aboutsummaryrefslogtreecommitdiffstats
path: root/net (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-02-06bridge: move to workqueue gcNikolay Aleksandrov10-23/+29
Move the fdb garbage collector to a workqueue which fires at least 10 milliseconds apart and cleans chain by chain allowing for other tasks to run in the meantime. When having thousands of fdbs the system is much more responsive. Most importantly remove the need to check if the matched entry has expired in __br_fdb_get that causes false-sharing and is completely unnecessary if we cleanup entries, at worst we'll get 10ms of traffic for that entry before it gets deleted. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-06bridge: modify bridge and port to have often accessed fields in one cache lineNikolay Aleksandrov1-23/+20
Move around net_bridge so the vlan fields are in the beginning since they're checked on every packet even if vlan filtering is disabled. For the port move flags & vlan group to the beginning, so they're in the same cache line with the port's state (both flags and state are checked on each packet). Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-06net: dsa: introduce bridge notifierVivien Didelot2-11/+61
A slave device will now notify the switch fabric once its port is bridged or unbridged, instead of calling directly its switch operations. This code allows propagating cross-chip bridging events in the fabric. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-06net: dsa: add switch notifierVivien Didelot5-0/+70
Add a notifier block per DSA switch, registered against a notifier head in the switch fabric they belong to. This infrastructure will allow to propagate fabric-wide events such as port bridging, VLAN configuration, etc. If a DSA switch driver cares about cross-chip configuration, such events can be caught. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-06net: dsa: change state setter scopeVivien Didelot1-6/+9
The scope of the functions inside net/dsa/slave.c must be the slave net_device pointer. Change to state setter helper accordingly to simplify callers. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-06net: dsa: rollback bridging on errorVivien Didelot1-1/+13
When an error is returned during the bridging of a port in a NETDEV_CHANGEUPPER event, net/core/dev.c rolls back the operation. Be consistent and unassign dp->bridge_dev when this happens. In the meantime, add comments to document this behavior. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-06net: dsa: simplify netdevice events handlingVivien Didelot1-28/+16
Simplify the code handling the slave netdevice notifier call by providing a dsa_slave_changeupper helper for NETDEV_CHANGEUPPER, and so on (only this event is supported at the moment.) Return NOTIFY_DONE when we did not care about an event, and NOTIFY_OK when we were concerned but no error occurred, as the API suggests. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-06net: dsa: move netdevice notifier registrationVivien Didelot3-10/+26
Move the netdevice notifier block register code in slave.c and provide helpers for dsa.c to register and unregister it. At the same time, check for errors since (un)register_netdevice_notifier may fail. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-06net-next: treewide use is_vlan_dev() helper function.Parav Pandit1-1/+2
This patch makes use of is_vlan_dev() function instead of flag comparison which is exactly done by is_vlan_dev() helper function. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jon Maxwell <jmaxwell37@gmail.com> Acked-by: Johannes Thumshirn <jth@kernel.org> Acked-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-06sctp: process fwd tsn chunk only when prsctp is enabledXin Long1-0/+6
This patch is to check if asoc->peer.prsctp_capable is set before processing fwd tsn chunk, if not, it will return an ERROR to the peer, just as rfc3758 section 3.3.1 demands. Reported-by: Julian Cordes <julian.cordes@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-06net: remove ndo_neigh_{construct, destroy} from stacked devicesIdo Schimmel3-48/+0
In commit 18bfb924f000 ("net: introduce default neigh_construct/destroy ndo calls for L2 upper devices") we added these ndos to stacked devices such as team and bond, so that calls will be propagated to mlxsw. However, previous commit removed the reliance on these ndos and no new users of these ndos have appeared since above mentioned commit. We can therefore safely remove this dead code. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-05net: remove __napi_complete()Eric Dumazet1-21/+3
All __napi_complete() callers have been converted to use the more standard napi_complete_done(), we can now remove this NAPI method for good. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-04net: ipv6: Use compressed IPv6 addresses showing route replace errorDavid Ahern1-1/+1
