aboutsummaryrefslogtreecommitdiffstats
path: root/samples (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2018-03-26kconfig: detect recursive inclusion earlierMasahiro Yamada1-6/+8
Currently, the recursive inclusion is not detected when the offending file is about to be included; it is detected the offending file is about to include the *next* file. This is because the detection loop does not involve the file being included. Do this check against the file that is about to be included so that the recursive inclusion is detected before unneeded parsing happens. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-26kconfig: remove duplicated file name and lineno of recursive inclusionMasahiro Yamada2-10/+10
As in the unit test, the error message for the recursive inclusion looks like this: Kconfig.inc1:4: recursive inclusion detected. Inclusion path: current file : 'Kconfig.inc1' included from: 'Kconfig.inc3:1' included from: 'Kconfig.inc2:3' included from: 'Kconfig.inc1:4' The 'Kconfig.inc1:4' is duplicated in the first and last lines. Also, the single quotes do not help readability. Change the message like follows: Recursive inclusion detected. Inclusion path: current file : Kconfig.inc1 included from: Kconfig.inc3:1 included from: Kconfig.inc2:3 included from: Kconfig.inc1:4 Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-26kconfig: do not include both curses.h and ncurses.h for nconfigMasahiro Yamada1-3/+1
nconf.h includes <curses.h> and "ncurses.h", but it does not need to include both. Generally, it should fall back to curses.h only when ncurses.h is not found. But, looks like it has never happened; these includes have been here for many years since commit 692d97c380c6 ("kconfig: new configuration interface (nconfig)"), and nobody has complained about hard-coding of ncurses.h . Let's simply drop the curses.h inclusion. I replaced "ncurses.h" with <ncurses.h> since it is not a local file. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-26kconfig: make unmet dependency warnings readableMasahiro Yamada3-55/+23
Currently, the unmet dependency warnings end up with endlessly long expressions, most of which are false positives. Here is test code to demonstrate how it currently works. [Test Case] config DEP1 def_bool y config DEP2 bool "DEP2" config A bool "A" select E config B bool "B" depends on DEP2 select E config C bool "C" depends on DEP1 && DEP2 select E config D def_bool n select E config E bool depends on DEP1 && DEP2 [Result] $ make config scripts/kconfig/conf --oldaskconfig Kconfig * * Linux Kernel Configuration * DEP2 (DEP2) [N/y/?] (NEW) n A (A) [N/y/?] (NEW) y warning: (A && B && D) selects E which has unmet direct dependencies (DEP1 && DEP2) Here, I see some points to be improved. First, '(A || B || D)' would make more sense than '(A && B && D)'. I am not sure if this is intentional, but expr_simplify_unmet_dep() turns OR expressions into AND, like follows: case E_OR: return expr_alloc_and( Second, we see false positives. 'A' is a real unmet dependency. 'B' is false positive because 'DEP1' is fixed to 'y', and 'B' depends on 'DEP2'. 'C' was correctly dropped by expr_simplify_unmet_dep(). 'D' is also false positive because it has no chance to be enabled. Current expr_simplify_unmet_dep() cannot avoid those false positives. After all, I decided to use the same helpers as used for printing reverse dependencies in the help. With this commit, unreadable warnings (most of the reported symbols are false positives) in the real world: $ make ARCH=score allyesconfig scripts/kconfig/conf --allyesconfig Kconfig warning: (HWSPINLOCK_QCOM && AHCI_MTK && STMMAC_PLATFORM && DWMAC_IPQ806X && DWMAC_LPC18XX && DWMAC_OXNAS && DWMAC_ROCKCHIP && DWMAC_SOCFPGA && DWMAC_STI && TI_CPSW && PINCTRL_GEMINI && PINCTRL_OXNAS && PINCTRL_ROCKCHIP && PINCTRL_DOVE && PINCTRL_ARMADA_37XX && PINCTRL_STM32 && S3C2410_WATCHDOG && VIDEO_OMAP3 && VIDEO_S5P_FIMC && USB_XHCI_MTK && RTC_DRV_AT91SAM9 && LPC18XX_DMAMUX && VIDEO_OMAP4 && COMMON_CLK_GEMINI && COMMON_CLK_ASPEED && COMMON_CLK_NXP && COMMON_CLK_OXNAS && COMMON_CLK_BOSTON && QCOM_ADSP_PIL && QCOM_Q6V5_PIL && QCOM_GSBI && ATMEL_EBI && ST_IRQCHIP && RESET_IMX7 && PHY_HI6220_USB && PHY_RALINK_USB && PHY_ROCKCHIP_PCIE && PHY_DA8XX_USB) selects MFD_SYSCON which has unmet direct dependencies (HAS_IOMEM) warning: (PINCTRL_AT91 && PINCTRL_AT91PIO4 && PINCTRL_OXNAS && PINCTRL_PISTACHIO && PINCTRL_PIC32 && PINCTRL_MESON && PINCTRL_NOMADIK && PINCTRL_MTK && PINCTRL_MT7622 && GPIO_TB10X) selects OF_GPIO which has unmet direct dependencies (GPIOLIB && OF && HAS_IOMEM) warning: (FAULT_INJECTION_STACKTRACE_FILTER && LATENCYTOP && LOCKDEP) selects FRAME_POINTER which has unmet direct dependencies (DEBUG_KERNEL && (CRIS || M68K || FRV || UML || SUPERH || BLACKFIN || MN10300 || METAG) || ARCH_WANT_FRAME_POINTERS) will be turned into: $ make ARCH=score allyesconfig scripts/kconfig/conf --allyesconfig Kconfig WARNING: unmet direct dependencies detected for MFD_SYSCON Depends on [n]: HAS_IOMEM [=n] Selected by [y]: - PINCTRL_STM32 [=y] && PINCTRL [=y] && (ARCH_STM32 || COMPILE_TEST [=y]) && OF [=y] - RTC_DRV_AT91SAM9 [=y] && RTC_CLASS [=y] && (ARCH_AT91 || COMPILE_TEST [=y]) - RESET_IMX7 [=y] && RESET_CONTROLLER [=y] - PHY_HI6220_USB [=y] && (ARCH_HISI && ARM64 || COMPILE_TEST [=y]) - PHY_RALINK_USB [=y] && (RALINK || COMPILE_TEST [=y]) - PHY_ROCKCHIP_PCIE [=y] && (ARCH_ROCKCHIP && OF [=y] || COMPILE_TEST [=y]) WARNING: unmet direct dependencies detected for OF_GPIO Depends on [n]: GPIOLIB [=y] && OF [=y] && HAS_IOMEM [=n] Selected by [y]: - PINCTRL_MTK [=y] && PINCTRL [=y] && (ARCH_MEDIATEK || COMPILE_TEST [=y]) && OF [=y] - PINCTRL_MT7622 [=y] && PINCTRL [=y] && (ARCH_MEDIATEK || COMPILE_TEST [=y]) && OF [=y] && (ARM64 || COMPILE_TEST [=y]) WARNING: unmet direct dependencies detected for FRAME_POINTER Depends on [n]: DEBUG_KERNEL [=y] && (CRIS || M68K || FRV || UML || SUPERH || BLACKFIN || MN10300 || METAG) || ARCH_WANT_FRAME_POINTERS [=n] Selected by [y]: - LATENCYTOP [=y] && DEBUG_KERNEL [=y] && STACKTRACE_SUPPORT [=y] && PROC_FS [=y] && !MIPS && !PPC && !S390 && !MICROBLAZE && !ARM_UNWIND && !ARC && !X86 Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
2018-03-26kconfig: warn unmet direct dependency of tristate symbols selected by yMasahiro Yamada1-2/+2
