aboutsummaryrefslogtreecommitdiffstats
path: root/sound/soc/davinci (follow)
AgeCommit message (Collapse)AuthorFilesLines
2013-02-11Merge remote-tracking branch 'asoc/topic/tlv320aic3x' into asoc-nextMark Brown1-3/+3
2013-02-04ASoC: tlv320aic3x: Convert mic bias to a supply widgetHebbar Gururaja1-3/+3
Convert MicBias widgets to supply widget. On tlv320aic3x, Mic bias power on/off shares the same register bits with output mic bias voltage. So, when power on mic bias, we need reclaim it to voltage value. Provide a new platform data so that the micbias voltage can be sent according to board requirement. Now since tlv320aic3x codec driver is DT aware, update dt files and functions to handle this new "micbias-vg" platform data. Because of sharing of bits, when enabling the micbias, voltage also needs to be updated. So use SND_SOC_DAPM_POST_PMU & SND_SOC_DAPM_PRE_PMD macro to create an event to handle this. Since micbias is converted to supply widget, updated machine drivers as well. This change is runtime tested on da850-evm with audio loopback (arecord|aplay) for confirmation. Signed-off-by: Hebbar Gururaja <gururaja.hebbar@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-27ASoC: McASP: Fix data rotation for playback. Enables 24bit audio playbackMichal Bachraty1-1/+1
u32 rotate = (32 - word_length) / 4; This implementation is wrong, but it works only for 16, or 32 bit audio data. (rotation for 16 or 32 bit is same as in code I present) Mcasp rotated data in 4 bits (max value 0x7)and then masks them . That data are sended to i2s bus. For 24 bit or 20 bit or other data formats, this code rotates data badly and you hear somethink like noise. You need to use u32 rotate = (word_length / 4) & 0x7; to proper data rotation. Signed-off-by: Michal Bachraty <michal.bachraty@streamunlimited.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-07ASoC: McASP: implement a way to force BCLK/LRCLK ratiosDaniel Mack2-0/+16
Depending on the Codec, the the BCLK/LRCLK ratio might not be freely chosen by the CPU DAI. For example, some Codec might want to be supplied with 32-bit samples for both its channels regardless of the actual audio word size the CPU sends. In such cases, the rest of the bits on the data lines must be padded with zeros: _______________________________ LRCLK / \ --' `---------- ..... BCLK ||||||||||||||||||||||||||||||||||||||||||||||| ..... DATA ____||||||||||||||||_________________|||||||||| ..... |<-- data -->|<-- pads --> | This patch adds a new clock divider to configure the BCLK/LRCLK ratio. If the machine code uses that divider, the driver uses the specified value, instead of deriving that information from the audio word size. Otherwise, the original behaviour is retained. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-07ASoC: McASP: calculate values for channel sizeDaniel Mack2-63/+10
Change davinci_config_channel_size() to derive the values for XSSZ and XROT in DAVINCI_MCASP_[RT]XFMT_REG from the configured word length rather than hard-coding them in a switch/case block. Also, by directly passing the word length to davinci_config_channel_size(), we can get rid of the DAVINCI_AUDIO_WORD_* enum. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-07ASoC: McASP: remove unused variablesDaniel Mack2-3/+0
codec_fmt and sample_rate variables are unused in both snd_platform_data and davinci_audio_dev, so drop them. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-22ASoC: davinci: replace private sram api with genallocMatt Porter3-6/+35
Removes the DaVinci private SRAM API and replaces it with the genalloc API. The SRAM gen_pool is passed in pdata since DaVinci is in the early stages of DT conversion. [zonque@gmail.com: stub out gen_pool functions for !CONFIG_GENERIC_ALLOCATOR] Signed-off-by: Matt Porter <mporter@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-15ASoC: McASP: treat SNDRV_PCM_FORMAT_U24_* as 32 bit wordsDaniel Mack1-2/+2
Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-15ASoC: McASP: add support for 24 bit samplesDaniel Mack1-0/+12
Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-15ASoC: McASP: set format parameters in dependence of the DAI formatDaniel Mack1-4/+17