ip6_print_replace_route_err logs an error if a route replace fails with IPv6 addresses in the full format. e.g,: IPv6: IPV6: multipath route replace failed (check consistency of installed routes): 2001:0db8:0200:0000:0000:0000:0000:0000 nexthop 2001:0db8:0001:0000:0000:0000:0000:0016 ifi 0 Change the message to dump the addresses in the compressed format. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-04net: ipv6: Change notifications for multipath delete to RTA_MULTIPATHDavid Ahern2-1/+28
If an entire multipath route is deleted using prefix and len (without any nexthops), send a single RTM_DELROUTE notification with the full route using RTA_MULTIPATH. This is done by generating the skb before the route delete when all of the sibling routes are still present but sending it after the route has been removed from the FIB. The skip_notify flag is used to tell the lower fib code not to send notifications for the individual nexthop routes. If a route is deleted using RTA_MULTIPATH for any nexthops or a single nexthop entry is deleted, then the nexthops are deleted one at a time with notifications sent as each hop is deleted. This is necessary given that IPv6 allows individual hops within a route to be deleted. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-04net: ipv6: Change notifications for multipath add to RTA_MULTIPATHDavid Ahern2-3/+53
Change ip6_route_multipath_add to send one notifciation with the full route encoded with RTA_MULTIPATH instead of a series of individual routes. This is done by adding a skip_notify flag to the nl_info struct. The flag is used to skip sending of the notification in the fib code that actually inserts the route. Once the full route has been added, a notification is generated with all nexthops. ip6_route_multipath_add handles 3 use cases: new routes, route replace, and route append. The multipath notification generated needs to be consistent with the order of the nexthops and it should be consistent with the order in a FIB dump which means the route with the first nexthop needs to be used as the route reference. For the first 2 cases (new and replace), a reference to the route used to send the notification is obtained by saving the first route added. For the append case, the last route added is used to loop back to its first sibling route which is the first nexthop in the multipath route. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-04net: ipv6: Add support to dump multipath routes via RTA_MULTIPATH attributeDavid Ahern2-17/+105
IPv6 returns multipath routes as a series of individual routes making their display and handling by userspace different and more complicated than IPv4, putting the burden on the user to see that a route is part of a multipath route and internally creating a multipath route if desired (e.g., libnl does this as of commit 29b71371e764). This patch addresses this difference, allowing multipath routes to be returned using the RTA_MULTIPATH attribute. The end result is that IPv6 multipath routes can be treated and displayed in a format similar to IPv4: $ ip -6 ro ls vrf red 2001:db8:1::/120 dev eth1 proto kernel metric 256 pref medium 2001:db8:2::/120 dev eth2 proto kernel metric 256 pref medium 2001:db8:200::/120 metric 1024 nexthop via 2001:db8:1::2 dev eth1 weight 1 nexthop via 2001:db8:2::2 dev eth2 weight 1 Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-04net: ipv6: Allow shorthand delete of all nexthops in multipath routeDavid Ahern1-2/+36
IPv4 allows multipath routes to be deleted using just the prefix and length. For example: $ ip ro ls vrf red unreachable default metric 8192 1.1.1.0/24 nexthop via 10.100.1.254 dev eth1 weight 1 nexthop via 10.11.200.2 dev eth11.200 weight 1 10.11.200.0/24 dev eth11.200 proto kernel scope link src 10.11.200.3 10.100.1.0/24 dev eth1 proto kernel scope link src 10.100.1.3 $ ip ro del 1.1.1.0/24 vrf red $ ip ro ls vrf red unreachable default metric 8192 10.11.200.0/24 dev eth11.200 proto kernel scope link src 10.11.200.3 10.100.1.0/24 dev eth1 proto kernel scope link src 10.100.1.3 The same notation does not work with IPv6 because of how multipath routes are implemented for IPv6. For IPv6 only the first nexthop of a multipath route is deleted if the request contains only a prefix and length. This leads to unnecessary complexity in userspace dealing with IPv6 multipath routes. This patch allows all nexthops to be deleted without specifying each one in the delete request. Internally, this is done by walking the sibling list of the route matching the specifications given (prefix, length, metric, protocol, etc). $ ip -6 ro ls vrf red 2001:db8:1::/120 dev eth1 proto kernel metric 256 pref medium 2001:db8:2::/120 dev eth2 proto kernel metric 256 pref medium 2001:db8:200::/120 via 2001:db8:1::2 dev eth1 metric 1024 pref medium 2001:db8:200::/120 via 2001:db8:2::2 dev eth2 metric 1024 pref medium ... $ ip -6 ro del vrf red 2001:db8:200::/120 $ ip -6 ro ls vrf red 2001:db8:1::/120 dev eth1 proto kernel metric 256 pref medium 2001:db8:2::/120 dev eth2 proto kernel metric 256 pref medium ... Because IPv6 allows individual nexthops to be deleted without deleting the entire route, the ip6_route_multipath_del and non-multipath code path (ip6_route_del) have to be discriminated so that all nexthops are only deleted for the latter case. This is done by making the existing fc_type in fib6_config a u16 and then adding a new u16 field with fc_delete_all_nh as the first bit. Suggested-by: Dinesh Dutt <ddutt@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03net: skb_needs_check() accepts CHECKSUM_NONE for txEric Dumazet1-3/+4
