aboutsummaryrefslogtreecommitdiffstats
path: root/security (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2018-09-19libfdt: Ensure INT_MAX is defined in libfdt_env.hRob Herring3-0/+5
The next update of libfdt has a new dependency on INT_MAX. Update the instances of libfdt_env.h in the kernel to either include the necessary header with the definition or define it locally. Cc: Russell King <linux@armlinux.org.uk> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linux-arm-kernel@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Rob Herring <robh@kernel.org>
2018-09-19of/unittest: Fix I2C bus unit-address errorRob Herring2-4/+4
dtc has new checks for I2C buses. Fix the warnings in unit-addresses in the unittests. drivers/of/unittest-data/testcases.dtb: Warning (i2c_bus_reg): /testcase-data/overlay-node/test-bus/i2c-test-bus/test-unittest14/i2c@0/test-mux-dev: I2C bus unit address format error, expected "20" drivers/of/unittest-data/overlay_15.dtb: Warning (i2c_bus_reg): /fragment@0/__overlay__/test-unittest15/i2c@0/test-mux-dev: I2C bus unit address format error, expected "20" Cc: Frank Rowand <frowand.list@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2018-09-11of: fix phandle cache creation for DTs with no phandlesRob Herring1-0/+3
With commit 0b3ce78e90fc ("of: cache phandle nodes to reduce cost of of_find_node_by_phandle()"), a G3 PowerMac fails to boot. The root cause is the DT for this system has no phandle properties when booted with BootX. of_populate_phandle_cache() does not handle the case of no phandles correctly. The problem is roundup_pow_of_two() for 0 is undefined. The implementation subtracts 1 underflowing and then things are in the weeds. Fixes: 0b3ce78e90fc ("of: cache phandle nodes to reduce cost of of_find_node_by_phandle()") Cc: stable@vger.kernel.org # 4.17+ Reported-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Stan Johnson <userm57@yahoo.com> Reviewed-by: Frank Rowand <frank.rowand@sony.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Rob Herring <robh@kernel.org>
2018-09-07of: make default address and size cells sizes privateRob Herring3-9/+8
Only some old OpenFirmware implementations rely on default sizes. Any FDT and modern implementation should have explicit properties. Make the OF_ROOT_NODE_*_CELLS_DEFAULT defines private so we don't get any outside users. This also gets us one step closer to removing the asm/prom.h dependency on Sparc. Cc: "David S. Miller" <davem@davemloft.net> Cc: Frank Rowand <frowand.list@gmail.com> Cc: sparclinux@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2018-09-07of: make PowerMac cache node search conditional on CONFIG_PPC_PMACRob Herring1-1/+1
Cache nodes under the cpu node(s) is PowerMac specific according to the comment above, so make the code enforce that. Signed-off-by: Rob Herring <robh@kernel.org>
2018-09-07vsprintf: print OF node name using full_nameRob Herring1-1/+6
In preparation to remove the node name pointer from struct device_node, convert the node name print to get the node name from the full name. Reviewed-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2018-09-07of: Convert to using %pOFn instead of device_node.nameRob Herring6-22/+23
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Reviewed-by: Frank Rowand <frank.rowand@sony.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: netdev@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2018-09-04of/unittest: add printf tests for node nameRob Herring1-0/+4
Add some printf test for printing the node name (without the unit-address). Reviewed-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2018-09-04of/unittest: remove use of node name pointer in overlay high level testRob Herring1-5/+8
In preparation for removing the node name pointer, it needs to be removed from of_unittest_overlay_high_level. However, it's not really correct to use the node name without the unit-address and we should use the full node name. This most easily done by iterating over the child nodes with for_each_child_of_node() which is what of_get_child_by_name() does internally. While at it, we might as well convert the outer loop to use for_each_child_of_node() too instead of open coding it. Reviewed-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2018-09-02Linux 4.19-rc2Linus Torvalds1-1/+1
