aboutsummaryrefslogtreecommitdiffstats
path: root/sound/usb/mixer.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-08-09ALSA: usb-audio: Mark expected switch fall-throughGustavo A. R. Silva1-0/+2
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1357413 ("Missing break in switch") Addresses-Coverity-ID: 114917 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-16ALSA: usb-audio: Tidy up logic for Processing Unit min/max valuesJorge Sanjuan1-17/+41
This patch refactors the processing units min/max calculation logic for the mixer controls and fixes an issue where the Mode Select checking of the Up/Down mixers doesn't differentiate between the UAC1 and UAC2 Control Selector (0x02) and the UAC3 one which is different (0x01). Signed-off-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-16ALSA: usb-audio: Unify virtual type units type to UAC3 valuesJorge Sanjuan1-13/+23
The Audio Control interface descriptor subtypes do not match across all the UAC versions. That makes reusability of the "virtual type" (Mixer, Processors, Selectors, etc) terminals difficult. It also makes the mixer get the default names for the virtual terminals wrong due to the overlap. This patch proposes an unified approach by always using the most comprehensive spec version to define them all (in this case UAC3). Signed-off-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-16ALSA: usb-audio: Add support for Processing Units in UAC3Jorge Sanjuan1-2/+49
This patch adds support for the Processig Units defined in the UAC3 spec. The main difference with the previous specs is the lack of on/off switches in the controls for these units and the addiction of the new Multi Function Processing Unit. The current version of the UAC3 spec doesn't define any useful controls for the new Multi Function Processing Unit so no control will get created once this unit is parsed. Signed-off-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-16ALSA: usb-audio: Processing Unit controls parsing in UAC2Jorge Sanjuan1-2/+15
Current support for UAC2 Processing Units does the parsing as one control per bit in the bitmap. However, the UAC2 spec defines the controls as bit pairs where b01 means read-only and b11 means read/write control. This patch fixes that and uses the helper functions for checking controls readability/writability when the control is defined as bit pairs (UAC2 and UAC3). Signed-off-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-16ALSA: usb-audio: Add support for Selector Units in UAC3Jorge Sanjuan1-10/+44
This patch add support for Selector Units and Clock Selector Units defined in the new UAC3 spec. Selector Units play a really important role in the new UAC3 spec as Processing Units do not define an on/off switch control anymore. This forces topology designers to add bypass paths in the topology to enable/dissable the Processing Units. Signed-off-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-15Merge tag 'sound-fix-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds1-13/+32
Pull sound fixes from Takashi Iwai: "Here is a collection of small fixes on top of the previous update. All small and obvious fixes. Mostly for usual suspects, USB-audio and HD-audio, but a few trivial error handling fixes for misc drivers as well" * tag 'sound-fix-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: Always create the interrupt pipe for the mixer ALSA: usb-audio: Add insertion control for UAC3 BADD ALSA: usb-audio: Change in connectors control creation interface ALSA: usb-audio: Add bi-directional terminal types ALSA: lx6464es: add error handling for pci_ioremap_bar ALSA: sonicvibes: add error handling for snd_ctl_add ALSA: usb-audio: Remove explicitly listed Mytek devices ALSA: usb-audio: Generic DSD detection for XMOS-based implementations ALSA: usb-audio: Add native DSD support for Mytek DACs ALSA: hda/realtek - Add shutup hint ALSA: usb-audio: Disable the quirk for Nura headset ALSA: hda: add dock and led support for HP ProBook 640 G4 ALSA: hda: add dock and led support for HP EliteBook 830 G5 ALSA: emu10k1: add error handling for snd_ctl_add ALSA: fm801: add error handling for snd_ctl_add
2018-06-14ALSA: usb-audio: Always create the interrupt pipe for the mixerJorge Sanjuan1-3/+5
