| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-12-27
The following pull-request contains BPF updates for your *net-next* tree.
We've added 127 non-merge commits during the last 17 day(s) which contain
a total of 110 files changed, 6901 insertions(+), 2721 deletions(-).
There are three merge conflicts. Conflicts and resolution looks as follows:
1) Merge conflict in net/bpf/test_run.c:
There was a tree-wide cleanup c593642c8be0 ("treewide: Use sizeof_field() macro")
which gets in the way with b590cb5f802d ("bpf: Switch to offsetofend in
BPF_PROG_TEST_RUN"):
<<<<<<< HEAD
if (!range_is_zero(__skb, offsetof(struct __sk_buff, priority) +
sizeof_field(struct __sk_buff, priority),
=======
if (!range_is_zero(__skb, offsetofend(struct __sk_buff, priority),
>>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c
There are a few occasions that look similar to this. Always take the chunk with
offsetofend(). Note that there is one where the fields differ in here:
<<<<<<< HEAD
if (!range_is_zero(__skb, offsetof(struct __sk_buff, tstamp) +
sizeof_field(struct __sk_buff, tstamp),
=======
if (!range_is_zero(__skb, offsetofend(struct __sk_buff, gso_segs),
>>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c
Just take the one with offsetofend() /and/ gso_segs. Latter is correct due to
850a88cc4096 ("bpf: Expose __sk_buff wire_len/gso_segs to BPF_PROG_TEST_RUN").
2) Merge conflict in arch/riscv/net/bpf_jit_comp.c:
(I'm keeping Bjorn in Cc here for a double-check in case I got it wrong.)
<<<<<<< HEAD
if (is_13b_check(off, insn))
return -1;
emit(rv_blt(tcc, RV_REG_ZERO, off >> 1), ctx);
=======
emit_branch(BPF_JSLT, RV_REG_T1, RV_REG_ZERO, off, ctx);
>>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c
Result should look like:
emit_branch(BPF_JSLT, tcc, RV_REG_ZERO, off, ctx);
3) Merge conflict in arch/riscv/include/asm/pgtable.h:
<<<<<<< HEAD
=======
#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
#define VMALLOC_END (PAGE_OFFSET - 1)
#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
#define BPF_JIT_REGION_SIZE (SZ_128M)
#define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
#define BPF_JIT_REGION_END (VMALLOC_END)
/*
* Roughly size the vmemmap space to be large enough to fit enough
* struct pages to map half the virtual address space. Then
* position vmemmap directly below the VMALLOC region.
*/
#define VMEMMAP_SHIFT \
(CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
#define VMEMMAP_END (VMALLOC_START - 1)
#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
#define vmemmap ((struct page *)VMEMMAP_START)
>>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c
Only take the BPF_* defines from there and move them higher up in the
same file. Remove the rest from the chunk. The VMALLOC_* etc defines
got moved via 01f52e16b868 ("riscv: define vmemmap before pfn_to_page
calls"). Result:
[...]
#define __S101 PAGE_READ_EXEC
#define __S110 PAGE_SHARED_EXEC
#define __S111 PAGE_SHARED_EXEC
#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
#define VMALLOC_END (PAGE_OFFSET - 1)
#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
#define BPF_JIT_REGION_SIZE (SZ_128M)
#define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
#define BPF_JIT_REGION_END (VMALLOC_END)
/*
* Roughly size the vmemmap space to be large enough to fit enough
* struct pages to map half the virtual address space. Then
* position vmemmap directly below the VMALLOC region.
*/
#define VMEMMAP_SHIFT \
(CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
#define VMEMMAP_END (VMALLOC_START - 1)
#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
[...]
Let me know if there are any other issues.
Anyway, the main changes are:
1) Extend bpftool to produce a struct (aka "skeleton") tailored and specific
to a provided BPF object file. This provides an alternative, simplified API
compared to standard libbpf interaction. Also, add libbpf extern variable
resolution for .kconfig section to import Kconfig data, from Andrii Nakryiko.
2) Add BPF dispatcher for XDP which is a mechanism to avoid indirect calls by
generating a branch funnel as discussed back in bpfconf'19 at LSF/MM. Also,
add various BPF riscv JIT improvements, from Björn Töpel.
3) Extend bpftool to allow matching BPF programs and maps by name,
from Paul Chaignon.
4) Support for replacing cgroup BPF programs attached with BPF_F_ALLOW_MULTI
flag for allowing updates without service interruption, from Andrey Ignatov.
