aboutsummaryrefslogtreecommitdiffstats
path: root/scripts/checkpatch.pl (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2016-06-21mlxsw: spectrum: Remove unnecessary function argumentIdo Schimmel1-4/+3
The argument 'br_dev' is never used, so remove it. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21mlxsw: spectrum: Make unlinking functions return voidIdo Schimmel1-40/+28
When responding to unlinking CHANGEUPPER notifications we shouldn't return any value, as it's not checked by upper layers. In addition, there's nothing the driver can do in case of failure, so it should simply continue and try to free as much resources as possible and not stop on first error. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21mlxsw: spectrum: Use WARN_ON() return valueIdo Schimmel1-12/+4
Instead of checking for a condition and then issue the warning, just do it in one go and simplify the code. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21mlxsw: spectrum: Remove unnecessary checks from event processingIdo Schimmel1-4/+2
When upper device of a VLAN device changes we already made sure it's a bridge device in PRECHANGEUPPER, so no need to check it's a master device in CHANGEUPPER. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21mlxsw: spectrum: Forbid LAG slave from having VLAN uppersIdo Schimmel1-1/+6
When a port netdev is put under LAG it cannot have VLAN upper devices, so forbid that. The LAG device itself can have VLAN upper devices. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21mlxsw: spectrum: Sanitize port netdev upper devicesIdo Schimmel1-0/+7
We currently only support the following upper devices for port netdevs: 1) Bridge 2) LAG (bond / team) 3) VLAN Any other device is forbidden, so return an error. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21mlxsw: spectrum: Use notifier_from_errno() in notifier blockIdo Schimmel1-63/+29
Instead of checking the error value and returning NOTIFY_BAD, just use notifier_from_errno() and simplify the code. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21net: hns: bug fix about TSO on|off when there is trafficDaode Huang1-4/+4
When enable/disable tso, the driver tries to access the hardware register, but this operation will cause the port unavalible when there is traffic. This patch tries to enable TSO when initialize, then control tso through TSE bit in transmit descriptor. Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21net: hns: change the default coalesce usecsDaode Huang2-2/+2
The default coalesce timeout is 3us, which is will cause CPU usage is too high. This patch change it to 50us in order to reduce CPU usage and the value makes sure network latency also meets requirement. Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21net: hns: fix sbm default parameters config errorDaode Huang2-17/+39
The default sbm config parameter leaves little buffer when there is heavy traffic, which will cause packets drop. This patch changes them to make enough buffers for handling packets. Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21net: hns: fix bug that alloc skb fail lead to port unavailableJun He1-2/+3
When hns_nic_poll_rx_skb alloc skb fail, it will break receive cycle and read new fbd_num to start new receive cycle. It recomputes cycle num is fbd_num minus clean_count, actually this cycle num is too big because it drop out receive cycle. It brings about the port unavailable. So we will goto out when alloc skb fail to fix this bug. Signed-off-by: Jun He <hjat2005@huawei.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21net: hns: bug fix about led control logic when link downDaode Huang1-5/+7
The default driver sets anchor led bit to 0 when link down, actually, the anchor bit should be set to 1, so fixes it when link status is down. Secondly, change the return value of cpld_set_led_id to 0, which means leave the cpld to control led blink frequece other than the driver itself. Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21net: hns: delete redundancy ring enable operationsDaode Huang4-21/+10
When network interface is enabled, the ring enable operation is conducted twice. This patch deletes the redundancy code of ring enable, and integrates hnae_ae_ops.toggle_queue_status other functions to hns_ae_start. Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21net: hns: add get_coalesce_range api for hnsDaode Huang3-0/+40
This patch adds get_coalesce_range api for hns, it shows range of coalesce usecs and frames that can be set on this interface. Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21net: hns: fix bug of getting the wrong tcam dataDaode Huang1-4/+4
The current driver stores the high bit value of tcam data register to the tcam data low element, stores the low bit value of tcam data register to tcam data high element, this patch fixes this bug. Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21net: hns: add spin lock for tcam table operationDaode Huang2-0/+27
