aboutsummaryrefslogtreecommitdiffstats
path: root/sound/soc/fsl (follow)
AgeCommit message (Collapse)AuthorFilesLines
2014-01-31Merge tag 'sound-fix-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds1-7/+2
Pull sound fixes from Takashi Iwai: "The big chunks here are the updates for oxygen driver for Xonar DG devices, which were slipped from the previous pull request. They are device-specific and thus not too dangerous. Other than that, all patches are small bug fixes, mainly for Samsung build fixes, a few HD-audio enhancements, and other misc ASoC fixes. (And this time ASoC merge is less than Octopus, lucky seven :)" * tag 'sound-fix-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (42 commits) ALSA: hda/hdmi - allow PIN_OUT to be dynamically enabled ALSA: hda - add headset mic detect quirks for another Dell laptop ALSA: oxygen: Xonar DG(X): cleanup and minor changes ALSA: oxygen: Xonar DG(X): modify high-pass filter control ALSA: oxygen: Xonar DG(X): modify input select functions ALSA: oxygen: Xonar DG(X): modify capture volume functions ALSA: oxygen: Xonar DG(X): use headphone volume control ALSA: oxygen: Xonar DG(X): modify playback output select ALSA: oxygen: Xonar DG(X): capture from I2S channel 1, not 2 ALSA: oxygen: Xonar DG(X): move the mixer code into another file ALSA: oxygen: modify CS4245 register dumping function ALSA: oxygen: modify adjust_dg_dac_routing function ALSA: oxygen: Xonar DG(X): modify DAC/ADC parameters function ALSA: oxygen: Xonar DG(X): modify initialization functions ALSA: oxygen: Xonar DG(X): add new CS4245 SPI functions ALSA: oxygen: additional definitions for the Xonar DG/DGX card ALSA: oxygen: change description of the xonar_dg.c file ALSA: oxygen: export oxygen_update_dac_routing symbol ALSA: oxygen: add mute mask for the OXYGEN_PLAY_ROUTING register ALSA: oxygen: modify the SPI writing function ...
2014-01-29Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-1/+27
Pull slave-dma updates from Vinod Koul: - new driver for BCM2835 used in R-pi - new driver for MOXA ART - dma_get_any_slave_channel API for DT based systems - minor fixes and updates spread acrooss driver [ The fsl-ssi dual fifo mode support addition clashed badly with the other changes to fsl-ssi that came in through the sound merge. I did a very rough cut at fixing up the conflict, but Nicolin Chen (author of both sides) will need to verify and check things ] * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (36 commits) dmaengine: mmp_pdma: fix mismerge dma: pl08x: Export pl08x_filter_id acpi-dma: align documentation with kernel-doc format dma: fix vchan_cookie_complete() debug print DMA: dmatest: extend the "device" module parameter to 32 characters drivers/dma: fix error return code dma: omap: Set debug level to debugging messages dmaengine: fix kernel-doc style typos for few comments dma: tegra: add support for Tegra148/124 dma: dw: use %pad instead of casting dma_addr_t dma: dw: join split up messages dma: dw: fix style of multiline comment dmaengine: k3dma: fix sparse warnings dma: pl330: Use dma_get_slave_channel() in the of xlate callback dma: pl330: Differentiate between submitted and issued descriptors dmaengine: sirf: Add device_slave_caps interface DMA: Freescale: change BWC from 256 bytes to 1024 bytes dmaengine: Add MOXA ART DMA engine driver dmaengine: Add DMA_PRIVATE to BCM2835 driver dma: imx-sdma: Assign a default script number for ROM firmware cases ...
