aboutsummaryrefslogtreecommitdiffstats
path: root/scripts/gdb/linux/utils.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2022-01-19ipv4: avoid quadratic behavior in netns dismantleEric Dumazet1-19/+17
net/ipv4/fib_semantics.c uses an hash table of 256 slots, keyed by device ifindexes: fib_info_devhash[DEVINDEX_HASHSIZE] Problem is that with network namespaces, devices tend to use the same ifindex. lo device for instance has a fixed ifindex of one, for all network namespaces. This means that hosts with thousands of netns spend a lot of time looking at some hash buckets with thousands of elements, notably at netns dismantle. Simply add a per netns perturbation (net_hash_mix()) to spread elements more uniformely. Also change fib_devindex_hashfn() to use more entropy. Fixes: aa79e66eee5d ("net: Make ifindex generation per-net namespace") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-19net/fsl: xgmac_mdio: Fix incorrect iounmap when removing moduleTobias Waldekranz1-1/+2
As reported by sparse: In the remove path, the driver would attempt to unmap its own priv pointer - instead of the io memory that it mapped in probe. Fixes: 9f35a7342cff ("net/fsl: introduce Freescale 10G MDIO driver") Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-19powerpc/fsl/dts: Enable WA for erratum A-009885 on fman3l MDIO busesTobias Waldekranz1-0/+2
This block is used in (at least) T1024 and T1040, including their variants like T1023 etc. Fixes: d55ad2967d89 ("powerpc/mpc85xx: Create dts components for the FSL QorIQ DPAA FMan") Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-19dt-bindings: net: Document fsl,erratum-a009885Tobias Waldekranz1-0/+9
Update FMan binding documentation with the newly added workaround for erratum A-009885. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-19net/fsl: xgmac_mdio: Add workaround for erratum A-009885Tobias Waldekranz1-6/+19
Once an MDIO read transaction is initiated, we must read back the data register within 16 MDC cycles after the transaction completes. Outside of this window, reads may return corrupt data. Therefore, disable local interrupts in the critical section, to maximize the probability that we can satisfy this requirement. Fixes: d55ad2967d89 ("powerpc/mpc85xx: Create dts components for the FSL QorIQ DPAA FMan") Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-19net: mscc: ocelot: fix using match before it is setTom Rix1-7/+8
Clang static analysis reports this issue ocelot_flower.c:563:8: warning: 1st function call argument is an uninitialized value !is_zero_ether_addr(match.mask->dst)) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The variable match is used before it is set. So move the block. Fixes: 75944fda1dfe ("net: mscc: ocelot: offload ingress skbedit and vlan actions to VCAP IS1") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-19net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devicesClaudiu Beznea1-18/+18
On a setup with KSZ9131 and MACB drivers it happens on suspend path, from time to time, that the PHY interrupt arrives after PHY and MACB were suspended (PHY via genphy_suspend(), MACB via macb_suspend()). In this case the phy_read() at the beginning of kszphy_handle_interrupt() will fail (as MACB driver is suspended at this time) leading to phy_error() being called and a stack trace being displayed on console. To solve this .suspend/.resume functions for all KSZ devices implementing .handle_interrupt were replaced with kszphy_suspend()/kszphy_resume() which disable/enable interrupt before/after calling genphy_suspend()/genphy_resume(). The fix has been adapted for all KSZ devices which implements .handle_interrupt but it has been tested only on KSZ9131. Fixes: 59ca4e58b917 ("net: phy: micrel: implement generic .handle_interrupt() callback") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-19net: cpsw: avoid alignment faults by taking NET_IP_ALIGN into accountArd Biesheuvel3-7/+7
Both versions of the CPSW driver declare a CPSW_HEADROOM_NA macro that takes NET_IP_ALIGN into account, but fail to use it appropriately when storing incoming packets in memory. This results in the IPv4 source and destination addresses to appear misaligned in memory, which causes aligment faults that need to be fixed up in software. So let's switch from CPSW_HEADROOM to CPSW_HEADROOM_NA where needed. This gets rid of any alignment faults on the RX path on a Beaglebone White. Fixes: 9ed4050c0d75 ("net: ethernet: ti: cpsw: add XDP support") Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-19nfc: llcp: fix NULL error pointer dereference on sendmsg() after failed bind()Krzysztof Kozlowski1-0/+5
Syzbot detected a NULL pointer dereference of nfc_llcp_sock->dev pointer (which is a 'struct nfc_dev *') with calls to llcp_sock_sendmsg() after a failed llcp_sock_bind(). The message being sent is a SOCK_DGRAM. KASAN report: BUG: KASAN: null-ptr-deref in nfc_alloc_send_skb+0x2d/0xc0 Read of size 4 at addr 00000000000005c8 by task llcp_sock_nfc_a/899 CPU: 5 PID: 899 Comm: llcp_sock_nfc_a Not tainted 5.16.0-rc6-next-20211224-00001-gc6437fbf18b0 #125 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x45/0x59 ? nfc_alloc_send_skb+0x2d/0xc0 __kasan_report.cold+0x117/0x11c ? mark_lock+0x480/0x4f0 ? nfc_alloc_send_skb+0x2d/0xc0 kasan_report+0x38/0x50 nfc_alloc_send_skb+0x2d/0xc0 nfc_llcp_send_ui_frame+0x18c/0x2a0 ? nfc_llcp_send_i_frame+0x230/0x230 ? __local_bh_enable_ip+0x86/0xe0 ? llcp_sock_connect+0x470/0x470 ? llcp_sock_connect+0x470/0x470 sock_sendmsg+0x8e/0xa0 ____sys_sendmsg+0x253/0x3f0 ... The issue was visible only with multiple simultaneous calls to bind() and sendmsg(), which resulted in most of the bind() calls to fail. The bind() was failing on checking if there is available WKS/SDP/SAP (respective bit in 'struct nfc_llcp_local' fields). When there was no available WKS/SDP/SAP, the bind returned error but the sendmsg() to such socket was able to trigger mentioned NULL pointer dereference of nfc_llcp_sock->dev. The code looks simply racy and currently it protects several paths against race with checks for (!nfc_llcp_sock->local) which is NULL-ified in error paths of bind(). The llcp_sock_sendmsg() did not have such check but called function