aboutsummaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs
AgeCommit message (Collapse)AuthorFilesLines
2020-09-21ASoC: tas2770: Fix unbalanced calls to pm_runtimeDan Murphy1-9/+0
Fix the unbalanced call to the pm_runtime_disable when removing the module. pm_runtime_enable is not called nor is the pm_runtime setup in the code. Remove the i2c_remove function and the pm_runtime_disable. Fixes: 1a476abc723e6 ("tas2770: add tas2770 smart PA kernel driver") Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200918190548.12598-5-dmurphy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-21ASoC: tas2562: Add the TAS2110 class-D amplifierDan Murphy1-0/+48
Add the TAS2110 amplifier to the TAS2562 driver. The TAS2110 is register and bitmap compatible. The chips differ in that the TAS2110 does not have the I/V Sense feedback path. Since these features do not exist the device needs to be registered without these controls. Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200921153820.18357-2-dmurphy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-21Merge branch 'asoc-5.9' into asoc-5.10Mark Brown6-45/+75
2020-09-21ASoC: tlv320aic32x4: Enable fast chargeMiquel Raynal2-0/+15
At power-up the analog circuits may take up to one full second before being charged with the default configuration. Using the analog blocks before they are ready generates a *very* crappy sound. Enable the fast charge feature, which will require a bit more power than normal charge but will definitely speed up the starting operation by shrinking this delay to up to 40 ms. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20200911173140.29984-4-miquel.raynal@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-21ASoC: tlv320aic32x4: Fix bdiv clock rate derivationMiquel Raynal1-3/+6
Current code expects a single channel to be always used. Fix this situation by forwarding the number of channels used. Then fix the derivation of the bdiv clock rate. Fixes: 96c3bb00239d ("ASoC: tlv320aic32x4: Dynamically Determine Clocking") Suggested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20200911173140.29984-3-miquel.raynal@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-21ASoC: tlv320aic32x4: Ensure a minimum delay before clock stabilizationMiquel Raynal1-1/+8
As indicated in the datasheet, a 10ms delay must be observed after programming the divisors. The lack of delay prevents the codec to work properly and the playback appears extremely slow and totally un-audible on a custom sama5 based board. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20200911173140.29984-2-miquel.raynal@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-21ASoC: rt711: wait for the delayed work to finish when the system suspendsShuming Fan1-0/+4
To avoid the IO error, we need to cancel the delayed work and wait for it to finish. Signed-off-by: Shuming Fan <shumingf@realtek.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200921094308.31921-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-21ASoC: tas2770: Fix error handling with update_bitsDan Murphy1-28/+24
snd_soc_update_bits returns a 1 when the bit was successfully updated, returns a 0 is no update was needed and a negative if the call failed. The code is currently failing the case of a successful update by just checking for a non-zero number. Modify these checks and return the error code only if there is a negative. Fixes: 1a476abc723e6 ("tas2770: add tas2770 smart PA kernel driver") Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200918190548.12598-7-dmurphy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-21ASoC: tas2770: Fix required DT properties in the codeDan Murphy1-11/+10
The devicetree binding indicates that the ti,asi-format, ti,imon-slot-no and ti,vmon-slot-no are not required but the driver requires them or it fails to probe. Honor the binding and allow these entries to be optional and set the corresponding values to the default values for each as defined in the data sheet. Fixes: 1a476abc723e6 ("tas2770: add tas2770 smart PA kernel driver") Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200918190548.12598-4-dmurphy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-21ASoC: tas2770: Add missing bias level power statesDan Murphy1-1/+6
Add the BIAS_STANDBY and BIAS_PREPARE to the set_bias_level or else the driver will return -EINVAL which is not correct as they are valid states. Fixes: 1a476abc723e6 ("tas2770: add tas2770 smart PA kernel driver") Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200918190548.12598-2-dmurphy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-21ASoC: tas2770: Fix calling reset in probeDan Murphy1-2/+2
