aboutsummaryrefslogtreecommitdiffstats
path: root/sound/oss/vwsnd.c (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2010-10-25Coda: replace BKL with mutexYoshihisa Abe4-50/+70
Replace the BKL with a mutex to protect the venus_comm structure which binds the mountpoint with the character device and holds the upcall queues. Signed-off-by: Yoshihisa Abe <yoshiabe@cs.cmu.edu> Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-25Coda: push BKL regions into coda_upcall()Yoshihisa Abe8-190/+96
Now that shared inode state is locked using the cii->c_lock, the BKL is only used to protect the upcall queues used to communicate with the userspace cache manager. The remaining state is all local and we can push the lock further down into coda_upcall(). Signed-off-by: Yoshihisa Abe <yoshiabe@cs.cmu.edu> Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-25Coda: add spin lock to protect accesses to struct coda_inode_info.Yoshihisa Abe7-17/+58
We mostly need it to protect cached user permissions. The c_flags field is advisory, reading the wrong value is harmless and in the worst case we hit a slow path where we have to make an extra upcall to the userspace cache manager when revalidating a dentry or inode. Signed-off-by: Yoshihisa Abe <yoshiabe@cs.cmu.edu> Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-25uwb: Orphan the UWB and WUSB subsystemsDavid Vrabel1-4/+2
I'm no longer in a position to be the maintainer for the Ultra-Wide Band (UWB) and Ceritified Wireless USB (WUSB) subsystems and no one else has volunteered to take over. Signed-off-by: David Vrabel <david.vrabel@csr.com>
2010-10-25uwb: Remove the WLP subsystem and driversDavid Vrabel22-8551/+1
The only Wimedia LLC Protocol (WLP) hardware was an Intel i1480 chip with a beta release of firmware that was never commercially available as a product. This hardware and firmware is no longer available as Intel sold their UWB/WLP IP. I also see little prospect of other WLP capable hardware ever being available. Signed-off-by: David Vrabel <david.vrabel@csr.com>
2010-10-25ALSA: hda - Disable sticky PCM stream assignment for AD codecsTakashi Iwai3-0/+11
The sticky PCM stream assignment introduced in 2.6.36 kernel seems causing problems on AD codecs. At some time later, the streaming no longer works by unknown reason. A simple workaround is to disable sticky-assignment for these codecs. Tested-by: Vasily Khoruzhick <anarsoul@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-24Input: wacom - specify Cinitq supported toolsPing Cheng1-12/+30
Cintiq, being a display tablet, doesn't have mouse and associated BTN_s. Make sure we do not specify them when registering Cintiq's input device so that userland can retrieve the exact tool set the device supports. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-24Input: ab8500-ponkey - fix IRQ freeing in error pathNicolas Kaiser1-1/+1
Looks like an obvious typo to me. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-25sh: i2c-sh7760: Replase from ctrl_* to __raw_*Nobuhiro Iwamatsu1-2/+2
ctrl_* is deprecated. We should to use __raw_*. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-24Revert "block: fix accounting bug on cross partition merges"Jens Axboe8-47/+13
This reverts commit 7681bfeeccff5efa9eb29bf09249a3c400b15327. Conflicts: include/linux/genhd.h It has numerous issues with the cleanup path and non-elevator devices. Revert it for now so we can come up with a clean version without rushing things. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-24i2c-viapro: Don't log nacksJean Delvare1-7/+1
Transactions not acked can happen every now and then, in particular during device detection, and various transaction types can be used for this purpose. So stop logging this event, except when debugging is enabled. This is what other similar drivers (e.g. i2c-i801 or i2c-piix4) do. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-24i2c/pca954x: Remove __devinit and __devexit from probe and remove functionsGuenter Roeck1-4/+4
