aboutsummaryrefslogtreecommitdiffstats
path: root/sound/soc/sh (follow)
AgeCommit message (Collapse)AuthorFilesLines
2012-02-09ASoC: fsi: fixup fsi_pointer() calculation methodKuninori Morimoto1-5/+1
current fsi_pointer() calculation was not correct for FSI driver. This patch fix it up. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-17Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-2/+2
* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (53 commits) ARM: mach-shmobile: specify CHCLR registers on SH7372 dma: shdma: fix runtime PM: clear channel buffers on reset dma/imx-sdma: save irq flags when use spin_lock in sdma_tx_submit dmaengine/ste_dma40: clear LNK on channel startup dmaengine: intel_mid_dma: remove legacy pm interface ASoC: mxs: correct 'direction' of device_prep_dma_cyclic dmaengine: intel_mid_dma: error path fix dmaengine: intel_mid_dma: locking and freeing fixes mtd: gpmi-nand: move to dma_transfer_direction mtd: fix compile error for gpmi-nand mmc: mxs-mmc: fix the dma_transfer_direction migration dmaengine: add DMA_TRANS_NONE to dma_transfer_direction dma: mxs-dma: Don't use CLKGATE bits in CTRL0 to disable DMA channels dma: mxs-dma: make mxs_dma_prep_slave_sg() multi user safe dma: mxs-dma: Always leave mxs_dma_init() with the clock disabled. dma: mxs-dma: fix a typo in comment DMA: PL330: Remove pm_runtime_xxx calls from pl330 probe/remove video i.MX IPU: Fix display connections i.MX IPU DMA: Fix wrong burstsize settings dmaengine/ste_dma40: allow fixed physical channel ... Fix up conflicts in drivers/dma/{Kconfig,mxs-dma.c,pl330.c} The conflicts looked pretty trivial, but I'll ask people to verify them.
2011-12-23ASoC: sh: Add .owner to struct snd_soc_cardAxel Lin5-0/+5
Add missing .owner of struct snd_soc_card. This prevents the module from being removed from underneath its users. Reported-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-15ASoC: Use core pm_runtime callbacks for fsiMark Brown1-4/+0
Now that the core holds a pm_runtime reference to the device while the link is active there is no need for the driver to do so. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-15ASoC: Use core pm_runtime callbacks for siu_daiMark Brown1-6/+0
Now that the core holds a pm_runtime reference to the device while the link is active there is no need for the driver to do so. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-14ASoC: Remove unused extern declarations for sh4_hac_dai and sh7760_soc_platformAxel Lin1-4/+0
Both sh4_hac_dai and sh7760_soc_platform are changed to static by multi-component patch and they are not used in sh7760-ac97.c now. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-25ASoC: Convert sh directory to module_platform_driverAxel Lin7-81/+7
Factor out some boilerplate code. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-24ASoC: fsi-ak4642: modify specification method of FSI / ak464xKuninori Morimoto1-103/+11
Current fsi-ak4642 was using id_entry name in order to specify FSI port and ak464x codec. But it was no sense, no flexibility. Platform can specify FSI/ak464x pair by this patch. Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-23ASoC: Constify snd_soc_dai_ops structsLars-Peter Clausen4-4/+4
Commit 1ee46ebd("ASoC: Make the DAI ops constant in the DAI structure") introduced the possibility to have constant DAI ops structures, yet this is barley used in both existing drivers and also new drivers being submitted, although none of them modifies its DAI ops structure. The later is not surprising since existing drivers are often used as templates for new drivers. So this patch just constifies all existing snd_soc_dai_ops structs to eliminate the issue altogether. The patch was generated with the following coccinelle semantic patch: // <smpl> @@ identifier ops; @@ -struct snd_soc_dai_ops ops = +const struct snd_soc_dai_ops ops = { ... }; // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-17Merge branch 'dma_slave_direction' into next_test_dirnVinod Koul1-2/+2
resolved conflicts: drivers/media/video/mx3_camera.c
2011-11-08ASoC: fsi: add valid data position control supportKuninori Morimoto1-0/+15
FSI2 can control valid data position, like package in front/back or stream mode (16bit x 2). But current fsi driver is assuming it was in-back. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-08ASoC: fsi: fixup compile warningKuninori Morimoto1-3/+3
This patch fixup below warning ${linux}/sound/soc/sh/fsi.c:442:3:\ warning: passing argument 1 of '__fsi_reg_read' makes pointer\ from integer without a cast ${linux}/sound/soc/sh/fsi.c:517:3: \ warning: passing argument 1 of '__fsi_reg_write' makes pointer\ from integer without a cast ${linux}/sound/soc/sh/fsi.c:663:3: \ warning: passing argument 1 of '__fsi_reg_mask_set' makes pointer\ from integer without a cast Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-31sound: Add module.h to the previously silent sound usersPaul Gortmaker5-0/+5
Lots of sound drivers were getting module.h via the implicit presence of it in <linux/device.h> but we are going to clean that up. So fix up those users now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31sound-soc: move to dma_transfer_directionVinod Koul1-2/+2