Commit 246cf9c26bf1 ("kbuild: Warn on selecting symbols with unmet direct dependencies") forcibly promoted ->dir_dep.tri to yes from mod. So, the unmet direct dependencies of tristate symbols are not reported. [Test Case] config MODULES def_bool y option modules config A def_bool y select B config B tristate "B" depends on m This causes unmet dependency because 'B' is forced 'y' ignoring 'depends on m'. This should be warned. On the other hand, the following case ('B' is bool) should not be warned, so 'depends on m' for bool symbols should be naturally treated as 'depends on y'. [Test Case2 (not unmet dependency)] config MODULES def_bool y option modules config A def_bool y select B config B bool "B" depends on m Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-26kconfig: tests: test if recursive inclusion is detectedMasahiro Yamada6-0/+24
If recursive inclusion is detected, it should fail with error messages. Test this. This also tests the line numbers in the error message, fixed by commit 5ae6fcc4bb82 ("kconfig: fix line number in recursive inclusion error message"). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-26kconfig: tests: test if recursive dependencies are detectedMasahiro Yamada3-0/+101
Recursive dependency should be detected and warned. Test this. This indirectly tests the line number increments. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-26kconfig: tests: test randconfig for choice in choiceMasahiro Yamada5-0/+60
Commit 3b9a19e08960 ("kconfig: loop as long as we changed some symbols in randconfig") fixed randconfig where a choice contains a sub-choice. Prior to that commit, the sub-choice values were not set. I am not sure whether this is an intended feature or just something people discovered works, but it is used in the real world; drivers/usb/gadget/legacy/Kconfig is source'd in a choice context, then creates a sub-choice in it. For the test case in this commit, there are 3 possible results. Case 1: CONFIG_A=y # CONFIG_B is not set Case 2: # CONFIG_A is not set CONFIG_B=y CONFIG_C=y # CONFIG_D is not set Case 3: # CONFIG_A is not set CONFIG_B=y # CONFIG_C is not set CONFIG_D=y CONFIG_E=y So, this test iterates several times, and checks if the result is either of the three. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-26kconfig: tests: test defconfig when two choices interactMasahiro Yamada4-0/+42
Commit fbe98bb9ed3d ("kconfig: Fix defconfig when one choice menu selects options that another choice menu depends on") fixed defconfig when two choices interact (i.e. calculating the visibility of a choice requires to calculate another choice). The test code in that commit log was based on the real world example, and complicated. So, I shrunk it down to the following: defconfig.choice: ---8<--- CONFIG_CHOICE_VAL0=y ---8<--- ---8<--- config MODULES def_bool y option modules choice prompt "Choice" config CHOICE_VAL0 tristate "Choice 0" config CHOICE_VAL1 tristate "Choice 1" endchoice choice prompt "Another choice" depends on CHOICE_VAL0 config DUMMY bool "dummy" endchoice ---8<--- Prior to commit fbe98bb9ed3d, $ scripts/kconfig/conf --defconfig=defconfig.choice Kconfig.choice resulted in: CONFIG_MODULES=y CONFIG_CHOICE_VAL0=m # CONFIG_CHOICE_VAL1 is not set CONFIG_DUMMY=y where the expected result would be: CONFIG_MODULES=y CONFIG_CHOICE_VAL0=y # CONFIG_CHOICE_VAL1 is not set CONFIG_DUMMY=y Roughly, this weird behavior happened like this: Symbols are calculated a couple of times. First, all symbols are calculated in conf_read(). The first 'choice' is evaluated to 'y' due to the SYMBOL_DEF_USER flag, but sym_calc_choice() clears it unless all of its choice values are explicitly set by the user. conf_set_all_new_symbols() clears all SYMBOL_VALID flags. Then, only choices are calculated. Here, the SYMBOL_DEF_USER for the first choice has been forgotten, so it is evaluated to 'm'. set_all_choice_values() sets SYMBOL_DEF_USER again to choice symbols. When calculating the second choice, due to 'depends on CHOICE_VAL0', it triggers the calculation of CHOICE_VAL0. As a result, SYMBOL_VALID is set for CHOICE_VAL0. Symbols except choices get the final chance of re-calculation in conf_write(). In a normal case, CHOICE_VAL0 would be re-calculated, then the first choice would be indirectly re-calculated with the SYMBOL_DEF_USER which has been recalled by set_all_choice_values(), which would be evaluated to 'y'. But, in this case, CHOICE_VAL0 has already been marked as SYMBOL_VALID, so this re-calculation does not happen. Then, =m from the conf_set_all_new_symbols() phase is written out to the .config file. Add a unit test for this naive case. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-26kconfig: tests: check visibility of tristate choice values in y choiceMasahiro Yamada5-0/+43
If tristate choice values depend on symbols set to 'm', they should be hidden when the choice containing them is changed from 'm' to 'y' (i.e. exclusive choice). This issue was fixed by commit fa64e5f6a35e ("kconfig/symbol.c: handle choice_values that depend on 'm' symbols"). Add a test case to avoid regression. For the input in this unit test, there is a room for argument if "# CONFIG_CHOICE1 is not set" should be written to the .config file. After commit fa64e5f6a35e, this line was written to the .config file. With commit cb67ab2cd2b8 ("kconfig: do not write choice values when their dependency becomes n"), it is not written now. In this test, "# CONFIG_CHOICE1 is not set" is don't care. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-26kconfig: tests: check unneeded "is not set" with unmet dependencyMasahiro Yamada4-0/+39
Commit cb67ab2cd2b8 ("kconfig: do not write choice values when their dependency becomes n") fixed a problem where "# CONFIG_... is not set" for choice values are wrongly written into the .config file when they are once visible, then become invisible later. Add a test for this naive case. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-26kconfig: tests: test if new symbols in choice are askedMasahiro Yamada4-0/+64
If new choice values are added with new dependency, and they become visible during user configuration, oldconfig should recognize them as (NEW), and ask the user for choice. This issue was fixed by commit 5d09598d488f ("kconfig: fix new choices being skipped upon config update"). This is a subtle corner case. Add a test case to avoid breakage. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-26kconfig: tests: test automatic submenu creationMasahiro Yamada3-0/+72
If a symbols has dependency on the preceding symbol, the menu entry should become the submenu of the preceding one, and displayed with deeper indentation. This is done by restructuring the menu tree in menu_finalize(). It is a bit complicated computation, so let's add a test case. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-26kconfig: tests: add basic choice testsMasahiro Yamada9-0/+149
