path: root/security/keys/keyctl.c (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2019-07-10Revert "Merge tag 'keys-acl-20190703' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs"Linus Torvalds1-72/+32
This reverts merge 0f75ef6a9cff49ff612f7ce0578bced9d0b38325 (and thus effectively commits 7a1ade847596 ("keys: Provide KEYCTL_GRANT_PERMISSION") 2e12256b9a76 ("keys: Replace uid/gid/perm permissions checking with an ACL") that the merge brought in). It turns out that it breaks booting with an encrypted volume, and Eric biggers reports that it also breaks the fscrypt tests [1] and loading of in-kernel X.509 certificates [2]. The root cause of all the breakage is likely the same, but David Howells is off email so rather than try to work it out it's getting reverted in order to not impact the rest of the merge window. [1] https://lore.kernel.org/lkml/20190710011559.GA7973@sol.localdomain/ [2] https://lore.kernel.org/lkml/20190710013225.GB7973@sol.localdomain/ Link: https://lore.kernel.org/lkml/CAHk-=wjxoeMJfeBahnWH=9zShKp2bsVy527vo3_y8HfOdhwAAw@mail.gmail.com/ Reported-by: Eric Biggers <ebiggers@kernel.org> Cc: David Howells <dhowells@redhat.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-03keys: Provide KEYCTL_GRANT_PERMISSIONDavid Howells1-1/+7
Provide a keyctl() operation to grant/remove permissions. The grant operation, wrapped by libkeyutils, looks like: int ret = keyctl_grant_permission(key_serial_t key, enum key_ace_subject_type type, unsigned int subject, unsigned int perm); Where key is the key to be modified, type and subject represent the subject to which permission is to be granted (or removed) and perm is the set of permissions to be granted. 0 is returned on success. SET_SECURITY permission is required for this. The subject type currently must be KEY_ACE_SUBJ_STANDARD for the moment (other subject types will come along later). For subject type KEY_ACE_SUBJ_STANDARD, the following subject values are available: KEY_ACE_POSSESSOR The possessor of the key KEY_ACE_OWNER The owner of the key KEY_ACE_GROUP The key's group KEY_ACE_EVERYONE Everyone perm lists the permissions to be granted: KEY_ACE_VIEW Can view the key metadata KEY_ACE_READ Can read the key content KEY_ACE_WRITE Can update/modify the key content KEY_ACE_SEARCH Can find the key by searching/requesting KEY_ACE_LINK Can make a link to the key KEY_ACE_SET_SECURITY Can set security KEY_ACE_INVAL Can invalidate KEY_ACE_REVOKE Can revoke KEY_ACE_JOIN Can join this keyring KEY_ACE_CLEAR Can clear this keyring If an ACE already exists for the subject, then the permissions mask will be overwritten; if perm is 0, it will be deleted. Currently, the internal ACL is limited to a maximum of 16 entries. For example: int ret = keyctl_grant_permission(key, KEY_ACE_SUBJ_STANDARD, KEY_ACE_OWNER, KEY_ACE_VIEW | KEY_ACE_READ); Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-27keys: Replace uid/gid/perm permissions checking with an ACLDavid Howells1-31/+65
Replace the uid/gid/perm permissions checking on a key with an ACL to allow the SETATTR and SEARCH permissions to be split. This will also allow a greater range of subjects to represented. ============ WHY DO THIS? ============ The problem is that SETATTR and SEARCH cover a slew of actions, not all of which should be grouped together. For SETATTR, this includes actions that are about controlling access to a key: (1) Changing a key's ownership. (2) Changing a key's security information. (3) Setting a keyring's restriction. And actions that are about managing a key's lifetime: (4) Setting an expiry time. (5) Revoking a key. and (proposed) managing a key as part of a cache: (6) Invalidating a key. Managing a key's lifetime doesn't really have anything to do with controlling access to that key. Expiry time is awkward since it's more about the lifetime of the content and so, in some ways goes better with WRITE permission. It can, however, be set unconditionally by a process with an appropriate authorisation token for instantiating a key, and can also be set by the key type driver when a key is instantiated, so lumping it with the access-controlling actions is probably okay. As for SEARCH permission, that currently covers: (1) Finding keys in a keyring tree during a search. (2) Permitting keyrings to be joined. (3) Invalidation. But these don't really belong together either, since these actions really need to be controlled separately. Finally, there are number of special cases to do with granting the administrator special rights to invalidate or clear keys that I would like to handle with the ACL rather than key flags and special checks. =============== WHAT IS CHANGED =============== The SETATTR permission is split to create two new permissions: (1) SET_SECURITY - which allows the key's owner, group and ACL to be changed and a restriction to be placed on a keyring. (2) REVOKE - which allows a key to be revoked. The SEARCH permission is split to create: (1) SEARCH - which allows a keyring to be search and a key to be found. (2) JOIN - which allows a keyring to be joined as a session keyring. (3) INVAL - which allows a key to be invalidated. The WRITE permission is also split to create: (1) WRITE - which allows a key's content to be altered and links to be added, removed and replaced in a keyring. (2) CLEAR - which allows a keyring to be cleared completely. This is split out to make it possible to give just this to an administrator. (3) REVOKE - see above. Keys acquire ACLs which consist of a series of ACEs, and all that apply are unioned together. An ACE specifies a subject, such as: (*) Possessor - permitted to anyone who 'possesses' a key (*) Owner - permitted to the key owner (*) Group - permitted to the key group (*) Everyone - permitted to everyone Note that 'Other' has been replaced with 'Everyone' on the assumption that you wouldn't grant a permit to 'Other' that you wouldn't also grant to everyone else. Further subjects may be made available by later patches. The ACE also specifies a permissions mask. The set of permissions is now: VIEW Can view the key metadata READ Can read the key content WRITE Can update/modify the key content SEARCH Can find the key by searching/requesting LINK