aboutsummaryrefslogtreecommitdiffstats
path: root/scripts (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-03-26kconfig: remove duplicated file name and lineno of recursive inclusionMasahiro Yamada2-10/+10
As in the unit test, the error message for the recursive inclusion looks like this: Kconfig.inc1:4: recursive inclusion detected. Inclusion path: current file : 'Kconfig.inc1' included from: 'Kconfig.inc3:1' included from: 'Kconfig.inc2:3' included from: 'Kconfig.inc1:4' The 'Kconfig.inc1:4' is duplicated in the first and last lines. Also, the single quotes do not help readability. Change the message like follows: Recursive inclusion detected. Inclusion path: current file : Kconfig.inc1 included from: Kconfig.inc3:1 included from: Kconfig.inc2:3 included from: Kconfig.inc1:4 Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-26kconfig: do not include both curses.h and ncurses.h for nconfigMasahiro Yamada1-3/+1
nconf.h includes <curses.h> and "ncurses.h", but it does not need to include both. Generally, it should fall back to curses.h only when ncurses.h is not found. But, looks like it has never happened; these includes have been here for many years since commit 692d97c380c6 ("kconfig: new configuration interface (nconfig)"), and nobody has complained about hard-coding of ncurses.h . Let's simply drop the curses.h inclusion. I replaced "ncurses.h" with <ncurses.h> since it is not a local file. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-26kconfig: make unmet dependency warnings readableMasahiro Yamada3-55/+23
Currently, the unmet dependency warnings end up with endlessly long expressions, most of which are false positives. Here is test code to demonstrate how it currently works. [Test Case] config DEP1 def_bool y config DEP2 bool "DEP2" config A bool "A" select E config B bool "B" depends on DEP2 select E config C bool "C" depends on DEP1 && DEP2 select E config D def_bool n select E config E bool depends on DEP1 && DEP2 [Result] $ make config scripts/kconfig/conf --oldaskconfig Kconfig * * Linux Kernel Configuration * DEP2 (DEP2) [N/y/?] (NEW) n A (A) [N/y/?] (NEW) y warning: (A && B && D) selects E which has unmet direct dependencies (DEP1 && DEP2) Here, I see some points to be improved. First, '(A || B || D)' would make more sense than '(A && B && D)'. I am not sure if this is intentional, but expr_simplify_unmet_dep() turns OR expressions into AND, like follows: case E_OR: return expr_alloc_and( Second, we see false positives. 'A' is a real unmet dependency. 'B' is false positive because 'DEP1' is fixed to 'y', and 'B' depends on 'DEP2'. 'C' was correctly dropped by expr_simplify_unmet_dep(). 'D' is also false positive because it has no chance to be enabled. Current expr_simplify_unmet_dep() cannot avoid those false positives. After all, I decided to use the same helpers as used for printing reverse dependencies in the help. With this commit, unreadable warnings (most of the reported symbols are false positives) in the real world: $ make ARCH=score allyesconfig scripts/kconfig/conf --allyesconfig Kconfig warning: (HWSPINLOCK_QCOM && AHCI_MTK && STMMAC_PLATFORM && DWMAC_IPQ806X && DWMAC_LPC18XX && DWMAC_OXNAS && DWMAC_ROCKCHIP && DWMAC_SOCFPGA && DWMAC_STI && TI_CPSW && PINCTRL_GEMINI && PINCTRL_OXNAS && PINCTRL_ROCKCHIP && PINCTRL_DOVE && PINCTRL_ARMADA_37XX && PINCTRL_STM32 && S3C2410_WATCHDOG && VIDEO_OMAP3 && VIDEO_S5P_FIMC && USB_XHCI_MTK && RTC_DRV_AT91SAM9 && LPC18XX_DMAMUX && VIDEO_OMAP4 && COMMON_CLK_GEMINI && COMMON_CLK_ASPEED && COMMON_CLK_NXP && COMMON_CLK_OXNAS && COMMON_CLK_BOSTON && QCOM_ADSP_PIL && QCOM_Q6V5_PIL && QCOM_GSBI && ATMEL_EBI && ST_IRQCHIP && RESET_IMX7 && PHY_HI6220_USB && PHY_RALINK_USB && PHY_ROCKCHIP_PCIE && PHY_DA8XX_USB) selects MFD_SYSCON which has unmet direct dependencies (HAS_IOMEM) warning: (PINCTRL_AT91 && PINCTRL_AT91PIO4 && PINCTRL_OXNAS && PINCTRL_PISTACHIO && PINCTRL_PIC32 && PINCTRL_MESON && PINCTRL_NOMADIK && PINCTRL_MTK && PINCTRL_MT7622 && GPIO_TB10X) selects OF_GPIO which has unmet direct dependencies (GPIOLIB && OF && HAS_IOMEM) warning: (FAULT_INJECTION_STACKTRACE_FILTER && LATENCYTOP && LOCKDEP) selects FRAME_POINTER which has unmet direct dependencies (DEBUG_KERNEL && (CRIS || M68K || FRV || UML || SUPERH || BLACKFIN || MN10300 || METAG) || ARCH_WANT_FRAME_POINTERS) will be turned into: $ make ARCH=score allyesconfig scripts/kconfig/conf --allyesconfig Kconfig WARNING: unmet direct dependencies detected for MFD_SYSCON Depends on [n]: HAS_IOMEM [=n] Selected by [y]: - PINCTRL_STM32 [=y] && PINCTRL [=y] && (ARCH_STM32 || COMPILE_TEST [=y]) && OF [=y] - RTC_DRV_AT91SAM9 [=y] && RTC_CLASS [=y] && (ARCH_AT91 || COMPILE_TEST [=y]) - RESET_IMX7 [=y] && RESET_CONTROLLER [=y] - PHY_HI6220_USB [=y] && (ARCH_HISI && ARM64 || COMPILE_TEST [=y]) - PHY_RALINK_USB [=y] && (RALINK || COMPILE_TEST [=y]) - PHY_ROCKCHIP_PCIE [=y] && (ARCH_ROCKCHIP && OF [=y] || COMPILE_TEST [=y]) WARNING: unmet direct dependencies detected for OF_GPIO Depends on [n]: GPIOLIB [=y] && OF [=y] && HAS_IOMEM [=n] Selected by [y]: - PINCTRL_MTK [=y] && PINCTRL [=y] && (ARCH_MEDIATEK || COMPILE_TEST [=y]) && OF [=y] - PINCTRL_MT7622 [=y] && PINCTRL [=y] && (ARCH_MEDIATEK || COMPILE_TEST [=y]) && OF [=y] && (ARM64 || COMPILE_TEST [=y]) WARNING: unmet direct dependencies detected for FRAME_POINTER Depends on [n]: DEBUG_KERNEL [=y] && (CRIS || M68K || FRV || UML || SUPERH || BLACKFIN || MN10300 || METAG) || ARCH_WANT_FRAME_POINTERS [=n] Selected by [y]: - LATENCYTOP [=y] && DEBUG_KERNEL [=y] && STACKTRACE_SUPPORT [=y] && PROC_FS [=y] && !MIPS && !PPC && !S390 && !MICROBLAZE && !ARM_UNWIND && !ARC && !X86 Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