5) Cleanup and simplification of ring access functions for AF_XDP with a
bonus of 0-5% performance improvement, from Magnus Karlsson.
6) Enable BPF JITs for x86-64 and arm64 by default. Also, final version of
audit support for BPF, from Daniel Borkmann and latter with Jiri Olsa.
7) Move and extend test_select_reuseport into BPF program tests under
BPF selftests, from Jakub Sitnicki.
8) Various BPF sample improvements for xdpsock for customizing parameters
to set up and benchmark AF_XDP, from Jay Jayatheerthan.
9) Improve libbpf to provide a ulimit hint on permission denied errors.
Also change XDP sample programs to attach in driver mode by default,
from Toke Høiland-Jørgensen.
10) Extend BPF test infrastructure to allow changing skb mark from tc BPF
programs, from Nikita V. Shirokov.
11) Optimize prologue code sequence in BPF arm32 JIT, from Russell King.
12) Fix xdp_redirect_cpu BPF sample to manually attach to tracepoints after
libbpf conversion, from Jesper Dangaard Brouer.
13) Minor misc improvements from various others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking fixes from David Miller:
1) Several nf_flow_table_offload fixes from Pablo Neira Ayuso,
including adding a missing ipv6 match description.
2) Several heap overflow fixes in mwifiex from qize wang and Ganapathi
Bhat.
3) Fix uninit value in bond_neigh_init(), from Eric Dumazet.
4) Fix non-ACPI probing of nxp-nci, from Stephan Gerhold.
5) Fix use after free in tipc_disc_rcv(), from Tuong Lien.
6) Enforce limit of 33 tail calls in mips and riscv JIT, from Paul
Chaignon.
7) Multicast MAC limit test is off by one in qede, from Manish Chopra.
8) Fix established socket lookup race when socket goes from
TCP_ESTABLISHED to TCP_LISTEN, because there lacks an intervening
RCU grace period. From Eric Dumazet.
9) Don't send empty SKBs from tcp_write_xmit(), also from Eric Dumazet.
10) Fix active backup transition after link failure in bonding, from
Mahesh Bandewar.
11) Avoid zero sized hash table in gtp driver, from Taehee Yoo.
12) Fix wrong interface passed to ->mac_link_up(), from Russell King.
13) Fix DSA egress flooding settings in b53, from Florian Fainelli.
14) Memory leak in gmac_setup_txqs(), from Navid Emamdoost.
15) Fix double free in dpaa2-ptp code, from Ioana Ciornei.
16) Reject invalid MTU values in stmmac, from Jose Abreu.
17) Fix refcount leak in error path of u32 classifier, from Davide
Caratti.
18) Fix regression causing iwlwifi firmware crashes on boot, from Anders
Kaseorg.
19) Fix inverted return value logic in llc2 code, from Chan Shu Tak.
20) Disable hardware GRO when XDP is attached to qede, frm Manish
Chopra.
21) Since we encode state in the low pointer bits, dst metrics must be
at least 4 byte aligned, which is not necessarily true on m68k. Add
annotations to fix this, from Geert Uytterhoeven.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (160 commits)
sfc: Include XDP packet headroom in buffer step size.
sfc: fix channel allocation with brute force
net: dst: Force 4-byte alignment of dst_metrics
selftests: pmtu: fix init mtu value in description
hv_netvsc: Fix unwanted rx_table reset
net: phy: ensure that phy IDs are correctly typed
mod_devicetable: fix PHY module format
qede: Disable hardware gro when xdp prog is installed
net: ena: fix issues in setting interrupt moderation params in ethtool
net: ena: fix default tx interrupt moderation interval
net/smc: unregister ib devices in reboot_event
net: stmmac: platform: Fix MDIO init for platforms without PHY
llc2: Fix return statement of llc_stat_ev_rx_null_dsap_xid_c (and _test_c)
net: hisilicon: Fix a BUG trigered by wrong bytes_compl
net: dsa: ksz: use common define for tag len
s390/qeth: don't return -ENOTSUPP to userspace
s390/qeth: fix promiscuous mode after reset
s390/qeth: handle error due to unsupported transport mode
cxgb4: fix refcount init for TC-MQPRIO offload
tc-testing: initial tdc selftests for cls_u32
...
|
|
trace_printk schedules work via irq_work_queue(), but doesn't
wait until it was processed. The kprobe_module.tc testcase does:
:;: "Load module again, which means the event1 should be recorded";:
modprobe trace-printk
grep "event1:" trace
so the grep which checks the trace file might run before the irq work
was processed. Fix this by adding a irq_work_sync().