Can make a link to the key SET_SECURITY Can change owner, ACL, expiry INVAL Can invalidate REVOKE Can revoke JOIN Can join this keyring CLEAR Can clear this keyring The KEYCTL_SETPERM function is then deprecated. The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set, or if the caller has a valid instantiation auth token. The KEYCTL_INVALIDATE function then requires INVAL. The KEYCTL_REVOKE function then requires REVOKE. The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an existing keyring. The JOIN permission is enabled by default for session keyrings and manually created keyrings only. ====================== BACKWARD COMPATIBILITY ====================== To maintain backward compatibility, KEYCTL_SETPERM will translate the permissions mask it is given into a new ACL for a key - unless KEYCTL_SET_ACL has been called on that key, in which case an error will be returned. It will convert possessor, owner, group and other permissions into separate ACEs, if each portion of the mask is non-zero. SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned on if a keyring is being altered. The KEYCTL_DESCRIBE function translates the ACL back into a permissions mask to return depending on possessor, owner, group and everyone ACEs. It will make the following mappings: (1) INVAL, JOIN -> SEARCH (2) SET_SECURITY -> SETATTR (3) REVOKE -> WRITE if SETATTR isn't already set (4) CLEAR -> WRITE Note that the value subsequently returned by KEYCTL_DESCRIBE may not match the value set with KEYCTL_SETATTR. ======= TESTING ======= This passes the keyutils testsuite for all but a couple of tests: (1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed if the type doesn't have ->read(). You still can't actually read the key. (2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't work as Other has been replaced with Everyone in the ACL. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-27keys: Pass the network namespace into request_key mechanismDavid Howells1-1/+1
Create a request_key_net() function and use it to pass the network namespace domain tag into DNS revolver keys and rxrpc/AFS keys so that keys for different domains can coexist in the same keyring. Signed-off-by: David Howells <dhowells@redhat.com> cc: netdev@vger.kernel.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: linux-afs@lists.infradead.org
2019-06-26keys: Include target namespace in match criteriaDavid Howells1-1/+2
Currently a key has a standard matching criteria of { type, description } and this is used to only allow keys with unique criteria in a keyring. This means, however, that you cannot have keys with the same type and description but a different target namespace in the same keyring. This is a potential problem for a containerised environment where, say, a container is made up of some parts of its mount space involving netfs superblocks from two different network namespaces. This is also a problem for shared system management keyrings such as the DNS records keyring or the NFS idmapper keyring that might contain keys from different network namespaces. Fix this by including a namespace component in a key's matching criteria. Keyring types are marked to indicate which, if any, namespace is relevant to keys of that type, and that namespace is set when the key is created from the current task's namespace set. The capability bit KEYCTL_CAPS1_NS_KEY_TAG is set if the kernel is employing this feature. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-26keys: Namespace keyring namesDavid Howells1-1/+2
Keyring names are held in a single global list that any process can pick from by means of keyctl_join_session_keyring (provided the keyring grants Search permission). This isn't very container friendly, however. Make the following changes: (1) Make default session, process and thread keyring names begin with a '.' instead of '_'. (2) Keyrings whose names begin with a '.' aren't added to the list. Such keyrings are system specials. (3) Replace the global list with per-user_namespace lists. A keyring adds its name to the list for the user_namespace that it is currently in. (4) When a user_namespace is deleted, it just removes itself from the keyring name list. The global keyring_name_lock is retained for accessing the name lists. This allows (4) to work. This can be tested by: # keyctl newring foo @s 995906392 # unshare -U $ keyctl show ... 995906392 --alswrv 65534 65534 \_ keyring: foo ... $ keyctl session foo Joined session keyring: 935622349 As can be seen, a new session keyring was created. The capability bit KEYCTL_CAPS1_NS_KEYRING_NAME is set if the kernel is employing this feature. Signed-off-by: David Howells <dhowells@redhat.com> cc: Eric W. Biederman <ebiederm@xmission.com>
2019-06-26keys: Add a 'recurse' flag for keyring searchesDavid Howells1-1/+1
Add a 'recurse' flag for keyring searches so that the flag can be omitted and recursion disabled, thereby allowing just the nominated keyring to be searched and none of the children. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-19keys: Add capability-checking keyctl functionDavid Howells1-0/+35
Add a keyctl function that requests a set of capability bits to find out what features are supported. Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-30keys: Add a keyctl to move a key between keyringsDavid Howells1-0/+52
Add a keyctl to atomically move a link to a key from one keyring to another. The key must exist in "from" keyring and a flag can be given to cause the operation to fail if there's a matching key already in the "to" keyring. This can be done with: keyctl(KEYCTL_MOVE, key_serial_t key, key_serial_t from_keyring, key_serial_t to_keyring, unsigned int flags); The key being moved must grant Link permission and both keyrings must grant Write permission. flags should be 0 or KEYCTL_MOVE_EXCL, with the latter preventing displacement of a matching key from the "to" keyring. Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner1-5/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-29keys: sparse: Fix incorrect RCU accessesDavid Howells1-1/+2