2018-03-26kconfig: warn unmet direct dependency of tristate symbols selected by yMasahiro Yamada1-2/+2
Commit 246cf9c26bf1 ("kbuild: Warn on selecting symbols with unmet direct dependencies") forcibly promoted ->dir_dep.tri to yes from mod. So, the unmet direct dependencies of tristate symbols are not reported. [Test Case] config MODULES def_bool y option modules config A def_bool y select B config B tristate "B" depends on m This causes unmet dependency because 'B' is forced 'y' ignoring 'depends on m'. This should be warned. On the other hand, the following case ('B' is bool) should not be warned, so 'depends on m' for bool symbols should be naturally treated as 'depends on y'. [Test Case2 (not unmet dependency)] config MODULES def_bool y option modules config A def_bool y select B config B bool "B" depends on m Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-26kconfig: tests: test if recursive inclusion is detectedMasahiro Yamada6-0/+24
If recursive inclusion is detected, it should fail with error messages. Test this. This also tests the line numbers in the error message, fixed by commit 5ae6fcc4bb82 ("kconfig: fix line number in recursive inclusion error message"). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-26kconfig: tests: test if recursive dependencies are detectedMasahiro Yamada3-0/+101
Recursive dependency should be detected and warned. Test this. This indirectly tests the line number increments. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-26kconfig: tests: test randconfig for choice in choiceMasahiro Yamada5-0/+60
Commit 3b9a19e08960 ("kconfig: loop as long as we changed some symbols in randconfig") fixed randconfig where a choice contains a sub-choice. Prior to that commit, the sub-choice values were not set. I am not sure whether this is an intended feature or just something people discovered works, but it is used in the real world; drivers/usb/gadget/legacy/Kconfig is source'd in a choice context, then creates a sub-choice in it. For the test case in this commit, there are 3 possible results. Case 1: CONFIG_A=y # CONFIG_B is not set Case 2: # CONFIG_A is not set CONFIG_B=y CONFIG_C=y # CONFIG_D is not set Case 3: # CONFIG_A is not set CONFIG_B=y # CONFIG_C is not set CONFIG_D=y CONFIG_E=y So, this test iterates several times, and checks if the result is either of the three. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-26kconfig: tests: test defconfig when two choices interactMasahiro Yamada4-0/+42
Commit fbe98bb9ed3d ("kconfig: Fix defconfig when one choice menu selects options that another choice menu depends on") fixed defconfig when two choices interact (i.e. calculating the visibility of a choice requires to calculate another choice). The test code in that commit log was based on the real world example, and complicated. So, I shrunk it down to the following: defconfig.choice: ---8<--- CONFIG_CHOICE_VAL0=y ---8<--- ---8<--- config MODULES def_bool y option modules choice prompt "Choice" config CHOICE_VAL0 tristate "Choice 0" config CHOICE_VAL1 tristate "Choice 1" endchoice choice prompt "Another choice" depends on CHOICE_VAL0 config DUMMY bool "dummy" endchoice ---8<--- Prior to commit fbe98bb9ed3d, $ scripts/kconfig/conf --defconfig=defconfig.choice Kconfig.choice resulted in: CONFIG_MODULES=y CONFIG_CHOICE_VAL0=m # CONFIG_CHOICE_VAL1 is not set CONFIG_DUMMY=y where the expected result would be: CONFIG_MODULES=y CONFIG_CHOICE_VAL0=y # CONFIG_CHOICE_VAL1 is not set CONFIG_DUMMY=y Roughly, this weird behavior happened like this: Symbols are calculated a couple of times. First, all symbols are calculated in conf_read(). The first 'choice' is evaluated to 'y' due to the SYMBOL_DEF_USER flag, but sym_calc_choice() clears it unless all of its choice values are explicitly set by the user. conf_set_all_new_symbols() clears all SYMBOL_VALID flags. Then, only choices are calculated. Here, the SYMBOL_DEF_USER for the first choice has been forgotten, so it is evaluated to 'm'. set_all_choice_values() sets SYMBOL_DEF_USER again to choice symbols. When calculating the second choice, due to 'depends on CHOICE_VAL0', it triggers the calculation of CHOICE_VAL0. As a result, SYMBOL_VALID is set for CHOICE_VAL0. Symbols except choices get the final chance of re-calculation in conf_write(). In a normal case, CHOICE_VAL0 would be re-calculated, then the first choice would be indirectly re-calculated with the SYMBOL_DEF_USER which has been recalled by set_all_choice_values(), which would be evaluated to 'y'. But, in this case, CHOICE_VAL0 has already been marked as SYMBOL_VALID, so this re-calculation does not happen. Then, =m from the conf_set_all_new_symbols() phase is written out to the .config file. Add a unit test for this naive case. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-26kconfig: tests: check visibility of tristate choice values in y choiceMasahiro Yamada5-0/+43