tas2770_reset is called during i2c probe. The reset calls the snd_soc_component_write which depends on the tas2770->component being available. The component pointer is not set until codec_probe so move the reset to the codec_probe after the pointer is set. Fixes: 1a476abc723e6 ("tas2770: add tas2770 smart PA kernel driver") Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200918190548.12598-1-dmurphy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-21ASoC: rt700: wait for the delayed work to finish when the system suspendsShuming Fan1-0/+3
To avoid the IO error, we need to cancel the delayed work and wait for it to finish. Signed-off-by: Shuming Fan <shumingf@realtek.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200921094244.31869-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-21ASoC: tas2562: Add the TAS2564 compatibleDan Murphy1-0/+3
Add the TAS2564 as a supported amplifier. This amplifier is register, bitmap and feature compatible to the TAS2562. Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200918150130.21015-2-dmurphy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-21ASoC: cs42l51: add additional ADC volume controlsGuillermo Rodríguez1-0/+9
Add volume controls for: - Analog programmable gain amplifier (PGA) (-3 .. +12 dB) - ADC attenuator (0 .. -96 dB) Signed-off-by: Guillermo Rodríguez <guille.rodriguez@gmail.com> Acked-by: David Rhodes <David.rhodes@cirrus.com> Link: https://lore.kernel.org/r/20200918134317.22574-1-guille.rodriguez@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-18Merge tag 'sound-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds10-23/+46
Pull sound fixes from Takashi Iwai: "Here is a collection of fixes for 5.9. All look small and are nothing scary. The majority of changes are about ASoC driver- specific fixes, while there are a couple of ASoC core fixes (DAI lookup and lockdep stuff) and usual HD-audio quirks" * tag 'sound-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits) ALSA: hda/realtek - The Mic on a RedmiBook doesn't work ASoC: tlv320adcx140: Wake up codec before accessing register ASoC: core: Do not cleanup uninitialized dais on soc_pcm_open failure ALSA: hda: fixup headset for ASUS GX502 laptop ASoC: Intel: bytcr_rt5640: Add quirk for MPMAN Converter9 2-in-1 ASoC: Intel: haswell: Fix power transition refactor ASoC: tlv320adcx140: Fix accessing uninitialized adcx140->dev ASoC: wm8994: Ensure the device is resumed in wm89xx_mic_detect functions ASoC: wm8994: Skip setting of the WM8994_MICBIAS register for WM1811 ASoC: meson: axg-toddr: fix channel order on g12 platforms ASoC: soc-core: add snd_soc_find_dai_with_mutex() ASoC: qcom: common: Fix refcount imbalance on error ASoC: rt700: Fix return check for devm_regmap_init_sdw() ASoC: rt715: Fix return check for devm_regmap_init_sdw() ASoC: rt711: Fix return check for devm_regmap_init_sdw() ASoC: rt1308-sdw: Fix return check for devm_regmap_init_sdw() ASoC: max98373: Fix return check for devm_regmap_init_sdw() ASoC: ti: fixup ams_delta_mute() function name ASoC: pcm3168a: ignore 0 Hz settings ASoC: Intel: tgl_max98373: fix a runtime pm issue in multi-thread case ...
2020-09-18ASoC: tlv320adcx140: Add support for configuring GPIO pinCamel Guo2-0/+45
Add support to configure the GPIO pin to the specific configuration. The GPIO pin can be configured as GPO, IRQ, SDOUT2, PDMCLK, MICBASE_EN, GPI, MCLK, SDIN, PDMDIN1, PDMDIN2, PDMDIN3 or PDMDIN4 and the output drive can be configured with various configuration. Signed-off-by: Camel Guo <camelg@axis.com> Link: https://lore.kernel.org/r/20200918114025.18205-2-camel.guo@axis.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17ASoC: ak4458: Add DSD support for ak4458 and ak4497Shengjiu Wang2-8/+86
Ak4458 can't support DSD512 format, but ak4497 can, so add a new enum variable (enum ak4458_type) in ak4458_drvdata to distinguish these two platforms. Ak4497 has two kinds of DSD input pin, it can be selected by the dsd-path property from DT. In hw_params(), bit clock is calculated according to different DSD format (DSD64, DSD128, DSD256, DSD512), then registers are configured. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1600178220-28973-2-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17ASoC: tlv320adcx140: Add the config to configure Tx ASI outputDan Murphy2-0/+12
Add code to allow the ASI Tx output to be placed into High-z mode during unused ASI cycles. This allows for other devices that may be on the bus to drive the ASI out. By default the 320adcx140 sends 0's for unused cycles. Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200915190606.1744-4-dmurphy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17ASoC: codec: tlv320aic32x4: do software reset before clock registrationMatthias Schiffer1-8/+10
