aboutsummaryrefslogtreecommitdiffstats
path: root/sound/oss (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2007-12-21[Blackfin] arch: fix bug SDIO driver fails to build for BF542/BF548Cliff Cai2-4/+4
modified CMD_TIMEOUT and DAT_TIMEOUT to CMD_TIME_OUT and DAT_TIME_OUT Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-21[Blackfin] arch: Added support for 8250-class UARTs in HV Sistemas H8606 board, modification in 8250.c driver for correct compilation with BlackfinJavier Herrero1-2/+49
Signed-off-by: Javier Herrero <jherrero@hvsistemas.es> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-21[Blackfin] arch: Let the pre-processor do the math to save a few cycles - no functional changesRobin Getz1-3/+1
Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-21[Blackfin] arch: do not use fixed numbers to describe offsets - no functional changesRobin Getz1-1/+1
Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-21[Blackfin] arch: do not use hard coded addressesRobin Getz1-4/+4
Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-24[Blackfin] arch: fix bug gdb testing on hardware has regressionRobin Getz1-7/+30
http://blackfin.uclinux.org/gf/project/toolchain/tracker/?action=TrackerItemEdit&tracker_item_id=3651 As Bernd predicted, this was only necessary because of other problems in the kenel - fixing those, and this is not necessary, so remove it. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-27[Blackfin] arch: fix bug - trap_tests fails to recover on some tests.Robin Getz5-71/+99
http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3719 When the CPLBs get a miss, we do: - find a victim in the HW table - remove the victim - find the replacement in the software table - put it into the HW table. If we can't find a replacement in the software table, we accidently leave a duplicate in the HW table. This patch ensures that duplicate is marked as not valid. What we should do is find the replacement in the software table, before we find a victim in the HW table - but its too late in the release cycle to do that much restructuring of this code. Rather that duplicate code, connect Hardware Errors (irq5) into trap_c, so user space processes get killed properly. The rest of irq_panic() can be moved into traps.c (later) There is still a small corner case that causes problems when a pheriperal interrupt goes off a single cycle before a user space hardware error. This causes a kernel panic, rather than the user space process being killed. But, this checkin makes things work in 99.9% of the cases, and is a vast improvement from what is there today (which fails 100% of the time). Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-27[Blackfin] arch: Add a note describing what is going on - no functional changesRobin Getz1-2/+13
Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-27printk: revert ktime_get() timestampsIngo Molnar1-3/+1
revert 19ef9309273d26cb005cb23e6a370353dca91099. Kevin Winchester reported a lockup during X startup an bisected it to this commit. Reported-by: Kevin Winchester <kjwinchester@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-26ide: remove REQ_TYPE_ATA_CMDBartlomiej Zolnierkiewicz3-113/+11
Based on the earlier work by Tejun Heo. All users are gone so we can finally remove it. Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: switch ide_cmd_ioctl() to use REQ_TYPE_ATA_TASKFILE requestsBartlomiej Zolnierkiewicz2-34/+33
Based on the earlier work by Tejun Heo. There should be no functionality changes caused by this patch. Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: switch set_xfer_rate() to use REQ_TYPE_ATA_TASKFILE requestsBartlomiej Zolnierkiewicz3-12/+11
Based on the earlier work by Tejun Heo. Switch set_xfer_rate() to use REQ_TYPE_ATA_TASKFILE requests and make ide_wait_cmd() static. There should be no functionality changes caused by this patch. Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: fix final status check in drive_cmd_intr()Bartlomiej Zolnierkiewicz1-2/+2
Don't check for READY_STAT bit being set for PIO-in protocol (makes the final status check in drive_cmd_intr() match the one in task_in_intr()). Also fix function name reported by ide_error() call while at it. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: check BUSY and ERROR status bits before reading data in drive_cmd_intr()Bartlomiej Zolnierkiewicz1-3/+8