If tristate choice values depend on symbols set to 'm', they should be hidden when the choice containing them is changed from 'm' to 'y' (i.e. exclusive choice). This issue was fixed by commit fa64e5f6a35e ("kconfig/symbol.c: handle choice_values that depend on 'm' symbols"). Add a test case to avoid regression. For the input in this unit test, there is a room for argument if "# CONFIG_CHOICE1 is not set" should be written to the .config file. After commit fa64e5f6a35e, this line was written to the .config file. With commit cb67ab2cd2b8 ("kconfig: do not write choice values when their dependency becomes n"), it is not written now. In this test, "# CONFIG_CHOICE1 is not set" is don't care. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-26kconfig: tests: check unneeded "is not set" with unmet dependencyMasahiro Yamada4-0/+39
Commit cb67ab2cd2b8 ("kconfig: do not write choice values when their dependency becomes n") fixed a problem where "# CONFIG_... is not set" for choice values are wrongly written into the .config file when they are once visible, then become invisible later. Add a test for this naive case. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-26kconfig: tests: test if new symbols in choice are askedMasahiro Yamada4-0/+64
If new choice values are added with new dependency, and they become visible during user configuration, oldconfig should recognize them as (NEW), and ask the user for choice. This issue was fixed by commit 5d09598d488f ("kconfig: fix new choices being skipped upon config update"). This is a subtle corner case. Add a test case to avoid breakage. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-26kconfig: tests: test automatic submenu creationMasahiro Yamada3-0/+72
If a symbols has dependency on the preceding symbol, the menu entry should become the submenu of the preceding one, and displayed with deeper indentation. This is done by restructuring the menu tree in menu_finalize(). It is a bit complicated computation, so let's add a test case. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-26kconfig: tests: add basic choice testsMasahiro Yamada9-0/+149
The calculation of 'choice' is a bit complicated part in Kconfig. The behavior of 'y' choice is intuitive. If choice values are tristate, the choice can be 'm' where each value can be enabled independently. Also, if a choice is marked as 'optional', the whole choice can be invisible. Test basic functionality of choice. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-26kconfig: tests: add framework for Kconfig unit testingMasahiro Yamada3-0/+306
Many parts in Kconfig are so cryptic and need refactoring. However, its complexity prevents us from moving forward. There are several naive corner cases where it is difficult to notice breakage. If those are covered by unit tests, we will be able to touch the code with more confidence. Here is a simple test framework based on pytest. The conftest.py provides a fixture useful to run commands such as 'oldaskconfig' etc. and to compare the resulted .config, stdout, stderr with expectations. How to add test cases? ---------------------- For each test case, you should create a subdirectory under scripts/kconfig/tests/ (so test cases are separated from each other). Every test case directory should contain the following files: - __init__.py: describes test functions - Kconfig: the top level Kconfig file for the test To do a useful job, test cases generally need additional data like input .config and information about expected results. How to run tests? ----------------- You need python3 and pytest. Then, run "make testconfig". O= option is supported. If V=1 is given, detailed logs captured during tests are displayed. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-26kconfig: remove redundant streamline_config.pl prerequisiteUlf Magnusson1-4/+4
The local{yes,mod}config targets currently have streamline_config.pl as a prerequisite. This is redundant, because streamline_config.pl is a checked-in file with no prerequisites. Remove the prerequisite and reference streamline_config.pl directly in the recipe of the rule instead. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-26kconfig: rename silentoldconfig to syncconfigMasahiro Yamada2-13/+20
As commit cedd55d49dee ("kconfig: Remove silentoldconfig from help and docs; fix kconfig/conf's help") mentioned, 'silentoldconfig' is a historical misnomer. That commit removed it from help and docs since it is an internal interface. If so, it should be allowed to rename it to something more intuitive. 'syncconfig' is the one I came up with because it updates the .config if necessary, then synchronize include/generated/autoconf.h and include/config/* with it. You should not manually invoke 'silentoldcofig'. Display warning if used in case existing scripts are doing wrong. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-26kconfig: invoke oldconfig instead of silentoldconfig from local*configMasahiro Yamada1-2/+2
The purpose of local{yes,mod}config is to arrange the .config file based on actually loaded modules. It is unnecessary to update include/generated/autoconf.h and include/config/* stuff here. They will be updated as needed during the build. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-26kconfig: hide irrelevant sub-menus for oldconfigMasahiro Yamada1-3/+6