2018-09-02x86/pti: Fix section mismatch warning/errorRandy Dunlap1-1/+1
Fix the section mismatch warning in arch/x86/mm/pti.c: WARNING: vmlinux.o(.text+0x6972a): Section mismatch in reference from the function pti_clone_pgtable() to the function .init.text:pti_user_pagetable_walk_pte() The function pti_clone_pgtable() references the function __init pti_user_pagetable_walk_pte(). This is often because pti_clone_pgtable lacks a __init annotation or the annotation of pti_user_pagetable_walk_pte is wrong. FATAL: modpost: Section mismatches detected. Fixes: 85900ea51577 ("x86/pti: Map the vsyscall page if needed") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Link: https://lkml.kernel.org/r/43a6d6a3-d69d-5eda-da09-0b1c88215a2a@infradead.org
2018-09-01x86/vdso: Fix lsl operand orderSamuel Neves1-1/+1
In the __getcpu function, lsl is using the wrong target and destination registers. Luckily, the compiler tends to choose %eax for both variables, so it has been working so far. Fixes: a582c540ac1b ("x86/vdso: Use RDPID in preference to LSL when available") Signed-off-by: Samuel Neves <sneves@dei.uc.pt> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180901201452.27828-1-sneves@dei.uc.pt
2018-09-01x86/mce: Fix set_mce_nospec() to avoid #GP faultLuckTony1-1/+24
The trick with flipping bit 63 to avoid loading the address of the 1:1 mapping of the poisoned page while the 1:1 map is updated used to work when unmapping the page. But it falls down horribly when attempting to directly set the page as uncacheable. The problem is that when the cache mode is changed to uncachable, the pages needs to be flushed from the cache first. But the decoy address is non-canonical due to bit 63 flipped, and the CLFLUSH instruction throws a #GP fault. Add code to change_page_attr_set_clr() to fix the address before calling flush. Fixes: 284ce4011ba6 ("x86/memory_failure: Introduce {set, clear}_mce_nospec()") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Anvin <hpa@zytor.com> Cc: Borislav Petkov <bp@alien8.de> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Link: https://lkml.kernel.org/r/20180831165506.GA9605@agluck-desk
2018-08-31x86/efi: Load fixmap GDT in efi_call_phys_epilog()Joerg Roedel1-6/+2
When PTI is enabled on x86-32 the kernel uses the GDT mapped in the fixmap for the simple reason that this address is also mapped for user-space. The efi_call_phys_prolog()/efi_call_phys_epilog() wrappers change the GDT to call EFI runtime services and switch back to the kernel GDT when they return. But the switch-back uses the writable GDT, not the fixmap GDT. When that happened and and the CPU returns to user-space it switches to the user %cr3 and tries to restore user segment registers. This fails because the writable GDT is not mapped in the user page-table, and without a GDT the fault handlers also can't be launched. The result is a triple fault and reboot of the machine. Fix that by restoring the GDT back to the fixmap GDT which is also mapped in the user page-table. Fixes: 7757d607c6b3 x86/pti: ('Allow CONFIG_PAGE_TABLE_ISOLATION for x86_32') Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Guenter Roeck <linux@roeck-us.net> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: hpa@zytor.com Cc: linux-efi@vger.kernel.org Link: https://lkml.kernel.org/r/1535702738-10971-1-git-send-email-joro@8bytes.org
2018-08-31x86/nmi: Fix NMI uaccess race against CR3 switchingAndy Lutomirski4-1/+53
A NMI can hit in the middle of context switching or in the middle of switch_mm_irqs_off(). In either case, CR3 might not match current->mm, which could cause copy_from_user_nmi() and friends to read the wrong memory. Fix it by adding a new nmi_uaccess_okay() helper and checking it in copy_from_user_nmi() and in __copy_from_user_nmi()'s callers. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Rik van Riel <riel@surriel.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Jann Horn <jannh@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/dd956eba16646fd0b15c3c0741269dfd84452dac.1535557289.git.luto@kernel.org
