aboutsummaryrefslogtreecommitdiffstats
path: root/sound (follow)
AgeCommit message (Collapse)AuthorFilesLines
2007-10-16[ALSA] cs5535audio: drop unused bus master stuffAndres Salomon2-51/+4
We really only care about the first two bus masters (playback and capture). There's no need to have unused BM code lying around, so let's get rid of it. If for some reason we trigger an IRQ for some BM that we're not using.. well, that warrants spitting out an error message (imo). Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] cs5535audio: fix ACC_BM[x]_CMD register handlingAndres Salomon1-5/+5
According to 6.3.2.7 of the cs5535/cs5536 data sheets, the ACC_BM[x]_CMD registers are only 8 bits wide. This driver treats them as 32 bits wide, and also has bits in the wrong place. Simple fix to the definitions. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] cs5535audio: update PCI device handling in suspend/resumeAndres Salomon1-2/+10
Save the PCI state before disabling the device, and add some error checking. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] cs5535audio: fix PRD register save/restore power management raceAndres Salomon3-10/+7
In the suspend path, we currently save the PRD registers and then disable DMA. This is racy; the sound hardware might update the PRD register as it finishes processing some DMA pages between when we've saved the PRD registers and when DMA actually gets disabled. Furthermore, we actively check whether or not DMA is enabled before saving PRD registers; there's no reason to do that, as the PRD registers should not update when we twiddle the ACC_BM[x]_CMD register(s). Worst case, we save the PRD registers twice; even powering down the ACC shouldn't mess with the PRD registers (according to the 5536 data sheet, section 5.3.7.4, power-down procedure). This patch reworks all that to first disable DMA, and then save PRD registers. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] cs5535audio: correctly set dma->substreamAndres Salomon1-0/+2
We're never actually setting dma->substream to the current substream; that means the dma->substream checks that we do in the suspend/resume path are never satisfied, and the PRD registers are never correctly managed. This changes it so that we set the substream when constructing the specific bus master DMA, and unsetting it when we tear down the BM's DMA. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-codec - Fix support for sigmatel codecs that have 2 or more ADCsMaxim Levitsky1-40/+57
1) Create seperate mixer controls for each ADC 2) Make number of substreams of capture PCM device be equal to number of ADCs Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-codec - make volume knob, the master volume for sigmatel codecsMaxim Levitsky1-0/+48
VolumeKnob is present on most sigmatel codecs, it allows to decrease volume of all DACs at once, it is a kind of post-procesing volume. Note that all output amps of sigmatel only decrease volume, and all input amps only increase volume. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-codec - add support for analog loopback to STAC9204/9205/922x/927xMaxim Levitsky1-0/+58
The analog loopback routes the sound just before it enters ADC0 to output of DAC0. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-codec - add support for swapping center/LFE channels to STAC codecsMaxim Levitsky1-4/+72
Center/LFE channels are located on same jack, so it can be usefull to swap them. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-intel - Fix resume logic, when dynamic power managment is onMaxim Levitsky3-7/+21
Comment in hda_intel.c states that 'the explicit resume is needed only when POWER_SAVE isn't set', but this is not true. There is no code that will automaticly power up the codec on resume, but only code that powers it up when user accesses it. So if user leaves a sound playing, codec will not be powered To fix that I check if there are any codecs that should be powered codec->power_count, and if so I power them up together with main controller. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-intel - fix a race in dynamic power managmentMaxim Levitsky1-1/+3
codec->power_transition is supposed to be true while codec is going to be shut off if in the mean time somebody calls snd_hda_power_up, hda_power_work will not shut down the codec, but nether will clear codec->power_transition, thus it stays on forever. Fix this. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] cmipci: show real chip name in card nameClemens Ladisch1-6/+8
The '-MCx' suffix that is expected by alsa-lib is only needed in the card driver string, so we can show the actual chip name in the shortname. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] cmipci: check that the legacy MIDI port worksClemens Ladisch1-0/+7
Check that the UART_EN bit actually enabled the MPU-401 port. Apparently, C-Media thinks that it is a good idea to be paranoid here. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] cmipci: do not check for integrated FM/MIDI ports with chip version 37Clemens Ladisch1-3/+3