The underlying I2C adapter may or may not be present when this driver gets initialized, and may disappear later, so there is no safe time at which the probe and remove functions can be discarded. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-24MAINTAINERS: Add maintainer for PCA9541 I2C bus master selector driverGuenter Roeck1-0/+6
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-24i2c/mux: Driver for PCA9541 I2C Master SelectorGuenter Roeck3-0/+422
This patch adds support for PCA9541, an I2C Bus Master Selector. The driver is modeled as single channel I2C Multiplexer to be able to utilize the I2C multiplexer framework. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Tom Grennan <tom.grennan@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org>
2010-10-24i2c: Optimize function i2c_detect()Jean Delvare1-7/+6
Check the class flags before allocating the temporary i2c_client structure, to avoid allocating it when we don't need it. Also optimize the inner loop a bit. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
2010-10-24i2c: Discard warning message on device instantiation from user-spaceJean Delvare1-2/+0
The "new_device" sysfs interface has been there for quite some time now, nobody complained about it so it must be good enough. Time to remove the warning and call it stable. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Michael Lawnick <ml.lawnick@gmx.de>
2010-10-24i2c-amd8111: Add proper error handlingJulia Lawall1-50/+113
The functions the functions amd_ec_wait_write and amd_ec_wait_read have an unsigned return type, but return a negative constant to indicate an error condition. A sematic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @exists@ identifier f; constant C; @@ unsigned f(...) { <+... * return -C; ...+> } // </smpl> Fixing amd_ec_wait_write and amd_ec_wait_read leads to the need to adjust the return type of the functions amd_ec_write and amd_ec_read, which are the only functions that call amd_ec_wait_write and amd_ec_wait_read. amd_ec_write and amd_ec_read, in turn, are only called from within the function amd8111_access, which already returns a signed typed value. Each of the calls to amd_ec_write and amd_ec_read are updated using the following semantic patch: // <smpl> @@ @@ + status = amd_ec_write - amd_ec_write (...); + if (status) return status; @@ @@ + status = amd_ec_read - amd_ec_read (...); + if (status) return status; // </smpl> The patch also adds the declaration of the status variable. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-24i2c: Change to new flag variablematt mooney4-12/+4
Replace EXTRA_CFLAGS with ccflags-y. Signed-off-by: matt mooney <mfm@muteddisk.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-24i2c: Remove unneeded inclusions of <linux/i2c-id.h>Jean Delvare10-10/+0
These drivers don't use anything which is defined in <linux/i2c-id.h>. This header file was never meant to be included directly anyway, and will be deleted soon. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Ben Dooks <ben-linux@fluff.org> Acked-by: Dave Airlie <airlied@linux.ie> Cc: Hans Verkuil <hverkuil@xs4all.nl>
2010-10-24i2c: Let i2c_parent_is_i2c_adapter return the parent adapterJean Delvare3-22/+32
This makes the calling site's code clearer IMHO. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Michael Lawnick <ml.lawnick@gmx.de>
2010-10-24i2c: Simplify i2c_parent_is_i2c_adapterJean Delvare1-1/+0
Only i2c devices can have their type set to i2c_adapter_type, so testing the bus type is redundant. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Michael Lawnick <ml.lawnick@gmx.de>
2010-10-24i2c-pca-platform: Change device name of request_irqNobuhiro Iwamatsu1-1/+1
i2c->adap.name shouldn't be used in request_irq. Instead the driver name "i2c-pca-platform" should be used. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: stable@kernel.org Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-24i2c: Fix Kconfig dependenciesJean Delvare2-1/+14
drivers/i2c/algos/Kconfig makes all the algorithms dependent on !I2C_HELPER_AUTO, which triggers a Kconfig warning about broken dependencies when some driver selects one of the algorithms. Ideally we would make only the prompts dependent on !I2C_HELPER_AUTO, however Kconfig doesn't currently support that. So we have to redefine the symbols separately for the I2C_HELPER_AUTO=y case. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Michal Marek <mmarek@suse.cz>