2018-08-31x86: Allow generating user-space headers without a compilerBen Hutchings1-4/+7
When bootstrapping an architecture, it's usual to generate the kernel's user-space headers (make headers_install) before building a compiler. Move the compiler check (for asm goto support) to the archprepare target so that it is only done when building code for the target. Fixes: e501ce957a78 ("x86: Force asm-goto") Reported-by: Helmut Grohne <helmutg@debian.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180829194317.GA4765@decadent.org.uk
2018-08-31x86/dumpstack: Don't dump kernel memory based on usermode RIPJann Horn3-5/+15
show_opcodes() is used both for dumping kernel instructions and for dumping user instructions. If userspace causes #PF by jumping to a kernel address, show_opcodes() can be reached with regs->ip controlled by the user, pointing to kernel code. Make sure that userspace can't trick us into dumping kernel memory into dmesg. Fixes: 7cccf0725cf7 ("x86/dumpstack: Add a show_ip() function") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: security@kernel.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180828154901.112726-1-jannh@google.com
2018-08-31of: Add device_type access helper functionsRob Herring1-0/+12
In preparation to remove direct access to device_node.type, add of_node_is_type() and of_node_get_device_type() helpers to check and retrieve the device type. Cc: Frank Rowand <frowand.list@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2018-08-31cpu/hotplug: Remove skip_onerr field from cpuhp_step structureMukesh Ojha1-22/+4
When notifiers were there, `skip_onerr` was used to avoid calling particular step startup/teardown callbacks in the CPU up/down rollback path, which made the hotplug asymmetric. As notifiers are gone now after the full state machine conversion, the `skip_onerr` field is no longer required. Remove it from the structure and its usage. Signed-off-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/1535439294-31426-1-git-send-email-mojha@codeaurora.org
2018-08-31arm64: mm: always enable CONFIG_HOLES_IN_ZONEJames Morse1-1/+0
Commit 6d526ee26ccd ("arm64: mm: enable CONFIG_HOLES_IN_ZONE for NUMA") only enabled HOLES_IN_ZONE for NUMA systems because the NUMA code was choking on the missing zone for nomap pages. This problem doesn't just apply to NUMA systems. If the architecture doesn't set HAVE_ARCH_PFN_VALID, pfn_valid() will return true if the pfn is part of a valid sparsemem section. When working with multiple pages, the mm code uses pfn_valid_within() to test each page it uses within the sparsemem section is valid. On most systems memory comes in MAX_ORDER_NR_PAGES chunks which all have valid/initialised struct pages. In this case pfn_valid_within() is optimised out. Systems where this isn't true (e.g. due to nomap) should set HOLES_IN_ZONE and provide HAVE_ARCH_PFN_VALID so that mm tests each page as it works with it. Currently non-NUMA arm64 systems can't enable HOLES_IN_ZONE, leading to a VM_BUG_ON(): | page:fffffdff802e1780 is uninitialized and poisoned | raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff | raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff | page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p)) | ------------[ cut here ]------------ | kernel BUG at include/linux/mm.h:978! | Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [...] | CPU: 1 PID: 25236 Comm: dd Not tainted 4.18.0 #7 | Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 | pstate: 40000085 (nZcv daIf -PAN -UAO) | pc : move_freepages_block+0x144/0x248 | lr : move_freepages_block+0x144/0x248 | sp : fffffe0071177680 [...] | Process dd (pid: 25236, stack limit = 0x0000000094cc07fb) | Call trace: | move_freepages_block+0x144/0x248 | steal_suitable_fallback+0x100/0x16c | get_page_from_freelist+0x440/0xb20 | __alloc_pages_nodemask+0xe8/0x838 | new_slab+0xd4/0x418 | ___slab_alloc.constprop.27+0x380/0x4a8 | __slab_alloc.isra.21.constprop.26+0x24/0x34 | kmem_cache_alloc+0xa8/0x180 | alloc_buffer_head+0x1c/0x90 | alloc_page_buffers+0x68/0xb0 | create_empty_buffers+0x20/0x1ec | create_page_buffers+0xb0/0xf0 | __block_write_begin_int+0xc4/0x564 | __block_write_begin+0x10/0x18 | block_write_begin+0x48/0xd0 | blkdev_write_begin+0x28/0x30 | generic_perform_write+0x98/0x16c | __generic_file_write_iter+0x138/0x168 | blkdev_write_iter+0x80/0xf0 | __vfs_write+0xe4/0x10c | vfs_write+0xb4/0x168 | ksys_write+0x44/0x88 | sys_write+0xc/0x14 | el0_svc_naked+0x30/0x34 | Code: aa1303e0 90001a01 91296421 94008902 (d4210000) | ---[ end trace 1601ba47f6e883fe ]--- Remove the NUMA dependency. Link: https://www.spinics.net/lists/arm-kernel/msg671851.html Cc: <stable@vger.kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reported-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com> Tested-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-08-31m68k/mac: Use correct PMU response formatFinn Thain1-6/+4
Now that the 68k Mac port has adopted the via-pmu driver, it must decode the PMU response accordingly otherwise the date and time will be wrong. Fixes: ebd722275f9cfc67 ("macintosh/via-pmu: Replace via-pmu68k driver with via-pmu driver") Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2018-08-30disable stringop truncation warnings for nowStephen Rothwell1-0/+3
They are too noisy Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-30clk: x86: Set default parent to 48MhzAkshu Agrawal1-1/+1
System clk provided in ST soc can be set to: 48Mhz, non-spread 25Mhz, spread To get accurate rate, we need it to set it at non-spread option which is 48Mhz. Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Fixes: 421bf6a1f061 ("clk: x86: Add ST oscout platform clock") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-08-30i2c: sh_mobile: fix leak when using DMA bounce bufferWolfram Sang1-2/+4
We only freed the bounce buffer after successful DMA, missing the cases where DMA setup may have gone wrong. Use a better location which always gets called after each message and use 'stop_after_dma' as a flag for a successful transfer. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-08-30i2c: sh_mobile: define start_ch() void as it only returns 0 anyhowWolfram Sang1-6/+3
After various refactoring over the years, start_ch() doesn't return errno anymore, so make the function return void. This saves the error handling when calling it which in turn eases cleanup of resources of a future patch. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-08-30i2c: refactor function to release a DMA safe bufferWolfram Sang4-10/+15
a) rename to 'put' instead of 'release' to match 'get' when obtaining the buffer b) change the argument order to have the buffer as first argument c) add a new argument telling the function if the message was transferred. This allows the function to be used also in cases where setting up DMA failed, so the buffer needs to be freed without syncing to the message buffer. Also convert the only user. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-08-30i2c: algos: bit: make the error messages grepableJan Kundrát1-24/+31
Yep, I went looking for one of these, and I wasn't able to find it easily. That's worse than a line which is 82-chars long, IMHO. Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-08-30i2c: designware: Re-init controllers with pm_disabled set on resumeHans de Goede2-2/+6
On Bay Trail and Cherry Trail devices we set the pm_disabled flag for I2C busses which the OS shares with the PUNIT as these need special handling. Until now we called dev_pm_syscore_device(dev, true) for I2C controllers with this flag set to keep these I2C controllers always on. After commit 12864ff8545f ("ACPI / LPSS: Avoid PM quirks on suspend and resume from hibernation"), this no longer works. This commit modifies lpss_iosf_exit_d3_state() to only run if lpss_iosf_enter_d3_state() has ran before it, so that it does not run on a resume from hibernate (or from S3). On these systems the conditions for lpss_iosf_enter_d3_state() to run never become true, so lpss_iosf_exit_d3_state() never gets called and the 2 LPSS DMA controllers never get forced into D0 mode, instead they are left in their default automatic power-on when