Integrated MPU-401/OPL3 ports are available with chip version 39 and later, so we do not test for the port with version 37. Now that the test is known to work, we can again enable the MIDI port by default. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] cmipci: add 96 kHz supportClemens Ladisch1-3/+35
Add support for 88.2 kHz and 96 kHz analog and digital playback on CMI8768/CMI8770 chips. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] cmipci: remove invalid channels constraintClemens Ladisch1-1/+0
Remove the constraint that sets the channel limit for the first playback device to that of the second one; the first device supports only stereo. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-codec - Avoid zero NID in line_out_pins[] of STAC codecsTakashi Iwai1-5/+10
The STAC codes adds line_out_pins[] for shared mic/line-inputs accordingly. But, the current code may give a hole with NID=0 in some setting, which results in an error at probe. This patch fixes the problem. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-codec - Fix wrong pin-setup at resume of STAC codecsTakashi Iwai1-4/+13
The resume procedure for STAC codecs overrides the cached values and results in the wrong (reset) PIN state. The patch gets rid of the overriding part and simplifies the resume. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] usb-audio: update quirk for Rane SL 1 (aka. Serato Scratch Live)Mark Hills1-5/+6
Allow the interface's mixer to be used, and give the interface its correct name. Signed-off-by: Mark Hills <mark@pogo.org.uk> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-codec - code cleanups in patch_sigmatel.cMaxim Levitsky1-48/+17
Clean up the mixer entries for Input Source using a macro. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-codec - Fix capture on ALC262 HP machineszhejiang1-3/+13
Fix the index for Front Mic capture source on ALC262 HP machines. Also, added the new capture source list for HP BPC DC7000 series to work properly. From: zhejiang <zhe.jiang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hdsp - Add support for latset RME9632 revisionsRemy Bruno1-12/+12
added support for the latest revision of the 9632 (and hopefully a few following ones). The DSP matrix was not working because of wrong identification of the card in this part of the code. Signed-off-by: Remy Bruno <remy.bruno@trinnov.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hdspm - Fix autosync bugRemy Bruno1-30/+30
* better report of speed mode change failures * autosync_ref control bugfix (was reporting pref_sync_ref instead) (changed HDSPM_AES32_AUTOSYNC_FROM_NONE value to comply with array indexing in snd_hdspm_info_autosync_ref()) * added support for master modes up to 192kHz (clock source control value was restricted up to 96kHz) Signed-off-by: Remy Bruno <remy.bruno@trinnov.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] missing error check in usb sound driverOliver Neukum1-1/+5
usb_set_interface() can fail, even for altsetting 0 Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] usb-audio: add quirk for Serato Scratch Live DJ BoxClemens Ladisch1-0/+10
Add a quirk to detect the Serato Scratch Live DJ Box. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] ac97 - Suppress the reset of audio-codec from modem-codec at resumeTakashi Iwai1-1/+4
On codec chips with both audio and modem functions (e.g. Conexant one), performing AC97_RESET resets the whole registers. When both audio and modem drivers are resumed at the same time, the modem one often is resumed after the audio, and it results in the reset of audio registers (ALSA bug#3333). This patch fixes such a problem. Since the modem codec basically doesn't need AC97_RESET, skip this initialization unless specified as audio. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-codec - Add Mic Boost control with auto-configurationTakashi Iwai1-8/+60
Some codecs need Mic Boost mixer controls for obtaining a proper recording level, but the auto-configuration doesn't create them. This patch adds the creation of mic-boost controls on corresponding codecs. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] Allow shared IRQ for CS5530 deviceTakashi Iwai1-1/+3
CS5530 is a PCI device and often shares the IRQ although the SB common routine tries to allocate it exclusively. This patch allows shared IRQ for CS5530. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] emu10k1: There's no need to cast vmalloc() return value in snd_emu10k1_create()Jesper Juhl1-2/+3
vmalloc() returns void *. no need to cast. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] cmipci: show actual chip name in card longnameClemens Ladisch1-7/+35
Show the actual name of CMI8762/CMI8768/CMI8769/CMI8770 chips in the card longname instead of just using 'CMI8738' for all of them. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] cmipci: remove has_dual_dacClemens Ladisch1-8/+3
Remove the has_dual_dac variable because it was always set. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] cmipci: reorganize chip version detectionClemens Ladisch1-24/+20
Add a case for chip version 39 where no bit is set in register 0Ch, and move the detection of version 39 before that of 8768. This makes the logic more compatible with the driver on that other OS. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] cmipci: make the test for integrated MIDI port address more robustClemens Ladisch1-6/+9
