aboutsummaryrefslogtreecommitdiffstats
path: root/security/selinux/hooks.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2009-09-10sysfs: Add labeling support for sysfsDavid P. Quigley1-0/+5
This patch adds a setxattr handler to the file, directory, and symlink inode_operations structures for sysfs. The patch uses hooks introduced in the previous patch to handle the getting and setting of security information for the sysfs inodes. As was suggested by Eric Biederman the struct iattr in the sysfs_dirent structure has been replaced by a structure which contains the iattr, secdata and secdata length to allow the changes to persist in the event that the inode representing the sysfs_dirent is evicted. Because sysfs only stores this information when a change is made all the optional data is moved into one dynamically allocated field. This patch addresses an issue where SELinux was denying virtd access to the PCI configuration entries in sysfs. The lack of setxattr handlers for sysfs required that a single label be assigned to all entries in sysfs. Granting virtd access to every entry in sysfs is not an acceptable solution so fine grained labeling of sysfs is required such that individual entries can be labeled appropriately. [sds: Fixed compile-time warnings, coding style, and setting of inode security init flags.] Signed-off-by: David P. Quigley <dpquigl@tycho.nsa.gov> Signed-off-by: Stephen D. Smalley <sds@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org>
2009-09-10LSM/SELinux: inode_{get,set,notify}secctx hooks to access LSM security context information.David P. Quigley1-0/+29
This patch introduces three new hooks. The inode_getsecctx hook is used to get all relevant information from an LSM about an inode. The inode_setsecctx is used to set both the in-core and on-disk state for the inode based on a context derived from inode_getsecctx.The final hook inode_notifysecctx will notify the LSM of a change for the in-core state of the inode in question. These hooks are for use in the labeled NFS code and addresses concerns of how to set security on an inode in a multi-xattr LSM. For historical reasons Stephen Smalley's explanation of the reason for these hooks is pasted below. Quote Stephen Smalley inode_setsecctx: Change the security context of an inode. Updates the in core security context managed by the security module and invokes the fs code as needed (via __vfs_setxattr_noperm) to update any backing xattrs that represent the context. Example usage: NFS server invokes this hook to change the security context in its incore inode and on the backing file system to a value provided by the client on a SETATTR operation. inode_notifysecctx: Notify the security module of what the security context of an inode should be. Initializes the incore security context managed by the security module for this inode. Example usage: NFS client invokes this hook to initialize the security context in its incore inode to the value provided by the server for the file when the server returned the file's attributes to the client. Signed-off-by: David P. Quigley <dpquigl@tycho.nsa.gov> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-09-02KEYS: Add a keyctl to install a process's session keyring on its parent [try #6]David Howells1-0/+28
Add a keyctl to install a process's session keyring onto its parent. This replaces the parent's session keyring. Because the COW credential code does not permit one process to change another process's credentials directly, the change is deferred until userspace next starts executing again. Normally this will be after a wait*() syscall. To support this, three new security hooks have been provided: cred_alloc_blank() to allocate unset security creds, cred_transfer() to fill in the blank security creds and key_session_to_parent() - which asks the LSM if the process may replace its parent's session keyring. The replacement may only happen if the process has the same ownership details as its parent, and the process has LINK permission on the session keyring, and the session keyring is owned by the process, and the LSM permits it. Note that this requires alteration to each architecture's notify_resume path. This has been done for all arches barring blackfin, m68k* and xtensa, all of which need assembly alteration to support TIF_NOTIFY_RESUME. This allows the replacement to be performed at the point the parent process resumes userspace execution. This allows the userspace AFS pioctl emulation to fully emulate newpag() and the VIOCSETTOK and VIOCSETTOK2 pioctls, all of which require the ability to alter the parent process's PAG membership. However, since kAFS doesn't use PAGs per se, but rather dumps the keys into the session keyring, the session keyring of the parent must be replaced if, for example, VIOCSETTOK is passed the newpag flag. This can be tested with the following program: #include <stdio.h> #include <stdlib.h> #include <keyutils.h> #define KEYCTL_SESSION_TO_PARENT 18 #define OSERROR(X, S) do { if ((long)(X) == -1) { perror(S); exit(1); } } while(0) int main(int argc, char **argv) { key_serial_t keyring, key; long ret; keyring = keyctl_join_session_keyring(argv[1]); OSERROR(keyring, "keyctl_join_session_keyring"); key = add_key("user", "a", "b", 1, keyring); OSERROR(key, "add_key"); ret = keyctl(KEYCTL_SESSION_TO_PARENT); OSERROR(ret, "KEYCTL_SESSION_TO_PARENT"); return 0; } Compiled and linked with -lkeyutils, you should see something like: [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 355907932 --alswrv 4043 -1 \_ keyring: _uid.4043 [dhowells@andromeda ~]$ /tmp/newpag [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 1055658746 --alswrv 4043 4043 \_ user: a [dhowells@andromeda ~]$ /tmp/newpag hello [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: hello 340417692 --alswrv 4043 4043 \_ user: a Where the test program creates a new session keyring, sticks a user key named 'a' into it and then installs it on its parent. