aboutsummaryrefslogtreecommitdiffstats
path: root/scripts/tools-support-relr.sh (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2022-03-01s390/mm,pageattr: don't use pte_val()/pXd_val() as lvalueHeiko Carstens1-8/+8
Convert pgtable code so pte_val()/pXd_val() aren't used as lvalue anymore. This allows in later step to convert pte_val()/pXd_val() to functions, which in turn makes it impossible to use these macros to modify page table entries like they have been used before. Therefore a construct like this: pte_val(*pte) = __pa(addr) | prot; which would directly write into a page table, isn't possible anymore with the last step of this series. Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-01s390/mm,pgtable: don't use pte_val()/pXd_val() as lvalueHeiko Carstens2-89/+77
Convert pgtable code so pte_val()/pXd_val() aren't used as lvalue anymore. This allows in later step to convert pte_val()/pXd_val() to functions, which in turn makes it impossible to use these macros to modify page table entries like they have been used before. Therefore a construct like this: pte_val(*pte) = __pa(addr) | prot; which would directly write into a page table, isn't possible anymore with the last step of this series. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-01s390/mm: use set_pXd()/set_pte() helper functions everywhereHeiko Carstens9-50/+51
Use the new set_pXd()/set_pte() helper functions at all places where page table entries are modified. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-01s390/mm: add set_pte_bit()/clear_pte_bit() helper functionsHeiko Carstens1-0/+30
Add set_pte_bit()/clear_pte_bit() and set_pXd_bit()/clear_pXd_bit helper functions which are supposed to be used if bits within ptes/pXds are set/cleared. The only point of these helper functions is to get more readable code. This is quite similar to what arm64 has. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-01s390/mm: add set_pXd()/set_pte() helper functionsHeiko Carstens1-0/+25
Add set_pXd()/set_pte() helper functions which must be used to update page table entries. The new helpers use WRITE_ONCE() to make sure that a page table entry is written to only once. Without this the compiler could otherwise generate code which writes several times to a page table entry when updating its contents from invalid to valid, which could lead to surprising results especially for multithreaded processes... Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-01s390/entry: remove unused expoline thunkVasily Gorbik1-1/+0
Remove __s390_indirect_jump_r13use_r14 expoline thunk unused since commit fbbdfca5c553 ("s390/entry.S: factor out SIEEXIT macro"). Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-01s390/ftrace: make use of epsw to get psw maskHeiko Carstens1-4/+10
Finally use epsw to create a complete psw mask within pt_regs. Without this only some bits are correct, while other bits are (incorrectly) always zero. The epsw instruction is quite heavy weight, however given that this only effects ftrace_regs_caller this seems to be the right thing, so we finally get a complete psw mask for ftrace kprobed functions. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-01s390/ptrace: remove opencoded offsetofHeiko Carstens1-88/+76
Remove opencoded offsetof and use offsetof instead. The generated code is identical before/after this change. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-01s390/smp: sort out physical vs virtual pointers usageAlexander Gordeev1-3/+3
With commit 5789284710aa ("s390/smp: reallocate IPL CPU lowcore") virtual addresses are wrongly passed to memblock_free_late() and SPX instructions on IPL CPU reinitialization. Note: this does not fix a bug currently, since virtual and physical addresses are identical. Fixes: 5789284710aa ("s390/smp: reallocate IPL CPU lowcore") Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-01s390/ap: enable sysfs attribute scans to force AP bus rescanHarald Freudenberger1-1/+11
This patch switches the sysfs attribute /sys/bus/ap/scans from read-only to read-write. If there is something written to this attribute, an AP bus rescan is forced. If an AP bus scan is triggered this way a debug feature entry line reports this in /sys/kernel/debug/s390dbf/ap/sprintf. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Jakob Naucke <naucke@linux.ibm.com> Reviewed-by: Juergen Christ <jchrist@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-01s390/ap: notify drivers on config changed and scan complete callbacksTony Krowiak2-2/+91
This patch introduces an extension to the ap bus to notify device drivers when the host AP configuration changes - i.e., adapters, domains or control domains are added or removed. When an adapter or domain is added to the host's AP configuration, the AP bus will create the associated queue devices in the linux sysfs device model. Each new type 10 (i.e., CEX4) or newer queue device with an APQN that is not reserved for the default device driver will get bound to the vfio_ap device driver. Likewise, whan an adapter or domain is removed from the host's AP configuration, the AP bus will remove the associated queue devices from the sysfs device model. Each of the queues that is bound to the vfio_ap device driver will get unbound. With the introduction of hot plug support, binding or unbinding of a queue device will result in plugging or unplugging one or more queues from a guest that is using the queue. If there are multiple changes to the host's AP configuration, it could result in the probe and remove callbacks getting invoked multiple times. Each time queues are plugged into or unplugged from a guest, the guest's VCPUs must be taken out of SIE. If this occurs multiple times due to changes in the host's AP configuration, that