2014-01-21Merge tag 'mfd-3.14-1' of git://git.linaro.org/people/ljones/mfdLinus Torvalds1-1/+1
Pull MFD changes from Lee Jones: "New drivers - Samsung Maxim 14577; Micro USB, Regulator, IRQ Controller and Battery Charger - TI/National Semiconductor LP3943 I2C GPIO Expander and PWM Generator Existing driver adaptions - Expansion of Wolfson Arizona DSP and High-Pass filter controls - TI TWL6040 default Regmap support and Regcache addition/bypass - Some nice Smatch catch fixes - Conversion of TI OMAP-USB and TI TWL6030 to endian neutralness - ChromeOS EC timing (delay) adaptions and added dependency on OF - Many constifications of 'struct {mfd_cell,regmap_irq,et.al}' - Watchdog support added for NVIDIA AS3722 - Convert functions to static in TI AM335x - Realigned previously defeated functionality in TI AM335x - IIO ADC-TSC concurrency dead-lock/timeout resolution - Addition of Power Management and Clock support for Samsung core - DEFINE_PCI_DEVICE_TABLE macro removal from MFD Subsystem - Greater use of irqdomain functionality in ST-E AB8500 - Removal of 'include/linux/mfd/abx500/ab8500-gpio.h' - Wolfson WM831x PMIC Power Management changes s/poweroff/shutdown/ - Device Tree documentation added for TI/Nat Semi LP3943 - Version detection and voltage tables for TI TPS6586x PMIC devices - Simplification of Freescale MC13XXX (de-)initialisation routines - Clean-up and simplification of the Realtek parent driver - Added support for RTL8402 Realtek PCI-Express card reader - Resource leak fix for Maxim 77686 - Possible suspend BUG() fix in OMAP USB TLL - Support for new Wolfson WM5110 Revision (D) - Testing of automatic assignment of of_node in mfd_add_device() - Reversion of the above when it started to cause issues - Remove legacy Platform Data from; TI TWL Core, Qualcomm SSBI and ST-E ABx500 Pinctrl - Clean-ups; tabbing issues, function name changes, 'drvdata = NULL' removal, unused uninitialised warning mitigation, error message clarity, removal of redundant/duplicate checks, licensing (GPL -> GPL2), coding consistency, duplicate function declaration, ret checks, commit corrections, redundant of_match_ptr() helper removal, spelling, #if-deffery removal and header guards name changes" * tag 'mfd-3.14-1' of git://git.linaro.org/people/ljones/mfd: (78 commits) mfd: wm5110: Add register patch for rev D chip mfd: omap-usb-tll: Don't hold lock during pm_runtime_get/put_sync() gpio: lp3943: Remove redundant of_match_ptr helper mfd: sta2x11-mfd: Use named constants for pci_power_t values Documentation: mfd: Fix LDO index in s2mps11.txt mfd: Cleanup mfd-mcp-sa11x0.h header mfd: max8997: Use "IS_ENABLED(CONFIG_OF)" for DT code. mfd: twl6030: Fix endianness problem in IRQ handler mfd: sec-core: Add cells for S5M8767-clocks mfd: max14577: Remove redundant of_match_ptr helper mfd: twl6040: Fix sparse non static symbol warning mfd: Revert "mfd: Always assign of_node in mfd_add_device()" mfd: rtsx: Fix sparse non static symbol warning mfd: max77693: Set proper maximum register for MUIC regmap mfd: max77686: Fix regmap resource leak on driver remove mfd: Represent correct filenames in file headers mfd: rtsx: Add support for card reader rtl8402 mfd: rtsx: Add set pull control macro and simplify rtl8411 mfd: max8997: Enforce mfd_add_devices() return value check mfd: mc13xxx: Simplify probe() & remove() ...