This patch adds spin lock for tcam table operation, there maybe a race condition happens when more than one thread try to change the tcam talbe entries. Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21net: hns: bugfix about pfc pause frame statisticsDaode Huang4-12/+81
For SoC hip06, PFC pause handled in dsaf, while hip05 in XGMAC, so change the statistics of pfc pause in dsaf and remove the old pfc pause frame statistics. Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21net: hns: fix the wrong speed for bondQianqian Xie2-20/+25
For debug-ports,there are two non-synchronized processes: Speed-Auto-Negotiation and Link-Update-Status. The two processes are towed by two different state machines. Bond reads the speed when link up, but the speed maybe not update the right value at that time.That make for bond's wrong speed. Thus only one state machine should be used and if phy_state_machine is used, it does not need to do hns_nic_update_link_status(). Signed-off-by: Qianqian Xie <xieqianqian@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21net: hns: fix ethtool loopback fail bugKejian Yan1-21/+14
When run ethtool cmd(ethtool -t ethx) again and again for a long time, it will be probabilistically fail. The PHYs' registers may be on different pages, so it must be switch to the right page before setting PHYs' registers. And __lb_up() calls phy_start() to startup the PHYs device, but this function may change Copper Control Register(Page 0, Register 0) to an other value. It would cause phy loopback test fail. if we remove phy_start(), we have to remove the relative phy_stop(), phy_disconnect() when doing phy loopback to keep the phy stay in right status. Reported-by: hejun <hjat2005@huawei.com> Signed-off-by: Kejian Yan <yankejian@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21net: hns: select Hilink before serdes loopback for HNS V2Kejian Yan1-6/+20
As Hilink3 and Hilink4 use the same xge training and xge u adaptor for HNSv2, it needs to select which Hilink to be set before relative serdes being configed. The hilink_access_sel is the register to do that. Signed-off-by: Kejian Yan <yankejian@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21net: hns: fix the error info when dma_set_mask_and_coherent failQianqian Xie1-1/+1
The error info should be printed as "set mask to 64bit fail!" instead of "set mask to 32bit fail!" in dma_set_mask_and_coherent(). Signed-off-by: Qianqian Xie <xieqianqian@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21net: hns: Remove unnecessary device resource freeQianqian Xie1-35/+4
The driver uses devm_ioremap_resource, it will unmap the map automatically, remove the unnecessary the resource free. Signed-off-by: Qianqian Xie <xieqianqian@huawei.com> Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21net: hns: typo fix of annotation info for hns_nic_reset_subtask()Qianqian Xie1-1/+1
The annotation info for hns_nic_reset_subtask() should be "for resetting subtask" instead of "for resetting suntask". Signed-off-by: Qianqian Xie <xieqianqian@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21net: hns: add skb_reset_mac_header() after skb being allocKejian Yan1-0/+1
HNS receives a packet without doing anything, but it should call skb_reset_mac_header() to initialize the header before using eth_hdr(). Fixes: 0d6b425a3773c3445b0f51b2f333821beaacb619 Signed-off-by: Kejian Yan <yankejian@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21net: hns: fix hns dsaf v1 dont support tx_pause closeQianqian Xie1-3/+3
For service port, hns dsaf v1 support to close tx_pause. However, the port will be invalid when it run command ethtool to close tx_pause. This patch will fix it. Signed-off-by: Qianqian Xie <xieqiaqian@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21net: hns: bug fix of ge reset sequenceQianqian Xie1-1/+5
The bit fileds of PPE reset register are different between HNS v1 and HNS v2, but the current procedure just only match HNS v1. Here is a patch to fix it. Signed-off-by: Kejian Yan <yankejian@huawei.com> Signed-off-by: Qianqian Xie <xieqianqian@huawei.com> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21net: dsa: mv88e6xxx: abstract switch registers accessesVivien Didelot2-60/+170
When the SMI address of the switch chip is zero, the chip assumes to be the only one on the SMI master bus and thus responds to all its known SMI devices addresses (port registers, Global2, etc.) When its SMI address is not zero, some chips (e.g. 88E6352) use an indirect access through two SMI Command and Data registers. Other models (e.g. 88E6060) using less than 16 internal SMI addresses always use a direct access. Add a capability flag to describe chips supporting the (indirect) Multi-chip Addressing Mode, and a low-level API to access the registers via SMI. Other accesses (like Ethernet management frames) may be added later. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21net: dsa: mv88e6xxx: add port base address to infoVivien Didelot2-1/+19