Link: http://lore.kernel.org/linux-trace-devel/20191218074427.96184-3-svens@linux.ibm.com
Cc: stable@vger.kernel.org
Fixes: af2a0750f3749 ("selftests/ftrace: Improve kprobe on module testcase to load/unload module")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
When sample xdp_redirect_cpu was converted to use libbpf, the
tracepoints used by this sample were not getting attached automatically
like with bpf_load.c. The BPF-maps was still getting loaded, thus
nobody notice that the tracepoints were not updating these maps.
This fix doesn't use the new skeleton code, as this bug was introduced
in v5.1 and stable might want to backport this. E.g. Red Hat QA uses
this sample as part of their testing.
Fixes: bbaf6029c49c ("samples/bpf: Convert XDP samples to libbpf usage")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157685877642.26195.2798780195186786841.stgit@firesoul
|
|
The UDP payload fill pattern can be specified using '-P' or '--tx-pkt-pattern'
option. It is an unsigned 32 bit field and defaulted to 0x12345678.
The IP and UDP checksum is calculated by the code as per the content of
the packet before transmission.
Signed-off-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191220085530.4980-7-jay.jayatheerthan@intel.com
|
|
New option '-s' or '--tx-pkt-size' has been added to specify the transmit
packet size. The packet size ranges from 47 to 4096 bytes. When this
option is not provided, it defaults to 64 byte packet.
The code uses struct ethhdr, struct iphdr and struct udphdr to form the
transmit packet. The MAC address, IP address and UDP ports are set to default
values.
The code calculates IP and UDP checksums before sending the packet.
Checksum calculation code in Linux kernel is used for this purpose.
The Ethernet FCS is not filled by the code.
Signed-off-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191220085530.4980-6-jay.jayatheerthan@intel.com
|
|
Use '-C' or '--tx-pkt-count' to specify number of packets to send.
If it is not specified, the application sends packets forever. If packet
count is not a multiple of batch size, last batch sent is less than the
batch size.
Signed-off-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191220085530.4980-5-jay.jayatheerthan@intel.com
|
|
New option to specify batch size for tx, rx and l2fwd has been added. This
allows fine tuning to maximize performance. It is specified using '-b' or
'--batch_size' options. When not specified default is 64.
Signed-off-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191220085530.4980-4-jay.jayatheerthan@intel.com
|
|
Add code to do cleanup for signals and application completion in a unified
fashion. The signal handler sets benckmark_done flag terminating the
threads. The cleanup is called before returning from main() function.
Signed-off-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191220085530.4980-3-jay.jayatheerthan@intel.com
|
|
The application now supports '-d' or '--duration' option to specify number of
seconds to run. This is used in tx, rx and l2fwd features. If this option is
not provided, the application runs forever.
Signed-off-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191220085530.4980-2-jay.jayatheerthan@intel.com
|
|
When attaching XDP programs, userspace can set flags to request the attach
mode (generic/SKB mode, driver mode or hw offloaded mode). If no such flags
are requested, the kernel will attempt to attach in driver mode, and then
silently fall back to SKB mode if this fails.
The silent fallback is a major source of user confusion, as users will try
to load a program on a device without XDP support, and instead of an error
they will get the silent fallback behaviour, not notice, and then wonder
why performance is not what they were expecting.
In an attempt to combat this, let's switch all the samples to default to
explicitly requesting driver-mode attach. As part of this, ensure that all
the userspace utilities have a switch to enable SKB mode. For those that
have a switch to request driver mode, keep it but turn it into a no-op.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Link: https://lore.kernel.org/bpf/20191216110742.364456-1-toke@redhat.com
|
|
It seems Clang can in some cases turn on stack protection by default, which
doesn't work with BPF. This was reported once before[0], but it seems the
flag to explicitly turn off the stack protector wasn't added to the
Makefile, so do that now.
The symptom of this is compile errors like the following:
error: <unknown>:0:0: in function bpf_prog1 i32 (%struct.__sk_buff*): A call to built-in function '__stack_chk_fail' is not supported.
[0] https://www.spinics.net/lists/netdev/msg556400.html
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191216103819.359535-1-toke@redhat.com
|
|
Since libbpf now links against zlib, this needs to be included in the
linker invocation for the userspace programs in samples/bpf that link
statically against libbpf.