The FSDUR flag configures whether the frame clock uses a high phase of only one bit or a full word. This has to be set depending on the DAI format. For other modes than DSP_B, the FSXDLY/FSRDLY fields have to be set to 1. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-15ASoC: McASP: make AHCLK direction configurableDaniel Mack2-6/+25
Add a .set_sysclk function to pass the direction of the clock down to the driver. Only enable AHCLKX in the PDIR register when the CPU is driving the clock. This also removes the modification of the AHCLKXE/AHCLKRE bits in the hw_params callback, and users must set the desired configuration using snd_soc_dai_set_sysclk(), which this patch also does for the only user in mainline (davinci-evm). Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-15ASoC: McASP: add support for clock dividersDaniel Mack1-1/+31
Add support for the internal clock dividers of the McASP driver. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-15ASoC: enable 192KHz support for McASPDaniel Mack2-13/+5
Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-06ASoC: Davinci: McASP: add support new McASP IP VariantHebbar, Gururaja1-13/+73
The OMAP2+ variant of McASP is different from Davinci variant w.r.to some register offset. Changes - Add new MCASP_VERSION_3 to identify new variant. New DT compatible "ti,omap2-mcasp-audio" to identify version 3 controller. - The register offsets are handled depending on the version. Note: DMA parameters (dma fifo offset) are not updated and will be done later. Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-05Merge branch 'asoc-omap' into for-3.7Mark Brown1-2/+8
2012-08-31ASoC: Davinci: evm: Fix typo in cpu dai nameHebbar, Gururaja1-1/+1
Fix typo caused by recent commit (cf53756 - ASoC: davinci: davinci-pcm does not need to be a plaform_driver) Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-27ASoC: Davinci: McASP: add device tree support for McASPHebbar, Gururaja1-1/+123
Add device tree probe for McASP driver. Note: DMA parameters are not populated from DT and will be done later. Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-27ASoC/ARM: Davinci: McASP: split asp header into platform and audio specificHebbar, Gururaja5-9/+4
Davinci McASP header & driver are shared by few OMAP platforms (like TI81xx, AM335x). Splitting asp header into Davinci platform specific header and Audio specific header helps to share them across platforms. Audio specific defines is moved to to common <linux/platform_data/davinci_asp.h> so that the header can be accessed by all related platforms. While here, correct the header usage (remove multiple header re-definitions and unused headers) and remove platform names from structures comments and enum. Also some some coding style errors. Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com> Acked-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-27ASoC: davinci: davinci-pcm does not need to be a plaform_driverHebbar, Gururaja7-25/+46
Same as the commit 518de86 (ASoC: tegra: register 'platform' from DAIs, get rid of pdev). It makes davinci-pcm not a platform_driver but helper to register "platform", so that the platform_device for davinci-pcm can be saved completely. Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-09ASoC: McASP: Convert driver to use Runtime PM APIHebbar, Gururaja2-23/+20
* Add Runtime PM support to McASP host controller. * Use Runtime PM API to enable/disable McASP clock. This was tested on AM18x Board using suspend/resume Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-09ASoC: Davinci: McASP: remove unused header includeHebbar, Gururaja1-1/+0
Defines or parameters from <mach/mux.h> isn't used anywhere. Hence remove the header include. Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-09ASoC: Davinci: McASP: Flush the FIFO before enablingVaibhav Bedia1-2/+8
FIFO should be flushed before it is enabled for the first time. This fixes the I/O errors reported by the ASoC core on a fresh boot Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: replace 0xffffffff with DMA_BIT_MASK macroJoachim Eastwood1-2/+2
Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-07ASoC: check for substream not channels_min in pcm enginesJoachim Eastwood1-3/+2
