| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Recently we found regression when running will_it_scale/page_fault3 test
on ARM64. Over 70% down for the multi processes cases and over 20% down
for the multi threads cases. It turns out the regression is caused by
commit 89b15332af7c ("mm: drop mmap_sem before calling
balance_dirty_pages() in write fault").
The test mmaps a memory size file then write to the mapping, this would
make all memory dirty and trigger dirty pages throttle, that upstream
commit would release mmap_sem then retry the page fault. The retried
page fault would see correct PTEs installed then just fall through to
spurious TLB flush. The regression is caused by the excessive spurious
TLB flush. It is fine on x86 since x86's spurious TLB flush is no-op.
We could just skip the spurious TLB flush to mitigate the regression.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Xu Yu <xuyu@linux.alibaba.com>
Debugged-by: Xu Yu <xuyu@linux.alibaba.com>
Tested-by: Xu Yu <xuyu@linux.alibaba.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Yang Shi <shy828301@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use the corresponding function "devm_kcalloc".
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Passing large uint32 sockaddr_qrtr.port numbers for port allocation
triggers a warning within idr_alloc() since the port number is cast
to int, and thus interpreted as a negative number. This leads to
the rejection of such valid port numbers in qrtr_port_assign() as
idr_alloc() fails.
To avoid the problem, switch to idr_alloc_u32() instead.
Fixes: bdabad3e363d ("net: Add Qualcomm IPC router")
Reported-by: syzbot+f31428628ef672716ea8@syzkaller.appspotmail.com
Signed-off-by: Necip Fazil Yildiran <necip@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
h1 is initially configured to reach h2 via r1 rather than the
more direct path through r2. If rp_filter is set and inherited
for r2, forwarding fails since the source address of h1 is
reachable from eth0 vs the packet coming to it via r1 and eth1.
Since rp_filter setting affects the test, explicitly reset it.
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
WeiXiong Liao noted to me offlist that his preference for email address
had changed and that he'd like it updated in the mailmap so people
discussing pstore/blk would be able to reach him.
Cc: WeiXiong Liao <gmpy.liaowx@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Several names had been recently appended (instead of inserted). While
git-shortlog doesn't need this file to be sorted, it helps humans to
keep it organized this way. Sort the entire file (which includes some
minor shuffling for dictionary order).
Done with the following commands:
grep -E '^(#|$)' .mailmap > .mailmap.head
grep -Ev '^(#|$)' .mailmap > .mailmap.body
sort -f .mailmap.body > .mailmap.body.sort
cat .mailmap.head .mailmap.body.sort > .mailmap
rm .mailmap.head .mailmap.body.sort
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
IA-64 is special and treats pgd_offset_k() differently to pgd_offset(),
using different formulae to calculate the indices into the kernel and user
PGDs. The index into the user PGDs takes into account the region number,
but the index into the kernel (init_mm) PGD always assumes a predefined
kernel region number. Commit 974b9b2c68f3 ("mm: consolidate pte_index() and
pte_offset_*() definitions") made IA-64 use a generic pgd_offset_k() which
incorrectly used pgd_index() for kernel page tables. As a result, the
index into the kernel PGD was going out of bounds and the kernel hung
during early boot.
Allow overrides of pgd_offset_k() and override it on IA-64 with the old
implementation that will correctly index the kernel PGD.
Fixes: 974b9b2c68f3 ("mm: consolidate pte_index() and pte_offset_*() definitions")
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
|
|
This reverts commit f8414a8d886b613b90d9fdf7cda6feea313b1069.
eth_type_trans() does the necessary pull on the skb.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix a kernel-doc warning for the pcs_config() function prototype:
../include/linux/phylink.h:406: warning: Excess function parameter 'permit_pause_to_mac' description in 'pcs_config'
Fixes: 7137e18f6f88 ("net: phylink: add struct phylink_pcs")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Impose a limit on the number of watches that a user can hold so that
they can't use this mechanism to fill up all the available memory.
This is done by putting a counter in user_struct that's incremented when
a watch is allocated and decreased when it is released. If the number
exceeds the RLIMIT_NOFILE limit, the watch is rejected with EAGAIN.
This can be tested by the following means:
(1) Create a watch queue and attach it to fd 5 in the program given - in
this case, bash:
keyctl watch_session /tmp/nlog /tmp/gclog 5 bash
(2) In the shell, set the maximum number of files to, say, 99:
ulimit -n 99
(3) Add 200 keyrings:
for ((i=0; i<200; i++)); do keyctl newring a$i @s || break; done
(4) Try to watch all of the keyrings:
for ((i=0; i<200; i++)); do echo $i; keyctl watch_add 5 %:a$i || break; done
This should fail when the number of watches belonging to the user hits
99.