Fixes: 166750bc1dd2 ("libbpf: Support libbpf-provided extern variables")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/20191216102405.353834-1-toke@redhat.com
|
|
Add xdp_redirect and per_socket_stats_example in build targets.
They got removed from build targets in Makefile reorganization.
Fixes: 1d97c6c2511f ("samples/bpf: Base target programs rules on Makefile.target")
Signed-off-by: Prashant Bhole <prashantbhole.linux@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191216071619.25479-1-prashantbhole.linux@gmail.com
|
|
Currently, open() is called from the user program and it calls the syscall
'sys_openat', not the 'sys_open'. This leads to an error of the program
of user side, due to the fact that the counter maps are zero since no
function such 'sys_open' is called.
This commit adds the kernel bpf program which are attached to the
tracepoint 'sys_enter_openat' and 'sys_enter_openat'.
Fixes: 1da236b6be963 ("bpf: add a test case for syscalls/sys_{enter|exit}_* tracepoints")
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Previously, when this sample is added, commit 1c47910ef8013
("samples/bpf: add perf_event+bpf example"), a symbol 'sys_read' and
'sys_write' has been used without no prefixes. But currently there are
no exact symbols with these under kallsyms and this leads to failure.
This commit changes exact compare to substring compare to keep compatible
with exact symbol or prefixed symbol.
Fixes: 1c47910ef8013 ("samples/bpf: add perf_event+bpf example")
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191205080114.19766-2-danieltimlee@gmail.com
|
|
In the days of using bpf_load.c the order in which the 'maps' sections
were defines in BPF side (*_kern.c) file, were used by userspace side
to identify the map via using the map order as an index. In effect the
order-index is created based on the order the maps sections are stored
in the ELF-object file, by the LLVM compiler.
This have also carried over in libbpf via API bpf_map__next(NULL, obj)
to extract maps in the order libbpf parsed the ELF-object file.
When BTF based maps were introduced a new section type ".maps" were
created. I found that the LLVM compiler doesn't create the ".maps"
sections in the order they are defined in the C-file. The order in the
ELF file is based on the order the map pointer is referenced in the code.
This combination of changes lead to xdp_rxq_info mixing up the map
file-descriptors in userspace, resulting in very broken behaviour, but
without warning the user.
This patch fix issue by instead using bpf_object__find_map_by_name()
to find maps via their names. (Note, this is the ELF name, which can
be longer than the name the kernel retains).
Fixes: be5bca44aa6b ("samples: bpf: convert some XDP samples from bpf_load to libbpf")
Fixes: 451d1dc886b5 ("samples: bpf: update map definition to new syntax BTF-defined map")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157529025128.29832.5953245340679936909.stgit@firesoul
|
|
Pull tracing updates from Steven Rostedt:
"New tracing features:
- New PERMANENT flag to ftrace_ops when attaching a callback to a
function.
As /proc/sys/kernel/ftrace_enabled when set to zero will disable
all attached callbacks in ftrace, this has a detrimental impact on
live kernel tracing, as it disables all that it patched. If a
ftrace_ops is registered to ftrace with the PERMANENT flag set, it
will prevent ftrace_enabled from being disabled, and if
ftrace_enabled is already disabled, it will prevent a ftrace_ops
with PREMANENT flag set from being registered.
- New register_ftrace_direct().
As eBPF would like to register its own trampolines to be called by
the ftrace nop locations directly, without going through the ftrace
trampoline, this function has been added. This allows for eBPF
trampolines to live along side of ftrace, perf, kprobe and live
patching. It also utilizes the ftrace enabled_functions file that
keeps track of functions that have been modified in the kernel, to
allow for security auditing.
- Allow for kernel internal use of ftrace instances.
Subsystems in the kernel can now create and destroy their own
tracing instances which allows them to have their own tracing
buffer, and be able to record events without worrying about other
users from writing over their data.
- New seq_buf_hex_dump() that lets users use the hex_dump() in their
seq_buf usage.
- Notifications now added to tracing_max_latency to allow user space
to know when a new max latency is hit by one of the latency
tracers.
- Wider spread use of generic compare operations for use of bsearch
and friends.
- More synthetic event fields may be defined (32 up from 16)
- Use of xarray for architectures with sparse system calls, for the
system call trace events.