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-09-02CRED: Add some configurable debugging [try #6]David Howells1-1/+5
Add a config option (CONFIG_DEBUG_CREDENTIALS) to turn on some debug checking for credential management. The additional code keeps track of the number of pointers from task_structs to any given cred struct, and checks to see that this number never exceeds the usage count of the cred struct (which includes all references, not just those from task_structs). Furthermore, if SELinux is enabled, the code also checks that the security pointer in the cred struct is never seen to be invalid. This attempts to catch the bug whereby inode_has_perm() faults in an nfsd kernel thread on seeing cred->security be a NULL pointer (it appears that the credential struct has been previously released): http://www.kerneloops.org/oops.php?number=252883 Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-09-01selinux: Support for the new TUN LSM hooksPaul Moore1-2/+58
Add support for the new TUN LSM hooks: security_tun_dev_create(), security_tun_dev_post_create() and security_tun_dev_attach(). This includes the addition of a new object class, tun_socket, which represents the socks associated with TUN devices. The _tun_dev_create() and _tun_dev_post_create() hooks are fairly similar to the standard socket functions but _tun_dev_attach() is a bit special. The _tun_dev_attach() is unique because it involves a domain attaching to an existing TUN device and its associated tun_socket object, an operation which does not exist with standard sockets and most closely resembles a relabel operation. Signed-off-by: Paul Moore <paul.moore@hp.com> Acked-by: Eric Paris <eparis@parisplace.org> Signed-off-by: James Morris <jmorris@namei.org>
2009-08-21selinux: adjust rules for ATTR_FORCEAmerigo Wang1-5/+11
As suggested by OGAWA Hirofumi in thread: http://lkml.org/lkml/2009/8/7/132, we should let selinux_inode_setattr() to match our ATTR_* rules. ATTR_FORCE should not force things like ATTR_SIZE. [hirofumi@mail.parknet.co.jp: tweaks] Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: Eric Paris <eparis@redhat.com> Cc: Eugene Teo <eteo@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Morris <jmorris@namei.org>
2009-08-20Merge branch 'master' into nextJames Morris1-1/+2
Conflicts: security/Kconfig Manual fix. Signed-off-by: James Morris <jmorris@namei.org>
2009-08-17Security/SELinux: seperate lsm specific mmap_min_addrEric Paris1-1/+1
Currently SELinux enforcement of controls on the ability to map low memory is determined by the mmap_min_addr tunable. This patch causes SELinux to ignore the tunable and instead use a seperate Kconfig option specific to how much space the LSM should protect. The tunable will now only control the need for CAP_SYS_RAWIO and SELinux permissions will always protect the amount of low memory designated by CONFIG_LSM_MMAP_MIN_ADDR. This allows users who need to disable the mmap_min_addr controls (usual reason being they run WINE as a non-root user) to do so and still have SELinux controls preventing confined domains (like a web server) from being able to map some area of low memory. Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-08-17SELinux: call cap_file_mmap in selinux_file_mmapEric Paris1-1/+13
Currently SELinux does not check CAP_SYS_RAWIO in the file_mmap hook. This means there is no DAC check on the ability to mmap low addresses in the memory space. This function adds the DAC check for CAP_SYS_RAWIO while maintaining the selinux check on mmap_zero. This means that processes which need to mmap low memory will need CAP_SYS_RAWIO and mmap_zero but will NOT need the SELinux sys_rawio capability. Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-08-17SELinux: Convert avc_audit to use lsm_audit.hThomas Liu1-71/+71
Convert avc_audit in security/selinux/avc.c to use lsm_audit.h, for better maintainability. - changed selinux to use common_audit_data instead of avc_audit_data - eliminated code in avc.c and used code from lsm_audit.h instead. Had to add a LSM_AUDIT_NO_AUDIT to lsm_audit.h so that avc_audit can call common_lsm_audit and do the pre and post callbacks without doing the actual dump. This makes it so that the patched version behaves the same way as the unpatched version. Also added a denied field to the selinux_audit_data private space, once again to make it so that the patched version behaves like the unpatched. I've tested and confirmed that AVCs look the same before and after this patch. Signed-off-by: Thomas Liu <tliu@redhat.com> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org>