The switch ID is located at address 0x3 of every Port Registers bank. But not all Marvell switches have their Port Registers SMI Addresses starting at 0x10. 88E6060 starts at 0x8 and 88E6390 starts at 0x0. Add this data in the info structure and use it in the detection code. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21net: dsa: mv88e6xxx: pass compatible infoVivien Didelot1-1/+16
After allocating the chip structure, pass it a compatible info pointer. The compatible info structure will be used later to describe how to access the switch registers and where to read the switch ID. For the standard MDIO probe, get it from the device node data. For the legacy DSA driver probing, pass it the 88E6085 info. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21net: dsa: mv88e6xxx: add detection helperVivien Didelot1-34/+30
Extract the common detection code which assigns the info structure to the chip given the read switch ID. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21net: dsa: mv88e6xxx: add SMI init helperVivien Didelot1-5/+21
Add an helper function to isolate SMI specific assignments and checks. This function will later help choosing the different SMI accesses based of the compatible info. Since the chip structure is already allocated in the legacy probe, use the mv88e6xxx_reg_read access routine instead of __mv88e6xxx_reg_read. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21net: dsa: mv88e6xxx: add chip allocation helperVivien Didelot1-12/+27
Add an helper function to allocate the chip structure at the beginning of the probe functions. It will be used to initialize the SMI access. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21net: dsa: mv88e6xxx: rename smi_mutex to reg_lockVivien Didelot2-65/+62
The chip smi_mutex mutex is used to protect the access to the internal switch registers, not only the Multi-chip Addressing Mode, as commented. Since we will isolate SMI-specific pieces of code, avoid the confusion now by renaming smi_mutex to reg_lock. No functional changes here. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21net: dsa: mv88e6xxx: remove table args in info lookupVivien Didelot1-10/+6
The mv88e6xxx_table array and the mv88e6xxx_lookup_info function are static, so remove the table and size arguments from the lookup function. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21net: dsa: mv88e6xxx: use gpio get optional variantVivien Didelot1-10/+3
Use the optional variant to get the reset GPIO line, instead of checking for the -ENOENT error. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21net: dsa: mv88e6xxx: add switch register helpersVivien Didelot1-13/+28
The mixed assignments, allocations and registrations in the probe code make it hard to follow the logic and figure out what is DSA or chip specific. Extract the struct dsa_switch related code in a simple mv88e6xxx_register_switch helper function. For symmetry in the code, add a mv88e6xxx_unregister_switch function. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21net: dsa: mv88e6xxx: do not increment bus refcountVivien Didelot1-3/+0
The MDIO device probe and remove functions are respectively incrementing and decrementing the bus refcount themselves. Since these bus level actions are out of the device scope, remove them. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21net: dsa: mv88e6xxx: use already declared variablesVivien Didelot1-3/+3
In the MDIO probing function, dev is already assigned to &mdiodev->dev and np is already assigned to mdiodev->dev.of_node, so use them. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21net: dsa: mv88e6xxx: remove redundant assignmentsVivien Didelot1-3/+0
The chip->ds and ds->slave_mii_bus assignments are common to both legacy and new MDIO probing and are already done in the later setup code. Remove the duplicated assignments from the MDIO probing code. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-21net: dsa: mv88e6xxx: fix style issuesVivien Didelot1-19/+23
This patch fixes 5 style problems reported by checkpatch: WARNING: suspect code indent for conditional statements (8, 24) #492: FILE: drivers/net/dsa/mv88e6xxx.c:492: + if (phydev->link) + reg |= PORT_PCS_CTRL_LINK_UP; CHECK: Logical continuations should be on the previous line #1318: FILE: drivers/net/dsa/mv88e6xxx.c:1318: + oldstate == PORT_CONTROL_STATE_FORWARDING) + && (state == PORT_CONTROL_STATE_DISABLED || CHECK: multiple assignments should be avoided #1662: FILE: drivers/net/dsa/mv88e6xxx.c:1662: + vlan->vid_begin = vlan->vid_end = next.vid; WARNING: line over 80 characters #2097: FILE: drivers/net/dsa/mv88e6xxx.c:2097: + const struct switchdev_obj_port_vlan *vlan, WARNING: suspect code indent for conditional statements (16, 32) #2734: FILE: drivers/net/dsa/mv88e6xxx.c:2734: + if (mv88e6xxx_6352_family(ps) || mv88e6xxx_6351_family(ps) || [...] + reg |= PORT_CONTROL_EGRESS_ADD_TAG; total: 0 errors, 3 warnings, 2 checks, 3805 lines checked It also rebases and integrates changes sent by Ben Dooks [1]: The driver has a number of functions that are not exported or declared elsewhere, so make them static to avoid