correct rcu refcounting for batman_ifMarek Lindner4-38/+33
It might be possible that 2 threads access the same data in the same rcu grace period. The first thread calls call_rcu() to decrement the refcount and free the data while the second thread increases the refcount to use the data. To avoid this race condition all refcount operations have to be atomic. Reported-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-03-05batman-adv: Correct rcu refcounting for softif_neighMarek Lindner2-17/+16
It might be possible that 2 threads access the same data in the same rcu grace period. The first thread calls call_rcu() to decrement the refcount and free the data while the second thread increases the refcount to use the data. To avoid this race condition all refcount operations have to be atomic. Reported-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-03-05batman-adv: Correct rcu refcounting for gw_nodeMarek Lindner2-22/+17
It might be possible that 2 threads access the same data in the same rcu grace period. The first thread calls call_rcu() to decrement the refcount and free the data while the second thread increases the refcount to use the data. To avoid this race condition all refcount operations have to be atomic. Reported-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-03-05batman-adv: Correct rcu refcounting for neigh_nodeMarek Lindner7-174/+313
It might be possible that 2 threads access the same data in the same rcu grace period. The first thread calls call_rcu() to decrement the refcount and free the data while the second thread increases the refcount to use the data. To avoid this race condition all refcount operations have to be atomic. Reported-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-03-05batman-adv: protect bonding with rcu locksSimon Wunderlich7-163/+195
bonding / alternating candidates need to be secured by rcu locks as well. This patch therefore converts the bonding list from a plain pointer list to a rcu securable lists and references the bonding candidates. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-03-05batman-adv: protect ogm counter arrays with spinlockMarek Lindner3-6/+33
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-03-05batman-adv: protect originator nodes with reference countersMarek Lindner4-19/+78
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-03-05batman-adv: protect each hash row with rcu locksMarek Lindner8-45/+141
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-03-05batman-adv: protect neigh_nodes used outside of rcu_locks with refcountingMarek Lindner1-9/+31
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-03-05batman-adv: free neighbors when an interface is deactivatedMarek Lindner1-2/+7
hardif_disable_interface() calls purge_orig_ref() to immediately free all neighbors associated with the interface that is going down. purge_orig_neighbors() checked if the interface status is IF_INACTIVE which is set to IF_NOT_IN_USE shortly before calling purge_orig_ref(). Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-03-05batman-adv: protect neighbor list with rcu locksMarek Lindner3-21/+57
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-03-05batman-adv: convert neighbor list to hlistMarek Lindner3-28/+35
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-03-05batman-adv: protect neighbor nodes with reference countersMarek Lindner4-8/+28
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.