To avoid the actual PLL settings to differ from the state expected by the clock driver, the codec should only be fully reset before the clocks are registered. But we also need to ensure that the software reset happens at all before clock registration, as not all boards have a reset GPIO. Move the software reset from aic32x4_component_probe() to aic32x4_probe() and reorder the reset and registration sequence: 1. Reset via GPIO (if available) 2. Reset via software 3. Register component 4. Register clocks Note that aic32x4_component_probe() is only called after aic32x4_probe() has finished, so the reset in aic32x4_component_probe() was happening too late. Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Link: https://lore.kernel.org/r/20200902133043.19504-2-matthias.schiffer@ew.tq-group.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17ASoC: codec: tlv320aic32x4: fix missing aic32x4_disable_regulators() in error pathMatthias Schiffer1-3/+7
The regulators need to be disabled in the aic32x4_register_clocks() failure case as well. Fixes: 9d4befff5a95 ("ASoC: codec: tlv3204: Moving GPIO reset and add ADC reset") Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Link: https://lore.kernel.org/r/20200902133043.19504-1-matthias.schiffer@ew.tq-group.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17Merge branch 'asoc-5.9' into asoc-5.10Mark Brown13-77/+202
2020-09-17ASoC: tlv320adcx140: Fix BCLK inversion for DSP modesDan Murphy1-21/+23
Fix the BCLK inversion for DSP modes This is how it is defined by ASoC: * BCLK: * - "normal" polarity means signal is available at rising edge of BCLK * - "inverted" polarity means signal is available at falling edge of BCLK The adcx140 defines the BCLK edge based on coding type. The PCM (DSP_A/B) should drive on rising and sample on falling edge, so from ASoC pov, it is IB_NF. But from the codec pov if it is configured in DSP mode, then the BCLK should not be inverted, defaults to the coding standard. For i2s, it is NB_NF from ASoC pov (drive on falling, sample on rising). >From the codec's pov BCLK should not invert either, as this is the default for the coding. So, inversion must take the format into account: IB_NF + DSP_A/B == the codec bclk inversion should be disabled NB_NF + DSP_A/B == the codec bclk inversion should be enabled NB_NF + I2S == the codec bclk inversion should be disabled Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200915190606.1744-2-dmurphy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17ASoC: tlv320adcx140: Idle the device while writing registersDan Murphy2-11/+34
It was observed that if the device was active and register writes were performed there were some unwanted behaviors particularly when writing the word length and some filter options. So when writing to the device the device should be placed in sleep mode and then exit sleep mode once the register update is complete. Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200915190606.1744-1-dmurphy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17ASoC: tlv320adcx140: Fix digital gain rangeCamel Guo1-1/+1
According to its datasheet, the digital gain should be -100 dB when CHx_DVOL is 1 and 27 dB when CHx_DVOL is 255. But with the current dig_vol_tlv, "Digital CHx Out Volume" shows 27.5 dB if CHx_DVOL is 255 and -95.5 dB if CHx_DVOL is 1. This commit fixes this bug. Fixes: 689c7655b50c ("ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family") Signed-off-by: Camel Guo <camelg@axis.com> Link: https://lore.kernel.org/r/20200908090417.16695-1-camel.guo@axis.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-14ASoC: rt1015: Fix the failure to flush DAC data before playbackderek.fang2-7/+63
Fix the failure to flush DAC data before playback. Signed-off-by: derek.fang <derek.fang@realtek.com> Link: https://lore.kernel.org/r/1600073839-6762-2-git-send-email-derek.fang@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-14ASoC: rt1015: Fix DC calibration on bypass boost modederek.fang2-14/+35
Fix the DC calibration unsuccessful issue on rt1015 bypass boost mode. Signed-off-by: derek.fang <derek.fang@realtek.com> Link: https://lore.kernel.org/r/1600073839-6762-1-git-send-email-derek.fang@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-10ASoC: rt1015p: add codec driverTzung-Bi Shih3-0/+157
Adds rt1015p codec driver. Rt1015p is a rt1015 variant. - It doesn't support I2C. - It only supports S24, 48kHz, 64FS. Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20200910042949.3795682-2-tzungbi@google.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-10ASoC: codecs: realtek-soundwire: ignore initial PARITY errorsPierre-Louis Bossart5-0/+5