Historically, "make oldconfig" has changed its behavior several times, quieter or louder. (I attached the history below.) Currently, it is not as quiet as it should be. This commit addresses it. Test Case --------- ---------------------------(Kconfig)---------------------------- menu "menu" config FOO bool "foo" menu "sub menu" config BAR bool "bar" endmenu endmenu menu "sibling menu" config BAZ bool "baz" endmenu ---------------------------------------------------------------- ---------------------------(.config)---------------------------- CONFIG_BAR=y CONFIG_BAZ=y ---------------------------------------------------------------- With the Kconfig and .config above, "make silentoldconfig" and "make oldconfig" work differently, like follows: $ make silentoldconfig scripts/kconfig/conf --silentoldconfig Kconfig * * Restart config... * * * menu * foo (FOO) [N/y/?] (NEW) y # # configuration written to .config # $ make oldconfig scripts/kconfig/conf --oldconfig Kconfig * * Restart config... * * * menu * foo (FOO) [N/y/?] (NEW) y * * sub menu * bar (BAR) [Y/n/?] y # # configuration written to .config # Both hide "sibling node" since it is irrelevant. The difference is that silentoldconfig hides "sub menu" whereas oldconfig does not. The behavior of silentoldconfig is preferred since the "sub menu" does not contain any new symbol. The root cause is in conf(). There are three input modes that can call conf(); oldaskconfig, oldconfig, and silentoldconfig. Everytime conf() encounters a menu entry, it calls check_conf() to check if it contains new symbols. If no new symbol is found, the menu is just skipped. Currently, this happens only when input_mode == silentoldconfig. The oldaskconfig enters into the check_conf() loop as silentoldconfig, so oldaskconfig works likewise for the second loop or later, but it never happens for oldconfig. So, irrelevant sub-menus are shown for oldconfig. Change the test condition to "input_mode != oldaskconfig". This is false only for the first loop of oldaskconfig; it must ask the user all symbols, so no need to call check_conf(). History of oldconfig -------------------- [0] Originally, "make oldconfig" was as loud as "make config" (It showed the entire .config file) [1] Commit cd9140e1e73a ("kconfig: make oldconfig is now less chatty") made oldconfig quieter, but it was still less quieter than silentoldconfig. (oldconfig did not hide sub-menus) [2] Commit 204c96f60904 ("kconfig: fix silentoldconfig") changed the input_mode of oldconfig to "ask_silent" from "ask_new". So, oldconfig really became as quiet as silentoldconfig. (oldconfig hided irrelevant sub-menus) [3] Commit 4062f1a4c030 ("kconfig: use long options in conf") made oldconfig as loud as [0] due to misconversion. [4] Commit 14828349719a ("kconfig: fix make oldconfig") addressed the misconversion of [3], but it made oldconfig quieter only to the same level as [1], not [2]. This commit is restoring the behavior of [2]. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-26kconfig: remove redundant input_mode test for check_conf() loopMasahiro Yamada1-1/+1
check_conf() never increments conf_cnt for listnewconfig, so conf_cnt is always zero. In other words, conf_cnt is not zero, "input_mode != listnewconfig" is met. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-26kconfig: remove unneeded input_mode test in conf()Masahiro Yamada1-3/+1
conf() is never called for listnewconfig / olddefconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-26kconfig: do not call check_conf() for olddefconfigMasahiro Yamada1-5/+5
check_conf() traverses the menu tree, but it is completely no-op for olddefconfig because the following if-else block does nothing. if (input_mode == listnewconfig) { ... } else if (input_mode != olddefconfig) { ... } As the help message says, olddefconfig automatically sets new symbols to their default value. There is no room for manual intervention. So, calling check_conf() for olddefconfig is odd in the first place. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-26kconfig: only write '# CONFIG_FOO is not set' for visible symbolsUlf Magnusson1-1/+2
=== Background === - Visible n-valued bool/tristate symbols generate a '# CONFIG_FOO is not set' line in the .config file. The idea is to remember the user selection without having to set a Makefile variable. Having n correspond to the variable being undefined in the Makefiles makes for easy CONFIG_* tests. - Invisible n-valued bool/tristate symbols normally do not generate a '# CONFIG_FOO is not set' line, because user values from .config files have no effect on invisible symbols anyway. Currently, there is one exception to this rule: Any bool/tristate symbol that gets the value n through a 'default' property generates a '# CONFIG_FOO is not set' line, even if the symbol is invisible. Note that this only applies to explicitly given defaults, and not when the symbol implicitly defaults to n (like bool/tristate symbols without 'default' properties do). This is inconsistent, and seems redundant: - As mentioned, the '# CONFIG_FOO is not set' won't affect the symbol once the .config is read back in. - Even if the symbol is invisible at first but becomes visible later, there shouldn't be any harm in recalculating the default value rather than viewing the '# CONFIG_FOO is not set' as a previous user value of n. === Changes === Change sym_calc_value() to only set SYMBOL_WRITE (write to .config) for non-n-valued 'default' properties. Note that SYMBOL_WRITE is always set for visible symbols regardless of whether they have 'default' properties or not, so this change only affects invisible symbols. This reduces the size of the x86 .config on my system by about 1% (due to removed '# CONFIG_FOO is not set' entries). One side effect of (and the main motivation