needed mode. The not forcing of D0 mode for the DMA controllers enables these systems to properly enter S0ix modes, which is a good thing. But after entering S0ix modes the I2C controller connected to the PMIC no longer works, leading to e.g. broken battery monitoring. The _PS3 method for this I2C controller looks like this: Method (_PS3, 0, NotSerialized) // _PS3: Power State 3 { If ((((PMID == 0x04) || (PMID == 0x05)) || (PMID == 0x06))) { Return (Zero) } PSAT |= 0x03 Local0 = PSAT /* \_SB_.I2C5.PSAT */ } Where PMID = 0x05, so we enter the Return (Zero) path on these systems. So even if we were to not call dev_pm_syscore_device(dev, true) the I2C controller will be left in D0 rather then be switched to D3. Yet on other Bay and Cherry Trail devices S0ix is not entered unless *all* I2C controllers are in D3 mode. This combined with the I2C controller no longer working now that we reach S0ix states on these systems leads to me believing that the PUNIT itself puts the I2C controller in D3 when all other conditions for entering S0ix states are true. Since now the I2C controller is put in D3 over a suspend/resume we must re-initialize it afterwards and that does indeed fix it no longer working. This commit implements this fix by: 1) Making the suspend_late callback a no-op if pm_disabled is set and making the resume_early callback skip the clock re-enable (since it now was not disabled) while still doing the necessary I2C controller re-init. 2) Removing the dev_pm_syscore_device(dev, true) call, so that the suspend and resume callbacks are actually called. Normally this would cause the ACPI pm code to call _PS3 putting the I2C controller in D3, wreaking havoc since it is shared with the PUNIT, but in this special case the _PS3 method is a no-op so we can safely allow a "fake" suspend / resume. Fixes: 12864ff8545f ("ACPI / LPSS: Avoid PM quirks on suspend and resume ...") Link: https://bugzilla.kernel.org/show_bug.cgi?id=200861 Cc: 4.15+ <stable@vger.kernel.org> # 4.15+ Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-08-30i2c: i801: Allow ACPI AML access I/O ports not reserved for SMBusMika Westerberg1-1/+8
Commit 7ae81952cda ("i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR") made it possible for AML code to access SMBus I/O ports by installing custom SystemIO OpRegion handler and blocking i80i driver access upon first AML read/write to this OpRegion. However, while ThinkPad T560 does have SystemIO OpRegion declared under the SMBus device, it does not access any of the SMBus registers: Device (SMBU) { ... OperationRegion (SMBP, PCI_Config, 0x50, 0x04) Field (SMBP, DWordAcc, NoLock, Preserve) { , 5, TCOB, 11, Offset (0x04) } Name (TCBV, 0x00) Method (TCBS, 0, NotSerialized) { If ((TCBV == 0x00)) { TCBV = (\_SB.PCI0.SMBU.TCOB << 0x05) } Return (TCBV) /* \_SB_.PCI0.SMBU.TCBV */ } OperationRegion (TCBA, SystemIO, TCBS (), 0x10) Field (TCBA, ByteAcc, NoLock, Preserve) { Offset (0x04), , 9, CPSC, 1 } } Problem with the current approach is that it blocks all I/O port access and because this system has touchpad connected to the SMBus controller after first AML access (happens during suspend/resume cycle) the touchpad fails to work anymore. Fix this so that we allow ACPI AML I/O port access if it does not touch the region reserved for the SMBus. Fixes: 7ae81952cda ("i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR") Link: https://bugzilla.kernel.org/show_bug.cgi?id=200737 Reported-by: Yussuf Khalil <dev@pp3345.net> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-08-30of: add node name compare helper functionsRob Herring2-0/+35
In preparation to remove device_node.name pointer, add helper functions for node name comparisons which are a common pattern throughout the kernel. Cc: Frank Rowand <frowand.list@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2018-08-30arm/arm64: smccc-1.1: Handle function result as parametersMarc Zyngier1-10/+20