2010-10-24ALSA: usb - Creative USB X-Fi volume knob supportMandar Joshi1-0/+1
Adds an entry for Creative USB X-Fi to the rc_config array in mixer_quirks.c to allow use of volume knob on the device. The action of the volume knob is received by lirc when its using the alsa_usb driver. Signed-off-by: Mandar Joshi <emailmandar@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-24KVM: Drop CONFIG_DMAR dependency around kvm_iommu_map_pagesJan Kiszka1-2/+0
We also have to call kvm_iommu_map_pages for CONFIG_AMD_IOMMU. So drop the dependency on Intel IOMMU, kvm_iommu_map_pages will be a nop anyway if CONFIG_IOMMU_API is not defined. KVM-Stable-Tag. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: Fix signature of kvm_iommu_map_pages stubJan Kiszka1-2/+1
Breaks otherwise if CONFIG_IOMMU_API is not set. KVM-Stable-Tag. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: MCE: Send SRAR SIGBUS directlyHuang Ying1-8/+10
Originally, SRAR SIGBUS is sent to QEMU-KVM via touching the poisoned page. But commit 96054569190bdec375fe824e48ca1f4e3b53dd36 prevents the signal from being sent. So now the signal is sent via force_sig_info_fault directly. [marcelo: use send_sig_info instead] Reported-by: Dean Nelson <dnelson@redhat.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: MCE: Add MCG_SER_P into KVM_MCE_CAP_SUPPORTEDHuang Ying1-1/+1
Now we have MCG_SER_P (and corresponding SRAO/SRAR MCE) support in kernel and QEMU-KVM, the MCG_SER_P should be added into KVM_MCE_CAP_SUPPORTED to make all these code really works. Reported-by: Dean Nelson <dnelson@redhat.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: fix typo in copyright noticeNicolas Kaiser14-14/+14
Fix typo in copyright notice. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: Disable interrupts around get_kernel_ns()Avi Kivity1-0/+4
get_kernel_ns() wants preemption disabled. It doesn't make a lot of sense during the get/set ioctls (no way to make them non-racy) but the callee wants it. Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: MMU: Avoid sign extension in mmu_alloc_direct_roots() pae root addressAvi Kivity1-1/+1
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: MMU: move access code parsing to FNAME(walk_addr) functionXiao Guangrong1-24/+16
Move access code parsing from caller site to FNAME(walk_addr) function Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: MMU: audit: check whether have unsync sps after root syncXiao Guangrong2-3/+19
After root synced, all unsync sps are synced, this patch add a check to make sure it's no unsync sps in VCPU's page table Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: MMU: audit: introduce audit_printk to cleanup audit codeXiao Guangrong1-24/+18
Introduce audit_printk, and record audit point instead audit name Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: MMU: audit: unregister audit tracepoints before module unloadedXiao Guangrong1-9/+12
fix: Call Trace: [<ffffffffa01e46ba>] ? kvm_mmu_pte_write+0x229/0x911 [kvm] [<ffffffffa01c6ba9>] ? gfn_to_memslot+0x39/0xa0 [kvm] [<ffffffffa01c6c26>] ? mark_page_dirty+0x16/0x2e [kvm] [<ffffffffa01c6d6f>] ? kvm_write_guest_page+0x67/0x7f [kvm] [<ffffffff81066fbd>] ? local_clock+0x2a/0x3b [<ffffffffa01d52ce>] emulator_write_phys+0x46/0x54 [kvm] ...... Code: Bad RIP value. RIP [<ffffffffa0172056>] 0xffffffffa0172056 RSP <ffff880134f69a70> CR2: ffffffffa0172056 Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: MMU: audit: fix vcpu's spte walkingXiao Guangrong1-1/+1
After nested nested paging, it may using long mode to shadow 32/PAE paging guest, so this patch fix it Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: MMU: set access bit for direct mappingXiao Guangrong1-1/+2
Set access bit while setup up direct page table if it's nonpaing or npt enabled, it's good for CPU's speculate access Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: MMU: cleanup for error mask set while walk guest page tableXiao Guangrong1-10/+7