The calculation of 'choice' is a bit complicated part in Kconfig. The behavior of 'y' choice is intuitive. If choice values are tristate, the choice can be 'm' where each value can be enabled independently. Also, if a choice is marked as 'optional', the whole choice can be invisible. Test basic functionality of choice. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-26kconfig: tests: add framework for Kconfig unit testingMasahiro Yamada3-0/+306
Many parts in Kconfig are so cryptic and need refactoring. However, its complexity prevents us from moving forward. There are several naive corner cases where it is difficult to notice breakage. If those are covered by unit tests, we will be able to touch the code with more confidence. Here is a simple test framework based on pytest. The conftest.py provides a fixture useful to run commands such as 'oldaskconfig' etc. and to compare the resulted .config, stdout, stderr with expectations. How to add test cases? ---------------------- For each test case, you should create a subdirectory under scripts/kconfig/tests/ (so test cases are separated from each other). Every test case directory should contain the following files: - __init__.py: describes test functions - Kconfig: the top level Kconfig file for the test To do a useful job, test cases generally need additional data like input .config and information about expected results. How to run tests? ----------------- You need python3 and pytest. Then, run "make testconfig". O= option is supported. If V=1 is given, detailed logs captured during tests are displayed. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-26kbuild: add PYTHON2 and PYTHON3 variablesMasahiro Yamada1-1/+3
The variable 'PYTHON' allows users to specify a proper executable name in case the default 'python' does not work. However, this does not address the case where both Python 2.x and 3.x scripts are used in one source tree. PEP 394 (https://www.python.org/dev/peps/pep-0394/) provides a convention for Python scripts portability. Here is a quotation: In order to tolerate differences across platforms, all new code that needs to invoke the Python interpreter should not specify 'python', but rather should specify either 'python2' or 'python3'. This distinction should be made in shebangs, when invoking from a shell script, when invoking via the system() call, or when invoking in any other context. One exception to this is scripts that are deliberately written to be source compatible with both Python 2.x and 3.x. Such scripts may continue to use python on their shebang line without affecting their portability. To meet this requirement, this commit adds new variables 'PYTHON2' and 'PYTHON3'. arch/ia64/scripts/unwcheck.py is the only script that has ever used $(PYTHON). Recent commit bd5edbe67794 ("ia64: convert unwcheck.py to python3") converted it to be compatible with both Python 2.x and 3.x, so this is the exceptional case where the use of 'python' is allowed. So, I did not touch arch/ia64/Makefile. tools/perf/Makefile.config sets PYTHON and PYTHON2 by itself, so it is not affected by this commit. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-26kconfig: remove redundant streamline_config.pl prerequisiteUlf Magnusson1-4/+4
The local{yes,mod}config targets currently have streamline_config.pl as a prerequisite. This is redundant, because streamline_config.pl is a checked-in file with no prerequisites. Remove the prerequisite and reference streamline_config.pl directly in the recipe of the rule instead. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-26kconfig: rename silentoldconfig to syncconfigMasahiro Yamada5-16/+23
As commit cedd55d49dee ("kconfig: Remove silentoldconfig from help and docs; fix kconfig/conf's help") mentioned, 'silentoldconfig' is a historical misnomer. That commit removed it from help and docs since it is an internal interface. If so, it should be allowed to rename it to something more intuitive. 'syncconfig' is the one I came up with because it updates the .config if necessary, then synchronize include/generated/autoconf.h and include/config/* with it. You should not manually invoke 'silentoldcofig'. Display warning if used in case existing scripts are doing wrong. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-26kconfig: invoke oldconfig instead of silentoldconfig from local*configMasahiro Yamada1-2/+2
The purpose of local{yes,mod}config is to arrange the .config file based on actually loaded modules. It is unnecessary to update include/generated/autoconf.h and include/config/* stuff here. They will be updated as needed during the build. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-26kconfig: hide irrelevant sub-menus for oldconfigMasahiro Yamada1-3/+6
Historically, "make oldconfig" has changed its behavior several times, quieter or louder. (I attached the history below.) Currently, it is not as quiet as it should be. This commit addresses it. Test Case --------- ---------------------------(Kconfig)---------------------------- menu "menu" config FOO bool "foo" menu "sub menu" config BAR bool "bar" endmenu endmenu menu "sibling menu" config BAZ bool "baz" endmenu ---------------------------------------------------------------- ---------------------------(.config)---------------------------- CONFIG_BAR=y CONFIG_BAZ=y ---------------------------------------------------------------- With the Kconfig and .config above, "make silentoldconfig" and "make oldconfig" work differently, like follows: $ make silentoldconfig scripts/kconfig/conf --silentoldconfig Kconfig * * Restart config... * * * menu * foo (FOO) [N/y/?] (NEW) y # # configuration written to .config # $ make oldconfig scripts/kconfig/conf --oldconfig Kconfig * * Restart config... * * * menu * foo (FOO) [N/y/?] (NEW) y * * sub menu * bar (BAR) [Y/n/?] y # # configuration written to .config # Both hide "sibling node" since it is irrelevant. The difference is that silentoldconfig hides "sub menu" whereas oldconfig does not. The behavior of silentoldconfig is preferred since the "sub menu" does not contain any new symbol. The root cause is in conf(). There are three input modes that can call conf(); oldaskconfig, oldconfig, and silentoldconfig. Everytime conf() encounters a menu entry, it calls check_conf() to check if it contains new symbols. If no new symbol is found, the menu is just skipped. Currently, this happens only when input_mode == silentoldconfig. The oldaskconfig enters