2009-08-14SELinux: add selinux_kernel_module_requestEric Paris1-0/+6
This patch adds a new selinux hook so SELinux can arbitrate if a given process should be allowed to trigger a request for the kernel to try to load a module. This is a different operation than a process trying to load a module itself, which is already protected by CAP_SYS_MODULE. Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-08-11SELinux: fix memory leakage in /security/selinux/hooks.cJames Morris1-1/+2
Fix memory leakage in /security/selinux/hooks.c The buffer always needs to be freed here; we either error out or allocate more memory. Reported-by: iceberg <strakh@ispras.ru> Signed-off-by: James Morris <jmorris@namei.org> Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
2009-08-06Security/SELinux: seperate lsm specific mmap_min_addrEric Paris1-1/+1
Currently SELinux enforcement of controls on the ability to map low memory is determined by the mmap_min_addr tunable. This patch causes SELinux to ignore the tunable and instead use a seperate Kconfig option specific to how much space the LSM should protect. The tunable will now only control the need for CAP_SYS_RAWIO and SELinux permissions will always protect the amount of low memory designated by CONFIG_LSM_MMAP_MIN_ADDR. This allows users who need to disable the mmap_min_addr controls (usual reason being they run WINE as a non-root user) to do so and still have SELinux controls preventing confined domains (like a web server) from being able to map some area of low memory. Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-08-06SELinux: call cap_file_mmap in selinux_file_mmapEric Paris1-1/+13
Currently SELinux does not check CAP_SYS_RAWIO in the file_mmap hook. This means there is no DAC check on the ability to mmap low addresses in the memory space. This function adds the DAC check for CAP_SYS_RAWIO while maintaining the selinux check on mmap_zero. This means that processes which need to mmap low memory will need CAP_SYS_RAWIO and mmap_zero but will NOT need the SELinux sys_rawio capability. Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-07-17kernel: rename is_single_threaded(task) to current_is_single_threaded(void)Oleg Nesterov1-1/+1
- is_single_threaded(task) is not safe unless task == current, we can't use task->signal or task->mm. - it doesn't make sense unless task == current, the task can fork right after the check. Rename it to current_is_single_threaded() and kill the argument. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-07-13Revert "SELinux: Convert avc_audit to use lsm_audit.h"James Morris1-71/+71
This reverts commit 8113a8d80f4c6a3dc3724b39b470f3fee9c426b6. The patch causes a stack overflow on my system during boot. Signed-off-by: James Morris <jmorris@namei.org>
2009-07-13SELinux: Convert avc_audit to use lsm_audit.hThomas Liu1-71/+71
Convert avc_audit in security/selinux/avc.c to use lsm_audit.h, for better maintainability and for less code duplication. - changed selinux to use common_audit_data instead of avc_audit_data - eliminated code in avc.c and used code from lsm_audit.h instead. I have tested to make sure that the avcs look the same before and after this patch. Signed-off-by: Thomas Liu <tliu@redhat.com> Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-06-25selinux: clean up avc node cache when disabling selinuxThomas Liu1-0/+3
Added a call to free the avc_node_cache when inside selinux_disable because it should not waste resources allocated during avc_init if SELinux is disabled and the cache will never be used. Signed-off-by: Thomas Liu <tliu@redhat.com> Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-06-25security: rename ptrace_may_access => ptrace_access_checkIngo Molnar1-3/+3
The ->ptrace_may_access() methods are named confusingly - the real ptrace_may_access() returns a bool, while these security checks have a retval convention. Rename it to ptrace_access_check, to reduce the confusion factor. [ Impact: cleanup, no code changed ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: James Morris <jmorris@namei.org>
2009-06-23selinux: restore optimization to selinux_file_permissionStephen Smalley1-5/+10
Restore the optimization to skip revalidation in selinux_file_permission if nothing has changed since the dentry_open checks, accidentally removed by 389fb800. Also remove redundant test from selinux_revalidate_file_permission. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Reviewed-by: Paul Moore <paul.moore@hp.com> Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-06-15Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6David S. Miller1-16/+8
Conflicts: Documentation/feature-removal-schedule.txt drivers/scsi/fcoe/fcoe.c net/core/drop_monitor.c net/core/net-traces.c
2009-06-03net: skb->dst accessorsEric Dumazet1-1/+1
Define three accessors to get/set dst attached to a skb struct dst_entry *skb_dst(const struct sk_buff *skb) void skb_dst_set(struct sk_buff *skb, struct dst_entry *dst) void skb_dst_drop(struct sk_buff *skb) This one should replace occurrences of : dst_release(skb->dst) skb->dst = NULL; Delete skb->dst field Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-08Merge branch 'master' into nextJames Morris1-1/+1
