aboutsummaryrefslogtreecommitdiffstats
path: root/sound (follow)
AgeCommit message (Collapse)AuthorFilesLines
2009-10-27powerpc: Minor cleanup to sound/ppc/KconfigKumar Gala1-1/+1
We can replace PPC32 || PPC64 as a dependancy with just PPC as all powerpc platforms (32-bit and 64-bit) define PPC now. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-10-13Merge branch 'fix/hda' into for-linusTakashi Iwai3-8/+54
2009-10-13ALSA: hda - Allow all formats as default for Nvidia HDMITakashi Iwai1-1/+1
In the commit f0613d5752d8f7d1d02e6d40947f38877fdf9c90 ALSA: hda - Add full rates/formats support for Nvidia HDMI the flag LIMITIED_RATE_FMT_SUPPORT was set as default, as I forgot to clear before commit. Let's enable all formats/rates as default. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-13ALSA: aaci: ARM1176 aaci-pl041 AC97 register read timeoutPhilby John1-0/+1
After a reboot on an ARM1176 which amounts to a softreset, it has been noted that the ALSA driver does not get registered and the probe fails with the error "aaci-pl041 fpga:04: ac97 read back fail". In the process of reading from a register the SL1TxBusy bit is set indicating that the transceiver is busy and remains so until the default timeout occurs. Set the Power down register 0x26 to an arbitrary value as specified in the PL041 manual (page: 3-18) so that AACISL1TX/AACISL2TX registers take their default state. Signed-off-by: Philby John <pjohn@in.mvista.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-13ALSA: hda - Fix volume-knob setup for Dell laptops with STAC9228Takashi Iwai1-1/+11
The volume-knob widget needs to be set with 0x7f instead of 0xff for Dell laptops with STAC9228 codec, too, like the previous commit. Reference: Novell bnc#545013 http://bugzilla.novell.com/show_bug.cgi?id=545013 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-13ALSA: hda - Fix mute sound with STAC9227/9228 codecsTakashi Iwai1-0/+17
On FSC laptops, the sound gets muted gradually when the volume is chnaged. This is due to the wrong volume-knob widget setup. The delta bit (bit 7) shouldn't be set for these devices. This patch adds a new quirk to set the value 0x7f to the widget 0x24 instead of 0xff. Reference: Novell bnc#546006 http://bugzilla.novell.com/show_bug.cgi?id=546006 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-13ALSA: bt87x - Add a whitelist for Pinnacle PCTV (11bd:0012)Takashi Iwai1-0/+2
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-13ALSA: hda - Fix overflow of spec->init_verbs in patch_realtek.cTakashi Iwai1-1/+1
ALC861-VD lenovo model causes overflow of spec->init_verbs entries due to the recent changes. Simply increase the array size to avoid the overflow. Reported-by: Luca Tettamanti <kronos.it@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-11ALSA: ice1724 - Make call to set hw params succeed on ESI Juli@David Henningsson1-1/+1
If two streams are started immediately after one another (such as a playback and a recording stream), the call to set hw params fails with EBUSY. This patch makes the call succeed, so playback and recording will work properly. Signed-off-by: David Henningsson <launchpad.web@epost.diwic.se> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-10ALSA: ice1724: Fix surround on Chaintech AV-710Robert Hancock1-3/+5
Fix the num_total_dacs setting for Chaintech AV710. The existing comment that only PSDOUT0 is connected is correct, but since the card is using packed AC97 mode to send 6 channels to the codec, num_total_dacs should be set to 6 and not 2. This allows 6-channel surround to work. Also clarify a comment regarding the additional WM8728 codec on this card (it's connected to the SPDIF output and always receives the same data). Signed-off-by: Robert Hancock <hancockrwd@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-09ALSA: hda - Add full rates/formats support for Nvidia HDMITakashi Iwai1-6/+25