Fix a pair of accesses that should be using RCU protection. rcu_dereference_protected() is needed to access task_struct::real_parent. current_cred() should be used to access current->cred. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jamorris@linux.microsoft.com>
2019-03-04keys: fix missing __user in KEYCTL_PKEY_QUERYBen Dooks1-1/+1
The arg5 of KEYCTL_PKEY_QUERY should have a __user pointer tag on it as it is a user pointer. This clears the following sparse warning for this: security/keys/keyctl.c:1755:43: warning: incorrect type in argument 3 (different address spaces) security/keys/keyctl.c:1755:43: expected struct keyctl_pkey_query [noderef] <asn:1>*<noident> security/keys/keyctl.c:1755:43: got struct keyctl_pkey_query *<noident> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Acked-by: Serge Hallyn <serge@hallyn.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2019-02-15keys: Fix dependency loop between construction record and auth keyDavid Howells1-0/+1
In the request_key() upcall mechanism there's a dependency loop by which if a key type driver overrides the ->request_key hook and the userspace side manages to lose the authorisation key, the auth key and the internal construction record (struct key_construction) can keep each other pinned. Fix this by the following changes: (1) Killing off the construction record and using the auth key instead. (2) Including the operation name in the auth key payload and making the payload available outside of security/keys/. (3) The ->request_key hook is given the authkey instead of the cons record and operation name. Changes (2) and (3) allow the auth key to naturally be cleaned up if the keyring it is in is destroyed or cleared or the auth key is unlinked. Fixes: 7ee02a316600 ("keys: Fix dependency loop between construction record and auth key") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2018-12-12security: audit and remove any unnecessary uses of module.hPaul Gortmaker1-1/+0
Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. The advantage in removing such instances is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h might have been the implicit source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each instance for the presence of either and replace as needed. Cc: James Morris <jmorris@namei.org> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: John Johansen <john.johansen@canonical.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: linux-security-module@vger.kernel.org Cc: linux-integrity@vger.kernel.org Cc: keyrings@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2018-10-26KEYS: Provide keyctls to drive the new key type ops for asymmetric keys [ver #2]David Howells1-0/+24
Provide five keyctl functions that permit userspace to make use of the new key type ops for accessing and driving asymmetric keys. (*) Query an asymmetric key. long keyctl(KEYCTL_PKEY_QUERY, key_serial_t key, unsigned long reserved, struct keyctl_pkey_query *info); Get information about an asymmetric key. The information is returned in the keyctl_pkey_query struct: __u32 supported_ops; A bit mask of flags indicating which ops are supported. This is constructed from a bitwise-OR of: KEYCTL_SUPPORTS_{ENCRYPT,DECRYPT,SIGN,VERIFY} __u32 key_size; The size in bits of the key. __u16 max_data_size; __u16 max_sig_size; __u16 max_enc_size; __u16 max_dec_size; The maximum sizes in bytes of a blob of data to be signed, a signature blob, a blob to be encrypted and a blob to be decrypted. reserved must be set to 0. This is intended for future use to hand over one or more passphrases needed unlock a key. If successful, 0 is returned. If the key is not an asymmetric key, EOPNOTSUPP is returned. (*) Encrypt, decrypt, sign or verify a blob using an asymmetric key. long keyctl(KEYCTL_PKEY_ENCRYPT, const struct keyctl_pkey_params *params, const char *info, const void *in, void *out); long keyctl(KEYCTL_PKEY_DECRYPT, const struct keyctl_pkey_params *params, const char *info, const void *in, void *out); long keyctl(KEYCTL_PKEY_SIGN, const struct keyctl_pkey_params *params, const char *info, const void *in, void *out); long keyctl(KEYCTL_PKEY_VERIFY, const struct keyctl_pkey_params *params, const char *info, const void *in, const void *in2); Use an asymmetric key to perform a public-key cryptographic operation a blob of data. The parameter block pointed to by params contains a number of integer values: __s32 key_id; __u32 in_len; __u32 out_len; __u32 in2_len; For a given operation, the in and out buffers are used as follows: Operation ID in,in_len out,out_len in2,in2_len ======================= =============== =============== =========== KEYCTL_PKEY_ENCRYPT Raw data Encrypted data - KEYCTL_PKEY_DECRYPT Encrypted data Raw data - KEYCTL_PKEY_SIGN Raw data Signature - KEYCTL_PKEY_VERIFY Raw data - Signature info is a string of key=value pairs that supply supplementary information. The __spare space in the parameter block must be set to 0. This is intended, amongst other things, to allow the passing of passphrases required to unlock a key. If successful, encrypt, decrypt and sign all return the amount of data written into the output buffer. Verification returns 0 on success. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: Denis Kenzior <denkenz@gmail.com> Tested-by: Denis Kenzior <denkenz@gmail.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2017-12-08KEYS: reject NULL restriction string when type is specifiedEric Biggers1-14/+10
keyctl_restrict_keyring() allows through a NULL restriction when the "type" is non-NULL, which causes a NULL pointer dereference in asymmetric_lookup_restriction() when it calls strcmp() on the restriction string. But no key types actually use a "NULL restriction" to mean anything, so update keyctl_restrict_keyring() to reject it with EINVAL. Reported-by: syzbot <syzkaller@googlegroups.com> Fixes: 97d3aa0f3134 ("KEYS: Add a lookup_restriction function for the asymmetric key type") Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com>
2017-10-18KEYS: Fix race between updating and finding a negative keyDavid Howells1-5/+4