My recent change missed fact that UFO would perform a complete UDP checksum before segmenting in frags. In this case skb->ip_summed is set to CHECKSUM_NONE. We need to add this valid case to skb_needs_check() Fixes: b2504a5dbef3 ("net: reduce skb_warn_bad_offload() noise") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03net: remove support for per driver ndo_busy_poll()Eric Dumazet2-16/+0
We added generic support for busy polling in NAPI layer in linux-4.5 No network driver uses ndo_busy_poll() anymore, we can get rid of the pointer in struct net_device_ops, and its use in sk_busy_loop() Saves NETIF_F_BUSY_POLL features bit. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller53-640/+576
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for your net-next tree, they are: 1) Stash ctinfo 3-bit field into pointer to nf_conntrack object from sk_buff so we only access one single cacheline in the conntrack hotpath. Patchset from Florian Westphal. 2) Don't leak pointer to internal structures when exporting x_tables ruleset back to userspace, from Willem DeBruijn. This includes new helper functions to copy data to userspace such as xt_data_to_user() as well as conversions of our ip_tables, ip6_tables and arp_tables clients to use it. Not surprinsingly, ebtables requires an ad-hoc update. There is also a new field in x_tables extensions to indicate the amount of bytes that we copy to userspace. 3) Add nf_log_all_netns sysctl: This new knob allows you to enable logging via nf_log infrastructure for all existing netnamespaces. Given the effort to provide pernet syslog has been discontinued, let's provide a way to restore logging using netfilter kernel logging facilities in trusted environments. Patch from Michal Kubecek. 4) Validate SCTP checksum from conntrack helper, from Davide Caratti. 5) Merge UDPlite conntrack and NAT helpers into UDP, this was mostly a copy&paste from the original helper, from Florian Westphal. 6) Reset netfilter state when duplicating packets, also from Florian. 7) Remove unnecessary check for broadcast in IPv6 in pkttype match and nft_meta, from Liping Zhang. 8) Add missing code to deal with loopback packets from nft_meta when used by the netdev family, also from Liping. 9) Several cleanups on nf_tables, one to remove unnecessary check from the netlink control plane path to add table, set and stateful objects and code consolidation when unregister chain hooks, from Gao Feng. 10) Fix harmless reference counter underflow in IPVS that, however, results in problems with the introduction of the new refcount_t type, from David Windsor. 11) Enable LIBCRC32C from nf_ct_sctp instead of nf_nat_sctp, from Davide Caratti. 12) Missing documentation on nf_tables uapi header, from Liping Zhang. 13) Use rb_entry() helper in xt_connlimit, from Geliang Tang. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03sched: cls_flower: expose priority to offloading netdeviceJiri Pirko1-0/+3
The driver that offloads flower rules needs to know with which priority user inserted the rules. So add this information into offload struct. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03tcp: clear pfmemalloc on outgoing skbEric Dumazet1-0/+7
Josef Bacik diagnosed following problem : I was seeing random disconnects while testing NBD over loopback. This turned out to be because NBD sets pfmemalloc on it's socket, however the receiving side is a user space application so does not have pfmemalloc set on its socket. This means that sk_filter_trim_cap will simply drop this packet, under the assumption that the other side will simply retransmit. Well we do retransmit, and then the packet is just dropped again for the same reason. It seems the better way to address this problem is to clear pfmemalloc in the TCP transmit path. pfmemalloc strict control really makes sense on the receive path. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03net: ipv6: Set protocol to kernel for local routesDavid Ahern1-0/+1
IPv6 stack does not set the protocol for local routes, so those routes show up with proto "none": $ ip -6 ro ls table local local ::1 dev lo proto none metric 0 pref medium local 2100:3:: dev lo proto none metric 0 pref medium local 2100:3::4 dev lo proto none metric 0 pref medium local fe80:: dev lo proto none metric 0 pref medium ... Set rt6i_protocol to RTPROT_KERNEL for consistency with IPv4. Now routes show up with proto "kernel": $ ip -6 ro ls table local local ::1 dev lo proto kernel metric 0 pref medium local 2100:3:: dev lo proto kernel metric 0 pref medium local 2100:3::4 dev lo proto kernel metric 0 pref medium local fe80:: dev lo proto kernel metric 0 pref medium ... Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03bridge: vlan dst_metadata hooks in ingress and egress pathsRoopa Prabhu6-2/+82