Allow Nvidia HDMI to support more possible sample rates and formats. At best, the really supported rates and formats should be determined together with the negotiation with the HDMI receiver, but it's currently not implemented yet (Nvidia stuff seems incompatible with HDMI 1.3 standard in this regard). As a compromise, we enable all bits, assuming that all recent devices do support such rates/formats. Tested-by: Alan Alan <alanwww1@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-08Merge branch 'fix/misc' into for-linusTakashi Iwai4-21/+42
2009-10-08Merge branch 'fix/hda' into for-linusTakashi Iwai1-22/+67
2009-10-08ALSA: ice1724: increase SPDIF and independent stereo buffer sizesRobert Hancock1-2/+2
Increase the default and maximum PCM buffer prellocation size for ice1724's SPDIF and independent stereo pair outputs to 256K, which is the hardware's maximum supported size. This allows a reduction in interrupt rate and potentially power usage when an application is not latency-critical. Signed-off-by: Robert Hancock <hancockrwd@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-08ALSA: opl3: circular locking in the snd_opl3_note_on() and snd_opl3_note_off()Krzysztof Helt1-8/+20
Fix following circular locking in the opl3 driver. ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.32-rc3 #87 ------------------------------------------------------- swapper/0 is trying to acquire lock: (&opl3->voice_lock){..-...}, at: [<cca748fe>] snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth] but task is already holding lock: (&opl3->sys_timer_lock){..-...}, at: [<cca75169>] snd_opl3_timer_func+0x19/0xc0 [snd_opl3_synth] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&opl3->sys_timer_lock){..-...}: [<c02461d5>] validate_chain+0xa25/0x1040 [<c0246aca>] __lock_acquire+0x2da/0xab0 [<c024731a>] lock_acquire+0x7a/0xa0 [<c044c300>] _spin_lock_irqsave+0x40/0x60 [<cca75046>] snd_opl3_note_on+0x686/0x790 [snd_opl3_synth] [<cca68912>] snd_midi_process_event+0x322/0x590 [snd_seq_midi_emul] [<cca74245>] snd_opl3_synth_event_input+0x15/0x20 [snd_opl3_synth] [<cca4dcc0>] snd_seq_deliver_single_event+0x100/0x200 [snd_seq] [<cca4de07>] snd_seq_deliver_event+0x47/0x1f0 [snd_seq] [<cca4e50b>] snd_seq_dispatch_event+0x3b/0x140 [snd_seq] [<cca5008c>] snd_seq_check_queue+0x10c/0x120 [snd_seq] [<cca5037b>] snd_seq_enqueue_event+0x6b/0xe0 [snd_seq] [<cca4e0fd>] snd_seq_client_enqueue_event+0xdd/0x100 [snd_seq] [<cca4eb7a>] snd_seq_write+0xea/0x190 [snd_seq] [<c02827b6>] vfs_write+0x96/0x160 [<c0282c9d>] sys_write+0x3d/0x70 [<c0202c45>] syscall_call+0x7/0xb -> #0 (&opl3->voice_lock){..-...}: [<c02467e6>] validate_chain+0x1036/0x1040 [<c0246aca>] __lock_acquire+0x2da/0xab0 [<c024731a>] lock_acquire+0x7a/0xa0 [<c044c300>] _spin_lock_irqsave+0x40/0x60 [<cca748fe>] snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth] [<cca751f0>] snd_opl3_timer_func+0xa0/0xc0 [snd_opl3_synth] [<c022ac46>] run_timer_softirq+0x166/0x1e0 [<c02269e8>] __do_softirq+0x78/0x110 [<c0226ac6>] do_softirq+0x46/0x50 [<c0226e26>] irq_exit+0x36/0x40 [<c0204bd2>] do_IRQ+0x42/0xb0 [<c020328e>] common_interrupt+0x2e/0x40 [<c021092f>] apm_cpu_idle+0x10f/0x290 [<c0201b11>] cpu_idle+0x21/0x40 [<c04443cd>] rest_init+0x4d/0x60 [<c055c835>] start_kernel+0x235/0x280 [<c055c066>] i386_start_kernel+0x66/0x70 other info that might help us debug this: 2 locks held by swapper/0: #0: (&opl3->tlist){+.-...}, at: [<c022abd0>] run_timer_softirq+0xf0/0x1e0 #1: (&opl3->sys_timer_lock){..-...}, at: [<cca75169>] snd_opl3_timer_func+0x19/0xc0 [snd_opl3_synth] stack backtrace: Pid: 0, comm: swapper Not tainted 2.6.32-rc3 #87 Call Trace: [<c0245188>] print_circular_bug+0xc8/0xd0 [<c02467e6>] validate_chain+0x1036/0x1040 [<c0247f14>] ? check_usage_forwards+0x54/0xd0 [<c0246aca>] __lock_acquire+0x2da/0xab0 [<c024731a>] lock_acquire+0x7a/0xa0 [<cca748fe>] ? snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth] [<c044c300>] _spin_lock_irqsave+0x40/0x60 [<cca748fe>] ? snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth] [<cca748fe>] snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth] [<c044c307>] ? _spin_lock_irqsave+0x47/0x60 [<cca751f0>] snd_opl3_timer_func+0xa0/0xc0 [snd_opl3_synth] [<c022ac46>] run_timer_softirq+0x166/0x1e0 [<c022abd0>] ? run_timer_softirq+0xf0/0x1e0 [<cca75150>] ? snd_opl3_timer_func+0x0/0xc0 [snd_opl3_synth] [<c02269e8>] __do_softirq+0x78/0x110 [<c044c0fd>] ? _spin_unlock+0x1d/0x20 [<c025915f>] ? handle_level_irq+0xaf/0xe0 [<c0226ac6>] do_softirq+0x46/0x50 [<c0226e26>] irq_exit+0x36/0x40 [<c0204bd2>] do_IRQ+0x42/0xb0 [<c024463c>] ? trace_hardirqs_on_caller+0x12c/0x180 [<c020328e>] common_interrupt+0x2e/0x40 [<c0208d88>] ? default_idle+0x38/0x50 [<c021092f>] apm_cpu_idle+0x10f/0x290 [<c0201b11>] cpu_idle+0x21/0x40 [<c04443cd>] rest_init+0x4d/0x60 [<c055c835>] start_kernel+0x235/0x280 [<c055c210>] ? unknown_bootoption+0x0/0x210 [<c055c066>] i386_start_kernel+0x66/0x70 Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-08ALSA: ICE1712/24 - Change the Multi Track Peak control (level meters) from MIXER to PCM typePavel Hofman2-2/+2
* PLEASE NOTE - this change requires the corresponding update of envy24control for ice1712 - kind of an ABI change. * The "Multi Track Peak" control is read-only level meters indicator. * The control is VERY confusing to most users since it is currently displayed in regular mixers. E.g. alsamixer ignores its read-only status and allows changing the levels with keys which makes no sense. Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Acked-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-07ALSA: hda - Fix yet another auto-mic bug in ALC268Takashi Iwai1-1/+3
Since patch_alc268() doesn't call set_capture_mixer() (due to its h/w design different from other siblings), it needs to call fixup_automic_adc() explicitly to set up the auto-mic routing. Otherwise the indices for int/ext mics aren't set properly. Reference: Novell bnc#544899 http://bugzilla.novell.com/show_bug.cgi?id=544899 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-06Merge branch 'upstream/wm8350' into for-2.6.32Mark Brown1-2/+2
2009-10-06ASoC: WM8350 capture PGA mutes are invertedMark Brown1-2/+2
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2009-10-06ASoC: Remove absent SYNC and TDM DAI format options from i.MX SSIMark Brown1-8/+0
These should be handled via set_tdm_slot() now and cause build failures as-is. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-06sound: via82xx: move DXS volume controls to PCM interfaceClemens Ladisch1-9/+18
The "VIA DXS" controls are actually volume controls that apply to the four PCM substreams, so we better indicate this connection by moving the controls to the PCM interface. Commit b452e08e73c0e3dbb0be82130217be4b7084299e in 2.6.30 broke the restoring of these volumes by "alsactl restore" that most distributions use; the renaming in this patch cures that regression by preventing alsactl from applying the old, wrong volume levels to the new controls. http://bugzilla.kernel.org/show_bug.cgi?id=14151 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=532613 Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-06ALSA: hda - Don't pick up invalid HP pins in alc_subsystem_id()Takashi Iwai1-3/+8
alc_subsystem_id() tries to pick up a headphone pin if not configured, but this caused side-effects as the problem in commit 15870f05e90a365f8022da416e713be0c5024e2f. This patch fixes the driver behavior to pick up invalid HP pins; at least, the pins that are listed as the primary outputs aren't taken any more. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-06Merge branch 'for-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into for-2.6.32Mark Brown2-3/+4
2009-10-06ALSA: hda - Add a workaround for ASUS A7KTakashi Iwai1-11/+48
ASUS A7K needs additional GPIO1 bit setup; it has to be cleared. Added a new fixup hook for this laptop so that it works as is. Refernece: Novell bnc#494309 http://bugzilla.novell.com/show_bug.cgi?id=494309 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-05ALSA: hda - Fix invalid initializations for ALC861 auto modeTakashi Iwai1-7/+8
The recent auto-parser doesn't work for machines with a single output with ALC861, such as Toshiba laptops, because alc_subsystem_id() sets the hp_pins[0] while it's listed in line_outs[0]. This ends up with the doubled initialization of the same mixer widget, and it mutes the DAC route because hp_pins has no DAC assigned. To fix this problem, just check spec->autocfg.hp_outs and speaker_outs so that they are really detected pins. Reference: Novell bnc#544161 http://bugzilla.novell.com/show_bug.cgi?id=544161 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-03Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds23-256/+511
