aboutsummaryrefslogtreecommitdiffstats
path: root/sound/pci (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-10-29ALSA: ca0106: Disable IZD on SB0570 DAC to fix audio popsAlex Stanoev1-1/+1
The Creative Audigy SE (SB0570) card currently exhibits an audible pop whenever playback is stopped or resumed, or during silent periods of an audio stream. Initialise the IZD bit to the 0 to eliminate these pops. The Infinite Zero Detection (IZD) feature on the DAC causes the output to be shunted to Vcap after 2048 samples of silence. This discharges the AC coupling capacitor through the output and causes the aforementioned pop/click noise. The behaviour of the IZD bit is described on page 15 of the WM8768GEDS datasheet: "With IZD=1, applying MUTE for 1024 consecutive input samples will cause all outputs to be connected directly to VCAP. This also happens if 2048 consecutive zero input samples are applied to all 6 channels, and IZD=0. It will be removed as soon as any channel receives a non-zero input". I believe the second sentence might be referring to IZD=1 instead of IZD=0 given the observed behaviour of the card. This change should make the DAC initialisation consistent with Creative's Windows driver, as this popping persists when initialising the card in Linux and soft rebooting into Windows, but is not present on a cold boot to Windows. Signed-off-by: Alex Stanoev <alex@astanoev.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-22Merge tag 'asoc-v5.0' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linusTakashi Iwai2-0/+13
ASoC: Updates for v5.0/v4.20 As ever there's a lot of small and driver specific changes going on here, but we do also have some relatively large changes in the core thanks to the hard work of Charles and Morimoto-san: - More component transitions from Morimoto-san, I think we're about finished with this. Thanks for all the hard work! - Morimoto-san also added a bunch of for_each_foo macros - A bunch of cleanups and fixes for DAPM from Charles. - MCLK support for several different devices, including CS42L51, STM32 SAI, and MAX98373. - Support for Allwinner A64 CODEC analog, Intel boards with DA7219 and MAX98927, Meson AXG PDM inputs, Nuvoton NAU8822, Renesas R8A7744 and TI PCM3060.
2018-10-22ALSA: hda/ca0132 - Actually fix microphone issueConnor McAdams1-36/+37
This patch fixes the microphone issue for all cards. The previous fix worked on the ZxR, but not on the AE-5 or Z. This patch has been tested to work for all cards. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-21Merge branch 'asoc-4.20' into asoc-nextMark Brown25-558/+37
2018-10-16ALSA: hda: Add 2 more models to the power_save blacklistHans de Goede1-0/+4
Power-saving is causing plops on audio start/stop on Dell Precision T3600 laptops and Intel DZ77BH boards, add these to the power_save blacklist. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1525104 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-14ALSA: asihpi: don't pass GFP_DMA32 to dma_alloc_coherentChristoph Hellwig1-1/+1
The DMA API does its own zone decisions based on the coherent_dma_mask. [ Note: as the driver doesn't set the DMA coherent mask, we can assume the default 32bit DMA, hence it should be safe to drop the flag here -- tiwai ] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-12ALSA: au88xx: Add fall-through annotationsTakashi Iwai1-0/+6
As a preparatory patch for the upcoming -Wimplicit-fallthrough compiler checks, add the "fall through" annotation in au88xx driver. Although the usages in both both functions vortex_adbdma_setbuffers() and vortex_wtdma_setbuffers() look a bit suspicious, we keep the behavior as before, just to be safer. If it were broken, we should have already received bug reports. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-12ALSA: hda - Add mic quirk for the Lenovo G50-30 (17aa:3905)Jeremy Cline1-0/+1
The Lenovo G50-30, like other G50 models, has a Conexant codec that requires a quirk for its inverted stereo dmic. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1249364 Reported-by: Alexander Ploumistos <alex.ploumistos@gmail.com> Tested-by: Alexander Ploumistos <alex.ploumistos@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Jeremy Cline <jcline@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-10ALSA: hda/realtek - Fix the problem of the front MIC on the Lenovo M715Hui Wang1-0/+6
The front MIC on the Lenovo M715 can't record sound, after applying the ALC294_FIXUP_LENOVO_MIC_LOCATION, the problem is fixed. So add the pin configuration of this machine to the pin quirk table. Cc: <stable@vger.kernel.org> Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-09ALSA: hda - Fix headphone pin config for ASUS G751Takashi Iwai1-1/+11
BIOS on ASUS G751 doesn't seem to map the headphone pin (NID 0x16) correctly. Add a quirk to address it, as well as chaining to the previous fix for the microphone. Reported-by: Håvard <hovardslill@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-09ALSA: hda/ca0132 - Fix input effect controls for desktop cardsConnor McAdams1-4/+4
This patch removes the echo cancellation control for desktop cards, and makes use of the special 0x47 SCP command for noise reduction. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-09ALSA: hda/ca0132 - Add error checking in ca0132_build_controls()Connor McAdams1-12/+35
This patch adds error checking to functions creating controls inside of ca0132_build_controls(). Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-09ALSA: hda/ca0132 - Clean up patch_ca0132()Connor McAdams1-5/+9