2014-01-21ASoC: fsl_ssi: Do not print 'baud clock' error message all the timeFabio Estevam1-1/+1
Currently everytime we get the following message on boot: fsl-ssi-dai 202c000.ssi: could not get baud clock: -2 This is not really useful information to get on every boot, so make it a debug message instead. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-21ASoC: fsl_ssi: We do support master mode nowFabio Estevam1-6/+1
Since commit aafa85e71a (ASoC: fsl_ssi: Add DAI master mode support for SSI on i.MX series) master mode is supported, so update the comments and code to reflect that. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-21mfd: mc13xxx: Remove useless symbol MFD_MC13783Alexander Shiyan1-1/+1
Symbol MFD_MC13783 always selected by MFD_MC13XXX, so no need to keep additional symbol. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-16Merge remote-tracking branches 'asoc/topic/adsp', 'asoc/topic/atmel', 'asoc/topic/bcm2835', 'asoc/topic/docs', 'asoc/topic/fsl', 'asoc/topic/generic', 'asoc/topic/kirkwood', 'asoc/topic/mc13783', 'asoc/topic/mxs', 'asoc/topic/nuc900', 'asoc/topic/sai', 'asoc/topic/sh', 'asoc/topic/ssm2602', ↵Mark Brown10-204/+1577
'asoc/topic/tlv320aic3x', 'asoc/topic/twl4030', 'asoc/topic/ux500', 'asoc/topic/width' and 'asoc/topic/x86' into for-tiwai
2014-01-16Merge remote-tracking branch 'asoc/topic/pcm' into for-tiwaiMark Brown2-4/+2
2014-01-14ASoC: fsl: Don't mix SNDRV_PCM_RATE_CONTINUOUS with specific ratesLars-Peter Clausen2-4/+2
SNDRV_PCM_RATE_CONTINUOUS means that all rates (possibly limited to a certain interval) are supported. There is no need to manually set other rate bits. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-10ASoC: fsl_esai: Add ESAI CPU DAI driverNicolin Chen4-0/+1174
This patch implements a device-tree-only CPU DAI driver for Freescale ESAI controller that supports: - 12 channels playback and 8 channels record. [ Some of the inner transmitters and receivers are sharing same group of pins. So the maxmium 12 output or 8 input channels are only valid if there is no pin conflict occurring to it. ] - Independent (asynchronous mode) or shared (synchronous mode) transmit and receive sections with separate or shared internal/external clocks and frame syncs, operating in Master or Slave mode. [ Current ALSA seems not to allow CPU DAI drivers to configure DAI format separately for PLAYBACK and CAPTURE. So this first version only supports the case that uses the same DAI format for both directions. ] - Various DAI formats: I2S, Left-Justified, Right-Justified, DSP-A and DSP-B. - Programmable word length (8, 16, 20 or 24bits) - Flexible selection between system clock or external oscillator as input clock source, programmable internal clock divider and frame sync generation. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-09ASoC: fsl_ssi: Set default slot number for common casesNicolin Chen1-0/+11
For those platforms using DAI master mode like I2S, it's better to pre-set a default slot number so that there's no need for these common cases to set the slot number from its machine driver any more. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-09ASoC: fsl-ssi: Add missing clk_disable_unprepare() on error in fsl_ssi_probe()Wei Yongjun1-1/+1
Add the missing clk_disable_unprepare() before return from fsl_ssi_probe() in the request irq error handling case. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-09ASoC: fsl-ssi: Fix stats compile warningMarkus Pargmann1-1/+1
single_open requires a function with signature 'int (*)(struct seq_file *, void *)'. This patch fixes the warning by fixing the wrong return type of fsl_ssi_stats_show. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-08ASoC: fsl-ssi: Drop ac97 specific trigger functionMarkus Pargmann1-53/+8
The normal trigger function can now be used for AC97. Drop AC97 trigger function. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-08ASoC: fsl-ssi: Move RX/TX configuration to seperate functionsMarkus Pargmann1-43/+46
This patch defines the appropriate register values for different oparation modes and IP versions. We have to handle DMA/FIQ, AC97, DEBUG-IRQs and offline/online configuration support. With this patch we cleanup some driver code that was not reference manual conform and try to cleanup the whole trigger function to seperate the actual register values from the enable/disable logic, which is now hidden in fsl_ssi_config helpers. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-08ASoC: fsl-ssi: Add configuration helper functionsMarkus Pargmann1-0/+122