* 'for-linus' of ssh://master.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (21 commits) ALSA: usb - Use strlcat() correctly ALSA: Fix invalid __exit in sound/mips/*.c ALSA: hda - Fix / improve ALC66x parser ALSA: ctxfi: Swapped SURROUND-SIDE mute sound: Make keywest_driver static ALSA: intel8x0 - Mute External Amplifier by default for Sony VAIO VGN-B1VP ALSA: hda - Fix digita/analog mic auto-switching with IDT codecs ASoC: fix kconfig order of Blackfin drivers ALSA: hda - Added quirk to enable sound on Toshiba NB200 ASoC: Fix dependency of CONFIG_SND_PXA2XX_SOC_IMOTE2 ALSA: Don't assume i2c device probing always succeeds ALSA: intel8x0 - Mute External Amplifier by default for Sony VAIO VGN-T350P ALSA: echoaudio - Re-enable the line-out control for the Mia card ALSA: hda - Resurrect input-source mixer of ALC268 model=acer ALSA: hda - Analog Devices AD1984A add HP Touchsmart model ALSA: hda - Add HP Pavilion dv4t-1300 to MSI whitelist ALSA: hda - CD-audio sound for hda-intel conexant benq laptop ASoC: DaVinci: Correct McASP FIFO initialization ASoC: Davinci: Fix race with cpu_dai->dma_data ASoC: DaVinci: Fix divide by zero error during 1st execution ...
2009-10-03Merge branch 'fix/hda' into for-linusTakashi Iwai5-94/+322
2009-10-03Merge branch 'fix/asoc' into for-linusTakashi Iwai16-165/+155
2009-10-02ASoC: wm8940: Fix check on error code form snd_soc_codec_set_cache_ioJonathan Cameron1-1/+1
Fix for typo in commit 8d50e447d19fec64adebeef55f2b60d695435412 ASoC: Factor out I/O for Wolfson 8 bit data 16 bit register CODECs Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-02ALSA: usb - Use strlcat() correctlyTakashi Iwai1-9/+14
Don't pass the advanced position to strlcat() but just gives the buffer head position so that the max size limit can be checked correctly. Introduced a new helper function to standaralize strlcat() calls. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-02ASoC: Fix SND_SOC_DAPM_LINE handlingPeter Ujfalusi1-2/+3
Since the SND_SOC_DAPM_LINE can be input or output, additional check is needed in order to determine if the widget is connected as input or output. When checking for connected outputs, if the widget is line, than check if the sources list is not empty (line is connected as output) For input endpoint check, when the widget is line, also check if the sinks list is not empty (line is connected as input). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-02ALSA: Fix invalid __exit in sound/mips/*.cTakashi Iwai2-2/+2
The remove callback has to be marked as __devexit, as the dynamic unbind is possible. Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-02ALSA: hda - Fix / improve ALC66x parserTakashi Iwai1-86/+155
The auto-parser for ALC662/663/272 codecs doesn't work properly when a speaker is connected to mono NID 0x17, and doesn't handle the dynamic DAC assignment properly. This patch fixes the issues and also improves the assignment of DACs so that HP and speakers can have independent volume controls. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-02ALSA: ctxfi: Swapped SURROUND-SIDE muteSven Eckelmann1-2/+2
On Soundblaster X-FI Titenium with emu20k2 the SIDE and SURROUND mute functions are swapped. It was checked with 'speaker-test -c 8 -s 3' and (un)mute surround or 'speaker-test -c 8 -s 7' and (un)mute side. The volume seems not to be affected and works as expected. Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-02sound: Make keywest_driver staticJean Delvare1-1/+1
I can't see any reason for struct i2c_driver keywest_driver to not be static. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-02ALSA: intel8x0 - Mute External Amplifier by default for Sony VAIO VGN-B1VPDaniel T Chen1-0/+6
BugLink: https://bugs.launchpad.net/bugs/410933 This Sony VAIO model also needs External Amplifier unmuted for audible playback, so make sure we set the inv_eapd quirk. Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-01ALSA: hda - Fix digita/analog mic auto-switching with IDT codecsTakashi Iwai1-6/+14