(5) Remove all the keyrings and all of those watches should go away:
for ((i=0; i<200; i++)); do keyctl unlink %:a$i; done
(6) Kill off the watch queue by exiting the shell spawned by
watch_session.
Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This fix wasn't correct: When this function is invoked from the
retransmission worker, the iterator contains garbage and resetting
it causes a crash.
As the work queue should not be performance critical also zero the
msghdr struct.
Fixes: 35759383133f64d "(mptcp: sendmsg: reset iter on error)"
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is possible to trigger this WARN_ON from user space by triggering a
devlink snapshot with an ID which already exists. We don't need both
-EEXISTS being reported and spamming the kernel log.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When using ipv6_dev_find() in one module, it requires ipv6 not to
work as a module. Otherwise, this error occurs in build:
undefined reference to `ipv6_dev_find'.
So fix it by adding "depends on IPV6 || IPV6=n" to tipc/Kconfig,
as it does in sctp/Kconfig.
Fixes: 5a6f6f579178 ("tipc: set ub->ifindex for local ipv6 address")
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
__tipc_nl_compat_dumpit() has two callers, and it expects them to
pass a valid nlmsghdr via arg->data. This header is artificial and
crafted just for __tipc_nl_compat_dumpit().
tipc_nl_compat_publ_dump() does so by putting a genlmsghdr as well
as some nested attribute, TIPC_NLA_SOCK. But the other caller
tipc_nl_compat_dumpit() does not, this leaves arg->data uninitialized
on this call path.
Fix this by just adding a similar nlmsghdr without any payload in
tipc_nl_compat_dumpit().
This bug exists since day 1, but the recent commit 6ea67769ff33
("net: tipc: prepare attrs in __tipc_nl_compat_dumpit()") makes it
easier to appear.
Reported-and-tested-by: syzbot+0e7181deafa7e0b79923@syzkaller.appspotmail.com
Fixes: d0796d1ef63d ("tipc: convert legacy nl bearer dump to nl compat")
Cc: Jon Maloy <jmaloy@redhat.com>
Cc: Ying Xue <ying.xue@windriver.com>
Cc: Richard Alpe <richard.alpe@ericsson.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We may access the two bytes after vlan_hdr in vlan_set_encap_proto(). So
we should pull VLAN_HLEN + sizeof(unsigned short) in skb_vlan_untag() or
we may access the wrong data.
Fixes: 0d5501c1c828 ("net: Always untag vlan-tagged traffic on input.")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When an XDP program changes the ethernet header protocol field,
eth_type_trans is used to recalculate skb->protocol. In order for
eth_type_trans to work correctly, the ethernet header must actually be
part of the skb data segment, so the code first pushes that onto the
head of the skb. However, it subsequently forgets to pull it back off,
making the behavior of the passed-on packet inconsistent between the
protocol modifying case and the static protocol case. This patch fixes
the issue by simply pulling the ethernet header back off of the skb
head.
Fixes: 297249569932 ("net: fix generic XDP to handle if eth header was mangled")
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Processing NETDEV_FEAT_CHANGE causes IPvlan links to lose
NETIF_F_LLTX feature because of the incorrect handling of
features in ipvlan_fix_features().
--before--
lpaa10:~# ethtool -k ipvl0 | grep tx-lockless
tx-lockless: on [fixed]
lpaa10:~# ethtool -K ipvl0 tso off
Cannot change tcp-segmentation-offload
Actual changes:
vlan-challenged: off [fixed]
tx-lockless: off [fixed]
lpaa10:~# ethtool -k ipvl0 | grep tx-lockless
tx-lockless: off [fixed]
lpaa10:~#
--after--
lpaa10:~# ethtool -k ipvl0 | grep tx-lockless
tx-lockless: on [fixed]
lpaa10:~# ethtool -K ipvl0 tso off
Cannot change tcp-segmentation-offload
Could not change any device features
lpaa10:~# ethtool -k ipvl0 | grep tx-lockless
tx-lockless: on [fixed]
lpaa10:~#
Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.")
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When we tear down a network namespace, we unregister all
the netdevices within it. So we may queue a slave device
and a bonding device together in the same unregister queue.
If the only slave device is non-ethernet, it would
automatically unregister the bonding device as well. Thus,
we may end up unregistering the bonding device twice.
Workaround this special case by checking reg_state.
Fixes: 9b5e383c11b0 ("net: Introduce unregister_netdevice_many()")
Reported-by: syzbot+af23e7f3e0a7e10c8b67@syzkaller.appspotmail.com
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
Commit 1355c31eeb7e ("asm-generic: pgalloc: provide generic pmd_alloc_one()
and pmd_free_one()") converted parisc to use generic version of
pmd_alloc_one() but it missed the fact that parisc uses order-1 pages for
PMD.