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: don't enable local IRQs for PIO-in in driver_cmd_intr() (take 2)Bartlomiej Zolnierkiewicz1-6/+9
Don't enable local IRQs for PIO-in protocol in driver_cmd_intr(). While at it: * Remove redundant rq->cmd_type check. * Read status register after enabling local IRQs for no-data protocol. v2: * Re-add DRQ=1 check lost in v1 (noticed by Sergei). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: convert "empty" REQ_TYPE_ATA_CMD requests to use REQ_TYPE_ATA_TASKFILEBartlomiej Zolnierkiewicz3-3/+5
Based on the previous work by Tejun Heo. There should be no functionality changes caused by this patch. Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: initialize rq->cmd_type in ide_init_drive_cmd() callersBartlomiej Zolnierkiewicz3-1/+7
* Initialize rq->cmd_type in ide_wait_cmd(), ide_cmd_ioctl() and set_pio_mode() (other callers were aleady over-riding rq->cmd_type). * Remove no longer needed rq->cmd_type setup from ide_init_drive_cmd(). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: use wait_drive_not_busy() in drive_cmd_intr() (take 2)Bartlomiej Zolnierkiewicz3-6/+5
Use wait_drive_not_busy() in drive_cmd_intr(). v2: * Fix wait_drive_not_busy() comment (noticed by Sergei). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: kill DATA_READY defineBartlomiej Zolnierkiewicz2-3/+2
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: task_end_request() fixTejun Heo3-14/+7
task_end_request() modified to always call ide_end_drive_cmd() for taskfile requests. Previously, ide_end_drive_cmd() was called only when IDE_TFLAG_FLAGGED was set. Also, ide_dma_intr() is modified to use task_end_request(). Enables TASKFILE ioctls to get valid register outputs on successful completion. Bart: - ported it over recent IDE changes Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: use rq->nr_sectors in task_end_request()Bartlomiej Zolnierkiewicz1-2/+2
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: remove needless ->cursg clearing from task_end_request()Bartlomiej Zolnierkiewicz1-2/+0
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: set IDE_TFLAG_IN_* flags before queuing/executing commandBartlomiej Zolnierkiewicz5-23/+26
* Add IDE_TFLAG_{HOB,TF,DEVICE} defines. * Set IDE_TFLAG_IN_* flags in {do_rw,ide_no_data,ide_raw}_taskfile() users. * Remove no longer needed ->tf_flags setup from ide_end_drive_cmd(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide-tape: fix handling of non-special requests in ->end_request methodBartlomiej Zolnierkiewicz1-0/+5
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: fix final status check in task_in_intr()Bartlomiej Zolnierkiewicz1-1/+1
Check for DRQ bit being cleared on the final status check. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: clear HOB bit for REQ_TYPE_ATA_CMD requests in ide_end_drive_cmd()Bartlomiej Zolnierkiewicz1-0/+2
ide_dump_status() may set HOB bit before ide_end_drive_cmd() is called. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: fix ->io_32bit race in ide_taskfile_ioctl()Tejun Heo2-5/+14
In ide_taskfile_ioctl(), there was a race condition involving drive->io_32bit. It was cleared and restored during ioctl requests but there was no synchronization with other requests. So, other requests could execute with the altered ->io_32bit setting or updated drive->io_32bit could be overwritten by ide_taskfile_ioctl(). This patch adds IDE_TFLAG_IO_16BIT flag to indicate to ide_pio_datablock() that 16-bit I/O is needed regardless of drive->io_32bit settting. Bart: - ported it over recent IDE changes Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26cmd64x: remove /proc/ide/cmd64xBartlomiej Zolnierkiewicz1-113/+1
This belongs to user-space (and only if really needed). text data bss dec hex filename 3874 180 28 4082 ff2 drivers/ide/pci/cmd64x.o.before 2231 180 0 2411 96b drivers/ide/pci/cmd64x.o.after Additionaly to being bloat the code reported incorrect UDMA modes for the reserved values of UDIDETCR0/1 registers. Also while at it remove unused CNTRL_DIS_RA0/1 defines. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: remove broken disk byte-swapping supportBartlomiej Zolnierkiewicz5-41/+3
