| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
TC Electronic Studio Konnekt 48 is an application of combination of
WaveFront Dice II STD and TC Applied Technologies (TCAT) TCD2210 (Dice
Mini). The latter is on a board with BNC and optical interfaces, thus
used for signal processing for word clock, S/PDIF and ADAT. This model
doesn't support TCAT extended application protocol. For such devices,
ALSA dice driver needs to have hard-coded parameters for stream formats.
This commit fixes stream format parameters for this model. Unfortunately, at
sampling transmission frequencies over 48.0kHz, I confirmed that current
ALSA dice driver doesn't drive the device appropriately to generate sounds
(silence). I guess that this comes from timestamping quirk of Dice-based
devices, which I reported.
[alsa-devel] Dice packet sequence quirk and ALSA firewire stack in Linux 4.6
http://mailman.alsa-project.org/pipermail/alsa-devel/2016-May/107715.html
$ cd linux-firewire-utils/src
$ python2 crpp < /sys/bus/firewire/devices/fw1/config_rom
ROM header and bus information block
-----------------------------------------------------------------
400 04044a26 bus_info_length 4, crc_length 4, crc 18982
404 31333934 bus_name "1394"
408 e0ff8112 irmc 1, cmc 1, isc 1, bmc 0, pmc 0, cyc_clk_acc 255,
max_rec 8 (512), max_rom 1, gen 1, spd 2 (S400)
40c 00016604 company_id 000166 |
410 08a65810 device_id 0408a65810 | EUI-64 0001660408a65810
root directory
-----------------------------------------------------------------
414 00062ab9 directory_length 6, crc 10937
418 03000166 vendor
41c 8100000a --> descriptor leaf at 444
420 17000022 model
424 8100000f --> descriptor leaf at 460
428 0c0087c0 node capabilities per IEEE 1394
42c d1000001 --> unit directory at 430
unit directory at 430
-----------------------------------------------------------------
430 0004d5c5 directory_length 4, crc 54725
434 12000166 specifier id
438 13000001 version
43c 17000022 model
440 8100000f --> descriptor leaf at 47c
descriptor leaf at 444
-----------------------------------------------------------------
444 0006c490 leaf_length 6, crc 50320
448 00000000 textual descriptor
44c 00000000 minimal ASCII
450 54432045 "TC E"
454 6c656374 "lect"
458 726f6e69 "roni"
45c 63000000 "c"
descriptor leaf at 460
-----------------------------------------------------------------
460 0006e08e leaf_length 6, crc 57486
464 00000000 textual descriptor
468 00000000 minimal ASCII
46c 53747564 "Stud"
470 696f4b6f "ioKo"
474 6e6e656b "nnek"
478 74343800 "t48"
descriptor leaf at 47c
-----------------------------------------------------------------
47c 0006e08e leaf_length 6, crc 57486
480 00000000 textual descriptor
484 00000000 minimal ASCII
488 53747564 "Stud"
48c 696f4b6f "ioKo"
490 6e6e656b "nnek"
494 74343800 "t48"
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Trivial fix to spelling mistake in string
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Late omap soc changes for v4.18 merge window
This series contains two omap1 ams-delta GPIO clean-up patches to get
started with removal of hard-coded GPIO numbers from drivers. And then
the removal of board mach includes from drivers. The second patch mostly
touches the ams-delta audio driver but is included here because of the
removal of the latch gpios and is acked by Mark Brown.
And there are two more am437x related PM patches to save and restore
control module and timer registers for RTC only suspend mode. Looks like
the patch title for the timer changes is a bit misleading, not all the
timer code is yet living under drivers/clocksource. But I had already
pushed out the branch before I noticed this.
* tag 'omap-for-v4.18/soc-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
OMAP: CLK: CLKSRC: Add suspend resume hooks
ARM: AM43XX: Add functions to save/restore am43xx control registers
ASoC: ams_delta: use GPIO lookup table
ARM: OMAP1: ams-delta: add GPIO lookup tables
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In MediaTek SoC chip we have multiple DAI,
such as I2S, ADDA, PCM, etc.