for) this change is making the following two definitions behave exactly the same: config FOO bool config FOO bool default n With this change, neither of these will generate a '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied). That might make it clearer to people that a bare 'default n' is redundant. This change only affects generated .config files and not autoconf.h: autoconf.h only includes #defines for non-n bool/tristate symbols. === Testing === The following testing was done with the x86 Kconfigs: - .config files generated before and after the change were compared to verify that the only difference is some '# CONFIG_FOO is not set' entries disappearing. A couple of these were inspected manually, and most turned out to be from redundant 'default n/def_bool n' properties. - The generated include/generated/autoconf.h was compared before and after the change and verified to be identical. - As a sanity check, the same modification was done to Kconfiglib. The Kconfiglib test suite was then run to check for any mismatches against the output of the C implementation. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-26kconfig: Print reverse dependencies in groupsEugeniu Rosca3-13/+20
Surprisingly or not, disabling a CONFIG option (which is assumed to be unneeded) may be not so trivial. Especially it is not trivial, when this CONFIG option is selected by a dozen of other configs. Before the moment commit 1ccb27143360 ("kconfig: make "Selected by:" and "Implied by:" readable") popped up in v4.16-rc1, it was an absolute pain to break down the "Selected by" reverse dependency expression in order to identify all those configs which select (IOW *do not allow disabling*) a certain feature (assumed to be not needed). This patch tries to make one step further by putting at users' fingertips the revdep top level OR sub-expressions grouped/clustered by the tristate value they evaluate to. This should allow the users to directly concentrate on and tackle the _active_ reverse dependencies. To give some numbers and quantify the complexity of certain reverse dependencies, assuming commit 617aebe6a97e ("Merge tag 'usercopy-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux"), ARCH=arm64 and vanilla arm64 defconfig, here is the top 10 CONFIG options with the highest amount of top level "||" sub-expressions/tokens that make up the final "Selected by" reverse dependency expression. | Config | All revdep | Active revdep | |-------------------|------------|---------------| | REGMAP_I2C | 212 | 9 | | CRC32 | 167 | 25 | | FW_LOADER | 128 | 5 | | MFD_CORE | 124 | 9 | | FB_CFB_IMAGEBLIT | 114 | 2 | | FB_CFB_COPYAREA | 111 | 2 | | FB_CFB_FILLRECT | 110 | 2 | | SND_PCM | 103 | 2 | | CRYPTO_HASH | 87 | 19 | | WATCHDOG_CORE | 86 | 6 | The story behind the above is that users need to visually review/evaluate 212 expressions which *potentially* select REGMAP_I2C in order to identify the expressions which *actually* select REGMAP_I2C, for a particular ARCH and for a particular defconfig used. To make this experience smoother, change the way reverse dependencies are displayed to the user from [1] to [2]. [1] Old representation of DMA_ENGINE_RAID: Selected by: - AMCC_PPC440SPE_ADMA [=n] && DMADEVICES [=y] && (440SPe || 440SP) - BCM_SBA_RAID [=m] && DMADEVICES [=y] && (ARM64 [=y] || ... - FSL_RAID [=n] && DMADEVICES [=y] && FSL_SOC && ... - INTEL_IOATDMA [=n] && DMADEVICES [=y] && PCI [=y] && X86_64 - MV_XOR [=n] && DMADEVICES [=y] && (PLAT_ORION || ARCH_MVEBU [=y] ... - MV_XOR_V2 [=y] && DMADEVICES [=y] && ARM64 [=y] - XGENE_DMA [=n] && DMADEVICES [=y] && (ARCH_XGENE [=y] || ... - DMATEST [=n] && DMADEVICES [=y] && DMA_ENGINE [=y] [2] New representation of DMA_ENGINE_RAID: Selected by [y]: - MV_XOR_V2 [=y] && DMADEVICES [=y] && ARM64 [=y] Selected by [m]: - BCM_SBA_RAID [=m] && DMADEVICES [=y] && (ARM64 [=y] || ... Selected by [n]: - AMCC_PPC440SPE_ADMA [=n] && DMADEVICES [=y] && (440SPe || ... - FSL_RAID [=n] && DMADEVICES [=y] && FSL_SOC && ... - INTEL_IOATDMA [=n] && DMADEVICES [=y] && PCI [=y] && X86_64 - MV_XOR [=n] && DMADEVICES [=y] && (PLAT_ORION || ARCH_MVEBU [=y] ... - XGENE_DMA [=n] && DMADEVICES [=y] && (ARCH_XGENE [=y] || ... - DMATEST [=n] && DMADEVICES [=y] && DMA_ENGINE [=y] Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: Petr Vorel <pvorel@suse.cz> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-26kconfig: clean-up reverse dependency help implementationMasahiro Yamada2-17/+23
This commit splits out the special E_OR handling ('-' instead of '||') into a dedicated helper expr_print_revdev(). Restore the original expr_print() prior to commit 1ccb27143360 ("kconfig: make "Selected by:" and "Implied by:" readable"). This makes sense because: - We need to chop those expressions only when printing the reverse dependency, and only when E_OR is encountered - Otherwise, it should be printed as before, so fall back to expr_print() This also improves the behavior; for a single line, it was previously displayed in the same line as "Selected by", like this: Selected by: A [=n] && B [=n] This will be displayed in a new line, consistently: Selected by: - A [=n] && B [=n] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Petr Vorel <pvorel@suse.cz>
2018-03-26checkpatch: kconfig: prefer 'help' over '---help---'Ulf Magnusson1-1/+5