If someone has the silly idea to write something along those lines: extern u64 foo(void); void bar(struct arm_smccc_res *res) { arm_smccc_1_1_smc(0xbad, foo(), res); } they are in for a surprise, as this gets compiled as: 0000000000000588 <bar>: 588: a9be7bfd stp x29, x30, [sp, #-32]! 58c: 910003fd mov x29, sp 590: f9000bf3 str x19, [sp, #16] 594: aa0003f3 mov x19, x0 598: aa1e03e0 mov x0, x30 59c: 94000000 bl 0 <_mcount> 5a0: 94000000 bl 0 <foo> 5a4: aa0003e1 mov x1, x0 5a8: d4000003 smc #0x0 5ac: b4000073 cbz x19, 5b8 <bar+0x30> 5b0: a9000660 stp x0, x1, [x19] 5b4: a9010e62 stp x2, x3, [x19, #16] 5b8: f9400bf3 ldr x19, [sp, #16] 5bc: a8c27bfd ldp x29, x30, [sp], #32 5c0: d65f03c0 ret 5c4: d503201f nop The call to foo "overwrites" the x0 register for the return value, and we end up calling the wrong secure service. A solution is to evaluate all the parameters before assigning anything to specific registers, leading to the expected result: 0000000000000588 <bar>: 588: a9be7bfd stp x29, x30, [sp, #-32]! 58c: 910003fd mov x29, sp 590: f9000bf3 str x19, [sp, #16] 594: aa0003f3 mov x19, x0 598: aa1e03e0 mov x0, x30 59c: 94000000 bl 0 <_mcount> 5a0: 94000000 bl 0 <foo> 5a4: aa0003e1 mov x1, x0 5a8: d28175a0 mov x0, #0xbad 5ac: d4000003 smc #0x0 5b0: b4000073 cbz x19, 5bc <bar+0x34> 5b4: a9000660 stp x0, x1, [x19] 5b8: a9010e62 stp x2, x3, [x19, #16] 5bc: f9400bf3 ldr x19, [sp, #16] 5c0: a8c27bfd ldp x29, x30, [sp], #32 5c4: d65f03c0 ret Reported-by: Julien Grall <julien.grall@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-08-30x86/asm: Use CC_SET()/CC_OUT() in __gen_sigismember()Uros Bizjak1-3/+4
Replace open-coded set instructions with CC_SET()/CC_OUT(). Signed-off-by: Uros Bizjak <ubizjak@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20180814165951.13538-1-ubizjak@gmail.com
2018-08-30x86/alternatives: Lockdep-enforce text_mutex in text_poke*()Jiri Kosina1-4/+5
text_poke() and text_poke_bp() must be called with text_mutex held. Put proper lockdep anotation in place instead of just mentioning the requirement in a comment. Reported-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Link: https://lkml.kernel.org/r/nycvar.YFH.7.76.1808280853520.25787@cbobk.fhfr.pm
2018-08-30objtool: Remove workaround for unreachable warnings from old GCCMasahiro Yamada1-2/+0
Commit cafa0010cd51 ("Raise the minimum required gcc version to 4.6") bumped the minimum GCC version to 4.6 for all architectures. This effectively reverts commit da541b20021c ("objtool: Skip unreachable warnings for GCC 4.4 and older"), which was a workaround for GCC 4.4 or older. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Michal Marek <michal.lkml@markovi.net> Cc: linux-kbuild@vger.kernel.org Link: https://lkml.kernel.org/r/1535341183-19994-1-git-send-email-yamada.masahiro@socionext.com
2018-08-30notifier: Remove notifier header file wherever not usedMukesh Ojha7-7/+0
The conversion of the hotplug notifiers to a state machine left the notifier.h includes around in some places. Remove them. Signed-off-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1535114033-4605-1-git-send-email-mojha@codeaurora.org
2018-08-30watchdog: Mark watchdog touch functions as notraceVincent Whitchurch3-4/+4
Some architectures need to use stop_machine() to patch functions for ftrace, and the assumption is that the stopped CPUs do not make function calls to traceable functions when they are in the stopped state. Commit ce4f06dcbb5d ("stop_machine: Touch_nmi_watchdog() after MULTI_STOP_PREPARE") added calls to the watchdog touch functions from the stopped CPUs and those functions lack notrace annotations. This leads to crashes when enabling/disabling ftrace on ARM kernels built with the Thumb-2 instruction set. Fix it by adding the necessary notrace annotations. Fixes: ce4f06dcbb5d ("stop_machine: Touch_nmi_watchdog() after MULTI_STOP_PREPARE") Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: oleg@redhat.com Cc: tj@kernel.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180821152507.18313-1-vincent.whitchurch@axis.com
2018-08-30x86/entry/64: Wipe KASAN stack shadow before rewind_stack_do_exit()Jann Horn1-0/+4
