aboutsummaryrefslogtreecommitdiffstats
path: root/sound/pci/via82xx.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2012-04-24ALSA: pci: clean up using module_pci_driver()Takashi Iwai1-13/+2
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-12-19ALSA: module_param: make bool parameters really boolRusty Russell1-2/+2
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-31sound: fix drivers needing module.h not moduleparam.hPaul Gortmaker1-1/+1
The implicit presence of module.h lured several users into incorrectly thinking that they only needed/used modparam.h but once we clean up the module.h presence, these will show up as build failures, so fix 'em now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-20ALSA: via82xx: allow to disable the SRCClemens Ladisch1-0/+8
Add the PCM rule to allow disabling the PCM playback SRC. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-14ALSA: mpu401: clean up interrupt specificationClemens Ladisch1-2/+3
The semantics of snd_mpu401_uart_new()'s interrupt parameters are somewhat counterintuitive: To prevent the function from allocating its own interrupt, either the irq number must be invalid, or the irq_flags parameter must be zero. At the same time, the irq parameter being invalid specifies that the mpu401 code has to work without an interrupt allocated by the caller. This implies that, if there is an interrupt and it is allocated by the caller, the irq parameter must be set to a valid-looking number which then isn't actually used. With the removal of IRQF_DISABLED, zero becomes a valid irq_flags value, which forces us to handle the parameters differently. This patch introduces a new flag MPU401_INFO_IRQ_HOOK for when the device interrupt is handled by the caller, and makes the allocation of the interrupt to depend only on the irq parameter. As suggested by Takashi, the irq_flags parameter was dropped because, when used, it had the constant value IRQF_DISABLED. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-10ALSA: use KBUILD_MODNAME for request_irq argument in sound/pci/*Takashi Iwai1-1/+1
The name argument of request_irq() appears in /proc/interrupts, and it's quite ugly when the name entry contains a space or special letters. In general, it's simpler and more readable when the module name appears there, so let's replace all entries with KBUILD_MODNAME. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-10ALSA: Use KBUILD_MODNAME for pci_driver.name entriesTakashi Iwai1-1/+1
The convention for pci_driver.name entry in kernel drivers seem to be the module name or equivalent ones. But, so far, almost all PCI sound drivers use more verbose name like "ABC Xyz (12)", and these are fairly confusing when appearing as a file name. This patch converts the all pci_driver.name entries in sound/pci/* to use KBUILD_MODNAME for more unified appearance. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-12ALSA: via82xx: allow changing the initial DXS volumeClemens Ladisch1-2/+7
As per-stream volume controls, the DXS controls are not intended to adjust the overall sound level and so are initialized every time a stream is opened. However, there are special situations where one wants to reduce the overall volume in the digital domain, i.e., before the AC'97 codec's PCM volume control. To allow this, add a module parameter that sets the initial DXS volume. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Tested-by: Soeren D. Schulze <soeren.d.schulze@gmx.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-01Merge branch 'topic/misc' into for-linusTakashi Iwai1-1/+1
2010-02-22ALSA: via82xx: add quirk for D1289 motherboardClemens Ladisch1-0/+6
Add a headphones-only quirk for the Fujitsu Siemens D1289. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Reported-and-tested-by: Marc Haber <mh+alsa201002@zugschlus.de> Cc: <stable@kernel.org> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-02-09sound: use DEFINE_PCI_DEVICE_TABLEAlexey Dobriyan1-1/+1
Use DEFINE_PCI_DEVICE_TABLE() to make PCI device ids go to .devinit.rodata section, so they can be discarded in some cases, and make them const. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-30sound: via82xx: deactivate DXS controls of inactive streamsClemens Ladisch1-7/+52
Activate the DXS volume controls only when the corresponding stream is being used. This makes the behaviour consistent with the other drivers that have per-stream volume controls. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-06sound: via82xx: move DXS volume controls to PCM interfaceClemens Ladisch1-9/+18
The "VIA DXS" controls are actually volume controls that apply to the four PCM substreams, so we better indicate this connection by moving the controls to the PCM interface. Commit b452e08e73c0e3dbb0be82130217be4b7084299e in 2.6.30 broke the restoring of these volumes by "alsactl restore" that most distributions use; the renaming in this patch cures that regression by preventing alsactl from applying the old, wrong volume levels to the new controls. http://bugzilla.kernel.org/show_bug.cgi?id=14151 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=532613 Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-25sound: Use PCI_VDEVICEJoe Perches1-2/+2
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-22ALSA: via82xx: add option to disable 500ms delay in snd_via82xx_codec_waitSimon Arlott1-1/+5
