aboutsummaryrefslogtreecommitdiffstats
path: root/sound (follow)
AgeCommit message (Collapse)AuthorFilesLines
2014-07-16Merge remote-tracking branch 'asoc/topic/rt286' into HEADMark Brown4-0/+1428
2014-07-16ASoC: Intel: Update FW version readbackJie Yang1-3/+17
Update FW version readback. IPC_GLB_GET_FW_VERSION reads back the ABI version whilst the release version is in the mailbox. Update to use mailbox version for info logging. Signed-off-by: Jie Yang <yang.jie@intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-16ASoC: intel: Cleanup useless ACPI inclusion.Lv Zheng1-3/+0
The sst-haswell-dsp.c is an ACPI independent file, this patch removes ACPI header files for it. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-14ASoC: Intel: mfld: add generic parameter interfaceVinod Koul1-1/+4
This interface will be used by subsequent patches to set/get parameters from DSP Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-14ASoC: Intel: mfld: add dsp error codesVinod Koul1-0/+15
DSP returns error codes for IPC return so add them in driver Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-14ASoC: Intel: add sst shim register start-end variablesVinod Koul1-0/+4
the shim registers start and end can be useful while parsing the shim addresses, so add these Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-14ASoC: rt286: make rt286_i2c_driver staticBard Liao1-1/+1
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-14ASoC: Intel: Start with all memory banks disabledJie Yang1-2/+3
All required banks are enabled during boot procedure. Signed-off-by: Jie Yang <yang.jie@intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-14ASoC: Intel: Use a table for ADSP SRAM shiftJie Yang1-10/+29
Use a table for ADSP IRAM/DRAM bit shift. Signed-off-by: Jie Yang <yang.jie@intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-14ASoC: Intel: Merge wild cat point ADSP DRAM regionsJie Yang1-3/+1
Merge D-SRAM0 D-SRAM1 D-SRAM2 to D-SRAM, for wild cat point ADSP mem regions. Signed-off-by: Jie Yang <yang.jie@intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-07ASoC: RT286: Fix silent at the beginning of streamBard Liao2-1/+24
This patch fix the issue that the output is almost silent at the beginning of starting a playback. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-07ASoC: RT286: move initial settings to _i2c_probeBard Liao1-50/+49
Move codec initial settings from asoc probe to i2c probe. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-07ASoC: RT286: check ID in i2c levelBard Liao1-8/+8
Move ID check from asoc level to i2c level. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-07ASoC: RT286: remove test codeBard Liao1-1/+0
Remove test code. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-04ASoC: add RT286 CODEC driverBard Liao4-0/+1407
This patch adds Realtek ALC286 codec driver. ALC286 is a dual mode codec, which can run as HD-A or I2S mode. It is controlled by HD-A verb commands via I2C protocol. The following is the I/O difference between ALC286 and general I2S codecs. 1. A HD-A verb command contains three parts, NID, VID, and PID. And an I2S command contains only two parts: address and data. 2. Not only the register address is written, but the read command also includes the entire write command. 3. rt286 uses different registers for read and write the same bits. We map verb command to regmap structure. However, we read most registers from cache to prevent the asymmetry read/write issue in rt286. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Gustaw Lewandowski <gustaw.lewandowski@intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-24ASoC: Intel: byt-max98090: Do not change speaker and DMIC with jack stateJarkko Nikula1-8/+0
Kernel should not enable/disable speakers and digital microphone whenever jack is inserted/removed. This is more use-case than kernel specific decision. For instance one may want to play VoIP ring tones using both speakers and headphone but play music only from one of them. Because of above reason remove "Ext Spk" and "Int Mic" update when jack state is changed. Also this update was illogical anyway: "Ext Spk" was enabled when jack was inserted and disabled when jack was removed. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-23ASoC: Intel: use common stream allocation method for compressed streamVinod Koul2-7/+11
As added in previosu patch along with stream to piep conversion si required for compressed audio too Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-23ASoC: Intel: add mrfld pipelinesVinod Koul3-9/+139
Merrifield DSP used various pipelines to identify the streams and processing modules. Add these defination in the pcm driver and also add a table for device entries to firmware pipeline id conversion Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-22ASoC: Intel: mfld-pcm: modularize stream allocation codeVinod Koul2-33/+71
Tis will be used to add table based support for pcm front ends in subsequent patches Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-22ASoC: Intel: add the mrfld fw IPC definationsVinod Koul1-11/+403