Small cleanup for set page fault error code Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: MMU: update 'root_hpa' out of loop in PAE shadow pathXiao Guangrong1-2/+2
The value of 'vcpu->arch.mmu.pae_root' is not modified, so we can update 'root_hpa' out of the loop. Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: x86 emulator: Eliminate compilation warning in x86_decode_insn()Sheng Yang1-1/+1
Eliminate: arch/x86/kvm/emulate.c:801: warning: ‘sv’ may be used uninitialized in this function on gcc 4.1.2 Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: x86: Fix constant type in kvm_get_time_scaleJan Kiszka1-3/+3
Older gcc versions complain about the improper type (for x86-32), 4.5 seems to fix this silently. However, we should better use the right type initially. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: VMX: Add AX to list of registers clobbered by guest switchJan Kiszka1-1/+1
By chance this caused no harm so far. We overwrite AX during switch to/from guest context, so we must declare this. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM guest: Move a printk that's using the clock before it's readyArjan Koers1-2/+4
Fix a hang during SMP kernel boot on KVM that showed up after commit 489fb490dbf8dab0249ad82b56688ae3842a79e8 (2.6.35) and 59aab522154a2f17b25335b63c1cf68a51fb6ae0 (2.6.34.1). The problem only occurs when CONFIG_PRINTK_TIME is set. KVM-Stable-Tag. Signed-off-by: Arjan Koers <0h61vkll2ly8@xutrox.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: x86: TSC catchup modeZachary Amsden2-21/+72
Negate the effects of AN TYM spell while kvm thread is preempted by tracking conversion factor to the highest TSC rate and catching the TSC up when it has fallen behind the kernel view of time. Note that once triggered, we don't turn off catchup mode. A slightly more clever version of this is possible, which only does catchup when TSC rate drops, and which specifically targets only CPUs with broken TSC, but since these all are considered unstable_tsc(), this patch covers all necessary cases. Signed-off-by: Zachary Amsden <zamsden@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: x86: Rename timer functionZachary Amsden2-7/+7
This just changes some names to better reflect the usage they will be given. Separated out to keep confusion to a minimum. Signed-off-by: Zachary Amsden <zamsden@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: x86: Make math work for other scalesZachary Amsden1-12/+18
The math in kvm_get_time_scale relies on the fact that NSEC_PER_SEC < 2^32. To use the same function to compute arbitrary time scales, we must extend the first reduction step to shrink the base rate to a 32-bit value, and possibly reduce the scaled rate into a 32-bit as well. Note we must take care to avoid an arithmetic overflow when scaling up the tps32 value (this could not happen with the fixed scaled value of NSEC_PER_SEC, but can happen with scaled rates above 2^31. Signed-off-by: Zachary Amsden <zamsden@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: cpu_relax() during spin waiting for rebootAvi Kivity1-1/+1
It doesn't really matter, but if we spin, we should spin in a more relaxed manner. This way, if something goes wrong at least it won't contribute to global warming. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: VMX: Respect interrupt window in big real modeAvi Kivity1-0/+9
If an interrupt is pending, we need to stop emulation so we can inject it. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: VMX: Emulated real mode interrupt injectionMohammed Gamal1-59/+6
Replace the inject-as-software-interrupt hack we currently have with emulated injection. Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: Add kvm_inject_realmode_interrupt() wrapperMohammed Gamal2-0/+30
This adds a wrapper function kvm_inject_realmode_interrupt() around the emulator function emulate_int_real() to allow real mode interrupt injection. [avi: initialize operand and address sizes before emulating interrupts] [avi: initialize rip for real mode interrupt injection] [avi: clear interrupt pending flag after emulating interrupt injection] Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.