aboutsummaryrefslogtreecommitdiffstats
path: root/scripts (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2007-11-05pata_hpt37x: Fix outstanding bug reports on the HPT374 and 37x cable detectAlan Cox1-13/+36
- Read frequency correctly - Correct cable detect handling - Fix wrong filter test Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-05ata_piix: Add additional PCI identifier for 40 wire short cableAlan Cox1-0/+1
Keeping the list in sync with the old IDE driver Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-05pata_serverworks: Fix problem with some drive combinationsAlan Cox1-6/+5
The driver used the channel not the device number for deciding where to load some timing parameters. Also change so that we clear the UDMA field as the old driver did. Not believed neccessary but does no harm. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-05phylib: Silence driver registrationOlof Johansson1-1/+1
It gets quite verbose to see every single PHY driver being registered by default. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-05phylib: Add ID for Marvell 88E1240Olof Johansson1-5/+18
Add PHY IDs for Marvell 88E1240. It seems to have close enough programming models to 1111/1112 for basic support at least. Also clean up whitespace in the ID list a bit. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-0582596: free nonexistent resource fixEvgeniy Dushistov1-1/+2
During booting of last vanilla kernel I got: Trying to free nonexistent resource... This because of if "ENABLE_APRICOT" is on we do: request_region(ioaddr,...) if (checksum test failed) goto out1; dev->base_addr = ioaddr;//<-here mistake out1: release_region(dev->base_addr,...) This change fixes this bug for me. Signed-off-by: Evgeniy Dushistov <dushistov@mail.ru> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-05SUNHME: Fix missing NETIF_F_VLAN_CHALLENGED on PCI happy mealsDavid Miller1-2/+2
No HME parts can do VLANs correctly. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-05leds: bugfixes for leds-gpioDavid Brownell1-9/+11
Three bugfixes to the leds-gpio driver, plus minor whitespace tweaks: - Do the INIT_WORK() before registering each LED, so if its trigger becomes immediately active it can schedule work without oopsing.. - Use normal registration, not platform_driver_probe(), so that devices appearing "late" (hotplug type) can still be bound. - Mark the driver remove code as "__devexit", preventing oopses when the underlying device is removed. These issues came up when using this driver with some GPIO expanders living on serial busses, which act unlike "normal" platform devices: they can appear and vanish along with the serial bus driver. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-11-05PCI: Add Kconfig option to disable deprecated pci_find_* APIJeff Garzik12-26/+52
Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-05PCI: pciserial_resume_one ignored return value of pci_enable_deviceDirk Hohndel1-1/+4
[PATCH] pciserial_resume_one ignored return value of pci_enable_device Signed-off-by: Dirk Hohndel <hohndel@linux.intel.com> Acked-by: Alan Cox <alan@redhat.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-05PCI Hotplug: cpqhp_pushbutton_thread(): remove a pointless if() checkAdrian Bunk1-9/+7
The Coverity checker spotted that we'd have already oops'ed if "ctrl" was NULL. Additionally, "func" had just been checked for not being NULL. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-05PCI: make pci_match_device() staticAdrian Bunk2-5/+2
pci_match_device() no longer has any other users. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-05PCI: Remove 3 incorrect MSI quirks.David Miller2-6/+0
Now that we have dealt with the real issue, in that some ATI SATA and USB controllers needed the INTX_DISABLE quirk, we can remove these AMD chipset global MSI disabling quirks. This reverts three changesets: 4be8f906435a6af241821ab5b94b2b12cb7d57d8 (PCI: disable MSI on RS690) aea6a433f50cd89b9cbd10850fd0b32f961f9883 (PCI: disable MSI on RD580) f122392f679ebed39db08074f935d770504623eb (PCI: disable MSI on RX790) This is based upon testing and feedback from Shane Huang <Shane.Huang@amd.com>. Cc: Shane Huang <Shane.Huang@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-05PCI: Add MSI INTX_DISABLE quirks for ATI SB700/800 SATA and IXP SB400 USBDavid Miller1-0/+20
Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-05PCI: Add quirk for devices which disable MSI when INTX_DISABLE is set.David Miller4-15/+45
