aboutsummaryrefslogtreecommitdiffstats
path: root/sound/usb (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2007-01-09[ALSA] usb-audio: work around wrong frequency in CM6501 descriptorsClemens Ladisch1-1/+7
The C-Media CM6501 chip's descriptors say that altsetting 5 supports 48 kHz, but it actually plays at 96 kHz. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-12-20[ALSA] sound/usb/usbaudio: Handle return value of usb_register()Tobias Klauser1-2/+1
Handle the return value of usb_register() in the module_init function. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-12-07[PATCH] mm: incorrect VM_FAULT_OOM returns from driversNick Piggin1-1/+1
Some drivers are returning OOM when it is not in response to a memory shortage. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Dave Airlie <airlied@linux.ie> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-01usb: usbmixer free kill urb cleanupMariusz Kozlowski1-6/+3
- usb_free_urb() cleanup - usb_kill_urb() cleanup Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01usb: usbmidi kill urb cleanupMariusz Kozlowski1-1/+1
- usb_kill_urb() cleanup Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-11-28[ALSA] Fix hang-up at disconnection of usb-audioTakashi Iwai1-1/+2
Fix hang-up at disconnection of usb-audio devices while accessing PCM. Don't handle PCM operations any more after shutdown flag is set. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-10-06[ALSA] Repair snd-usb-usx2y for usb 2.6.18Karsten Wiese2-22/+11
urb->start_frame rolls over beyond MAX_INT now. This is for stable kernel and stable alsa. Signed-off-by: Karsten Wiese <annabellesgarden@yahoo.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-10-06[ALSA] Fix bug in snd-usb-usx2y's usX2Y_pcms_lock_check()Karsten Wiese1-1/+1
Fix bug in snd-usb-usx2y's usX2Y_pcms_lock_check() substream can be NULL...... in mainline, bug was introduced by: 2006-06-22 [ALSA] Add O_APPEND flag support to PCM Signed-off-by: Karsten Wiese <annabellesgarden@yahoo.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells6-17/+16
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-01[PATCH] kmemdup: some usersAlexey Dobriyan2-9/+5
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27USB: Dealias -110 code (more complete)Pete Zaitcev1-3/+3
The purpose of this patch is to split off the case when a device does not reply on the lower level (which is reported by HC hardware), and a case when the device accepted the request, but does not reply at upper level. This redefinition allows to diagnose issues easier, without asking the user if the -110 happened "immediately". The usbmon splits such cases already thanks to its timestamp, but it's not always available. I adjusted all drivers which I found affected (by searching for "urb"). Out of tree drivers may suffer a little bit, but I do not expect much breakage. At worst they may print a few messages. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-23[ALSA] usb-audio: add mixer control names for the Aureon 5.1 MkIIClemens Ladisch1-0/+24
Add a mixer name map for the TerraTec Aureon 5.1 MkII USB. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] usb-audio: increase number of packets per URBClemens Ladisch1-2/+2
To decrease the USB interrupts rate, increase both the default and the maximum number of packets per URB. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] Support for non-standard rates in USB audio driverLuke Ross1-0/+46
There's at least one USB audio chipset out there which supports only one non-standard rate (ID 0e6a:0310 supports 46875Hz). There's a few other patches for this card which are unsatisfactory because they attempt to map this rate to 44.1k leading to sound distortion. The patch below uses SNDRV_PCM_RATE_KNOT to properly support the non-standard rates where they are available. Signed-off-by: Luke Ross <luke@lukeross.name> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] usb-audio - Fix a typo of CONFIG_PROC_FSTakashi Iwai1-1/+1
Fixed a typo of CONFIG_PROC_FS in usbaudio.c. The stream proc file appears again. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] usb-audio: add more Yamaha devicesClemens Ladisch1-0/+5
Add some quirks for some unknown Yamaha USB MIDI devices. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] Add TLV support to snd-usb-audio driverTakashi Iwai1-0/+27
Added TLV-read support to snd-usb-audio driver for passing the volume dB scale information to user-space. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] Unregister device files at disconnectionTakashi Iwai1-1/+1