An UAC3 BADD device may also include an interrupt status pipe to report changes on the HEADSET ADAPTER terminals. The creation of the status pipe is dependent on the device reporting that it has it. Signed-off-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-14ALSA: usb-audio: Add insertion control for UAC3 BADDJorge Sanjuan1-0/+17
The HEADSET ADAPTER profile for BADD devices is meant to support Insertion Control for the Input and Output Terminals of the headset. This patch defines the BADD inferred input and output terminals and builds the connector controls. Signed-off-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-14ALSA: usb-audio: Change in connectors control creation interfaceJorge Sanjuan1-10/+10
Change build_connector_control() and get_connector_control_name() so they take `struct usb_mixer_interface` as input argument instead of `struct mixer_build`. This is preliminary work to add support for connectors control for UAC3 BADD devices. No functional change. Signed-off-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook1-1/+1
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-28ALSA: usb-audio: Follow standard coding styleTakashi Iwai1-8/+17
Avoid if ((err = ...) style and expand to multiple lines instead. No change in the end result, but just the beautification. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-15ALSA: usb-audio: UAC3: Parse Input Terminal number of channels.Jorge Sanjuan1-2/+6
Obtain the number of channels for the Input Terminal from the Logical Cluster Descriptor. This achieves a useful minimal parsing of this unit so it can be used in other units in the topology. Signed-off-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk> Reviewed-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Tested-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-15ALSA: usb-audio: UAC3 Add support for connector insertion.Jorge Sanjuan1-14/+94
This adds support for the UAC3 insertion controls. The status is reported as a boolean value in the same way it used to do for UAC2. Hence, the presence of any connector in the response will make the control saying the jack is connected. The UAC2 support for this control has been moved to a dedicated control for connectors as both UAC2 and UAC3 follow a specific Control Request Parameter Block for this control. This parameter block for UAC3 could not be read in the same simplistic manner as in UAC2. This implementation is not requesting additional information from the HIGH CAPABILITY Connectors descriptor. Tested with an UAC3 device with UAC2 as legacy configuration. The connector status can be read with `amixer` and the interrupt is also caught with `alsactl monitor`. Signed-off-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk> Reviewed-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Tested-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-15ALSA: usb-audio: UAC3. Add support for mixer unit.Jorge Sanjuan1-7/+81
This adds support for the MIXER UNIT in UAC3. All the information is obtained from the (HIGH CAPABILITY) Cluster's header. We don't read the rest of the logical cluster to obtain the channel config as that wont make any difference in the current mixer behaviour. The name of the mixer unit is not yet requested as there is not support for the UAC3 Class Specific String requests. Tested in an UAC3 device working as a HEADSET with a basic mixer unit (same as the one in the BADD spec) with no controls. Signed-off-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk> Reviewed-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Tested-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-15Merge branch 'for-linus' into for-nextTakashi Iwai1-0/+8
Back-merge of UAC3 fixes for applying further enhancements. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-13ALSA: usb: mixer: volume quirk for CM102-A+/102S+Federico Cuello1-0/+8
Currently it's not possible to set volume lower than 26% (it just mutes). Also fixes this warning: Warning! Unlikely big volume range (=9472), cval->res is probably wrong. [13] FU [PCM Playback Volume] ch = 2, val = -9473/-1/1 , and volume works fine for full range. Signed-off-by: Federico Cuello <fedux@fedux.com.ar> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-13ALSA: usb: add UAC3 BADD profiles supportRuslan Bilovol1-31/+296