Restore the original version of pmd_alloc_one() for parisc, just use
GFP_PGTABLE_KERNEL that implies __GFP_ZERO instead of GFP_KERNEL and
memset.
Fixes: 1355c31eeb7e ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()")
Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Meelis Roos <mroos@linux.ee>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lkml.kernel.org/r/9f2b5ebd-e4a4-0fa1-6cd3-4b9f6892d1ad@linux.ee
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
One case was missed in the short IO retry handling, and that's hitting
-EAGAIN on a blocking attempt read (eg from io-wq context). This is a
problem on sockets that are marked as non-blocking when created, they
don't carry any REQ_F_NOWAIT information to help us terminate them
instead of perpetually retrying.
Fixes: 227c0c9673d8 ("io_uring: internally retry short reads")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There's a bit of confusion on the matching pairs of poll vs double poll,
depending on if the request is a pure poll (IORING_OP_POLL_ADD) or
poll driven retry.
Add io_poll_get_double() that returns the double poll waitqueue, if any,
and io_poll_get_single() that returns the original poll waitqueue. With
that, remove the argument to io_poll_remove_double().
Finally ensure that wait->private is cleared once the double poll handler
has run, so that remove knows it's already been seen.
Cc: stable@vger.kernel.org # v5.8
Reported-by: syzbot+7f617d4a9369028b8a2c@syzkaller.appspotmail.com
Fixes: 18bceab101ad ("io_uring: allow POLL_ADD with double poll_wait() users")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
According to SAE J1939/21 (Chapter 5.12.3 and APPENDIX C), for transmit side
the required time interval between packets of a multipacket broadcast message
is 50 to 200 ms, the responder shall use a timeout of 250ms (provides margin
allowing for the maximumm spacing of 200ms). For receive side a timeout will
occur when a time of greater than 750 ms elapsed between two message packets
when more packets were expected.
So this patch fix and add rxtimer for multipacket broadcast session.
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1596599425-5534-5-git-send-email-zhangchangzhong@huawei.com
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
If timeout occurs, j1939_tp_rxtimer() first calls hrtimer_start() to restart
rxtimer, and then calls __j1939_session_cancel() to set session->state =
J1939_SESSION_WAITING_ABORT. At next timeout expiration, because of the
J1939_SESSION_WAITING_ABORT session state j1939_tp_rxtimer() will call
j1939_session_deactivate_activate_next() to deactivate current session, and
rxtimer won't be set.
But for multipacket broadcast session, __j1939_session_cancel() don't set
session->state = J1939_SESSION_WAITING_ABORT, thus current session won't be
deactivate and hrtimer_start() is called to start new rxtimer again and again.
So fix it by moving session->state = J1939_SESSION_WAITING_ABORT out of if
(!j1939_cb_is_broadcast(&session->skcb)) statement.
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1596599425-5534-4-git-send-email-zhangchangzhong@huawei.com
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
If j1939_xtp_rx_dat_one() receive last frame of multipacket broadcast message,
j1939_session_timers_cancel() should be called to cancel rxtimer.
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1596599425-5534-3-git-send-email-zhangchangzhong@huawei.com
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Currently j1939_tp_im_involved_anydir() in j1939_tp_recv() check the previously
set flags J1939_ECU_LOCAL_DST and J1939_ECU_LOCAL_SRC of incoming skb, thus
multipacket broadcast message was aborted by receive side because it may come
from remote ECUs and have no exact dst address. Similarly, j1939_tp_cmd_recv()
and j1939_xtp_rx_dat() didn't process broadcast message.
So fix it by checking and process broadcast message in j1939_tp_recv(),
j1939_tp_cmd_recv() and j1939_xtp_rx_dat().
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1596599425-5534-2-git-send-email-zhangchangzhong@huawei.com
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This variable is present in many source files and has not been used
anywhere (at least internally) since it was introduced.
Fixes the following W=1 kernel build warning(s):
drivers/net/fddi/skfp/cfm.c: In function ‘cfm’:
drivers/net/fddi/skfp/cfm.c:211:6: warning: variable ‘oldstate’ set but not used [-Wunused-but-set-variable]
drivers/net/fddi/skfp/cfm.c:40:19: warning: ‘ID_sccs’ defined but not used [-Wunused-const-variable=]
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While we're at it, remove some code which has never been invoked.
Keep the comment though, as it seems potentially half useful.
Fixes the following W=1 kernel build warning(s):
drivers/net/fddi/skfp/cfm.c: In function ‘cfm’:
drivers/net/fddi/skfp/cfm.c:211:6: warning: variable ‘oldstate’ set but not used [-Wunused-but-set-variable]
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This variable is present in many source files and has not been used
anywhere (at least internally) since it was introduced.