This along with small clean ups and fixes"
* tag 'trace-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (51 commits)
tracing: Enable syscall optimization for MIPS
tracing: Use xarray for syscall trace events
tracing: Sample module to demonstrate kernel access to Ftrace instances.
tracing: Adding new functions for kernel access to Ftrace instances
tracing: Fix Kconfig indentation
ring-buffer: Fix typos in function ring_buffer_producer
ftrace: Use BIT() macro
ftrace: Return ENOTSUPP when DYNAMIC_FTRACE_WITH_DIRECT_CALLS is not configured
ftrace: Rename ftrace_graph_stub to ftrace_stub_graph
ftrace: Add a helper function to modify_ftrace_direct() to allow arch optimization
ftrace: Add helper find_direct_entry() to consolidate code
ftrace: Add another check for match in register_ftrace_direct()
ftrace: Fix accounting bug with direct->count in register_ftrace_direct()
ftrace/selftests: Fix spelling mistake "wakeing" -> "waking"
tracing: Increase SYNTH_FIELDS_MAX for synthetic_events
ftrace/samples: Add a sample module that implements modify_ftrace_direct()
ftrace: Add modify_ftrace_direct()
tracing: Add missing "inline" in stub function of latency_fsnotify()
tracing: Remove stray tab in TRACE_EVAL_MAP_FILE's help text
tracing: Use seq_buf_hex_dump() to dump buffers
...
|
|
Pull char/misc driver updates from Greg KH:
"Here is the big set of char/misc and other driver patches for 5.5-rc1
Loads of different things in here, this feels like the catch-all of
driver subsystems these days. Full details are in the shortlog, but
nothing major overall, just lots of driver updates and additions.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (198 commits)
char: Fix Kconfig indentation, continued
habanalabs: add more protection of device during reset
habanalabs: flush EQ workers in hard reset
habanalabs: make the reset code more consistent
habanalabs: expose reset counters via existing INFO IOCTL
habanalabs: make code more concise
habanalabs: use defines for F/W files
habanalabs: remove prints on successful device initialization
habanalabs: remove unnecessary checks
habanalabs: invalidate MMU cache only once
habanalabs: skip VA block list update in reset flow
habanalabs: optimize MMU unmap
habanalabs: prevent read/write from/to the device during hard reset
habanalabs: split MMU properties to PCI/DRAM
habanalabs: re-factor MMU masks and documentation
habanalabs: type specific MMU cache invalidation
habanalabs: re-factor memory module code
habanalabs: export uapi defines to user-space
habanalabs: don't print error when queues are full
habanalabs: increase max jobs number to 512
...
|
|
This is a sample module to demonstrate the use of the newly introduced and
exported APIs to access Ftrace instances from within the kernel.
Newly introduced APIs used here -
1. Create/Lookup a trace array with the given name.
struct trace_array *trace_array_get_by_name(const char *name)
2. Destroy/Remove a trace array.
int trace_array_destroy(struct trace_array *tr)
4. Enable/Disable trace events:
int trace_array_set_clr_event(struct trace_array *tr, const char *system,
const char *event, bool enable);
Exported APIs -
1. trace_printk equivalent for instances.
int trace_array_printk(struct trace_array *tr,
unsigned long ip, const char *fmt, ...);
2. Helper function.
void trace_printk_init_buffers(void);
3. To decrement the reference counter.
void trace_array_put(struct trace_array *tr)
Sample output(contents of /sys/kernel/tracing/instances/sample-instance)
NOTE: Tracing disabled after ~5 sec)
_-----=> irqs-off
/ _----=> need-resched
| / _---=> hardirq/softirq
|| / _--=> preempt-depth
||| / delay
TASK-PID CPU# |||| TIMESTAMP FUNCTION
| | | |||| | |
sample-instance-1452 [002] .... 49.430948: simple_thread: trace_array_printk: count=0
sample-instance-1452 [002] .... 49.430951: sample_event: count value=0 at jiffies=4294716608
sample-instance-1452 [002] .... 50.454847: simple_thread: trace_array_printk: count=1
sample-instance-1452 [002] .... 50.454849: sample_event: count value=1 at jiffies=4294717632
sample-instance-1452 [002] .... 51.478748: simple_thread: trace_array_printk: count=2
sample-instance-1452 [002] .... 51.478750: sample_event: count value=2 at jiffies=4294718656
sample-instance-1452 [002] .... 52.502652: simple_thread: trace_array_printk: count=3
sample-instance-1452 [002] .... 52.502655: sample_event: count value=3 at jiffies=4294719680
sample-instance-1452 [002] .... 53.526533: simple_thread: trace_array_printk: count=4
sample-instance-1452 [002] .... 53.526535: sample_event: count value=4 at jiffies=4294720704
sample-instance-1452 [002] .... 54.550438: simple_thread: trace_array_printk: count=5
sample-instance-1452 [002] .... 55.574336: simple_thread: trace_array_printk: count=6
Link: http://lkml.kernel.org/r/1574276919-11119-3-git-send-email-divya.indi@oracle.com
Reviewed-by: Aruna Ramakrishna <aruna.ramakrishna@oracle.com>
Signed-off-by: Divya Indi <divya.indi@oracle.com>
[ Moved to samples/ftrace ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-11-20
The following pull-request contains BPF updates for your *net-next* tree.