Recently released USB Audio Class 3.0 specification contains BADD (Basic Audio Device Definition) document which describes pre-defined UAC3 configurations. BADD support is mandatory for UAC3 devices, it should be implemented as a separate USB device configuration. As per BADD document, class-specific descriptors shall not be included in the Device’s Configuration descriptor ("inferred"), but host can guess them from BADD profile number, number of endpoints and their max packed sizes. This patch adds support of all BADD profiles from the spec Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Tested-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-04ALSA: usb: mixer: make string parsing independent of mixer_build stateRuslan Bilovol1-14/+16
Functions like snd_usb_copy_string_desc() or get_term_name() don't actually need mixer_build state but can use snd_usb_audio structure instead to get usb device. This patch has no functional change but prepares to future UAC3 BADD profiles support which don't have class-specific descriptors so won't have mixer_build state. Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-03ALSA: usb-audio: Clean up mixer element list traverseTakashi Iwai1-11/+9
Introduce a new macro for iterating over mixer element list for avoiding the open codes in many places. Also the open-coded container_of() and the forced cast to struct usb_mixer_elem_info are replaced with another simple macro, too. No functional changes but just readability improvement. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-02ALSA: usb-audio: Add "Keep Interface" controlTakashi Iwai1-0/+45
This patch adds "Keep Interface" control for each USB-audio device. The control element is with SND_CTL_IFACE_CARD, so that it won't appear on any sane mixer applications. For a device that is confirmed to work well with "keep-interface" mode, user can flip the control via amixer, e.g. % amixer -c1 cset iface=CARD,name='Keep Interface' on and save/restore the state via alsactl. The reason to provide this via control API is that the behavior must be pretty depending on the device (and the firmware in it), so it's not ideal to apply via module option. For a device that certainly works, we may set it statically via a quirk table entry. But a device like Dell WD15 dock behaves so differently depending on the firmware, and we can't set it statically. So leave this as a dynamic switch each user can adjust freely. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-02ALSA: usb-audio: Initialize Dell Dock playback volumesTakashi Iwai1-0/+2
In the early commit adcdd0d5a1cb ("ALSA: usb-audio: Skip volume controls triggers hangup on Dell USB Dock"), we add the mixer quirks for Dell dock to skip two mixer FU's for playback. This supposed that the device has always the proper initial volume, but it doesn't seem always correct. This patch adds the explicit initialization of the volumes to the fixed 0dB at the device probe time. Also, such a fixup is needed after the resume, so a new function is hooked to the resume callback as well. Bugzilla: http://bugzilla.suse.com/show_bug.cgi?id=1089467 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-04-24ALSA: usb-audio: Fix missing endian conversionTakashi Iwai1-2/+2
The UAC2 jack detection support introduced the bmControls checks in a couple of places, but they forgot the endian conversion; the bmControls of UAC2 terminal descriptor is __le16, not a byte like in UAC1. Fixes: 5a222e849452 ("ALSA: usb-audio: UAC2 jack detection") Tested-by: Andrew Chant <achant@google.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-04-23ALSA: usb-audio: Fix forgotten conversion of control query functionsTakashi Iwai1-1/+2
The recent code refactoring made the argument for some helper functions to be the explicit UAC_CS_* and UAC2_CS_* value instead of 0-based offset. However, there was one place left forgotten, and it caused a regression on some devices appearing as the inconsistent mixer setup. This patch corrects the forgotten conversion. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199449 Fixes: 21e9b3e931f7 ("ALSA: usb-audio: fix uac control query argument") Tested-by: Nazar Mokrynskyi <nazar@mokrynskyi.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-27ALSA: usb-audio: fix memory leak on cvalColin Ian King1-1/+3