Fixes the following W=1 kernel build warning(s):
drivers/net/fddi/skfp/smt.c:24:19: warning: ‘ID_sccs’ defined but not used [-Wunused-const-variable=]
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The variable 'smt_pdef' is only used if LITTLE_ENDIAN is set, so only
define it if this is the case.
Fixes the following W=1 kernel build warning(s):
drivers/net/fddi/skfp/smt.c:1572:3: warning: ‘smt_pdef’ defined but not used [-Wunused-const-variable=]
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This variable is present in many source files and has not been used
anywhere (at least internally) since it was introduced.
Fixes the following W=1 kernel build warning(s):
drivers/net/fddi/skfp/fplustm.c:25:19: warning: ‘ID_sccs’ defined but not used [-Wunused-const-variable=]
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: netdev@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This variable is present in many source files and has not been used
anywhere (at least internally) since it was introduced.
Fixes the following W=1 kernel build warning(s):
drivers/net/fddi/skfp/hwmtm.c:14:19: warning: ‘ID_sccs’ defined but not used [-Wunused-const-variable=]
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/net/wan/dlci.c: In function ‘dlci_close’:
drivers/net/wan/dlci.c:298:8: warning: variable ‘err’ set but not used [-Wunused-but-set-variable]
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Mike McLagan <mike.mclagan@linux.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/net/ethernet/8390/axnet_cs.c:907: warning: Function parameter or member 'txqueue' not described in 'axnet_tx_timeout'
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Martin Habets <mhabets@solarflare.com>
Cc: Shannon Nelson <snelson@pensando.io>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: William Lee <william@asix.com.tw>
Cc: "A. Hinds --" <dahinds@users.sourceforge.net>
Cc: reached at <becker@scyld.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/net/bonding/bond_alb.c:1222: warning: Function parameter or member 'bond' not described in 'alb_set_mac_address'
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/net/ethernet/3com/3c574_cs.c: In function ‘update_stats’:
drivers/net/ethernet/3com/3c574_cs.c:954:9: warning: variable ‘tx’ set but not used [-Wunused-but-set-variable]
954 | u8 rx, tx, up;
| ^~
drivers/net/ethernet/3com/3c574_cs.c:954:5: warning: variable ‘rx’ set but not used [-Wunused-but-set-variable]
954 | u8 rx, tx, up;
| ^~
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Shannon Nelson <snelson@pensando.io>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Martin Habets <mhabets@solarflare.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Donald Becker <becker@scyld.com>
Cc: David Hinds <dahinds@users.sourceforge.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/net/bonding/bond_main.c:329: warning: Function parameter or member 'proto' not described in 'bond_vlan_rx_add_vid'
drivers/net/bonding/bond_main.c:362: warning: Function parameter or member 'proto' not described in 'bond_vlan_rx_kill_vid'
drivers/net/bonding/bond_main.c:964: warning: Function parameter or member 'new_active' not described in 'bond_change_active_slave'
drivers/net/bonding/bond_main.c:964: warning: Excess function parameter 'new' description in 'bond_change_active_slave'
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Thomas Davis <tadavis@lbl.gov>
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Renames and missing descriptions.
Fixes the following W=1 kernel build warning(s):
drivers/net/bonding/bond_3ad.c:140: warning: Function parameter or member 'port' not described in '__get_first_agg'
drivers/net/bonding/bond_3ad.c:140: warning: Excess function parameter 'bond' description in '__get_first_agg'
drivers/net/bonding/bond_3ad.c:1655: warning: Function parameter or member 'agg' not described in 'ad_agg_selection_logic'
drivers/net/bonding/bond_3ad.c:1655: warning: Excess function parameter 'aggregator' description in 'ad_agg_selection_logic'
drivers/net/bonding/bond_3ad.c:1817: warning: Function parameter or member 'port' not described in 'ad_initialize_port'
drivers/net/bonding/bond_3ad.c:1817: warning: Excess function parameter 'aggregator' description in 'ad_initialize_port'
drivers/net/bonding/bond_3ad.c:1976: warning: Function parameter or member 'timeout' not described in 'bond_3ad_initiate_agg_selection'
drivers/net/bonding/bond_3ad.c:2274: warning: Function parameter or member 'work' not described in 'bond_3ad_state_machine_handler'
drivers/net/bonding/bond_3ad.c:2274: warning: Excess function parameter 'bond' description in 'bond_3ad_state_machine_handler'
drivers/net/bonding/bond_3ad.c:2508: warning: Function parameter or member 'link' not described in 'bond_3ad_handle_link_change'
drivers/net/bonding/bond_3ad.c:2508: warning: Excess function parameter 'status' description in 'bond_3ad_handle_link_change'
drivers/net/bonding/bond_3ad.c:2566: warning: Function parameter or member 'bond' not described in 'bond_3ad_set_carrier'