fixup usage of dma direction by introducing dma_transfer_direction, this patch moves asoc drivers to use new enum Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com> Cc: Liam Girdwood <lrg@ti.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-27Merge branch 'topic/asoc' into for-linusTakashi Iwai3-13/+6
2011-10-08ASoC: Remove redundant snd_soc_dapm_sync() calls from machine driversMark Brown1-7/+0
The core will sync DAPM as part of the card initialization, there is no need for machine drivers to do so during their setup. OMAP drivers are omitted as I know Peter already has patches for them. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-02ASoC: sh: use correct __iomem annotationsArnd Bergmann1-5/+5
This removes a few unnecessary type casts and avoids sparse warnings. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-02ASoC: Staticise sh4_ssi_daiAxel Lin1-1/+1
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-22sound: irq: Remove IRQF_DISABLEDYong Zhang1-1/+1
Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled], We run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled (see commit [b738a50a: genirq: Warn when handler enables interrupts]). So now this flag is a NOOP and can be removed. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-09Merge branch 'for-3.0' into for-3.1Mark Brown3-11/+11
2011-07-09ASoC: sh: fsi-hdmi: fixup snd_soc_card nameKuninori Morimoto1-2/+2
it shouldn't contain space letters and special letters like parentheses. aplay will be "Segmentation fault" without this patch special thanks to Takashi. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-09ASoC: sh: fsi-da7210: fixup snd_soc_card nameKuninori Morimoto1-1/+1
it shouldn't contain space letters and special letters like parentheses. aplay will be "Segmentation fault" without this patch. special thanks to Takashi. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-09ASoC: sh: fsi-ak4642: fixup snd_soc_card nameKuninori Morimoto1-8/+8
it shouldn't contain space letters and special letters like parentheses. aplay will be "Segmentation fault" without this patch. special thanks to Takashi. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-07ASoC: core - Optimise and refactor pcm_new() to pass only rtdLiam Girdwood3-8/+9
Currently pcm_new() passes in 3 arguments :- card, pcm and DAI. Refactor this to only pass in 1 argument (i.e. the rtd) since struct rtd contains card, pcm and DAI along with other members too that are useful too. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24ASoC: sh: fsi: add fsi_hw_startup/shutdownKuninori Morimoto1-14/+29
This patch is preparation of cleanup suspend/resume patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24ASoC: sh: fsi: cleanup suspend/resumeKuninori Morimoto1-55/+42
Current FSI driver was using saved_xxx variable for suspend/resume. OTOH, the start and stop of power/clock are controlled by fsi_hw_startup/fsi_hw_shutdown in current FSI driver. The all necessary registers value are set by fsi_hw_startup. So, if fsi_hw_shutdown is called when "suspend" is generated, and fsi_hw_startup is called at "resume", the saved_xxx are not needed. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24ASoC: sh: fsi: remove fsi_module_init/killKuninori Morimoto1-30/+0
FSIA/B ports is enabled by default when power-on, and current FSI is supporting RuntimePM. In addition, current fsi_module_init/kill doesn't care simultaneous playback/recorde. This mean FSI port control is not needed. This patch remove fsi_module_init/kill Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24ASoC: sh: fsi: make sure fsi_stream_push/pop access by spin lockKuninori Morimoto1-0/+8
fsi_stream_push/pop might be called in same time. This patch protect it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24ASoC: sh: fsi: remove pm_runtime from fsi_dai_set_fmt.Kuninori Morimoto1-20/+32
pm_runtime_get/put_sync were used to access FSI register in fsi_dai_set_fmt which is called when ALSA probe. But this register value will disappear after pm_runtime_put_sync if platform is supporting RuntimePM. To solve this issue, this patch adds new variable for format, and remove pm_runtime_get/put_sync from fsi_dai_set_fmt. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24ASoC: sh: fsi: tidyup unclear variable namingKuninori Morimoto1-82/+100
Some variables on this driver were a unclear naming, and were different unit (byte, frame, sample). And some functions had wrong name (ex. it returned "sample width" but name was "fsi_get_frame_width"). This patch tidy-up this issue, and the minimum unit become "sample". Special thanks to Takashi YOSHII. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24ASoC: sh: fsi: irq control moves to fsi_port_start/stopKuninori Morimoto1-10/+10
Using fsi_irq_enable/disable in fsi_port_start/stop is very natural. This patch is preparation of cleanup suspend/resume patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24ASoC: sh: fsi: add fsi_set_master_clkKuninori Morimoto1-77/+87
