aboutsummaryrefslogtreecommitdiffstats
path: root/sound (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-08-04Merge tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-1/+1
Pull pci updates from Bjorn Helgaas: "Enumeration: - Consolidate duplicated 'next function' scanning and extend to allow 'isolated functions' on s390, similar to existing hypervisors (Niklas Schnelle) Resource management: - Implement pci_iobar_pfn() for sparc, which allows us to remove the sparc-specific pci_mmap_page_range() and pci_mmap_resource_range(). This removes the ability to map the entire PCI I/O space using /proc/bus/pci, but we believe that's already been broken since v2.6.28 (Arnd Bergmann) - Move common PCI definitions to asm-generic/pci.h and rework others to be be more specific and more encapsulated in arches that need them (Stafford Horne) Power management: - Convert drivers to new *_PM_OPS macros to avoid need for '#ifdef CONFIG_PM_SLEEP' or '__maybe_unused' (Bjorn Helgaas) Virtualization: - Add ACS quirk for Broadcom BCM5750x multifunction NICs that isolate the functions but don't advertise an ACS capability (Pavan Chebbi) Error handling: - Clear PCI Status register during enumeration in case firmware left errors logged (Kai-Heng Feng) - When we have native control of AER, enable error reporting for all devices that support AER. Previously only a few drivers enabled this (Stefan Roese) - Keep AER error reporting enabled for switches. Previously we enabled this during enumeration but immediately disabled it (Stefan Roese) - Iterate over error counters instead of error strings to avoid printing junk in AER sysfs counters (Mohamed Khalfella) ASPM: - Remove pcie_aspm_pm_state_change() so ASPM config changes, e.g., via sysfs, are not lost across power state changes (Kai-Heng Feng) Endpoint framework: - Don't stop an EPC when unbinding an EPF from it (Shunsuke Mie) Endpoint embedded DMA controller driver: - Simplify and clean up support for the DesignWare embedded DMA (eDMA) controller (Frank Li, Serge Semin) Broadcom STB PCIe controller driver: - Avoid config space accesses when link is down because we can't recover from the CPU aborts these cause (Jim Quinlan) - Look for power regulators described under Root Ports in DT and enable them before scanning the secondary bus (Jim Quinlan) - Disable/enable regulators in suspend/resume (Jim Quinlan) Freescale i.MX6 PCIe controller driver: - Simplify and clean up clock and PHY management (Richard Zhu) - Disable/enable regulators in suspend/resume (Richard Zhu) - Set PCIE_DBI_RO_WR_EN before writing DBI registers (Richard Zhu) - Allow speeds faster than Gen2 (Richard Zhu) - Make link being down a non-fatal error so controller probe doesn't fail if there are no Endpoints connected (Richard Zhu) Loongson PCIe controller driver: - Add ACPI and MCFG support for Loongson LS7A (Huacai Chen) - Avoid config reads to non-existent LS2K/LS7A devices because a hardware defect causes machine hangs (Huacai Chen) - Work around LS7A integrated devices that report incorrect Interrupt Pin values (Jianmin Lv) Marvell Aardvark PCIe controller driver: - Add support for AER and Slot capability on emulated bridge (Pali Rohár) MediaTek PCIe controller driver: - Add Airoha EN7532 to DT binding (John Crispin) - Allow building of driver for ARCH_AIROHA (Felix Fietkau) MediaTek PCIe Gen3 controller driver: - Print decoded LTSSM state when the link doesn't come up (Jianjun Wang) NVIDIA Tegra194 PCIe controller driver: - Convert DT binding to json-schema (Vidya Sagar) - Add DT bindings and driver support for Tegra234 Root Port and Endpoint mode (Vidya Sagar) - Fix some Root Port interrupt handling issues (Vidya Sagar) - Set default Max Payload Size to 256 bytes (Vidya Sagar) - Fix Data Link Feature capability programming (Vidya Sagar) - Extend Endpoint mode support to devices beyond Controller-5 (Vidya Sagar) Qualcomm PCIe controller driver: - Rework clock, reset, PHY power-on ordering to avoid hangs and improve consistency (Robert Marko, Christian Marangi) - Move pipe_clk handling to PHY drivers (Dmitry Baryshkov) - Add IPQ60xx support (Selvam Sathappan Periakaruppan) - Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru) - Add support for more than 32 MSI interrupts (Dmitry Baryshkov) Renesas R-Car PCIe controller driver: - Convert DT binding to json-schema (Herve Codina) - Add Renesas RZ/N1D (R9A06G032) to rcar-gen2 DT binding and driver (Herve Codina) Samsung Exynos PCIe controller driver: - Fix phy-exynos-pcie driver so it follows the 'phy_init() before phy_power_on()' PHY programming model (Marek Szyprowski) Synopsys DesignWare PCIe controller