drivers/net/bonding/bond_3ad.c:2677: warning: Function parameter or member 'bond' not described in 'bond_3ad_update_lacp_rate'
drivers/net/bonding/bond_3ad.c:1655: warning: Function parameter or member 'agg' not described in 'ad_agg_selection_logic'
drivers/net/bonding/bond_3ad.c:1655: warning: Excess function parameter 'aggregator' description in 'ad_agg_selection_logic'
drivers/net/bonding/bond_3ad.c:1817: warning: Function parameter or member 'port' not described in 'ad_initialize_port'
drivers/net/bonding/bond_3ad.c:1817: warning: Excess function parameter 'aggregator' description in 'ad_initialize_port'
drivers/net/bonding/bond_3ad.c:1976: warning: Function parameter or member 'timeout' not described in 'bond_3ad_initiate_agg_selection'
drivers/net/bonding/bond_3ad.c:2274: warning: Function parameter or member 'work' not described in 'bond_3ad_state_machine_handler'
drivers/net/bonding/bond_3ad.c:2274: warning: Excess function parameter 'bond' description in 'bond_3ad_state_machine_handler'
drivers/net/bonding/bond_3ad.c:2508: warning: Function parameter or member 'link' not described in 'bond_3ad_handle_link_change'
drivers/net/bonding/bond_3ad.c:2508: warning: Excess function parameter 'status' description in 'bond_3ad_handle_link_change'
drivers/net/bonding/bond_3ad.c:2566: warning: Function parameter or member 'bond' not described in 'bond_3ad_set_carrier'
drivers/net/bonding/bond_3ad.c:2677: warning: Function parameter or member 'bond' not described in 'bond_3ad_update_lacp_rate'
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
1. Added a skb->len check
This driver expects upper layers to include a pseudo header of 1 byte
when passing down a skb for transmission. This driver will read this
1-byte header. This patch added a skb->len check before reading the
header to make sure the header exists.
2. Added needed_headroom and set hard_header_len to 0
When this driver transmits data,
first this driver will remove a pseudo header of 1 byte,
then the lapb module will prepend the LAPB header of 2 or 3 bytes.
So the value of needed_headroom in this driver should be 3 - 1.
Because this driver has no header_ops, according to the logic of
af_packet.c, the value of hard_header_len should be 0.
Reason of setting needed_headroom and hard_header_len at this place:
This driver is written using the API of the hdlc module, the hdlc
module enables this driver (the protocol driver) to run on any hardware
that has a driver (the hardware driver) written using the API of the
hdlc module.
Two other hdlc protocol drivers - hdlc_ppp and hdlc_raw_eth, also set
things like hard_header_len at this place. In hdlc_ppp, it sets
hard_header_len after attach_hdlc_protocol and before setting dev->type.
In hdlc_raw_eth, it sets hard_header_len by calling ether_setup after
attach_hdlc_protocol and after memcpy the settings.
3. Reset needed_headroom when detaching protocols (in hdlc.c)
When detaching a protocol from a hardware device, the hdlc module will
reset various parameters of the device (including hard_header_len) to
the default values. We add needed_headroom here so that needed_headroom
will also be reset.
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Cc: Martin Schiller <ms@dev.tdt.de>
Cc: Andrew Hendry <andrew.hendry@gmail.com>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Broadcast mode bonds transmit a copy of all traffic simultaneously out of
all interfaces, so the "speed" of the bond isn't really the aggregate of
all interfaces, but rather, the speed of the slowest active interface.
Also, the type of the speed field is u32, not unsigned long, so adjust
that accordingly, as required to make min() function here without
complaining about mismatching types.
Fixes: bb5b052f751b ("bond: add support to read speed and duplex via ethtool")
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: "David S. Miller" <davem@davemloft.net>
CC: netdev@vger.kernel.org
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ioreadX() helpers have inconsistent interface. On some architectures
void *__iomem address argument is a pointer to const, on some not.
Implementations of ioreadX() do not modify the memory under the address so
they can be converted to a "const" version for const-safety and
consistency among architectures.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Allen Hubbe <allenbh@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200709072837.5869-5-krzk@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The ioreadX() helpers have inconsistent interface. On some architectures
void *__iomem address argument is a pointer to const, on some not.
Implementations of ioreadX() do not modify the memory under the address so
they can be converted to a "const" version for const-safety and
consistency among architectures.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Cc: Allen Hubbe <allenbh@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200709072837.5869-4-krzk@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The ioreadX() helpers have inconsistent interface. On some architectures
void *__iomem address argument is a pointer to const, on some not.