This patch adds a struct 'fsl_ssi_rxtx_reg_val' which holds register values necessary to enable rx/tx. Based on those preset register values, the added configuration functions will cleanly enable/disable different parts of the SSI IP while supporting online/offline configuration. Different operating modes can be setup directly as different register values in fsl_ssi_reg_val. These functions and structs will help to cleanup and simplify the trigger function to support many different IP versions (online/offline configuration) and different operating modes. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-08ASoC: fsl-ssi: Add offline_config flagMarkus Pargmann1-0/+27
imx50-ssi and later versions of this IP support online reconfiguration of all registers. The reference manual does not list any registers that can only be configured while the SSI unit is disabled. This patch introduces the flag for later use. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-08ASoC: fsl-ssi: Fix interrupt stats for imxMarkus Pargmann1-8/+32
irqs should only be requested/released with enabled DMA. Previously interrupt statistics where disabled for IMX Processors because of different writeable SISR bits. This patch introduces support for irqstats on imx processors again by creating a sisr writeback mask and introducing a imx35-ssi compatible. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-08ASoC: fsl-ssi: Add imx51-ssi and of_device_id matchingMarkus Pargmann1-8/+24
There is a small but significant difference between imx21-ssi and imx51-ssi and above. imx21-ssi does not allow online reconfiguration of some registers. They have to be configured at the beginning. imx51-ssi has to reconfigure the SSI unit while it is running. Otherwise it would not be possible to have two streams in parallel. The new SDMA unit in imx51 and above has to be configured before the first DMA request arrives. Therefor we need to setup TDMAE/RDMAE just before starting the stream. This patch introduces distinct imx51-ssi as compatible and adds of_device_id matching in the probe function. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-08ASoC: fsl-ssi: Move sysfs stats to debugfsMarkus Pargmann1-67/+117
Interrupt statistics of fsl_ssi are mainly for debugging purpose. Most of those interrupts show error states, e.g. under/overflow. The stats should be exposed via debugfs instead of sysfs. This patch moves the statistics file to debugfs. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-08ASoC: fsl-ssi: Fix probe error handlingMarkus Pargmann1-4/+12
This patch fixes the error handling in the fsl-ssi probe function. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-08ASoC: fsl-sai: Clean up the codeXiubo Li1-4/+3
Makes the code slightly shorter. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07ASoC: fsl: Don't set unused struct snd_pcm_hardware fieldsLars-Peter Clausen4-17/+0
The ASoC core assumes that the PCM component of the ASoC card transparently moves data around and does not impose any restrictions on the memory layout or the transfer speed. It ignores all fields from the snd_pcm_hardware struct for the PCM driver that are related to this. Setting these fields in the PCM driver might suggest otherwise though, so rather not set them. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07ASoC: fsl: fsl_ssi: Use '%ld' to print 'long int'Fabio Estevam1-1/+1
Commit 6873ee464a (ASoC: fsl_ssi: Fix printing return code on clk error) caused the following build warning: sound/soc/fsl/fsl_ssi.c: In function 'fsl_ssi_probe': sound/soc/fsl/fsl_ssi.c:1196:6: warning: format '%d' expects argument of type 'int', but argument 3 has type 'long int' [-Wformat] Fix it by using '%ld' to print the 'long int' format. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-06ASoC: fsl_ssi: Fix printing return code on clk errorAlexander Shiyan1-1/+2
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-02Merge remote-tracking branches 'asoc/topic/ad1836', 'asoc/topic/ad193x', 'asoc/topic/adav80x', 'asoc/topic/adsp', 'asoc/topic/ak4641', 'asoc/topic/ak4642', 'asoc/topic/arizona', 'asoc/topic/atmel', 'asoc/topic/au1x', 'asoc/topic/axi', 'asoc/topic/bcm2835', 'asoc/topic/blackfin', ↵Mark Brown13-139/+918