driver: - Simplify and clean up the DWC core extensively (Serge Semin) - Fix an issue with programming the ATU for regions that cross a 4GB boundary (Serge Semin) - Enable the CDM check if 'snps,enable-cdm-check' exists; previously we skipped it if 'num-lanes' was absent (Serge Semin) - Allocate a 32-bit DMA-able page to be MSI target instead of using a driver data structure that may not be addressable with 32-bit address (Will McVicker) - Add DWC core support for more than 32 MSI interrupts (Dmitry Baryshkov) Xilinx Versal CPM PCIe controller driver: - Add DT binding and driver support for Versal CPM5 Gen5 Root Port (Bharat Kumar Gogada)" * tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (150 commits) PCI: imx6: Support more than Gen2 speed link mode PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registers PCI: imx6: Reformat suspend callback to keep symmetric with resume PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier PCI: imx6: Disable clocks in reverse order of enable PCI: imx6: Do not hide PHY driver callbacks and refine the error handling PCI: imx6: Reduce resume time by only starting link if it was up before suspend PCI: imx6: Mark the link down as non-fatal error PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset() PCI: imx6: Turn off regulator when system is in suspend mode PCI: imx6: Call host init function directly in resume PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks PCI: imx6: Propagate .host_init() errors to caller PCI: imx6: Collect clock enables in imx6_pcie_clk_enable() PCI: imx6: Factor out ref clock disable to match enable PCI: imx6: Move imx6_pcie_clk_disable() earlier PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier PCI: imx6: Move PHY management functions together PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS() ...
2022-08-04Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32Linus Torvalds1-1/+1
Pull AVR32 updates from Hans-Christian Noren Egtvedt: "Mostly changes to documentation and comments" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32: video:backlight: remove reference to AVR32 architecture in ltv350qv video: remove support for non-existing atmel,at32ap-lcdc in atmel_lcdfb usb:udc: remove reference to AVR32 architecture in Atmel USBA Kconfig sound:spi: remove reference to AVR32 in Atmel AT73C213 DAC driver net: remove cdns,at32ap7000-macb device tree entry misc: update maintainer email address and description for atmel-ssc mfd: remove reference to AVR32 architecture in atmel-smc.c dma:dw: remove reference to AVR32 architecture in core.c
2022-08-04Merge tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdxLinus Torvalds3-36/+6
Pull SPDX updates from Greg KH: "Here is the set of SPDX comment updates for 6.0-rc1. Nothing huge here, just a number of updated SPDX license tags and cleanups based on the review of a number of common patterns in GPLv2 boilerplate text. Also included in here are a few other minor updates, two USB files, and one Documentation file update to get the SPDX lines correct. All of these have been in the linux-next tree for a very long time" * tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits) Documentation: samsung-s3c24xx: Add blank line after SPDX directive x86/crypto: Remove stray comment terminator treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE ...
2022-08-03sound:spi: remove reference to AVR32 in Atmel AT73C213 DAC driverHans-Christian Noren Egtvedt1-1/+1
The AVR32 architecture does no longer exist in the Linux kernel, hence remove a reference to it in Kconfig help text to avoid confusion. Signed-off-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
2022-07-22PCI: Move isa_dma_bridge_buggy out of asm/dma.hStafford Horne1-1/+1
The isa_dma_bridge_buggy symbol is only used for x86_32, and only x86_32 platforms or quirks ever set it. Add a new linux/isa-dma.h header that #defines isa_dma_bridge_buggy to 0 except on x86_32, where we keep it as a variable, and remove all the arch- specific definitions. [bhelgaas: commit log] Suggested-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: Christoph Hellwig <hch@infradead.org> Link: https://lore.kernel.org/r/20220722214944.831438-3-shorne@gmail.com Signed-off-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2022-07-15Merge tag 'asoc-fix-v5.19-rc4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linusTakashi Iwai1-129/+31
ASoC: Drop Rockchip BCLK management for v5.19 As covered in the second revert commit in this pull request the version of the BCLK muxing that's in v5.19 is causing issues, let's just revert it and wait for the more complete support in v5.20 instead.