There's a large 500ms delay in snd_via82xx_codec_wait() that, at least on my hardware, appears to be unnecessary. The rest of the init of the card works without logging any warnings or errors and both audio and mixer settings work. This adds an "nodelay" parameter to disable this (undocumented in the code) large delay improving bootup time by 489-500ms. [ 1.034217] initcall alsa_card_via82xx_init+0x0/0x16 returned 0 after 505757 usecs vs. [ 0.533136] initcall alsa_card_via82xx_init+0x0/0x16 returned 0 after 15915 usecs Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-05sound: via82xx: fix DXS volume rangeClemens Ladisch1-1/+1
With 5 bits and 1.5 dB per step, the DXS volume range is only 48 dB. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-24Merge branch 'topic/misc' into for-linusTakashi Iwai1-10/+13
2009-02-09ALSA: via82xx - Clean up quirk listTakashi Iwai1-9/+9
Use SND_PCI_QUIRK_VENDOR() macro. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-05ALSA: Fix missing KERN_* prefix to printk in sound/pciTakashi Iwai1-1/+4
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-12ALSA: Convert to snd_card_create() in sound/pci/*Takashi Iwai1-3/+3
Convert from snd_card_new() to the new snd_card_create() function in sound/pci/*. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-08-25ALSA: via82xx - check continuous pages in buffer setupTakashi Iwai1-10/+9
Check continuous pages in the buffer set up so that the number of BDL is reduced. Also increased the max buffer size. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25ALSA: via82xx - ignore buffer preallocation errorsTakashi Iwai1-23/+15
The errors at buffer preallocations aren't fatal and safe to ignore. The buffer will be allocated dynamically when opened. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25ALSA: Clean up SG-buffer helper functions and macrosTakashi Iwai1-2/+3
Clean up SG-buffer helper functions and macros. Helpers take substream as arguments now. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-13ALSA: Kill snd_assert() in sound/pci/*Takashi Iwai1-3/+5
Kill snd_assert() in sound/pci/*, either removed or replaced with if () with snd_BUG_ON(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-10ALSA: via82xx - Add VIA audio device #1841 to ac97_quirk listWalter Sheets1-0/+6
Signed-off-by: Walter Sheets <w41ter@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-04-24[ALSA] Fix synchronize_irq() bugs, redundanciesJeff Garzik1-1/+1
free_irq() calls synchronize_irq() for you, so there is no need for drivers to manually do the same thing (again). Thus, calls where sync-irq immediately precedes free-irq can be simplified. However, during this audit several bugs were noticed, where free-irq is preceded by a "irq >= 0" check... but the sync-irq call is not covered by the same check. So, where sync-irq could not be eliminated completely, the missing check was added. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-01-31[ALSA] Remove sound/driver.hTakashi Iwai1-1/+0
This header file exists only for some hacks to adapt alsa-driver tree. It's useless for building in the kernel. Let's move a few lines in it to sound/core.h and remove it. With this patch, sound/driver.h isn't removed but has just a single compile warning to include it. This should be really killed in future. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] via82xx: minor optimization in snd_via82xx_freeMarcin Ślusarz1-1/+1
via82xx: minor optimization in snd_via82xx_free don't check X, when we just checked !X before goto Signed-off-by: Marcin Ślusarz <marcin.slusarz@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] via82xx - Fix quirk for Shuttle AK32VNTakashi Iwai1-2/+8
Fix quirk for Shuttle AK32VN. It works better with DXS_SRC, and needs HP_ONLY ac97 quirk. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16[ALSA] Changed Jaroslav Kysela's e-mail from perex@suse.cz to perex@perex.czJaroslav Kysela1-2/+2
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16[ALSA] via82xx - Add DXS quirk for Shuttle AK31v2Takashi Iwai1-0/+1
Shuttle AK31v2 works well with dxs_support=5 (ALSA bug#2926). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] alsa-kernel: schedule_timeout() fixesRene Herman1-2/+2
Fix schedule_timeout() use in alsa-kernel. Mostly just schedule_timeout(1) --> schedule_timeout_uninterruptible(1) The wavefront_synth one fixes the surrounding loop as well. In ymfpci_main, delete a superfluous set_current_state() and in soc/soc-dapm.c replace an _interruptible with _uninterruptible in some debug code; it's not waiting for signals. Signed-off-by: Rene Herman <rene.herman> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] Clean up with common snd_ctl_boolean_*_info callbacksTakashi Iwai1-9/+1
Clean up codes using the new common snd_ctl_boolean_*_info() callbacks. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-07-20[ALSA] Fix invalid schedule_timeout_interruptible()Takashi Iwai1-2/+2
Fixed the invalid use of schedule_timeout_interruptible() without checking pending signals. Simply replaced with schedule_timeout(). Suggestions thanks to Jeff Garzik. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-07-11PCI: Change all drivers to use pci_device->revisionAuke Kok1-8/+6