Current FSI driver is using set_rate call back function which is for master mode. By this patch, it is used from fsi_set_master_clk. This patch is preparation of cleanup suspend/resume patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-24ASoC: sh: fsi: tidyup parameter of fsi_stream_pushKuninori Morimoto1-9/+5
It is possible to create buff_len and period_len from substream->runtime. This patch is preparation of tidyup unclear variable naming patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-26ASoC: sh: fsi: Add module/port clock control functionKuninori Morimoto1-31/+50
The FIFO of each port were always working though it was not used in current FSI driver. This patch add module/port clock control function for fixing it. This patch is also caring suspend/resume. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Simon Horman <simon@horms.net> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-26ASoC: sh: fsi: add dev_pm_ops :: suspend/resumeKuninori Morimoto1-0/+86
Current FSI driver sets important settings when probing. And it are not set again as long as driver is not bind again. This mean FSI driver will lost it from register if suspend/resume are happen. This patch save important settings for suspend/resume. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Simon Horman <simon@horms.net> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-26ASoC: sh: fsi: add fsi_is_clk_master functionKuninori Morimoto1-8/+25
If FSI port is clock master, it use set_rate function which is callback from platform, and it is not necessary to call it if FSI port is clock slave. Current FSI driver called this callback if platform provide it. This patch modify it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Simon Horman <simon@horms.net> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-18ASoC: add a module alias to the FSI driverGuennadi Liakhovetski1-0/+1
This patch enables FSI driver autoloading on sh-mobile systems. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Reviewed-by: Simon Horman <horms@verge.net.au Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-11ASoC: fsi: driver safely remove for against irqKuninori Morimoto1-4/+3
free_irq and pm_runtime_disable should be called before snd_soc_unregister_xxx Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-11ASoC: fsi: modify vague PM control on probeKuninori Morimoto1-1/+2
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-11ASoC: fsi: take care in failing case of dai registerKuninori Morimoto1-1/+10
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-26ASoC: sh: fsi: modify selection method of I2S/PCM/SPDIF formatKuninori Morimoto3-53/+59
Current format selection of FSI-codecs depended on platform information for FSI, and chip default settings for codecs. It is not understandable/formal method. This patch modify FSI and FSI-codecs to use snd_soc_dai_set_fmt. But FSI can use I2S/PCM and SPDIF format today. It can be selected to I2S/PCM by snd_soc_dai_set_fmt, but can not select SPDIF. So, this patch change FSI platform information to have DAI/SPDIF mode. If platform selects DAI mode (default), FSI-codecs can select I2S/PCM by snd_soc_dai_set_fmt, and if it is SPDIF mode, FSI become SPDIF format. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-26ASoC: sh: fsi: free from NULL pointer of struct sh_fsi_platform_infoKuninori Morimoto1-4/+17
Current FSI driver assumed master->info is not NULL. This patch allow NULL in master->info Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-26ASoC: sh: fsi: move chan_num from fsi_stream to fsi_privKuninori Morimoto1-19/+15
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-25ASoC: sh: fsi-hdmi: Add FSI port and HDMI selectionKuninori Morimoto1-5/+61
This patch add platform_device_id which can control PortA/PortB for FSI2-HDMI from platform data. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-21ASoC: sh: fsi: Add snd_soc_dai_set_fmt supportKuninori Morimoto4-29/+61
This patch add snd_soc_dai_ops :: set_fmt to FSI driver and select master/slave clock mode by snd_soc_dai_set_fmt on fsi-xxx.c instead of platform infomation code. This patch remove fsi_is_master function which is no longer needed. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-21ASoC: sh: fsi: Add fsi_get_priv_frm_dai functionKuninori Morimoto1-2/+6
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-21ASoC: ak4642: add SND_SOC_DAIFMT_FORMAT supportKuninori Morimoto1-1/+2
This patch support LEFT_J / I2S only for now Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-13Merge branch 'for-2.6.38' into for-2.6.39Mark Brown1-1/+1
2011-01-12ASoC: sh: fsi-ak4642: fixup platform device idKuninori Morimoto1-1/+10
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-11ASoC: fix migor audio buildGuennadi Liakhovetski1-1/+1
Commit 6d803ba736abb5e122dede70a4720e4843dd6df4 "ARM: 6483/1: arm & sh: factorised duplicated clkdev.c" broke compilation of migor audio. Use the correct header to fix the problem. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.