This is a follow up on 53dea36c70c1857 which fixes the other affected pcm engines. Description from 53dea36c70c1857: Don't rely on the codec's channels_min information to decide wheter or not allocate a substream's DMA buffer. Rather check if the substream itself was allocated previously. Without this patch I was seeing null-pointer dereferenc in atmel-pcm. Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-02ASoC: davinci-i2s.c: use devm_ functionsJulia Lawall1-26/+13
The various devm_ functions allocate memory that is released when a driver detaches. This patch uses devm_kzalloc, devm_request_mem_region and devm_ioremap for data that is allocated in the probe function of a platform device and is only freed in the remove function. In this case, the original code did not contain a call to iounmap, nor does one appear anywhere else in the file. I have assumed that it is safe to use devm_ioremap for the allocation in any case. Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-02ASoC: davinci-mcasp.c: use devm_ functionsJulia Lawall1-28/+12
The various devm_ functions allocate memory that is released when a driver detaches. This patch uses devm_kzalloc, devm_request_mem_region and devm_ioremap for data that is allocated in the probe function of a platform device and is only freed in the remove function. In this case, the original code did not contain a call to iounmap, nor does one appear anywhere else in the file. I have assumed that it is safe to use devm_ioremap for the allocation in any case. Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-02ASoC: davinci-vcif.c: use devm_ functionsJulia Lawall1-10/+4
The various devm_ functions allocate memory that is released when a driver detaches. This patch uses devm_kzalloc, devm_request_mem_region and devm_ioremap for data that is allocated in the probe function of a platform device and is only freed in the remove function. Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-22ASoC: davinci: Add .owner to struct snd_soc_cardAxel Lin2-0/+7
Missed .owner of struct snd_soc_card will prevent the module from being removed from underneath its users. Reported-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-25ASoC: Convert davinci directory to module_platform_driverAxel Lin4-44/+4
Factor out some boilerplate code. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-23ASoC: Constify snd_soc_dai_ops structsLars-Peter Clausen3-3/+3
Commit 1ee46ebd("ASoC: Make the DAI ops constant in the DAI structure") introduced the possibility to have constant DAI ops structures, yet this is barley used in both existing drivers and also new drivers being submitted, although none of them modifies its DAI ops structure. The later is not surprising since existing drivers are often used as templates for new drivers. So this patch just constifies all existing snd_soc_dai_ops structs to eliminate the issue altogether. The patch was generated with the following coccinelle semantic patch: // <smpl> @@ identifier ops; @@ -struct snd_soc_dai_ops ops = +const struct snd_soc_dai_ops ops = { ... }; // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-28Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds4-74/+76
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (549 commits) ALSA: hda - Fix ADC input-amp handling for Cx20549 codec ALSA: hda - Keep EAPD turned on for old Conexant chips ALSA: hda/realtek - Fix missing volume controls with ALC260 ASoC: wm8940: Properly set codec->dapm.bias_level ALSA: hda - Fix pin-config for ASUS W90V ALSA: hda - Fix surround/CLFE headphone and speaker pins order ALSA: hda - Fix typo ALSA: Update the sound git tree URL ALSA: HDA: Add new revision for ALC662 ASoC: max98095: Convert codec->hw_write to snd_soc_write ASoC: keep pointer to resource so it can be freed ASoC: sgtl5000: Fix wrong mask in some snd_soc_update_bits calls ASoC: wm8996: Fix wrong mask for setting WM8996_AIF_CLOCKING_2 ASoC: da7210: Add support for line out and DAC ASoC: da7210: Add support for DAPM ALSA: hda/realtek - Fix DAC assignments of multiple speakers ASoC: Use SGTL5000_LINREG_VDDD_MASK instead of hardcoded mask value ASoC: Set sgtl5000->ldo in ldo_regulator_register ASoC: wm8996: Use SND_SOC_DAPM_AIF_OUT for AIF2 Capture ASoC: wm8994: Use SND_SOC_DAPM_AIF_OUT for AIF3 Capture ...