into the check_conf() loop as silentoldconfig, so oldaskconfig works likewise for the second loop or later, but it never happens for oldconfig. So, irrelevant sub-menus are shown for oldconfig. Change the test condition to "input_mode != oldaskconfig". This is false only for the first loop of oldaskconfig; it must ask the user all symbols, so no need to call check_conf(). History of oldconfig -------------------- [0] Originally, "make oldconfig" was as loud as "make config" (It showed the entire .config file) [1] Commit cd9140e1e73a ("kconfig: make oldconfig is now less chatty") made oldconfig quieter, but it was still less quieter than silentoldconfig. (oldconfig did not hide sub-menus) [2] Commit 204c96f60904 ("kconfig: fix silentoldconfig") changed the input_mode of oldconfig to "ask_silent" from "ask_new". So, oldconfig really became as quiet as silentoldconfig. (oldconfig hided irrelevant sub-menus) [3] Commit 4062f1a4c030 ("kconfig: use long options in conf") made oldconfig as loud as [0] due to misconversion. [4] Commit 14828349719a ("kconfig: fix make oldconfig") addressed the misconversion of [3], but it made oldconfig quieter only to the same level as [1], not [2]. This commit is restoring the behavior of [2]. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-26kconfig: remove redundant input_mode test for check_conf() loopMasahiro Yamada1-1/+1
check_conf() never increments conf_cnt for listnewconfig, so conf_cnt is always zero. In other words, conf_cnt is not zero, "input_mode != listnewconfig" is met. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-26kconfig: remove unneeded input_mode test in conf()Masahiro Yamada1-3/+1
conf() is never called for listnewconfig / olddefconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-26kconfig: do not call check_conf() for olddefconfigMasahiro Yamada1-5/+5
check_conf() traverses the menu tree, but it is completely no-op for olddefconfig because the following if-else block does nothing. if (input_mode == listnewconfig) { ... } else if (input_mode != olddefconfig) { ... } As the help message says, olddefconfig automatically sets new symbols to their default value. There is no room for manual intervention. So, calling check_conf() for olddefconfig is odd in the first place. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-26kconfig: only write '# CONFIG_FOO is not set' for visible symbolsUlf Magnusson1-1/+2
=== Background === - Visible n-valued bool/tristate symbols generate a '# CONFIG_FOO is not set' line in the .config file. The idea is to remember the user selection without having to set a Makefile variable. Having n correspond to the variable being undefined in the Makefiles makes for easy CONFIG_* tests. - Invisible n-valued bool/tristate symbols normally do not generate a '# CONFIG_FOO is not set' line, because user values from .config files have no effect on invisible symbols anyway. Currently, there is one exception to this rule: Any bool/tristate symbol that gets the value n through a 'default' property generates a '# CONFIG_FOO is not set' line, even if the symbol is invisible. Note that this only applies to explicitly given defaults, and not when the symbol implicitly defaults to n (like bool/tristate symbols without 'default' properties do). This is inconsistent, and seems redundant: - As mentioned, the '# CONFIG_FOO is not set' won't affect the symbol once the .config is read back in. - Even if the symbol is invisible at first but becomes visible later, there shouldn't be any harm in recalculating the default value rather than viewing the '# CONFIG_FOO is not set' as a previous user value of n. === Changes === Change sym_calc_value() to only set SYMBOL_WRITE (write to .config) for non-n-valued 'default' properties. Note that SYMBOL_WRITE is always set for visible symbols regardless of whether they have 'default' properties or not, so this change only affects invisible symbols. This reduces the size of the x86 .config on my system by about 1% (due to removed '# CONFIG_FOO is not set' entries). One side effect of (and the main motivation for) this change is making the following two definitions behave exactly the same: config FOO bool config FOO bool default n With this change, neither of these will generate a '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied). That might make it clearer to people that a bare 'default n' is redundant. This change only affects generated .config files and not autoconf.h: autoconf.h only includes #defines for non-n bool/tristate symbols. === Testing === The following testing was done with the x86 Kconfigs: - .config files generated before and after the change were compared to verify that the only difference is some '# CONFIG_FOO is not set' entries disappearing. A couple of these were inspected manually, and most turned out to be from redundant 'default n/def_bool n' properties. - The generated include/generated/autoconf.h was compared before and after the change and verified to be identical. - As a sanity check, the same modification was done to Kconfiglib. The Kconfiglib test suite was then run to check for any mismatches against the output of the C implementation. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-26kconfig: Print reverse dependencies in groupsEugeniu Rosca3-13/+20
Surprisingly or not, disabling a CONFIG option (which is assumed to be unneeded) may be not so trivial. Especially it is not trivial, when this CONFIG option is selected by a dozen of other configs. Before the moment commit 1ccb27143360 ("kconfig: make "Selected by:" and "Implied by:" readable") popped up in v4.16-rc1, it was an absolute pain to break down the "Selected by" reverse dependency expression in order to identify all those configs which select (IOW *do not allow disabling*) a certain feature (assumed to be not needed). This patch tries to make one step further by putting at users' fingertips the revdep top level OR sub-expressions grouped/clustered by the tristate value they evaluate to. This should allow the users to directly concentrate on and tackle the _active_ reverse dependencies. To give some numbers and quantify the complexity of certain reverse dependencies, assuming commit 617aebe6a97e ("Merge tag 'usercopy-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux"), ARCH=arm64 and vanilla arm64 defconfig, here is the top 10 CONFIG options with the highest amount of top level "||" sub-expressions/tokens that make up the final "Selected by" reverse dependency expression. | Config | All revdep | Active revdep | |-------------------|------------|---------------| | REGMAP_I2C | 212 | 9 | | CRC32 | 167 | 25 | | FW_LOADER | 128 | 5 | | MFD_CORE | 124 | 9 | | FB_CFB_IMAGEBLIT | 114 | 2 | | FB_CFB_COPYAREA | 111 | 2 | | FB_CFB_FILLRECT | 110 | 2 | | SND_PCM | 103 | 2 | | CRYPTO_HASH | 87 | 19 | | WATCHDOG_CORE | 86 | 6 | The story behind the above is that users need to visually review/evaluate 212 expressions which *potentially* select REGMAP_I2C in order to identify the expressions which *actually* select REGMAP_I2C, for a particular ARCH and for a particular defconfig used. To make this experience smoother, change the way reverse dependencies are displayed to the user from [1] to [2]. [1] Old representation of DMA_ENGINE_RAID: Selected by: - AMCC_PPC440SPE_ADMA [=n] && DMADEVICES [=y] && (440SPe || 440SP) - BCM_SBA_RAID [=m] && DMADEVICES [=y] && (ARM64 [=y] || ... - FSL_RAID [=n] && DMADEVICES [=y] && FSL_SOC && ... - INTEL_IOATDMA [=n] && DMADEVICES [=y] && PCI [=y] && X86_64 - MV_XOR [=n] && DMADEVICES [=y] && (PLAT_ORION || ARCH_MVEBU [=y] ... - MV_XOR_V2 [=y] && DMADEVICES [=y] && ARM64 [=y] - XGENE_DMA [=n] && DMADEVICES [=y] && (ARCH_XGENE [=y] || ... - DMATEST [=n] && DMADEVICES [=y] && DMA_ENGINE [=y] [2] New representation of DMA_ENGINE_RAID: Selected by [y]: - MV_XOR_V2 [=y] && DMADEVICES [=y] && ARM64 [=y] Selected by [m]: - BCM_SBA_RAID [=m] && DMADEVICES [=y] && (ARM64 [=y] || ... Selected by [n]: - AMCC_PPC440SPE_ADMA [=n] && DMADEVICES [=y] && (440SPe || ... - FSL_RAID [=n] && DMADEVICES [=y] && FSL_SOC && ... - INTEL_IOATDMA [=n] && DMADEVICES [=y] && PCI [=y] && X86_64 - MV_XOR [=n] && DMADEVICES [=y] && (PLAT_ORION || ARCH_MVEBU [=y] ... - XGENE_DMA [=n] && DMADEVICES [=y] && (ARCH_XGENE [=y] || ... - DMATEST [=n] && DMADEVICES [=y] && DMA_ENGINE [=y] Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: Petr Vorel <pvorel@suse.cz> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-26kconfig: clean-up reverse dependency help implementationMasahiro Yamada2-17/+23
This commit splits out the special E_OR handling ('-' instead of '||') into a dedicated helper expr_print_revdev(). Restore the original expr_print() prior to commit 1ccb27143360 ("kconfig: make "Selected by:" and "Implied by:" readable"). This makes sense because: - We need to chop those expressions only when printing the reverse dependency, and only when E_OR is encountered - Otherwise, it should be printed as before, so fall back to expr_print() This also improves the behavior; for a single line, it was previously displayed in the same line as "Selected by", like this: Selected by: A [=n] && B [=n] This will be displayed in a new line, consistently: Selected by: - A [=n] && B [=n] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Petr Vorel <pvorel@suse.cz>
2018-03-26checkpatch: kconfig: prefer 'help' over '---help---'Ulf Magnusson1-1/+5
IMO, we should discourage '---help---' for new help texts, even in cases where it would be consistent with other help texts in the file. This will help if we ever want to get rid of '---help---' in the future. Also simplify the code to only check for exactly '---help---'. Since commit c2264564df3d ("kconfig: warn of unhandled characters in Kconfig commands"), '---help---' is a proper keyword and can only appear in that form. Prior to that commit, '---help---' working was more of a syntactic quirk. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-26checkpatch: kconfig: check help texts for menuconfig and choiceUlf Magnusson1-2/+11
Currently, only Kconfig symbols are checked for a missing or short help text, and are only checked if they are defined with the 'config' keyword. To make the check more general, extend it to also check help texts for choices and for symbols defined with the 'menuconfig' keyword. This increases the accuracy of the check for symbols that would already have been checked as well, since e.g. a 'menuconfig' symbol after a help text will be recognized as ending the preceding symbol/choice definition. To increase the accuracy of the check further, also recognize 'if', 'endif', 'menu', 'endmenu', 'endchoice', and 'source' as ending a symbol/choice definition. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-26checkpatch: kconfig: recognize more prompts when checking help textsUlf Magnusson1-1/+1
The check for a missing or short help text only considers symbols with a prompt, but doesn't recognize any of the following as a prompt: bool 'foo' tristate 'foo' prompt "foo" prompt 'foo' Make the check recognize those too. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-11Linux 4.16-rc5Linus Torvalds1-1/+1
2018-03-11dmaengine: mv_xor_v2: Fix clock resource by adding a register clockGregory CLEMENT2-6/+25
On the CP110 components which are present on the Armada 7K/8K SoC we need to explicitly enable the clock for the registers. However it is not needed for the AP8xx component, that's why this clock is optional. With this patch both clock have now a name, but in order to be backward compatible, the name of the first clock is not used. It allows to still use this clock with a device tree using the old binding. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-03-09lib/test_kmod.c: fix limit check on number of test devices createdLuis R. Rodriguez1-1/+1
As reported by Dan the parentheses is in the wrong place, and since unlikely() call returns either 0 or 1 it's never less than zero. The second issue is that signed integer overflows like "INT_MAX + 1" are undefined behavior. Since num_test_devs represents the number of devices, we want to stop prior to hitting the max, and not rely on the wrap arround at all. So just cap at num_test_devs + 1, prior to assigning a new device. Link: http://lkml.kernel.org/r/20180224030046.24238-1-mcgrof@kernel.org Fixes: d9c6a72d6fa2 ("kmod: add test driver to stress test the module loader") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-09selftests/vm/run_vmtests: adjust hugetlb size according to nr_cpusLi Zhijian1-8/+17
Fix userfaultfd_hugetlb on hosts which have more than 64 cpus. --------------------------- running userfaultfd_hugetlb --------------------------- invalid MiB Usage: <MiB> <bounces> [FAIL] Via userfaultfd.c we can know, hugetlb_size needs to meet hugetlb_size >= nr_cpus * hugepage_size. hugepage_size is often 2M, so when host cpus > 64, it requires more than 128M. [zhijianx.li@intel.com: update changelog/comments and variable name] Link: http://lkml.kernel.org/r/20180302024356.83359-1-zhijianx.li@intel.com Link: http://lkml.kernel.org/r/20180303125027.81638-1-zhijianx.li@intel.com Link: http://lkml.kernel.org/r/20180302024356.83359-1-zhijianx.li@intel.com Signed-off-by: Li Zhijian <zhijianx.li@intel.com> Cc: Shuah Khan <shuah@kernel.org> Cc: SeongJae Park <sj38.park@gmail.com> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-09mm/page_alloc: fix memmap_init_zone pageblock alignmentDaniel Vacek1-2/+7