A reasonably common problem with some devices is that they will disable MSI generation when the INTX_DISABLE bit is set in the PCI_COMMAND register. Quirk this explicitly, guarding the pci_intx() calls in msi.c with this quirk indication. The first entries for this quirk are for 5714 and 5780 Tigon3 chips, and thus we can remove the workaround code from the tg3.c driver. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Michael Chan <mchan@broadcom.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-05PCI: Add MSI quirk for ServerWorks HT1000 PCIX bridge.David Miller2-0/+4
This is the fix for the following problem: https://bugzilla.redhat.com/show_bug.cgi?id=227657 The bnx2 device 5706 complains about MSI not working behind a ServerWorks HT1000 PCIX bridge. An earlier commit to fix the problem: e3008dedff4bdc96a5f67224cd3d8d12237082a0: "PCI: disable MSI by default on systems with Serverworks HT1000 chips" was not entirely correct, and has been reverted. MSI does not work on the PCIX bus because the BIOS did not set the HT_MSI_FLAGS_ENABLE bit in the HyperTransport MSI capability on the bridge. We use the existing quirk_msi_ht_cap() to detect the problem and disable MSI in all buses behind it. Signed-off-by: Michael Chan <mchan@broadcom.com> Cc: Anantha Subramanyam <ananth@broadcom.com> Cc: Naren Sankar <nsankar@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-05PCI: Revert "PCI: disable MSI by default on systems with Serverworks HT1000 chips"David Miller2-2/+0
This reverts commit e3008dedff4bdc96a5f67224cd3d8d12237082a0. The real bug was an INTX issue in the tg3 ethernet chip, and cured by commit c129d962a66c76964954a98b38586ada82cf9381 Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-05ide: fix IDE_HFLAG_NO_ATAPI_DMA handling in config_drive_for_dma()Bartlomiej Zolnierkiewicz1-1/+1
commit 33c1002ed912ac9dacedd5d5b166da3b72d18460 incorrectly changed return value from '0' to '-1', fix it (ns87415 was the only host driver affected since it uses both IDE_HFLAG_TRUST_BIOS_FOR_DMA and IDE_HFLAG_NO_ATAPI_DMA). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-11-05ide: move ide_fixstring() documentation to ide-iops.c from ide.hBartlomiej Zolnierkiewicz2-8/+8
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-11-05ide: add missing #ifdef/#endif CONFIG_IDE_TASK_IOCTLBartlomiej Zolnierkiewicz1-0/+2
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-11-05ide: fix ide_find_dma_mode() to print human-readable infoBartlomiej Zolnierkiewicz1-1/+2
Problem reported by Mikael. Cc: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-11-05ide: add missing rq.ref_count initialization to ide_diag_taskfile()Bartlomiej Zolnierkiewicz1-0/+1
Noticed by Tejun Heo. Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-11-05ide: clear HOB bit for REQ_TYPE_ATA_TASK requests in ide_end_drive_cmd()Bartlomiej Zolnierkiewicz1-0/+2
ide_dump_ata_status() may set HOB bit before ide_end_drive_cmd() is called. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-11-05ide: check rq->cmd_type in drive_cmd_intr()Bartlomiej Zolnierkiewicz1-1/+2
drive_cmd_intr() is used by both REQ_TYPE_ATA_CMD and REQ_TYPE_ATA_TASK but commands using PIO-in protocol are valid only for REQ_TYPE_ATA_CMD (&args[4] in case of REQ_TYPE_ATA_TASK points to a value for IDE_LCYL_REG register instead of the data buffer). This fix allows REQ_TYPE_ATA_TASK commands to use non-zero values for IDE_SECTOR_REG (args[3]). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-11-05ide/Kconfig: fix BLK_DEV_OFFBOARD dependenciesBartlomiej Zolnierkiewicz1-1/+2
This config option is effective only for host drivers that use IDE_HFLAG_OFF_BOARD host flag (aec62xx, generic, hpt34x, hpt366, pdc202xx_new, pdc202xx_old and tc86c001). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-11-05ide: unexport ide_fix_driveidAdrian Bunk1-3/+0
ide_fix_driveid can now be unexported. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-11-05ide/Kconfig: add IDEDISK_MULTI_MODE text adapted from hdparm manual pageMatti Linnanvuori1-3/+16
Add IDEDISK_MULTI_MODE text adapted from hdparm manual page. Signed-off-by: Matti Linnanvuori <mattilinnanvuori@yahoo.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-11-05ide: do_identify() string termination fixTejun Heo1-2/+3
Terminates id->model string before invoking strstr() in do_identify(). Signed-off-by: Tejun Heo <tj@home-tj.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-11-05piix: add support for ICH7 on Acer 5602aWLMisebdeg@ngi.it1-0/+1