This patch cleans up the patch_ca0132() function with suggestions from Takashi Sakamoto. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-09ALSA: hda/ca0132 - Fix microphone inconsistency issuesConnor McAdams1-0/+6
This patch fixes microphone inconsistency issues by adding a delay to each setup_defaults function. Without this, the microphone only works intermittently. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-07ALSA: hda - Add ASUS G751 quirk model entryTakashi Iwai1-0/+1
Add a corresponding model list entry for ASUS G751 so that user can test the quirk for another compatible machines more easily. Reported-and-tested-by: Håvard <hovardslill@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-07ALSA: hda - Add quirk for ASUS G751 laptopTakashi Iwai1-0/+10
ASUS G751 requires the extra COEF initialization to make it microphone working properly. Reported-and-tested-by: Håvard <hovardslill@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-04ALSA: hda/sigmatel - Disable automute for Elo VuPointMichael Pobega1-0/+20
The Elo VuPoint 15MX has two headphone jacks of which neither work by default. Disabling automute allows ALSA to work normally with the speakers & left headphone jack. Future pin configuration changes may be required in the future to get the right headphone jack working in tandem. Signed-off-by: Michael Pobega <mpobega@neverware.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-04Merge branch 'for-linus' into for-nextTakashi Iwai4-24/+66
Back-merge 4.19-devel branch into 4.20 for applying FireWire patches cleanly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-04ALSA: hda/realtek - Cannot adjust speaker's volume on Dell XPS 27 7760Kai-Heng Feng1-0/+1
The issue is the same as commit dd9aa335c880 ("ALSA: hda/realtek - Can't adjust speaker's volume on a Dell AIO"), the output requires to connect to a node with Amp-out capability. Applying the same fixup ALC298_FIXUP_SPK_VOLUME can fix the issue. BugLink: https://bugs.launchpad.net/bugs/1775068 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-03ALSA: intel8x0: Fix fall-through annotationsGustavo A. R. Silva1-4/+4
Replace "fallthru" with a proper "fall through" annotation. This fix is part of the ongoing efforts to enabling -Wimplicit-fallthrough Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-02ALSA: hda/ca0132 - Add ZxR exit commandsConnor McAdams1-0/+33
This patch adds exit operations for the Sound Blaster ZxR. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-02ALSA: hda/ca0132 - Add ZxR 600 ohm gain controlConnor McAdams1-2/+42
This patch adds a control for 600 ohm gain on the Sound Blaster ZxR. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-02ALSA: hda/ca0132 - Remove input select enum for ZxRConnor McAdams1-1/+14
This patch removes the input select control for the ZxR, as it only has one input option, rear microphone. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-02ALSA: hda/ca0132 - Add ZxR input/output select commandsConnor McAdams1-0/+25
This patch adds commands for selecting input and output on the Sound Blaster ZxR. The ZxR has no front panel header, and has line-in on the separate daughter board, so it only does rear-mic. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-02ALSA: hda/ca0132 - Add ZxR DSP post-download commandsConnor McAdams1-13/+24
This patch adds commands for setting up the ZxR after the DSP is downloaded. The ZxR already shares most of the post-download commands from the regular Sound Blaster Z. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-02ALSA: hda/ca0132 - Add ZxR init commandsConnor McAdams1-1/+13
This patch adds init commands for the main Sound Blaster ZxR card. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-02ALSA: hda/ca0132 - Add DBpro hda_codec_opsConnor McAdams1-0/+100
This patch adds separate hda_codec_ops for the DBPro daughter board, as it behaves more like a generic HDA codec than the other ca0132 cards, despite having a ca0132 on board. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-02ALSA: hda/ca0132 - Add ZxR pincfgConnor McAdams1-0/+50
This patch adds a pincfg for the ZxR, and defines which pins are used for both. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-02ALSA: hda/ca0132 - Add ZxR quirks + new quirk check functionConnor McAdams1-0/+28
This patch adds quirk ID's for the ZxR and it's daughter board, the DBPro. It also adds a function for determining the quirk for each board through HDA subsytem ID's instead of PCI subsystem ID's. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-02ALSA: hda/ca0132 - Fix surround sound with output effectsConnor McAdams1-5/+14
This patch fixes an issue where if surround sound was the selected output and output effects were enabled, the sound wasn't sent to all channels correctly. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-02ALSA: hda/ca0132 - Fix AE-5 control typeConnor McAdams1-2/+2
This patch corrects the control type of the additional AE-5 controls added in a previous patch from HDA_INPUT to HDA_OUTPUT. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Add AE-5 exit functionConnor McAdams1-0/+28
This patch adds exit commands for the AE-5. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Add AE-5 specific controlsConnor McAdams1-1/+238
This patch adds controls for the AE-5's headphone gain setting, and the DAC's interpolation filter setting. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Add input selection commands for AE-5Connor McAdams1-6/+29