the following warnings from sparse: drivers/net/dsa/mv88e6xxx.c:113:5: warning: symbol 'mv88e6xxx_reg_read' was not declared. Should it be static? drivers/net/dsa/mv88e6xxx.c:167:5: warning: symbol 'mv88e6xxx_reg_write' was not declared. Should it be static? drivers/net/dsa/mv88e6xxx.c:231:5: warning: symbol 'mv88e6xxx_set_addr' was not declared. Should it be static? drivers/net/dsa/mv88e6xxx.c:367:6: warning: symbol 'mv88e6xxx_ppu_state_init' was not declared. Should it be static? drivers/net/dsa/mv88e6xxx.c:3157:5: warning: symbol 'mv88e6xxx_phy_page_read' was not declared. Should it be static? drivers/net/dsa/mv88e6xxx.c:3169:5: warning: symbol 'mv88e6xxx_phy_page_write' was not declared. Should it be static? drivers/net/dsa/mv88e6xxx.c:3583:26: warning: symbol 'mv88e6xxx_switch_driver' was not declared. Should it be static? drivers/net/dsa/mv88e6xxx.c:3621:5: warning: symbol 'mv88e6xxx_probe' was not declared. Should it be static? [1] http://patchwork.ozlabs.org/patch/632708/ Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-19net: ethernet: bcmsysport: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes1-20/+2
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-19net: ethernet: bcmsysport: use phydev from struct net_devicePhilippe Reynes2-18/+14
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phydev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-19net: ethernet: nb8800: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes1-22/+2
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Acked-by: Mans Rullgard <mans@mansr.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-19net: ethernet: nb8800: use phydev from struct net_devicePhilippe Reynes2-29/+29
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phydev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Acked-by: Mans Rullgard <mans@mansr.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-18ipv6: RFC 4884 partial support for SIT/GRE tunnelsEric Dumazet5-7/+34
When receiving an ICMPv4 message containing extensions as defined in RFC 4884, and translating it to ICMPv6 at SIT or GRE tunnel, we need some extra manipulation in order to properly forward the extensions. This patch only takes care of Time Exceeded messages as they are the ones that typically carry information from various routers in a fabric during a traceroute session. It also avoids complex skb logic if the data_len is not a multiple of 8. RFC states : The "original datagram" field MUST contain at least 128 octets. If the original datagram did not contain 128 octets, the "original datagram" field MUST be zero padded to 128 octets. In practice routers use 128 bytes of original datagram, not more. Initial translation was added in commit ca15a078bd90 ("sit: generate icmpv6 error when receiving icmpv4 error") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Oussama Ghorbel <ghorbel@pivasoftware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-18gre: better support for ICMP messages for gre+ipv6Eric Dumazet3-0/+8
ipgre_err() can call ip6_err_gen_icmpv6_unreach() for proper support of ipv4+gre+icmp+ipv6+... frames, used for example by traceroute/mtr. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-18ipv6: translate ICMP_TIME_EXCEEDED to ICMPV6_TIME_EXCEEDEric Dumazet3-7/+13
For better traceroute/mtr support for SIT and GRE tunnels, we translate IPV4 ICMP ICMP_TIME_EXCEEDED to ICMPV6_TIME_EXCEED We also have to translate the IPv4 source IP address of ICMP message to IPv6 v4mapped. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-18ip6: move ipip6_err_gen_icmpv6_unreach()Eric Dumazet3-37/+41
We want to use this helper from GRE as well, so this is the time to move it in net/ipv6/icmp.c Also add a @nhs parameter, since SIT and GRE have different values for the header(s) to skip. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-18ipv6: icmp: add a force_saddr param to icmp6_send()Eric Dumazet3-4/+8
SIT or GRE tunnels might want to translate an IPV4 address into a v4mapped one when translating ICMP to ICMPv6. This patch adds the parameter to icmp6_send() but does not change icmpv6_send() signature. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-18mwifiex: fix link error against sdioArnd Bergmann3-6/+15
Calling sdio_claim_host() from the interface independent part of the mwifiex driver is not only a layering violation, but also causes a link error if MMC support is disabled, or if CONFIG_MMC=m and CONFIG_MWIFIEX=y: drivers/net/built-in.o: In function `mwifiex_fw_dpc': :(.text+0xff138): undefined reference to `sdio_claim_host' :(.text+0xff158): undefined reference to `sdio_release_host' The right way to do this is to have the sdio specific code in the sdio driver front-end, and we already have a callback pointer that we can use for this after exporting the generic fw download function from the core driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 65c71efe1c59 ("mwifiex: fix racing condition when downloading firmware") Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.