Organize each DAI in to one sub dai,
with its dai driver, controls, widgets, routes.
add mtk_afe_combine_sub_dai() to combine
dai driver from each DAI.
add mtk_afe_add_sub_dai_control() to register
the control, widget, routes to component.
Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The newly introduced driver causes a harmless Kconfig warning when
compile-testing random configurations:
WARNING: unmet direct dependencies detected for SND_SDMA_SOC
Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && DMA_OMAP [=n]
Selected by [y]:
- SND_OMAP_SOC [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && (ARCH_OMAP [=y] && DMA_OMAP [=n] || ARM [=y] && COMPILE_TEST [=y])
By simply allow build testing without DMA_OMAP, we can shut up that warning.
Fixes: dde637f2daf1 ("ASoC: omap: Introduce the generic_dmaengine_pcm based sdma-pcm")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Before commit 3b5b899ca67d ("ALSA: hda: Make use of core codec functions
to sync power state"), hda_set_power_state() returned the response to
the Get Power State verb, a 32-bit unsigned integer whose expected value
is 0x233 after transitioning a codec to D3, and 0x0 after transitioning
it to D0.
The response value is significant because hda_codec_runtime_suspend()
does not clear the codec's bit in the codec_powered bitmask unless the
AC_PWRST_CLK_STOP_OK bit (0x200) is set in the response value. That in
turn prevents the HDA controller from runtime suspending because
azx_runtime_idle() checks that the codec_powered bitmask is zero.
Since commit 3b5b899ca67d, hda_set_power_state() only returns 0x0 or
0x1, thereby breaking runtime PM for any HDA controller. That's because
an inline function introduced by the commit returns a bool instead of a
32-bit unsigned int. The change was likely erroneous and resulted from
copying and pasting snd_hda_check_power_state(), which is immediately
preceding the newly introduced inline function. Fix it.
Link: https://bugs.freedesktop.org/show_bug.cgi?id=106597
Fixes: 3b5b899ca67d ("ALSA: hda: Make use of core codec functions to sync power state")
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Abhijeet Kumar <abhijeet.kumar@intel.com>
Reported-and-tested-by: Gunnar Krüger <taijian@posteo.de>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Drop pci_device() macro that just leads to chip->pci->dev, and pass it
directly to request_firmware(). It was introduced for allowing the
external alsa-driver kernel module builds. Since it was discontinued
years ago, we should clean it up now.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Drop the superfluous #ifndef checks that had been put just for
allowing building the alsa-driver kernel modules externally.
Since the external build was discontinued years ago, let's clean up
the old kludges.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Now as the Amstrad Delta board provides GPIO lookup tables, switch from
GPIO numbers to GPIO descriptors and use the table to locate required
GPIO pins.
The card uses two pins, one for jack and the other for voice modem
codec DAI control.
For jack pin, remove hardcoded GPIO number and use GPIO descriptor
based variant of jack GPIO initialization.
For modem_codec pin, declare static variable for storing its GPIO
descriptor, obtain it on card initialization and replace obsolete
ams_delta_latch2_write() with gpiod_set_value(). For that to work,
don't request the modem_codec pin from the board init code anymore.
If the modem_codec GPIO lookup fails, skip initialization of
functionality of the card which depends on its availability.
Pin naming used by the driver should be followed while respective GPIO
lookup table is initialized by a board init code.
Created and tested against linux-4.17-rc3, on top of patch 1/6 "ARM:
OMAP1: ams-delta: add GPIO lookup tables"
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Power-saving is causing plops on audio start/stop on ASRock H81M-HDS
machines, add these to the power_save blacklist.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1525104
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Power-saving is causing plops on audio start/stop on Gigabyte
P55A-UD3 and Gigabyte Z87-D3HP machines, add these to the power_save
blacklist.
Note these 2 boards both use 1458:a002 as subsystem ids, so they share
a single entry.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1525104
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Power-saving is causing a plop and silences the first 2 seconds
(give or take) of audio, silencing notifications sounds on Medion /
Clevo W35xSS_370SS laptops.