can have an undesirable negative affect on the guest's performance. To alleviate this problem, this patch introduces two new callbacks: one to notify the vfio_ap device driver when the AP bus scan routine detects a change to the host's AP configuration; and, one to notify the driver when the AP bus is done scanning. This will allow the vfio_ap driver to do bulk processing of all affected adapters, domains and control domains for affected guests rather than plugging or unplugging them one at a time when the probe or remove callback is invoked. The two new callbacks are: void (*on_config_changed)(struct ap_config_info *new_config_info, struct ap_config_info *old_config_info); This callback is invoked at the start of the AP bus scan function when it determines that the host AP configuration information has changed since the previous scan. This is done by storing an old and current QCI info struct and comparing them. If there is any difference, the callback is invoked. void (*on_scan_complete)(struct ap_config_info *new_config_info, struct ap_config_info *old_config_info); The on_scan_complete callback is invoked after the ap bus scan is completed if the host AP configuration data has changed. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-01s390/ap: driver callback to indicate resource in useTony Krowiak2-10/+139
Introduces a new driver callback to prevent a root user from re-assigning the APQN of a queue that is in use by a non-default host device driver to a default host device driver and vice versa. The callback will be invoked whenever a change to the AP bus's sysfs apmask or aqmask attributes would result in one or more APQNs being re-assigned. If the callback responds in the affirmative for any driver queried, the change to the apmask or aqmask will be rejected with a device busy error. For this patch, only non-default drivers will be queried. Currently, there is only one non-default driver, the vfio_ap device driver. The vfio_ap device driver facilitates pass-through of an AP queue to a guest. The idea here is that a guest may be administered by a different sysadmin than the host and we don't want AP resources to unexpectedly disappear from a guest's AP configuration (i.e., adapters and domains assigned to the matrix mdev). This will enforce the proper procedure for removing AP resources intended for guest usage which is to first unassign them from the matrix mdev, then unbind them from the vfio_ap device driver. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-01s390/test_unwind: fix and extend kprobes testVasily Gorbik1-33/+50
Running kprobe test on a kernel built with clang 14 didn't actually trigger pgm_pre_handler() and no unwinder code was called. Even though do_report_trap() is a global symbol, clang inlined it in several local functions including illegal_op() handler, so that kprobbing a global symbol didn't have a desired effect. To achieve the same test result (unwinding from a program check handler) introduce a local function and probe an instruction in the middle, so that kprobe doesn't take KPROBE_ON_FTRACE path. While at it, add another test for KPROBE_ON_FTRACE. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-01s390/test_unwind: add ftrace testVasily Gorbik1-0/+59
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-01s390/test_unwind: add "backtrace" module parameterVasily Gorbik1-1/+5
By default no backtraces are printed when a test succeeds, but sometimes it is useful to spot issues automated test doesn't cover. Add "backtrace" module parameter to force it. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-01s390/test_unwind: minor cleanupVasily Gorbik1-44/+28
- make current_test static - use current_test consistently - add TEST_WITH_FLAGS macro to contract parametrized tests definition Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-01s390/test_unwind: show tests as skipped if unsupportedVasily Gorbik1-6/+3
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-01s390: always use the packed stack layoutVasily Gorbik5-37/+5
-mpacked-stack option has been supported by both minimum gcc and clang versions for a while. With commit e2bc3e91d91e ("scripts/min-tool-version.sh: Raise minimum clang version to 13.0.0 for s390") minimum clang version now also supports a combination of flags -mpacked-stack -mbackchain -pg -mfentry and fulfills all requirements to always enable the packed stack layout. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-01s390/extable: fix exception table sortingHeiko Carstens1-2/+7
s390 has a swap_ex_entry_fixup function, however it is not being used since common code expects a swap_ex_entry_fixup define. If it is not defined the default implementation will be used. So fix this by adding a proper define. However also the implementation of the function must be fixed, since a NULL value for handler has a special meaning and must not be adjusted. Luckily all of this doesn't fix a real bug currently: the main extable is correctly sorted during build time, and for runtime sorting there is currently no case where the handler field is not NULL. Fixes: 05a68e892e89 ("s390/kernel: expand exception table logic to allow new handling options") Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-01s390/ftrace: fix arch_ftrace_get_regs implementationHeiko Carstens4-5/+18
arch_ftrace_get_regs is supposed to return a struct pt_regs pointer only if the pt_regs structure contains all register contents, which means it must have been populated when created via ftrace_regs_caller. If it was populated via ftrace_caller the contents are not complete (the psw mask part is missing), and therefore a NULL pointer needs be returned. The current code incorrectly always returns a struct pt_regs pointer. Fix this by adding another pt_regs flag which indicates if the contents are complete, and fix arch_ftrace_get_regs accordingly. Fixes: 894979689d3a ("s390/ftrace: provide separate ftrace_caller/ftrace_regs_caller implementations") Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reported-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-01s390/ftrace: fix ftrace_caller/ftrace_regs_caller generationHeiko Carstens1-0/+35
