aboutsummaryrefslogtreecommitdiffstats
path: root/sound/pci/oxygen/oxygen_lib.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2008-05-19[ALSA] oxygen: add PM supportClemens Ladisch1-0/+100
Add suspend/resume support. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-19[ALSA] oxygen: add symbol for I/O space sizeClemens Ladisch1-2/+2
Remove another magic number - add a symbol for the size of the PCI I/O range. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-19[ALSA] oxygen: fix version in MODULE_LICENSEClemens Ladisch1-1/+1
Adjust the MODULE_LICENSE strings to properly reflect the actual license. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-04-24[ALSA] Fix synchronize_irq() bugs, redundanciesJeff Garzik1-3/+1
free_irq() calls synchronize_irq() for you, so there is no need for drivers to manually do the same thing (again). Thus, calls where sync-irq immediately precedes free-irq can be simplified. However, during this audit several bugs were noticed, where free-irq is preceded by a "irq >= 0" check... but the sync-irq call is not covered by the same check. So, where sync-irq could not be eliminated completely, the missing check was added. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] oxygen: mute by defaultClemens Ladisch1-1/+2
Initialize the playback volume controls as being muted and having minimal volume. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] oxygen: generalize handling of DAC volume limitsClemens Ladisch1-1/+1
Add fields for the DAC volume limits to the module structure so that model drivers do not need to install their own control info handlers. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] oxygen: use SPDIF input only if presentClemens Ladisch1-18/+31
If the card model does not have a digital input or an AC97 codec, disable the respective interrupt and mixer controls. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] oxygen: fix line-in recording selection (now for real)Clemens Ladisch1-0/+2
On C-Media cards, the GPIO pin 0 of the CM9780 must be handled exactly like on Xonar cards, so move the Xonar code to the common mixer code. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] oxygen: disable clock of unused I2S inputsClemens Ladisch1-11/+18
Disable the master clock outputs of any unused I2S inputs. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] oxygen: move MIDI flag to model structClemens Ladisch1-6/+6
Put the flag that enables the MIDI port into the model structure instead of passing it as a separate parameter to oxygen_pci_probe(). Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] oxygen: make SPI/2-wire configuration model-specificClemens Ladisch1-5/+5
Allow the model drivers to specify if the codec communication goes over SPI or a 2-wire bus. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] oxygen: add monitor controlsClemens Ladisch1-8/+8
Add controls to enable monitoring of the analog and digital inputs. To allow monitoring after loading the driver when nothing has been played back or recorded yet, the I2S input and outputs are initialized to a valid configuration. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-02-22[ALSA] oxygen - Fix section mismatchTakashi Iwai1-5/+5
Removed invalid __devinit and __devexit that are remaining after split to a helper module. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-31[ALSA] virtuoso: monitor external power on D2XClemens Ladisch1-1/+10
On the Xonar D2X, monitor the GPIO pin that indicates whether external power is present. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: add front panel controlsClemens Ladisch1-2/+1
Add mixer controls for the front panel AC97 codec. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: use AC97 interruptClemens Ladisch1-3/+10
After an AC97 register read or write, use the AC97 interrupt instead of polling to wait for the access to be completed. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: make line-in exclusive only on XonarClemens Ladisch1-2/+0
Move the line input switching code to the Virtuoso driver because only the Xonar cards bypass the analog mixer for line input. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: more initializationClemens Ladisch1-18/+58
Initialize more registers of the controller and the second AC97 codec. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: add 192 kHz SPDIF input supportClemens Ladisch1-20/+55
Change the oxygen_spdif_input_bits_changed() function so that clock changes on the SPDIF input are correctly detected. This means that sample rates greater than 96 kHz are now supported. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: move model-specific data out of common headerClemens Ladisch1-1/+3
Instead of having model-specific fields in the common struct oxygen, put them into a private structure that is allocated together with the card structure. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: add more symbolsClemens Ladisch1-4/+12
Add symbol definitions for the various codecs and GPIO pins. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: remove MIDI autodetectionClemens Ladisch1-2/+4
The MIDI bit in the MISC register is set by default and cannot be used to detect the presence of a MIDI port. Instead, add a parameter to the oxygen_pci_probe() function so that model drivers can specify this. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: remove magic numbersClemens Ladisch1-9/+33
Replace some magic numbers with register symbols. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: fix playback routingClemens Ladisch1-1/+1
The default playback routing must be 0xe4, not 0xe1; the front and surround DACs were exchanged. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: add register definitionsClemens Ladisch1-18/+31
Add more symbols for registers and register fields. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: make SPI configuration configurableClemens Ladisch1-1/+1
Add a field to the model structure so that it is possible to have a card where the SPI outputs 4 and 5 are used for an EEPROM. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: make AC97 codec optionalClemens Ladisch1-32/+50
Only initialize and create mixer controls for the first AC97 codec when one has actually been detected. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: use an array of snd_kcontrol pointersClemens Ladisch1-2/+2
Use an array for the pointers to known controls so that it is easier to add more. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: fix channel routingClemens Ladisch1-1/+1
Do not exchange the surround and back jacks except when in 7.1 mode where the surround jack is not rear but side. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] Remove sound/driver.hTakashi Iwai1-1/+0
This header file exists only for some hacks to adapt alsa-driver tree. It's useless for building in the kernel. Let's move a few lines in it to sound/core.h and remove it. With this patch, sound/driver.h isn't removed but has just a single compile warning to include it. This should be really killed in future. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] add CMI8788 driverClemens Ladisch1-0/+361
Add the snd-oxygen driver for the C-Media CMI8788 (Oxygen) chip, used on the Asound A-8788, AuzenTech X-Meridian, Bgears b-Enspirer, Club3D Theatron DTS, HT-Omega Claro, Razer Barracuda AC-1, Sondigo Inferno, and TempoTec HIFIER sound cards. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.