Consolidate KEY_FLAG_INSTANTIATED, KEY_FLAG_NEGATIVE and the rejection error into one field such that: (1) The instantiation state can be modified/read atomically. (2) The error can be accessed atomically with the state. (3) The error isn't stored unioned with the payload pointers. This deals with the problem that the state is spread over three different objects (two bits and a separate variable) and reading or updating them atomically isn't practical, given that not only can uninstantiated keys change into instantiated or rejected keys, but rejected keys can also turn into instantiated keys - and someone accessing the key might not be using any locking. The main side effect of this problem is that what was held in the payload may change, depending on the state. For instance, you might observe the key to be in the rejected state. You then read the cached error, but if the key semaphore wasn't locked, the key might've become instantiated between the two reads - and you might now have something in hand that isn't actually an error code. The state is now KEY_IS_UNINSTANTIATED, KEY_IS_POSITIVE or a negative error code if the key is negatively instantiated. The key_is_instantiated() function is replaced with key_is_positive() to avoid confusion as negative keys are also 'instantiated'. Additionally, barriering is included: (1) Order payload-set before state-set during instantiation. (2) Order state-read before payload-read when using the key. Further separate barriering is necessary if RCU is being used to access the payload content after reading the payload pointers. Fixes: 146aa8b1453b ("KEYS: Merge the type-specific data with the payload data") Cc: stable@vger.kernel.org # v4.4+ Reported-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Eric Biggers <ebiggers@google.com>
2017-09-25KEYS: prevent KEYCTL_READ on negative keyEric Biggers1-0/+5
Because keyctl_read_key() looks up the key with no permissions requested, it may find a negatively instantiated key. If the key is also possessed, we went ahead and called ->read() on the key. But the key payload will actually contain the ->reject_error rather than the normal payload. Thus, the kernel oopses trying to read the user_key_payload from memory address (int)-ENOKEY = 0x00000000ffffff82. Fortunately the payload data is stored inline, so it shouldn't be possible to abuse this as an arbitrary memory read primitive... Reproducer: keyctl new_session keyctl request2 user desc '' @s keyctl read $(keyctl show | awk '/user: desc/ {print $1}') It causes a crash like the following: BUG: unable to handle kernel paging request at 00000000ffffff92 IP: user_read+0x33/0xa0 PGD 36a54067 P4D 36a54067 PUD 0 Oops: 0000 [#1] SMP CPU: 0 PID: 211 Comm: keyctl Not tainted 4.14.0-rc1 #337 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-20170228_101828-anatol 04/01/2014 task: ffff90aa3b74c3c0 task.stack: ffff9878c0478000 RIP: 0010:user_read+0x33/0xa0 RSP: 0018:ffff9878c047bee8 EFLAGS: 00010246 RAX: 0000000000000001 RBX: ffff90aa3d7da340 RCX: 0000000000000017 RDX: 0000000000000000 RSI: 00000000ffffff82 RDI: ffff90aa3d7da340 RBP: ffff9878c047bf00 R08: 00000024f95da94f R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f58ece69740(0000) GS:ffff90aa3e200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000ffffff92 CR3: 0000000036adc001 CR4: 00000000003606f0 Call Trace: keyctl_read_key+0xac/0xe0 SyS_keyctl+0x99/0x120 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x7f58ec787bb9 RSP: 002b:00007ffc8d401678 EFLAGS: 00000206 ORIG_RAX: 00000000000000fa RAX: ffffffffffffffda RBX: 00007ffc8d402800 RCX: 00007f58ec787bb9 RDX: 0000000000000000 RSI: 00000000174a63ac RDI: 000000000000000b RBP: 0000000000000004 R08: 00007ffc8d402809 R09: 0000000000000020 R10: 0000000000000000 R11: 0000000000000206 R12: 00007ffc8d402800 R13: 00007ffc8d4016e0 R14: 0000000000000000 R15: 0000000000000000 Code: e5 41 55 49 89 f5 41 54 49 89 d4 53 48 89 fb e8 a4 b4 ad ff 85 c0 74 09 80 3d b9 4c 96 00 00 74 43 48 8b b3 20 01 00 00 4d 85 ed <0f> b7 5e 10 74 29 4d 85 e4 74 24 4c 39 e3 4c 89 e2 4c 89 ef 48 RIP: user_read+0x33/0xa0 RSP: ffff9878c047bee8 CR2: 00000000ffffff92 Fixes: 61ea0c0ba904 ("KEYS: Skip key state checks when checking for possession") Cc: <stable@vger.kernel.org> [v3.13+] Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com>
2017-09-25KEYS: fix key refcount leak in keyctl_read_key()Eric Biggers1-1/+1
In keyctl_read_key(), if key_permission() were to return an error code other than EACCES, we would leak a the reference to the key. This can't actually happen currently because key_permission() can only return an error code other than EACCES if security_key_permission() does, only SELinux and Smack implement that hook, and neither can return an error code other than EACCES. But it should still be fixed, as it is a bug waiting to happen. Fixes: 29db91906340 ("[PATCH] Keys: Add LSM hooks for key management [try #3]") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com>
2017-09-25KEYS: fix key refcount leak in keyctl_assume_authority()Eric Biggers1-4/+2
In keyctl_assume_authority(), if keyctl_change_reqkey_auth() were to fail, we would leak the reference to the 'authkey'. Currently this can only happen if prepare_creds() fails to allocate memory. But it still should be fixed, as it is a more severe bug waiting to happen. This patch also moves the read of 'authkey->serial' to before the reference to the authkey is dropped. Doing the read after dropping the reference is very fragile because it assumes we still hold another reference to the key. (Which we do, in current->cred->request_key_auth, but there's no reason not to write it in the "obviously correct" way.) Fixes: d84f4f992cbd ("CRED: Inaugurate COW credentials") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com>
2017-06-09KEYS: sanitize add_key() and keyctl() key payloadsEric Biggers1-3/+9
Before returning from add_key() or one of the keyctl() commands that takes in a key payload, zero the temporary buffer that was allocated to hold the key payload copied from userspace. This may contain sensitive key material that should not be kept around in the slab caches. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-06-09KEYS: fix dereferencing NULL payload with nonzero lengthEric Biggers1-2/+2
