aboutsummaryrefslogtreecommitdiffstats
path: root/sound/usb/mixer.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-03-31[media] Revert "[media] sound/usb: Use Media Controller API to share media resources"Mauro Carvalho Chehab1-3/+0
Unfortunately, this patch caused several regressions at au0828 and snd-usb-audio, like this one: https://bugzilla.kernel.org/show_bug.cgi?id=115561 It also showed several troubles at the MC core that handles pretty poorly the memory protections and data lifetime management. So, better to revert it and fix the core before reapplying this change. This reverts commit aebb2b89bff0 ("[media] sound/usb: Use Media Controller API to share media resources")' Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-03-03[media] sound/usb: Use Media Controller API to share media resourcesShuah Khan1-0/+3
Change ALSA driver to use Media Controller API to share media resources with DVB and V4L2 drivers on a AU0828 media device. Media Controller specific initialization is done after sound card is registered. ALSA creates Media interface and entity function graph nodes for Control, Mixer, PCM Playback, and PCM Capture devices. snd_usb_hw_params() will call Media Controller enable source handler interface to request the media resource. If resource request is granted, it will release it from snd_usb_hw_free(). If resource is busy, -EBUSY is returned. Media specific cleanup is done in usb_audio_disconnect(). Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-14ALSA: usb-audio: Fix parameter block size for UAC2 control requestsJulian Scheel1-0/+2
USB Audio Class version 2.0 supports three different parameter block sizes for CUR requests, which are 1 byte (5.2.3.1 Layout 1 Parameter Block), 2 bytes (5.2.3.2 Layout 2 Parameter Block) and 4 bytes (5.2.3.3 Layout 3 Parameter Block). Use the correct size according to the specific control as it was already done for UACv1. The allocated block size for control requests is increased to support the 4 byte worst case. Signed-off-by: Julian Scheel <julian@jusst.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-21ALSA: usb-audio: Add Xonar U1 resume supportTakashi Iwai1-2/+0
This time it's about Xonar U1: add the proper resume support for "Digital Playback Switch" element. Also, the status is moved into kcontrol private_value from usb_mixer_interface struct field. One more cut. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-21ALSA: usb-audio: Add audigy2nx resume supportTakashi Iwai1-1/+0
Rewrite the code to handle LEDs on audigy2nx and co for supporting the proper resume. A new internal helper function add_single_ctl_with_resume() is introduced to manage the usb_mixer_elem_list more easily. Also while we're at it, move audigy2nx_leds[] in usb_mixer_interface struct into the private_value of each kctl, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-21ALSA: usb-audio: Allow quirks to handle own resume and proc dumpTakashi Iwai1-5/+21
So far, we blindly assumed that the all usb-audio mixer elements follow the standard and apply the standard resume method for the registered elements in the id_elems[] list. However, some quirks really need the own resume and it's incomplete for now. This patch enhances the resume handling in two folds: - split some fields in struct usb_mixer_elem_info into a smaller header struct (usb_mixer_elem_list) for keeping the minimal information in the linked-list; the usb_mixer_elem_info embeds this header struct instead - add resume and dump callbacks to usb_mixer_elem_list struct to allow quirks providing the own methods For the standard mixer elements, these new callbacks are set to the standard ones as default, thus there is no functional change by this patch yet. The dump and resume callbacks are typedef'ed for ease of later patches using arrays of such function pointers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-13ALSA: usb-audio: make set_*_mix_values functions publicChris J Arges1-0/+8
Make the functions set_cur_mix_value and get_cur_mix_value accessible by files that include mixer.h. In addition make usb_mixer_elem_free accessible. This allows reuse of these functions by mixers that may require quirks. The following summarizes the renamed functions: - set_cur_mix_value -> snd_usb_set_cur_mix_value - get_cur_mix_value -> snd_usb_get_cur_mix_value - usb_mixer_elem_free -> snd_usb_mixer_elem_free Signed-off-by: Chris J Arges <chris.j.arges@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-13ALSA: usb-audio: Add private_data pointer to usb_mixer_elem_infoChris J Arges1-0/+1
