aboutsummaryrefslogtreecommitdiffstats
path: root/scripts/sorttable.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-11-01Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds1-0/+30
Pull arm64 updates from Will Deacon: "There's the usual summary below, but the highlights are support for the Armv8.6 timer extensions, KASAN support for asymmetric MTE, the ability to kexec() with the MMU enabled and a second attempt at switching to the generic pfn_valid() implementation. Summary: - Support for the Arm8.6 timer extensions, including a self-synchronising view of the system registers to elide some expensive ISB instructions. - Exception table cleanup and rework so that the fixup handlers appear correctly in backtraces. - A handful of miscellaneous changes, the main one being selection of CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK. - More mm and pgtable cleanups. - KASAN support for "asymmetric" MTE, where tag faults are reported synchronously for loads (via an exception) and asynchronously for stores (via a register). - Support for leaving the MMU enabled during kexec relocation, which significantly speeds up the operation. - Minor improvements to our perf PMU drivers. - Improvements to the compat vDSO build system, particularly when building with LLVM=1. - Preparatory work for handling some Coresight TRBE tracing errata. - Cleanup and refactoring of the SVE code to pave the way for SME support in future. - Ensure SCS pages are unpoisoned immediately prior to freeing them when KASAN is enabled for the vmalloc area. - Try moving to the generic pfn_valid() implementation again now that the DMA mapping issue from last time has been resolved. - Numerous improvements and additions to our FPSIMD and SVE selftests" [ armv8.6 timer updates were in a shared branch and already came in through -tip in the timer pull - Linus ] * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (85 commits) arm64: Select POSIX_CPU_TIMERS_TASK_WORK arm64: Document boot requirements for FEAT_SME_FA64 arm64/sve: Fix warnings when SVE is disabled arm64/sve: Add stub for sve_max_virtualisable_vl() arm64: errata: Add detection for TRBE write to out-of-range arm64: errata: Add workaround for TSB flush failures arm64: errata: Add detection for TRBE overwrite in FILL mode arm64: Add Neoverse-N2, Cortex-A710 CPU part definition selftests: arm64: Factor out utility functions for assembly FP tests arm64: vmlinux.lds.S: remove `.fixup` section arm64: extable: add load_unaligned_zeropad() handler arm64: extable: add a dedicated uaccess handler arm64: extable: add `type` and `data` fields arm64: extable: use `ex` for `exception_table_entry` arm64: extable: make fixup_exception() return bool arm64: extable: consolidate definitions arm64: gpr-num: support W registers arm64: factor out GPR numbering helpers arm64: kvm: use kvm_exception_table_entry arm64: lib: __arch_copy_to_user(): fold fixups into body ...
2021-10-21arm64: extable: add `type` and `data` fieldsMark Rutland1-0/+30
Subsequent patches will add specialized handlers for fixups, in addition to the simple PC fixup and BPF handlers we have today. In preparation, this patch adds a new `type` field to struct exception_table_entry, and uses this to distinguish the fixup and BPF cases. A `data` field is also added so that subsequent patches can associate data specific to each exception site (e.g. register numbers). Handlers are named ex_handler_*() for consistency, following the exmaple of x86. At the same time, get_ex_fixup() is split out into a helper so that it can be used by other ex_handler_*() functions ins subsequent patches. This patch will increase the size of the exception tables, which will be remedied by subsequent patches removing redundant fixup code. There should be no functional change as a result of this patch. Since each entry is now 12 bytes in size, we must reduce the alignment of each entry from `.align 3` (i.e. 8 bytes) to `.align 2` (i.e. 4 bytes), which is the natrual alignment of the `insn` and `fixup` fields. The current 8-byte alignment is a holdover from when the `insn` and `fixup` fields was 8 bytes, and while not harmful has not been necessary since commit: 6c94f27ac847ff8e ("arm64: switch to relative exception tables") Similarly, RO_EXCEPTION_TABLE_ALIGN is dropped to 4 bytes. Concurrently with this patch, x86's exception table entry format is being updated (similarly to a 12-byte format, with 32-bytes of absolute data). Once both have been merged it should be possible to unify the sorttable logic for the two. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: James Morse <james.morse@arm.com> Cc: Jean-Philippe Brucker <jean-philippe@linaro.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20211019160219.5202-11-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2021-10-16Merge branch 'x86/urgent' into x86/fpu, to resolve a conflictIngo Molnar1-0/+4