IMO, we should discourage '---help---' for new help texts, even in cases where it would be consistent with other help texts in the file. This will help if we ever want to get rid of '---help---' in the future. Also simplify the code to only check for exactly '---help---'. Since commit c2264564df3d ("kconfig: warn of unhandled characters in Kconfig commands"), '---help---' is a proper keyword and can only appear in that form. Prior to that commit, '---help---' working was more of a syntactic quirk. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-26checkpatch: kconfig: check help texts for menuconfig and choiceUlf Magnusson1-2/+11
Currently, only Kconfig symbols are checked for a missing or short help text, and are only checked if they are defined with the 'config' keyword. To make the check more general, extend it to also check help texts for choices and for symbols defined with the 'menuconfig' keyword. This increases the accuracy of the check for symbols that would already have been checked as well, since e.g. a 'menuconfig' symbol after a help text will be recognized as ending the preceding symbol/choice definition. To increase the accuracy of the check further, also recognize 'if', 'endif', 'menu', 'endmenu', 'endchoice', and 'source' as ending a symbol/choice definition. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-26checkpatch: kconfig: recognize more prompts when checking help textsUlf Magnusson1-1/+1
The check for a missing or short help text only considers symbols with a prompt, but doesn't recognize any of the following as a prompt: bool 'foo' tristate 'foo' prompt "foo" prompt 'foo' Make the check recognize those too. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-09kbuild: Handle builtin dtb file names containing hyphensJames Hogan1-4/+4
cmd_dt_S_dtb constructs the assembly source to incorporate a devicetree FDT (that is, the .dtb file) as binary data in the kernel image. This assembly source contains labels before and after the binary data. The label names incorporate the file name of the corresponding .dtb file. Hyphens are not legal characters in labels, so .dtb files built into the kernel with hyphens in the file name result in errors like the following: bcm3368-netgear-cvg834g.dtb.S: Assembler messages: bcm3368-netgear-cvg834g.dtb.S:5: Error: : no such section bcm3368-netgear-cvg834g.dtb.S:5: Error: junk at end of line, first unrecognized character is `-' bcm3368-netgear-cvg834g.dtb.S:6: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_begin:' bcm3368-netgear-cvg834g.dtb.S:8: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_end:' bcm3368-netgear-cvg834g.dtb.S:9: Error: : no such section bcm3368-netgear-cvg834g.dtb.S:9: Error: junk at end of line, first unrecognized character is `-' Fix this by updating cmd_dt_S_dtb to transform all hyphens from the file name to underscores when constructing the labels. As of v4.16-rc2, 1139 .dts files across ARM64, ARM, MIPS and PowerPC contain hyphens in their names, but the issue only currently manifests on Broadcom MIPS platforms, as that is the only place where such files are built into the kernel. For example when CONFIG_DT_NETGEAR_CVG834G=y, or on BMIPS kernels when the dtbs target is used (in the latter case it admittedly shouldn't really build all the dtb.o files, but thats a separate issue). Fixes: 695835511f96 ("MIPS: BMIPS: rename bcm96358nb4ser to bcm6358-neufbox4-sercom") Signed-off-by: James Hogan <jhogan@kernel.org> Reviewed-by: Frank Rowand <frowand.list@gmail.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: <stable@vger.kernel.org> # 4.9+ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-09scripts/bloat-o-meter: fix typos in helpMatteo Croce1-1/+1
The bloat-o-meter script has two typos in the help, fix both. Fixes: 192efb7a1f9b ("bloat-o-meter: provide 3 different arguments for data, function and All") Signed-off-by: Matteo Croce <mcroce@redhat.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-05fixdep: do not ignore kconfig.hRasmus Villemoes1-1/+0
kconfig.h was excluded from consideration by fixdep by 6a5be57f0f00 (fixdep: fix extraneous dependencies) to avoid some false positive hits (1) include/config/.h (2) include/config/h.h (3) include/config/foo.h (1) occurred because kconfig.h contains the string CONFIG_ in a comment. However, since dee81e988674 (fixdep: faster CONFIG_ search), we have a check that the part after CONFIG_ is non-empty, so this does not happen anymore (and CONFIG_ appears by itself elsewhere, so that check is worthwhile). (2) comes from the include guard, __LINUX_KCONFIG_H. But with the previous patch, we no longer match that either. That leaves (3), which amounts to one [1] false dependency (aka stat() call done by make), which I think we can live with: We've already had one case [2] where the lack of include/linux/kconfig.h in the .o.cmd file caused a missing rebuild, and while I originally thought we should just put kconfig.h in the dependency list without parsing it for the CONFIG_ pattern, we actually do have some real CONFIG_ symbols mentioned in it, and one can imagine some translation unit that just does '#ifdef __BIG_ENDIAN' but doesn't through some other header actually depend on CONFIG_CPU_BIG_ENDIAN - so changing the target endianness could end up rebuilding the world, minus that small TU. Quoting Linus, ... when missing dependencies cause a missed re-compile, the resulting bugs can be _really_ subtle. [1] well, two, we now also have CONFIG_BOOGER/booger.h - we could change that to FOO if we care [2] https://lkml.org/lkml/2018/2/22/838 Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-05fixdep: remove some false CONFIG_ matchesRasmus Villemoes1-0/+5