2011-10-13Drop default from "DM365 codec select" choicePaul Bolle1-1/+0
SND_DM365_EXTERNAL_CODEC does not exist, so it's a useless default. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-10-08ASoC: Remove redundant snd_soc_dapm_sync() calls from machine driversMark Brown1-2/+0
The core will sync DAPM as part of the card initialization, there is no need for machine drivers to do so during their setup. OMAP drivers are omitted as I know Peter already has patches for them. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-30ASoC: Davinci: Fix FS polarity for I2S formatJarkko Nikula1-1/+4
Commit 75d9ac4 ("ASoC: Allow DAI formats to be specified in the dai_link") changed DAI format flag values and we cannot simply invert anymore e.g. frame-sync with ^= SND_SOC_DAIFMT_NB_IF (which was anyway misuse) as there is no anymore fixed bit position for bit-clock or frame-sync inversion. Fix this by relying only on DAI format flag values passed to us and by not making any assumption on individual bit positions Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Vaibhav Bedia <vaibhav.bedia@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-16ASoC: davinci-pcm: trivial: replace link with actual chan/linkBen Gardiner1-64/+59
The ambiguously named variable 'link' is used as a temporary throughout davinci-pcm -- its presence makes grepping (and groking) the code difficult. Replace link with the value of link in almost all sites. The exception is a couple places where the last-assigned link/chan needs to be returned by a function -- in these cases, rename to last_link. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-29ASoC: davinci-mcasp: add support for unsigned PCM formatsBen Gardiner1-7/+13
Although the McASP supports sign-extending samples in RX or TX [1]; the davinci-mcasp driver does not touch the {R,X}PBIT or {R,X}PAD field of the {R,X}FMT registers meaning that the McASP will serialize the bytes it is given regardless of their signedness. So supporting unsigned formats is as simple as adding them to the metadata of the davinci-mcasp driver. Update the FMTBITs reported in the snd_soc_dai_driver and also update the case statements in davinci-mcasp's hw_params() function so that the McASP can be connected to CODECs that use unsigned values. [1] http://www.ti.com/lit/ug/sprufm1/sprufm1.pdf Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-20ASoC: davinci: add missing break statementRajashekhara, Sudhakar1-0/+1
In davinci_vcif_trigger() function, a break() statement was missing causing the davinci_vcif_stop() function to be called as a fallback after calling davinci_vcif_start(). Signed-off-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-07-20ASoC: davinci: fix codec start and stop functionsRajashekhara, Sudhakar1-4/+4
According to DM365 voice codec data sheet at [1], before starting recording or playback, ADC/DAC modules should follow a reset and enable cycle. Writing a 1 to the ADC/DAC bit in the register resets the module and clearing the bit to 0 will enable the module. But the driver seems to be doing the reverse of it. [1] http://focus.ti.com/lit/ug/sprufi9b/sprufi9b.pdf Signed-off-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-06-07ASoC: core - Optimise and refactor pcm_new() to pass only rtdLiam Girdwood1-2/+4
Currently pcm_new() passes in 3 arguments :- card, pcm and DAI. Refactor this to only pass in 1 argument (i.e. the rtd) since struct rtd contains card, pcm and DAI along with other members too that are useful too. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-06Merge branch 'for-3.0' into for-3.1Mark Brown1-1/+1
2011-05-30Merge branch 'for-2.6.40' into for-2.6.41Mark Brown1-0/+2
2011-05-26mfd: Use mfd cell platform_data for davinci cells platform bitsSamuel Ortiz1-1/+1
With the addition of a platform device mfd_cell pointer, MFD drivers can go back to passing platform back to their sub drivers. This allows for an mfd_cell->mfd_data removal and thus keep the sub drivers MFD agnostic. This is mostly needed for non MFD aware sub drivers. Cc: Miguel Aguilar <miguel.aguilar@ridgerun.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-25ASoC: davinci-pcm: comments for the conversion to BATCH modeBen Gardiner1-0/+19
In the previous commit 'ASoC: davinci-pcm: convert to BATCH mode', the phase offset of 2 was mentioned in the commit message but not well commented in the source. Add descriptive comments of the phase offset with and without ping-pong buffers enabled. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-25ASoC: davinci-pcm: convert to BATCH modeBen Gardiner1-48/+19