Remove broken disk byte-swapping support: - it can cause a data corruption on SMP (or if using PREEMPT on UP) - all data coming from disk are byte-swapped by taskfile_*_data() which results in incorrect identify data being reported by /proc/ide/ and IOCTLs - "hdx=bswap/byteswap" kernel parameter has been broken on m68k host drivers (including Atari/Q40 ones) since 2.5.x days (because of 'hwif' zero-ing) - byte-swapping is limited to PIO transfers (for working with TiVo disks on x86 machines using user-space solutions or dm-byteswap should result in much better performance because DMA can be used) For previous discussions please see: http://www.ussg.iu.edu/hypermail/linux/kernel/0201.0/0768.html http://lkml.org/lkml/2004/2/28/111 [ I have dm-byteswap device mapper target if somebody is interested (patch is for 2.6.4 though but I'll dust it off if needed). ] Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: add ide_busy_sleep() helperBartlomiej Zolnierkiewicz1-22/+21
Add ide_busy_sleep() helper and use it in do_probe(), enable_nest() and probe_hwif(). As a nice side-effect this fixes a minor bug in do_probe() (the code was reading status register without any delay). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: make CONFIG_IDEPCI_PCIBUS_ORDER visible and deprecate itBartlomiej Zolnierkiewicz1-1/+13
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: move CONFIG_IDEPCI_PCIBUS_ORDER code to ide-scan-pci.cBartlomiej Zolnierkiewicz2-103/+110
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: print banner message once per controller in m68k host driversBartlomiej Zolnierkiewicz5-35/+22
* Print banner message once per controller in m68k host drivers. * Change printk() level to KERN_INFO in buddha, falconide and gayle. * Add banner message to q40ide. This is basically a preparation for the future IDE layer changes. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: add ide_set_irq() inline helperBartlomiej Zolnierkiewicz5-22/+17
There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide-pmac: use custom hwif->sg_max_nents only if DMA support is enabledBartlomiej Zolnierkiewicz1-2/+2
Move setting hwif->sg_max_nents from pmac_ide_setup_device() to pmac_ide_setup_dma(). Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26rapide: remove write-only hwif->hwif_dataBartlomiej Zolnierkiewicz1-2/+0
Cc: Russell King <rmk@arm.linux.org.uk> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: use ide_init_port_hw() in setup-pci.cBartlomiej Zolnierkiewicz1-16/+17
* Move setting hwif->gendev.parent from ide_pci_setup_ports() to ide_hwif_configure(). * Always set hwif->io_ports in ide_hwif_configure(). * Use ide_init_port_hw() in ide_hwif_configure(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: always use ide_std_init_ports() in setup-pci.cBartlomiej Zolnierkiewicz1-5/+1
* ide_init_hwif_ports() call in setup-pci.c::ide_hwif_configure() doesn't depend on the default cotrol register offset, default IRQ or ppc_ide_md.ide_init_hwif implementations so ide_std_init_ports() can always be used. * Since 'base' is always non-zero and thus hwif->io_ports[IDE_DATA_OFFSET] is also non-zero always clear hwif->noprobe. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26au1xxx-ide: use ide_init_port_hw()Bartlomiej Zolnierkiewicz1-4/+4
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26au1xxx-ide: au_ide_probe() fixesBartlomiej Zolnierkiewicz1-3/+2
* hwif->hold is always set in au_ide_probe() (few lines earlier), no need to set it again * hwif->{channel,select_data,config_data} should be always zero * autotune PIO also if CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA is defined Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: make remaining built-in only IDE host drivers modular (take 2)Bartlomiej Zolnierkiewicz30-221/+171
* Make remaining built-in only IDE host drivers modular, add ide-scan-pci.c file for probing PCI host drivers registered with IDE core (special case for built-in IDE and CONFIG_IDEPCI_PCIBUS_ORDER=y) and then take care of the ordering in which all IDE host drivers are probed when IDE is built-in during link time. * Move probing of gayle, falconide, macide, q40ide and buddha (m68k arch specific) host drivers, before PCI ones (no PCI on m68k), ide-cris (cris arch specific), cmd640 (x86 arch specific) and pmac (ppc arch specific). * Move probing of ide-cris (cris arch specific) host driver before cmd640 (x86 arch specific). * Move probing of mpc8xx (ppc specific) host driver before ide-pnp (depends on ISA and none of ppc platform that use mpc8xx supports ISA) and ide-h8300 (h8300 arch specific). * Add "probe_vlb" kernel parameter to cmd640 host driver and update Documentation/ide.txt accordingly. * Make IDE_ARM config option visible so it can also be disabled if needed. * Remove bogus comment from ide.c while at it. v2: * Fix two issues spotted by Sergei: - replace ENOMEM error value by ENOENT in ide-h8300 host driver - fix MODULE_PARM_DESC() in cmd640 host driver Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: fix host drivers depending on ide_generic to probe for interfaces (take 2)Bartlomiej Zolnierkiewicz13-16/+70