The string CONFIG_ quite often appears after other alphanumerics, meaning that that instance cannot be referencing a Kconfig symbol. Omitting these means make has fewer files to stat() when deciding what needs to be rebuilt - for a defconfig build, this seems to remove about 2% of the (wildcard ...) lines from the .o.cmd files. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-05fixdep: remove stale references to uml-config.hRasmus Villemoes1-9/+0
uml-config.h hasn't existed in this decade (87e299e5c750 - x86, um: get rid of uml-config.h). The few remaining UML_CONFIG instances are defined directly in terms of their real CONFIG symbol in common-offsets.h, so unlike when the symbols got defined via a sed script, anything that uses UML_CONFIG_FOO now should also automatically pick up a dependency on CONFIG_FOO via the normal fixdep mechanism (since common-offsets.h should at least recursively be a dependency). Hence I believe we should actually be able to ignore the HELLO_CONFIG_BOOM cases. Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Richard Weinberger <richard@nod.at> Cc: user-mode-linux-devel@lists.sourceforge.net Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-03Merge tag 'kbuild-fixes-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds12-18/+29
Pull Kbuild fixes from Masahiro Yamada: - suppress sparse warnings about unknown attributes - fix typos and stale comments - fix build error of arch/sh - fix wrong use of ld-option vs cc-ldoption - remove redundant GCC_PLUGINS_CFLAGS assignment - fix another memory leak of Kconfig - fix line number in error messages of Kconfig - do not write confusing CONFIG_DEFCONFIG_LIST out to .config - add xstrdup() to Kconfig to handle memory shortage errors - show also a Debian package name if ncurses is missing * tag 'kbuild-fixes-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: MAINTAINERS: take over Kconfig maintainership kconfig: fix line number in recursive inclusion error message Coccinelle: memdup: Fix typo in warning messages kconfig: Update ncurses package names for menuconfig kbuild/kallsyms: trivial typo fix kbuild: test --build-id linker flag by ld-option instead of cc-ldoption kbuild: drop superfluous GCC_PLUGINS_CFLAGS assignment kconfig: Don't leak choice names during parsing sh: fix build error for empty CONFIG_BUILTIN_DTB_SOURCE kconfig: set SYMBOL_AUTO to the symbol marked with defconfig_list kconfig: add xstrdup() helper kbuild: disable sparse warnings about unknown attributes Makefile: Fix lying comment re. silentoldconfig
2018-03-03kconfig: fix line number in recursive inclusion error messageMasahiro Yamada1-8/+4
When recursive inclusion is detected, the line number of the last 'included from:' is wrong. [Test Case] Kconfig: -------->8-------- source "Kconfig2" -------->8-------- Kconfig2: -------->8-------- source "Kconfig3" -------->8-------- Kconfig3: -------->8-------- source "Kconfig" -------->8-------- [Result] $ make allyesconfig scripts/kconfig/conf --allyesconfig Kconfig Kconfig:1: recursive inclusion detected. Inclusion path: current file : 'Kconfig' included from: 'Kconfig3:1' included from: 'Kconfig2:1' included from: 'Kconfig:3' scripts/kconfig/Makefile:89: recipe for target 'allyesconfig' failed make[1]: *** [allyesconfig] Error 1 Makefile:512: recipe for target 'allyesconfig' failed make: *** [allyesconfig] Error 2 where we expect current file : 'Kconfig' included from: 'Kconfig3:1' included from: 'Kconfig2:1' included from: 'Kconfig:1' The 'iter->lineno+1' in the second fpinrtf() should be 'iter->lineno-1'. I refactored the code to merge the two fprintf() calls. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-03Coccinelle: memdup: Fix typo in warning messagesDafna Hirschfeld1-2/+2
Replace 'kmemdep' with 'kmemdup' in warning messages. Signed-off-by: Dafna Hirschfeld <dafna3@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Acked-by: Nicolas Palix <nicolas.palix@imag.fr> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-02kconfig: Update ncurses package names for menuconfigArvind Prasanna1-1/+2
The package name is ncurses-devel for Redhat based distros and libncurses-dev for Debian based distros. Signed-off-by: Arvind Prasanna <arvindprasanna@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-02kbuild/kallsyms: trivial typo fixCao jin1-1/+1
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-02kbuild: drop superfluous GCC_PLUGINS_CFLAGS assignmentCao jin1-1/+1
GCC_PLUGINS_CFLAGS is already in the environment, so it is superfluous to add it in commandline of final build of init/. Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-02kconfig: Don't leak choice names during parsingMasahiro Yamada1-0/+1
The named choice is not used in the kernel tree, but if it were used, it would not be freed. The intention of the named choice can be seen in the log of commit 5a1aa8a1aff6 ("kconfig: add named choice group"). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-02kconfig: set SYMBOL_AUTO to the symbol marked with defconfig_listMasahiro Yamada1-0/+1