ftrace_caller was used for both ftrace_caller and ftrace_regs_caller, which means that the target address of the hotpatch trampoline was never updated. With commit 894979689d3a ("s390/ftrace: provide separate ftrace_caller/ftrace_regs_caller implementations") a separate ftrace_regs_caller entry point was implemeted, however it was forgotten to implement the necessary changes for ftrace_modify_call and ftrace_make_call, where the branch target has to be modified accordingly. Therefore add the missing code now. Fixes: 894979689d3a ("s390/ftrace: provide separate ftrace_caller/ftrace_regs_caller implementations") Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-01s390/setup: preserve memory at OLDMEM_BASE and OLDMEM_SIZEAlexander Egorenkov1-0/+2
We need to preserve the values at OLDMEM_BASE and OLDMEM_SIZE which are used by zgetdump in case when kdump crashes. In that case zgetdump will attempt to read OLDMEM_BASE and OLDMEM_SIZE in order to find out where the memory range [0 - OLDMEM_SIZE] belonging to the production kernel is. Fixes: f1a546947431 ("s390/setup: don't reserve memory that occupied decompressor's head") Cc: stable@vger.kernel.org # 5.15+ Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com> Acked-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-09s390/mm: use CRST_ALLOC_ORDER instead of numberHeiko Carstens1-4/+4
Use CRST_ALLOC_ORDER to make it more obvious what the order means, and also to be consistent with other code, e.g. the vmemmap code. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-09s390/maccess: fix semantics of memcpy_real() and its callersAlexander Gordeev8-42/+38
There is a confusion with regard to the source address of memcpy_real() and calling functions. While the declared type for a source assumes a virtual address, in fact it always called with physical address of the source. This confusion led to bugs in copy_oldmem_kernel() and copy_oldmem_user() functions, where __pa() macro applied mistakenly to physical addresses. It does not lead to a real issue, since virtual and physical addresses are currently the same. Fix both the bugs and memcpy_real() prototype by making type of source address consistent to the function name and the way it actually used. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-09s390/dump: fix old lowcore virtual vs physical address confusionAlexander Gordeev3-2/+5
Virtual addresses of vmcore_info and os_info members are wrongly passed to copy_oldmem_kernel(), while the function expects physical address of the source. Instead, __pa() macro should have been applied. Yet, use of __pa() macro could be somehow confusing, since copy_oldmem_kernel() may treat the source as an offset, not as a direct physical address (that depens from the oldmem availability and location). Fix the virtual vs physical address confusion and make the way the old lowcore is read consistent across all sources. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-09s390/cio: verify the driver availability for path_event callVineeth Vijayan1-1/+1
If no driver is attached to a device or the driver does not provide the path_event function, an FCES path-event on this device could end up in a kernel-panic. Verify the driver availability before the path_event function call. Fixes: 32ef938815c1 ("s390/cio: Add support for FCES status notification") Cc: stable@vger.kernel.org Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Suggested-by: Peter Oberparleiter <oberpar@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-06s390/lgr: use simple assignment instead of memcpyHeiko Carstens1-2/+1
It is quite pointless to use memcpy to copy two bytes, besides that this construct will also partially remove type and size sanity checks. Therefore simply use an assignment. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-06s390/dump: fix os_info virtual vs physical address confusionAlexander Gordeev1-2/+2
Due to historical reasons os_info handling functions misuse the notion of physical vs virtual addresses difference. Note: this does not fix a bug currently, since virtual and physical addresses are identical. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-06s390/sclp_sdias: fix sclp_sdias_copy() virtual vs physical address confusionAlexander Gordeev1-1/+1
Due to historical reasons sclp_sdias_copy() misuses the notion of physical vs virtual addresses difference. Note: this does not fix a bug currently, since virtual and physical addresses are identical. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-06s390/maccess: fix absolute lowcore virtual vs physical address confusionAlexander Gordeev1-8/+9
Due to historical reasons memcpy_absolute() and friend functions misuse the notion of physical vs virtual addresses difference. Note: this does not fix a bug currently, since virtual and physical addresses are identical. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-06s390/ftrace: verify opcode before applying patchSven Schnelle1-16/+27
commit 72b3942a173c ("scripts: ftrace - move the sort-processing in ftrace_init") had the unexpected side effect that wrong code locations were patched. To prevent this from happening again, verify the opcode before patching it. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-06s390: remove invalid email address of Heiko CarstensHeiko Carstens27-34/+5