nfc_llcp_send_ui_frame() had, although not protected with lock_sock(). Therefore the race could look like (same socket is used all the time): CPU0 CPU1 ==== ==== llcp_sock_bind() - lock_sock() - success - release_sock() - return 0 llcp_sock_sendmsg() - lock_sock() - release_sock() llcp_sock_bind(), same socket - lock_sock() - error - nfc_llcp_send_ui_frame() - if (!llcp_sock->local) - llcp_sock->local = NULL - nfc_put_device(dev) - dereference llcp_sock->dev - release_sock() - return -ERRNO The nfc_llcp_send_ui_frame() checked llcp_sock->local outside of the lock, which is racy and ineffective check. Instead, its caller llcp_sock_sendmsg(), should perform the check inside lock_sock(). Reported-and-tested-by: syzbot+7f23bcddf626e0593a39@syzkaller.appspotmail.com Fixes: b874dec21d1c ("NFC: Implement LLCP connection less Tx path") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-19net: axienet: increase default TX ring size to 128Robert Hancock1-1/+1
With previous changes to make the driver handle the TX ring size more correctly, the default TX ring size of 64 appears to significantly bottleneck TX performance to around 600 Mbps on a 1 Gbps link on ZynqMP. Increasing this to 128 seems to bring performance up to near line rate and shouldn't cause excess bufferbloat (this driver doesn't yet support modern byte-based queue management). Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-19net: axienet: fix for TX busy handlingRobert Hancock1-39/+47
Network driver documentation indicates we should be avoiding returning NETDEV_TX_BUSY from ndo_start_xmit in normal cases, since it requires the packets to be requeued. Instead the queue should be stopped after a packet is added to the TX ring when there may not be enough room for an additional one. Also, when TX ring entries are completed, we should only wake the queue if we know there is room for another full maximally fragmented packet. Print a warning if there is insufficient space at the start of start_xmit, since this should no longer happen. Combined with increasing the default TX ring size (in a subsequent patch), this appears to recover the TX performance lost by previous changes to actually manage the TX ring state properly. Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-19net: axienet: fix number of TX ring slots for available checkRobert Hancock1-2/+2
The check for the number of available TX ring slots was off by 1 since a slot is required for the skb header as well as each fragment. This could result in overwriting a TX ring slot that was still in use. Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-19net: axienet: Fix TX ring slot available checkRobert Hancock1-2/+2
The check for whether a TX ring slot was available was incorrect, since a slot which had been loaded with transmit data but the device had not started transmitting would be treated as available, potentially causing non-transmitted slots to be overwritten. The control field in the descriptor should be checked, rather than the status field (which may only be updated when the device completes the entry). Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-19net: axienet: limit minimum TX ring sizeRobert Hancock1-1/+3
The driver will not work properly if the TX ring size is set to below MAX_SKB_FRAGS + 1 since it needs to hold at least one full maximally fragmented packet in the TX ring. Limit setting the ring size to below this value. Fixes: 8b09ca823ffb4 ("net: axienet: Make RX/TX ring sizes configurable") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-19net: axienet: add missing memory barriersRobert Hancock1-1/+10
This driver was missing some required memory barriers: Use dma_rmb to ensure we see all updates to the descriptor after we see that an entry has been completed. Use wmb and rmb to avoid stale descriptor status between the TX path and TX complete IRQ path. Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-19net: axienet: reset core on initialization prior to MDIO accessRobert Hancock1-0/+5
In some cases where the Xilinx Ethernet core was used in 1000Base-X or SGMII modes, which use the internal PCS/PMA PHY, and the MGT transceiver clock source for the PCS was not running at the time the FPGA logic was loaded, the core would come up in a state where the PCS could not be found on the MDIO bus. To fix this, the Ethernet core (including the PCS) should be reset after enabling the clocks, prior to attempting to access the PCS using of_mdio_find_device. Fixes: 1a02556086fc (net: axienet: Properly handle PCS/PMA PHY for 1000BaseX mode) Signed-off-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-19net: axienet: Wait for PhyRstCmplt after core resetRobert Hancock1-0/+10
When resetting the device, wait for the PhyRstCmplt bit to be set in the interrupt status register before continuing initialization, to ensure that the core is actually ready. When using an external PHY, this also ensures we do not start trying to access the PHY while it is still in reset. The PHY reset is initiated by the core reset which is triggered just above, but remains asserted for 5ms after the core is reset according to the documentation. The MgtRdy bit could also be waited for, but unfortunately when using 7-series devices, the bit does not appear to work as documented (it seems to behave as some sort of link state indication and not just an indication the transceiver is ready) so it can't really be relied on for this purpose. Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-19net: axienet: increase reset timeoutRobert Hancock1-10/+9
The previous timeout of 1ms was too short to handle some cases where the core is reset just after the input clocks were started, which will be introduced in an upcoming patch. Increase the timeout to 50ms. Also simplify the reset timeout checking to use read_poll_timeout. Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-19bpf, selftests: Add ringbuf memory type confusion testDaniel Borkmann4-2/+79
Add two tests, one which asserts that ring buffer memory can be passed to other helpers for populating its entry area, and another one where verifier rejects different type of memory passed to bpf_ringbuf_submit(). Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>