Instead of all drivers reading pci config space to get the revision ID, they can now use the pci_device->revision member. This exposes some issues where drivers where reading a word or a dword for the revision number, and adding useless error-handling around the read. Some drivers even just read it for no purpose of all. In devices where the revision ID is being copied over and used in what appears to be the equivalent of hotpath, I have left the copy code and the cached copy as not to influence the driver's performance. Compile tested with make all{yes,mod}config on x86_64 and i386. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-09[ALSA] Add even more 'const' to everything related to TLVTakashi Iwai1-1/+1
Mark TLV data as 'const' Signed-of-by: Philipp Matthias Hahn <pmhahn@pmhahn.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09[ALSA] via82xx - Use quirk list helper functionTakashi Iwai1-82/+48
Clean up dxs_support quirk list using snd_pci_quirk_lookup(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09[ALSA] ac97 - Suppress power-saving mode on non-supporting driversTakashi Iwai1-1/+1
Don't enable power-saving mode on drivers that don't support it. The supporting drivers set AC97_SCAP_POWER_SAVE to scaps at creation of ac97 instance. Currently enable on the following drivers: intel8x0, intel8x0m, atiixp, atiixp-modem, via82xx and via82xx-modem. Also, a bit clean up of power-saving stuff: - Don't create an own workq - Remove superfluous ifdefs Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-12-20[ALSA] Remove IRQF_DISABLED for shared PCI irqsTakashi Iwai1-1/+1
Fix IRQ flags for PCI devices. The shared IRQs for PCI devices shouldn't be allocated with IRQF_DISABLED. Also, when MSI is enabled, IRQF_SHARED shouldn't be used. The patch removes unnecessary cast in request_irq and free_irq, too. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-12-20[ALSA] via82xx: add __devinitdataAndreas Mohr1-2/+2
add __devinitdata to struct whitelist, since it's used within a __devinit function. Add const attribute to iterator variable, too. Compile-tested (no section warnings etc.) and run-tested on vt8233, 2.6.18-mm3 (hopefully applies well to current ALSA). Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-10-22[ALSA] Various fixes for suspend/resume of ALSA PCI driversTakashi Iwai1-3/+9
- Check the return value of pci_enable_device() and request_irq() in the suspend. If any error occurs there, disable the device using snd_card_disconnect(). - Call pci_set_power_state() properly with pci_choose_state(). - Fix the order to call pci_set_power_state(). - Removed obsolete house-made PM codes in some drivers. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells1-3/+3
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-09-23[ALSA] Added TLV support to VIA82xx driverTakashi Iwai1-0/+9
Added the TLV support to VIA82xx driver for addition of dB range information. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] via82xx - Add dxs_support entry for a FSC machineTakashi Iwai1-0/+1
Added dxs_support=5 entry for a FSC machine. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] Add experimental support of aggressive AC97 power-saving modeTakashi Iwai1-1/+12
Added CONFIG_SND_AC97_POWER_SAVE kernel config to enable the support of aggressive AC97 power-saving mode. In this mode, the AC97 powerdown register bits are dynamically controlled at each open/close of PCM streams. The mode is activated via power_save option for snd-ac97-codec driver. As default it's off. It can be turned on/off on the fly via sysfs, too. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-07-12[ALSA] Fix section mismatch errors in ALSA PCI driversTakashi Iwai1-1/+1
Fixed 'section mismatch' errors in ALSA PCI drivers: - removed invalid __devinitdata from pci id tables - fix/remove __devinit of functions called in suspend/resume Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-07-02[PATCH] irq-flags: sound: Use the new IRQF_ constantsThomas Gleixner1-1/+1
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-22[ALSA] via82xx - Default to variable samplerate enabled for MSI K8T Neo2-FIKarsten Wiese1-1/+1
Default to variable samplerate enabled for MSI K8T Neo2-FI No crackles here with 44100. Signed-off-by: Karsten Wiese <annabellesgarden@yahoo.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-06-22[ALSA] Add hp_only quirk for pci id [161f:2032] to via82xxDaniel T Chen1-0/+6
http://www.kernel.org/git/?p=linux/kernel/git/bcollins/ubuntu-dapper.git;a=commitdiff;h=eae2cc78de39502595f67b7fc1f821f5963bb8ae UpstreamStatus: Not merged Christian Bjalevik reports in LP#38546 that his sound chipset requires the 'hp_only' quirk to allow him to control sound volume correctly when headphones are inserted. This patch adds the appropriate pci id to the via82xx ALSA driver so that the quirk is applied automatically, thereby removing the need for users to modify /etc/modprobe.d/alsa-base (or to unload and reload snd-via82xx with ac97_quirk=hp_only). This patch closes LP#38546. Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Ben Collins <bcollins@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-06-22[ALSA] Change an arugment of snd_mpu401_uart_new() to bit flagsTakashi Iwai1-1/+1
Change the 5th argument of snd_mpu401_uart_new() to bit flags instead of a boolean. The argument takes bits that consist of MPU401_INFO_XXX flags. The callers that used the value 1 there are replaced with MPU401_INFO_INTEGRATED. Signed-off-by: Takashi Iwai <tiwai@suse.de>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.