Add the Clevo W35xSS_370SS to the power_save blacklist.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1581607
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Power-saving is causing a humming sound when active on the Intel
NUC7i3BNB, add it to the blacklist.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1520902
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The nau8824 codec can detect whether a headset or plain headphones is
inserted (as well as button presses on the headset) as such the jack_type
passed to snd_soc_card_jack_new() should include SND_JACK_MICROPHONE.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
some monitors care about the parity bit in the sub-frame of I2S,
but the cdn-dp always set this bit to "1", so these monitors
do not have sound output if use i2s, use spdif can fix this issue.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add "hp-mic-fix" model string for Conexant codecs so that user can
test the quirk without recompiling.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
HP Z2 G4 requires the same workaround as other HP machines that have
no mic-pin detection.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
FOr platforms that use the simple-card driver, the codec cannot be selected
through 'select' magic in Kconfig. So turn this into a real config option.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This is needed when the codec is instanciated from from a device tree.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There's no need to read the register again prior to writing it, we did
that in the beginning of the function.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The pxa-ssp driver currently assumes that .set_fmt() is called before
.set_clkdiv(), .set_pll() etc.
Commit a8bd0ee558714 ("ASoC: raumfeld: Use static DAI format setup") broke
support for Raumfeld hardware (and possible other PXA based ones) because
it effectively changed the order of these calls. Also, as the call to
.set_fmt() is now done at probe time, the port clock is not yet enabled.
To fix this, strip all hardware register access code from the .set_fmt()
callback and memorize the desired value, so we can use it from the
.hw_params() callback. Also make the .set_fmt() callback less destructive
by reading all registers that it writes to in the beginning and only
masking out the bits that it possibly fiddles with.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
match_string() returns the index of an array for a matching string,
which can be used intead of open coded variant.
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Merge Xen para-virtualized frontend driver from Oleksandr Andrushchenko.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This patch adds support to DB820c machine driver.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds support to q6asm dai driver which configures Q6ASM streams
to pass pcm data.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds support to q6afe backend dais driver.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch add support to MI2S mixers required to select path between
ASM stream and AFE ports.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds support to SLIMBus related mixers to control mux between
ASM stream and AFE port.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds support to q6 routing driver which configures route
between ASM and AFE module using ADM apis.
This driver uses dapm widgets to setup the matrix between AFE ports and
ASM streams.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds support to open, write and media format commands
in the q6asm module.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds support to memory map and unmap regions commands in
q6asm module.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds basic support to Q6 ASM (Audio Stream Manager) module on
Q6DSP. ASM supports up to 8 concurrent streams. each stream can be setup
as playback/capture. ASM provides top control functions like
Pause/flush/resume for playback and record. ASM can Create/destroy encoder,
decoder and also provides POPP dynamic services.
This patch adds support to basic features to allow hdmi playback.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds support to Q6ADM (Audio Device Manager) module in
q6dsp. ADM performs routing between audio streams and AFE ports.
It does Rate matching for streams going to devices driven by
different clocks, it handles volume ramping, Mixing with channel
and bit-width. ADM creates and destroys dynamic COPP services
for device-related audio processing as needed.
This patch adds basic support to ADM.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
With in ACP, There are three I2S controllers can be
configured/enabled ( I2S SP, I2S MICSP, I2S BT).
Default enabled I2S controller instance is I2S SP.
This patch provides required changes to support I2S BT
controller Instance.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Marking snd_soc_ops instances const
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
System clock on the platform is 25Mhz and not 24Mhz.
PLL_OUT for da7219 codec to use DA7219_PLL_FREQ_OUT_98304
as it is for 48KHz SR.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
hw_param can be called multiple times and thus we can have
more clk enable. The clk may not get diabled due to refcounting.
startup/shutdown ensures single clk enable/disable call.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
rtd structure freed early may result in kernel panic in dma close
call back. moved releasing memory for rtd structure to the end of
dma close callback.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Added sram bank variable to audio_substream_data structure.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Added pte offset variable in audio_substream_data structure.
Added Stoney related PTE offset macros in acp header file.
Modified hw_params callback to assign the pte offset value
based on asic_type.
PTE Offset macros used to calculate no of PTE entries
need to be programmed when memory allocated for audio buffer.
