aboutsummaryrefslogtreecommitdiffstats
path: root/net (follow)
AgeCommit message (Collapse)AuthorFilesLines
2008-03-25[NETFILTER]: nf_conntrack_sip: update copyrightPatrick McHardy2-0/+4
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-25[NETFILTER]: nf_conntrack_sip: RTP routing optimizationPatrick McHardy2-10/+52
Optimize call routing between NATed endpoints: when an external registrar sends a media description that contains an existing RTP expectation from a different SNATed connection, the gatekeeper is trying to route the call directly between the two endpoints. We assume both endpoints can reach each other directly and "un-NAT" the addresses, which makes the media stream go between the two endpoints directly. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-25[NETFILTER]: nf_conntrack_sip: support multiple media channelsPatrick McHardy1-31/+90
Add support for multiple media channels and use it to create expectations for video streams when present. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-25[NETFILTER]: nf_nat_sip: split up SDP manglingPatrick McHardy2-64/+199
The SDP connection addresses may be contained in the payload multiple times (in the session description and/or once per media description), currently only the session description is properly updated. Split up SDP mangling so the function setting up expectations only updates the media port, update connection addresses from media descriptions while parsing them and at the end update the session description when the final addresses are known. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-25[NETFILTER]: nf_conntrack_sip: create RTCP expectationsPatrick McHardy2-36/+64
Create expectations for the RTCP connections in addition to RTP connections. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-25[NETFILTER]: nf_conntrack_sip: allow media expectations with wildcard source addressPatrick McHardy1-4/+41
Media streams can come from anywhere, add a module parameter which controls whether wildcard expectations or expectations between the two signalling endpoints are created. Since the same media description sent on multiple connections may results in multiple identical expections when using a wildcard source, we need to check whether a similar expectation already exists for a different connection before attempting to register it. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-25[NETFILTER]: nf_conntrack_sip: create signalling expectationsPatrick McHardy2-32/+311
Create expectations for incoming signalling connections when seeing a REGISTER request. This is needed when the registrar uses a different source port number for signalling messages and for receiving incoming calls from other endpoints than the registrar. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-25[NETFILTER]: nf_nat_sip: translate all Contact headersPatrick McHardy1-4/+15
The SIP message may contain multiple Contact: addresses referring to the NATed endpoint, translate all of them. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-25[NETFILTER]: nf_nat_sip: translate all Via headersPatrick McHardy1-1/+73
Update maddr=, received= and rport= Via-header parameters refering to the signalling connection. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-25[NETFILTER]: nf_conntrack_sip: introduce URI and header parameter parsing helpersPatrick McHardy1-0/+58
Introduce URI and header parameter parsing helpers. These are needed by the conntrack helper to parse expiration values in Contact: header parameters and by the NAT helper to properly update the Via-header rport=, received= and maddr= parameters. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-25[NETFILTER]: nf_conntrack_sip: flush expectations on call terminationPatrick McHardy1-4/+48
Flush the RTP expectations we've created when a call is hung up or terminated otherwise. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-25[NETFILTER]: nf_conntrack_sip: process ACK and PRACK methodsPatrick McHardy1-0/+13
Both may contains SDP offers/answers. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-25[NETFILTER]: nf_conntrack_sip: perform NAT after parsingPatrick McHardy2-11/+11
Perform NAT last after parsing the packet. This makes no difference currently, but is needed when dealing with registrations to make sure we seen the unNATed addresses. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-25[NETFILTER]: nf_conntrack_sip: support method specific request/response handlingPatrick McHardy1-10/+97
Add support for per-method request/response handlers and perform SDP parsing for INVITE/UPDATE requests and for all informational and successful responses. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-25[NETFILTER]: nf_conntrack_sip: move SDP parsing to seperate functionPatrick McHardy1-41/+43
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-25[NETFILTER]: nf_nat_sip: get rid of text based header translationPatrick McHardy2-67/+60