Commit b92df1de5d28 ("mm: page_alloc: skip over regions of invalid pfns where possible") introduced a bug where move_freepages() triggers a VM_BUG_ON() on uninitialized page structure due to pageblock alignment. To fix this, simply align the skipped pfns in memmap_init_zone() the same way as in move_freepages_block(). Seen in one of the RHEL reports: crash> log | grep -e BUG -e RIP -e Call.Trace -e move_freepages_block -e rmqueue -e freelist -A1 kernel BUG at mm/page_alloc.c:1389! invalid opcode: 0000 [#1] SMP -- RIP: 0010:[<ffffffff8118833e>] [<ffffffff8118833e>] move_freepages+0x15e/0x160 RSP: 0018:ffff88054d727688 EFLAGS: 00010087 -- Call Trace: [<ffffffff811883b3>] move_freepages_block+0x73/0x80 [<ffffffff81189e63>] __rmqueue+0x263/0x460 [<ffffffff8118c781>] get_page_from_freelist+0x7e1/0x9e0 [<ffffffff8118caf6>] __alloc_pages_nodemask+0x176/0x420 -- RIP [<ffffffff8118833e>] move_freepages+0x15e/0x160 RSP <ffff88054d727688> crash> page_init_bug -v | grep RAM <struct resource 0xffff88067fffd2f8> 1000 - 9bfff System RAM (620.00 KiB) <struct resource 0xffff88067fffd3a0> 100000 - 430bffff System RAM ( 1.05 GiB = 1071.75 MiB = 1097472.00 KiB) <struct resource 0xffff88067fffd410> 4b0c8000 - 4bf9cfff System RAM ( 14.83 MiB = 15188.00 KiB) <struct resource 0xffff88067fffd480> 4bfac000 - 646b1fff System RAM (391.02 MiB = 400408.00 KiB) <struct resource 0xffff88067fffd560> 7b788000 - 7b7fffff System RAM (480.00 KiB) <struct resource 0xffff88067fffd640> 100000000 - 67fffffff System RAM ( 22.00 GiB) crash> page_init_bug | head -6 <struct resource 0xffff88067fffd560> 7b788000 - 7b7fffff System RAM (480.00 KiB) <struct page 0xffffea0001ede200> 1fffff00000000 0 <struct pglist_data 0xffff88047ffd9000> 1 <struct zone 0xffff88047ffd9800> DMA32 4096 1048575 <struct page 0xffffea0001ede200> 505736 505344 <struct page 0xffffea0001ed8000> 505855 <struct page 0xffffea0001edffc0> <struct page 0xffffea0001ed8000> 0 0 <struct pglist_data 0xffff88047ffd9000> 0 <struct zone 0xffff88047ffd9000> DMA 1 4095 <struct page 0xffffea0001edffc0> 1fffff00000400 0 <struct pglist_data 0xffff88047ffd9000> 1 <struct zone 0xffff88047ffd9800> DMA32 4096 1048575 BUG, zones differ! Note that this range follows two not populated sections 68000000-77ffffff in this zone. 7b788000-7b7fffff is the first one after a gap. This makes memmap_init_zone() skip all the pfns up to the beginning of this range. But this range is not pageblock (2M) aligned. In fact no range has to be. crash> kmem -p 77fff000 78000000 7b5ff000 7b600000 7b787000 7b788000 PAGE PHYSICAL MAPPING INDEX CNT FLAGS ffffea0001e00000 78000000 0 0 0 0 ffffea0001ed7fc0 7b5ff000 0 0 0 0 ffffea0001ed8000 7b600000 0 0 0 0 <<<< ffffea0001ede1c0 7b787000 0 0 0 0 ffffea0001ede200 7b788000 0 0 1 1fffff00000000 Top part of page flags should contain nodeid and zonenr, which is not the case for page ffffea0001ed8000 here (<<<<). crash> log | grep -o fffea0001ed[^\ ]* | sort -u fffea0001ed8000 fffea0001eded20 fffea0001edffc0 crash> bt -r | grep -o fffea0001ed[^\ ]* | sort -u fffea0001ed8000 fffea0001eded00 fffea0001eded20 fffea0001edffc0 Initialization of the whole beginning of the section is skipped up to the start of the range due to the commit b92df1de5d28. Now any code calling move_freepages_block() (like reusing the page from a freelist as in this example) with a page from the beginning of the range will get the page rounded down to start_page ffffea0001ed8000 and passed to move_freepages() which crashes on assertion getting wrong zonenr. > VM_BUG_ON(page_zone(start_page) != page_zone(end_page)); Note, page_zone() derives the zone from page flags here. From similar machine before commit b92df1de5d28: crash> kmem -p 77fff000 78000000 7b5ff000 7b600000 7b7fe000 7b7ff000 PAGE PHYSICAL MAPPING INDEX CNT FLAGS fffff73941e00000 78000000 0 0 1 1fffff00000000 fffff73941ed7fc0 7b5ff000 0 0 1 1fffff00000000 fffff73941ed8000 7b600000 0 0 1 1fffff00000000 fffff73941edff80 7b7fe000 0 0 1 1fffff00000000 fffff73941edffc0 7b7ff000 ffff8e67e04d3ae0 ad84 1 1fffff00020068 uptodate,lru,active,mappedtodisk All the pages since the beginning of the section are initialized. move_freepages()' not gonna blow up. The same machine with this fix applied: crash> kmem -p 77fff000 78000000 7b5ff000 7b600000 7b7fe000 7b7ff000 PAGE PHYSICAL MAPPING INDEX CNT FLAGS ffffea0001e00000 78000000 0 0 0 0 ffffea0001e00000 7b5ff000 0 0 0 0 ffffea0001ed8000 7b600000 0 0 1 1fffff00000000 ffffea0001edff80 7b7fe000 0 0 1 1fffff00000000 ffffea0001edffc0 7b7ff000 ffff88017fb13720 8 2 1fffff00020068 uptodate,lru,active,mappedtodisk At least the bare minimum of pages is initialized preventing the crash as well. Customers started to report this as soon as 7.4 (where b92df1de5d28 was merged in RHEL) was released. I remember reports from September/October-ish times. It's not easily reproduced and happens on a handful of machines only. I guess that's why. But that does not make it less serious, I think. Though there actually is a report here: https://bugzilla.kernel.org/show_bug.cgi?id=196443 And there are reports for Fedora from July: https://bugzilla.redhat.com/show_bug.cgi?id=1473242 and CentOS: https://bugs.centos.org/view.php?id=13964 and we internally track several dozens reports for RHEL bug https://bugzilla.redhat.com/show_bug.cgi?id=1525121 Link: http://lkml.kernel.org/r/0485727b2e82da7efbce5f6ba42524b429d0391a.1520011945.git.neelx@redhat.com Fixes: b92df1de5d28 ("mm: page_alloc: skip over regions of invalid pfns where possible") Signed-off-by: Daniel Vacek <neelx@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-09mm/memblock.c: hardcode the end_pfn being -1Daniel Vacek1-5/+5
This is just a cleanup. It aids handling the special end case in the next commit. [akpm@linux-foundation.org: make it work against current -linus, not against -mm] [akpm@linux-foundation.org: make it work against current -linus, not against -mm some more] Link: http://lkml.kernel.org/r/1ca478d4269125a99bcfb1ca04d7b88ac1aee924.1520011944.git.neelx@redhat.com Signed-off-by: Daniel Vacek <neelx@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-09mm/gup.c: teach get_user_pages_unlocked to handle FOLL_NOWAITAndrea Arcangeli1-2/+5