Add a private_data pointer to usb_mixer_elem_info to allow other mixer implementations to extend the structure as necessary. Signed-off-by: Chris J Arges <chris.j.arges@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-04ALSA: usb-audio: Pass direct struct pointer instead of list_headTakashi Iwai1-1/+1
Some functions in mixer.c and endpoint.c receive list_head instead of the object itself. This is not obvious and rather error-prone. Let's pass the proper object directly instead. The functions in midi.c still receive list_head and this can't be changed since the object definition isn't exposed to the outside of midi.c, so left as is. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-03ALSA: usb-audio: Resume mixer values properlyTakashi Iwai1-2/+5
Implement reset_resume callback so that the mixer values are properly restored. Still no boot quirks are called, so it might not work well on some devices. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-29ALSA: usb-audio: add control index offsetEldad Zack1-0/+1
Currently, channel IDs exceeding 31 (0x1f) cannot be used. The channel ID is derived from the cmask. Extending cmask to a 64-bit type would only allow it to go up to 63 (0x3f). Some devices have channel IDs exceeding that as well. To address that, add an offset to the mixer element which is then accounted for in the UAC set/get functions. Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-24ALSA: usb-audio: Rename and export mixer_vol_tlvFelix Homann1-0/+3
Rename mixer_vol_tlv to snd_usb_mixer_vol_tlv and export it to make it reuseable in mixer_quirks.c. Signed-off-by: Felix Homann <linuxaudio@showlabor.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-04ALSA: snd-usb: operate on given mixer interface onlyDaniel Mack1-0/+1
When creating the mixers for an USB audio device, the current code looks at the host interface stored in mixer->chip->ctrl_if. Change this and rather keep a local pointer to the interface that was given when snd_usb_create_mixer() was called. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-by: Nicolai Krakowiak <nicolai.krakowiak@gmail.com> Reported-by: Lean-Yves LENHOF <jean-yves@lenhof.eu.org> Acked-by: Clemens Ladisch <clemens@ladisch.de> Cc: stable@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-25ALSA: usb-audio: export snd_usb_feature_unit_ctlDaniel Mack1-1/+10
In order to allow quirks functions to hook up to the standard feature unit op tables, this patch exports a pointer to the struct that is used internally. That way, all the code handling the control can be kept private, and external code can reference the symbol to re-use it. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-25ALSA: usb-audio: rework add_control_to_empty()Daniel Mack1-0/+3
This patch renames add_control_to_empty() to snd_usb_mixer_add_control() and exports it, so the quirks functions can make use of it. Also, as "struct mixer_build" is private to mixer.c, rewrite the function to take an argument of type "struct usb_mixer_interface" instead. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-03-11ALSA: usbaudio: fix suspend/resumeOliver Neukum1-0/+2
- ESHUTDOWN must be correctly handled - the optional interrupt endpoint's URB must be stopped and restarted Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-06-23ALSA: usb-audio: simplify control interface accessDaniel Mack1-1/+0
As the control interface is now carried in struct snd_usb_audio, we can simplify the API a little and also drop the private ctrlif field from struct usb_mixer_interface. Also remove a left-over function prototype in pcm.h. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-05-31ALSA: usb-audio: support partially write-protected UAC2 controlsDaniel Mack1-0/+2
So far, UAC2 controls are marked read-only if any of the channels are marked read-only in the descriptors. Change this behaviour and - mark them writeable unless all channels are read-only - store the read-only mask in usb_mixer_elem_info and - check the mask again in set_cur_mix_value(), and bail out for write-protected channels. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-12ALSA: usb-mixer: Add support for Audio Class v2.0Daniel Mack1-0/+3
USB Audio Class v2.0 compliant devices have different descriptors and a different way of setting/getting min/max/res/cur properties. This patch adds support for them. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-12ALSA: usbmixer: rename usbmixer.[ch] -> mixer.[ch]Daniel Mack1-0/+52
For clearer namespace, also rename usbmixer_maps.c -> mixer_maps.c Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>