'asoc/topic/cs4271', 'asoc/topic/cs42l52', 'asoc/topic/da7210', 'asoc/topic/davinci', 'asoc/topic/ep93xx', 'asoc/topic/fsl', 'asoc/topic/fsl-mxs', 'asoc/topic/generic', 'asoc/topic/hdmi', 'asoc/topic/jack', 'asoc/topic/jz4740', 'asoc/topic/max98090', 'asoc/topic/mxs', 'asoc/topic/omap', 'asoc/topic/pxa', 'asoc/topic/rcar', 'asoc/topic/s6000', 'asoc/topic/sai', 'asoc/topic/samsung', 'asoc/topic/sgtl5000', 'asoc/topic/spear', 'asoc/topic/ssm2518', 'asoc/topic/ssm2602', 'asoc/topic/tegra', 'asoc/topic/tlv320aic3x', 'asoc/topic/twl6040', 'asoc/topic/txx9', 'asoc/topic/uda1380', 'asoc/topic/width', 'asoc/topic/wm8510', 'asoc/topic/wm8523', 'asoc/topic/wm8580', 'asoc/topic/wm8711', 'asoc/topic/wm8728', 'asoc/topic/wm8731', 'asoc/topic/wm8741', 'asoc/topic/wm8750', 'asoc/topic/wm8753', 'asoc/topic/wm8776', 'asoc/topic/wm8804', 'asoc/topic/wm8900', 'asoc/topic/wm8901', 'asoc/topic/wm8940', 'asoc/topic/wm8962', 'asoc/topic/wm8974', 'asoc/topic/wm8985', 'asoc/topic/wm8988', 'asoc/topic/wm8990', 'asoc/topic/wm8991', 'asoc/topic/wm8994', 'asoc/topic/wm8995', 'asoc/topic/wm9081' and 'asoc/topic/x86' into asoc-next
2014-01-02Merge remote-tracking branch 'asoc/fix/fsl' into asoc-linusMark Brown2-64/+21
2013-12-31ASoC: imx-spdif: Use snd-soc-dummy CODEC driver to link cardNicolin Chen2-64/+21
This is a quick fix for the below two issues when building spdif as modules. 1) If modprobing modules in order: (Step 1) snd-soc-fsl-spdif -> (Step 2) snd-soc-imx-spdif -> (Step 3) snd-soc-spdif-tx/rx, we will fail to create imx-spdif card and dai link unless we rmmod snd-soc-imx-spdif and modprobe it again due to the execution platform_driver_unregister() in probe() when meeting -EPROBE_DEFER at Step 2. 2) After "imx-spdif sound-spdif.17: dit-hifi <-> 2004000.spdif mapping ok", 'rmmod snd-soc-imx-spdif' would cause kernel dump with warning: WARNING: CPU: 0 PID: 1301 at /home/rmk/git/linux-rmk/fs/sysfs/dir.c:915 sysfs_hash_and_remove+0x84/0x90() sysfs: can not remove 'dapm_widget', no directory This should be caused by disordered resourse releasing of the whole link. And trying to unregister the card and then CODEC dev can't fix this issue. Thus this patch just provides a simple fix to these two bugs by using the snd-soc-dummy in the core instead of seperate snd-soc-spdif-tx/rx so that there's no need to handle the registering and unregistering of CODEC or CODEC dai any more. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-31ASoC: fsl_sai: fix the endianess for SAI fifo data.Xiubo Li1-4/+4
Revert the SAI's endianess for fifo data to/from DMA engine. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-31ASoC: fsl_sai: Fix one bug for hardware limitation.Xiubo Li1-5/+10
This is maybe one bug or a limitation of the hardware that the {T,R}CR2's Synchronous Mode bits must be set as late as possible, or the SAI device maybe hanged up, and there has not any explaination about this limitation in the SAI Data Sheet. And the {T,R}CR2's Synchronous Mode bits must be set at the same time whether for Tx or Rx stream. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-30ASoC: fsl_sai: Add disable operation for the corresponding data channel.Xiubo Li1-8/+13
Enables/Disables the corresponding data channel for tx/rx operation. A channel must be enabled before its FIFO is accessed, and then disable it when tx/rx is stopped or idle. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-30ASoC: fsl_sai: Move the global registers setting to _dai_probe()Xiubo Li1-5/+12
Because we cannot make sure which one of _dai_fmt() and _dai_sysclk() will be firstly called. So move the RCSR/TCSR and TCR1/RCR1's initialization to _dai_probe(), and this can make sure that before any of {T,R}CR{1~5} register to be set the RCSR/TCSR's RE/TE bit has been cleared for the hareware limitation. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-21ASoC: fsl_sai: Sort local variable in general wayNicolin Chen1-7/+7
Generally we would write code for local variable like: static new_func() { struct xxx *yyy; ... int ret; } But this driver only follows this pattern for some functions, not all. Thus this patch sorts the local variable in the general way. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Reviewed-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-21ASoC: fsl_sai: Make dev_err information neaterNicolin Chen1-12/+4
Since using dev_err() there's no need to mention SAI any more, it will print the full name of the driver -- fsl_sai. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Reviewed-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-21ASoC: fsl_sai: Drop useless ret in startup()Nicolin Chen1-4/+1
We can save this ret to make the code neater. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Reviewed-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-21ASoC: fsl_sai: Drop useless channels check in hw_params()Nicolin Chen1-4/+1