Use the URI parsing helper to get the numerical addresses and get rid of the text based header translation. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-25[NETFILTER]: nf_conntrack_sip: introduce SIP-URI parsing helperPatrick McHardy1-0/+107
Introduce a helper function to parse a SIP-URI in a header value, optionally iterating through all headers of this kind. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-25[NETFILTER]: nf_conntrack_sip: parse SIP headers properlyPatrick McHardy2-153/+136
Introduce new function for SIP header parsing that properly deals with continuation lines and whitespace in headers and use it. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-25[NETFILTER]: nf_conntrack_sip: kill request URI "header" definitionsPatrick McHardy2-36/+74
The request URI is not a header and needs to be treated differently than real SIP headers. Add a seperate function for parsing it and get rid of the POS_REQ_URI/POS_REG_REQ_URI definitions. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-25[NETFILTER]: nf_conntrack_sip: add seperate SDP header parsing functionPatrick McHardy2-102/+126
SDP and SIP headers are quite different, SIP can have continuation lines, leading and trailing whitespace after the colon and is mostly case-insensitive while SDP headers always begin on a new line and are followed by an equal sign and the value, without any whitespace. Introduce new SDP header parsing function and convert all users that used the SIP header parsing function. This will allow to properly deal with the special SIP cases in the SIP header parsing function later. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-25[NETFILTER]: nf_conntrack_sip: use strlen/strcmpPatrick McHardy2-12/+12
Replace sizeof/memcmp by strlen/strcmp. Use case-insensitive comparison for SIP methods and the SIP/2.0 string, as specified in RFC 3261. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-25[NETFILTER]: nf_conntrack_sip: remove redundant function argumentsPatrick McHardy2-38/+35
The conntrack reference and ctinfo can be derived from the packet. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-25[NETFILTER]: nf_conntrack_sip: adjust dptr and datalen after packet manglingPatrick McHardy2-49/+56
After mangling the packet, the pointer to the data and the length of the data portion may change and need to be adjusted. Use double data pointers and a pointer to the length everywhere and add a helper function to the NAT helper for performing the adjustments. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-25[NETFILTER]: nf_conntrack_sip: fix some off-by-onesPatrick McHardy1-8/+8
"limit" marks the first character outside the bounds. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-25[NETFILTER]: nf_nat_sip: fix NAT setup orderPatrick McHardy1-6/+6
We need to set up the destination NAT mapping before the source NAT mapping, so the NAT core gets to see the final tuple and can decide whether the source port needs to be remapped. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-25[NETFILTER]: nf_conntrack: introduce expectation classes and policiesPatrick McHardy12-72/+148
Introduce expectation classes and policies. An expectation class is used to distinguish different types of expectations by the same helper (for example audio/video/t.120). The expectation policy is used to hold the maximum number of expectations and the initial timeout for each class. The individual classes are isolated from each other, which means that for example an audio expectation will only evict other audio expectations. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-25[NETFILTER]: nf_conntrack_expect: support inactive expectationsPatrick McHardy1-4/+21
This is useful for the SIP helper and signalling expectations. We don't want to create a full-blown expectation with a wildcard as source based on a single UDP packet, but need to know the final port anyways. With inactive expectations we can register the expectation and reserve the tuple, but wait for confirmation from the registrar before activating it. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-25[NETFILTER]: nf_conntrack_expect: show NF_CT_EXPECT_PERMANENT flag in /procPatrick McHardy1-0/+4
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-25[NETFILTER]: nf_conntrack_expect: constify nf_ct_expect_init argumentsPatrick McHardy1-3/+3
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-25[NETFILTER]: ipt_CLUSTERIP: fix non-existant macro-namePatrick McHardy1-1/+1
With nf_conntrack DUMP_TUPLE got renamed to NF_CT_DUMP_TUPLE, fix CLUSTERIP to use the proper macro name. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-25Merge branch 'net-2.6.26-netns-20080326' of git://git.linux-ipv6.org/gitroot/yoshfuji/linux-2.6-devDavid S. Miller107-446/+451
2008-03-25Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.26David S. Miller8-74/+186
2008-03-25mac80211: configure default wmm params correctlyVladimir Koutny1-33/+58