- ingress hook: - if port is a tunnel port, use tunnel info in attached dst_metadata to map it to a local vlan - egress hook: - if port is a tunnel port, use tunnel info attached to vlan to set dst_metadata on the skb CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03bridge: per vlan dst_metadata netlink supportRoopa Prabhu7-48/+641
This patch adds support to attach per vlan tunnel info dst metadata. This enables bridge driver to map vlan to tunnel_info at ingress and egress. It uses the kernel dst_metadata infrastructure. The initial use case is vlan to vni bridging, but the api is generic to extend to any tunnel_info in the future: - Uapi to configure/unconfigure/dump per vlan tunnel data - netlink functions to configure vlan and tunnel_info mapping - Introduces bridge port flag BR_LWT_VLAN to enable attach/detach dst_metadata to bridged packets on ports. off by default. - changes to existing code is mainly refactor some existing vlan handling netlink code + hooks for new vlan tunnel code - I have kept the vlan tunnel code isolated in separate files. - most of the netlink vlan tunnel code is handling of vlan-tunid ranges (follows the vlan range handling code). To conserve space vlan-tunid by default are always dumped in ranges if applicable. Use case: example use for this is a vxlan bridging gateway or vtep which maps vlans to vn-segments (or vnis). iproute2 example (patched and pruned iproute2 output to just show relevant fdb entries): example shows same host mac learnt on two vni's and vlan 100 maps to vni 1000, vlan 101 maps to vni 1001 before (netdev per vni): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan1001 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan1000 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self after this patch with collect metdata in bridged mode (single netdev): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan0 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan0 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03net/sched: act_ife: Change to use ife moduleYotam Gigi2-78/+33
Use the encode/decode functionality from the ife module instead of using implementation inside the act_ife. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03net: Introduce ife encapsulation moduleYotam Gigi5-0/+165
This module is responsible for the ife encapsulation protocol encode/decode logics. That module can: - ife_encode: encode skb and reserve space for the ife meta header - ife_decode: decode skb and extract the meta header size - ife_tlv_meta_encode - encodes one tlv entry into the reserved ife header space. - ife_tlv_meta_decode - decodes one tlv entry from the packet - ife_tlv_meta_next - advance to the next tlv Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03net/sched: act_ife: Unexport ife_tlv_meta_encodeYotam Gigi1-2/+2
As the function ife_tlv_meta_encode is not used by any other module, unexport it and make it static for the act_ife module. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03tcp: add tcp_mss_clamp() helperEric Dumazet4-23/+8
Small cleanup factorizing code doing the TCP_MAXSEG clamping. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02net: add LINUX_MIB_PFMEMALLOCDROP counterEric Dumazet2-2/+4
Debugging issues caused by pfmemalloc is often tedious. Add a new SNMP counter to more easily diagnose these problems. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Josef Bacik <jbacik@fb.com> Acked-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02net: ipv4: remove fib_lookup.h from devinet.c include listDavid Ahern1-2/+0
nothing in devinet.c relies on fib_lookup.h; remove it from the includes Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02net: remove useless pfmemalloc settingEric Dumazet1-1/+0
When __alloc_skb() allocates an skb from fast clone cache, setting pfmemalloc on the clone is not needed. Clone will be properly initialized later at skb_clone() time, including pfmemalloc field, as it is included in the headers_start/headers_end section which is fully copied. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02unix: add ioctl to open a unix socket file with O_PATHAndrey Vagin1-0/+41