Implementations of ioreadX() do not modify the memory under the address so
they can be converted to a "const" version for const-safety and
consistency among architectures.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Cc: Allen Hubbe <allenbh@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200709072837.5869-3-krzk@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "iomap: Constify ioreadX() iomem argument", v3.
The ioread8/16/32() and others have inconsistent interface among the
architectures: some taking address as const, some not.
It seems there is nothing really stopping all of them to take pointer to
const.
This patch (of 4):
The ioreadX() and ioreadX_rep() helpers have inconsistent interface. On
some architectures void *__iomem address argument is a pointer to const,
on some not.
Implementations of ioreadX() do not modify the memory under the address so
they can be converted to a "const" version for const-safety and
consistency among architectures.
[krzk@kernel.org: sh: clk: fix assignment from incompatible pointer type for ioreadX()]
Link: http://lkml.kernel.org/r/20200723082017.24053-1-krzk@kernel.org
[akpm@linux-foundation.org: fix drivers/mailbox/bcm-pdc-mailbox.c]
Link: http://lkml.kernel.org/r/202007132209.Rxmv4QyS%25lkp@intel.com
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Allen Hubbe <allenbh@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Link: http://lkml.kernel.org/r/20200709072837.5869-1-krzk@kernel.org
Link: http://lkml.kernel.org/r/20200709072837.5869-2-krzk@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Current SH will get below warning at strncpy()
In file included from ${LINUX}/arch/sh/include/asm/string.h:3,
from ${LINUX}/include/linux/string.h:20,
from ${LINUX}/include/linux/bitmap.h:9,
from ${LINUX}/include/linux/nodemask.h:95,
from ${LINUX}/include/linux/mmzone.h:17,
from ${LINUX}/include/linux/gfp.h:6,
from ${LINUX}/innclude/linux/slab.h:15,
from ${LINUX}/linux/drivers/mmc/host/vub300.c:38:
${LINUX}/drivers/mmc/host/vub300.c: In function 'new_system_port_status':
${LINUX}/arch/sh/include/asm/string_32.h:51:42: warning: array subscript\
80 is above array bounds of 'char[26]' [-Warray-bounds]
: "0" (__dest), "1" (__src), "r" (__src+__n)
~~~~~^~~~
In general, strncpy() should behave like below.
char dest[10];
char *src = "12345";
strncpy(dest, src, 10);
// dest = {'1', '2', '3', '4', '5',
'\0','\0','\0','\0','\0'}
But, current SH strnpy() has 2 issues.
1st is it will access to out-of-memory (= src + 10).
2nd is it needs big fixup for it, and maintenance __asm__
code is difficult.
To solve these issues, this patch simply uses generic strncpy()
instead of architecture specific one.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alan Modra <amodra@gmail.com>
Cc: Bin Meng <bin.meng@windriver.com>
Cc: Chen Zhou <chenzhou10@huawei.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://marc.info/?l=linux-renesas-soc&m=157664657013309
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
SH will get below warning
${LINUX}/drivers/sh/clk/cpg.c: In function 'r8':
${LINUX}/drivers/sh/clk/cpg.c:41:17: warning: passing argument 1 of 'ioread8'
discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
return ioread8(addr);
^~~~
In file included from ${LINUX}/arch/sh/include/asm/io.h:21,
from ${LINUX}/include/linux/io.h:13,
from ${LINUX}/drivers/sh/clk/cpg.c:14:
${LINUX}/include/asm-generic/iomap.h:29:29: note: expected 'void *' but
argument is of type 'const void *'
extern unsigned int ioread8(void __iomem *);
^~~~~~~~~~~~~~
We don't need "const" for r8/r16/r32. And we don't need r8/r16/r32
themselvs. This patch cleanup these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alan Modra <amodra@gmail.com>
Cc: Bin Meng <bin.meng@windriver.com>
Cc: Chen Zhou <chenzhou10@huawei.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
X-MARC-Message: https://marc.info/?l=linux-renesas-soc&m=157852973916903
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since the patch [1], building the kernel using a toolchain built with
binutils 2.33.1 prevents booting a sh4 system under Qemu. Apply the patch
provided by Alan Modra [2] that fix alignment of rodata.
