Age | Commit message (Collapse) | Author | Files | Lines |
|
Hi,
This is the third submission of the network driver for PS3.
The differences from the previous one are:
- renamed source file names so that their prefix can match
with the module name
- added cbe-oss-dev@ozlabs.org line for MAINTAINER file
- changed some in copyright comments
If there are no more comments, please apply for 2.6.23.
Thank you
--
Subject: PS3: Ethernet driver
From: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Add Gigabit Ethernet support for the PS3 game console. The module will
be called ps3_gelic.
CC: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
It needs writesb(), not available on all platforms.
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
This patch introduces a capability flag that is used by the DLPAR userspace
tool to check which DLPAR features are supported by the eHEA driver.
Missing goto has been included.
Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
Unmaintained, superceded by skge.
Prodded to deletion by Adrian Bunk. Acked by Stephen Hemminger.
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
This patch fixes the following section mismatch:
<-- snip -->
...
MODPOST vmlinux
WARNING: drivers/built-in.o(.text+0x272f8b): Section mismatch: reference to .init.text:quattro_pci_find (between 'happy_meal_pci_probe' and 'happy_meal_pci_remove')
...
<-- snip -->
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
At present, when a device is enslaved to bonding, if ipv6 is
active then addrconf will be initated on the slave (because it is closed
then opened during the enslavement processing). This causes DAD and RS
packets to be sent from the slave. These packets in turn can confuse
switches that perform ipv6 snooping, causing them to incorrectly update
their forwarding tables (if, e.g., the slave being added is an inactve
backup that won't be used right away) and direct traffic away from the
active slave to a backup slave (where the incoming packets will be
dropped).
This patch alters the behavior so that addrconf will only run on
the master device itself. I believe this is logically correct, as it
prevents slaves from having an IPv6 identity independent from the
master. This is consistent with the IPv4 behavior for bonding.
This is accomplished by (a) having bonding set IFF_SLAVE sooner
in the enslavement processing than currently occurs (before open, not
after), and (b) having ipv6 addrconf ignore UP and CHANGE events on
slave devices.
The eql driver also uses the IFF_SLAVE flag. I inspected eql,
and I believe this change is reasonable for its usage of IFF_SLAVE, but
I did not test it.
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
Code will do local_irq_save() on it.
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
usbnet_probe() handles a positive return value from the driver bind()
function as success, but will later only setup the status handler if the
return value was zero, leading to confusion. Patch adjusts this to accept
positive values as success in both checks.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
Get rid of dubious casts to (void *) which causes a sparse warning.
And move largeish function from inline to the one file that uses the code,
the compiler can then decide to inline it.
Compile tested only.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
Based on an original idea by John W. Linville.
It is the missing part of 42d45ccd60636c28e35c2016f091783bc14ad99c
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
Add 88E1112 PHY ID to the marvell driver. Seems to do fine with the
88E1111 inits.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
Simplify the marvell driver init a bit: Make the supported devices an
array instead of explicitly registering each structure. This makes it
considerably easier to add new devices down the road.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
Support for the Asix AX88796 network controller, an
NE2000 compatible 10/100 ethernet device with internal
PHY.
The driver supports PHY settings via either ioctl() or
the ethtool driver ops.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
Here's a slightly cleaner way of creating the /proc structure for the
pnx8850. mostly, it creates a directory with default mode 555, since the
one you're creating is mode 444, which is somewhat unusual for a directory
under /proc.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Using another systems defines is a safe way to get your code broken by
accident when that system is removed.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
MODPOST vmlinux
WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x974): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done')
WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x980): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done')
WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x978): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done')
WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x984): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done')
WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x98c): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done')
WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x990): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done')
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
This patch is an workaround for these sparse warnings:
linux/include/linux/calc64.h:25:17: warning: symbol '__quot' shadows an earlier one
linux/include/linux/calc64.h:25:17: originally declared here
linux/include/linux/calc64.h:25:17: warning: symbol '__mod' shadows an earlier one
linux/include/linux/calc64.h:25:17: originally declared here
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
MODPOST vmlinux
WARNING: arch/mips/mm/built-in.o(.text+0x1978): Section mismatch: reference to .init.text:except_vec2_sb1 (between 'sb1_cache_init' and 'sb1_flush_cache_sigtramp')
WARNING: arch/mips/mm/built-in.o(.text+0x1988): Section mismatch: reference to .init.text:except_vec2_sb1 (between 'sb1_cache_init' and 'sb1_flush_cache_sigtramp')
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
MODPOST vmlinux
WARNING: arch/mips/philips/pnx8550/common/built-in.o(.text+0xd40): Section mismatch: reference to .init.data: (after 'pnx8550_platform_init')
WARNING: arch/mips/philips/pnx8550/common/built-in.o(.text+0xd44): Section mismatch: reference to .init.data: (after 'pnx8550_platform_init')
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
MODPOST vmlinux
WARNING: arch/mips/au1000/common/built-in.o(.text+0x1750): Section mismatch: reference to .init.data: (between 'au1xxx_platform_init' and '__fixup_bigphys_addr')
WARNING: arch/mips/au1000/common/built-in.o(.text+0x1754): Section mismatch: reference to .init.data: (between 'au1xxx_platform_init' and '__fixup_bigphys_addr')
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
LD vmlinux
SYSMAP System.map
SYSMAP .tmp_System.map
MODPOST vmlinux
WARNING: drivers/built-in.o(.data+0x2480): Section mismatch: reference to .init.text: (between 'sercons' and 'ds_parms')
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|