sys_add_key() and the KEYCTL_UPDATE operation of sys_keyctl() allowed a NULL payload with nonzero length to be passed to the key type's ->preparse(), ->instantiate(), and/or ->update() methods. Various key types including asymmetric, cifs.idmap, cifs.spnego, and pkcs7_test did not handle this case, allowing an unprivileged user to trivially cause a NULL pointer dereference (kernel oops) if one of these key types was present. Fix it by doing the copy_from_user() when 'plen' is nonzero rather than when '_payload' is non-NULL, causing the syscall to fail with EFAULT as expected when an invalid buffer is specified. Cc: stable@vger.kernel.org # 2.6.10+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-05-08treewide: use kv[mz]alloc* rather than opencoded variantsMichal Hocko1-16/+6
There are many code paths opencoding kvmalloc. Let's use the helper instead. The main difference to kvmalloc is that those users are usually not considering all the aspects of the memory allocator. E.g. allocation requests <= 32kB (with 4kB pages) are basically never failing and invoke OOM killer to satisfy the allocation. This sounds too disruptive for something that has a reasonable fallback - the vmalloc. On the other hand those requests might fallback to vmalloc even when the memory allocator would succeed after several more reclaim/compaction attempts previously. There is no guarantee something like that happens though. This patch converts many of those places to kv[mz]alloc* helpers because they are more conservative. Link: http://lkml.kernel.org/r/20170306103327.2766-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> # Xen bits Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Andreas Dilger <andreas.dilger@intel.com> # Lustre Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> # KVM/s390 Acked-by: Dan Williams <dan.j.williams@intel.com> # nvdim Acked-by: David Sterba <dsterba@suse.com> # btrfs Acked-by: Ilya Dryomov <idryomov@gmail.com> # Ceph Acked-by: Tariq Toukan <tariqt@mellanox.com> # mlx4 Acked-by: Leon Romanovsky <leonro@mellanox.com> # mlx5 Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Tony Luck <tony.luck@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Santosh Raspatur <santosh@chelsio.com> Cc: Hariprasad S <hariprasad@chelsio.com> Cc: Yishai Hadas <yishaih@mellanox.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: "Yan, Zheng" <zyan@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-04-18KEYS: fix keyctl_set_reqkey_keyring() to not leak thread keyringsEric Biggers1-7/+4
This fixes CVE-2017-7472. Running the following program as an unprivileged user exhausts kernel memory by leaking thread keyrings: #include <keyutils.h> int main() { for (;;) keyctl_set_reqkey_keyring(KEY_REQKEY_DEFL_THREAD_KEYRING); } Fix it by only creating a new thread keyring if there wasn't one before. To make things more consistent, make install_thread_keyring_to_cred() and install_process_keyring_to_cred() both return 0 if the corresponding keyring is already present. Fixes: d84f4f992cbd ("CRED: Inaugurate COW credentials") Cc: stable@vger.kernel.org # 2.6.29+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com>
2017-04-18KEYS: Disallow keyrings beginning with '.' to be joined as session keyringsDavid Howells1-2/+7
This fixes CVE-2016-9604. Keyrings whose name begin with a '.' are special internal keyrings and so userspace isn't allowed to create keyrings by this name to prevent shadowing. However, the patch that added the guard didn't fix KEYCTL_JOIN_SESSION_KEYRING. Not only can that create dot-named keyrings, it can also subscribe to them as a session keyring if they grant SEARCH permission to the user. This, for example, allows a root process to set .builtin_trusted_keys as its session keyring, at which point it has full access because now the possessor permissions are added. This permits root to add extra public keys, thereby bypassing module verification. This also affects kexec and IMA. This can be tested by (as root): keyctl session .builtin_trusted_keys keyctl add user a a @s keyctl list @s which on my test box gives me: 2 keys in keyring: 180010936: ---lswrv 0 0 asymmetric: Build time autogenerated kernel key: ae3d4a31b82daa8e1a75b49dc2bba949fd992a05 801382539: --alswrv 0 0 user: a Fix this by rejecting names beginning with a '.' in the keyctl. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com> cc: linux-ima-devel@lists.sourceforge.net cc: stable@vger.kernel.org
2017-04-04KEYS: add SP800-56A KDF support for DHStephan Mueller1-1/+1
SP800-56A defines the use of DH with key derivation function based on a counter. The input to the KDF is defined as (DH shared secret || other information). The value for the "other information" is to be provided by the caller. The KDF is implemented using the hash support from the kernel crypto API. The implementation uses the symmetric hash support as the input to the hash operation is usually very small. The caller is allowed to specify the hash name that he wants to use to derive the key material allowing the use of all supported hashes provided with the kernel crypto API. As the KDF implements the proper truncation of the DH shared secret to the requested size, this patch fills the caller buffer up to its size. The patch is tested with a new test added to the keyutils user space code which uses a CAVS test vector testing the compliance with SP800-56A. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: David Howells <dhowells@redhat.com>
2017-04-04KEYS: Add KEYCTL_RESTRICT_KEYRINGMat Martineau1-0/+58
Keyrings recently gained restrict_link capabilities that allow individual keys to be validated prior to linking. This functionality was only available using internal kernel APIs. With the KEYCTL_RESTRICT_KEYRING command existing keyrings can be configured to check the content of keys before they are linked, and then allow or disallow linkage of that key to the keyring. To restrict a keyring, call: keyctl(KEYCTL_RESTRICT_KEYRING, key_serial_t keyring, const char *type, const char *restriction) where 'type' is the name of a registered key type and 'restriction' is a string describing how key linkage is to be restricted. The restriction option syntax is specific to each key type. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to <linux/sched/task.h>Ingo Molnar1-0/+1