2022-07-14ASoC: rockchip-i2s: Undo BCLK pinctrl changesMark Brown1-132/+31
The version of the BCLK pinctrl management changes that made it into v5.19 has caused problems on some systems due to overly strict DT requirements but attempts to fix it have caused further breakage on other platforms. Just drop the changes for this release, we already have a better version queued for -next. Fixes: 26b9f2fa7b1c ("ASoC: rockchip: i2s: Fix NULL pointer dereference when pinctrl is not found") Fixes: a5450aba737d ("ASoC: rockchip: i2s: switch BCLK to GPIO") Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220713130451.31481-1-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-13ALSA: hda/realtek - Enable the headset-mic on a Xiaomi's laptopMeng Tang1-0/+1
The headset on this machine is not defined, after applying the quirk ALC256_FIXUP_ASUS_HEADSET_MIC, the headset-mic works well Signed-off-by: Meng Tang <tangmeng@uniontech.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220713094133.9894-1-tangmeng@uniontech.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-07-13ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc221Meng Tang1-0/+12
On a HP 288 Pro G2 MT (X9W02AV), the front mic could not be detected. In order to get it working, the pin configuration needs to be set correctly, and the ALC221_FIXUP_HP_288PRO_MIC_NO_PRESENCE fixup needs to be applied. Signed-off-by: Meng Tang <tangmeng@uniontech.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220713063332.30095-1-tangmeng@uniontech.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-07-13ALSA: hda/realtek: fix mute/micmute LEDs for HP machinesJeremy Szu1-0/+4
The HP ProBook 440/450 G9 and EliteBook 640/650 G9 have multiple motherboard design and they are using different subsystem ID of audio codec. Add the same quirk for other MBs. Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220713022706.22892-1-jeremy.szu@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-07-12ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc671Meng Tang1-0/+1
On a HP 288 Pro G6, the front mic could not be detected.In order to get it working, the pin configuration needs to be set correctly, and the ALC671_FIXUP_HP_HEADSET_MIC2 fixup needs to be applied. Signed-off-by: Meng Tang <tangmeng@uniontech.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220712092222.21738-1-tangmeng@uniontech.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-07-12ALSA: hda - Add fixup for Dell Latitidue E5430Meng Tang1-0/+1
Another Dell model, another fixup entry: Latitude E5430 needs the same fixup as other Latitude E series as workaround for noise problems. Signed-off-by: Meng Tang <tangmeng@uniontech.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220712060005.20176-1-tangmeng@uniontech.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-07-11ALSA: hda/conexant: Apply quirk for another HP ProDesk 600 G3 modelMeng Tang1-0/+1
There is another HP ProDesk 600 G3 model with the PCI SSID 103c:82b4 that requires the quirk HP_MIC_NO_PRESENCE. Add the corresponding entry to the quirk table. Signed-off-by: Meng Tang <tangmeng@uniontech.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220711101744.25189-1-tangmeng@uniontech.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-07-11ALSA: hda/realtek: Fix headset mic for Acer SF313-51Meng Tang1-0/+1
The issue on Acer SWIFT SF313-51 is that headset microphone doesn't work. The following quirk fixed headset microphone issue. Note that the fixup of SF314-54/55 (ALC256_FIXUP_ACER_HEADSET_MIC) was not successful on my SF313-51. Signed-off-by: Meng Tang <tangmeng@uniontech.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220711081527.6254-1-tangmeng@uniontech.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-07-11ASoC: rockchip: i2s: Fix NULL pointer dereference when pinctrl is not foundAlexandru Elisei1-1/+4
Commit a5450aba737d ("ASoC: rockchip: i2s: switch BCLK to GPIO") switched BCLK to GPIO functions when probing the i2s bus interface, but missed adding a check for when devm_pinctrl_get() returns an error. This can lead to the following NULL pointer dereference on a rockpro64-v2 if there are no "pinctrl" properties in the i2s device tree node. Check that i2s->pinctrl is valid before attempting to search for the bclk_on and bclk_off pinctrl states. Fixes: a5450aba737d ("ASoC: rockchip: i2s: switch BCLK to GPIO") Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com> Link: https://lore.kernel.org/r/20220711130522.401551-1-alexandru.elisei@arm.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-09Merge tag 'asoc-fix-v5.19-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linusTakashi Iwai19-115/+163
ASoC: Fixes for v5.19 Quite a large batch due to things building up for a couple of weeks but all driver specific apart from Marek's documentation fix.