With the current exit return path of the ctl_info allocation failure cval is not being freed resulting in a memory leak. Fix this by kfree'ing it on the return. Detected by CoverityScan, CID#1466878 ("Resource Leak") Fixes: 21e9b3e931f7 ("ALSA: usb-audio: fix uac control query argument") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-24ALSA: usb-audio: update clock valid controlAndrew Chant1-14/+19
Make the "clock valid" control a global control instead of a mixer so that it doesn't appear in mixer applications. Additionally, remove the check for writeability prohibited by spec, and Use common code to read the control value. Tested with a UAC2 Audio device that presents a clock validity control. The control still shows up in /proc usbmixer but not in alsamixer. Signed-off-by: Andrew Chant <achant@google.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-24ALSA: usb-audio: UAC2 jack detectionAndrew Chant1-1/+97
This implements UAC2 jack detection support, presenting jack status as a boolean read-only mono mixer. The presence of any channel in the UAC2_TE_CONNECTOR control for a terminal will result in the mixer saying the jack is connected. Mixer naming follows the convention in sound/core/ctljack.c, terminating the mixer with " Jack". For additional clues as to which jack is being presented, the name is prefixed with " - Input Jack" or " - Output Jack" depending on if it's an input or output terminal. This is required because terminal names are ambiguous between inputs and outputs and often duplicated - Bidirectional terminal types (0x400 -> 0x4FF) "... may be used separately for input only or output only. These types require two Terminal descriptors. Both have the same type." (quote from "USB Device Class Definition for Terminal Types") Since bidirectional terminal types are common for headphone adapters, this distinguishes between two otherwise identically-named jack controls. Tested with a UAC2 audio device with connector control capability. Signed-off-by: Andrew Chant <achant@google.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-23ALSA: usb-audio: fix uac control query argumentAndrew Chant1-26/+43
This patch fixes code readability and should have no functional change. Correct uac control query functions to account for the 1-based indexing of USB Audio Class control identifiers. The function parameter, u8 control, should be the constant defined in audio-v2.h to identify the control to be checked for readability or writeability. This patch fixes all callers that had adjusted, and makes explicit the mapping between audio_feature_info[] array index and the associated control identifier. Signed-off-by: Andrew Chant <achant@google.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-21ALSA: usb: initial USB Audio Device Class 3.0 supportRuslan Bilovol1-109/+228
Recently released USB Audio Class 3.0 specification introduces many significant changes comparing to previous versions, like - new Power Domains, support for LPM/L1 - new Cluster descriptor - changed layout of all class-specific descriptors - new High Capability descriptors - New class-specific String descriptors - new and removed units - additional sources for interrupts - removed Type II Audio Data Formats - ... and many other things (check spec) It also provides backward compatibility through multiple configurations, as well as requires mandatory support for BADD (Basic Audio Device Definition) on each ADC3.0 compliant device This patch adds initial support of UAC3 specification that is enough for Generic I/O Profile (BAOF, BAIF) device support from BADD document. Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-02-12ALSA: usb-audio: Fix UAC2 get_ctl request with a RANGE attributeKirill Marinushkin1-7/+11
The layout of the UAC2 Control request and response varies depending on the request type. With the current implementation, only the Layout 2 Parameter Block (with the 2-byte sized RANGE attribute) is handled properly. For the Control requests with the 1-byte sized RANGE attribute (Bass Control, Mid Control, Tremble Control), the response is parsed incorrectly. This commit: * fixes the wLength field value in the request * fixes parsing the range values from the response Fixes: 23caaf19b11e ("ALSA: usb-mixer: Add support for Audio Class v2.0") Signed-off-by: Kirill Marinushkin <k.marinushkin@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-12-19ALSA: usb-audio: Proper fallback at get_term_name()Takashi Iwai1-2/+6