This will be used to update current driver as well as in support for the mrfld patches Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-21ASoc: Intel: mfld-pcm: report pcm delayVinod Koul2-0/+2
Now the DSP is capable of reporting the delay, report it to upper layers Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-21ASoC: Intel: mfld-pcm rename period callback argVinod Koul2-7/+7
The argument was called mad_substream which is no longer apt as older driver is not used anymore so rename as arg Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-21ASoC: Intel: mfld_pcm: move stream handling to dai_opsVinod Koul1-49/+63
This helps us to handle pcm and compress ops seperately and per dai Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-21ASoC: Intel: byt-rt5640: Enable headset mic bias voltageJarkko Nikula1-0/+1
Connect "Headset Mic" to "MICBIAS1" supply widget of RT5640 in order to enable bias voltage for headset microphones. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-21ASoC: Intel: Show Baytrail SST DSP firmware details during initJarkko Nikula1-0/+30
DSP initialization complete message IPC_IA_FW_INIT_CMPLT is a large message carrying firmware details in mailbox. Read and show those details during init in order to be able to get that information to QA reports. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-13Merge tag 'sound-fix-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds14-54/+145
Pull sound fixes from Takashi Iwai: "Most of changes are small and easy cleanup or fixes: - a few HD-audio Realtek codec fixes and quirks - Intel HDMI audio fixes for Broadwell and Haswell / ValleyView - FireWire sound stack cleanups - a couple of sequencer core fixes - compress ABI fix for 64bit - conversion to modern ktime*() API" * tag 'sound-fix-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits) ALSA: hda/realtek - Add more entry for enable HP mute led ALSA: hda - Add quirk for external mic on Lifebook U904 ALSA: hda - fix a fixup value for codec alc293 in the pin_quirk table ALSA: intel8x0: Use ktime and ktime_get() ALSA: core: Use ktime_get_ts() ALSA: hda - verify pin:converter connection on unsol event for HSW and VLV ALSA: compress: Cancel the optimization of compiler and fix the size of struct for all platform. ALSA: hda - Add quirk for ABit AA8XE Revert "ALSA: hda - mask buggy stream DMA0 for Broadwell display controller" ALSA: hda - using POS_FIX_LPIB on Broadwell HDMI Audio ALSA: hda/realtek - Add support of ALC667 codec ALSA: hda/realtek - Add more codec rename ALSA: hda/realtek - New vendor ID for ALC233 ALSA: hda - add two new pin tables ALSA: hda/realtek - Add support of ALC891 codec ALSA: seq: Continue broadcasting events to ports if one of them fails ALSA: bebob: Remove unused function prototype ALSA: fireworks: Remove meaningless mutex_destroy() ALSA: fireworks: Remove a constant over width to which it's applied ALSA: fireworks: Improve comments about Fireworks transaction ...
2014-06-13ALSA: hda/realtek - Add more entry for enable HP mute ledKailang Yang1-0/+14
More HP machine need mute led support. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-13ALSA: hda - Add quirk for external mic on Lifebook U904David Henningsson1-0/+9
According to the bug reporter (Данило Шеган), the external mic starts to work and has proper jack detection if only pin 0x19 is marked properly as an external headset mic. AlsaInfo at https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1328587/+attachment/4128991/+files/AlsaInfo.txt Cc: stable@vger.kernel.org BugLink: https://bugs.launchpad.net/bugs/1328587 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-13ALSA: hda - fix a fixup value for codec alc293 in the pin_quirk tableHui Wang1-1/+1
The fixup value for codec alc293 was set to ALC269_FIXUP_DELL1_MIC_NO_PRESENCE by a mistake, if we don't fix it, the Dock mic will be overwriten by the headset mic, this will make the Dock mic can't work. Cc: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-12ALSA: intel8x0: Use ktime and ktime_get()Thomas Gleixner1-6/+4
do_posix_clock_monotonic_gettime() is a leftover from the initial posix timer implementation which maps to ktime_get_ts() and returns the monotonic time in a timespec. Use ktime based ktime_get() and use the ktime_delta_us() function to calculate the delta instead of open coding the timespec math. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-12ALSA: core: Use ktime_get_ts()Thomas Gleixner1-2/+2
do_posix_clock_monotonic_gettime() is a leftover from the initial posix timer implementation which maps to ktime_get_ts(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-12ALSA: hda - verify pin:converter connection on unsol event for HSW and VLVMengdong Lin1-1/+9