2022-07-07ASoC: Intel: Skylake: Correct the handling of fmt_config flexible arrayPeter Ujfalusi1-12/+25
The struct nhlt_format's fmt_config is a flexible array, it must not be used as normal array. When moving to the next nhlt_fmt_cfg we need to take into account the data behind the ->config.caps (indicated by ->config.size). The logic of the code also changed: it is no longer saves the _last_ fmt_cfg for all found rates. Fixes: bc2bd45b1f7f3 ("ASoC: Intel: Skylake: Parse nhlt and register clock device") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20220630065638.11183-3-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07ASoC: Intel: Skylake: Correct the ssp rate discovery in skl_get_ssp_clks()Peter Ujfalusi1-1/+2
The present flag is only set once when one rate has been found to be saved. This will effectively going to ignore any rate discovered at later time and based on the code, this is not the intention. Fixes: bc2bd45b1f7f3 ("ASoC: Intel: Skylake: Parse nhlt and register clock device") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20220630065638.11183-2-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07ASoC: rt5640: Fix the wrong state of JD1 and JD2Oder Chiou1-8/+22
The patch fixes the wrong state of JD1 and JD2 while the bst1 or bst2 is power on in the HDA JD using. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Reported-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/20220705101134.16792-1-oder_chiou@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07ASoC: Intel: sof_rt5682: fix out-of-bounds array accessBrent Lu1-7/+3
Starting from ADL platform we have four HDMI PCM devices which exceeds the size of sof_hdmi array. Since each sof_hdmi_pcm structure represents one HDMI PCM device, we remove the sof_hdmi array and add a new member hdmi_jack to the sof_hdmi_pcm structure to fix the out-of-bounds problem. Signed-off-by: Brent Lu <brent.lu@intel.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20220701141517.264070-1-brent.lu@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07ASoC: qdsp6: fix potential memory leak in q6apm_get_audioreach_graph()Jianglei Nie1-0/+1
q6apm_get_audioreach_graph() allocates a memory chunk for graph->graph with audioreach_alloc_graph_pkt(). When idr_alloc() fails, graph->graph is not released, which will lead to a memory leak. We can release the graph->graph with kfree() when idr_alloc() fails to fix the memory leak. Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220629182520.2164409-1-niejianglei2021@163.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07ASoC: tas2764: Fix amp gain register offset & defaultHector Martin1-2/+2
The register default is 0x28 per the datasheet, and the amp gain field is supposed to be shifted left by one. With the wrong default, the ALSA controls lie about the power-up state. With the wrong shift, we get only half the gain we expect. Signed-off-by: Hector Martin <marcan@marcan.st> Fixes: 827ed8a0fa50 ("ASoC: tas2764: Add the driver for the TAS2764") Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20220630075135.2221-4-povik+lin@cutebit.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07ASoC: tas2764: Correct playback volume rangeHector Martin1-1/+1
DVC value 0xc8 is -100dB and 0xc9 is mute; this needs to map to -100.5dB as far as the dB scale is concerned. Fix that and enable the mute flag, so alsamixer correctly shows the control as <0 dB .. -100 dB, mute>. Signed-off-by: Hector Martin <marcan@marcan.st> Fixes: 827ed8a0fa50 ("ASoC: tas2764: Add the driver for the TAS2764") Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20220630075135.2221-3-povik+lin@cutebit.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07ASoC: tas2764: Fix and extend FSYNC polarity handlingMartin Povišer2-17/+19
Fix setting of FSYNC polarity in case of LEFT_J and DSP_A/B formats. Do NOT set the SCFG field as was previously done, because that is not correct and is also in conflict with the "ASI1 Source" control which sets the same SCFG field! Also add support for explicit polarity inversion. Fixes: 827ed8a0fa50 ("ASoC: tas2764: Add the driver for the TAS2764") Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20220630075135.2221-2-povik+lin@cutebit.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07ASoC: tas2764: Add post reset delaysMartin Povišer1-2/+8
Make sure there is at least 1 ms delay from reset to first command as is specified in the datasheet. This is a fix similar to commit 307f31452078 ("ASoC: tas2770: Insert post reset delay"). Fixes: 827ed8a0fa50 ("ASoC: tas2764: Add the driver for the TAS2764") Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20220630075135.2221-1-povik+lin@cutebit.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07ASoC: arizona: Update arizona_aif_cfg_changed to use RX_BCLK_RATECharles Keepax1-2/+2