We've added 81 non-merge commits during the last 17 day(s) which contain
a total of 120 files changed, 4958 insertions(+), 1081 deletions(-).
There are 3 trivial conflicts, resolve it by always taking the chunk from
196e8ca74886c433:
<<<<<<< HEAD
=======
void *bpf_map_area_mmapable_alloc(u64 size, int numa_node);
>>>>>>> 196e8ca74886c433dcfc64a809707074b936aaf5
<<<<<<< HEAD
void *bpf_map_area_alloc(u64 size, int numa_node)
=======
static void *__bpf_map_area_alloc(u64 size, int numa_node, bool mmapable)
>>>>>>> 196e8ca74886c433dcfc64a809707074b936aaf5
<<<<<<< HEAD
if (size <= (PAGE_SIZE << PAGE_ALLOC_COSTLY_ORDER)) {
=======
/* kmalloc()'ed memory can't be mmap()'ed */
if (!mmapable && size <= (PAGE_SIZE << PAGE_ALLOC_COSTLY_ORDER)) {
>>>>>>> 196e8ca74886c433dcfc64a809707074b936aaf5
The main changes are:
1) Addition of BPF trampoline which works as a bridge between kernel functions,
BPF programs and other BPF programs along with two new use cases: i) fentry/fexit
BPF programs for tracing with practically zero overhead to call into BPF (as
opposed to k[ret]probes) and ii) attachment of the former to networking related
programs to see input/output of networking programs (covering xdpdump use case),
from Alexei Starovoitov.
2) BPF array map mmap support and use in libbpf for global data maps; also a big
batch of libbpf improvements, among others, support for reading bitfields in a
relocatable manner (via libbpf's CO-RE helper API), from Andrii Nakryiko.
3) Extend s390x JIT with usage of relative long jumps and loads in order to lift
the current 64/512k size limits on JITed BPF programs there, from Ilya Leoshkevich.
4) Add BPF audit support and emit messages upon successful prog load and unload in
order to have a timeline of events, from Daniel Borkmann and Jiri Olsa.
5) Extension to libbpf and xdpsock sample programs to demo the shared umem mode
(XDP_SHARED_UMEM) as well as RX-only and TX-only sockets, from Magnus Karlsson.
6) Several follow-up bug fixes for libbpf's auto-pinning code and a new API
call named bpf_get_link_xdp_info() for retrieving the full set of prog
IDs attached to XDP, from Toke Høiland-Jørgensen.
7) Add BTF support for array of int, array of struct and multidimensional arrays
and enable it for skb->cb[] access in kfree_skb test, from Martin KaFai Lau.
8) Fix AF_XDP by using the correct number of channels from ethtool, from Luigi Rizzo.
9) Two fixes for BPF selftest to get rid of a hang in test_tc_tunnel and to avoid
xdping to be run as standalone, from Jiri Benc.
10) Various BPF selftest fixes when run with latest LLVM trunk, from Yonghong Song.
11) Fix a memory leak in BPF fentry test run data, from Colin Ian King.
12) Various smaller misc cleanups and improvements mostly all over BPF selftests and
samples, from Daniel T. Lee, Andre Guedes, Anders Roxell, Mao Wenan, Yue Haibing.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 743e568c1586 (samples/bpf: Add a "force" flag to XDP samples)
introduced the '-F' option but missed adding it to the usage() and the
'long_option' array.
Fixes: 743e568c1586 (samples/bpf: Add a "force" flag to XDP samples)
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191114162847.221770-2-andre.guedes@intel.com
|
|
The '-f' option is shown twice in the usage(). This patch removes the
outdated version.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191114162847.221770-1-andre.guedes@intel.com
|
|
There is a spelling mistake in a trace_printk message. As well as in
the selftests that search for this string.