[1] https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;h=ebd2263ba9a9124d93bbc0ece63d7e0fae89b40e
[2] https://www.sourceware.org/ml/binutils/2019-12/msg00112.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alan Modra <amodra@gmail.com>
Cc: Bin Meng <bin.meng@windriver.com>
Cc: Chen Zhou <chenzhou10@huawei.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: <stable@vger.kernel.org>
Link: https://marc.info/?l=linux-sh&m=158429470221261
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
BUG: KCSAN: data-race in page_cpupid_xchg_last / put_page
write (marked) to 0xfffffc0d48ec1a00 of 8 bytes by task 91442 on cpu 3:
page_cpupid_xchg_last+0x51/0x80
page_cpupid_xchg_last at mm/mmzone.c:109 (discriminator 11)
wp_page_reuse+0x3e/0xc0
wp_page_reuse at mm/memory.c:2453
do_wp_page+0x472/0x7b0
do_wp_page at mm/memory.c:2798
__handle_mm_fault+0xcb0/0xd00
handle_pte_fault at mm/memory.c:4049
(inlined by) __handle_mm_fault at mm/memory.c:4163
handle_mm_fault+0xfc/0x2f0
handle_mm_fault at mm/memory.c:4200
do_page_fault+0x263/0x6f9
do_user_addr_fault at arch/x86/mm/fault.c:1465
(inlined by) do_page_fault at arch/x86/mm/fault.c:1539
page_fault+0x34/0x40
read to 0xfffffc0d48ec1a00 of 8 bytes by task 94817 on cpu 69:
put_page+0x15a/0x1f0
page_zonenum at include/linux/mm.h:923
(inlined by) is_zone_device_page at include/linux/mm.h:929
(inlined by) page_is_devmap_managed at include/linux/mm.h:948
(inlined by) put_page at include/linux/mm.h:1023
wp_page_copy+0x571/0x930
wp_page_copy at mm/memory.c:2615
do_wp_page+0x107/0x7b0
__handle_mm_fault+0xcb0/0xd00
handle_mm_fault+0xfc/0x2f0
do_page_fault+0x263/0x6f9
page_fault+0x34/0x40
Reported by Kernel Concurrency Sanitizer on:
CPU: 69 PID: 94817 Comm: systemd-udevd Tainted: G W O L 5.5.0-next-20200204+ #6
Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019
A page never changes its zone number. The zone number happens to be
stored in the same word as other bits which are modified, but the zone
number bits will never be modified by any other write, so it can accept
a reload of the zone bits after an intervening write and it don't need
to use READ_ONCE(). Thus, annotate this data race using
ASSERT_EXCLUSIVE_BITS() to also assert that there are no concurrent
writes to it.
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Link: http://lkml.kernel.org/r/1581619089-14472-1-git-send-email-cai@lca.pw
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Read to lru_add_pvec->nr could be interrupted and then write to the same
variable. The write has local interrupt disabled, but the plain reads
result in data races. However, it is unlikely the compilers could do much
damage here given that lru_add_pvec->nr is a "unsigned char" and there is
an existing compiler barrier. Thus, annotate the reads using the
data_race() macro. The data races were reported by KCSAN,
BUG: KCSAN: data-race in lru_add_drain_cpu / rotate_reclaimable_page
write to 0xffff9291ebcb8a40 of 1 bytes by interrupt on cpu 23:
rotate_reclaimable_page+0x2df/0x490
pagevec_add at include/linux/pagevec.h:81
(inlined by) rotate_reclaimable_page at mm/swap.c:259
end_page_writeback+0x1b5/0x2b0
end_swap_bio_write+0x1d0/0x280
bio_endio+0x297/0x560
dec_pending+0x218/0x430 [dm_mod]
clone_endio+0xe4/0x2c0 [dm_mod]
bio_endio+0x297/0x560
blk_update_request+0x201/0x920
scsi_end_request+0x6b/0x4a0
scsi_io_completion+0xb7/0x7e0
scsi_finish_command+0x1ed/0x2a0
scsi_softirq_done+0x1c9/0x1d0
blk_done_softirq+0x181/0x1d0
__do_softirq+0xd9/0x57c
irq_exit+0xa2/0xc0
do_IRQ+0x8b/0x190
ret_from_intr+0x0/0x42
delay_tsc+0x46/0x80
__const_udelay+0x3c/0x40
__udelay+0x10/0x20
kcsan_setup_watchpoint+0x202/0x3a0
__tsan_read1+0xc2/0x100
lru_add_drain_cpu+0xb8/0x3f0