Reset the KASAN shadow state of the task stack before rewinding RSP. Without this, a kernel oops will leave parts of the stack poisoned, and code running under do_exit() can trip over such poisoned regions and cause nonsensical false-positive KASAN reports about stack-out-of-bounds bugs. This does not wipe the exception stacks; if an oops happens on an exception stack, it might result in random KASAN false-positives from other tasks afterwards. This is probably relatively uninteresting, since if the kernel oopses on an exception stack, there are most likely bigger things to worry about. It'd be more interesting if vmapped stacks and KASAN were compatible, since then handle_stack_overflow() would oops from exception stack context. Fixes: 2deb4be28077 ("x86/dumpstack: When OOPSing, rewind the stack before do_exit()") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: kasan-dev@googlegroups.com Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180828184033.93712-1-jannh@google.com
2018-08-30x86/irqflags: Mark native_restore_fl extern inlineNick Desaulniers1-1/+2
This should have been marked extern inline in order to pick up the out of line definition in arch/x86/kernel/irqflags.S. Fixes: 208cbb325589 ("x86/irqflags: Provide a declaration for native_save_fl") Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Juergen Gross <jgross@suse.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180827214011.55428-1-ndesaulniers@google.com
2018-08-30x86/build: Remove jump label quirk for GCC older than 4.5.2Masahiro Yamada2-16/+0
Commit cafa0010cd51 ("Raise the minimum required gcc version to 4.6") bumped the minimum GCC version to 4.6 for all architectures. Remove the workaround code. It was the only user of cc-if-fullversion. Remove the macro as well. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: linux-kbuild@vger.kernel.org Link: https://lkml.kernel.org/r/1535348714-25457-1-git-send-email-yamada.masahiro@socionext.com
2018-08-29powerpc: disable support for relative ksymtab referencesArd Biesheuvel1-1/+0
The newly added code that emits ksymtab entries as pairs of 32-bit relative references interacts poorly with the way powerpc lays out its address space: when a module exports a per-CPU variable, the primary module region covering the ksymtab entry -and thus the 32-bit relative reference- is too far away from the actual per-CPU variable's base address (to which the per-CPU offsets are applied to obtain the respective address of each CPU's copy), resulting in corruption when the module loader attempts to resolve symbol references of modules that are loaded on top and link to the exported per-CPU symbol. So let's disable this feature on powerpc. Even though it implements CONFIG_RELOCATABLE, it does not implement CONFIG_RANDOMIZE_BASE and so KASLR kernels (which are the main target of the feature) do not exist on powerpc anyway. Reported-by: Andreas Schwab <schwab@linux-m68k.org> Suggested-by: Nicholas Piggin <nicholas.piggin@gmail.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-29drm/i915/audio: Hook up component bindings even if displays are disabledChris Wilson1-3/+0
If the display has been disabled by modparam, we still want to connect together the HW bits and bobs with the associated drivers so that we can continue to manage their runtime power gating. Fixes: 108109444ff6 ("drm/i915: Check num_pipes before initializing audio component") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Imre Deak <imre.deak@intel.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Elaine Wang <elaine.wang@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180817100241.4628-1-chris@chris-wilson.co.uk (cherry picked from commit 35a5fd9ebfa93758ca579e30f337b6c9126d995b) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-08-29drm/i915: Increase LSPCON timeoutFredrik Schön1-1/+1