Link: http://lkml.kernel.org/r/20191115085938.38947-1-colin.king@canonical.com
Link: http://lkml.kernel.org/r/20191115090356.39572-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Add a sample module that tests modify_ftrace_direct(), and this can be used
by the selftests as well.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Add another module sample that registers a direct trampoline to a function
via register_ftrace_direct(). Having another module that does this allows to
test the use case of multiple direct callers registered, as more than one
direct caller goes into another path, and is needed to perform proper
testing of the register_ftrace_direct() call.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Add a sample module that shows a simple use case for
regsiter_ftrace_direct(), and how to use it.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Side effect of some kbuild changes resulted in breaking the
documented way to build samples/bpf/.
This patch change the samples/bpf/Makefile to work again, when
invoking make from the subdir samples/bpf/. Also update the
documentation in README.rst, to reflect the new way to build.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We need the char/misc driver fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use Rx-only sockets for the rxdrop sample and Tx-only sockets for the
txpush sample in the xdpsock application. This so that we exercise and
show case these socket types too.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: William Tu <u9012063@gmail.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/bpf/1573148860-30254-5-git-send-email-magnus.karlsson@intel.com
|
|
Add support for the XDP_SHARED_UMEM mode to the xdpsock sample
application. As libbpf does not have a built in XDP program for this
mode, we use an explicitly loaded XDP program. This also serves as an
example on how to write your own XDP program that can route to an
AF_XDP socket.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: William Tu <u9012063@gmail.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/bpf/1573148860-30254-3-git-send-email-magnus.karlsson@intel.com
|
|
One conflict in the BPF samples Makefile, some fixes in 'net' whilst
we were converting over to Makefile.target rules in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since, the new syntax of BTF-defined map has been introduced,
the syntax for using maps under samples directory are mixed up.
For example, some are already using the new syntax, and some are using
existing syntax by calling them as 'legacy'.
As stated at commit abd29c931459 ("libbpf: allow specifying map
definitions using BTF"), the BTF-defined map has more compatablility
with extending supported map definition features.
The commit doesn't replace all of the map to new BTF-defined map,
because some of the samples still use bpf_load instead of libbpf, which
can't properly create BTF-defined map.
This will only updates the samples which uses libbpf API for loading bpf
program. (ex. bpf_prog_load_xattr)
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, under samples, several methods are being used to load bpf
program.
Since using libbpf is preferred solution, lots of previously used
'load_bpf_file' from bpf_load are replaced with 'bpf_prog_load_xattr'
from libbpf.
But some of the error messages still show up as 'load_bpf_file' instead
of 'bpf_prog_load_xattr'.
This commit fixes outdated errror messages under samples and fixes some
code style issues.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191107005153.31541-2-danieltimlee@gmail.com
|
|
Use bpf_probe_read_user() helper instead of bpf_probe_read() for samples that
attach to kprobes probing on user addresses.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/5b0144b3f8e031ec5e2438bd7de8d7877e63bf2f.1572649915.git.daniel@iogearbox.net
|
|
To remove that test_attr__{enabled/open} are used by perf-sys.h, we
set HAVE_ATTR_TEST to zero.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Tested-by: KP Singh <kpsingh@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: http://lore.kernel.org/bpf/20191001113307.27796-3-bjorn.topel@gmail.com
|
|
We want the binder fix in here as well for testing and to work on top
of.
Also handles a merge issue in binder.c to help linux-next out
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use hostprogs kbuild constructs to compile
mei sample program mei-amt-version
Add CONFIG_SAMPLE_INTEL_MEI option to enable/disable
the feature.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20191010132710.4075-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Several cases of overlapping changes which were for the most
part trivially resolvable.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2019-10-14
The following pull-request contains BPF updates for your *net-next* tree.
12 days of development and
85 files changed, 1889 insertions(+), 1020 deletions(-)
The main changes are:
1) auto-generation of bpf_helper_defs.h, from Andrii.
2) split of bpf_helpers.h into bpf_{helpers, helper_defs, endian, tracing}.h
and move into libbpf, from Andrii.
3) Track contents of read-only maps as scalars in the verifier, from Andrii.
4) small x86 JIT optimization, from Daniel.
5) cross compilation support, from Ivan.