Remove my old invalid email address which can be found in a couple of files. Instead of updating it, just remove my contact data completely from source files. We have git and other tools which allow to figure out who is responsible for what with recent contact data. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-06s390/vfio-ap: add s390dbf logging to the vfio_ap_irq_enable functionTony Krowiak2-6/+72
This patch adds s390dbf logging to the function that executes the PQAP(AQIC) instruction on behalf of the guest to which the queue for which interrupts are being enabled or disabled is attached. Currently, the vfio_ap_irq_enable function sets status response code 06 (notification indicator byte address (nib) invalid) in the status word when the vfio_pin_pages function - called to pin the page containing the nib - returns an error or a different number of pages pinned than requested. Setting the response code returned to userspace without also logging a message in the kernel makes it impossible to determine whether the response was due to an error detected by the vfio_ap device driver or because the response code was returned by the firmware in response to the PQAP(AQIC) instruction. In addition to logging a warning for the situation above, this patch adds the following: * A function to validate the nib address invoked prior to calling the vfio_pin_pages function. This allows for logging a message informing the reader of the reason the page containing the nib can not be pinned if the nib address is not valid. Response code 06 (invalid nib address) will be set in the status word returned to the guest from the instruction. * Checks the return value from the kvm_s390_gisc_register and logs a message informing the reader of the failure. Status response code 08 (invalid gisa) will be set in the status word returned to the guest from the PQAP(AQIC) instruction. * Checks the status response code returned from execution of the PQAP(AQIC) instruction and if it indicates an error, logs a message informing the reader. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-06s390/vfio-ap: add s390dbf logging to the handle_pqap functionTony Krowiak1-6/+68
This patch adds s390dbf logging to the function that handles interception of the PQAP(AQIC) instruction. Several items of data are validated before ultimately calling the functions that execute the PQAP(AQIC) instruction on behalf of the guest to which the queue for which interrupts are being enabled or disabled is attached. Currently, the handle_pqap function sets status response code 01 (queue not available) in the status word that is normally returned from the PQAP(AQIC) instruction under the following conditions: * Set when the function pointer to the handler is not set in the kvm_s390_crypto object (i.e., the PQAP hook is not registered). * Set when the KVM pointer is not set in the ap_matrix_mdev object (i.e., the matrix mdev is not passed through to a guest). * Set when the queue for which interrupts are being enabled or disabled is either not bound to the vfio_ap device driver or not assigned to the matrix mdev. Setting the response code returned to userspace without also logging a message in the kernel makes it impossible to determine whether the response was due to an error detected by the vfio_ap device driver or because the response code was returned by the firmware in response to the PQAP(AQIC) instruction, so this patch logs a message to the s390dbf log for the vfio_ap device driver for each of the situations described above. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-06MAINTAINERS: update file path for S390 VFIO AP DRIVERTony Krowiak1-3/+1
Changed the MAINTAINERS file to include the new drivers/s390/crypto/vfio_ap_debug.h file path. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Acked-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-06s390-vfio-ap: introduces s390 kernel debug feature for vfio_ap device driverTony Krowiak2-0/+53
Sets up an s390dbf debug log for the vfio_ap device driver for logging events occurring during the lifetime of the driver. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-06s390/module: fix building test_modules_helpers.o with clangIlya Leoshkevich2-3/+3
Move test_modules_return_* prototypes into a header file in order to placate -Wmissing-prototypes. Fixes: 90c5318795ee ("s390/module: test loading modules with a lot of relocations") Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-06MAINTAINERS: downgrade myself to Reviewer for s390Christian Borntraeger1-1/+1
Now that Alexander Gordeev has volunteered to be a co-maintainer for s390, I can act as a reviewer instead of being a maintainer for s390. With Alexander, Heiko, and Vasily we are in really good shape. I will continue to act as the maintainer for KVM on s390 together with Janosch. Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-06MAINTAINERS: add Alexander Gordeev as maintainer for s390Heiko Carstens1-1/+1
Change Alexander Gordeev's status so he is maintainer instead of reviewer for s390. Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-06Linux 5.17-rc3Linus Torvalds1-1/+1
2022-02-06perf ftrace: system_wide collection is not effective by defaultChangbin Du1-21/+24
The ftrace.target.system_wide must be set before invoking evlist__create_maps(), otherwise it has no effect. Fixes: 53be50282269b46c ("perf ftrace: Add 'latency' subcommand") Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Namhyung Kim <namhyung@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220127132010.4836-1-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-02-06libperf: Add arm64 support to perf_mmap__read_self()Rob Herring2-1/+102