We are going to split <linux/sched/task.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare to remove <linux/cred.h> inclusion from <linux/sched.h>Ingo Molnar1-0/+1
Add #include <linux/cred.h> dependencies to all .c files rely on sched.h doing that for them. Note that even if the count where we need to add extra headers seems high, it's still a net win, because <linux/sched.h> is included in over 2,200 files ... Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds1-1/+1
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-05[iov_iter] new primitives - copy_from_iter_full() and friendsAl Viro1-1/+1
copy_from_iter_full(), copy_from_iter_full_nocache() and csum_and_copy_from_iter_full() - counterparts of copy_from_iter() et.al., advancing iterator only in case of successful full copy and returning whether it had been successful or not. Convert some obvious users. *NOTE* - do not blindly assume that something is a good candidate for those unless you are sure that not advancing iov_iter in failure case is the right thing in this case. Anything that does short read/short write kind of stuff (or is in a loop, etc.) is unlikely to be a good one. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-06-03KEYS: Add placeholder for KDF usage with DHStephan Mueller1-2/+2
The values computed during Diffie-Hellman key exchange are often used in combination with key derivation functions to create cryptographic keys. Add a placeholder for a later implementation to configure a key derivation function that will transform the Diffie-Hellman result returned by the KEYCTL_DH_COMPUTE command. [This patch was stripped down from a patch produced by Mat Martineau that had a bug in the compat code - so for the moment Stephan's patch simply requires that the placeholder argument must be NULL] Original-signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2016-04-12KEYS: Add KEYCTL_DH_COMPUTE commandMat Martineau1-0/+5
This adds userspace access to Diffie-Hellman computations through a new keyctl() syscall command to calculate shared secrets or public keys using input parameters stored in the keyring. Input key ids are provided in a struct due to the current 5-arg limit for the keyctl syscall. Only user keys are supported in order to avoid exposing the content of logon or encrypted keys. The output is written to the provided buffer, based on the assumption that the values are only needed in userspace. Future support for other types of key derivation would involve a new command, like KEYCTL_ECDH_COMPUTE. Once Diffie-Hellman support is included in the crypto API, this code can be converted to use the crypto API to take advantage of possible hardware acceleration and reduce redundant code. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David Howells <dhowells@redhat.com>
2016-01-07KEYS: refcount bug fixMimi Zohar1-10/+7
This patch fixes the key_ref leak, removes the unnecessary KEY_FLAG_KEEP test before setting the flag, and cleans up the if/then brackets style introduced in commit: d3600bc KEYS: prevent keys from being removed from specified keyrings Reported-by: David Howells <dhowells@redhat.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: David Howells <dhowells@redhat.com>
2015-12-19KEYS: Fix race between read and revokeDavid Howells1-9/+9
This fixes CVE-2015-7550. There's a race between keyctl_read() and keyctl_revoke(). If the revoke happens between keyctl_read() checking the validity of a key and the key's semaphore being taken, then the key type read method will see a revoked key. This causes a problem for the user-defined key type because it assumes in its read method that there will always be a payload in a non-revoked key and doesn't check for a NULL pointer. Fix this by making keyctl_read() check the validity of a key after taking semaphore instead of before. I think the bug was introduced with the original keyrings code. This was discovered by a multithreaded test program generated by syzkaller (http://github.com/google/syzkaller). Here's a cleaned up version: #include <sys/types.h> #include <keyutils.h> #include <pthread.h> void *thr0(void *arg) { key_serial_t key = (unsigned long)arg; keyctl_revoke(key); return 0; } void *thr1(void *arg) { key_serial_t key = (unsigned long)arg; char buffer[16]; keyctl_read(key, buffer, 16); return 0; } int main() { key_serial_t key = add_key("user", "%", "foo", 3, KEY_SPEC_USER_KEYRING); pthread_t th[5]; pthread_create(&th[0], 0, thr0, (void *)(unsigned long)key); pthread_create(&th[1], 0, thr1, (void *)(unsigned long)key); pthread_create(&th[2], 0, thr0, (void *)(unsigned long)key); pthread_create(&th[3], 0, thr1, (void *)(unsigned long)key); pthread_join(th[0], 0); pthread_join(th[1], 0); pthread_join(th[2], 0); pthread_join(th[3], 0); return 0; } Build as: cc -o keyctl-race keyctl-race.c -lkeyutils -lpthread Run as: while keyctl-race; do :; done as it may need several iterations to crash the kernel. The crash can be summarised as: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: [<ffffffff81279b08>] user_read+0x56/0xa3 ... Call Trace: [<ffffffff81276aa9>] keyctl_read_key+0xb6/0xd7 [<ffffffff81277815>] SyS_keyctl+0x83/0xe0 [<ffffffff815dbb97>] entry_SYSCALL_64_fastpath+0x12/0x6f Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Cc: stable@vger.kernel.org Signed-off-by: James Morris <james.l.morris@oracle.com>
2015-12-15KEYS: prevent keys from being removed from specified keyringsMimi Zohar1-10/+46
Userspace should not be allowed to remove keys from certain keyrings (eg. blacklist), though the keys themselves can expire. This patch defines a new key flag named KEY_FLAG_KEEP to prevent userspace from being able to unlink, revoke, invalidate or timed out a key on a keyring. When this flag is set on the keyring, all keys subsequently added are flagged. In addition, when this flag is set, the keyring itself can not be cleared. Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: David Howells <dhowells@redhat.com>
2015-10-21KEYS: Merge the type-specific data with the payload dataDavid Howells1-2/+2
