aboutsummaryrefslogtreecommitdiffstats
path: root/sound/usb/line6 (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-09-25sound: line6: move to use usb_control_msg_send() and usb_control_msg_recv()Greg Kroah-Hartman3-60/+44
The usb_control_msg_send() and usb_control_msg_recv() calls can return an error if a "short" write/read happens, and they can handle data off of the stack, so move the driver over to using those calls instead, saving some logic when dynamically allocating memory. v2: API change of use usb_control_msg_send() and usb_control_msg_recv() Cc: Jaroslav Kysela <perex@perex.cz> Cc: Vasily Khoruzhick <anarsoul@gmail.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20200914153756.3412156-9-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20200923134348.23862-13-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-25Revert "sound: line6: move to use usb_control_msg_send() and usb_control_msg_recv()"Oliver Neukum3-37/+57
This reverts commit f7ef7614f89e943d7511ee121b0b849f27b60cb2. The API has to be changed. Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20200923134348.23862-5-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-16sound: line6: move to use usb_control_msg_send() and usb_control_msg_recv()Greg Kroah-Hartman3-57/+37
The usb_control_msg_send() and usb_control_msg_recv() calls can return an error if a "short" write/read happens, and they can handle data off of the stack, so move the driver over to using those calls instead, saving some logic when dynamically allocating memory. Cc: Jaroslav Kysela <perex@perex.cz> Cc: Vasily Khoruzhick <anarsoul@gmail.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20200914153756.3412156-9-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-03Merge branch 'for-next' into for-linusTakashi Iwai3-4/+132
2020-07-17ALSA: line6: Use kmemdup in podhd_set_monitor_level()YueHaibing1-3/+1
Use kmemdup rather than duplicating its implementation. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20200717081710.39180-1-yuehaibing@huawei.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-07-13ALSA: line6: add hw monitor volume control for POD HD500Vasily Khoruzhick3-2/+132
Add hw monitor volume control for POD HD500. The same change may work for HD500X but I don't have it to test. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Link: https://lore.kernel.org/r/20200713152852.65832-1-anarsoul@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-07-10ALSA: line6: Sync the pending work cancel at disconnectionTakashi Iwai1-1/+1
Recently syzkaller reported a UAF in LINE6 driver, and it's likely because we call cancel_delayed_work() at the disconnect callback instead of cancel_delayed_work_sync(). Let's use the correct one instead. Reported-by: syzbot+145012a46658ac00fc9e@syzkaller.appspotmail.com Suggested-by: Alan Stern <stern@rowland.harvard.edu> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/s5hlfjr4gio.wl-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-07-10ALSA: line6: Perform sanity check for each URB creationTakashi Iwai2-0/+4
LINE6 drivers create stream URBs with a fixed pipe without checking its validity, and this may lead to a kernel WARNING at the submission when a malformed USB descriptor is passed. For avoiding the kernel warning, perform the similar sanity checks for each pipe type at creating a URB. Reported-by: syzbot+c190f6858a04ea7fbc52@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/s5hv9iv4hq8.wl-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-07-08ALSA: usb/line6: remove 'defined but not used' warningPierre-Louis Bossart1-2/+2
Fix W=1 warning. Variables are declared in a header file included from multiple C files, replace by #defines as suggested by Takashi sound/usb/line6/driver.h:70:18: warning: ‘SYSEX_EXTRA_SIZE’ defined but not used [-Wunused-const-variable=] 70 | static const int SYSEX_EXTRA_SIZE = sizeof(line6_midi_id) + 4; | ^~~~~~~~~~~~~~~~ sound/usb/line6/driver.h:69:18: warning: ‘SYSEX_DATA_OFS’ defined but not used [-Wunused-const-variable=] 69 | static const int SYSEX_DATA_OFS = sizeof(line6_midi_id) + 3; | ^~~~~~~~~~~~~~ Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200707184924.96291-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-05-28Merge branch 'for-linus' into for-nextTakashi Iwai1-17/+5
Back-merge 5.7-devel branch for further development. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-05-02ALSA: line6: Add poll callback for hwdepVasily Khoruzhick1-0/+16
At least POD HD500 uses message-based communication, both sides can send messages. Add poll callback so application can wait for device messages without using busy loop. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Link: https://lore.kernel.org/r/20200502193120.79115-3-anarsoul@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-05-02ALSA: line6: hwdep: add support for O_NONBLOCK opening modeVasily Khoruzhick2-0/+5