The parity calculation is not reset on a Severe Reset, which leads to misleading/harmless errors reported on startup. The addition of a quirk helps filter out such errors while leaving the error checks on in steady-state. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20200908134521.6781-6-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-10ASoC/soundwire: bus: use property to set interrupt masksPierre-Louis Bossart7-0/+22
Add a slave-level property and program the SCP_INT1_MASK as desired by the codec driver. Since there is no DisCo property this has to be an implementation-specific firmware property or hard-coded in the driver. The only functionality change is that implementation-defined interrupts are no longer set for amplifiers - those interrupts are typically for jack detection or acoustic event detection/hotwording. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20200908134521.6781-2-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-08ASoC: tlv320adcx140: Wake up codec before accessing registerCamel Guo1-12/+12
According to its datasheet, after reset this codec goes into sleep mode. In this mode, any register accessing should be avoided except for exiting sleep mode. Hence this commit moves SLEEP_CFG access before any register accessing. Signed-off-by: Camel Guo <camelg@axis.com> Acked-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200908083521.14105-2-camel.guo@axis.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-08ASoC: mt6359: fix failed to parse DT propertiesTzung-Bi Shih1-4/+9
Mt6359 platform device is instantiated by mfd_add_devices(). In the case, dev->of_node is NULL so that mt6359_parse_dt() always fails to parse the desired DT properties. Gets the DT properties via dev->parent->of_node. Fixes: 8061734ab654 ("ASoC: mediatek: mt6359: add codec driver") Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20200908070044.1142644-1-tzungbi@google.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-03ASoC: codecs: soundwire: remove port_ready[] usage from codecs.Pierre-Louis Bossart6-101/+6
port_ready will be changed to a fixed array in sdw.h and all initialization work will be done at soundwire side in the following patch. So remove them from codec drivers. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20200831134318.11443-2-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-01ASoC: tlv320adcx140: Fix accessing uninitialized adcx140->devCamel Guo1-1/+3
In adcx140_i2c_probe, adcx140->dev is accessed before its initialization. This commit fixes this bug. Fixes: 689c7655b50c ("ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family") Acked-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Camel Guo <camel.guo@axis.com> Link: https://lore.kernel.org/r/20200901135736.32036-1-camel.guo@axis.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-01ASoC: rt5682: Prefer async probeDouglas Anderson1-0/+1
The probe of rt5682 is pretty slow. A quick measurement shows that it takes ~650 ms on at least one board. There's no reason to block all other drivers waiting for this probe to finish. Set the flag to allow other drivers to probe while we're probing. Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200828162005.1.I4f67f494c4f759b0e5c7f487e040dfdcf16e0876@changeid Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-01ASoC: wm8994: Ensure the device is resumed in wm89xx_mic_detect functionsSylwester Nawrocki1-0/+8
When the wm8958_mic_detect, wm8994_mic_detect functions get called from the machine driver, e.g. from the card's late_probe() callback, the CODEC device may be PM runtime suspended and any regmap writes have no effect. Add PM runtime calls to these functions to ensure the device registers are updated as expected. This suppresses an error during boot "wm8994-codec: ASoC: error at snd_soc_component_update_bits on wm8994-codec" caused by the regmap access error due to the cache_only flag being set. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20200827173357.31891-2-s.nawrocki@samsung.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-01ASoC: wm8994: Skip setting of the WM8994_MICBIAS register for WM1811Sylwester Nawrocki3-0/+6
The WM8994_MICBIAS register is not available in the WM1811 CODEC so skip initialization of that register for that device. This suppresses an error during boot: "wm8994-codec: ASoC: error at snd_soc_component_update_bits on wm8994-codec" Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20200827173357.31891-1-s.nawrocki@samsung.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-08-28ASoC: tlv320adcx140: Add digital mic channel enable routingDan Murphy1-0/+37