Merge the type-specific data with the payload data into one four-word chunk as it seems pointless to keep them separate. Use user_key_payload() for accessing the payloads of overloaded user-defined keys. Signed-off-by: David Howells <dhowells@redhat.com> cc: linux-cifs@vger.kernel.org cc: ecryptfs@vger.kernel.org cc: linux-ext4@vger.kernel.org cc: linux-f2fs-devel@lists.sourceforge.net cc: linux-nfs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: linux-ima-devel@lists.sourceforge.net
2015-10-21KEYS: use kvfree() in add_keyGeliang Tang1-7/+1
There is no need to make a flag to tell that this memory is allocated by kmalloc or vmalloc. Just use kvfree to free the memory. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: David Howells <dhowells@redhat.com>
2015-04-11switch keyctl_instantiate_key_common() to iov_iterAl Viro1-51/+27
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-01KEYS: Fix the size of the key description passed to/from userspaceDavid Howells1-30/+26
When a key description argument is imported into the kernel from userspace, as happens in add_key(), request_key(), KEYCTL_JOIN_SESSION_KEYRING, KEYCTL_SEARCH, the description is copied into a buffer up to PAGE_SIZE in size. PAGE_SIZE, however, is a variable quantity, depending on the arch. Fix this at 4096 instead (ie. 4095 plus a NUL termination) and define a constant (KEY_MAX_DESC_SIZE) to this end. When reading the description back with KEYCTL_DESCRIBE, a PAGE_SIZE internal buffer is allocated into which the information and description will be rendered. This means that the description will get truncated if an extremely long description it has to be crammed into the buffer with the stringified information. There is no particular need to copy the description into the buffer, so just copy it directly to userspace in a separate operation. Reported-by: Christian Kastner <debian@kvr.at> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Christian Kastner <debian@kvr.at>
2014-09-16KEYS: Reinstate EPERM for a key type name beginning with a '.'David Howells1-0/+2
Reinstate the generation of EPERM for a key type name beginning with a '.' in a userspace call. Types whose name begins with a '.' are internal only. The test was removed by: commit a4e3b8d79a5c6d40f4a9703abf7fe3abcc6c3b8d Author: Mimi Zohar <zohar@linux.vnet.ibm.com> Date: Thu May 22 14:02:23 2014 -0400 Subject: KEYS: special dot prefixed keyring name bug fix I think we want to keep the restriction on type name so that userspace can't add keys of a special internal type. Note that removal of the test causes several of the tests in the keyutils testsuite to fail. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-07-17KEYS: Allow special keys (eg. DNS results) to be invalidated by CAP_SYS_ADMINDavid Howells1-1/+14
Special kernel keys, such as those used to hold DNS results for AFS, CIFS and NFS and those used to hold idmapper results for NFS, used to be 'invalidateable' with key_revoke(). However, since the default permissions for keys were reduced: Commit: 96b5c8fea6c0861621051290d705ec2e971963f1 KEYS: Reduce initial permissions on keys it has become impossible to do this. Add a key flag (KEY_FLAG_ROOT_CAN_INVAL) that will permit a key to be invalidated by root. This should not be used for system keyrings as the garbage collector will try and remove any invalidate key. For system keyrings, KEY_FLAG_ROOT_CAN_CLEAR can be used instead. After this, from userspace, keyctl_invalidate() and "keyctl invalidate" can be used by any possessor of CAP_SYS_ADMIN (typically root) to invalidate DNS and idmapper keys. Invalidated keys are immediately garbage collected and will be immediately rerequested if needed again. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Steve Dickson <steved@redhat.com>
2014-07-17KEYS: special dot prefixed keyring name bug fixMimi Zohar1-2/+4
Dot prefixed keyring names are supposed to be reserved for the kernel, but add_key() calls key_get_type_from_user(), which incorrectly verifies the 'type' field, not the 'description' field. This patch verifies the 'description' field isn't dot prefixed, when creating a new keyring, and removes the dot prefix test in key_get_type_from_user(). Changelog v6: - whitespace and other cleanup Changelog v5: - Only prevent userspace from creating a dot prefixed keyring, not regular keys - Dmitry Reported-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: David Howells <dhowells@redhat.com>
2014-03-14KEYS: Move the flags representing required permission to linux/key.hDavid Howells1-22/+22
Move the flags representing required permission to linux/key.h as the perm parameter of security_key_permission() is in terms of them - and not the permissions mask flags used in key->perm. Whilst we're at it: (1) Rename them to be KEY_NEED_xxx rather than KEY_xxx to avoid collisions with symbols in uapi/linux/input.h. (2) Don't use key_perm_t for a mask of required permissions, but rather limit it to the permissions mask attached to the key and arguments related directly to that. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
2013-09-24KEYS: Add per-user_namespace registers for persistent per-UID kerberos cachesDavid Howells1-0/+3
Add support for per-user_namespace registers of persistent per-UID kerberos caches held within the kernel. This allows the kerberos cache to be retained beyond the life of all a user's processes so that the user's cron jobs can work. The kerberos cache is envisioned as a keyring/key tree looking something like: struct user_namespace \___ .krb_cache keyring - The register \___ _krb.0 keyring - Root's Kerberos cache \___ _krb.5000 keyring - User 5000's Kerberos cache \___ _krb.5001 keyring - User 5001's Kerberos cache \___ tkt785 big_key - A ccache blob \___ tkt12345 big_key - Another ccache blob Or possibly: struct user_namespace \___ .krb_cache keyring - The register \___ _krb.0 keyring - Root's Kerberos cache \___ _krb.5000 keyring - User 5000's Kerberos cache \___ _krb.5001 keyring - User 5001's Kerberos cache \___ tkt785 keyring - A ccache \___ krbtgt/REDHAT.COM@REDHAT.COM big_key \___ http/REDHAT.COM@REDHAT.COM user \___ afs/REDHAT.COM@REDHAT.COM user \___ nfs/REDHAT.COM@REDHAT.COM user \___ krbtgt/KERNEL.ORG@KERNEL.ORG big_key \___ http/KERNEL.ORG@KERNEL.ORG big_key What goes into a particular Kerberos cache is entirely up to userspace. Kernel support is limited to giving you the Kerberos cache keyring that you want. The user asks for their Kerberos cache by: krb_cache = keyctl_get_krbcache(uid, dest_keyring); The uid is -1 or the user's own UID for the user's own cache or the uid of some other user's cache (requires CAP_SETUID). This permits rpc.gssd or whatever to mess with the cache. The cache returned is a keyring named "_krb.