get_term_name() calls snd_usb_copy_string_desc() for retrieving the name when a specific ID (name field) is given. When this returns an error (zero), however, it simply returns as is. This will end up in a fixed name string in the caller side, which often is meaningless. For giving a bit more useful name string depending on the terminal type, change the get_term_name() function to go through the fallback mode. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-12-19Merge branch 'for-linus' into for-nextTakashi Iwai1-8/+18
Back-merge of 4.15-rc development branch for further development of USB-audio stuff. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-12-19ALSA: usb-audio: Fix the missing ctl name suffix at parsing SUTakashi Iwai1-11/+16
The commit 89b89d121ffc ("ALSA: usb-audio: Add check return value for usb_string()") added the check of the return value from snd_usb_copy_string_desc(), which is correct per se, but it introduced a regression. In the original code, either the "Clock Source", "Playback Source" or "Capture Source" suffix is added after the terminal string, while the commit changed it to add the suffix only when get_term_name() is failing. It ended up with an incorrect ctl name like "PCM" instead of "PCM Capture Source". Also, even the original code has a similar bug: when the ctl name is generated from snd_usb_copy_string_desc() for the given iSelector, it also doesn't put the suffix. This patch addresses these issues: the suffix is added always when no static mapping is found. Also the patch tries to put more comments and cleans up the if/else block for better readability in order to avoid the same pitfall again. Fixes: 89b89d121ffc ("ALSA: usb-audio: Add check return value for usb_string()") Reported-and-tested-by: Mauro Santos <registo.mailling@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-12-04ALSA: usb-audio: Add check return value for usb_string()Jaejoong Kim1-4/+5
snd_usb_copy_string_desc() returns zero if usb_string() fails. In case of failure, we need to check the snd_usb_copy_string_desc()'s return value and add an exception case Signed-off-by: Jaejoong Kim <climbbb.kim@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-12-04ALSA: usb-audio: Fix out-of-bound errorJaejoong Kim1-0/+4
The snd_usb_copy_string_desc() retrieves the usb string corresponding to the index number through the usb_string(). The problem is that the usb_string() returns the length of the string (>= 0) when successful, but it can also return a negative value about the error case or status of usb_control_msg(). If iClockSource is '0' as shown below, usb_string() will returns -EINVAL. This will result in '0' being inserted into buf[-22], and the following KASAN out-of-bound error message will be output. AudioControl Interface Descriptor: bLength 8 bDescriptorType 36 bDescriptorSubtype 10 (CLOCK_SOURCE) bClockID 1 bmAttributes 0x07 Internal programmable Clock (synced to SOF) bmControls 0x07 Clock Frequency Control (read/write) Clock Validity Control (read-only) bAssocTerminal 0 iClockSource 0 To fix it, check usb_string()'return value and bail out. ================================================================== BUG: KASAN: stack-out-of-bounds in parse_audio_unit+0x1327/0x1960 [snd_usb_audio] Write of size 1 at addr ffff88007e66735a by task systemd-udevd/18376 CPU: 0 PID: 18376 Comm: systemd-udevd Not tainted 4.13.0+ #3 Hardware name: LG Electronics 15N540-RFLGL/White Tip Mountain, BIOS 15N5 Call Trace: dump_stack+0x63/0x8d print_address_description+0x70/0x290 ? parse_audio_unit+0x1327/0x1960 [snd_usb_audio] kasan_report+0x265/0x350 __asan_store1+0x4a/0x50 parse_audio_unit+0x1327/0x1960 [snd_usb_audio] ? save_stack+0xb5/0xd0 ? save_stack_trace+0x1b/0x20 ? save_stack+0x46/0xd0 ? kasan_kmalloc+0xad/0xe0 ? kmem_cache_alloc_trace+0xff/0x230 ? snd_usb_create_mixer+0xb0/0x4b0 [snd_usb_audio] ? usb_audio_probe+0x4de/0xf40 [snd_usb_audio] ? usb_probe_interface+0x1f5/0x440 ? driver_probe_device+0x3ed/0x660 ? build_feature_ctl+0xb10/0xb10 [snd_usb_audio] ? save_stack_trace+0x1b/0x20 ? init_object+0x69/0xa0 ? snd_usb_find_csint_desc+0xa8/0xf0 [snd_usb_audio] snd_usb_mixer_controls+0x1dc/0x370 [snd_usb_audio] ? build_audio_procunit+0x890/0x890 [snd_usb_audio] ? snd_usb_create_mixer+0xb0/0x4b0 [snd_usb_audio] ? kmem_cache_alloc_trace+0xff/0x230 ? usb_ifnum_to_if+0xbd/0xf0 snd_usb_create_mixer+0x25b/0x4b0 [snd_usb_audio] ? snd_usb_create_stream+0x255/0x2c0 [snd_usb_audio] usb_audio_probe+0x4de/0xf40 [snd_usb_audio] ? snd_usb_autosuspend.part.7+0x30/0x30 [snd_usb_audio] ? __pm_runtime_idle+0x90/0x90 ? kernfs_activate+0xa6/0xc0 ? usb_match_one_id_intf+0xdc/0x130 ? __pm_runtime_set_status+0x2d4/0x450 usb_probe_interface+0x1f5/0x440 Cc: <stable@vger.kernel.org> Signed-off-by: Jaejoong Kim <climbbb.kim@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-11-28Revert "ALSA: usb-audio: Fix potential zero-division at parsing FU"Takashi Iwai1-2/+2