2009-05-05selinux: Fix send_sigiotask hookStephen Smalley1-1/+1
The CRED patch incorrectly converted the SELinux send_sigiotask hook to use the current task SID rather than the target task SID in its permission check, yielding the wrong permission check. This fixes the hook function. Detected by the ltp selinux testsuite and confirmed to correct the test failure. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org>
2009-04-30selinux: selinux_bprm_committed_creds() should wake up ->real_parent, not ->parent.Oleg Nesterov1-8/+3
We shouldn't worry about the tracer if current is ptraced, exec() must not succeed if the tracer has no rights to trace this task after cred changing. But we should notify ->real_parent which is, well, real parent. Also, we don't need _irq to take tasklist, and we don't need parent's ->siglock to wake_up_interruptible(real_parent->signal->wait_chldexit). Since we hold tasklist, real_parent->signal must be stable. Otherwise spin_lock(siglock) is not safe too and can't help anyway. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-04-30SELinux: Don't flush inherited SIGKILL during execve()David Howells1-4/+5
Don't flush inherited SIGKILL during execve() in SELinux's post cred commit hook. This isn't really a security problem: if the SIGKILL came before the credentials were changed, then we were right to receive it at the time, and should honour it; if it came after the creds were changed, then we definitely should honour it; and in any case, all that will happen is that the process will be scrapped before it ever returns to userspace. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-04-30SELinux: drop secondary_ops->sysctlEric Paris1-4/+0
We are still calling secondary_ops->sysctl even though the capabilities module does not define a sysctl operation. Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org>
2009-03-28selinux: Remove the "compat_net" compatibility codePaul Moore1-146/+7
The SELinux "compat_net" is marked as deprecated, the time has come to finally remove it from the kernel. Further code simplifications are likely in the future, but this patch was intended to be a simple, straight-up removal of the compat_net code. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-03-28netlabel: Label incoming TCP connections correctly in SELinuxPaul Moore1-39/+15
The current NetLabel/SELinux behavior for incoming TCP connections works but only through a series of happy coincidences that rely on the limited nature of standard CIPSO (only able to convey MLS attributes) and the write equality imposed by the SELinux MLS constraints. The problem is that network sockets created as the result of an incoming TCP connection were not on-the-wire labeled based on the security attributes of the parent socket but rather based on the wire label of the remote peer. The issue had to do with how IP options were managed as part of the network stack and where the LSM hooks were in relation to the code which set the IP options on these newly created child sockets. While NetLabel/SELinux did correctly set the socket's on-the-wire label it was promptly cleared by the network stack and reset based on the IP options of the remote peer. This patch, in conjunction with a prior patch that adjusted the LSM hook locations, works to set the correct on-the-wire label format for new incoming connections through the security_inet_conn_request() hook. Besides the correct behavior there are many advantages to this change, the most significant is that all of the NetLabel socket labeling code in SELinux now lives in hooks which can return error codes to the core stack which allows us to finally get ride of the selinux_netlbl_inode_permission() logic which greatly simplfies the NetLabel/SELinux glue code. In the process of developing this patch I also ran into a small handful of AF_INET6 cleanliness issues that have been fixed which should make the code safer and easier to extend in the future. Signed-off-by: Paul Moore <paul.moore@hp.com> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-03-10SELinux: inode_doinit_with_dentry drop no dentry printkEric Paris1-3/+9
Drop the printk message when an inode is found without an associated dentry. This should only happen when userspace can't be accessing those inodes and those labels will get set correctly on the next d_instantiate. Thus there is no reason to send this message. Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-03-06SELinux: open perm for sock filesEric Paris1-0/+2
When I did open permissions I didn't think any sockets would have an open. Turns out AF_UNIX sockets can have an open when they are bound to the filesystem namespace. This patch adds a new SOCK_FILE__OPEN permission. It's safe to add this as the open perms are already predicated on capabilities and capabilities means we have unknown perm handling so systems should be as backwards compatible as the policy wants them to be. https://bugzilla.redhat.com/show_bug.cgi?id=475224 Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org>