Orignally proposed by Sam Revitch <sam.revitch@gmail.com>. Unregister device files at disconnection to avoid the futher accesses. Also, the dev_unregister callback is removed and replaced with the combination of disconnect + free. A new function snd_card_free_when_closed() is introduced, which is used in USB disconnect callback. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-08-03[ALSA] Conversions from kmalloc+memset to k(z|c)allocPanagiotis Issaris1-4/+2
sound: Conversions from kmalloc+memset to k(c|z)alloc. Signed-off-by: Panagiotis Issaris <takis@issaris.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-06-28[ALSA] usb-audio support for Turtle Beach RoadieSam Revitch1-0/+32
From: Sam Revitch <sam.revitch@gmail.com>Recently a Turtle Beach Audio Advantage Roadie device ended up in my possession. It seems to work with the snd-usb-audio driver, but only using the headphone jack in 2-channel mode. The device has a DIN connector carrying six more channels that are otherwise silent. C-Media has freely available documentation for the CM106 chip around which this device is based, and enabling 8-channel output, or 6-channel output with the headphone jack following the front pair is a matter of setting one of its registers. Attached is a patch to try to enable 5.1 output mode at probe time. It seems to work correctly with my device. There is quite list of other configurables for this device that might deserve controls. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-06-22[ALSA] USB midi: Remove duplicate CS_AUDIO_* #definesBen Williamson3-9/+2
Removed the CS_AUDIO_* #defines, which were duplicates of the class-specific USB_DT_CS_* #defines in <linux/usb_ch9.h>. Signed-off-by: Ben Williamson <ben.williamson@greyinnovation.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-06-22[ALSA] usbaudio - Fix a typoTakashi Iwai1-1/+1
Fix a typo introduced by the last fix. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-06-22[ALSA] usb-audio: add workaround for CSR Bluetooth Headphones (Saitek A-250)Clemens Ladisch1-3/+4
Some devices don't have the required class-specific endpoint descriptors. Instead of making this case an error, this patch makes the driver guess the endpoint attributes. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-06-22[ALSA] add support for SB Live! 24-Bit External remote controlRaimonds Cicans1-28/+40
This patch rewrites the remote control code to use a table for the peculiarities of the various SB models, and adds support for a third model. Signed-off-by: Raimonds Cicans <ray@vardes.lv> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-06-22[ALSA] rawmidi: add get_port_info callback for sequencer information flagsClemens Ladisch1-70/+130
Add a get_port_info callback to the snd_rawmidi_global_ops structure to allow the USB MIDI driver to supply information flags for the sequencer ports created by seq_midi. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-06-22[ALSA] Add O_APPEND flag support to PCMTakashi Iwai1-1/+1
Added O_APPEND flag support to PCM to enable shared substreams among multiple processes. This mechanism is used by dmix and dsnoop plugins. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-06-22[ALSA] Remove unneeded read/write_size fields in proc text opsTakashi Iwai2-4/+4
Remove unneeded read/write_size fields in proc text ops. snd_info_set_text_ops() is fixed, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-04-27[ALSA] add another Phase 26 quirkClemens Ladisch1-0/+9
Add a quirk entry for the TerraTec Phase 26 with yet another product ID. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-03-31[ALSA] Test volume resolution of usb audio at initializationTakashi Iwai1-3/+34
Test the volume of usb audio whether actually it works and adjusts the resolution value according to it. Some USB audio devices report a lower resolution than it reacts. The only possible check is to write and read a volume value. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-28[PATCH] Typo fixesAlexey Dobriyan1-1/+1
Fix a lot of typos. Eyeballed by jmc@ in OpenBSD. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22[ALSA] fix resource leak in usbmixerJesper Juhl1-0/+1
Modules: USB generic driver We may leak 'namelist' in sound/usb/usbmixer.c::parse_audio_selector_unit() Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] usb-audio: add Maya44 mixer control namesClemens Ladisch1-0/+20