The commit 8428a8ebde2d ("ALSA: usb-audio: Fix potential zero-division at parsing FU") is utterly bogus and breaks the case with csize=1 instead of fixing anything. Just take it back again. Reported-by: Jörg Otte <jrg.otte@gmail.com> Fixes: 8428a8ebde2d ("ALSA: usb-audio: Fix potential zero-division at parsing FU" Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-21ALSA: usb-audio: Fix potential zero-division at parsing FUTakashi Iwai1-2/+2
parse_audio_feature_unit() contains a code dividing potentially with zero when a malformed FU descriptor is passed. Although there is already a sanity check, it checks only the value zero, hence it can still lead to a zero-division when a value 1 is passed there. Fix it by correcting the sanity check (and the error message thereof). Fixes: 23caaf19b11e ("ALSA: usb-mixer: Add support for Audio Class v2.0") Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-11-21ALSA: usb-audio: Fix potential out-of-bound access at parsing SUTakashi Iwai1-1/+2
The usb-audio driver may trigger an out-of-bound access at parsing a malformed selector unit, as it checks the header length only after evaluating bNrInPins field, which can be already above the given length. Fix it by adding the length check beforehand. Fixes: 99fc86450c43 ("ALSA: usb-mixer: parse descriptors with structs") Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-11-21ALSA: usb-audio: Add sanity checks to FE parserTakashi Iwai1-0/+12
When the usb-audio descriptor contains the malformed feature unit description with a too short length, the driver may access out-of-bounds. Add a sanity check of the header size at the beginning of parse_audio_feature_unit(). Fixes: 23caaf19b11e ("ALSA: usb-mixer: Add support for Audio Class v2.0") Reported-by: Andrey Konovalov <andreyknvl@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-11-17ALSA: usb-audio: uac1: Invalidate ctl on interruptJulian Scheel1-1/+6
When an interrupt occurs, the value of at least one of the belonging controls should have changed. To make sure they get re-read from device on the next read, invalidate the cache. This was correctly implemented for uac2 already, but missing for uac1. Signed-off-by: Julian Scheel <julian@jusst.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-10ALSA: usb-audio: Kill stray URB at exitingTakashi Iwai1-2/+10
USB-audio driver may leave a stray URB for the mixer interrupt when it exits by some error during probe. This leads to a use-after-free error as spotted by syzkaller like: ================================================================== BUG: KASAN: use-after-free in snd_usb_mixer_interrupt+0x604/0x6f0 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:16 dump_stack+0x292/0x395 lib/dump_stack.c:52 print_address_description+0x78/0x280 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 kasan_report+0x23d/0x350 mm/kasan/report.c:409 __asan_report_load8_noabort+0x19/0x20 mm/kasan/report.c:430 snd_usb_mixer_interrupt+0x604/0x6f0 sound/usb/mixer.c:2490 __usb_hcd_giveback_urb+0x2e0/0x650 drivers/usb/core/hcd.c:1779 .... Allocated by task 1484: save_stack_trace+0x1b/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551 kmem_cache_alloc_trace+0x11e/0x2d0 mm/slub.c:2772 kmalloc ./include/linux/slab.h:493 kzalloc ./include/linux/slab.h:666 snd_usb_create_mixer+0x145/0x1010 sound/usb/mixer.c:2540 create_standard_mixer_quirk+0x58/0x80 sound/usb/quirks.c:516 snd_usb_create_quirk+0x92/0x100 sound/usb/quirks.c:560 create_composite_quirk+0x1c4/0x3e0 sound/usb/quirks.c:59 snd_usb_create_quirk+0x92/0x100 sound/usb/quirks.c:560 usb_audio_probe+0x1040/0x2c10 sound/usb/card.c:618 .... Freed by task 1484: save_stack_trace+0x1b/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 