Currently the function arizona_aif_cfg_changed uses the TX_BCLK_RATE, however this register is not used on wm8998. This was not noticed as previously snd_soc_component_read did not print an error message. However, now the log gets filled with error messages, further more the test for if the LRCLK changed will return spurious results. Update the code to use the RX_BCLK_RATE register, the LRCLK parameters are written to both registers and the RX_BCLK_RATE register is used across all Arizona devices. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220628153409.3266932-4-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07ASoC: cs47l92: Fix event generation for OUT1 demuxCharles Keepax1-1/+7
cs47l92_put_demux returns the value of snd_soc_dapm_mux_update_power, which returns a 1 if a path was found for the kcontrol. This is obviously different to the expected return a 1 if the control was updated value. This results in spurious notifications to user-space. Update the handling to only return a 1 when the value is changed. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220628153409.3266932-3-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07ASoC: wm8998: Fix event generation for input muxCharles Keepax1-7/+14
wm8998_inmux_put returns the value of snd_soc_dapm_mux_update_power, which returns a 1 if a path was found for the kcontrol. This is obviously different to the expected return a 1 if the control was updated value. This results in spurious notifications to user-space. Update the handling to only return a 1 when the value is changed. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220628153409.3266932-2-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07ASoC: wm5102: Fix event generation for output compensationCharles Keepax1-4/+17
The output compensation controls always returns zero regardless of if the control value was updated. This results in missing notifications to user-space of the control change. Update the handling to return 1 when the value is changed. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220628153409.3266932-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07ASoC: wcd9335: Use int array instead of bitmask for TX mixersYassine Oudjana1-6/+11
Currently slim_tx_mixer_get reports all TX mixers as enabled when at least one is, due to it reading the entire tx_port_value bitmask without testing the specific bit corresponding to a TX port. Furthermore, using the same bitmask for all capture DAIs makes setting one mixer affect them all. To prevent this, and since the SLIM TX muxes effectively only connect to one of the mixers at a time, turn tx_port_value into an int array storing the DAI index each of the ports is connected to. Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com> Link: https://lore.kernel.org/r/20220622061745.35399-1-y.oudjana@protonmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07ASoC: tlv320adcx140: Fix tx_mask checkSascha Hauer1-7/+6
The tx_mask check doesn't reflect what the driver and the chip support. The check currently checks for exactly two slots being enabled. The tlv320adcx140 supports anything between one and eight channels, so relax the check accordingly. The tlv320adcx140 supports arbitrary tx_mask settings, but the driver currently only supports adjacent slots beginning with the first slot, so extend the check to check that the first slot is being used and that there are no holes in the tx_mask. Leave a comment to make it's the driver that limits the tx_mask settings, not the chip itself. While at it remove the set-but-unused struct adcx140p_priv::tdm_delay field. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20220624105716.2579539-1-s.hauer@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07ASoC: max98396: Fix register access for PCM format settingsDaniel Mack1-4/+6
max98396_dai_set_fmt() modifes register 2041 and touches bits in the mask 0x3a. Make sure to use the right mask for that operation. Signed-off-by: Daniel Mack <daniel@zonque.org> Link: https://lore.kernel.org/r/20220624104712.1934484-7-daniel@zonque.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07ASoC: ti: omap-mcbsp: duplicate sysfs errorDavid Owens3-31/+4
Convert to managed versions of sysfs and clk allocation to simplify unbinding and error handling in probe. Managed sysfs node creation specifically addresses the following error seen the second time probe is attempted after sdma_pcm_platform_register() previously requsted probe deferral: sysfs: cannot create duplicate filename '/devices/platform/68000000.ocp/49022000.mcbsp/max_tx_thres' Signed-off-by: David Owens <dowens@precisionplanting.com> Link: https://lore.kernel.org/r/20220620183744.3176557-1-dowens@precisionplanting.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07ASoC: audio_graph_card2: Fix port numbers in exampleSascha Hauer1-3/+3