Add the arm64 variants for read_perf_counter() and read_timestamp(). Unfortunately the counter number is encoded into the instruction, so the code is a bit verbose to enumerate all possible counters. Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Tested-by: John Garry <john.garry@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Link: https://lore.kernel.org/r/20220201214056.702854-1-robh@kernel.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-kernel@vger.kernel.org Cc: linux-perf-users@vger.kernel.org
2022-02-06tools include UAPI: Sync sound/asound.h copy with the kernel sourcesArnaldo Carvalho de Melo1-1/+3
Picking the changes from: 06feec6005c9d950 ("ASoC: hdmi-codec: Fix OOB memory accesses") Which entails no changes in the tooling side as it doesn't introduce new SNDRV_PCM_IOCTL_ ioctls. To silence this perf tools build warning: Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h' diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h Cc: Dmitry Osipenko <digetx@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/lkml/Yf+6OT+2eMrYDEeX@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-02-06perf stat: Fix display of grouped aliased eventsIan Rogers1-9/+10
An event may have a number of uncore aliases that when added to the evlist are consecutive. If there are multiple uncore events in a group then parse_events__set_leader_for_uncore_aliase will reorder the evlist so that events on the same PMU are adjacent. The collect_all_aliases function assumes that aliases are in blocks so that only the first counter is printed and all others are marked merged. The reordering for groups breaks the assumption and so all counts are printed. This change removes the assumption from collect_all_aliases that the events are in blocks and instead processes the entire evlist. Before: ``` $ perf stat -e '{UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE,UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE},duration_time' -a -A -- sleep 1 Performance counter stats for 'system wide': CPU0 256,866 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 494,413 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 967 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,738 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 285,161 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 429,920 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 955 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,443 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 310,753 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 416,657 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,231 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,573 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 416,067 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 405,966 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,481 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,447 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 312,911 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 408,154 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,086 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,380 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 333,994 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 370,349 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,287 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,335 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 188,107 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 302,423 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 701 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,070 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 307,221 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 383,642 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,036 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,158 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 318,479 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 821,545 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,028 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 2,550 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 227,618 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 372,272 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 903 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,456 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 376,783 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 419,827 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,406 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,453 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 286,583 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 429,956 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 999 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,436 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 313,867 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 370,159 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,114 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,291 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 342,083 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 409,111 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,399 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,684 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 365,828 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 376,037 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,378 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,411 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 382,456 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 621,743 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,232 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,955 