This patch will verify the pin's coverter selection for an active stream when an unsol event reports this pin becomes available again after a display mode change or hot-plug event. For Haswell+ and Valleyview: display mode change or hot-plug can change the transcoder:port connection and make all the involved audio pins share the 1st converter. So the stream using 1st convertor will flow to multiple pins but active streams using other converters will fail. This workaround is to assure the pin selects the right conveter and an assigned converter is not shared by other unused pins. Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-10ALSA: hda - Add quirk for ABit AA8XEDavid Henningsson1-0/+1
Bios does not set up the pin config default correctly (everything is set to zero). Reporter claims that 6stack-dig and 6stack-automute solve the problem. Alsa-info at http://www.alsa-project.org/db/?f=376c0804cbdde90bcd2cb94799407cb1cacf5d05 BugLink: https://bugs.launchpad.net/bugs/1319291 Reported-by: Stefano Statuti <stefano.statuti@hotmail.it> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-09Revert "ALSA: hda - mask buggy stream DMA0 for Broadwell display controller"Libin Yang1-6/+0
This reverts commit 7189eb9b8f7962474956196c301676470542f253. It will use LPIB to get the DMA position on Broadwell HDMI Audio. Signed-off-by: Libin Yang <libin.yang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-09ALSA: hda - using POS_FIX_LPIB on Broadwell HDMI AudioLibin Yang1-1/+7
Broadwell HDMI can't use position buffer reliably, force to use LPIB Signed-off-by: Libin Yang <libin.yang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-06ALSA: hda/realtek - Add support of ALC667 codecKailang Yang1-0/+1
New codec suooprt of ALC667. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-06ALSA: hda/realtek - Add more codec renameKailang Yang1-0/+15
Some vendor has special bonding options. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-06ALSA: hda/realtek - New vendor ID for ALC233Kailang Yang1-0/+1
This is compatible with ALC255. It is use for Lenovo. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-06ALSA: hda - add two new pin tablesHui Wang1-6/+41
These two new pin tables can fix headset mic problems for several new Dell machines. And also delete some machines from old quirk table since the existing pin talbes already cover them. Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-05ALSA: hda/realtek - Add support of ALC891 codecKailang Yang1-0/+1
New codec support for ALC891. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-04Merge tag 'sound-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into nextLinus Torvalds300-5237/+35826
Pull sound updates from Takashi Iwai: "At this time, majority of changes come from ASoC world while we got a few new drivers in other places for FireWire and USB. There have been lots of ASoC core cleanups / refactoring, but very little visible to external users. ASoC: - Support for specifying aux CODECs in DT - Removal of the deprecated mux and enum macros - More moves towards full componentisation - Removal of some unused I/O code - Lots of cleanups, fixes and enhancements to the davinci, Freescale, Haswell and Realtek drivers - Several drivers exposed directly in Kconfig for use with simple-card - GPIO descriptor support for jacks - More updates and fixes to the Freescale SSI, Intel and rsnd drivers - New drivers for Cirrus CS42L56, Realtek RT5639, RT5642 and RT5651 and ST STA350, Analog Devices ADAU1361, ADAU1381, ADAU1761 and ADAU1781, and Realtek RT5677 HD-audio: - Clean up Dell headset quirks - Noise fixes for Dell and Sony laptops - Thinkpad T440 dock fix - Realtek codec updates (ALC293,ALC233,ALC3235) - Tegra HD-audio HDMI support FireWire-audio: - FireWire audio stack enhancement (AMDTP, MIDI), support for incoming isochronous stream and duplex streams with timestamp synchronization - BeBoB-based devices support - Fireworks-based device support USB-audio: - Behringer BCD2000 USB device support Misc: - Clean up of a few old drivers, atmel, fm801, etc" * tag 'sound-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (480 commits) ASoC: Fix wrong argument for card remove callbacks ASoC: free jack GPIOs before the sound card is freed ALSA: firewire-lib: Remove a comment about restriction of asynchronous operation ASoC: cache: Fix error code when not using ASoC level cache ALSA: hda/realtek - Fix COEF widget NID for ALC260 replacer fixup ALSA: hda/realtek - Correction of fixup codes for PB V7900 laptop ALSA: firewire-lib: Use IEC 61883-6 compliant labels for Raw Audio data ASoC: add RT5677 CODEC driver ASoC: intel: The Baytrail/MAX98090 driver depends on I2C ASoC: rt5640: Add the function "get_clk_info" to RL6231 shared support ASoC: rt5640: Add the function of the PLL clock calculation to RL6231 shared support ASoC: rt5640: Add RL6231 class device shared support for RT5640, RT5645 and RT5651 ASoC: cache: Fix possible ZERO_SIZE_PTR pointer dereferencing error. ASoC: Add helper functions to cast from DAPM context to CODEC/platform ALSA: bebob: sizeof() vs ARRAY_SIZE() typo ASoC: wm9713: correct mono out PGA sources ALSA: synth: emux: soundfont.c: Cleaning up memory leak ASoC: fsl: Remove dependencies of boards for SND_SOC_EUKREA_TLV320 ASoC: fsl-ssi: Use regmap ASoC: fsl-ssi: reorder and document fsl_ssi_private ...