This ioctl opens a file to which a socket is bound and returns a file descriptor. The caller has to have CAP_NET_ADMIN in the socket network namespace. Currently it is impossible to get a path and a mount point for a socket file. socket_diag reports address, device ID and inode number for unix sockets. An address can contain a relative path or a file may be moved somewhere. And these properties say nothing about a mount namespace and a mount point of a socket file. With the introduced ioctl, we can get a path by reading /proc/self/fd/X and get mnt_id from /proc/self/fdinfo/X. In CRIU we are going to use this ioctl to dump and restore unix socket. Here is an example how it can be used: $ strace -e socket,bind,ioctl ./test /tmp/test_sock socket(AF_UNIX, SOCK_STREAM, 0) = 3 bind(3, {sa_family=AF_UNIX, sun_path="test_sock"}, 11) = 0 ioctl(3, SIOCUNIXFILE, 0) = 4 ^Z $ ss -a | grep test_sock u_str LISTEN 0 1 test_sock 17798 * 0 $ ls -l /proc/760/fd/{3,4} lrwx------ 1 root root 64 Feb 1 09:41 3 -> 'socket:[17798]' l--------- 1 root root 64 Feb 1 09:41 4 -> /tmp/test_sock $ cat /proc/760/fdinfo/4 pos: 0 flags: 012000000 mnt_id: 40 $ cat /proc/self/mountinfo | grep "^40\s" 40 19 0:37 / /tmp rw shared:23 - tmpfs tmpfs rw Signed-off-by: Andrei Vagin <avagin@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller12-104/+93
All merge conflicts were simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02netfilter: allow logging from non-init namespacesMichal Kubeček5-4/+28
Commit 69b34fb996b2 ("netfilter: xt_LOG: add net namespace support for xt_LOG") disabled logging packets using the LOG target from non-init namespaces. The motivation was to prevent containers from flooding kernel log of the host. The plan was to keep it that way until syslog namespace implementation allows containers to log in a safe way. However, the work on syslog namespace seems to have hit a dead end somewhere in 2013 and there are users who want to use xt_LOG in all network namespaces. This patch allows to do so by setting /proc/sys/net/netfilter/nf_log_all_netns to a nonzero value. This sysctl is only accessible from init_net so that one cannot switch the behaviour from inside a container. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-02-02ipvs: free ip_vs_dest structs when refcnt=0David Windsor1-5/+3
Currently, the ip_vs_dest cache frees ip_vs_dest objects when their reference count becomes < 0. Aside from not being semantically sound, this is problematic for the new type refcount_t, which will be introduced shortly in a separate patch. refcount_t is the new kernel type for holding reference counts, and provides overflow protection and a constrained interface relative to atomic_t (the type currently being used for kernel reference counts). Per Julian Anastasov: "The problem is that dest_trash currently holds deleted dests (unlinked from RCU lists) with refcnt=0." Changing dest_trash to hold dest with refcnt=1 will allow us to free ip_vs_dest structs when their refcnt=0, in ip_vs_dest_put_and_free(). Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-02-02netfilter: merge ctinfo into nfct pointer storage areaFlorian Westphal5-9/+13
After this change conntrack operations (lookup, creation, matching from ruleset) only access one instead of two sk_buff cache lines. This works for normal conntracks because those are allocated from a slab that guarantees hw cacheline or 8byte alignment (whatever is larger) so the 3 bits needed for ctinfo won't overlap with nf_conn addresses. Template allocation now does manual address alignment (see previous change) on arches that don't have sufficent kmalloc min alignment. Some spots intentionally use skb->_nfct instead of skb_nfct() helpers, this is to avoid undoing the skb_nfct() use when we remove untracked conntrack object in the future. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-02-02netfilter: guarantee 8 byte minalign for template addressesFlorian Westphal1-5/+24
The next change will merge skb->nfct pointer and skb->nfctinfo status bits into single skb->_nfct (unsigned long) area. For this to work nf_conn addresses must always be aligned at least on an 8 byte boundary since we will need the lower 3bits to store nfctinfo. Conntrack templates are allocated via kmalloc. kbuild test robot reported BUILD_BUG_ON failed: NFCT_INFOMASK >= ARCH_KMALLOC_MINALIGN on v1 of this patchset, so not all platforms meet this requirement. Do manual alignment if needed, the alignment offset is stored in the nf_conn entry protocol area. This works because templates are not handed off to L4 protocol trackers. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-02-02netfilter: add and use nf_ct_set helperFlorian Westphal10-32/+15
Add a helper to assign a nf_conn entry and the ctinfo bits to an sk_buff. This avoids changing code in followup patch that merges skb->nfct and skb->nfctinfo into skb->_nfct. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-02-02skbuff: add and use skb_nfct helperFlorian Westphal13-25/+25
Followup patch renames skb->nfct and changes its type so add a helper to avoid intrusive rename change later. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-02-02netfilter: reduce direct skb->nfct usageFlorian Westphal1-6/+9
Next patch makes direct skb->nfct access illegal, reduce noise in next patch by using accessors we already have. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-02-02netfilter: reset netfilter state when duplicating packetFlorian Westphal2-2/+2