KVM is hanging during postcopy live migration with userfaultfd because get_user_pages_unlocked is not capable to handle FOLL_NOWAIT. Earlier FOLL_NOWAIT was only ever passed to get_user_pages. Specifically faultin_page (the callee of get_user_pages_unlocked caller) doesn't know that if FAULT_FLAG_RETRY_NOWAIT was set in the page fault flags, when VM_FAULT_RETRY is returned, the mmap_sem wasn't actually released (even if nonblocking is not NULL). So it sets *nonblocking to zero and the caller won't release the mmap_sem thinking it was already released, but it wasn't because of FOLL_NOWAIT. Link: http://lkml.kernel.org/r/20180302174343.5421-2-aarcange@redhat.com Fixes: ce53053ce378c ("kvm: switch get_user_page_nowait() to get_user_pages_unlocked()") Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Tested-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-09lib/bug.c: exclude non-BUG/WARN exceptions from report_bug()Kees Cook1-0/+2
Commit b8347c219649 ("x86/debug: Handle warnings before the notifier chain, to fix KGDB crash") changed the ordering of fixups, and did not take into account the case of x86 processing non-WARN() and non-BUG() exceptions. This would lead to output of a false BUG line with no other information. In the case of a refcount exception, it would be immediately followed by the refcount WARN(), producing very strange double-"cut here": lkdtm: attempting bad refcount_inc() overflow ------------[ cut here ]------------ Kernel BUG at 0000000065f29de5 [verbose debug info unavailable] ------------[ cut here ]------------ refcount_t overflow at lkdtm_REFCOUNT_INC_OVERFLOW+0x6b/0x90 in cat[3065], uid/euid: 0/0 WARNING: CPU: 0 PID: 3065 at kernel/panic.c:657 refcount_error_report+0x9a/0xa4 ... In the prior ordering, exceptions were searched first: do_trap_no_signal(struct task_struct *tsk, int trapnr, char *str, ... if (fixup_exception(regs, trapnr)) return 0; - if (fixup_bug(regs, trapnr)) - return 0; - As a result, fixup_bugs()'s is_valid_bugaddr() didn't take into account needing to search the exception list first, since that had already happened. So, instead of searching the exception list twice (once in is_valid_bugaddr() and then again in fixup_exception()), just add a simple sanity check to report_bug() that will immediately bail out if a BUG() (or WARN()) entry is not found. Link: http://lkml.kernel.org/r/20180301225934.GA34350@beast Fixes: b8347c219649 ("x86/debug: Handle warnings before the notifier chain, to fix KGDB crash") Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Richard Weinberger <richard.weinberger@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-09bug: use %pB in BUG and stack protector failureKees Cook2-2/+2
The BUG and stack protector reports were still using a raw %p. This changes it to %pB for more meaningful output. Link: http://lkml.kernel.org/r/20180301225704.GA34198@beast Fixes: ad67b74d2469 ("printk: hash addresses printed with %p") Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Richard Weinberger <richard.weinberger@gmail.com>, Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-09hugetlb: fix surplus pages accountingMichal Hocko1-1/+1
Dan Rue has noticed that libhugetlbfs test suite fails counter test: # mount_point="/mnt/hugetlb/" # echo 200 > /proc/sys/vm/nr_hugepages # mkdir -p "${mount_point}" # mount -t hugetlbfs hugetlbfs "${mount_point}" # export LD_LIBRARY_PATH=/root/libhugetlbfs/libhugetlbfs-2.20/obj64 # /root/libhugetlbfs/libhugetlbfs-2.20/tests/obj64/counters Starting testcase "/root/libhugetlbfs/libhugetlbfs-2.20/tests/obj64/counters", pid 3319 Base pool size: 0 Clean... FAIL Line 326: Bad HugePages_Total: expected 0, actual 1 The bug was bisected to 0c397daea1d4 ("mm, hugetlb: further simplify hugetlb allocation API"). The reason is that alloc_surplus_huge_page() misaccounts per node surplus pages. We should increase surplus_huge_pages_node rather than nr_huge_pages_node which is already handled by alloc_fresh_huge_page. Link: http://lkml.kernel.org/r/20180221191439.GM2231@dhcp22.suse.cz Fixes: 0c397daea1d4 ("mm, hugetlb: further simplify hugetlb allocation API") Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Dan Rue <dan.rue@linaro.org> Tested-by: Dan Rue <dan.rue@linaro.org> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-09RDMA/mlx5: Fix integer overflow while resizing CQLeon Romanovsky1-1/+6
The user can provide very large cqe_size which will cause to integer overflow as it can be seen in the following UBSAN warning: ======================================================================= UBSAN: Undefined behaviour in drivers/infiniband/hw/mlx5/cq.c:1192:53 signed integer overflow: 64870 * 65536 cannot be represented in type 'int' CPU: 0 PID: 267 Comm: syzkaller605279 Not tainted 4.15.0+ #90 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 Call Trace: dump_stack+0xde/0x164 ? dma_virt_map_sg+0x22c/0x22c ubsan_epilogue+0xe/0x81 handle_overflow+0x1f3/0x251 ? __ubsan_handle_negate_overflow+0x19b/0x19b ? lock_acquire+0x440/0x440 mlx5_ib_resize_cq+0x17e7/0x1e40 ? cyc2ns_read_end+0x10/0x10 ? native_read_msr_safe+0x6c/0x9b ? cyc2ns_read_end+0x10/0x10 ? mlx5_ib_modify_cq+0x220/0x220 ? sched_clock_cpu+0x18/0x200 ? lookup_get_idr_uobject+0x200/0x200 ? rdma_lookup_get_uobject+0x145/0x2f0 ib_uverbs_resize_cq+0x207/0x3e0 ? ib_uverbs_ex_create_cq+0x250/0x250 ib_uverbs_write+0x7f9/0xef0 ? cyc2ns_read_end+0x10/0x10 ? print_irqtrace_events+0x280/0x280 ? ib_uverbs_ex_create_cq+0x250/0x250 ? uverbs_devnode+0x110/0x110 ? sched_clock_cpu+0x18/0x200 ? do_raw_spin_trylock+0x100/0x100 ? __lru_cache_add+0x16e/0x290 __vfs_write+0x10d/0x700 ? uverbs_devnode+0x110/0x110 ? kernel_read+0x170/0x170 ? sched_clock_cpu+0x18/0x200 ? security_file_permission+0x93/0x260 vfs_write+0x1b0/0x550 SyS_write+0xc7/0x1a0 ? SyS_read+0x1a0/0x1a0 ? trace_hardirqs_on_thunk+0x1a/0x1c entry_SYSCALL_64_fastpath+0x1e/0x8b RIP: 0033:0x433549 RSP: 002b:00007ffe63bd1ea8 EFLAGS: 00000217 ======================================================================= Cc: syzkaller <syzkaller@googlegroups.com> Cc: <stable@vger.kernel.org> # 3.13 Fixes: bde51583f49b ("IB/mlx5: Add support for resize CQ") Reported-by: Noa Osherovich <noaos@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-09Revert "RDMA/mlx5: Fix integer overflow while resizing CQ"Doug Ledford1-6/+1