Currently line6 hwdep interface ignores O_NONBLOCK flag when opening device and it renders it somewhat useless when using poll. Check for O_NONBLOCK flag when opening device and don't block read() if it is set. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Link: https://lore.kernel.org/r/20200502193120.79115-2-anarsoul@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-04-26ALSA: line6: Fix POD HD500 audio playbackVasily Khoruzhick1-17/+5
Apparently interface 1 is control interface akin to HD500X, setting LINE6_CAP_CONTROL and choosing it as ctrl_if fixes audio playback on POD HD500. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200425201115.3430-1-anarsoul@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-03-09ALSA: line6: Fix endless MIDI read loopTakashi Iwai2-2/+2
The MIDI input event parser of the LINE6 driver may enter into an endless loop when the unexpected data sequence is given, as it tries to continue the secondary bytes without termination. Also, when the input data is too short, the parser returns a negative error, while the caller doesn't handle it properly. This would lead to the unexpected behavior as well. This patch addresses those issues by checking the return value correctly and handling the one-byte event in the parser properly. The bug was reported by syzkaller. Reported-by: syzbot+cce32521ee0a824c21f7@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/000000000000033087059f8f8fa3@google.com Link: https://lore.kernel.org/r/20200309095922.30269-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-01-03ALSA: line6: Constify snd_ratden definitionsTakashi Iwai3-3/+3
The snd_ratden definitions used in line6 drivers are all read-only, so they can be marked as const. There should be no functional changes by this patch. Link: https://lore.kernel.org/r/20200103081714.9560-51-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-12-11ALSA: usb: Drop superfluous ioctl PCM opsTakashi Iwai2-2/+0
PCM core deals the empty ioctl field now as default(*). Let's kill the redundant lines. (*) commit fc033cbf6fb7 ("ALSA: pcm: Allow NULL ioctl ops") Link: https://lore.kernel.org/r/20191210061145.24641-22-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-12-11ALSA: line6: Use managed buffer allocationTakashi Iwai1-10/+3
Clean up the drivers with the new managed buffer allocation API. The superfluous snd_pcm_lib_malloc_pages() and snd_pcm_lib_free_pages() calls are dropped. Link: https://lore.kernel.org/r/20191209094943.14984-68-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-06ALSA: usb: Remove superfluous snd_dma_continuous_data()Takashi Iwai1-3/+1
The recent change (commit 08422d2c559d: "ALSA: memalloc: Allow NULL device for SNDRV_DMA_TYPE_CONTINUOUS type") made the PCM preallocation helper accepting NULL as the device pointer for the default usage. Drop the snd_dma_continuous_data() usage that became superfluous from the callers. Link: https://lore.kernel.org/r/20191105151856.10785-7-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-08-22Merge branch 'topic/usb-validation' into for-nextTakashi Iwai1-9/+9
Pull USB validation patches. It's based on the latest 5.3 development branch, so we shall catch up the whole things. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-08-21ALSA: line6: Fix memory leak at line6_init_pcm() error pathTakashi Iwai1-9/+9
I forgot to release the allocated object at the early error path in line6_init_pcm(). For addressing it, slightly shuffle the code so that the PCM destructor (pcm->private_free) is assigned properly before all error paths. Fixes: 3450121997ce ("ALSA: line6: Fix write on zero-sized buffer") Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-07-24ALSA: line6: sizeof (byte) is always 1, use that fact.Pavel Machek1-2/+2
sizeof (byte) is always 1, use that fact and make interesting code explicit. Signed-off-by: Pavel Machek <pavel@denx.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-07-22ALSA: line6: Fix a typoChristophe JAILLET1-1/+1
s/Vairax/Variax/ Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-07-18ALSA: line6: Fix wrong altsetting for LINE6_PODHD500_1Kai-Heng Feng1-1/+1
Commit 7b9584fa1c0b ("staging: line6: Move altsetting to properties") set a wrong altsetting for LINE6_PODHD500_1 during refactoring. Set the correct altsetting number to fix the issue. BugLink: https://bugs.launchpad.net/bugs/1790595 Fixes: 7b9584fa1c0b ("staging: line6: Move altsetting to properties") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-07-08Merge tag 'asoc-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linusTakashi Iwai17-80/+17
ASoC: Updates for v5.3 This is a very big update, mainly thanks to Morimoto-san's refactoring work and some fairly large new drivers. - Lots more work on moving towards a component based framework from Morimoto-san. - Support for force disconnecting muxes from Jerome Brunet. - New drivers for Cirrus Logic CS47L35, CS47L85 and CS47L90, Conexant CX2072X, Realtek RT1011 and RT1308. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-07-07Merge branch 'topic/hda-refresh-cleanup' into for-nextTakashi Iwai1-0/+5