We should also toss nf_bridge_info, if any -- packet is leaving via ip_local_out, also, this skb isn't bridged -- it is a locally generated copy. Also this avoids the need to touch this later when skb->nfct is replaced with 'unsigned long _nfct' in followup patch. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-02-02netfilter: conntrack: no need to pass ctinfo to error handlerFlorian Westphal7-19/+15
It is never accessed for reading and the only places that write to it are the icmp(6) handlers, which also set skb->nfct (and skb->nfctinfo). The conntrack core specifically checks for attached skb->nfct after ->error() invocation and returns early in this case. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-02-02netfilter: nf_tables: Eliminate duplicated code in nf_tables_table_enable()Feng1-23/+25
If something fails in nf_tables_table_enable(), it unregisters the chains. But the rollback code is the same as nf_tables_table_disable() almostly, except there is one counter check. Now create one wrapper function to eliminate the duplicated codes. Signed-off-by: Feng <fgao@ikuai8.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-02-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds10-103/+86
Pull networking fixes from David Miller: 1) Fix handling of interrupt status in stmmac driver. Just because we have masked the event from generating interrupts, doesn't mean the bit won't still be set in the interrupt status register. From Alexey Brodkin. 2) Fix DMA API debugging splats in gianfar driver, from Arseny Solokha. 3) Fix off-by-one error in __ip6_append_data(), from Vlad Yasevich. 4) cls_flow does not match on icmpv6 codes properly, from Simon Horman. 5) Initial MAC address can be set incorrectly in some scenerios, from Ivan Vecera. 6) Packet header pointer arithmetic fix in ip6_tnl_parse_tlv_end_lim(), from Dan Carpenter. 7) Fix divide by zero in __tcp_select_window(), from Eric Dumazet. 8) Fix crash in iwlwifi when unregistering thermal zone, from Jens Axboe. 9) Check for DMA mapping errors in starfire driver, from Alexey Khoroshilov. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (31 commits) tcp: fix 0 divide in __tcp_select_window() ipv6: pointer math error in ip6_tnl_parse_tlv_enc_lim() net: fix ndo_features_check/ndo_fix_features comment ordering net/sched: matchall: Fix configuration race be2net: fix initial MAC setting ipv6: fix flow labels when the traffic class is non-0 net: thunderx: avoid dereferencing xcv when NULL net/sched: cls_flower: Correct matching on ICMPv6 code ipv6: Paritially checksum full MTU frames net/mlx4_core: Avoid command timeouts during VF driver device shutdown gianfar: synchronize DMA API usage by free_skb_rx_queue w/ gfar_new_page net: ethtool: add support for 2500BaseT and 5000BaseT link modes can: bcm: fix hrtimer/tasklet termination in bcm op removal net: adaptec: starfire: add checks for dma mapping errors net: phy: micrel: KSZ8795 do not set SUPPORTED_[Asym_]Pause can: Fix kernel panic at security_sock_rcv_skb net: macb: Fix 64 bit addressing support for GEM stmmac: Discard masked flags in interrupt status register net/mlx5e: Check ets capability before ets query FW command net/mlx5e: Fix update of hash function/key via ethtool ...
2017-02-01net/sched: act_psample: Remove unnecessary ASSERT_RTNLYotam Gigi1-1/+0
The ASSERT_RTNL is not necessary in the init function, as it does not touch any rtnl protected structures, as opposed to the mirred action which does have to hold a net device. Reported-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01net/sched: act_sample: Fix error path in initYotam Gigi1-1/+4
Fix error path of in sample init, by releasing the tc hash in case of failure in psample_group creation. Fixes: 5c5670fae430 ("net/sched: Introduce sample tc action") Reported-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01tcp: fix 0 divide in __tcp_select_window()Eric Dumazet1-2/+4
syszkaller fuzzer was able to trigger a divide by zero, when TCP window scaling is not enabled. SO_RCVBUF can be used not only to increase sk_rcvbuf, also to decrease it below current receive buffers utilization. If mss is negative or 0, just return a zero TCP window. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01ipv6: pointer math error in ip6_tnl_parse_tlv_enc_lim()Dan Carpenter1-1/+1
Casting is a high precedence operation but "off" and "i" are in terms of bytes so we need to have some parenthesis here. Fixes: fbfa743a9d2a ("ipv6: fix ip6_tnl_parse_tlv_enc_lim()") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01net: ipv6: add NLM_F_APPEND in notifications when applicableDavid Ahern1-0/+3
IPv6 does not set the NLM_F_APPEND flag in notifications to signal that a NEWROUTE is an append versus a new route or a replaced one. Add the flag if the request has it. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.