Depending upon allocated audio buffer size, PTE offset values
will change.
Compared to CZ, Stoney has SRAM memory limitation i.e 48k
It is required to define separate PTE Offset macros for
Stoney.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds support to LPASS Bit clock, LPASS Digital
core clock and OSR clock. These clocks are required for both
MI2S and PCM setup.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds support to 4 MI2S ports on LPASS.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds support to 6 SLIMBus AFE ports, which are used as
backend dais.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds support to Q6AFE (Audio Front End) module on Q6DSP.
AFE module sits right at the other end of cpu where the codec/audio
devices are connected.
AFE provides abstraced interfaces to both hardware and virtual devices.
Each AFE tx/rx port can be configured to connect to one of the hardware
devices like codec, hdmi, slimbus, i2s and so on. AFE services include
starting, stopping, and if needed, any configurations of the ports.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Log the correct error code in case the .open() call to a component fails.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Trivial fix to spelling mistake in snprintf literal string
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
TC Electronic Digital Konnekt x32 is an application of WaveFront DiceII STD
and doesn't support TCAT extended application protocol. For such devices,
ALSA dice driver needs to have hard-coded parameters for stream formats.
This commit adds stream format parameters for this model. Unfortunately, at
sampling transmission frequencies of 88.2/96.0kHz, I confirmed that current
ALSA dice driver doesn't drive the device appropriately due to detecting
packet discontinuities.
$ journalctl
kernel: snd_dice fw1.0: Detect discontinuity of CIP: 90 80
At the frequencies, the device transfers 16 data blocks per packet and 16
data channels per data block, as a result one packet includes 1032 bytes
if it's not NODATA. However, as long as I checked, the device often
postpone packet transmission and continue with truncated payload than
metadata in isochronous packet header. Below is a sample of sequence I got.
sec cycle bytes CIP1 CIP2
37 3314 1032 0x01100090 0x900449E2
37 3315 8 0x011000A0 0x9004FFFF
37 3316 1032 0x011000A0 0x900461E2
37 3317 1032 0x011000B0 0x900475E2
37 3318 1032 0x011000C0 0x900489E2
37 3319 8 0x011000D0 0x9004FFFF
37 3320 1032 0x011000D0 0x9004A1E2
37 3321 1032 0x011000E0 0x9004B5E2
37 3322 1032 0x011000F0 0x9004C9E2
37 3323 8 0x01100000 0x9004FFFF
37 3324 1032 0x01100000 0x9004E1E2
37 3325 1032 0x01100010 0x9004F5E2
37 3326 1032 0x01100020 0x900409E2
37 3327 8 0x01100030 0x9004FFFF
37 3328 1032 0x01100030 0x900421E2
37 3329 1032 0x01100040 0x900435E2
37 3330 (skip)
37 3331 (skip)
37 3332 (skip)
37 3333 (skip)
37 3334 (skip)
37 3335 (skip)
37 3336 (skip)
37 3337 (skip)
37 3338 (skip)
37 3339 (skip)
37 3340 (skip)
37 3341 (skip)
37 3342 (skip)
37 3343 (skip)
37 3344 (skip)
37 3345 (skip)
37 3346 (skip)
37 3347 (skip)
37 3348 (skip)
37 3349 (skip)
37 3350 (skip)
37 3351 (skip)
37 3352 (skip)
37 3353 (skip)
37 3354 (skip)
37 3355 (skip)
37 3356 (skip)
37 3357 (skip)
37 3358 (skip)
37 3359 (skip)
37 3360 (skip)
37 3361 (skip)
37 3362 (skip)
37 3363 (skip)
37 3364 (skip)
37 3365 (skip)
37 3366 (skip)
37 3367 1032 0x01100050 0x900461E1
37 3368 1032 0x01100060 0x900475E1
37 3369 1032 0x01100070 0x9004A1E1
37 3370 1032 0x01100080 0x9004A1E1 but content of payload is truncated.