SAi only supports two data channels on hardware level and the driver also does register the min->1 and max->2, so no need to check channels. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Reviewed-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-21ASoC: fsl_sai: Use snd_pcm_format_width()Nicolin Chen1-15/+2
Use common helper function snd_pcm_format_width() to make code neater. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Reviewed-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-21ASoC: fsl_sai: Keep symmetry for clk_enable() and clk_disable()Nicolin Chen1-6/+8
There are two functions haven't clk_disable_unprepare() if having error. Thus fix them. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Reviewed-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-21ASoC: fsl-sai: Use snd_soc_dai_init_dma_data()Xiubo Li1-2/+2
Makes the code slightly shorter Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-21ASoC: fsl-sai: Use devm_snd_dmaengine_pcm_register()Xiubo Li1-14/+1
Makes the code slightly shorter Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-21ASoC: fsl-sai: Remove fsl_sai_remove()Xiubo Li1-11/+0
There is no need of this function and makes the code slightly shorter Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-19ASoC: fsl_ssi: Add DAI master mode support for SSI on i.MX seriesNicolin Chen2-4/+278
This patch adds three main functions for DAI master mode: set_dai_fmt(), set_dai_sysclk() and set_dai_tdm_slot(), and one essential baud clock accordingly. After appending this patch, the fsl_ssi driver on i.MX series has the ability to derive LRCLK and BCLK from baud clock source so as to support some audio Codecs which can only be used in slave mode. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-19ASoC: fsl/mxs: Remove unnecessarily gendered languageMatthew Garrett1-1/+1
The kernel as a number of cases of gendered language. The majority of these refer to objects that don't have gender in English, and so I've replaced them with "it" and "its". Some refer to people (developers or users), and I've replaced these with the singular "they" variant. Some are simply typos that I've fixed up. I've left cases where gendered language was used to refer to specific individuals, was a quote or is part of license text. Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-18ASoC: Add SAI SoC Digital Audio Interface driver.Xiubo Li4-1/+613
This adds Freescale SAI ASoC Audio support. This implementation is only compatible with device tree definition. Features: o Supports playback/capture o Supports 16/20/24 bit PCM o Supports 8k - 96k sample rates o Supports master and slave mode. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-18ASoC: fsl/mxs: Remove unnecessarily gendered languageMark Brown1-1/+1
The kernel as a number of cases of gendered language. The majority of these refer to objects that don't have gender in English, and so I've replaced them with "it" and "its". Some refer to people (developers or users), and I've replaced these with the singular "they" variant. Some are simply typos that I've fixed up. I've left cases where gendered language was used to refer to specific individuals, was a quote or is part of license text. Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-16ASoC: fsl_ssi: Add dual fifo mode supportNicolin Chen1-1/+26
By enabling dual fifo mode, it would allow SSI enter a better performance to transimit/receive data without occasional hardware underrun/overrun. Signed-off-by: Nicolin Chen <b42378@freescale.com> Acked-by: Timur Tabi <timur@tabi.org> Acked-by: Mark Brown <broonie@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-12-12Merge remote-tracking branches 'asoc/fix/atmel', 'asoc/fix/fsl', 'asoc/fix/tegra' and 'asoc/fix/wm8962' into asoc-linusMark Brown1-2/+0
2013-12-09ASoC: fsl: imx-wm8962: Don't update bias_level in machine driverNicolin Chen1-2/+0
If we update it here, the set_bias_level() of Codec driver won't be normally called and we will then miss some essential procedures in set_bias_level() of the Codec driver. Thus drop it. Signed-off-by: Nicolin Chen <b42378@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-05ASoC: imx-ssi: Check the return value from clk_prepare_enable()Fabio Estevam1-1/+3
clk_prepare_enable() may fail, so let's check its return value and propagate it in the case of error. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-03Merge remote-tracking branches 'asoc/fix/arizona', 'asoc/fix/atmel', 'asoc/fix/fsl', 'asoc/fix/kirkwood', 'asoc/fix/omap', 'asoc/fix/rcar', 'asoc/fix/wm8731' and 'asoc/fix/wm8990' into asoc-linusMark Brown1-1/+2
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.