Add the audio routing map to enable the digital mic paths when the analog mic paths are not enabled. Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200828112855.10112-1-dmurphy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-08-27ASoC: max9867: shutdown codec when changing filter typePavel Dobias2-15/+120
Changing filter type without disabling codec results in filter malfunction. Disable codec when changing filter type. Signed-off-by: Pavel Dobias <dobias@2n.cz> Link: https://lore.kernel.org/r/20200827102528.29677-1-dobias@2n.cz Signed-off-by: Mark Brown <broonie@kernel.org>
2020-08-26ASoC: rt700: Fix return check for devm_regmap_init_sdw()Vinod Koul1-2/+2
devm_regmap_init_sdw() returns a valid pointer on success or ERR_PTR on failure which should be checked with IS_ERR. Also use PTR_ERR for returning error codes. Reported-by: Takashi Iwai <tiwai@suse.de> Fixes: 7d2a5f9ae41e ("ASoC: rt700: add rt700 codec driver") Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200826163340.3249608-6-vkoul@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-08-26ASoC: rt715: Fix return check for devm_regmap_init_sdw()Vinod Koul1-2/+2
devm_regmap_init_sdw() returns a valid pointer on success or ERR_PTR on failure which should be checked with IS_ERR. Also use PTR_ERR for returning error codes. Reported-by: Takashi Iwai <tiwai@suse.de> Fixes: d1ede0641b05 ("ASoC: rt715: add RT715 codec driver") Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200826163340.3249608-5-vkoul@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-08-26ASoC: rt711: Fix return check for devm_regmap_init_sdw()Vinod Koul1-2/+2
devm_regmap_init_sdw() returns a valid pointer on success or ERR_PTR on failure which should be checked with IS_ERR. Also use PTR_ERR for returning error codes. Reported-by: Takashi Iwai <tiwai@suse.de> Fixes: 320b8b0d13b8 ("ASoC: rt711: add rt711 codec driver") Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200826163340.3249608-4-vkoul@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-08-26ASoC: rt1308-sdw: Fix return check for devm_regmap_init_sdw()Vinod Koul1-2/+2
devm_regmap_init_sdw() returns a valid pointer on success or ERR_PTR on failure which should be checked with IS_ERR. Also use PTR_ERR for returning error codes. Reported-by: Takashi Iwai <tiwai@suse.de> Fixes: a87a6653a28c ("ASoC: rt1308-sdw: add rt1308 SdW amplifier driver") Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200826163340.3249608-3-vkoul@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-08-26ASoC: max98373: Fix return check for devm_regmap_init_sdw()Vinod Koul1-2/+2
devm_regmap_init_sdw() returns a valid pointer on success or ERR_PTR on failure which should be checked with IS_ERR. Also use PTR_ERR for returning error codes. Reported-by: Takashi Iwai <tiwai@suse.de> Fixes: 56a5b7910e96 ("ASoC: codecs: max98373: add SoundWire support") Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200826163340.3249608-2-vkoul@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-08-25ASoC: hdac_hdmi: tidy up a memset()Dan Carpenter1-1/+1
The ARRAY_SIZE() is the number of the elements but we want to use the number of bytes. Fortunately, in this case the value is the same so it doesn't affect runtime. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200825104623.GA278587@mwanda Signed-off-by: Mark Brown <broonie@kernel.org>
2020-08-25ASoC: pcm3168a: ignore 0 Hz settingsKuninori Morimoto1-0/+7
Some sound card try to set 0 Hz as reset, but it is impossible. This patch ignores it to avoid error return. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87a6yjy5sy.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-08-24Merge series "ASoC: Intel: machine driver updates for 5.10" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:Mark Brown1-0/+3
This series updates the tables used to select SoundWire configurations for CometLake and TigerLake, and adds support for SDCA (SoundWire Device Class for Audio) codecs in the common machine driver. These codec drivers are still being tested on early silicon/boards and will be contributed at a later time. For TigerLake Chromebooks a new DMI quirk is added, as well as a means to override the topology names. A pm_runtime fix is also provided to deal with playback/capture dependencies with an amplifier w/ feedback. I also included a minor codec correction for the TGL amplifier. Bard Liao (5): ASoC: Intel: modify SoundWire version id in acpi match table ASoC: Intel: sof_sdw: check SoundWire version when matching codec ASoC: Intel: sof_sdw: rename id as part_id ASoC: Intel: sof_sdw: add rt711 rt1316 rt714 SDCA codec support. ASoC: Intel: sof_sdw: clean-up inclusion of header files Pierre-Louis