In piix.c (and in ata_piix.c) are already included some patches to skip the cable check on some laptops and to enable UDMA > 33 modes, but I've noticed than theese doesn't work on my Acer Aspire 5602WLMi (maybe exist more versions of this laptop). With this simple patch I can set transfer mode to UDMA100. From: "sebdeg@ngi.it" <sebdeg@ngi.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-11-05cpm_load_patch() - declartion conflictKamalesh Babulal1-1/+1
Commit f2a0bd3753dad7ea4605ebd5435716b39e9f92bb defines the function with "void cpm_load_patch(cpm8xx_t *cp)" prtotype and is declared as "extern void cpm_load_patch(volatile immap_t *immr)" in the header file. Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-05SLUB: Fix memory leak by not reusing cpu_slabChristoph Lameter1-19/+1
Fix the memory leak that may occur when we attempt to reuse a cpu_slab that was allocated while we reenabled interrupts in order to be able to grow a slab cache. The per cpu freelist may contain objects and in that situation we may overwrite the per cpu freelist pointer loosing objects. This only occurs if we find that the concurrently allocated slab fits our allocation needs. If we simply always deactivate the slab then the freelist will be properly reintegrated and the memory leak will go away. Signed-off-by: Christoph Lameter <clameter@sgi.com> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-05lguest: tidy up documentationRusty Russell1-22/+21
After Adrian Bunk's "make async_hcall static" moved things around, update comments to match (aka "make Guest"). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-11-05kernel/futex.c: make 3 functions staticAdrian Bunk2-11/+4
The following functions can now become static again: - get_futex_key() - get_futex_key_refs() - drop_futex_key_refs() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-11-05unexport access_process_vmAdrian Bunk1-1/+0
This patch removes the no longer used EXPORT_SYMBOL_GPL(access_process_vm). Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-11-05lguest: make async_hcall() staticAdrian Bunk2-16/+13
async_hcall() can become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-11-05[S390] tod clock: announce clocksource as perfectChristian Borntraeger1-1/+1
The Time of Day clock is the standard time source for s390. It is - monotonic - allows very fast reading - architecture guarantees at least microsecond stepping - available as part of the architecture We should announce the rate of tod as 400 to be in sync with the description found in clocksource.h: "400-499:Perfect The ideal clocksource. A must-use where available." This change will prefer tod over less reliable clock sources. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-11-05[S390] Rename "idle_time" attribute to "idle_time_us".Heiko Carstens1-3/+3
Seems that people prefer to have the unit encoded in the attribute name. Also makes parsing easier. Now we have: # cat /sys/devices/system/cpu/cpu0/idle_time_us 131473592 instead of # cat /sys/devices/system/cpu/cpu0/idle_time 131473592 us Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-11-05[S390] Fix priority mistakes in drivers/s390/cio/cmf.cRoel Kluin1-2/+2
Fixes priority mistakes similar to '!x & y' Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-11-05[S390] Fix memory detection.Heiko Carstens1-1/+3
Yet another patch in the countless series of memory detection fixes: if the last area of the reported storage size is a hole the detection loop will loop forever. Just break chunk detection loop if its end is going to be larger than reported storage size. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-11-05[S390] Fix compile on !CONFIG_SMP.Heiko Carstens1-2/+6
Commit fae8b22d3e3e3a3d317a7746493997af02a3f35c "[S390] Add per-cpu idle time / idle count sysfs attributes" causes a link error on !CONFIG_SMP. Fix this by adding some #ifdef's. Real fix would be to cleanup the code since we don't register a cpu on !CONFIG_SMP. But that would be quite a big patch. For the time being this is good enough. arch/s390/kernel/built-in.o: In function `do_monitor_call': (.text+0x50d4): undefined reference to `per_cpu__s390_idle' arch/s390/kernel/built-in.o: In function `cpu_idle': (.text+0x518c): undefined reference to `per_cpu__s390_idle' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-11-05[S390] device_schedule_callback() for dcssblk.Gerald Schaefer1-2/+7