When the auto-mic switching between an analog and a digital mic is needed with IDT codecs, the current driver doesn't reset the connection of the digital mux. This patch fixes the behavior by checking both mux connections properly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-01Merge remote branch 'takashi/fix/asoc' into for-2.6.32Mark Brown1-1/+1
2009-10-01ASoC: fix kconfig order of Blackfin driversBarry Song1-49/+49
Some of the Blackfin options don't directly follow the kconfig options they depend on, so kconfig is unable to display the proper tree. So sort the options such they expand/collapse properly. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-01ALSA: hda - Added quirk to enable sound on Toshiba NB200Manoj Iyer1-0/+1
Patch was tested on Toshiba NB200 and is found to enable sound. Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com> Cc: stable@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-01ASoC: Fix dependency of CONFIG_SND_PXA2XX_SOC_IMOTE2Takashi Iwai1-1/+1
wm8940 requires I2C. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-01ALSA: Don't assume i2c device probing always succeedsTakashi Iwai2-0/+21
The client->driver pointer can be NULL when i2c-device probing fails in i2c_new_device(). This patch adds the NULL checks for client->driver and return the error instead of blind assumption of driver availability. Reported-by: Tim Shepard <shep@alum.mit.edu> Cc: Jean Delvare <khali@linux-fr.org> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-01ALSA: intel8x0 - Mute External Amplifier by default for Sony VAIO VGN-T350PDaniel T Chen1-0/+6
BugLink: https://bugs.launchpad.net/bugs/410933 This Sony VAIO model needs External Amplifier unmuted for audible playback, so make sure we set the inv_eapd quirk. Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-30ALSA: echoaudio - Re-enable the line-out control for the Mia cardGiuliano Pochini2-4/+27
Mia has an undocumented line-out control, and it has to be exposed. Signed-off-by: Giuliano Pochini <pochini@shiny.it> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-30ALSA: hda - Resurrect input-source mixer of ALC268 model=acerTakashi Iwai1-1/+1
In the commit fdbc66266c21976027938642f60e0f047149a61a, I mistakenly replaced the capture mixer array for ALC268_ACER to nosrc version although this should be kept to alt_mixer. Now fixed back. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-29ALSA: hda - Analog Devices AD1984A add HP Touchsmart modelMiguel de Barros1-0/+139
Reference: ALSA bug #0004614 https://bugtrack.alsa-project.org/alsa-bug/view.php?id=4614 port-A (0x11) - front hp-out port-D (0x12) - rear line out port-E (0x1c) - front mic-in port-F (0x16) - Internal speakers digital-mic (0x17) - Internal mic init verbs, mixers, jack sensing and PCI_QUIRK to support this hardware Signed-off-by: Miguel de Barros <miguel.de.barros@bluewin.ch> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-27const: mark struct vm_struct_operationsAlexey Dobriyan4-7/+7
* mark struct vm_area_struct::vm_ops as const * mark vm_ops in AGP code But leave TTM code alone, something is fishy there with global vm_ops being used. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24Merge branch 'origin' into for-linusRussell King19-187/+74
Conflicts: MAINTAINERS
2009-09-24ALSA: hda - Add HP Pavilion dv4t-1300 to MSI whitelistDaniel T Chen1-0/+1
BugLink: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=547994 Enable MSI by default for this Pavilion model. Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-24ALSA: hda - CD-audio sound for hda-intel conexant benq laptopLukasz Marcinowski1-1/+11
After puting a cd-audio inside my laptop there was no sound out here, so I decided to install alsa-driver with debug level and setup a model=test, it didn't help, but then I look at source code and added this few lines, now cd-audio is working both when playback/recording. [Additional minor fixes of mixer element/item names by tiwai] Signed-off-by: Lukasz Marcinowski <nowymarluk@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.