kasan_slab_free+0x72/0xc0 mm/kasan/kasan.c:524 slab_free_hook mm/slub.c:1390 slab_free_freelist_hook mm/slub.c:1412 slab_free mm/slub.c:2988 kfree+0xf6/0x2f0 mm/slub.c:3919 snd_usb_mixer_free+0x11a/0x160 sound/usb/mixer.c:2244 snd_usb_mixer_dev_free+0x36/0x50 sound/usb/mixer.c:2250 __snd_device_free+0x1ff/0x380 sound/core/device.c:91 snd_device_free_all+0x8f/0xe0 sound/core/device.c:244 snd_card_do_free sound/core/init.c:461 release_card_device+0x47/0x170 sound/core/init.c:181 device_release+0x13f/0x210 drivers/base/core.c:814 .... Actually such a URB is killed properly at disconnection when the device gets probed successfully, and what we need is to apply it for the error-path, too. In this patch, we apply snd_usb_mixer_disconnect() at releasing. Also introduce a new flag, disconnected, to struct usb_mixer_interface for not performing the disconnection procedure twice. Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-22Merge branch 'for-linus' into for-nextTakashi Iwai1-0/+2
Conflicts: sound/core/control.c
2017-08-18ALSA: usb-audio: don't retry snd_usb_ctl_msg after timeoutStephen Barber1-7/+13
A few calls to snd_usb_ctl_msg wrap the function in a retry loop. In the worst case, the timeout for snd_usb_ctl_msg is 5 seconds, which when retried 10 times (for example, if a device is removed) could cause a probe to hang for ~50 seconds. Example stack trace from 3.14 which triggered a hung task timeout: Call Trace: [<ffffffffa2c1f720>] ? inet6_set_link_af.part.35+0x12/0x12 [<ffffffffa2c20309>] schedule+0x6e/0x70 [<ffffffffa2c1f81c>] schedule_timeout+0xfc/0x13c [<ffffffffa2667bbc>] ? rcu_read_unlock_sched_notrace+0x17/0x17 [<ffffffffa2c20d68>] __wait_for_common+0x153/0x190 [<ffffffffa2c20d68>] ? __wait_for_common+0x153/0x190 [<ffffffffa26890e5>] ? wake_up_state+0x12/0x12 [<ffffffffa2c20e0e>] wait_for_completion_timeout+0x1d/0x1f [<ffffffffa2a07c70>] usb_start_wait_urb+0x93/0xf1 [<ffffffffa2a07daf>] usb_control_msg+0xe1/0x11d [<ffffffffc02cd254>] snd_usb_ctl_msg+0x9c/0xf1 [snd_usb_audio] [<ffffffffc02ce191>] snd_usb_mixer_set_ctl_value+0x124/0xab1 [snd_usb_audio] [<ffffffffc02ce230>] snd_usb_mixer_set_ctl_value+0x1c3/0xab1 [snd_usb_audio] [<ffffffffc02ce58e>] snd_usb_mixer_set_ctl_value+0x521/0xab1 [snd_usb_audio] [<ffffffffc02cee88>] snd_usb_mixer_add_control+0x36a/0x1264 [snd_usb_audio] [<ffffffffc02cf323>] snd_usb_mixer_add_control+0x805/0x1264 [snd_usb_audio] [<ffffffffa2a06e11>] ? usb_free_urb+0x1a/0x1c [<ffffffffc02cfcf7>] snd_usb_mixer_add_control+0x11d9/0x1264 [snd_usb_audio] [<ffffffffc02d000f>] snd_usb_create_mixer+0xbc/0x286 [snd_usb_audio] [<ffffffffc02cac18>] 0xffffffffc02cac17 [<ffffffffa2a0aaf1>] usb_probe_interface+0x17c/0x21c [<ffffffffa29a65bc>] driver_probe_device+0xae/0x1fa [<ffffffffa29a6767>] __device_attach_driver+0x5f/0x66 [<ffffffffa29a6708>] ? driver_probe_device+0x1fa/0x1fa [<ffffffffa29a4a60>] bus_for_each_drv+0x87/0xaa [<ffffffffa29a688a>] __device_attach+0x9d/0x101 [<ffffffffa29a6913>] device_initial_probe+0x13/0x15 [<ffffffffa29a5ae6>] bus_probe_device+0x33/0x96 [<ffffffffa29a3d19>] device_add+0x328/0x547 [<ffffffffa2a09355>] usb_set_configuration+0x624/0x674 [<ffffffffa2a11949>] generic_probe+0x45/0x77 [<ffffffffa2a0a962>] usb_probe_device+0x2d/0x40 [<ffffffffa29a65bc>] driver_probe_device+0xae/0x1fa [<ffffffffa29a6767>] __device_attach_driver+0x5f/0x66 [<ffffffffa29a6708>] ? driver_probe_device+0x1fa/0x1fa [<ffffffffa29a4a60>] bus_for_each_drv+0x87/0xaa [<ffffffffa29a688a>] __device_attach+0x9d/0x101 [<ffffffffa29a6913>] device_initial_probe+0x13/0x15 [<ffffffffa29a5ae6>] bus_probe_device+0x33/0x96 [<ffffffffa29a3d19>] device_add+0x328/0x547 [<ffffffffa29030bc>] ? add_device_randomness+0x111/0x130 [<ffffffffa2a00967>] usb_new_device+0x2a2/0x3c0 [<ffffffffa2a02ddc>] hub_thread+0xa3d/0xeed [<ffffffffa2c2010d>] ? __schedule+0x41e/0x5ac [<ffffffffa26957ce>] ? finish_wait+0x62/0x62 [<ffffffffa2a0239f>] ? usb_reset_device+0x16a/0x16a [<ffffffffa267b255>] kthread+0x108/0x110 [<ffffffffa267b14d>] ? __kthread_parkme+0x67/0x67 [<ffffffffa2c23b2c>] ret_from_fork+0x7c/0xb0 [<ffffffffa267b14d>] ? __kthread_parkme+0x67/0x67 Signed-off-by: Stephen Barber <smbarber@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-17ALSA: usb-audio: Add mute TLV for playback volumes on C-Media devicesTakashi Iwai1-0/+2