The example in audio-graph-card2.c has multiple nodes with the same name in it. Change the port numbers to get different names. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20220624092601.2445224-1-s.hauer@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07ASoC: sgtl5000: Fix noise on shutdown/removeFrancesco Dolcini2-0/+10
Put the SGTL5000 in a silent/safe state on shutdown/remove, this is required since the SGTL5000 produces a constant noise on its output after it is configured and its clock is removed. Without this change this is happening every time the module is unbound/removed or from reboot till the clock is enabled again. The issue was experienced on both a Toradex Colibri/Apalis iMX6, but can be easily reproduced everywhere just playing something on the codec and after that removing/unbinding the driver. Fixes: 9b34e6cc3bc2 ("ASoC: Add Freescale SGTL5000 codec support") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Link: https://lore.kernel.org/r/20220624101301.441314-1-francesco.dolcini@toradex.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-05ALSA: cs46xx: Fix missing snd_card_free() call at probe errorTakashi Iwai1-9/+13
The previous cleanup with devres may lead to the incorrect release orders at the probe error handling due to the devres's nature. Until we register the card, snd_card_free() has to be called at first for releasing the stuff properly when the driver tries to manage and release the stuff via card->private_free(). This patch fixes it by calling snd_card_free() manually on the error from the probe callback. Fixes: 5bff69b3645d ("ALSA: cs46xx: Allocate resources with device-managed APIs") Cc: <stable@vger.kernel.org> Reported-and-tested-by: Jan Engelhardt <jengelh@inai.de> Link: https://lore.kernel.org/r/p2p1s96o-746-74p4-s95-61qo1p7782pn@vanv.qr Link: https://lore.kernel.org/r/20220705152336.350-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-07-04Merge tag 'asoc-fix-v5.19-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linusTakashi Iwai64-680/+1015
ASoC: Fixes for v5.19 A collection of fixes for v5.19, quite large but nothing major - a good chunk of it is more stuff that was identified by mixer-test regarding event generation.
2022-07-04ALSA: usb-audio: Add quirk for Fiero SC-01 (fw v1.0.0)Egor Vorontsov2-0/+136
The patch applies the same quirks used for SC-01 at firmware v1.1.0 to the ones running v1.0.0, with respect to hard-coded sample rates. I got two more units and successfully tested the patch series with both firmwares. The support is now complete (not accounting ASIO). Signed-off-by: Egor Vorontsov <sdoregor@sdore.me> Link: https://lore.kernel.org/r/20220627100041.2861494-2-sdoregor@sdore.me Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-07-04ALSA: usb-audio: Add quirk for Fiero SC-01Egor Vorontsov2-0/+70
Fiero SC-01 is a USB sound card with two mono inputs and a single stereo output. The inputs are composed into a single stereo stream. The device uses a vendor-provided driver on Windows and does not work at all without it. The driver mostly provides ASIO functionality, but also alters the way the sound card is queried for sample rates and clocks. ALSA queries those failing with an EPIPE (same as Windows 10 does). Presumably, the vendor-provided driver does not query it at all, simply matching by VID:PID. Thus, I consider this a buggy firmware and adhere to a set of fixed endpoint quirks instead. The soundcard has an internal clock. Implicit feedback mode is required for the playback. I have updated my device to v1.1.0 from a Windows 10 VM using a vendor- provided binary prior to the development, hoping for it to just begin working. The device provides no obvious way to downgrade the firmware, and regardless, there's no binary available for v1.0.0 anyway. Thus, I will be getting another unit to extend the patch with support for that. Expected to be a simple copy-paste of the existing one, though. There were no previous reports of that device in context of Linux anywhere. Other issues have been reported though, but that's out of the scope. Signed-off-by: Egor Vorontsov <sdoregor@sdore.me> Link: https://lore.kernel.org/r/20220627100041.2861494-1-sdoregor@sdore.me Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-07-04ALSA: hda/realtek: Add quirk for Clevo L140PUTim Crawford1-0/+1
Fixes headset detection on Clevo L140PU. Signed-off-by: Tim Crawford <tcrawford@system76.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220624144109.3957-1-tcrawford@system76.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-07-04ALSA: usb-audio: Add quirks for MacroSilicon MS2100/MS2106 devicesJohn Veness2-0/+51