Bossart (5): ASoC: Intel: soc-acpi: cnl: add support for rt5682 on SoundWire link2 ASoC: Intel: sof-soundwire: add support for rt5682 on link2 ASoC: Intel: soc-acpi: mirror CML and TGL configurations ASoC: Intel: soc-acpi: add support for SDCA boards ASoC: codecs: max98373-sdw: add missing test on resume Rander Wang (2): ASoC: Intel: tgl_max98373: fix a runtime pm issue in multi-thread case ASoC: Intel: sof_sdw: Add support for product Ripto Sathyanarayana Nujella (2): ASoC: Intel: sof_rt5682: override quirk data for tgl_max98373_rt5682 ASoC: SOF: Add topology filename override based on dmi data match sound/soc/codecs/max98373-sdw.c | 3 + sound/soc/intel/boards/Kconfig | 3 + sound/soc/intel/boards/Makefile | 7 +- sound/soc/intel/boards/sof_maxim_common.c | 7 +- sound/soc/intel/boards/sof_rt5682.c | 13 ++ sound/soc/intel/boards/sof_sdw.c | 98 +++++++--- sound/soc/intel/boards/sof_sdw_common.h | 22 ++- sound/soc/intel/boards/sof_sdw_dmic.c | 1 + sound/soc/intel/boards/sof_sdw_max98373.c | 2 + sound/soc/intel/boards/sof_sdw_rt1308.c | 2 + sound/soc/intel/boards/sof_sdw_rt1316.c | 113 ++++++++++++ sound/soc/intel/boards/sof_sdw_rt5682.c | 2 + sound/soc/intel/boards/sof_sdw_rt700.c | 2 + sound/soc/intel/boards/sof_sdw_rt711.c | 2 + sound/soc/intel/boards/sof_sdw_rt711_sdca.c | 174 ++++++++++++++++++ sound/soc/intel/boards/sof_sdw_rt715_sdca.c | 42 +++++ .../intel/common/soc-acpi-intel-cml-match.c | 79 +++++++- .../intel/common/soc-acpi-intel-cnl-match.c | 33 +++- .../intel/common/soc-acpi-intel-icl-match.c | 10 +- .../intel/common/soc-acpi-intel-tgl-match.c | 165 ++++++++++++++++- sound/soc/sof/intel/hda.c | 8 +- sound/soc/sof/sof-pci-dev.c | 24 +++ 22 files changed, 764 insertions(+), 48 deletions(-) create mode 100644 sound/soc/intel/boards/sof_sdw_rt1316.c create mode 100644 sound/soc/intel/boards/sof_sdw_rt711_sdca.c create mode 100644 sound/soc/intel/boards/sof_sdw_rt715_sdca.c base-commit: fcea8b023a5f06ea0180ae65b01520b0414ee325 -- 2.25.1
2020-08-24ASoC: ak5558: Add regulator supportShengjiu Wang1-0/+30
"AVDD" is for analog power supply, "DVDD" is for digital power supply, they can improve the power management. As the regulator is enabled in pm runtime resume, which is behind the component driver probe, so accessing registers in component driver probe will fail. Fix this issue by enabling regcache_cache_only after pm_runtime_enable. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1598190877-9213-2-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-08-24ASoC: codecs: max98373-sdw: add missing test on resumePierre-Louis Bossart1-0/+3
All existing SoundWire codecs follow the same pattern on resume, except for this codec which doesn't test if the hardware is initialized. Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200821195603.215535-8-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva2-2/+2
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-21Merge tag 'sound-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds4-19/+51
Pull sound fixes from Takashi Iwai: "A collection of small fixes over several drivers, but all are driver- specific and nothing looks scary. Slightly large changes are seen in ASoC qcom driver for the bugs that were revealed by the recent ASoC core change to report the invalid register access errors. Also ASoC fsl got a slight intensive change for the distortion fix. Others are only trivial fixes or device-specific quirks" * tag 'sound-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (25 commits) ALSA: hda: avoid reset of sdo_limit ALSA: hda/realtek: Add quirk for Samsung Galaxy Book Ion ALSA: usb-audio: ignore broken processing/extension unit ASoC: intel: Fix memleak in sst_media_open ASoC: wm8994: Avoid attempts to read unreadable registers ASoC: msm8916-wcd-analog: fix register Interrupt offset ASoC: wm8994: Prevent access to invalid VU register bits on WM1811 ALSA: hda/realtek: Add model alc298-samsung-headphone ALSA: usb-audio: Update documentation comment for MS2109 quirk ALSA: isa: fix spelling mistakes in the comments ALSA: usb-audio: Add capture support for Saffire 6 (USB 1.1) ALSA: hda/realtek: Add quirk for Samsung Galaxy Flex Book ASoC: q6routing: add dummy register read/write function ASoC: q6afe-dai: mark all widgets registers as SND_SOC_NOPM ASoC: Make soc_component_read() returning an error code again ASoC: amd: Replacing component->name with codec_dai->name. ASoC: fsl: Fix unused variable warning ASoC: tegra: tegra210_i2s: Fix compile warning with CONFIG_PM=n ASoC: tegra: tegra210_dmic: Fix compile warning with CONFIG_PM=n ASoC: tegra: tegra210_ahub: Fix compile warning with CONFIG_PM=n ...
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.