6) bpf flow_dissector enhancements, from Jakub and Stanislav.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add couple preparation steps: clean and configuration. Also add newly
added sysroot support info to cross-compile section.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191011002808.28206-16-ivan.khoronzhuk@linaro.org
|
|
Basically it only enables that was added by previous couple fixes.
Sysroot contains correct libs installed and its headers. Useful when
working with NFC or virtual machine.
Usage example:
clean (on demand)
make ARCH=arm -C samples/bpf clean
make ARCH=arm -C tools clean
make ARCH=arm clean
configure and install headers:
make ARCH=arm defconfig
make ARCH=arm headers_install
build samples/bpf:
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- samples/bpf/ \
SYSROOT="path/to/sysroot"
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191011002808.28206-15-ivan.khoronzhuk@linaro.org
|
|
In order to build lib using C/LD flags of target arch, provide them
to libbpf make.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191011002808.28206-14-ivan.khoronzhuk@linaro.org
|
|
No need in hacking HOSTCC to be cross-compiler any more, so drop
this trick and use target CC for HDR_PROBE.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191011002808.28206-11-ivan.khoronzhuk@linaro.org
|
|
While compiling natively, the host's cflags and ldflags are equal to
ones used from HOSTCFLAGS and HOSTLDFLAGS. When cross compiling it
should have own, used for target arch. While verification, for arm,
arm64 and x86_64 the following flags were used always:
-Wall -O2
-fomit-frame-pointer
-Wmissing-prototypes
-Wstrict-prototypes
So, add them as they were verified and used before adding
Makefile.target and lets omit "-fomit-frame-pointer" as were proposed
while review, as no sense in such optimization for samples.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191011002808.28206-10-ivan.khoronzhuk@linaro.org
|
|
The main reason for that - HOSTCC and CC have different aims.
HOSTCC is used to build programs running on host, that can
cross-comple target programs with CC. It was tested for arm and arm64
cross compilation, based on linaro toolchain, but should work for
others.
So, in order to split cross compilation (CC) with host build (HOSTCC),
lets base samples on Makefile.target. It allows to cross-compile
samples/bpf programs with CC while auxialry tools running on host
built with HOSTCC.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191011002808.28206-9-ivan.khoronzhuk@linaro.org
|
|
The Makefile.target is added only and will be used in
sample/bpf/Makefile later in order to switch cross-compiling to CC
from HOSTCC environment.
The HOSTCC is supposed to build binaries and tools running on the host
afterwards, in order to simplify build or so, like "fixdep" or else.
In case of cross compiling "fixdep" is executed on host when the rest
samples should run on target arch. In order to build binaries for
target arch with CC and tools running on host with HOSTCC, lets add
Makefile.target for simplicity, having definition and routines similar
to ones, used in script/Makefile.host. This allows later add
cross-compilation to samples/bpf with minimum changes.
The tprog stands for target programs built with CC.
Makefile.target contains only stuff needed for samples/bpf, potentially
can be reused later and now needed only for unblocking tricky
samples/bpf cross compilation.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191011002808.28206-8-ivan.khoronzhuk@linaro.org
|
|
Drop inclusion for bpf_load -I$(objtree)/usr/include as it is
included for all objects anyway, with above line:
KBUILD_HOSTCFLAGS += -I$(objtree)/usr/include
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191011002808.28206-7-ivan.khoronzhuk@linaro.org
|
|
For arm, -D__LINUX_ARM_ARCH__=X is min version used as instruction
set selector and is absolutely required while parsing some parts of
headers. It's present in KBUILD_CFLAGS but not in autoconf.h, so let's
retrieve it from and add to programs cflags. In another case errors
like "SMP is not supported" for armv7 and bunch of other errors are
issued resulting to incorrect final object.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191011002808.28206-6-ivan.khoronzhuk@linaro.org
|
|
It can overlap with CFLAGS used for libraries built with gcc if
not now then in next patches. Correct it here for simplicity.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191011002808.28206-5-ivan.khoronzhuk@linaro.org
|
David S. Miller
Linus Torvalds
Sven Schnelle
Jesper Dangaard Brouer
Jay Jayatheerthan
Toke Høiland-Jørgensen
Prashant Bhole
Daniel T. Lee
Divya Indi
Andre Guedes
Colin Ian King
Steven Rostedt (VMware)
Greg Kroah-Hartman
Magnus Karlsson
Daniel Borkmann
Björn Töpel
Tomas Winkler
Ivan Khoronzhuk