Merge a cleanup for HD-audio widget refresh code Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-07-02ALSA: line6: Fix write on zero-sized bufferTakashi Iwai1-0/+5
LINE6 drivers allocate the buffers based on the value returned from usb_maxpacket() calls. The manipulated device may return zero for this, and this results in the kmalloc() with zero size (and it may succeed) while the other part of the driver code writes the packet data with the fixed size -- which eventually overwrites. This patch adds a simple sanity check for the invalid buffer size for avoiding that problem. Reported-by: syzbot+219f00fb49874dcaea17@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 372Thomas Gleixner16-80/+16
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 135 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531081036.435762997@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30Merge tag 'sound-5.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds3-12/+19
Pull sound fixes from Takashi Iwai: "No big surprises here, just a few device-specific fixes. HD-audio received several fixes for Acer, Dell, Huawei and other laptops as well as the workaround for the new Intel chipset. One significant one-liner fix is the disablement of the node-power saving on Realtek codecs, which may potentially cover annoying bugs like the background noises or click noises on many devices. Other than that, a fix for FireWire bit definitions, and another fix for LINE6 USB audio bug that was discovered by syzkaller" * tag 'sound-5.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: fireface: Use ULL suffixes for 64-bit constants ALSA: hda/realtek - Improve the headset mic for Acer Aspire laptops ALSA: line6: Assure canceling delayed work at disconnection ALSA: hda - Force polling mode on CNL for fixing codec communication ALSA: hda/realtek - Enable micmute LED for Huawei laptops ALSA: hda/realtek - Set default power save node to 0 ALSA: hda/realtek - Check headset type by unplug and resume
2019-05-28ALSA: line6: Use container_of()Takashi Iwai4-19/+25
... instead of unconditional cast. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-05-28ALSA: line6: Drop superfluous timer helper functionTakashi Iwai2-20/+0
Now all timer usages in line6 drivers are gone, we can get rid of some helper macro and function that became superfluous. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-05-28ALSA: line6: variax: Rewrite complex timer & work combo with a delayed workTakashi Iwai1-93/+35
Variax driver had a very complex and staged startup sequence using multiple timers and a work. This patch simplifies the procedure to a single delayed work. Now the startup stage consists of: - VARIAX_STARTUP_VERSIONREQ: requesting the version and the message handler raises up to the next stage upon receiving the reply. The request is repeated until a reply arrives. - VARIAX_STARTUP_ACTIVATE: does activation, and queue for the next stage. - VARIAX_STARTUP_SETUP: registers the card. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-05-28ALSA: line6: podhd: Rewrite complex timer & work combo with a delayed workTakashi Iwai1-66/+8
POD HD driver had a complex staged startup sequence with both timer and work. This patch simplifies it to a single delayed work with a single stage. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-05-28ALSA: line6: pod: Rewrite complex timer & work combo with a delayed workTakashi Iwai1-69/+27
The POD driver had a complex staged startup procedure using both timer and work. This patch simplifies it via a single delayed work with the reduced stages. Now basically only two intermediate stages: - POD_STARTUP_VERSIONREQ: requesting the version information and the process_message callback triggers the next stage, - POD_STARTUP_SETUP: registering the actual card object. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-05-28ALSA: line6: Assure canceling delayed work at disconnectionTakashi Iwai3-12/+19
The current code performs the cancel of a delayed work at the late stage of disconnection procedure, which may lead to the access to the already cleared state. This patch assures to call cancel_delayed_work_sync() at the beginning of the disconnection procedure for avoiding that race. The delayed work object is now assigned in the common line6 object instead of its derivative, so that we can call cancel_delayed_work_sync(). Along with the change, the startup function is called via the new callback instead. This will make it easier to port other LINE6 drivers to use the delayed work for startup in later patches. Reported-by: syzbot+5255458d5e0a2b10bbb9@syzkaller.appspotmail.com Fixes: 7f84ff68be05 ("ALSA: line6: toneport: Fix broken usage of timer for delayed execution") Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-09Merge tag 'sound-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds1-7/+9