C-Media devices (at least some models) mute the playback stream when volumes are set to the minimum value. But this isn't informed via TLV and the user-space, typically PulseAudio, gets confused as if it's still played in a low volume. This patch adds the new flag, min_mute, to struct usb_mixer_elem_info for indicating that the mixer element is with the minimum-mute volume. This flag is set for known C-Media devices in snd_usb_mixer_fu_apply_quirk() in turn. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196669 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-12ALSA: usb-audio: constify snd_kcontrol_new structuresBhumika Goyal1-3/+3
Declare snd_kcontrol_new strcutures as const as they are only passed as an argument to the function snd_ctl_new1. This argument is of type const, so snd_kcontrol_new structures having this property can be made const too. Done using Coccinelle: @r disable optional_qualifier@ identifier x; position p; @@ static struct snd_kcontrol_new x@p={...}; @ok@ identifier r.x; position p; @@ snd_ctl_new1(&x@p,...) @bad@ position p != {r.p,ok.p}; identifier r.x; @@ x@p @depends on !bad disable optional_qualifier@ identifier r.x; @@ +const struct snd_kcontrol_new x; Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-12-09ALSA: usb-audio: Add QuickCam Communicate Deluxe/S7500 to volume_control_quirksCon Kolivas1-1/+2
The Logitech QuickCam Communicate Deluxe/S7500 microphone fails with the following warning. [ 6.778995] usb 2-1.2.2.2: Warning! Unlikely big volume range (=3072), cval->res is probably wrong. [ 6.778996] usb 2-1.2.2.2: [5] FU [Mic Capture Volume] ch = 1, val = 4608/7680/1 Adding it to the list of devices in volume_control_quirks makes it work properly, fixing related typo. Signed-off-by: Con Kolivas <kernel@kolivas.org> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-04-09ALSA: usb-audio: allow clock source validity interruptsDaniel Mack1-1/+8
miniDSP USBStreamer UAC2 devices send clock validity changes with the control field set to zero. The current interrupt handler ignores all packets if the control field does not match the mixer element's, but it really should only do that in case that field is needed to distinguish multiple elements with the same ID. This patch implements a logic that lets notifications packets pass if the element ID is unique for a given device. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-04-09ALSA: usb-audio: add UAC2 clock sources as mixer controlsDaniel Mack1-1/+68
UAC2 specifies clock sources that optionally have validity controls. This patch exposes them as mixer controls, so they can be read (and at least in theory even be written) by userspace applications in order to make clock selection policy decisions. This implementation does nothing if the device is not UAC2 compliant, or if the clock source does not define said validity control bits. Tested with a miniDSP USBStreamer (0x2752/0x0016). Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-14ALSA: usb-audio: Add a more accurate volume quirk for AudioQuest DragonFlyAnssi Hannula1-0/+2
AudioQuest DragonFly DAC reports a volume control range of 0..50 (0x0000..0x0032) which in USB Audio means a range of 0 .. 0.2dB, which is obviously incorrect and would cause software using the dB information in e.g. volume sliders to have a massive volume difference in 100..102% range. Commit 2d1cb7f658fb ("ALSA: usb-audio: add dB range mapping for some devices") added a dB range mapping for it with range 0..50 dB. However, the actual volume mapping seems to be neither linear volume nor linear dB scale, but instead quite close to the cubic mapping e.g. alsamixer uses, with a range of approx. -53...0 dB. Replace the previous quirk with a custom dB mapping based on some basic output measurements, using a 10-item range TLV (which will still fit in alsa-lib MAX_TLV_RANGE_SIZE). Tested on AudioQuest DragonFly HW v1.2. The quirk is only applied if the range is 0..50, so if this gets fixed/changed in later HW revisions it will no longer be applied. v2: incorporated Takashi Iwai's suggestion for the quirk application method Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-08-28ALSA: usb-audio: correct the value cache check.Yao-Wen Mao1-1/+1
The check of cval->cached should be zero-based (including master channel). Signed-off-by: Yao-Wen Mao <yaowen@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.