37 3371 (skip)
37 3371 1032 0x01100080 0x9004B5E0 detect discontinuity
37 3372 1032 0x01100090 0x9004C9E0
37 3373 1032 0x011000A0 0x9004E1E0
37 3374 1032 0x011000B0 0x9004F5E0
37 3375 1032 0x011000C0 0x900409E0
37 3376 1032 0x011000D0 0x900421E0
37 3377 1032 0x011000E0 0x900435E0
37 3378 1032 0x011000F0 0x900449DF
37 3379 8 0x01100000 0x9004FFFF
37 3380 1032 0x01100000 0x900461DF
37 3381 1032 0x01100010 0x900475DF
37 3382 1032 0x01100020 0x900489DF
37 3383 8 0x01100030 0x9004FFFF
37 3384 1032 0x01100030 0x9004A1DF
37 3385 1032 0x01100040 0x9004B5DF
37 3386 1032 0x01100050 0x9004C9DF
37 3387 8 0x01100060 0x9004FFFF
I cannot confirm this quirks with Windows driver. ALSA dice driver has a
cause if assumed differences between these two drivers are ways of
timestampling to RX packets from the drivers to the device. I've already
reported timestamping quirk of Dice-based devices and this might bring
this issue.
[alsa-devel] Dice packet sequence quirk and ALSA firewire stack in Linux 4.6
http://mailman.alsa-project.org/pipermail/alsa-devel/2016-May/107715.html
Well, nevertheless, I enable ALSA dice driver to work at the frequencies.
This may brings inconvenience to users but I expect developers and users
to fix it.
$ cd linux-firewire-utils/src
$ python2 crpp < /sys/bus/firewire/devices/fw1/config_rom
ROM header and bus information block
-----------------------------------------------------------------
400 040423bb bus_info_length 4, crc_length 4, crc 9147
404 31333934 bus_name "1394"
408 e0ff8112 irmc 1, cmc 1, isc 1, bmc 0, pmc 0, cyc_clk_acc 255,
max_rec 8 (512), max_rom 1, gen 1, spd 2 (S400)
40c 00016604 company_id 000166 |
410 0c232c28 device_id 040c232c28 | EUI-64 000166040c232c28
root directory
-----------------------------------------------------------------
414 0006b6cb directory_length 6, crc 46795
418 03000166 vendor
41c 8100000a --> descriptor leaf at 444
420 17000030 model
424 8100000f --> descriptor leaf at 460
428 0c0087c0 node capabilities per IEEE 1394
42c d1000001 --> unit directory at 430
unit directory at 430
-----------------------------------------------------------------
430 000476c2 directory_length 4, crc 30402
434 12000166 specifier id
438 13000001 version
43c 17000030 model
440 81000010 --> descriptor leaf at 480
descriptor leaf at 444
-----------------------------------------------------------------
444 0006c490 leaf_length 6, crc 50320
448 00000000 textual descriptor
44c 00000000 minimal ASCII
450 54432045 "TC E"
454 6c656374 "lect"
458 726f6e69 "roni"
45c 63000000 "c"
descriptor leaf at 460
-----------------------------------------------------------------
460 000772b4 leaf_length 7, crc 29364
464 00000000 textual descriptor
468 00000000 minimal ASCII
46c 44696769 "Digi"
470 74616c4b "talK"
474 6f6e6e65 "onne"
478 6b747833 "ktx3"
47c 32000000 "2"
descriptor leaf at 480
-----------------------------------------------------------------
480 000772b4 leaf_length 7, crc 29364
484 00000000 textual descriptor
488 00000000 minimal ASCII
48c 44696769 "Digi"
490 74616c4b "talK"
494 6f6e6e65 "onne"
498 6b747833 "ktx3"
49c 32000000 "2"
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
HID is assumed to be made of TI PCI ID (0x104C) + part number, so all
four 104C5121, 104C5122, 104C5141 104C5142 are valid.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
Takashi Sakamoto
Colin Ian King
Olof Johansson
KaiChieh Chuang
Arnd Bergmann
Lukas Wunner
Takashi Iwai
Janusz Krzysztofik
Hans de Goede
Lin Huang
Daniel Mack
Yisheng Xie
Srinivas Kandagatla
Mukunda, Vijendar
Akshu Agrawal
Pierre-Louis Bossart