Modules: USB generic driver Add mixer control names for the AudioTrak Maya44 USB. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-03-22[ALSA] usb-audio: add Casio PL-40R supportClemens Ladisch1-0/+9
Modules: USB generic driver Add a quirk entry for the Casio PL-40R. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-03-22[ALSA] usb-audio: add MDP-5/EZ-J24 supportClemens Ladisch1-0/+2
Modules: USB generic driver Add support for the Yamaha MDP-5 and EZ-J24. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-03-22[ALSA] Fixes audiophile usb analog capture with the new device_setup parameterThibault LE MEUR1-1/+51
Modules: Documentation,USB generic driver The patch adds the 'device_setup' module parameter and a specific quirk to correctly initialize the audiophile usb device: this fixes the distorted sound bug on the Analog capture port. Backward compatibility is achieved by simply omitting the new parameter. Signed-off-by: Thibault LE MEUR <Thibault.LeMeur@supelec.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] usb-audio: add error message about missing split iso supportClemens Ladisch1-0/+4
Modules: USB generic driver Add an error message for -ENOSYS for situations when split iso support is needed but not enabled. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-03-22[ALSA] usb-audio: change Casio quirk product nameClemens Ladisch1-1/+2
Modules: USB generic driver Use a generic name for USB device 0x07cf:0x6802 because this ID is used by several devices without a product ID. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-03-22[ALSA] usb-audio: show USB error descriptionsClemens Ladisch1-4/+35
Modules: USB generic driver When usb_submit_urb() fails, show an error description instead of just the error code. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-03-22[ALSA] usb-audio: add Casio AP-80R supportClemens Ladisch1-0/+11
Modules: USB generic driver Add a quirk for the Casio AP-80R. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-03-22[ALSA] fix usbmixer double kfreeDave Jones1-1/+0
Modules: USB generic driver snd_ctl_add() kfree's the kcontrol already if we fail there, so this driver is currently doing a double kfree. Coverity bug #959 Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] usb-audio: optimize snd_usbmidi_count_bits()Clemens Ladisch1-3/+3
Modules: USB generic driver Reduce the code size of the snd_usbmidi_count_bits() function by using simpler operations. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-03-22[ALSA] no need to check pointers passed to vfree() for NULLJesper Juhl1-4/+3
Modules: Digigram VX core,USB generic driver There's no need to check pointers passed to vfree() for NULL. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] usb-audio: add Miditech Play'n Roll supportClemens Ladisch1-0/+9
Modules: USB generic driver Add a quirk entry for the Miditech Play'n Roll. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-03-22[ALSA] usb-audio: rename QUIRK_MIDI_MIDITECH to QUIRK_MIDI_CMEClemens Ladisch4-8/+10
Modules: USB generic driver Rename QUIRK_MIDI_MIDITECH to QUIRK_MIDI_CME because Miditech keyboards are built by CME and use the same protocol, and don't force a Miditech product name for the USB ID used by both Miditech and CME UF-x keyboards. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-03-22[ALSA] usb-audio: add UM-1EX/UM-2EX informationClemens Ladisch1-2/+3
Modules: USB generic driver Add comments with information about UM-1EX/UM-2EX devices. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-03-22[ALSA] usb-audio: fix number of G-70 portsClemens Ladisch1-2/+2
Modules: USB generic driver The G-70 has one MIDI port in each direction, no two. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-03-22[ALSA] snd_pcm_format_name() is no longer exportedJaroslav Kysela1-1/+1
Modules: PCM Midlevel,USB generic driver Because snd_pcm_format_name() function is used only for informational purposes, it is no longer exported from the PCM midlevel to reduce space and dependency. usbaudio module shows only numeric value for format. Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-03-22[ALSA] usb-audio: add Roland G-70 supportClemens Ladisch1-1/+14
Modules: USB generic driver Add a quirk entry for the Roland G-70. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-03-22[ALSA] semaphore -> mutex (Archs, misc buses)Ingo Molnar5-19/+20
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] usb-audio: add Edirol PC-50 supportClemens Ladisch1-1/+14
Modules: USB generic driver Add a quirk entry for the Edirol PC-50. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>