The 'defconfig_list' is a weird attribute. If the '.config' is missing, conf_read_simple() iterates over all visible defaults, then it uses the first one for which fopen() succeeds. config DEFCONFIG_LIST string depends on !UML option defconfig_list default "/lib/modules/$UNAME_RELEASE/.config" default "/etc/kernel-config" default "/boot/config-$UNAME_RELEASE" default "$ARCH_DEFCONFIG" default "arch/$ARCH/defconfig" However, like other symbols, the first visible default is always written out to the .config file. This might be different from what has been actually used. For example, on my machine, the third one "/boot/config-$UNAME_RELEASE" is opened, like follows: $ rm .config $ make oldconfig 2>/dev/null scripts/kconfig/conf --oldconfig Kconfig # # using defaults found in /boot/config-4.4.0-112-generic # * * Restart config... * * * IRQ subsystem * Expose irq internals in debugfs (GENERIC_IRQ_DEBUGFS) [N/y/?] (NEW) However, the resulted .config file contains the first one since it is visible: $ grep CONFIG_DEFCONFIG_LIST .config CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" In order to stop confusing people, prevent this CONFIG option from being written to the .config file. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-02kconfig: add xstrdup() helperMasahiro Yamada6-5/+17
We already have xmalloc(), xcalloc(), and xrealloc((). Add xstrdup() as well to save tedious error handling. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-02-21objtool, retpolines: Integrate objtool with retpoline support more closelyPeter Zijlstra1-0/+2
Disable retpoline validation in objtool if your compiler sucks, and otherwise select the validation stuff for CONFIG_RETPOLINE=y (most builds would already have it set due to ORC). Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21objtool: Add module specific retpoline rulesPeter Zijlstra1-0/+2
David allowed retpolines in .init.text, except for modules, which will trip up objtool retpoline validation, fix that. Requested-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21objtool: Add retpoline validationPeter Zijlstra1-0/+4
David requested a objtool validation pass for CONFIG_RETPOLINE=y enabled builds, where it validates no unannotated indirect jumps or calls are left. Add an additional .discard.retpoline_safe section to allow annotating the few indirect sites that are required and safe. Requested-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-09Merge tag 'kbuild-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds13-66/+120
Pull more Kbuild updates from Masahiro Yamada: "Makefile changes: - enable unused-variable warning that was wrongly disabled for clang Kconfig changes: - warn about blank 'help' and fix existing instances - fix 'choice' behavior to not write out invisible symbols - fix misc weirdness Coccinell changes: - fix false positive of free after managed memory alloc detection - improve performance of NULL dereference detection" * tag 'kbuild-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (21 commits) kconfig: remove const qualifier from sym_expand_string_value() kconfig: add xrealloc() helper kconfig: send error messages to stderr kconfig: echo stdin to stdout if either is redirected kconfig: remove check_stdin() kconfig: remove 'config*' pattern from .gitignnore kconfig: show '?' prompt even if no help text is available kconfig: do not write choice values when their dependency becomes n coccinelle: deref_null: avoid useless computation coccinelle: devm_free: reduce false positives kbuild: clang: disable unused variable warnings only when constant kconfig: Warn if help text is blank nios2: kconfig: Remove blank help text arm: vt8500: kconfig: Remove blank help text MIPS: kconfig: Remove blank help text MIPS: BCM63XX: kconfig: Remove blank help text lib/Kconfig.debug: Remove blank help text Staging: rtl8192e: kconfig: Remove blank help text Staging: rtl8192u: kconfig: Remove blank help text mmc: kconfig: Remove blank help text ...
2018-02-10kconfig: remove const qualifier from sym_expand_string_value()Masahiro Yamada3-4/+4
This function returns realloc'ed memory, so the returned pointer must be passed to free() when done. So, 'const' qualifier is odd. It is allowed to modify the expanded string. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-02-10kconfig: add xrealloc() helperMasahiro Yamada6-5/+16
We already have xmalloc(), xcalloc(). Add xrealloc() as well to save tedious error handling. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-02-08Merge tag 'gcc-plugins-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds4-78/+37
Pull gcc plugins updates from Kees Cook: - update includes for gcc 8 (Valdis Kletnieks) - update initializers for gcc 8 * tag 'gcc-plugins-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-plugins: Use dynamic initializers gcc-plugins: Add include required by GCC release 8
2018-02-09kconfig: send error messages to stderrMasahiro Yamada4-19/+24
These messages should be directed to stderr. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-02-09kconfig: echo stdin to stdout if either is redirectedMasahiro Yamada1-3/+4
If stdio is not tty, conf_askvalue() puts additional new line to prevent prompts from being concatenated into a single line. This care is missing in conf_choice(), so a 'choice' prompt and the next prompt are shown in the same line. Move the code into xfgets() to cater to all cases. To improve this more, let's echo stdin to stdout. This clarifies what keys were input from stdio and the stdout looks like as if it were from tty. I removed the isatty(2) check since stderr is unrelated here. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.