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 342,316 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 385,067 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,176 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,268 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 373,588 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 386,163 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,394 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,464 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 381,206 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 546,891 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,266 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,712 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 221,176 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 392,069 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 831 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,456 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 355,401 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 705,595 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,235 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 2,216 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 371,436 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 428,103 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,306 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,442 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 384,352 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 504,200 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,468 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,860 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 228,856 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 287,976 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 832 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,060 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 215,121 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 334,162 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 681 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,026 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 296,179 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 436,083 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,084 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,525 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 262,296 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 416,573 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 986 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,533 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 285,852 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 359,842 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,073 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,326 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 303,379 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 367,222 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,008 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,156 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 273,487 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 425,449 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 932 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,367 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 297,596 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 414,793 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,140 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,601 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 342,365 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 360,422 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,291 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,342 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 327,196 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 580,858 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,122 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 2,014 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 296,564 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 452,817 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,087 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,694 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 375,002 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 389,393 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,478 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,540 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 365,213 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 594,685 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,401 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 2,222 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 1,000,749,060 ns duration_time 1.000749060 seconds time elapsed ``` After: ``` Performance counter stats for 'system wide': CPU0 20,547,434 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 45,202,862 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 82,001 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 159,688 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 1,000,464,828 ns duration_time 1.000464828 seconds time elapsed ``` Fixes: 3cdc5c2cb924acb4 ("perf parse-events: Handle uncore event aliases in small groups properly") Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Asaf Yaffe <asaf.yaffe@intel.com> Cc: Caleb Biggers <caleb.biggers@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kshipra Bopardikar <kshipra.bopardikar@intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Perry Taylor <perry.taylor@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Vineet Singh <vineet.singh@intel.com> Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com> Link: https://lore.kernel.org/r/20220205010941.1065469-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-02-06perf tools: Apply correct label to user/kernel symbols in branch modeGerman Gomez3-2/+5