Default WMM params have to be set according to beacon/probe response information prior to authentication (or IBSS start/join); beacon queue is configured only in IBSS. This does not affect the use of 'real' WMM params as reported by AP. Signed-off-by: Vladimir Koutny <vlado@ksp.sk> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25mac80211: prevent tuning during scanningMohamed Abbas2-1/+4
Postpone calling ieee80211_hw_config if hardware scanning is active. This is similar to solution for software scanning where channel setting is delayed until scan complete. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25mac80211: tear down of block ack sessionsRon Rindjunsky3-7/+17
This patch adds a clean tear down for all block ack sessions if interface goes down or if a deauthentication is done. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25mac80211: fixing debug prints for AddBA requestRon Rindjunsky1-4/+4
This patch also fixes the Rx timer's comments Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25mac80211: fixing delba debug printRon Rindjunsky1-1/+1
This patch fixes a wrong debug print when receiving delba Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25mac80211: filter scan results on unusable channelsJohannes Berg1-0/+6
When you have an AP on channel 13, it will currently often enough be listed in scan results even when the regulatory domain restricts to channels 1-11. This is due to channel overlap. To avoid getting very strange failures, don't show such APs in the scan results. The failure mode will now go from "I can see the AP but not associate" to "I can't see the AP although I know it's there" which is easier to debug. This problem was first really noticed by Jes Sorensen. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Jes Sorensen <jes@trained-monkey.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25mac80211: use ieee80211_get_channelJohannes Berg1-25/+4
Use the new ieee80211_get_channel() function instead of open-coding it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25wireless: add wiphy channel freq to channel struct lookup helperJohannes Berg1-0/+23
Add ieee80211_get_channel() which gets you a channel struct for a specific wiphy if that channel is present in that wiphy. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25mac80211: allows driver to request a Phase 1 RX keyEmmanuel Grumbach3-3/+16
This patch makes mac80211 able to send a phase1 key for TKIP decryption. This is needed for drivers that don't do the rekeying by themselves (i.e. iwlwifi). Upon IV16 wrap around, the packet is decrypted in SW, if decryption is ok, mac80211 calls to update_tkip_key with a new phase 1 RX key. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25mac80211: get a TKIP phase key from skbEmmanuel Grumbach1-0/+53
This patch makes mac80211 able to compute a TKIP key from an skb. The requested key can be a phase 1 or a phase 2 key. This is useful for drivers who need to provide tkip key to their HW to enable HW encryption. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-26[NET] NETNS: Omit namespace comparision without CONFIG_NET_NS.YOSHIFUJI Hideaki13-44/+44
Introduce an inline net_eq() to compare two namespaces. Without CONFIG_NET_NS, since no namespace other than &init_net exists, it is always 1. We do not need to convert 1) inline vs inline and 2) inline vs &init_net comparisons. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-26[NET] NETNS: Omit neigh_parms->net and pneigh_entry->net without CONFIG_NET_NS.YOSHIFUJI Hideaki1-10/+16
Introduce neigh_parms/pneigh_entry inlines: neigh_parms_net(), pneigh_net(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-26[NET] NETNS: Omit seq_net_private->net without CONFIG_NET_NS.YOSHIFUJI Hideaki10-44/+43
Without CONFIG_NET_NS, no namespace other than &init_net exists, no need to store net in seq_net_private. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-26[NET] NETNS: Omit sock->sk_net without CONFIG_NET_NS.YOSHIFUJI Hideaki64-205/+205
Introduce per-sock inlines: sock_net(), sock_net_set() and per-inet_timewait_sock inlines: twsk_net(), twsk_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-26[NET] NETNS: Omit net_device->nd_net without CONFIG_NET_NS.YOSHIFUJI Hideaki68-200/+200
Introduce per-net_device inlines: dev_net(), dev_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25[IPV6]: Support Source Address Selection API (RFC5014).YOSHIFUJI Hideaki8-9/+123
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25[IPV6]: Optimize hop-limit determination.YOSHIFUJI Hideaki6-27/+17
Last part of hop-limit determination is always: hoplimit = dst_metric(dst, RTAX_HOPLIMIT); if (hoplimit < 0) hoplimit = ipv6_get_hoplimit(dst->dev). Let's consolidate it as ip6_dst_hoplimit(dst). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25[IPV4,IPV6]: Share cork.rt between IPv4 and IPv6.YOSHIFUJI Hideaki2-14/+12
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.