<uid>" that the possessor can read, search, clear, invalidate, unlink from and add links to. Active LSMs get a chance to rule on whether the caller is permitted to make a link. Each uid's cache keyring is created when it first accessed and is given a timeout that is extended each time this function is called so that the keyring goes away after a while. The timeout is configurable by sysctl but defaults to three days. Each user_namespace struct gets a lazily-created keyring that serves as the register. The cache keyrings are added to it. This means that standard key search and garbage collection facilities are available. The user_namespace struct's register goes away when it does and anything left in it is then automatically gc'd. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Simo Sorce <simo@redhat.com> cc: Serge E. Hallyn <serge.hallyn@ubuntu.com> cc: Eric W. Biederman <ebiederm@xmission.com>
2013-05-07aio: don't include aio.h in sched.hKent Overstreet1-0/+1
Faster kernel compiles by way of fewer unnecessary includes. [akpm@linux-foundation.org: fix fallout] [akpm@linux-foundation.org: fix build] Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-08KEYS: Add payload preparsing opportunity prior to key instantiate or updateDavid Howells1-4/+14
Give the key type the opportunity to preparse the payload prior to the instantiation and update routines being called. This is done with the provision of two new key type operations: int (*preparse)(struct key_preparsed_payload *prep); void (*free_preparse)(struct key_preparsed_payload *prep); If the first operation is present, then it is called before key creation (in the add/update case) or before the key semaphore is taken (in the update and instantiate cases). The second operation is called to clean up if the first was called. preparse() is given the opportunity to fill in the following structure: struct key_preparsed_payload { char *description; void *type_data[2]; void *payload; const void *data; size_t datalen; size_t quotalen; }; Before the preparser is called, the first three fields will have been cleared, the payload pointer and size will be stored in data and datalen and the default quota size from the key_type struct will be stored into quotalen. The preparser may parse the payload in any way it likes and may store data in the type_data[] and payload fields for use by the instantiate() and update() ops. The preparser may also propose a description for the key by attaching it as a string to the description field. This can be used by passing a NULL or "" description to the add_key() system call or the key_create_or_update() function. This cannot work with request_key() as that required the description to tell the upcall about the key to be created. This, for example permits keys that store PGP public keys to generate their own name from the user ID and public key fingerprint in the key. The instantiate() and update() operations are then modified to look like this: int (*instantiate)(struct key *key, struct key_preparsed_payload *prep); int (*update)(struct key *key, struct key_preparsed_payload *prep); and the new payload data is passed in *prep, whether or not it was preparsed. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-10-02KEYS: Make the session and process keyrings per-threadDavid Howells1-5/+6
Make the session keyring per-thread rather than per-process, but still inherited from the parent thread to solve a problem with PAM and gdm. The problem is that join_session_keyring() will reject attempts to change the session keyring of a multithreaded program but gdm is now multithreaded before it gets to the point of starting PAM and running pam_keyinit to create the session keyring. See: https://bugs.freedesktop.org/show_bug.cgi?id=49211 The reason that join_session_keyring() will only change the session keyring under a single-threaded environment is that it's hard to alter the other thread's credentials to effect the change in a multi-threaded program. The problems are such as: (1) How to prevent two threads both running join_session_keyring() from racing. (2) Another thread's credentials may not be modified directly by this process. (3) The number of threads is uncertain whilst we're not holding the appropriate spinlock, making preallocation slightly tricky. (4) We could use TIF_NOTIFY_RESUME and key_replace_session_keyring() to get another thread to replace its keyring, but that means preallocating for each thread. A reasonable way around this is to make the session keyring per-thread rather than per-process and just document that if you want a common session keyring, you must get it before you spawn any threads - which is the current situation anyway. Whilst we're at it, we can the process keyring behave in the same way. This means we can clean up some of the ickyness in the creds code. Basically, after this patch, the session, process and thread keyrings are about inheritance rules only and not about sharing changes of keyring. Reported-by: Mantas M. <grawity@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Ray Strode <rstrode@redhat.com>
2012-09-28key: Fix resource leakAlan Cox1-2/+2
On an error iov may still have been reallocated and need freeing Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David Howells <dhowells@redhat.com>
2012-09-13userns: Convert security/keys to the new userns infrastructureEric W. Biederman1-20/+30
- Replace key_user ->user_ns equality checks with kuid_has_mapping checks. - Use from_kuid to generate key descriptions - Use kuid_t and kgid_t and the associated helpers instead of uid_t and gid_t - Avoid potential problems with file descriptor passing by displaying keys in the user namespace of the opener of key status proc files. Cc: linux-security-module@vger.kernel.org Cc: keyrings@linux-nfs.org Cc: David Howells <dhowells@redhat.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>