In branch mode, the branch symbols were being displayed with incorrect cpumode labels. So fix this. For example, before: # perf record -b -a -- sleep 1 # perf report -b Overhead Command Source Shared Object Source Symbol Target Symbol 0.08% swapper [kernel.kallsyms] [k] rcu_idle_enter [k] cpuidle_enter_state ==> 0.08% cmd0 [kernel.kallsyms] [.] psi_group_change [.] psi_group_change 0.08% cmd1 [kernel.kallsyms] [k] psi_group_change [k] psi_group_change After: # perf report -b Overhead Command Source Shared Object Source Symbol Target Symbol 0.08% swapper [kernel.kallsyms] [k] rcu_idle_enter [k] cpuidle_enter_state 0.08% cmd0 [kernel.kallsyms] [k] psi_group_change [k] pei_group_change 0.08% cmd1 [kernel.kallsyms] [k] psi_group_change [k] psi_group_change Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: German Gomez <german.gomez@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220126105927.3411216-1-german.gomez@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-02-06perf bpf: Fix a typo in bpf_counter_cgroup.cMasanari Iida1-1/+1
This patch fixes a spelling typo in error message. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20211225005558.503935-1-standby24x7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-02-06perf synthetic-events: Return error if procfs isn't mounted for PID namespacesLeo Yan1-0/+19
For perf recording, it retrieves process info by iterating nodes in proc fs. If we run perf in a non-root PID namespace with command: # unshare --fork --pid perf record -e cycles -a -- test_program ... in this case, unshare command creates a child PID namespace and launches perf tool in it, but the issue is the proc fs is not mounted for the non-root PID namespace, this leads to the perf tool gathering process info from its parent PID namespace. We can use below command to observe the process nodes under proc fs: # unshare --pid --fork ls /proc 1 137 1968 2128 3 342 48 62 78 crypto kcore net uptime 10 138 2 2142 30 35 49 63 8 devices keys pagetypeinfo version 11 139 20 2143 304 36 50 64 82 device-tree key-users partitions vmallocinfo 12 14 2011 22 305 37 51 65 83 diskstats kmsg self vmstat 128 140 2038 23 307 39 52 656 84 driver kpagecgroup slabinfo zoneinfo 129 15 2074 24 309 4 53 67 9 execdomains kpagecount softirqs 13 16 2094 241 31 40 54 68 asound fb kpageflags stat 130 164 2096 242 310 41 55 69 buddyinfo filesystems loadavg swaps 131 17 2098 25 317 42 56 70 bus fs locks sys 132 175 21 26 32 43 57 71 cgroups interrupts meminfo sysrq-trigger 133 179 2102 263 329 44 58 75 cmdline iomem misc sysvipc 134 1875 2103 27 330 45 59 76 config.gz ioports modules thread-self 135 19 2117 29 333 46 6 77 consoles irq mounts timer_list 136 1941 2121 298 34 47 60 773 cpuinfo kallsyms mtd tty So it shows many existed tasks, since unshared command has not mounted the proc fs for the new created PID namespace, it still accesses the proc fs of the root PID namespace. This leads to two prominent issues: - Firstly, PID values are mismatched between thread info and samples. The gathered thread info are coming from the proc fs of the root PID namespace, but samples record its PID from the child PID namespace. - The second issue is profiled program 'test_program' returns its forked PID number from the child PID namespace, perf tool wrongly uses this PID number to retrieve the process info via the proc fs of the root PID namespace. To avoid issues, we need to mount proc fs for the child PID namespace with the option '--mount-proc' when use unshare command: # unshare --fork --pid --mount-proc perf record -e cycles -a -- test_program Conversely, when the proc fs of the root PID namespace is used by child namespace, perf tool can detect the multiple PID levels and nsinfo__is_in_root_namespace() returns false, this patch reports error for this case: # unshare --fork --pid perf record -e cycles -a -- test_program Couldn't synthesize bpf events. Perf runs in non-root PID namespace but it tries to gather process info from its parent PID namespace. Please mount the proc file system properly, e.g. add the option '--mount-proc' for unshare command. Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/r/20211224124014.2492751-1-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-02-06perf session: Check for NULL pointer before dereferenceAmeer Hamza1-1/+2
Move NULL pointer check before dereferencing the variable. Addresses-Coverity: 1497622 ("Derereference before null check") Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Ameer Hamza <amhamza.mgc@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com> Cc: German Gomez <german.gomez@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Link: https://lore.kernel.org/r/20220125121141.18347-1-amhamza.mgc@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-02-06perf annotate: Set error stream of objdump process for TUINamhyung Kim1-0/+1
The stderr should be set to a pipe when using TUI. Otherwise it'd print to stdout and break TUI windows with an error message. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20220202070828.143303-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-02-06perf tools: Add missing branch_sample_type to perf_event_attr__fprintf()Anshuman Khandual1-1/+1
This updates branch sample type with missing PERF_SAMPLE_BRANCH_TYPE_SAVE. Suggested-by: James Clark <james.clark@arm.com> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lore.kernel.org/lkml/1643799443-15109-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.