Resolve the conflict between these commits: x86/fpu: 1193f408cd51 ("x86/fpu/signal: Change return type of __fpu_restore_sig() to boolean") x86/urgent: d298b03506d3 ("x86/fpu: Restore the masking out of reserved MXCSR bits") b2381acd3fd9 ("x86/fpu: Mask out the invalid MXCSR bits properly") Conflicts: arch/x86/kernel/fpu/signal.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-09-24scripts/sorttable: riscv: fix undeclared identifier 'EM_RISCV' errorMiles Chen1-0/+4
Fix the following build failure reported in [1] by adding a conditional definition of EM_RISCV in order to allow cross-compilation on machines which do not have EM_RISCV definition in their host. scripts/sorttable.c:352:7: error: use of undeclared identifier 'EM_RISCV' EM_RISCV was added to <elf.h> in glibc 2.24 so builds on systems with glibc headers < 2.24 should show this error. [mkubecek@suse.cz: changelog addition] Link: https://lore.kernel.org/lkml/e8965b25-f15b-c7b4-748c-d207dda9c8e8@i2se.com/ [1] Link: https://lkml.kernel.org/r/20210913030625.4525-1-miles.chen@mediatek.com Fixes: 54fed35fd393 ("riscv: Enable BUILDTIME_TABLE_SORT") Signed-off-by: Miles Chen <miles.chen@mediatek.com> Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Cc: Michal Kubecek <mkubecek@suse.cz> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Markus Mayer <mmayer@broadcom.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-13x86/extable: Rework the exception table mechanicsThomas Gleixner1-2/+2
The exception table entries contain the instruction address, the fixup address and the handler address. All addresses are relative. Storing the handler address has a few downsides: 1) Most handlers need to be exported 2) Handlers can be defined everywhere and there is no overview about the handler types 3) MCE needs to check the handler type to decide whether an in kernel #MC can be recovered. The functionality of the handler itself is not in any way special, but for these checks there need to be separate functions which in the worst case have to be exported. Some of these 'recoverable' exception fixups are pretty obscure and just reuse some other handler to spare code. That obfuscates e.g. the #MC safe copy functions. Cleaning that up would require more handlers and exports Rework the exception fixup mechanics by storing a fixup type number instead of the handler address and invoke the proper handler for each fixup type. Also teach the extable sort to leave the type field alone. This makes most handlers static except for special cases like the MCE MSR fixup and the BPF fixup. This allows to add more types for cleaning up the obscure places without adding more handler code and exports. There is a marginal code size reduction for a production config and it removes _eight_ exported symbols. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Alexei Starovoitov <ast@kernel.org> Link: https://lkml.kernel.org/r/20210908132525.211958725@linutronix.de
2021-09-10riscv: Enable BUILDTIME_TABLE_SORTJisheng Zhang1-0/+1
Enable BUILDTIME_TABLE_SORT to sort the exception table at build time rather than during boot. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-07-20s390/kernel: expand exception table logic to allow new handling optionsIlya Leoshkevich1-0/+41
This is a s390 port of commit 548acf19234d ("x86/mm: Expand the exception table logic to allow new handling options"), which is needed for implementing BPF_PROBE_MEM on s390. The new handler field is made 64-bit in order to allow pointing from dynamically allocated entries to handlers in kernel text. Unlike on x86, NULL is used instead of ex_handler_default. This is because exception tables are used by boot/text_dma.S, and it would be a pain to preserve ex_handler_default. The new infrastructure is ignored in early_pgm_check_handler, since there is no pt_regs. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2019-12-13scripts/sorttable: Implement build-time ORC unwind table sortingShile Zhang1-1/+5
The ORC unwinder has two tables: .orc_unwind_ip and .orc_unwind, which need to be sorted for binary search. Previously this sorting was done during bootup. Sort them at build time to speed up booting. Add the ORC tables sorting in a parallel build process to speed up the build. [ mingo: Rewrote the changelog and fixed some comments. ] Suggested-by: Andy Lutomirski <luto@amacapital.net> Suggested-by: Peter Zijlstra <peterz@infradead.org> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Shile Zhang <shile.zhang@linux.alibaba.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: linux-kbuild@vger.kernel.org Link: https://lkml.kernel.org/r/20191204004633.88660-7-shile.zhang@linux.alibaba.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-12-13scripts/sorttable: Rename 'sortextable' to 'sorttable'Shile Zhang1-0/+373
Use a more generic name for additional table sorting usecases, such as the upcoming ORC table sorting feature. This tool is not tied to exception table sorting anymore. No functional changes intended. [ mingo: Rewrote the changelog. ] Signed-off-by: Shile Zhang <shile.zhang@linux.alibaba.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: linux-kbuild@vger.kernel.org Link: https://lkml.kernel.org/r/20191204004633.88660-6-shile.zhang@linux.alibaba.com Signed-off-by: Ingo Molnar <mingo@kernel.org>