Pull sound updates from Takashi Iwai: "The most significant changes at this cycle are the Sound Open Firmware support from Intel for the common DSP framework along with its support for Intel platforms. It's a door opened to a real "free" firmware (in the sense of FOSS), and other parties show interests in it. In addition to SOF, we've got a bunch of updates and fixes as usual. Some highlights are below. ALSA core: - Cleanups and fixes in ALSA timer code to cover some races spotted by syzkaller - Cleanups and fixes in ALSA sequencer code to cover some races, again unsurprisingly, spotted by syzkaller - Optimize the common page allocation helper with alloc_pages_exact() ASoC: - Add SOF core support, as well as Intel SOF platform support - Generic card driver improvements: support for MCLK/sample rate ratio and pin switches - A big set of improvements to TLV320AIC32x4 drivers - New drivers for Freescale audio mixers, several Intel machines, several Mediatek machines, Meson G12A, Spreadtrum compressed audio and DMA devices HD-audio: - A few Realtek codec fixes for reducing pop noises - Quirks for Chromebooks - Workaround for faulty connection report on AMD/Nvidia HDMI Others: - A quirk for Focusrite Scarlett Solo USB-audio - Add support for MOTU 8pre FireWire - 24bit sample format support in aloop - GUS patch format support (finally, over a decade) in native emux synth code" * tag 'sound-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (375 commits) ASoC: SOF: Fix unused variable warnings ALSA: line6: toneport: Fix broken usage of timer for delayed execution ALSA: aica: Fix a long-time build breakage ALSA: hda/realtek - Support low power consumption for ALC256 ASoC: stm32: i2s: update pcm hardware constraints ASoC: codec: hdac_hdmi: no checking monitor in hw_params ASoC: mediatek: mt6358: save PGA for mixer control ASoC: mediatek: mt6358: save output volume for mixer controls ASoC: mediatek: mt6358: initialize setting when ramping volume ASoC: SOF: core: fix undefined nocodec reference ASoC: SOF: xtensa: fix undefined references ASoC: SOF: Propagate sof_get_ctrl_copy_params() error properly ALSA: hdea/realtek - Headset fixup for System76 Gazelle (gaze14) ALSA: hda/intel: add CometLake PCI IDs ALSA: hda/realtek - Support low power consumption for ALC295 ASoC: rockchip: Fix an uninitialized variable compile warning ASoC: SOF: Fix a compile warning with CONFIG_PCI=n ASoC: da7219: Fix a compile warning at CONFIG_COMMON_CLK=n ASoC: sound/soc/sof/: fix kconfig dependency warning ASoC: stm32: spdifrx: change trace level on iec control ...
2019-05-08ALSA: line6: toneport: Fix broken usage of timer for delayed executionTakashi Iwai1-7/+9
The line6 toneport driver has code for some delayed initialization, and this hits the kernel Oops because mutex and other sleepable functions are used in the timer callback. Fix the abuse by a delayed work instead so that everything works gracefully. Reported-by: syzbot+a07d0142e74fdd595cfb@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-05-07Merge tag 'leds-for-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-ledsLinus Torvalds1-4/+4
Pull LED updates from Jacek Anaszewski: "LED core fixes and improvements: - avoid races with workqueue - Kconfig: pedantic cleanup - small fixes for Flash class description leds-lt3593: - remove unneeded assignment in lt3593_led_probe - drop pdata handling code leds-blinkm: - clean up double assignment to data->i2c_addr leds-pca955x, leds-pca963x: - revert ACPI support, as it turned out that there is no evidence of officially registered ACPI IDs for these devices. - make use of device property API leds-as3645a: - switch to fwnode property API LED related addition to ACPI documentation: - document how to refer to LEDs from remote nodes LED related fix to ALSA line6/toneport driver: - avoid polluting led_* namespace And lm3532 driver relocation from MFD to LED subsystem, accompanied by various improvements and optimizations; it entails also a change in omap4-droid4-xt894.dts: - leds: lm3532: Introduce the lm3532 LED driver - mfd: ti-lmu: Remove LM3532 backlight driver references - ARM: dts: omap4-droid4: Update backlight dt properties - dt: lm3532: Add lm3532 dt doc and update ti_lmu doc" * tag 'leds-for-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: avoid races with workqueue ALSA: line6: Avoid polluting led_* namespace leds: lm3532: Introduce the lm3532 LED driver mfd: ti-lmu: Remove LM3532 backlight driver references ARM: dts: omap4-droid4: Update backlight dt properties dt: lm3532: Add lm3532 dt doc and update ti_lmu doc leds: Small fixes for Flash class description leds: blinkm: clean up double assignment to data->i2c_addr leds: pca963x: Make use of device property API leds: pca955x: Make use of device property API leds: lt3593: Remove unneeded assignment in lt3593_led_probe leds: lt3593: drop pdata handling code leds: pca955x: Revert "Add ACPI support" leds: pca963x: Revert "Add ACPI support" drivers: leds: Kconfig: pedantic cleanups ACPI: Document how to refer to LEDs from remote nodes leds: as3645a: Switch to fwnode property API
2019-04-28ALSA: line6: use dynamic buffersGreg Kroah-Hartman3-40/+65