2009-02-14SELinux: NULL terminate al contexts from diskEric Paris1-2/+4
When a context is pulled in from disk we don't know that it is null terminated. This patch forecebly null terminates contexts when we pull them from disk. Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org>
2009-02-14SELinux: better printk when file with invalid label foundEric Paris1-4/+13
Currently when an inode is read into the kernel with an invalid label string (can often happen with removable media) we output a string like: SELinux: inode_doinit_with_dentry: context_to_sid([SOME INVALID LABEL]) returned -22 dor dev=[blah] ino=[blah] Which is all but incomprehensible to all but a couple of us. Instead, on EINVAL only, I plan to output a much more user friendly string and I plan to ratelimit the printk since many of these could be generated very rapidly. Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org>
2009-02-14SELinux: call capabilities code directoryEric Paris1-17/+13
For cleanliness and efficiency remove all calls to secondary-> and instead call capabilities code directly. capabilities are the only module that selinux stacks with and so the code should not indicate that other stacking might be possible. Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org>
2009-02-02selinux: remove hooks which simply defer to capabilitiesJames Morris1-58/+10
Remove SELinux hooks which do nothing except defer to the capabilites hooks (or in one case, replicates the function). Signed-off-by: James Morris <jmorris@namei.org> Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
2009-01-30selinux: remove secondary ops call to shm_shmatJames Morris1-5/+0
Remove secondary ops call to shm_shmat, which is a noop in capabilities. Acked-by: Serge Hallyn <serue@us.ibm.com> Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-01-30selinux: remove secondary ops call to unix_stream_connectJames Morris1-4/+0
Remove secondary ops call to unix_stream_connect, which is a noop in capabilities. Acked-by: Serge Hallyn <serue@us.ibm.com> Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-01-30selinux: remove secondary ops call to task_killJames Morris1-4/+0
Remove secondary ops call to task_kill, which is a noop in capabilities. Acked-by: Serge Hallyn <serue@us.ibm.com> Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-01-30selinux: remove secondary ops call to task_setrlimitJames Morris1-5/+0
Remove secondary ops call to task_setrlimit, which is a noop in capabilities. Acked-by: Serge Hallyn <serue@us.ibm.com> Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-01-30selinux: remove unused cred_commit hookJames Morris1-9/+0
Remove unused cred_commit hook from SELinux. This currently calls into the capabilities hook, which is a noop. Acked-by: Serge Hallyn <serue@us.ibm.com> Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-01-30selinux: remove secondary ops call to task_createJames Morris1-6/+0
Remove secondary ops call to task_create, which is a noop in capabilities. Acked-by: Serge Hallyn <serue@us.ibm.com> Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-01-30selinux: remove secondary ops call to file_mprotectJames Morris1-6/+1
Remove secondary ops call to file_mprotect, which is a noop in capabilities. Acked-by: Serge Hallyn <serue@us.ibm.com> Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-01-30selinux: remove secondary ops call to inode_setattrJames Morris1-5/+0
Remove secondary ops call to inode_setattr, which is a noop in capabilities. Acked-by: Serge Hallyn <serue@us.ibm.com> Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-01-30selinux: remove secondary ops call to inode_permissionJames Morris1-5/+0
Remove secondary ops call to inode_permission, which is a noop in capabilities. Acked-by: Serge Hallyn <serue@us.ibm.com> Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-01-30selinux: remove secondary ops call to inode_follow_linkJames Morris1-4/+0
Remove secondary ops call to inode_follow_link, which is a noop in capabilities. Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-01-30selinux: remove secondary ops call to inode_mknodJames Morris1-6/+0
Remove secondary ops call to inode_mknod, which is a noop in capabilities. Acked-by: Serge Hallyn <serue@us.ibm.com> Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-01-30selinux: remove secondary ops call to inode_unlinkJames Morris1-5/+0
Remove secondary ops call to inode_unlink, which is a noop in capabilities. Acked-by: Serge Hallyn <serue@us.ibm.com> Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-01-30selinux: remove secondary ops call to inode_linkJames Morris1-5/+0
Remove secondary ops call to inode_link, which is a noop in capabilities. Acked-by: Serge Hallyn <serue@us.ibm.com> Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-01-30selinux: remove secondary ops call to sb_umountJames Morris1-5/+0
Remove secondary ops call to sb_umount, which is a noop in capabilities. Acked-by: Serge Hallyn <serue@us.ibm.com> Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-01-30selinux: remove secondary ops call to sb_mountJames Morris1-5/+0
Remove secondary ops call to sb_mount, which is a noop in capabilities. Acked-by: Serge Hallyn <serue@us.ibm.com> Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>