This patch adds the input selection commands for the Sound BlasterX AE-5. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Add output set commands for AE-5Connor McAdams1-10/+70
This patch adds output selection commands for the AE-5. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Clean up ca0132_alt_out_selectConnor McAdams1-51/+69
This patch cleans up ca0132_alt_out_select by moving the card specific output commands into a separate function. As more cards are added, the function ca0132_alt_out_select is going to get more bloated with these, so moving into a separate function tries to keep that from happening. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Add DSP setup functions for AE-5Connor McAdams1-0/+215
This patch adds DSP setup functions for the AE-5. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Merge post-dsp functions + cleanupConnor McAdams1-96/+75
This patch cleans up some of the formatting of the post-dsp load setup functions, and also merges some of the sub functions into individual ones. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Change firmware name and usageConnor McAdams1-5/+7
The Recon3D, AE-5, Z and ZxR all share the same firmware file. Rename this from the specific "ctefx-sbz.bin" to "ctefx-desktop.bin" and set the AE-5 and Recon3D to use it as well. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Add AE-5 regular init setupConnor McAdams1-0/+12
This patch adds AE-5 specific stuff to the ca0132_alt_init function. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Add AE-5 pre-init and ca0113 functionsConnor McAdams1-23/+134
This patch adds AE-5 pre-init functions that happen before the main ca0132_alt_init, and gives functions related to the ca0113 a ca0113 prefix instead of ca0132. It also adds functions to write to the 8051's SFRs, and to write the special ca0113 commands for the AE-5. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Change ca0132_mmio_init for AE-5Connor McAdams1-6/+55
This patch adds the unique writes for the AE-5 on startup to ca0132_mmio_init. The other cards share some addresses written to, but use different values. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Set AE-5 bools and select mixerConnor McAdams1-1/+10
This patch sets the bool values for the AE-5, as well as selects the mixer it will use. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Add pincfg for AE-5Connor McAdams1-13/+60
This patch adds the pincfg for the Sound BlasterX AE-5, and cleans up the function it's assigned in. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Add quirk for Sound BlasterX AE-5Connor McAdams1-0/+2
This patch adds the PCI subsys ID quirk for the Sound BlasterX AE-5. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Define new verbs and control paramsConnor McAdams1-11/+12
This patch defines some new verbs found from reverse engineering of the onboard 8051 CPU, and a control param found there as well. This clears up usage of these verbs in other parts of the driver, and removes their usage where they're now known to be unnecessary. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-14ALSA: atiixp: fix fall-through annotationsGustavo A. R. Silva1-3/+3
Replace "fallthru" with a proper "fall through" annotation. This fix is part of the ongoing efforts to enabling -Wimplicit-fallthrough Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-13ALSA: hda - Enable runtime PM only for discrete GPUTakashi Iwai2-23/+64
The recent change of vga_switcheroo allowed the runtime PM for HD-audio on AMD GPUs, but this also resulted in a regression. When the HD-audio controller driver gets runtime-suspended, HD-audio link is turned off, and the hotplug notification is ignored. This leads to the inconsistent audio state (the connection isn't notified and ELD is ignored). The best fix would be to implement the proper ELD notification via the audio component, but it's still not ready. As a quick workaround, this patch adds the check of runtime_idle and allows the runtime suspend only when the vga_switcheroo is bound with discrete GPU. That is, a system with a single GPU and APU would be again without runtime PM to keep the HD-audio link for the hotplug notification and ELD read out. Also, the codec->auto_runtime_pm flag is set only for the discrete GPU at the time GPU gets bound via vga_switcheroo (i.e. only dGPU is forcibly runtime-PM enabled), so that APU can still get the ELD notification. For identifying which GPU is bound, a new vga_switcheroo client callback, gpu_bound, is implemented. The vga_switcheroo simply calls this when GPU is bound, and tells whether it's dGPU or APU. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200945 Fixes: 07f4f97d7b4b ("vga_switcheroo: Use device link for HDA controller") Reported-by: Jian-Hong Pan <jian-hong@endlessm.com> Tested-by: Jian-Hong Pan <jian-hong@endlessm.com> Acked-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-13ALSA: intel8x0m: Register irq handler after register initializationsTakashi Iwai1-10/+10
The interrupt handler has to be acquired after the other resource initialization when allocated with IRQF_SHARED. Otherwise it's triggered before the resource gets ready, and may lead to unpleasant behavior. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-12ALSA: hda: Fix implicit definition of pci_iomap() on SHMark Brown1-0/+1
Include asm/io.h directly so we've got a definition of pci_iomap(), the current set of includes do this implicitly on most architectures but not on SH. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.