The davinci-pcm driver's snd_pcm_ops pointer function currently calls into the edma controller driver to read the current positions of the edma channels to determine pos to return to the ALSA framework. In particular, davinci_pcm_pointer() calls edma_get_position() and the latter has a comment indicating that "Its channel should not be active when this is called" whereas the channel is surely active when snd_pcm_ops.pointer is called. The operation of davinci-pcm in capture and playback appears to follow close the other pcm drivers who export SNDRV_PCM_INFO_BATCH except that davinci-pcm does not report it's positions from pointer() using the last transferred chunk. Instead it peeks directly into the edma controller to determine the current position as discussed above. Convert the davinci-pcm driver to BATCH mode: count the periods elapsed in the prtd->period member and use its value to report the 'pos' to the alsa framework in the davinci_pcm_pointer function. There is a phase offset of 2 periods between the position used by dma setup and the position reported in the pointer function. Either +2 in the dma setup or -2 in the pointer function (with wrapping, both) accounts for this offset -- I opted for the latter since it makes the first-time setup clearer. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Reviewed-by: Steven Faludi <stevenfaludi@nanometrics.ca> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-25ASoC: davinci-pcm: extract period elapsed functionsBen Gardiner1-4/+18
Extract functions that modify the prtd->period member in preparation for conversion to BATCH mode playback. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Reviewed-by: Steven Faludi <stevenfaludi@nanometrics.ca> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-25ASoC: davinci-pcm: fix audible glitch on 2nd ping-pong playbackBen Gardiner1-6/+7
The release of the dma channels was being performed in prepare and there was a edma_resume call for the asp-channel only being executed on START, RESUME and PAUSE_RELEASE. The mcasp on da850evm with ping-pong buffers enabled was exhibiting an audible glitch on every playback after the first. It was determined through trial and error that the following two changes fix this problem: 1) Move the edma_start calls from prepare to trigger and 2) reverse the order of starting the asp and ram channels. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Reviewed-by: Steven Faludi <stevenfaludi@nanometrics.ca> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-25ASoC: davinci-pcm: increase the maximum channelsBen Gardiner1-2/+2
Based on the registration of davinci-mcasp.1 in the davinci-evm platform setup for da830 and dm6467, davinci-pcm can handle more than the currently reported maximum channels of 2. Increase the maximum channels to 384 to match the maximum reported by davinci-mcasp.1. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Reviewed-by: Steven Faludi <stevenfaludi@nanometrics.ca> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-25ASoC: davinci-pcm: expand the .formatsBen Gardiner1-2/+18
Based on the data_type test in ping_pong_dma_setup, davinci-pcm is capable of handling data of width up to and including 32bits. " if ((data_type == 0) || (data_type > 4)) { printk(KERN_ERR "%s: data_type=%i\n", __func__, data_type); return -EINVAL; } " Update the .format member of the snd_pcm_hardware instances it registers to reflect this capability. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Reviewed-by: Steven Faludi <stevenfaludi@nanometrics.ca> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-25ASoC: davinci-pcm: trivial: make ping-pong params setup symmetricalBen Gardiner1-2/+3
The setup of the pong channel uses EDMA_CHAN_SLOT instead of & 0x3f as the setup of the ping channel does. Make the setup of ping and pong symmetric. There is no functional change introduced by this patch. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Reviewed-by: Steven Faludi <stevenfaludi@nanometrics.ca> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-19ASoC: davinci-mcasp: enable ping-pong SRAM buffersBen Gardiner1-0/+2
The davinci-i2s driver copies the platform data for playback and capture sram sizes which is in turn used by davinci-pcm to allocate ping-pong buffers. Copy also the platform data in davinci-mcasp probe. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.