Unregistering a device from within a device attribute handler leads to a deadlock. Need to use device_schedule_callback() to unregister device in error path. Signed-off-by: Gerald Schaefer <geraldsc@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-11-05[S390] Fix smsgiucv init on no iucv machinesChristian Borntraeger1-0/+4
smsgiucv is a driver that relies on iucv to work properly. If iucv ans smsgiucv are compiled into the kernel and run on an lpar the following scenario happens: iucv is initialized early as a subsystem. It checks for z/VM and returns with EPROTONOTSUPPORT. Later smsgiucv tries to run driver_register with iucv_bus as bus. As this bus is not initialized the driver core and list debugging issue several warnings and oopses. Solution is to let smsgiucv also check for z/VM and return EPROTONOTSUPPORT as well. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-11-05[S390] cio: use INIT_WORK to initialize struct work.Heiko Carstens1-1/+1
Use INIT_WORK to initialize struct work and don't initialize a struct work partial by explicitly initializing its private structures. Fixes the following lockdep bug because no key was assigned: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. 0000000001f07bb8 0000000001f07bf8 0000000000000002 0000000000000000 0000000001f07c98 0000000001f07c10 0000000001f07c10 0000000000015406 0000000000000000 0000000000000002 0000000000000000 0000000000000000 0000000001f07bf8 000000000000000c 0000000001f07bf8 0000000001f07c68 000000000039ae60 0000000000015406 0000000001f07bf8 0000000001f07c48 Call Trace: ([<0000000000015376>] show_trace+0xda/0x104) [<0000000000015460>] show_stack+0xc0/0xf8 [<00000000000154c6>] dump_stack+0x2e/0x3c [<000000000006a71e>] __lock_acquire+0x47e/0x11a0 [<000000000006b4f0>] lock_acquire+0xb0/0xd8 [<00000000000555a6>] run_workqueue+0x1aa/0x24c [<00000000000556de>] worker_thread+0x96/0xf4 [<000000000005c210>] kthread+0x90/0xb4 [<000000000001947a>] kernel_thread_starter+0x6/0xc [<0000000000019474>] kernel_thread_starter+0x0/0xc Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-11-04libata: Don't disable dipm with SET FEATURESKristen Carlson Accardi1-8/+10
LPM seems to get hung up while disabling DIPM, and after thinking about this a bit, I don't think we really need to manually disable it anyway. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-04libata and bogus LBA48 drivesGeert Uytterhoeven1-0/+2
A colleague noticed recent versions of Ubuntu no longer detect his 80 GB ST380020ACE drive. This drive is special in that it advertises LBA48 support, but has the lba_capacity_2 field set to zero (cfr. http://lkml.org/lkml/2004/3/30/163). Upon closer look, libata indeed doesn't seem to handle this case yet. Below is an (untested) fix. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-04x86 setup: set %ebx == %ebp == %edi == 0 on protected mode entryH. Peter Anvin1-1/+3
In accordance with the newly formalized 32-bit boot protocol, set %ebx == %ebp == %edi == 0 in order to support future extensions to the protocol. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2007-11-04x86 setup: add a near jump to serialize %cr0 on 386/486H. Peter Anvin1-2/+2
The 386 and 486 needs a jump immediately after setting %cr0 in order to serialize the pipeline. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2007-11-05drm/sis: missing mutex unlock in error path.Roel Kluin1-0/+1
airlied: separated this out from a patch on lkml. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-11-05radeon: set the address to access the GART table on the CPU side correctlyDave Airlie2-2/+4
This code relied on the CPU and GPU address for the aperture being the same, On some r5xx hardware I was playing with I noticed that this isn't always true. This fixes issues seen on some r400 cards. (bugs.freedesktop.org 9957) Signed-off-by: Dave Airlie <airlied@redhat.com>
2007-11-04V4L/DVB (6548): pvrusb2: Fix oops on module removalMike Isely1-3/+2
The pvrusb2 driver is tearing down its sysfs related pieces in the incorrect order. This leaves dangling pointers which causes the kernel device core to oops. The problem has been present virtually forever but became malignant with the changeover to the way of handling /sys/class. Fix is just to make sure we don't tear down the class structure until AFTER the driver instances are deregistered. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.