The original commit of this patch has a munged log message that is missing several of the tags the original author intended to be on the patch. This was due to patchworks misinterpreting a cut-n-paste separator line as an end of message line and munging the mbox that was used to import the patch: https://patchwork.kernel.org/patch/10264089/ The original patch will be reapplied with a fixed commit message so the proper tags are applied. This reverts commit aa0de36a40f446f5a21a7c1e677b98206e242edb. Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-09arm64: Relax ARM_SMCCC_ARCH_WORKAROUND_1 discoveryMarc Zyngier1-2/+2
A recent update to the ARM SMCCC ARCH_WORKAROUND_1 specification allows firmware to return a non zero, positive value to describe that although the mitigation is implemented at the higher exception level, the CPU on which the call is made is not affected. Let's relax the check on the return value from ARCH_WORKAROUND_1 so that we only error out if the returned value is negative. Fixes: b092201e0020 ("arm64: Add ARM_SMCCC_ARCH_WORKAROUND_1 BP hardening support") Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-03-09Documentation/sphinx: Fix Directive import errorMatthew Wilcox1-2/+1
Sphinx 1.7 removed sphinx.util.compat.Directive so people who have upgraded cannot build the documentation. Switch to docutils.parsers.rst.Directive which has been available since docutils 0.5 released in 2009. Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1083694 Co-developed-by: Takashi Iwai <tiwai@suse.de> Acked-by: Jani Nikula <jani.nikula@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-03-09platform/x86: dell-smbios: Resolve dependency error on DCDBASDarren Hart (VMware)1-0/+6
When the DELL_SMBIOS_SMM backend is enabled, the DELL_SMBIOS symbol depends on DELL_DCDBAS, and we must avoid the situation where DELL_SMBIOS=y and DCDBAS=m. Adding the conditional dependency to DELL_SMBIOS such as: depends !DELL_SMBIOS_SMM || (DCDBAS || DCDBAS=n) results in the Kconfig tooling complaining about a circular dependency, although it appears to work in practice. Avoid the errors by simplifying the dependency and forcing DELL_SMBIOS to be <= DCDBAS if DCDBAS is enabled (thanks to Greg KH for the suggestion). Cc: Mario.Limonciello@dell.com Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2018-03-09platform/x86: Allow for SMBIOS backend defaultsDarren Hart (VMware)1-2/+4
Avoid accidental configurations by setting default y for DELL_SMBIOS backends. Avoid this impacting the default build size, by making them dependent on DELL_SMBIOS, so they only appear when DELL_SMBIOS is manually selected, or by DELL_LAPTOP or DELL_WMI. While DELL_SMBIOS does have a prompt, it does not have any dependencies. Keeping DELL_SMBIOS visible, despite being "select"ed by DELL_LAPTOP and DELL_WMI, is a deliberate choice to provide context for the WMI and SMM backends, which would otherwise appear to float without context within the menu. Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2018-03-09platform/x86: dell-smbios: Link all dell-smbios-* modules togetherMario Limonciello6-33/+66
Some race conditions were raised due to dell-smbios and its backends not being ready by the time that a consumer would call one of the exported methods. To avoid this problem, guarantee that all initialization has been done by linking them all together and running init for them all. As part of this change the Kconfig needs to be adjusted so that CONFIG_DELL_SMBIOS_SMM and CONFIG_DELL_SMBIOS_WMI are boolean rather than modules. CONFIG_DELL_SMBIOS is a visually selectable option again and both CONFIG_DELL_SMBIOS_WMI and CONFIG_DELL_SMBIOS_SMM are optional. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> [dvhart: Update prompt and help text for DELL_SMBIOS_* backends] Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2018-03-09platform/x86: dell-smbios: Rename dell-smbios source to dell-smbios-baseMario Limonciello2-0/+1
This is being done to faciliate a later change to link all the dell-smbios drivers together. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2018-03-09platform/x86: dell-smbios: Correct some style warningsMario Limonciello1-3/+5
WARNING: function definition argument 'struct calling_interface_buffer *' should also have an identifier name + int (*call_fn)(struct calling_interface_buffer *); WARNING: Block comments use * on subsequent lines + /* 4 bytes of table header, plus 7 bytes of Dell header, plus at least + 6 bytes of entry */ WARNING: Block comments use a trailing */ on a separate line + 6 bytes of entry */ Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2018-03-09loop: Fix lost writes caused by missing flagRoss Zwisler1-1/+1
The following commit: commit aa4d86163e4e ("block: loop: switch to VFS ITER_BVEC") replaced __do_lo_send_write(), which used ITER_KVEC iterators, with lo_write_bvec() which uses ITER_BVEC iterators. In this change, though, the WRITE flag was lost: - iov_iter_kvec(&from, ITER_KVEC | WRITE, &kvec, 1, len); + iov_iter_bvec(&i, ITER_BVEC, bvec, 1, bvec->bv_len); This flag is necessary for the DAX case because we make decisions based on whether or not the iterator is a READ or a WRITE in dax_iomap_actor() and in dax_iomap_rw(). We end up going through this path in configurations where we combine a PMEM device with 4k sectors, a loopback device and DAX. The consequence of this missed flag is that what we intend as a write actually turns into a read in the DAX code, so no data is ever written. The very simplest test case is to create a loopback device and try and write a small string to it, then hexdump a few bytes of the device to see if the write took. Without this patch you read back all zeros, with this you read back the string you wrote. For XFS this causes us to fail or panic during the following xfstests: xfs/074 xfs/078 xfs/216 xfs/217 xfs/250 For ext4 we have a similar issue where writes never happen, but we don't currently have any xfstests that use loopback and show this issue. Fix this by restoring the WRITE flag argument to iov_iter_bvec(). This causes the xfstests to all pass. Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@vger.kernel.org Fixes: commit aa4d86163e4e ("block: loop: switch to VFS ITER_BVEC") Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-09clocksource/atmel-st: Add 'depends on HAS_IOMEM' to fix unmet dependencyMasahiro Yamada1-0/+1
The ATMEL_ST config selects MFD_SYSCON, but does not depend on HAS_IOMEM. Compile testing on architecture without HAS_IOMEM causes "unmet direct dependencies" in Kconfig phase. Detected by "make ARCH=score allyesconfig". Add the proper dependency to the ATMEL_ST config. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Link: https://lkml.kernel.org/r/1520335233-11277-1-git-send-email-yamada.masahiro@socionext.com
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.