2014-06-04ALSA: seq: Continue broadcasting events to ports if one of them failsAdam Goode1-12/+24
Sometimes PORT_EXIT messages are lost when a process is exiting. This happens if you subscribe to the announce port with client A, then subscribe to the announce port with client B, then kill client A. Client B will not see the PORT_EXIT message because client A's port is closing and is earlier in the announce port subscription list. The for each loop will try to send the announcement to client A and fail, then will stop trying to broadcast to other ports. Killing B works fine since the announcement will already have gone to A. The CLIENT_EXIT message does not get lost. How to reproduce problem: *** termA $ aseqdump -p 0:1 0:1 Port subscribed 0:1 -> 128:0 *** termB $ aseqdump -p 0:1 *** termA 0:1 Client start client 129 0:1 Port start 129:0 0:1 Port subscribed 0:1 -> 129:0 *** termB 0:1 Port subscribed 0:1 -> 129:0 *** termA ^C *** termB 0:1 Client exit client 128 <--- expected Port exit as well (before client exit) Signed-off-by: Adam Goode <agoode@google.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-04ALSA: bebob: Remove unused function prototypeTakashi Sakamoto1-2/+0
snd_bebob_stream_map() is not defined. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-04ALSA: fireworks: Remove meaningless mutex_destroy()Takashi Sakamoto1-1/+0
Currently mutex_destroy() is called in module's cleanup function. But after cleaned up, this mutex is automatically released. So this function call is meaningless. [fixed a typo in changelog by tiwai] Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-04ALSA: fireworks: Remove a constant over width to which it's appliedTakashi Sakamoto1-1/+0
The constants of enum snd_efw_grp_type is for struct snd_efw_phys_grp.type. But this member is 1 byte. Although the value is between 0x00-0xff, a constant has 0x10000. This constant is meaningless. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-04ALSA: fireworks: Improve comments about Fireworks transactionTakashi Sakamoto1-8/+8
It includes descriptions to cause misreading. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-04ALSA: fireworks: Use safer way to arrange ring buffer pointerTakashi Sakamoto2-2/+2
To reverse a pointer for the ring buffer, subtraction by buffer size is better than assignment to the beginning of the buffer. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-04ALSA: fireworks/bebob: Shorten critical section for stream_stop_duplex()Takashi Sakamoto2-4/+4
All assignment for local variables in these functions are not related to critical section. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-04ALSA: seq: correctly detect input buffer overflowAdam Goode1-1/+1
snd_seq_event_dup returns -ENOMEM in some buffer-full conditions, but usually returns -EAGAIN. Make -EAGAIN trigger the overflow condition in snd_seq_fifo_event_in so that the fifo is cleared and -ENOSPC is returned to userspace as stated in the alsa-lib docs. Signed-off-by: Adam Goode <agoode@google.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-03Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into nextLinus Torvalds1-2/+2
Pull core locking updates from Ingo Molnar: "The main changes in this cycle were: - reduced/streamlined smp_mb__*() interface that allows more usecases and makes the existing ones less buggy, especially in rarer architectures - add rwsem implementation comments - bump up lockdep limits" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits) rwsem: Add comments to explain the meaning of the rwsem's count field lockdep: Increase static allocations arch: Mass conversion of smp_mb__*() arch,doc: Convert smp_mb__*() arch,xtensa: Convert smp_mb__*() arch,x86: Convert smp_mb__*() arch,tile: Convert smp_mb__*() arch,sparc: Convert smp_mb__*() arch,sh: Convert smp_mb__*() arch,score: Convert smp_mb__*() arch,s390: Convert smp_mb__*() arch,powerpc: Convert smp_mb__*() arch,parisc: Convert smp_mb__*() arch,openrisc: Convert smp_mb__*() arch,mn10300: Convert smp_mb__*() arch,mips: Convert smp_mb__*() arch,metag: Convert smp_mb__*() arch,m68k: Convert smp_mb__*() arch,m32r: Convert smp_mb__*() arch,ia64: Convert smp_mb__*() ...
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.