The line6 driver uses a lot of USB buffers off of the stack, which is not allowed on many systems, causing the driver to crash on some of them. Fix this up by dynamically allocating the buffers with kmalloc() which allows for proper DMA-able memory. Reported-by: Christo Gouws <gouws.christo@gmail.com> Reported-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Christo Gouws <gouws.christo@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-04-18ALSA: line6: Avoid polluting led_* namespaceJacek Anaszewski1-4/+4
led_colors clashes with the array of the same name being added to the LED class. Do the following amendments to fix this issue and the other prospective one. led_colors -> toneport_led_colors led_init_vals -> toneport_led_init_vals Fixes: f44edd7b2bbed ("ALSA: line6/toneport: Implement LED controls via LED class") Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Takashi Iwai <tiwai@suse.de>
2019-01-18Merge branch 'topic/pcm-device-suspend' into for-nextTakashi Iwai1-3/+1
Pull the PCM suspend improvement / cleanup. This moves the most of snd_pcm_suspend*() calls into PCM's own device PM ops. There should be no change from the functionality POV. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-15ALSA: usb: Remove superfluous snd_pcm_suspend*() callsTakashi Iwai1-3/+1
The call of snd_pcm_suspend_all() & co became superfluous since we call it in the PCM PM ops. Let's remove them. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-07ALSA: line6: fix check on snd_card_registerAditya Pakki1-1/+2
The fix checks if snd_card_register() fails, and if so logs the error via dev_err() consistent with other patches. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-18ALSA: line6: stop using get_seconds()Arnd Bergmann1-2/+3
The get_seconds() function is deprecated because it truncates the timestamp to 32 bits, so all users should change to ktime_get_seconds() or ktime_get_real_seconds(). The firmware interface for passing the timestamp is also limited to 32 bits, so this patch only has the cosmetic effect of avoiding the old interface. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook2-4/+4
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook1-2/+4
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-04-12ALSA: line6: Use correct endpoint type for midi outputFabián Inostroza1-1/+1
Sending MIDI messages to a PODxt through the USB connection shows "usb_submit_urb failed" in dmesg and the message is not received by the POD. The error is caused because in the funcion send_midi_async() in midi.c there is a call to usb_sndbulkpipe() for endpoint 3 OUT, but the PODxt USB descriptor shows that this endpoint it's an interrupt endpoint. Patch tested with PODxt only. [ The bug has been present from the very beginning in the staging driver time, but Fixes below points to the commit moving to sound/ directory so that the fix can be cleanly applied -- tiwai ] Fixes: 61864d844c29 ("ALSA: move line6 usb driver into sound/usb") Signed-off-by: Fabián Inostroza <fabianinostroza@udec.cl> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-11-21treewide: Remove TIMER_FUNC_TYPE and TIMER_DATA_TYPE castsKees Cook1-1/+1
With all callbacks converted, and the timer callback prototype switched over, the TIMER_FUNC_TYPE cast is no longer needed, so remove it. Conversion was done with the following scripts: perl -pi -e 's|\(TIMER_FUNC_TYPE\)||g' \ $(git grep TIMER_FUNC_TYPE | cut -d: -f1 | sort -u) perl -pi -e 's|\(TIMER_DATA_TYPE\)||g' \ $(git grep TIMER_DATA_TYPE | cut -d: -f1 | sort -u) The now unused macros are also dropped from include/linux/timer.h. Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-13Merge tag 'asoc-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linusTakashi Iwai1-0/+1
ASoC: Updates for v4.15 The biggest thing this release has been the conversion of the AC98 bus to the driver model, that's been a long time coming so thanks to Robert Jarzmik for his dedication there. Due to there being some AC97 MFD there's a few fairly large changes in input and the MFD layer, mainly to the wm97xx driver. There's also some drivers/drm changes to support the new AMD Stoney platform, these are shared with the DRM subsystem and should be being merged via both. Within the subsystem the overwhelming bulk of the changes is in the Intel drivers which continue to need lots of cleanups and fixes, this release they've also gained support for their open source firmware. There's also some large changs in the core as Morimoto-san continues to mirror operations into the component level in preparation for conversion of drivers to that. - The AC97 bus has finally caught up with the driver model thanks to some dedicated and persistent work from Robert Jarzmik. - Continued work from Morimoto-san on moving us towards being able to use components for everything. - Lots of cleanups for the Intel platform code, including support for their open source audio firmware. - Support for scaling MCLK with sample rate in simple-card. - Support for AMD Stoney platform.
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.