* Add mpc8xx_ide_probe() to mpc8xx.c and call it from probe_for_hwifs(). * Convert ide_arm, ide-cris, ide-h8300, ide-pnp, buddha, falconide, gayle, macide, q40ide, cmd640 and mpc8xx host drivers to use ide_device_add(). This removes dependency on ide_generic for these drivers so update ide/Kconfig accordingly. v2: * ide_arm build fix (s/ide_device_idx/ide_device_add/) (Thanks to Christoph Lameter <clameter@sgi.com> for reporting the problem). Cc: Mikael Starvik <starvik@axis.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26cmd640: fix dependency on IDE_GENERICBartlomiej Zolnierkiewicz1-0/+1
Make BLK_DEV_CMD640 select IDE_GENERIC. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: move ide_arm_init() call from init_ide_data() to ide_init()Bartlomiej Zolnierkiewicz2-4/+3
* Remove ide_init_port_data() call from ide_arm_init() and move ide_arm_init() call from init_ide_data() to ide_init(). This patch is a preparation for the future changes (and as a side-effect makes obsolete "idex=io[,ctl[,irq]]" kernel parameters work for ide_arm). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: drop 'initializing' argument from ide_register_hw()Bartlomiej Zolnierkiewicz15-67/+86
* Rename init_hwif_data() to ide_init_port_data() and export it. * For all users of ide_register_hw() with 'initializing' argument set hwif->present and hwif->hold are always zero so convert these host drivers to use ide_find_port()+ide_init_port_data()+ide_init_port_hw() instead (also no need for init_hwif_default() call since the setup done by it gets over-ridden by ide_init_port_hw() call). * Drop 'initializing' argument from ide_register_hw(). Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: add ide_init_port_hw() helperBartlomiej Zolnierkiewicz6-66/+81
* Add ide_init_port_hw() helper. * rapide.c: convert rapide_locate_hwif() to rapide_setup_ports() and use ide_init_port_hw(). * ide_platform.c: convert plat_ide_locate_hwif() to plat_ide_setup_ports() and use ide_init_port_hw(). * sgiioc4.c: use ide_init_port_hw(). * pmac.c: add 'hw_regs_t *hw' argument to pmac_ide_setup_device(), setup 'hw' in pmac_ide_{macio,pci}_attach() and use ide_init_port_hw() in pmac_ide_setup_device(). This patch is a preparation for the future changes in the IDE probing code. There should be no functionality changes caused by this patch. Cc: Russell King <rmk@arm.linux.org.uk> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Jeremy Higdon <jeremy@sgi.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26sgiioc4: always init hwif->io_portsBartlomiej Zolnierkiewicz1-9/+6
'if (hwif->io_ports[IDE_DATA_OFFSET] != cmd_base)' is always true. Cc: Jeremy Higdon <jeremy@sgi.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: Fix build break caused by "ide: remove ideprobe_init()"Olof Johansson2-2/+2
Fix build break of powerpc holly_defconfig: In file included from arch/powerpc/platforms/embedded6xx/holly.c:24: include/linux/ide.h:1206: error: 'CONFIG_IDE_MAX_HWIFS' undeclared here (not in a function) There's no need to have a sized array in the prototype, might as well turn it into a pointer. It could probably be argued that large parts of the include file can be covered under #ifdef CONFIG_IDE, but that's a larger undertaking. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: remove ideprobe_init()Bartlomiej Zolnierkiewicz3-41/+24
* Rename ide_device_add() to ide_device_add_all() and make it accept 'u8 idx[MAX_HWIFS]' instead of 'u8 idx[4]' as an argument. * Add ide_device_add() wrapper for ide_device_add_all(). * Convert ide_generic_init() to use ide_device_add_all(). * Remove no longer needed ideprobe_init(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: add hwif->chipset fixup to ide_device_add()Bartlomiej Zolnierkiewicz1-1/+5
Add hwif->chipset fixup identical to the one in ideprobe_init() to ide_device_add(). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.