lru_add_drain+0x25/0x40
shrink_active_list+0xe1/0xc80
shrink_lruvec+0x766/0xb70
shrink_node+0x2d6/0xca0
do_try_to_free_pages+0x1f7/0x9a0
try_to_free_pages+0x252/0x5b0
__alloc_pages_slowpath+0x458/0x1290
__alloc_pages_nodemask+0x3bb/0x450
alloc_pages_vma+0x8a/0x2c0
do_anonymous_page+0x16e/0x6f0
__handle_mm_fault+0xcd5/0xd40
handle_mm_fault+0xfc/0x2f0
do_page_fault+0x263/0x6f9
page_fault+0x34/0x40
read to 0xffff9291ebcb8a40 of 1 bytes by task 37761 on cpu 23:
lru_add_drain_cpu+0xb8/0x3f0
lru_add_drain_cpu at mm/swap.c:602
lru_add_drain+0x25/0x40
shrink_active_list+0xe1/0xc80
shrink_lruvec+0x766/0xb70
shrink_node+0x2d6/0xca0
do_try_to_free_pages+0x1f7/0x9a0
try_to_free_pages+0x252/0x5b0
__alloc_pages_slowpath+0x458/0x1290
__alloc_pages_nodemask+0x3bb/0x450
alloc_pages_vma+0x8a/0x2c0
do_anonymous_page+0x16e/0x6f0
__handle_mm_fault+0xcd5/0xd40
handle_mm_fault+0xfc/0x2f0
do_page_fault+0x263/0x6f9
page_fault+0x34/0x40
2 locks held by oom02/37761:
#0: ffff9281e5928808 (&mm->mmap_sem#2){++++}, at: do_page_fault
#1: ffffffffb3ade380 (fs_reclaim){+.+.}, at: fs_reclaim_acquire.part
irq event stamp: 1949217
trace_hardirqs_on_thunk+0x1a/0x1c
__do_softirq+0x2e7/0x57c
__do_softirq+0x34c/0x57c
irq_exit+0xa2/0xc0
Reported by Kernel Concurrency Sanitizer on:
CPU: 23 PID: 37761 Comm: oom02 Not tainted 5.6.0-rc3-next-20200226+ #6
Hardware name: HP ProLiant BL660c Gen9, BIOS I38 10/17/2018
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Marco Elver <elver@google.com>
Link: http://lkml.kernel.org/r/20200228044018.1263-1-cai@lca.pw
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
mm->tlb_flush_batched could be accessed concurrently as noticed by
KCSAN,
BUG: KCSAN: data-race in flush_tlb_batched_pending / try_to_unmap_one
write to 0xffff93f754880bd0 of 1 bytes by task 822 on cpu 6:
try_to_unmap_one+0x59a/0x1ab0
set_tlb_ubc_flush_pending at mm/rmap.c:635
(inlined by) try_to_unmap_one at mm/rmap.c:1538
rmap_walk_anon+0x296/0x650
rmap_walk+0xdf/0x100
try_to_unmap+0x18a/0x2f0
shrink_page_list+0xef6/0x2870
shrink_inactive_list+0x316/0x880
shrink_lruvec+0x8dc/0x1380
shrink_node+0x317/0xd80
balance_pgdat+0x652/0xd90
kswapd+0x396/0x8d0
kthread+0x1e0/0x200
ret_from_fork+0x27/0x50
read to 0xffff93f754880bd0 of 1 bytes by task 6364 on cpu 4:
flush_tlb_batched_pending+0x29/0x90
flush_tlb_batched_pending at mm/rmap.c:682
change_p4d_range+0x5dd/0x1030
change_pte_range at mm/mprotect.c:44
(inlined by) change_pmd_range at mm/mprotect.c:212
(inlined by) change_pud_range at mm/mprotect.c:240
(inlined by) change_p4d_range at mm/mprotect.c:260
change_protection+0x222/0x310
change_prot_numa+0x3e/0x60
task_numa_work+0x219/0x350
task_work_run+0xed/0x140
prepare_exit_to_usermode+0x2cc/0x2e0
ret_from_intr+0x32/0x42
Reported by Kernel Concurrency Sanitizer on:
CPU: 4 PID: 6364 Comm: mtest01 Tainted: G W L 5.5.0-next-20200210+ #5
Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019
flush_tlb_batched_pending() is under PTL but the write is not, but
mm->tlb_flush_batched is only a bool type, so the value is unlikely to be
shattered. Thus, mark it as an intentional data race by using the data
race macro.
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Marco Elver <elver@google.com>
Link: http://lkml.kernel.org/r/1581450783-8262-1-git-send-email-cai@lca.pw
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
Yang Shi
Xu Wang
Necip Fazil Yildiran
David Ahern
Kees Cook
Jessica Clarke
David S. Miller
Randy Dunlap
David Howells
Florian Westphal
Andrew Lunn
Xin Long
Cong Wang
Miaohe Lin
Jason A. Donenfeld
Mahesh Bandewar
Linus Torvalds
Mike Rapoport
Jens Axboe
Zhang Changzhong
Lee Jones
Xie He
Jarod Wilson
Krzysztof Kozlowski
Kuninori Morimoto
Romain Naour
Qian Cai