Unused bytes in the I/O register range are likely to have the value 0x00 instead of 0xff, so test against both values when checking for the presence of the integrated MIDI port. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-codec - Fix Dell laptops support with STAC codecsTakashi Iwai1-32/+313
Fixed Dell laptops support with STAC92xx codecs. Many pin-config models are introduced. See ALSA-Configuration.txt for details. The patch taken from ALSA bug#3319, originally by Jorg Prante: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3319 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-codec - Fix ALC268 unsol eventTakashi Iwai1-5/+50
The unsol event of ALC268 is in the standard bit 26. Also, fixed the Acer master controls, and added Extensa 5210 to the quirk list. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-codec - Fix mater mixer switch of ALC262 sony-amd modelTakashi Iwai1-10/+38
Fixed the master mixer switch of ALC272 sony-amd model. It used a simple bind-control, but it resulted in unexpected unmute of speaker output. Now the control checks the HP jack state apropriately, just like fujitsu model. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-intel - Fix compile with gcc-3.xTakashi Iwai1-2/+2
gcc-3.x doesn't like forward inlining: CC [M] sound/pci/hda/hda_codec.o sound/pci/hda/hda_codec.c: In function 'snd_hda_codec_free': sound/pci/hda/hda_codec.c:517: sorry, unimplemented: inlining failed in call to 'free_hda_cache': function body not available sound/pci/hda/hda_codec.c:534: sorry, unimplemented: called from here sound/pci/hda/hda_codec.c:517: sorry, unimplemented: inlining failed in call to 'free_hda_cache': function body not available sound/pci/hda/hda_codec.c:535: sorry, unimplemented: called from here Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] bt87x - Add known PCI ID entriesTakashi Iwai1-0/+4
Added the PCI ID entries for known working devices - Prolink PixelView PV-M4900 - Pinnacle Studio PCTV rave Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] cmipci: fix handling of FM/MIDI port addressesClemens Ladisch2-10/+18
Make sure that the MPU-401 MIDI and OPL-3 FM devices are used only on those chips where they are supported, and that the correct port addresses are used. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] wavefront - Use standard firmware loaderTakashi Iwai2-81/+48
Use the standard firmware loader for loading ICS2115 OS firmware file. This is the last old bad guy that is still using sys_open() and sys_read() calls, and now all should be gone. The patch also adds the missing description of module options related with wavefront_synth.c. Due to this rewrite, user will have to copy or make symlink the firmware file appropriately to the standard firmware path such as /lib/firmware. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-codec - Add missing capture boost for ALC268Takashi Iwai1-0/+6
Added missing capture boost controls for ALC268 codec. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] cmipci: fix MIDI device nameClemens Ladisch1-9/+7
Initialize card->shortname early enough so that the MIDI device can pick it up and does not need to have a generic name. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] usb-audio: add workaround for ESI MIDI Mate/RomIO IIClemens Ladisch1-0/+9
Force low speed USB MIDI devices like the ESI MIDI Mate and RomIO II to use interrupt transfers because the USB core would not be happy about low speed bulk transfers. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] usb-audio: allow low speed MIDI devicesClemens Ladisch1-2/+9
Allow low speed MIDI devices because newer devices from ESI do not support full speed. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] usb-audio: allow output interrupt transfers for MIDIClemens Ladisch1-4/+12
Allow output interrupt transfers for some MIDI devices that require them. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-codec - Add SPDIF support on ALC880 fujitsu modelTakashi Iwai1-0/+1
Some Fujitsu laptops have SPDIF output jack (ALSA bug#3009). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] dbri: driver cleanupKrzysztof Helt1-182/+208
This patch fixes white spaces, spelling and formatting to conform closer to the coding standard of the kernel. It contains few fixes pointed out by the checkpatch.pl script. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-codec - Add support for Haier W66Kailang Yang1-1/+51
1. Support Lenovo 420A (PCI SSID: 0x17aa 0x3bfc) 2. Support Haier W66 (PCI SSID: 0x1991 0x5625) Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-intel - Add probe_mask blacklistTakashi Iwai1-1/+32
Added the black-list of probe_mask option to set the default value for known non-working devices. Currently, Thinkpad *60 and *61 series are set. I'm afraid more will be added to the list in near future... Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-codec - Fix ALC268 acer modelTakashi Iwai1-1/+10
ALC268 has different NIDs from ALC262. Acer model should use NID 0x02 and 0x03 instead of 0x0c and 0x0d for the master volume. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.