Treat the claimed 96kHz 1ch in the descriptors as 48kHz 2ch, so that the audio stream doesn't sound mono. Also fix initial stream alignment, so that left and right channels are in the correct order. Signed-off-by: John Veness <john-linux@pelago.org.uk> Link: https://lore.kernel.org/r/20220624140757.28758-1-john-linux@pelago.org.uk Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-06-24ASoC: madera: Fix event generation for rate controlsCharles Keepax1-3/+3
madera_adsp_rate_put always returns zero regardless of if the control value was updated. This results in missing notifications to user-space of the control change. Update the handling to return 1 when the value is changed. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220623105120.1981154-5-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-24ASoC: madera: Fix event generation for OUT1 demuxCharles Keepax1-1/+7
madera_out1_demux_put returns the value of snd_soc_dapm_mux_update_power, which returns a 1 if a path was found for the kcontrol. This is obviously different to the expected return a 1 if the control was updated value. This results in spurious notifications to user-space. Update the handling to only return a 1 when the value is changed. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220623105120.1981154-4-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-24ASoC: cs47l15: Fix event generation for low power mux controlCharles Keepax1-1/+4
cs47l15_in1_adc_put always returns zero regardless of if the control value was updated. This results in missing notifications to user-space of the control change. Update the handling to return 1 when the value is changed. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220623105120.1981154-3-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-24ASoC: cs35l41: Add ASP TX3/4 source to register patchCharles Keepax1-2/+8
The mixer controls for ASP TX3/4 are set to values that are not included in their enumeration control. This will cause spurious event notifications when the controls are first changed, as the register value changes whilst the actual visible enumeration value does not. Use the register patch to set them to a known value, zero, which equates to zero fill, thereby avoiding the spurious notifications. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220623105120.1981154-2-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-24ASoC: dapm: Initialise kcontrol data for mux/demux controlsCharles Keepax1-0/+5
DAPM keeps a copy of the current value of mux/demux controls, however this value is only initialised in the case of autodisable controls. This leads to false notification events when first modifying a DAPM kcontrol that has a non-zero default. Autodisable controls are left as they are, since they already initialise the value, and there would be more work required to support autodisable muxes where the first option isn't disabled and/or that isn't the default. Technically this issue could affect mixer/switch elements as well, although not on any of the devices I am currently running. There is also a little more work to do to address the issue there due to that side supporting stereo controls, so that has not been tackled in this patch. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220623105120.1981154-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-24ASoC: rt711-sdca: fix kernel NULL pointer dereference when IO errorShuming Fan1-2/+2
The initial settings will be written before the codec probe function. But, the rt711->component doesn't be assigned yet. If IO error happened during initial settings operations, it will cause the kernel panic. This patch changed component->dev to slave->dev to fix this issue. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20220621090719.30558-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-24ASoC: cs35l41: Correct some control namesCharles Keepax1-6/+6
Various boolean controls on cs35l41 are missing the required "Switch" in the name, add these. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220621102041.1713504-3-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-24ASoC: wm5110: Fix DRE controlCharles Keepax1-2/+6
The DRE controls on wm5110 should return a value of 1 if the DRE state is actually changed, update to fix this. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220621102041.1713504-2-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-24ASoC: wm_adsp: Fix event for preloaderCharles Keepax1-1/+1
The preloader controls on ADSP should return a value of 1 if the preloader value was changed, update to correct this. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220621102041.1713504-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.