100 ms is not enough time for the LSPCON adapter on Intel NUC devices to settle. This causes dropped display modes at boot or screen reconfiguration. Empirical testing can reproduce the error up to a timeout of 190 ms. Basic boot and stress testing at 200 ms has not (yet) failed. Increase timeout to 400 ms to get some margin of error. Changes from v1: The initial suggestion of 1000 ms was lowered due to concerns about delaying valid timeout cases. Update patch metadata. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107503 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1570392 Fixes: 357c0ae9198a ("drm/i915/lspcon: Wait for expected LSPCON mode to settle") Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: <stable@vger.kernel.org> # v4.11+ Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Fredrik Schön <fredrik.schon@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180817200728.8154-1-fredrik.schon@gmail.com (cherry picked from commit 59f1c8ab30d6f9042562949f42cbd3f3cf69de94) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-08-29drm/i915: Stop holding a ref to the ppgtt from each vmaChris Wilson1-4/+0
The context owns both the ppgtt and the vma within it, and our activity tracking on the context ensures that we do not release active ppgtt. As the context fulfils our obligations for active memory tracking, we can relinquish the reference from the vma. This fixes a silly transient refleak from closed vma being kept alive until the entire system was idle, keeping all vm alive as well. Reported-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Testcase: igt/gem_ctx_create/files Fixes: 3365e2268b6b ("drm/i915: Lazily unbind vma on close") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Tested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180816073448.19396-1-chris@chris-wilson.co.uk (cherry picked from commit a4417b7b419a68540ad7945ac4efbb39d19afa63) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-08-29arm64: defconfig: Enable TI's AM6 SoC platformNishanth Menon1-0/+3
Enable K3 SoC platform for TI's AM6 SoC. Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-08-29ARM: defconfig: Update the ARM Versatile defconfigLinus Walleij1-6/+8
This updates the ARM Versatile defconfig to the latest Kconfig structural changes and adds the DUMB VGA bridge driver so that VGA works out of the box, e.g. with QEMU. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-08-29dt-bindings: watchdog: renesas-wdt: Document r8a774a1 supportFabrizio Castro1-2/+3
RZ/G2M (R8A774A1) watchdog implementation is compatible with R-Car Gen3, therefore add relevant documentation. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-08-29cdrom: Fix info leak/OOB read in cdrom_ioctl_drive_statusScott Bauer1-1/+1
Like d88b6d04: "cdrom: information leak in cdrom_ioctl_media_changed()" There is another cast from unsigned long to int which causes a bounds check to fail with specially crafted input. The value is then used as an index in the slot array in cdrom_slot_status(). Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Scott Bauer <sbauer@plzdonthack.me> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-29of: add helper to lookup compatible child nodeJohan Hovold2-0/+33
Add of_get_compatible_child() helper that can be used to lookup compatible child nodes. Several drivers currently use of_find_compatible_node() to lookup child nodes while failing to notice that the of_find_ functions search the entire tree depth-first (from a given start node) and therefore can match unrelated nodes. The fact that these functions also drop a reference to the node they start searching from (e.g. the parent node) is typically also overlooked, something which can lead to use-after-free bugs. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2018-08-29arm/arm64: smccc-1.1: Make return values unsigned longMarc Zyngier1-10/+10
An unfortunate consequence of having a strong typing for the input values to the SMC call is that it also affects the type of the return values, limiting r0 to 32 bits and r{1,2,3} to whatever was passed as an input. Let's turn everything into "unsigned long", which satisfies the requirements of both architectures, and allows for the full range of return values. Reported-by: Julien Grall <julien.grall@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-08-29Documentation/arm64/sve: Couple of improvements and typosJulien Grall1-2/+2
- Fix mismatch between SVE registers (Z) and FPSIMD register (V) - Don't prefix the path for [3] with Linux to stay consistent with [1] and [2]. Signed-off-by: Julien Grall <julien.grall@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>